refactor(core): decompose lowlevel module

[no changelog]

core/embed/boardloader/main.c

@@ -33,6 +33,8 @@
 #include "model.h"
 #include "mpu.h"
 #include "platform.h"
+#include "pvd.h"
+#include "reset_flags.h"
 #include "rng.h"
 #include "rsod.h"
 #include "secret.h"
@@ -57,9 +59,9 @@
 #endif
 #endif
 
-#include "lowlevel.h"
 #include "model.h"
 #include "monoctr.h"
+#include "option_bytes.h"
 #include "version.h"
 
 #include "memzero.h"
@@ -240,9 +242,9 @@ int main(void) {
 
   reset_flags_reset();
 
-  // need the systick timer running before many HAL operations.
+#ifdef USE_PVD
-  // want the PVD enabled before flash operations too.
+  pvd_init();
-  periph_init();
+#endif
 
   if (sectrue != flash_configure_option_bytes()) {
     // display is not initialized so don't call ensure

core/embed/bootloader/main.c

@@ -29,8 +29,9 @@
 #include "flash_otp.h"
 #include "flash_utils.h"
 #include "image.h"
-#include "lowlevel.h"
 #include "messages.pb.h"
+#include "option_bytes.h"
+#include "pvd.h"
 #include "random_delays.h"
 #include "rsod.h"
 #include "secbool.h"
@@ -364,6 +365,10 @@ int bootloader_main(void) {
 
   random_delays_init();
 
+#ifdef USE_PVD
+  pvd_init();
+#endif
+
 #ifdef USE_HASH_PROCESSOR
   hash_processor_init();
 #endif

core/embed/kernel/main.c

@@ -38,6 +38,7 @@
 #include "optiga_commands.h"
 #include "optiga_transport.h"
 #include "platform.h"
+#include "pvd.h"
 #include "random_delays.h"
 #include "rsod.h"
 #include "sdcard.h"
@@ -76,6 +77,10 @@ void drivers_init() {
 
   random_delays_init();
 
+#ifdef USE_PVD
+  pvd_init();
+#endif
+
 #ifdef RDI
   random_delays_start_rdi();
 #endif

core/embed/models/D001/boards/stm32f429i-disc1.h

@@ -12,6 +12,7 @@
 #define USE_TOUCH 1
 #define USE_SDRAM 1
 #define USE_RGB_COLORS 1
+#define USE_PVD 1
 
 #define I2C_COUNT 1
 #define I2C_INSTANCE_0 I2C3

core/embed/models/T2B1/boards/trezor_r_v10.h

@@ -7,6 +7,7 @@
 #define USE_SBU 1
 #define USE_I2C 1
 #define USE_CONSUMPTION_MASK 1
+#define USE_PVD 1
 
 #define DISPLAY_RESX 128
 #define DISPLAY_RESY 64

core/embed/models/T2B1/boards/trezor_r_v3.h

@@ -5,6 +5,7 @@
 
 #define USE_BUTTON 1
 #define USE_SBU 1
+#define USE_PVD 1
 
 #define DISPLAY_RESX 128
 #define DISPLAY_RESY 128

core/embed/models/T2B1/boards/trezor_r_v4.h

@@ -5,6 +5,7 @@
 
 #define USE_BUTTON 1
 #define USE_SBU 1
+#define USE_PVD 1
 
 #define DISPLAY_RESX 128
 #define DISPLAY_RESY 64

core/embed/models/T2B1/boards/trezor_r_v6.h

@@ -5,6 +5,7 @@
 
 #define USE_BUTTON 1
 #define USE_SBU 1
+#define USE_PVD 1
 
 #define DISPLAY_RESX 128
 #define DISPLAY_RESY 64

core/embed/models/T2T1/boards/trezor_t.h

@@ -10,6 +10,7 @@
 #define USE_RGB_COLORS 1
 #define USE_BACKLIGHT 1
 #define USE_DISP_I8080_8BIT_DW 1
+#define USE_PVD 1
 
