arno/trezor-firmware
1
0
Fork 0
mirror of https://github.com/trezor/trezor-firmware.git synced 2024-11-30 03:18:20 +00:00
Code Issues Releases Wiki Activity
f07b4dda0b
trezor-firmware/Makefile
Jan Pochyla f093ca23d5 tests: ignore specific tests, testpy -> test_emu
2017-10-30 18:52:10 +01:00

201 lines
7.3 KiB
Makefile
Raw Blame History

.PHONY: vendor
JOBS = 4
MAKE = make -j $(JOBS)
SCONS = scons -Q -j $(JOBS)
BOARDLOADER_BUILD_DIR = build/boardloader
BOOTLOADER_BUILD_DIR = build/bootloader
PRODTEST_BUILD_DIR = build/prodtest
FIRMWARE_BUILD_DIR = build/firmware
UNAME_S := $(shell uname -s)
ifeq ($(UNAME_S),Darwin)
UNIX_PORT_OPTS ?= TREZOR_X86=0
else
UNIX_PORT_OPTS ?= TREZOR_X86=1
endif
CROSS_PORT_OPTS ?= MICROPY_FORCE_32BIT=1
ifeq ($(DISPLAY_ILI9341V), 1)
CFLAGS += -DDISPLAY_ILI9341V=1
CFLAGS += -DDISPLAY_ST7789V=0
endif
PRODUCTION ?= 0
STLINK_VER ?= v2
OPENOCD = openocd -f interface/stlink-$(STLINK_VER).cfg -c "transport select hla_swd" -f target/stm32f4x.cfg
BOARDLOADER_START = 0x08000000
BOOTLOADER_START = 0x08020000
FIRMWARE_START = 0x08040000
PRODTEST_START = 0x08040000
BOARDLOADER_MAXSIZE = 49152
BOOTLOADER_MAXSIZE = 131072
FIRMWARE_MAXSIZE = 786432
GITREV=$(shell git describe --always --dirty)
CFLAGS += -DGITREV=$(GITREV)
## help commands:
help: ## show this help
@awk 'BEGIN {FS = ":.*?## "} /^[a-zA-Z0-9_-]+:.*?## / {printf "\033[36m make %-20s\033[0m %s\n", $$1, $$2} /^##(.*)/ {printf "\033[33m%s\n", substr($$0, 4)}' $(MAKEFILE_LIST)
## dependencies commands:
vendor: ## update git submodules
git submodule update --init --recursive --force
res: ## update resources
./tools/res_collect
## emulator commands:
run: ## run unix port
cd src ; ../build/unix/micropython
emu: ## run emulator
./emu.sh
## test commands:
test: ## run unit tests
cd tests ; ./run_tests.sh
test_emu: ## run selected device tests from python-trezor
cd tests ; ./run_tests_device_emu.sh
pylint: ## run pylint on application sources
pylint -E $(shell find src -name *.py)
style: ## run code style check on application sources
flake8 $(shell find src -name *.py)
## build commands:
build: build_boardloader build_bootloader build_prodtest build_firmware build_unix build_cross ## build all
build_boardloader: ## build boardloader
$(SCONS) CFLAGS="$(CFLAGS)" PRODUCTION="$(PRODUCTION)" build/boardloader/boardloader.bin
build_bootloader: ## build bootloader
$(SCONS) CFLAGS="$(CFLAGS)" PRODUCTION="$(PRODUCTION)" build/bootloader/bootloader.bin
build_prodtest: ## build production test firmware
$(SCONS) CFLAGS="$(CFLAGS)" build/prodtest/prodtest.bin
build_firmware: res build_cross ## build firmware with frozen modules
$(SCONS) CFLAGS="$(CFLAGS)" build/firmware/firmware.bin
build_unix: ## build unix port
$(SCONS) CFLAGS="$(CFLAGS)" build/unix/micropython $(UNIX_PORT_OPTS)
build_unix_noui: ## build unix port without UI support
$(SCONS) CFLAGS="$(CFLAGS)" build/unix/micropython $(UNIX_PORT_OPTS) TREZOR_NOUI=1
build_cross: ## build mpy-cross port
$(MAKE) -C vendor/micropython/mpy-cross $(CROSS_PORT_OPTS)
## clean commands:
clean: clean_boardloader clean_bootloader clean_prodtest clean_firmware clean_unix clean_cross ## clean all
clean_boardloader: ## clean boardloader build
rm -rf build/boardloader
clean_bootloader: ## clean bootloader build
rm -rf build/bootloader
clean_prodtest: ## clean prodtest build
rm -rf build/prodtest
clean_firmware: ## clean firmware build
rm -rf build/firmware
clean_unix: ## clean unix build
rm -rf build/unix
clean_cross: ## clean mpy-cross build
$(MAKE) -C vendor/micropython/mpy-cross clean $(CROSS_PORT_OPTS)
## flash commands:
flash: flash_boardloader flash_bootloader flash_firmware ## flash everything using OpenOCD
flash_boardloader: $(BOARDLOADER_BUILD_DIR)/boardloader.bin ## flash boardloader using OpenOCD
$(OPENOCD) -c "init; reset halt; flash write_image erase $< $(BOARDLOADER_START); exit"
