mirror of
https://github.com/trezor/trezor-firmware.git
synced 2024-12-22 22:38:08 +00:00
2.0 KiB
2.0 KiB
TREZOR Core
This is the core of the upcoming TREZOR v2.
Documentation
Build instructions for emulator
Run the following to checkout the project:
git clone --recursive https://github.com/trezor/trezor-core.git
cd trezor-core
Linux
Debian/Ubuntu
sudo pip3 install --no-cache-dir pyblake2
sudo dpkg --add-architecture i386
sudo apt-get update
sudo apt-get install scons libsdl2-dev:i386 libsdl2-image-dev:i386 gcc-multilib
make build_unix
Fedora
sudo pip3 install --no-cache-dir pyblake2
sudo yum install scons SDL2-devel.i686 SDL2_image-devel.i686
make build_unix
openSUSE
sudo pip3 install --no-cache-dir pyblake2
sudo zypper install scons libSDL2-devel-32bit libSDL2_image-devel-32bit
make build_unix
Arch
sudo pip3 install --no-cache-dir pyblake2
sudo pacman -S gcc-multilib scons lib32-sdl2 lib32-sdl2_image
make build_unix
OS X
pip3 install --no-cache-dir pyblake2
brew install scons sdl2 sdl2_image
make build_unix
Windows
Not supported yet ...
Build instructions for ARM
Linux
For flashing firmware to blank device (without bootloader) use make flash
,
or make flash STLINK_VER=v2-1
if using a ST-LINK/V2.1 interface.
Debian/Ubuntu
sudo pip3 install --no-cache-dir pyblake2
sudo apt-get install gcc-arm-none-eabi libnewlib-arm-none-eabi
make build_boardloader build_bootloader build_firmware
OS X
- Download gcc-arm-none-eabi
- Follow the install instructions
- To install stlink, run
brew install stlink
- Run
make build_boardloader build_bootloader build_firmware