 #define DISPLAY_RESX 240
 #define DISPLAY_RESY 240

core/embed/models/T3B1/boards/trezor_t3b1_revB.h

@@ -11,6 +11,7 @@
 #define USE_SBU 1
 #define USE_HASH_PROCESSOR 1
 #define USE_CONSUMPTION_MASK 1
+#define USE_PVD 1
 
 #define DISPLAY_LEGACY_HEADER "displays/vg-2864ksweg01.h"
 

core/embed/models/T3T1/boards/trezor_t3t1_revE.h

@@ -12,6 +12,7 @@
 #define USE_HAPTIC 1
 #define USE_BACKLIGHT 1
 #define USE_HASH_PROCESSOR 1
+#define USE_PVD 1
 
 #define DISPLAY_RESX 240
 #define DISPLAY_RESY 240

core/embed/models/T3T1/boards/trezor_t3t1_v4.h

@@ -13,6 +13,7 @@
 #define USE_HAPTIC 1
 #define USE_BACKLIGHT 1
 #define USE_HASH_PROCESSOR 1
+#define USE_PVD 1
 
 #define DISPLAY_RESX 240
 #define DISPLAY_RESY 240

core/embed/trezorhal/option_bytes.h

@@ -17,8 +17,8 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#ifndef __TREZORHAL_LOWLEVEL_H__
+#ifndef TREZORHAL_OPTION_BYTES_H
-#define __TREZORHAL_LOWLEVEL_H__
+#define TREZORHAL_OPTION_BYTES_H
 
 #include "secbool.h"
 
@@ -29,10 +29,7 @@ void flash_lock_option_bytes(void);
 void flash_unlock_option_bytes(void);
 uint32_t flash_set_option_bytes(void);
 secbool flash_configure_option_bytes(void);
-void periph_init(void);
-secbool reset_flags_check(void);
-void reset_flags_reset(void);
 
 #endif  // KERNEL_MODE
 
-#endif  // __TREZORHAL_LOWLEVEL_H__
+#endif  // TREZORHAL_OPTION_BYTES_H

core/embed/trezorhal/pvd.h

@@ -0,0 +1,33 @@
+/*
+ * This file is part of the Trezor project, https://trezor.io/
+ *
+ * Copyright (c) SatoshiLabs
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef TREZORHAL_PVD_H
+#define TREZORHAL_PVD_H
+
+#ifdef KERNEL_MODE
+
+// Initialize the Programmable Voltage Detector (PVD) peripheral.
+//
+// The PVD is used to detect a voltage drop below a certain threshold
+// and trigger an interrupt. This is used to safely shutdown the device.
+void pvd_init(void);
+
+#endif  // KERNEL_MODE
+
+#endif  // TREZORHAL_PVD_H

core/embed/trezorhal/reset_flags.h

@@ -0,0 +1,35 @@
+/*
+ * This file is part of the Trezor project, https://trezor.io/
+ *
+ * Copyright (c) SatoshiLabs
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef TREZORHAL_RESET_FLAGS_H
+#define TREZORHAL_RESET_FLAGS_H
+
+#include "secbool.h"
+
+#ifdef KERNEL_MODE
+
+// Checks if the CPU reset flags indicate an expected type of reset.
+secbool reset_flags_check(void);
+
+// Clear the CPU register that holds the reset flags.
+void reset_flags_reset(void);
+
+#endif  // KERNEL_MODE
+
+#endif  // TREZORHAL_RESET_FLAGS_H

core/embed/trezorhal/stm32f4/option_bytes.c

@@ -19,11 +19,9 @@
 
 #include STM32_HAL_H
 
-#include "lowlevel.h"
+#include "option_bytes.h"
-
-#include <mpu.h>
-
 #include "flash_otp.h"
+#include "mpu.h"
 
