mirror of
https://github.com/trezor/trezor-firmware.git
synced 2024-12-17 11:58:13 +00:00
8.7 KiB
8.7 KiB
Changelog
All notable changes to this project will be documented in this file.
The format is based on Keep a Changelog.
1.10.0 [unreleased]
Added
- Public key to ECDHSessionKey. #1518
Changed
- Allow decreasing the output value in RBF transactions. #1491
- Support long PIN of up to 50 digits. #1167
Deprecated
Removed
Fixed
Security
1.9.4 [10th February 2021]
Added
- Replacement transaction signing for replace-by-fee. #1367
- Support for Output Descriptors export. #1363
- Show Ypub/Zpub correctly for multisig GetAddress. #1415
- Show amounts in mBTC, uBTC and sat denominations. #1369
Changed
- Bump nanopb dependency to 0.4.3. #1105
- Bump nanopb dependency to 0.4.4. #1402
- Minimum auto-lock delay to 1 minute. The former value of 10 seconds still applies for debug builds. #1351
Deprecated
Removed
- PIVX support.
Fixed
Security
1.9.3 [2nd September 2020]
Added
- XVG support. #1165
- Ask user to confirm custom nLockTime.
Changed
- Print inverted question mark for non-printable characters.
- Allow spending coins from Bitcoin paths if the coin has implemented strong replay protection via
SIGHASH_FORKID
. #1188
Deprecated
Removed
- ETP, GIN, PTC, ZEL support.
Fixed
Security
- Show non-empty passphrase on device when it was entered on host.
1.9.2 [5th August 2020]
Added
- Set initialized in storage to false if no mnemonic is present. #965
- Support multiple change-outputs. #1098
Changed
Features.pin_cached
renamed tounlocked
, and it is nowtrue
even if PIN is not set.
Fixed
- Re-introduce ability to spend pre-Overwinter UTXO on Zcash-like coins. #1030
Security
- Adds a security check to prevent potential issues with paths used in altcoin transactions.
1.9.1 [June 2020]
Security
- Stream previous tx also for Segwit inputs.
1.9.0 [April 2020]
Added
- Wipe code.
- Cache up to 10 sessions (passphrases).
- Add feature to retrieve the next U2F counter.
Changed
- Make LoadDevice debug only and drop its XPRV feature.
- Passphrase redesign.
- Update nanopb api to version 0.4.
Fixed
- Disallow changing of settings via dry-run recovery.
- Show xpubs with multisig get_address.
1.8.3 [September 2019]
Fixed
- Small code improvements.
1.8.2 [August 2019]
Fixed
- OLED display security improvements.
- Fix display of non-divisible OMNI amounts.
1.8.1 [May 2019]
Fixed
- Fix fault when using the device with no PIN.
- Fix OMNI transactions parsing.
1.8.0 [February 2019]
Added
- New coins: ATS, KMD, XPM, XSN, ZCL.
- New ETH tokens.
Changed
- Included bootloader 1.8.0.
Fixed
- Stellar and NEM fixes.
Security
- Security improvements.
- Upgraded to new storage format.
1.7.3 [December 2018]
Fixed
- Fix USB issue on some Windows 10 installations.
1.7.2 [December 2018]
Added
- Add support for OMNI layer: OMNI/MAID/USDT.
Changed
- Included bootloader 1.6.1.
Fixed
- U2F fixes.
- Don't ask for PIN if it has been just set.
1.7.1 [October 2018]
Added
- Add support for Lisk.
- Add support for Zcash Sapling hardfork.
- Implement seedless setup.
1.7.0 [September 2018]
Added
- Add support for Stellar.
Changed
- Switch from HID to WebUSB.
- Included bootloader 1.6.0.
1.6.3 [August 2018]
Added
- Implement RSKIP-60 Ethereum checksum encoding.
- Add support for new Ethereum networks (ESN, AKA, ETHO, MUSI, PIRL, ATH, GO).
- Add support for new 80 Ethereum tokens.
Changed
- Included bootloader 1.5.1.
Security
- Improve MPU configuration.
1.6.2 [June 2018]
Added
- Add possibility to set custom auto-lock delay.
- Bitcoin Cash cashaddr support.
- Zcash Overwinter hardfork support.
