mirror of
https://github.com/trezor/trezor-firmware.git
synced 2024-12-22 22:38:08 +00:00
95 lines
1.9 KiB
Markdown
95 lines
1.9 KiB
Markdown
# Build instructions
|
|
|
|
## Build instructions for Emulator (Unix port)
|
|
|
|
Run the following to checkout the project:
|
|
|
|
```sh
|
|
git clone --recursive https://github.com/trezor/trezor-core.git
|
|
cd trezor-core
|
|
```
|
|
|
|
### Linux
|
|
|
|
#### Debian/Ubuntu
|
|
|
|
```sh
|
|
sudo pip3 install --no-cache-dir pyblake2
|
|
|
|
sudo dpkg --add-architecture i386
|
|
sudo apt-get update
|
|
sudo apt-get install scons libsdl2-dev:i386 libsdl2-image-dev:i386 gcc-multilib
|
|
|
|
make build_unix
|
|
```
|
|
|
|
#### Fedora
|
|
|
|
```sh
|
|
sudo pip3 install --no-cache-dir pyblake2
|
|
|
|
sudo yum install scons SDL2-devel.i686 SDL2_image-devel.i686
|
|
|
|
make build_unix
|
|
```
|
|
|
|
#### openSUSE
|
|
|
|
```sh
|
|
sudo pip3 install --no-cache-dir pyblake2
|
|
|
|
sudo zypper install scons libSDL2-devel-32bit libSDL2_image-devel-32bit
|
|
|
|
make build_unix
|
|
```
|
|
|
|
#### Arch
|
|
|
|
```sh
|
|
sudo pip3 install --no-cache-dir pyblake2
|
|
|
|
sudo pacman -S gcc-multilib scons lib32-sdl2 lib32-sdl2_image
|
|
|
|
make build_unix
|
|
```
|
|
|
|
### OS X
|
|
|
|
```sh
|
|
pip3 install --no-cache-dir pyblake2
|
|
|
|
brew install scons sdl2 sdl2_image
|
|
|
|
make build_unix
|
|
```
|
|
|
|
### Windows
|
|
|
|
Not supported yet ...
|
|
|
|
## Build instructions for Embedded (ARM port)
|
|
|
|
### Linux
|
|
|
|
For flashing firmware to blank device (without bootloader) use `make flash`,
|
|
or `make flash STLINK_VER=v2-1` if using a ST-LINK/V2.1 interface.
|
|
You need to have OpenOCD installed.
|
|
|
|
#### Debian/Ubuntu
|
|
|
|
```sh
|
|
sudo pip3 install --no-cache-dir click pyblake2 scons
|
|
sudo pip3 install --no-deps git+https://github.com/trezor/python-trezor.git@master
|
|
|
|
sudo apt-get install gcc-arm-none-eabi libnewlib-arm-none-eabi
|
|
|
|
make vendorheader build_boardloader build_bootloader build_firmware
|
|
```
|
|
|
|
### OS X
|
|
|
|
1. Download [gcc-arm-none-eabi](https://launchpad.net/gcc-arm-embedded/5.0/5-2016-q3-update/)
|
|
2. Follow the [install instructions](https://launchpadlibrarian.net/287100883/readme.txt)
|
|
3. To install OpenOCD, run `brew install open-ocd`
|
|
4. Run `make vendorheader build_boardloader build_bootloader build_firmware`
|