 #ifdef KERNEL_MODE
 
@@ -154,50 +152,4 @@ secbool flash_configure_option_bytes(void) {
   return secfalse;  // notify that we DID have to change the option bytes
 }
 
-void periph_init(void) {
-  // STM32F4xx HAL library initialization:
-  //  - configure the Flash prefetch, instruction and data caches
-  //  - configure the Systick to generate an interrupt each 1 msec
-  //  - set NVIC Group Priority to 4
-  //  - global MSP (MCU Support Package) initialization
-  HAL_Init();
-
-  // Enable GPIO clocks
-  __HAL_RCC_GPIOA_CLK_ENABLE();
-  __HAL_RCC_GPIOB_CLK_ENABLE();
-  __HAL_RCC_GPIOC_CLK_ENABLE();
-  __HAL_RCC_GPIOD_CLK_ENABLE();
-
-  // enable the PVD (programmable voltage detector).
-  // select the "2.7V" threshold (level 5).
-  // this detector will be active regardless of the
-  // flash option byte BOR setting.
-  __HAL_RCC_PWR_CLK_ENABLE();
-  PWR_PVDTypeDef pvd_config = {0};
-  pvd_config.PVDLevel = PWR_PVDLEVEL_5;
-  pvd_config.Mode = PWR_PVD_MODE_IT_RISING_FALLING;
-  HAL_PWR_ConfigPVD(&pvd_config);
-  HAL_PWR_EnablePVD();
-  NVIC_EnableIRQ(PVD_IRQn);
-}
-
-secbool reset_flags_check(void) {
-#if PRODUCTION
-  // this is effective enough that it makes development painful, so only use it
-  // for production. check the reset flags to assure that we arrive here due to
-  // a regular full power-on event, and not as a result of a lesser reset.
-  if ((RCC->CSR & (RCC_CSR_LPWRRSTF | RCC_CSR_WWDGRSTF | RCC_CSR_IWDGRSTF |
-                   RCC_CSR_SFTRSTF | RCC_CSR_PORRSTF | RCC_CSR_PINRSTF |
-                   RCC_CSR_BORRSTF)) !=
-      (RCC_CSR_PORRSTF | RCC_CSR_PINRSTF | RCC_CSR_BORRSTF)) {
-    return secfalse;
-  }
-#endif
-  return sectrue;
-}
-
-void reset_flags_reset(void) {
-  RCC->CSR |= RCC_CSR_RMVF;  // clear the reset flags
-}
-
 #endif  // #ifdef KERNEL_MODE

core/embed/trezorhal/stm32f4/pvd.c

@@ -0,0 +1,64 @@
+/*
+ * This file is part of the Trezor project, https://trezor.io/
+ *
+ * Copyright (c) SatoshiLabs
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include TREZOR_BOARD
+#include STM32_HAL_H
+
+#include "bootutils.h"
+#include "irq.h"
+#include "mpu.h"
+
+#if defined(KERNEL_MODE) && defined(USE_PVD)
+
+void pvd_init(void) {
+  // enable the PVD (programmable voltage detector).
+  // select the "2.8V" threshold (level 5).
+  // this detector will be active regardless of the
+  // flash option byte BOR setting.
+  __HAL_RCC_PWR_CLK_ENABLE();
+  PWR_PVDTypeDef pvd_config = {0};
+  pvd_config.PVDLevel = PWR_PVDLEVEL_5;
+  pvd_config.Mode = PWR_PVD_MODE_IT_RISING_FALLING;
+  HAL_PWR_ConfigPVD(&pvd_config);
+  HAL_PWR_EnablePVD();
+#ifdef STM32U5
+  NVIC_SetPriority(PVD_PVM_IRQn, IRQ_PRI_HIGHEST);
+  NVIC_EnableIRQ(PVD_PVM_IRQn);
+#else
+  NVIC_SetPriority(PVD_IRQn, IRQ_PRI_HIGHEST);
+  NVIC_EnableIRQ(PVD_IRQn);
+#endif
+}
+
+#ifdef STM32U5
+void PVD_PVM_IRQHandler(void) {
+#else
+void PVD_IRQHandler(void) {
+#endif
+  mpu_reconfig(MPU_MODE_DEFAULT);
+#ifdef BACKLIGHT_PWM_TIM
+  // Turn off display backlight
+  BACKLIGHT_PWM_TIM->BACKLIGHT_PWM_TIM_CCR = 0;
+#endif
+  // from util.s
+  extern void shutdown_privileged(void);
+  shutdown_privileged();
+}
+
+#endif  // defined(KERNEL_MODE) && defined(USE_PVD)