- Support for new coins (DCR, BTCP, FUJI, GRS, VTC, VIA, XZC).
- Support for new Ethereum networks (EOSC, ETHS, ELLA, CTL, EGEM, WAN).
- Support for 500+ new Ethereum tokens.
Changed
- Included bootloader 1.5.0.
1.6.1 [March 2018]
Changed
- Use fixed-width font for addresses.
- Lots of under-the-hood improvements.
- Included bootloader 1.4.0.
Fixed
- Fixed issue with write-protection settings.
1.6.0 [November 2017]
Added
- Native SegWit (Bech32) address support.
- Show recognized BIP44/BIP49 paths in GetAddress dialog.
- NEM support.
- Expanse and UBIQ chains support.
- Support or new coins (BTG, DGB, MONA).
- Ed25519 collective signatures (CoSi) support.
1.5.2 [August 2017]
Security
- Clean memory on start.
- Fix storage import from older versions.
1.5.1 [July 2017]
Added
- Enable Segwit for Bitcoin.
- Bcash aka Bitcoin Cash support.
- Message signing/verification for Ethereum and Segwit.
- Use checksum for Ethereum addresses.
- Add more ERC-20 tokens, handle unrecognized ERC-20 tokens.
- Allow "dry run" recovery procedure.
- Allow separated backup procedure.
Changed
- Make address dialog nicer (switch text/QR via button).
Security
- Wipe storage after 16 wrong PIN attempts.
1.5.0 [May 2017]
Added
- Enable Segwit for Testnet and Litecoin.
- Enable ERC-20 tokens for Ethereum chains.
1.4.2 [January 2017]
Added
- New Matrix-based recovery method.
Fixed
- Minor Ethereum fixes (including EIP-155 replay protection).
- Minor USB, U2F and GPG fixes.
1.4.1 [October 2016]
Added
- Support for Zcash JoinSplit transactions.
- Enable device lock after 10 minutes of inactivity.
- Enable device lock by pressing left button for 2 seconds.
- Confirm dialog for U2F counter change.
1.4.0 [August 2016]
Added
- U2F support.
- Ethereum support.
- GPG decryption support.
- Zcash support.
1.3.6 [June 2016]
Added
- Enable advanced transactions such as ones with REPLACE-BY-FEE and CHECKLOCKTIMEVERIFY.
- Message verification now shows address.
- Enable GPG signing support.
- Enable Ed25519 curve (for SSH and GPG).
- Use separate deterministic hierarchy for NIST256P1 and Ed25519 curves.
- Users using SSH already need to regenerate their keys using the new firmware!
Fixed
- Fix message signing for altcoins.
1.3.5 [February 2016]
Changed
- Double size font for recovery words during the device setup.
Fixed
- Optimizations for simultaneous access when more applications try communicate with the device.
1.3.4 [August 2015]
Added
- Screensaver active on ClearSession message.
- Support for NIST P-256 curve.
- Show seconds counter during PIN lockdown.
Changed
- Updated SignIdentity to v2 format.
- Updated maxfee per kb for coins.
1.3.3 [April 2015]
Added
- Ask for PIN on GetAddress and GetPublicKey.
Fixed
- Signing speed improved.
1.3.2 [March 2015]
Added
- Login feature via SignIdentity message.
- GetAddress for multisig shows M of N description.
Fixed
- Fix check during transaction streaming.
Security
- PIN checking in constant time.
1.3.1 [February 2015]
Added
- Enabled OP_RETURN.
- Added option to change home screen.
Changed
- Optimized signing speed.
- Moved fee calculation before any signing.
Fixed
- Made PIN delay increase immune against hardware hacking.
1.3.0 [December 2014]
Added
- Added multisig support.
- Added visual validation of receiving address.
- Added ECIES encryption capabilities.
1.2.1 [July 2014]
Added
- Added stack overflow protection.
- Added compatibility with Trezor Bridge.
1.2.0 [July 2014]
Changed
- Better UI for signing/verifying messages.
- Smaller firmware size.
Fixed
- Fix false positives for fee warning.
1.1.0 [June 2014]
Added
- Added AES support.
Fixed
- Minor UI fixes.
- Better handling of unexpected messages.
1.0.0 [April 2014]
Added
- Added support for streaming of transactions into the device.
Fixed
- Removed all current limits on size of signed transaction.