Roman Zeyde
b57c0ff430
Use trezor-crypto ECDH, adding Curve25519 support
2016-10-16 01:34:02 +02:00
Karel Bílek
dfc543c955
Switching address types ( #119 )
...
Address_type and address_type_p2sh were switched
2016-10-13 11:39:35 +02:00
Pavol Rusnak
7ddccdb7f4
Revert "simplify cryptoMessageVerify call"
...
This reverts commit 3a42032c63
2016-10-10 17:42:42 +02:00
Pavol Rusnak
c0181b1aec
extract address related stuff into trezor-crypto
2016-10-10 11:26:52 +02:00
Pavol Rusnak
e70900d49e
don't tie message verification with P2PKH addresses
2016-10-10 10:17:51 +02:00
Pavol Rusnak
3a42032c63
simplify cryptoMessageVerify call
2016-10-10 00:18:57 +02:00
Daira Hopwood
6bfe487f19
Update address prefixes for Zcash.
2016-10-10 00:05:51 +02:00
Daira Hopwood
69d99d202d
Add support for multi-byte address prefixes.
2016-10-10 00:05:45 +02:00
Pavol Rusnak
1234ab94d4
update trezor-crypto
2016-10-06 17:01:17 +02:00
Jochen Hoenicke
a0ade6343e
Reworked rfc6979 signing. ( #116 )
...
New parameter is_canonical that allows for generating signatures that
have additional requirements.
2016-10-06 16:58:05 +02:00
Pavol Rusnak
d7ff70caf6
add checking of buttons to bootloader
2016-10-06 15:03:11 +02:00
Jochen Hoenicke
d767e52055
Confirm to change U2F counter ( #114 )
2016-09-27 23:33:28 +02:00
Pavol Rusnak
9fe9ebc990
fix usb descriptor in bootloader
2016-09-26 14:57:10 +02:00
Pavol Rusnak
2f7ed2aa0f
implement firmware_present flag in bootloader
2016-09-26 13:09:18 +02:00
Pavol Rusnak
cda9ae4b29
change version description in bootloader
2016-09-25 16:36:44 +02:00
Pavol Rusnak
dc8348b4a0
add flash target to bootloader makefile
2016-09-25 16:04:07 +02:00
Pavol Rusnak
259eeae26e
don't halt on broken firmware but stay in bootloader mode
2016-09-25 15:52:39 +02:00
bitcartel
e0e190b3dc
Update coins.c for Zcash mainnet ( #111 )
2016-08-31 14:02:53 +02:00
Pavol Rusnak
8d7c1ec543
Merge pull request #110 from jhoenicke/master
...
More alignment fixes
2016-08-30 12:55:37 +02:00
Jochen Hoenicke
6d65551b82
More alignment fixes
2016-08-30 12:39:37 +02:00
Pavol Rusnak
dec9484a17
update version
2016-08-30 10:33:13 +02:00
Pavol Rusnak
fd79570aaf
fix unaligned access in serialno; update trezor-crypto
2016-08-29 22:37:27 +02:00
Pavol Rusnak
d7c0fbc379
add const where possible (for message parsing)
2016-08-29 22:36:18 +02:00
Pavol Rusnak
aaf2631dd6
sign firmware inside docker container
2016-08-29 19:20:50 +02:00
Pavol Rusnak
0a55a9e415
update to nanopb 0.2.9.3
2016-08-29 12:59:29 +02:00
Pavol Rusnak
fff16e813a
add link to protobuf definition in coins.c
2016-08-29 10:44:40 +02:00
Pavol Rusnak
6f342816e1
Merge pull request #108 from jhoenicke/fastspi
...
Faster SPI communication
2016-08-29 10:39:09 +02:00
Jochen Hoenicke
5dae02bbbf
Faster SPI communication
...
According to specs, the display can handle up to 10 MHz SPI traffic
(minimum cycle time is 100 ns). This patch sets the SPI port to
7.5 MHz (60 MHz clock with divisor 8). In my tests the display works
even fine with SPI frequency at 60 MHz. I also minimized the delays
(the spec doesn't require a long setup time) and use the registers to
check when transfer is done instead of using a fixed delay.
This patch also changes the swipe function to swipe pixel by pixel.
Otherwise, the swipe would happen too fast to be seen.
This changes the display update time from 11 ms to 1.5 ms.
2016-08-26 18:43:16 +02:00
Pavol Rusnak
4c379e36ec
Merge pull request #103 from axic/ethereum
...
Implement Ethereum support
2016-08-26 11:01:45 +02:00
Jochen Hoenicke
bc55013942
Simplified one-byte encodings
2016-08-25 13:02:14 +02:00
Jochen Hoenicke
91dcead35e
Gas estimate screen, tweaked display of value
2016-08-23 22:05:24 +02:00
Jochen Hoenicke
a37a2e3612
Confirm data, streamlining code
...
Set all size fields to 0, if fields was not given to avoid the conditions
later.
Display data and ask for confirmation.
2016-08-22 23:18:38 +02:00
Jochen Hoenicke
05a73593f6
No special case encoding for '\x0', cleanups
...
The encoding for data '\x00' was tested here:
http://testnet.etherscan.io/tx/0x05d6f97de3ecd33ad4059fa9bd342a10ef99d580a2d881b0c5a0c9e8c55ff975
2016-08-19 23:35:11 +02:00
Jochen Hoenicke
22d0e7a053
Incorporated changes for updated master
2016-08-19 03:16:59 +01:00
Pavol Rusnak
efd443abe8
implement ethereum signing check
2016-08-19 03:14:38 +01:00
Pavol Rusnak
4e0a69b6ea
refactor ethereum methods, show progress properly
2016-08-19 03:14:38 +01:00
Pavol Rusnak
1558d77ea0
split rlp_encode_length into rlp_encode_length and rlp_encode_list_length
2016-08-19 03:14:38 +01:00
Pavol Rusnak
3db323c599
fix printing of ethereum value and address
2016-08-19 03:14:38 +01:00
Pavol Rusnak
3d1ab24d92
simplify ethereum code, EthereumSignTx.data_length is the total length now
2016-08-19 03:14:38 +01:00
Pavol Rusnak
48008ddd8e
implement layoutEthereumConfirmTx
2016-08-19 03:14:38 +01:00
Pavol Rusnak
7d9a56e678
fix curly braces in if statements
2016-08-19 03:14:38 +01:00
Nick Johnson
4a195ebd86
Don't include 0x in address display, so everything fits
2016-08-19 03:14:38 +01:00
Alex Beregszaszi
7432805b6a
Fix special RLP case for length=1 firstbyte=0
2016-08-19 03:14:38 +01:00
Alex Beregszaszi
079d282541
Simplify send_request_chunk()
2016-08-19 03:14:38 +01:00
Alex Beregszaszi
78b1370de9
More input sanity checks in EthereumSignTx
2016-08-19 03:14:38 +01:00
Alex Beregszaszi
a617200c9c
Add confirmation dialog to EthereumSignTx
2016-08-19 03:14:38 +01:00
Alex Beregszaszi
e0a1743003
Add sanity checks for data fields in EthereumSignTx
2016-08-19 03:14:38 +01:00
Alex Beregszaszi
ab49a7cb45
Calculate data length based on the initial chunk and the supplied length
2016-08-19 03:14:38 +01:00
Alex Beregszaszi
e0395b13eb
Fix RLP length calculation
2016-08-19 03:14:38 +01:00
Alex Beregszaszi
2b6c991179
Split out send_signature and support short requests
2016-08-19 03:14:38 +01:00