core/embed/trezorhal/stm32f4/reset_flags.c

@@ -0,0 +1,44 @@
+/*
+ * This file is part of the Trezor project, https://trezor.io/
+ *
+ * Copyright (c) SatoshiLabs
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include STM32_HAL_H
+
+#include "reset_flags.h"
+
+#ifdef KERNEL_MODE
+
+secbool reset_flags_check(void) {
+#if PRODUCTION
+  // this is effective enough that it makes development painful, so only use it
+  // for production. check the reset flags to assure that we arrive here due to
+  // a regular full power-on event, and not as a result of a lesser reset.
+  if ((RCC->CSR & (RCC_CSR_LPWRRSTF | RCC_CSR_WWDGRSTF | RCC_CSR_IWDGRSTF |
+                   RCC_CSR_SFTRSTF | RCC_CSR_PINRSTF | RCC_CSR_BORRSTF |
+                   RCC_CSR_OBLRSTF)) != (RCC_CSR_PINRSTF | RCC_CSR_BORRSTF)) {
+    return secfalse;
+  }
+#endif
+  return sectrue;
+}
+
+void reset_flags_reset(void) {
+  RCC->CSR |= RCC_CSR_RMVF;  // clear the reset flags
+}
+
+#endif

core/embed/trezorhal/stm32f4/startup_init.c

@@ -159,6 +159,24 @@ void SystemInit(void) {
   // set CP10 and CP11 to enable full access to the fpu coprocessor; ARMv7-M
   // Architecture Reference Manual section B3.2.20
   SCB->CPACR |= ((3U << 22) | (3U << 20));
+
+  // Configure Flash prefetch, Instruction cache, Data cache
+#if (INSTRUCTION_CACHE_ENABLE != 0U)
+  __HAL_FLASH_INSTRUCTION_CACHE_ENABLE();
+#endif
+
+#if (PREFETCH_ENABLE != 0U)
+  __HAL_FLASH_PREFETCH_BUFFER_ENABLE();
+#endif
+
+  // Set Interrupt Group Priority
+  HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4);
+
+  // Enable GPIO clocks
+  __HAL_RCC_GPIOA_CLK_ENABLE();
+  __HAL_RCC_GPIOB_CLK_ENABLE();
+  __HAL_RCC_GPIOC_CLK_ENABLE();
+  __HAL_RCC_GPIOD_CLK_ENABLE();
 }
 
 #ifdef TREZOR_MODEL_T

core/embed/trezorhal/stm32f4/systask.c

@@ -634,16 +634,4 @@ void NMI_Handler(void) {
   mpu_restore(mpu_mode);
 }
 
-// from util.s
-extern void shutdown_privileged(void);
-
-void PVD_PVM_IRQHandler(void) {
-  mpu_reconfig(MPU_MODE_DEFAULT);
-#ifdef BACKLIGHT_PWM_TIM
-  // Turn off display backlight
-  BACKLIGHT_PWM_TIM->BACKLIGHT_PWM_TIM_CCR = 0;
-#endif
-  shutdown_privileged();
-}
-
 #endif  // KERNEL_MODE

