mirror of
https://github.com/trezor/trezor-firmware.git
synced 2024-12-15 10:58:09 +00:00
89 lines
4.4 KiB
Markdown
89 lines
4.4 KiB
Markdown
# Trezor Protocol
|
|
|
|
## version 1
|
|
|
|
Messages are sent in packets of 64 bytes.
|
|
|
|
First packet has the following structure:
|
|
|
|
| offset | length | type | contents |
|
|
|--------|--------|-------------|---------------------------------------------------------------------------------------|
|
|
| 0 | 3 | char[3] | '?##' magic constant |
|
|
| 3 | 2 | BE uint16_t | numerical [message type](messages.proto#L76) |
|
|
| 5 | 4 | BE uint32_t | message size |
|
|
| 9 | 55 | uint8_t[55] | first 55 bytes of message encoded in Protocol Buffers (padded with zeroes if shorter) |
|
|
|
|
Following packets has the following structure:
|
|
|
|
| offset | length | type | contents |
|
|
|--------|--------|-------------|----------------------------------------------------------------------------------------|
|
|
| 0 | 1 | char[1] | '?' magic constant |
|
|
| 1 | 63 | uint8_t[63] | following bytes of message encoded in Protocol Buffers (padded with zeroes if shorter) |
|
|
|
|
## Adding new message
|
|
|
|
To add new message to Trezor protocol follow these steps:
|
|
1. Reconsider if there isn't already a message, that would suit your needs.
|
|
2. Choose the right place (file) to put new message:
|
|
- [`messages.proto`](messages.proto) are for management of the messages itself (wire type to message type mapping and etc.)
|
|
- [`messages-common.proto`](messages-common.proto) are for common messages
|
|
- all other files have a suffix `messages-SUFFIX.proto`, where suffix describes specific use case of messages contained within the file
|
|
3. Add new message and comment it properly following our [Messages naming and documenting conventions](#messages-naming-and-documenting-conventions).
|
|
4. If message is not embedded in another message, it has to have a wire type number
|
|
assigned. This number is used to map between Trezor wire identifier (uint) and a
|
|
protobuf message. Mapping is defined in [`messages.proto`](messages.proto#L76).
|
|
|
|
Wire identifiers are organized in logical blocks with 100 numbers per block. If you are
|
|
extending an existing application (e.g., Ethereum, Monero, Webauthn, etc.), pick the
|
|
lowest free number in the block of your application. If you are adding a new
|
|
application, pick the lowest unused block and use zero in that block.
|
|
|
|
## Messages naming and documenting conventions
|
|
Message names must:
|
|
- be as self explanatory as possible
|
|
- have `Ack` suffix if the message is a received message (send from host to device) and serves as a response to some request made by device before
|
|
(e.g. initial messages from host to device doesn't have to have this suffix)
|
|
|
|
Documenting/commenting the messages is mandatory. Please use the following template:
|
|
```protobuf
|
|
/**
|
|
* MSG_TYPE: Description of the message
|
|
* MSG_FLOW_TAG
|
|
* MSG_FLOW_TAG
|
|
* ...
|
|
*/
|
|
```
|
|
where:
|
|
- `MSG_TYPE` is used to describe the purpose of the message and its type. Possible values are:
|
|
- `Request` for inbound messages (coming to the device (Trezor))
|
|
- `Response` for outbound messages (coming out from the device)
|
|
- in case that the message is embedded in another message we don't state the message type
|
|
- `MSG_FLOW_TAG` denotes the flow of the messages in a session (use case). Possible tags are:
|
|
- `@start` means that this message is first
|
|
- `@end` means that this message is last
|
|
- `@next` denotes messages that could follow after this message
|
|
- `@embed` denotes messages that are embedded into other message(s)
|
|
- `@auxstart` - denotes message for sub-flow start; this message might appear at any time
|
|
during any other flow. When the corresponding @auxend message is processed, the original
|
|
flow resumes.
|
|
- `@auxend` - see `@auxstart`
|
|
|
|
Messages flow is checked at the compile time.
|
|
|
|
Using the template and the rules we can create for example this messages:
|
|
```protobuf
|
|
/**
|
|
* Request: Ask device to sign transaction
|
|
* @start
|
|
* @next TxRequest
|
|
* @next Failure
|
|
*/
|
|
```
|
|
```protobuf
|
|
/**
|
|
* Structure representing BIP32 (hierarchical deterministic) node
|
|
* Used for imports of private key into the device and exporting public key out of device
|
|
* @embed
|
|
*/
|
|
```
|