Saleem Rashid
e3a0b6e7b4
setup: Switch to unprivileged execution
2018-02-13 19:31:36 +01:00
Pavol Rusnak
a00ac050e5
setup: typo changes in mpu setup
2018-02-13 16:16:31 +01:00
Pavol Rusnak
3cba075e4f
setup: revert string in fault_handler
2018-02-13 15:51:27 +01:00
Saleem Rashid
1f8f08d48a
setup: Enable MPU
...
Disable code execution from SRAM and reconfiguration of the MPU.
Prevents almost all code execution attacks.
2018-02-13 15:48:42 +01:00
Saleem Rashid
f0255661ed
setup: Change fault handler wording
2018-02-13 15:48:42 +01:00
Pavol Rusnak
6deb9fde32
setup: avoid usb host mode
2017-12-12 12:51:08 +01:00
Pavol Rusnak
18d8cb3c56
add project website (trezor.io) to license header
2017-11-05 17:47:23 +01:00
Jochen Hoenicke
98e617d874
startup: use custom reset_handler
...
+ group confidential data in one place
+ zero all SRAM where needed
2017-08-16 13:52:01 +02:00
Pavol Rusnak
c8ddd90409
setup: enable Clock Security System interrupt
2017-07-30 21:40:07 +02:00
Pavol Rusnak
0760ff0468
setup: move stack smashing protection code to setup.c
2017-07-30 21:40:07 +02:00
mruddy
1c55ec0fb3
fix hangs due to stale rng status ( #195 )
2017-07-19 11:54:26 +02:00
mruddy
c8c85424b6
fix usage of RNG before setup (#150/#151)
2017-02-17 13:19:05 +01:00
Jochen Hoenicke
5dae02bbbf
Faster SPI communication
...
According to specs, the display can handle up to 10 MHz SPI traffic
(minimum cycle time is 100 ns). This patch sets the SPI port to
7.5 MHz (60 MHz clock with divisor 8). In my tests the display works
even fine with SPI frequency at 60 MHz. I also minimized the delays
(the spec doesn't require a long setup time) and use the registers to
check when transfer is done instead of using a fixed delay.
This patch also changes the swipe function to swipe pixel by pixel.
Otherwise, the swipe would happen too fast to be seen.
This changes the display update time from 11 ms to 1.5 ms.
2016-08-26 18:43:16 +02:00
Pavol Rusnak
6e3aec0c1b
move submodules to vendor subdirectory
2015-12-15 23:01:54 +01:00
Pavol Rusnak
2707e8aff6
move APPVER guards from includes to app code
2014-07-07 15:03:34 +02:00
Pavol Rusnak
8ee9d50eb6
leave GPIO9 floating
2014-07-01 20:29:44 +02:00
Pavol Rusnak
ea42f6af4e
adapt to new opencm3 include structure
2014-06-19 00:12:31 +02:00
Pavol Rusnak
0d0a1ab5f2
import v1.0.0
2014-04-29 14:38:32 +02:00