core/embed/trezorhal/stm32u5/option_bytes.c

@@ -21,7 +21,7 @@
 
 #ifdef KERNEL_MODE
 
-#include "lowlevel.h"
+#include "option_bytes.h"
 #include "common.h"
 #include "flash.h"
 #include "model.h"
@@ -41,7 +41,6 @@
 #ifdef VDD_3V3
 // BOR LEVEL 0: Reset level threshold is around 2.8 V
 #define WANT_BOR_LEVEL (OB_BOR_LEVEL_4)
-#define USE_PVD 1
 #elif VDD_1V8
 // BOR LEVEL 0: Reset level threshold is around 1.7 V
 #define WANT_BOR_LEVEL (OB_BOR_LEVEL_0)
@@ -266,51 +265,4 @@ secbool flash_configure_option_bytes(void) {
   return secfalse;  // notify that we DID have to change the option bytes
 }
 
-void periph_init(void) {
-  // STM32U5xx HAL library initialization:
-  //  - configure the Flash prefetch, instruction and data caches
-  //  - configure the Systick to generate an interrupt each 1 msec
-  //  - set NVIC Group Priority to 4
-  //  - global MSP (MCU Support Package) initialization
-  HAL_Init();
-
-  // Enable GPIO clocks
-  __HAL_RCC_GPIOA_CLK_ENABLE();
-  __HAL_RCC_GPIOB_CLK_ENABLE();
-  __HAL_RCC_GPIOC_CLK_ENABLE();
-  __HAL_RCC_GPIOD_CLK_ENABLE();
-
-#ifdef USE_PVD
-  // enable the PVD (programmable voltage detector).
-  // select the "2.8V" threshold (level 5).
-  // this detector will be active regardless of the
-  // flash option byte BOR setting.
-  __HAL_RCC_PWR_CLK_ENABLE();
-  PWR_PVDTypeDef pvd_config = {0};
-  pvd_config.PVDLevel = PWR_PVDLEVEL_5;
-  pvd_config.Mode = PWR_PVD_MODE_IT_RISING_FALLING;
-  HAL_PWR_ConfigPVD(&pvd_config);
-  HAL_PWR_EnablePVD();
-  NVIC_EnableIRQ(PVD_PVM_IRQn);
-#endif
-}
-
-secbool reset_flags_check(void) {
-#if PRODUCTION
-  // this is effective enough that it makes development painful, so only use it
-  // for production. check the reset flags to assure that we arrive here due to
-  // a regular full power-on event, and not as a result of a lesser reset.
-  if ((RCC->CSR & (RCC_CSR_LPWRRSTF | RCC_CSR_WWDGRSTF | RCC_CSR_IWDGRSTF |
-                   RCC_CSR_SFTRSTF | RCC_CSR_PINRSTF | RCC_CSR_BORRSTF |
-                   RCC_CSR_OBLRSTF)) != (RCC_CSR_PINRSTF | RCC_CSR_BORRSTF)) {
-    return secfalse;
-  }
-#endif
-  return sectrue;
-}
-
-void reset_flags_reset(void) {
-  RCC->CSR |= RCC_CSR_RMVF;  // clear the reset flags
-}
-
 #endif  // #ifdef KERNEL_MODE