flash_bootloader: $(BOOTLOADER_BUILD_DIR)/bootloader.bin ## flash bootloader using OpenOCD
$(OPENOCD) -c "init; reset halt; flash write_image erase $< $(BOOTLOADER_START); exit"
flash_prodtest: $(PRODTEST_BUILD_DIR)/prodtest.bin ## flash prodtest using OpenOCD
$(OPENOCD) -c "init; reset halt; flash write_image erase $< $(FIRMWARE_START); exit"
flash_firmware: $(FIRMWARE_BUILD_DIR)/firmware.bin ## flash firmware using OpenOCD
$(OPENOCD) -c "init; reset halt; flash write_image erase $< $(FIRMWARE_START); exit"
flash_combine: $(PRODTEST_BUILD_DIR)/combined.bin ## flash combined using OpenOCD
$(OPENOCD) -c "init; reset halt; flash write_image erase $< $(BOARDLOADER_START); exit"
flash_erase: ## erase all sectors in flash bank 0
$(OPENOCD) -c "init; reset halt; flash info 0; flash erase_sector 0 0 last; flash erase_check 0; exit"
## openocd debug commands:
openocd: ## start openocd which connects to the device
$(OPENOCD)
GDB = arm-none-eabi-gdb --nx -ex 'set remotetimeout unlimited' -ex 'set confirm off' -ex 'target remote 127.0.0.1:3333' -ex 'monitor reset halt'
gdb_boardloader: $(BOARDLOADER_BUILD_DIR)/boardloader.elf ## start remote gdb session to openocd with boardloader symbols
$(GDB) $<
gdb_bootloader: $(BOOTLOADER_BUILD_DIR)/bootloader.elf ## start remote gdb session to openocd with bootloader symbols
$(GDB) $<
gdb_prodtest: $(PRODTEST_BUILD_DIR)/prodtest.elf ## start remote gdb session to openocd with prodtest symbols
$(GDB) $<
gdb_firmware: $(FIRMWARE_BUILD_DIR)/firmware.elf ## start remote gdb session to openocd with firmware symbols
$(GDB) $<
## misc commands:
vendorheader: ## construct and sign the default vendor header
./tools/build_vendorheader e28a8970753332bd72fef413e6b0b2ef1b4aadda7aa2c141f233712a6876b351:d4eec1869fb1b8a4e817516ad5a931557cb56805c3eb16e8f3a803d647df7869:772c8a442b7db06e166cfbc1ccbcbcde6f3eba76a4e98ef3ffc519502237d6ef 2 0.0 50 DEVELOPMENT assets/vendor_devel.toif embed/firmware/vendorheader.bin
./tools/binctl embed/firmware/vendorheader.bin -s 1:2 `./tools/combine_sign vendorheader embed/firmware/vendorheader.bin 4444444444444444444444444444444444444444444444444444444444444444 4545454545454545454545454545454545454545454545454545454545454545`
vendorheader_sl: ## construct SatoshiLabs vendor header
./tools/build_vendorheader 47fbdc84d8abef44fe6abde8f87b6ead821b7082ec63b9f7cc33dc53bf6c708d:03fdd9a9c3911652d5effca4540d96ed92d85850a47d256ab0a2d728c0d1a298:2218c25f8ba70c82eba8ed6a321df209c0a7643d014f33bf9317846f62923830 2 0.0 80 SatoshiLabs assets/vendor_satoshilabs.toif embed/firmware/vendorheader_sl.bin
binctl: ## print info about binary files
./tools/binctl $(BOOTLOADER_BUILD_DIR)/bootloader.bin
./tools/binctl embed/firmware/vendorheader.bin
./tools/binctl $(PRODTEST_BUILD_DIR)/prodtest.bin
./tools/binctl $(FIRMWARE_BUILD_DIR)/firmware.bin
bloaty: ## run bloaty size profiler
bloaty -d symbols -n 0 -s file $(FIRMWARE_BUILD_DIR)/firmware.elf | less
bloaty -d compileunits -n 0 -s file $(FIRMWARE_BUILD_DIR)/firmware.elf | less
sizecheck: ## check sizes of binary files
test $(BOARDLOADER_MAXSIZE) -ge $(shell wc -c < $(BOARDLOADER_BUILD_DIR)/boardloader.bin)
test $(BOOTLOADER_MAXSIZE) -ge $(shell wc -c < $(BOOTLOADER_BUILD_DIR)/bootloader.bin)
test $(FIRMWARE_MAXSIZE) -ge $(shell wc -c < $(FIRMWARE_BUILD_DIR)/firmware.bin)
combine: ## combine boardloader + bootloader + prodtest into one combined image
./tools/combine_firmware \
$(BOARDLOADER_START) $(BOARDLOADER_BUILD_DIR)/boardloader.bin \
$(BOOTLOADER_START) $(BOOTLOADER_BUILD_DIR)/bootloader.bin \
$(PRODTEST_START) $(PRODTEST_BUILD_DIR)/prodtest.bin \
> $(PRODTEST_BUILD_DIR)/combined.bin \
upload: ## upload firmware using trezorctl
trezorctl firmware_update -f $(FIRMWARE_BUILD_DIR)/firmware.bin
upload_prodtest: ## upload prodtest using trezorctl
trezorctl firmware_update -f $(PRODTEST_BUILD_DIR)/prodtest.bin
Reference in New Issue View Git Blame Copy Permalink