mirror of
https://github.com/trezor/trezor-firmware.git
synced 2024-12-16 03:18:09 +00:00
77 lines
3.5 KiB
Markdown
77 lines
3.5 KiB
Markdown
# Trezor One Bootloader and Firmware
|
|
|
|
[](https://travis-ci.org/trezor/trezor-mcu) [](https://gitter.im/trezor/community)
|
|
|
|
https://trezor.io/
|
|
|
|
## How to build the Trezor bootloader, firmware and emulator
|
|
|
|
Ensure that you have Docker installed. You can follow [Docker's installation instructions](https://docs.docker.com/engine/installation/).
|
|
|
|
Clone this repository:
|
|
```sh
|
|
git clone https://github.com/trezor/trezor-mcu.git`
|
|
cd trezor-mcu
|
|
```
|
|
|
|
Use the `build.sh` command to build the images.
|
|
|
|
* to build bootloader 1.6.0 and firmware 1.7.0:
|
|
```sh
|
|
./build.sh bl1.6.0 v1.7.0
|
|
```
|
|
* to build latest firmware from master:
|
|
```sh
|
|
./build.sh
|
|
```
|
|
* to build the emulator from master:
|
|
```sh
|
|
./build.sh EMU
|
|
```
|
|
* to build the emulator for version 1.7.0:
|
|
```sh
|
|
./build.sh EMU v1.7.0
|
|
```
|
|
|
|
Build results are stored in the `build/` directory. File `bootloader-<tag>.bin` represents
|
|
the bootloader, `trezor-<tag>.bin` is the firmware image, and `trezor-emulator-<tag>.elf`
|
|
is the emulator executable.
|
|
|
|
You can use `TREZOR_OLED_SCALE` environment variable to make emulator screen bigger.
|
|
|
|
## How to get fingerprint of firmware signed and distributed by SatoshiLabs?
|
|
|
|
1. Pick version of firmware binary listed on https://wallet.trezor.io/data/firmware/1/releases.json
|
|
2. Download it: `wget -O trezor.signed.bin https://wallet.trezor.io/data/firmware/1/trezor-1.6.1.bin`
|
|
3. Compute fingerprint: `tail -c +257 trezor.signed.bin | sha256sum`
|
|
|
|
Step 3 should produce the same sha256 fingerprint like your local build (for the same version tag). Firmware has a special header (of length 256 bytes) holding signatures themselves, which must be avoided while calculating the fingerprint, that's why tail command has to be used.
|
|
|
|
## How to install custom built firmware?
|
|
|
|
**WARNING: This will erase the recovery seed stored on the device! You should never do this on Trezor that contains coins!**
|
|
|
|
1. Install python-trezor: `pip install trezor` ([more info](https://github.com/trezor/python-trezor))
|
|
2. `trezorctl firmware_update -f build/trezor-TAG.bin`
|
|
|
|
*Note: if your device is on the latest bootloader version and you flash custom firmware then you will receive a hard fault warning when booting the firmware image. To avoid this issue, just remove the code in startup.s added by [this commit](https://github.com/trezor/trezor-firmware/commit/222c9ea46c7574cb52d4713c481438a32b85e692#diff-178d0ab7c4debbcf430a0fad8fa06a5c).*
|
|
|
|
## Building for development
|
|
|
|
If you want to build device firmware, make sure you have the
|
|
[GNU ARM Embedded toolchain](https://developer.arm.com/open-source/gnu-toolchain/gnu-rm/downloads) installed.
|
|
You will also need Python 3.5 or later and [pipenv](https://pipenv.readthedocs.io/en/latest/install/).
|
|
|
|
* If you want to build the emulator instead of the firmware, run `export EMULATOR=1`
|
|
* If you want to build with the debug link, run `export DEBUG_LINK=1`. Use this if you want to run the device tests.
|
|
* When you change these variables, use `script/setup` to clean the repository
|
|
|
|
1. To initialize the repository, run `script/setup`
|
|
2. To initialize a Python environment, run `pipenv install`
|
|
3. To build the firmware or emulator, run `pipenv run script/cibuild`
|
|
|
|
If you are building device firmware, the firmware will be in `firmware/trezor.bin`.
|
|
|
|
You can launch the emulator using `firmware/trezor.elf`. To use `trezorctl` with the emulator, use
|
|
`trezorctl -p udp` (for example, `trezorctl -p udp get_features`).
|