core/embed/trezorhal/stm32u5/pvd.c

@@ -0,0 +1 @@
+../stm32f4/pvd.c

core/embed/trezorhal/stm32u5/reset_flags.c

@@ -0,0 +1,45 @@
+/*
+ * This file is part of the Trezor project, https://trezor.io/
+ *
+ * Copyright (c) SatoshiLabs
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include STM32_HAL_H
+
+#include "reset_flags.h"
+
+#ifdef KERNEL_MODE
+
+secbool reset_flags_check(void) {
+#if PRODUCTION
+  // this is effective enough that it makes development painful, so only use it
+  // for production. check the reset flags to assure that we arrive here due to
+  // a regular full power-on event, and not as a result of a lesser reset.
+  if ((RCC->CSR & (RCC_CSR_LPWRRSTF | RCC_CSR_WWDGRSTF | RCC_CSR_IWDGRSTF |
+                   RCC_CSR_SFTRSTF | RCC_CSR_PORRSTF | RCC_CSR_PINRSTF |
+                   RCC_CSR_BORRSTF)) !=
+      (RCC_CSR_PORRSTF | RCC_CSR_PINRSTF | RCC_CSR_BORRSTF)) {
+    return secfalse;
+  }
+#endif
+  return sectrue;
+}
+
+void reset_flags_reset(void) {
+  RCC->CSR |= RCC_CSR_RMVF;  // clear the reset flags
+}
+
+#endif

core/embed/trezorhal/stm32u5/startup_init.c

@@ -214,6 +214,24 @@ void SystemInit(void) {
 
   // enable instruction cache in default 2-way mode
   ICACHE->CR = ICACHE_CR_EN;
+
+  /* Configure Flash prefetch */
+#if (PREFETCH_ENABLE != 0U)
+  __HAL_FLASH_PREFETCH_BUFFER_ENABLE();
+#endif /* PREFETCH_ENABLE */
+
+  /* Set Interrupt Group Priority */
+  HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4);
+
+  /* Update the SystemCoreClock global variable */
+  /// SystemCoreClock = HAL_RCC_GetSysClockFreq() >> AHBPrescTable[(RCC->CFGR2 &
+  /// RCC_CFGR2_HPRE) >> RCC_CFGR2_HPRE_Pos];
+
+  // Enable GPIO clocks
+  __HAL_RCC_GPIOA_CLK_ENABLE();
+  __HAL_RCC_GPIOB_CLK_ENABLE();
+  __HAL_RCC_GPIOC_CLK_ENABLE();
+  __HAL_RCC_GPIOD_CLK_ENABLE();
 }
 
 #endif  // #ifdef KERNEL_MODE

core/site_scons/models/stm32f4_common.py

@@ -48,10 +48,12 @@ def stm32f4_common_files(env, defines, sources, paths):
         "embed/trezorhal/stm32f4/flash_otp.c",
         "embed/trezorhal/stm32f4/fwutils.c",
         "embed/trezorhal/stm32f4/layout.c",
-        "embed/trezorhal/stm32f4/lowlevel.c",
         "embed/trezorhal/stm32f4/monoctr.c",
         "embed/trezorhal/stm32f4/mpu.c",
+        "embed/trezorhal/stm32f4/option_bytes.c",
+        "embed/trezorhal/stm32f4/pvd.c",
         "embed/trezorhal/stm32f4/random_delays.c",
+        "embed/trezorhal/stm32f4/reset_flags.c",
         "embed/trezorhal/stm32f4/rng.c",
         "embed/trezorhal/stm32f4/secret.c",
         "embed/trezorhal/stm32f4/startup_init.c",

core/site_scons/models/stm32u5_common.py

@@ -57,11 +57,13 @@ def stm32u5_common_files(env, defines, sources, paths):
         "embed/trezorhal/stm32u5/flash_otp.c",
         "embed/trezorhal/stm32u5/fwutils.c",
         "embed/trezorhal/stm32u5/layout.c",
-        "embed/trezorhal/stm32u5/lowlevel.c",
         "embed/trezorhal/stm32u5/hash_processor.c",
         "embed/trezorhal/stm32u5/monoctr.c",
         "embed/trezorhal/stm32u5/mpu.c",
+        "embed/trezorhal/stm32u5/option_bytes.c",
+        "embed/trezorhal/stm32u5/pvd.c",
         "embed/trezorhal/stm32u5/random_delays.c",
+        "embed/trezorhal/stm32u5/reset_flags.c",
         "embed/trezorhal/stm32u5/rng.c",
         "embed/trezorhal/stm32u5/secret.c",
         "embed/trezorhal/stm32u5/secure_aes.c",