You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
215 lines
6.1 KiB
215 lines
6.1 KiB
/*
|
|
* This file is part of the Trezor project, https://trezor.io/
|
|
*
|
|
* Copyright (c) SatoshiLabs
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include STM32_HAL_H
|
|
|
|
#include "platform.h"
|
|
#include "rng.h"
|
|
#include TREZOR_BOARD
|
|
|
|
const uint8_t AHBPrescTable[16] = {0U, 0U, 0U, 0U, 0U, 0U, 0U, 0U,
|
|
1U, 2U, 3U, 4U, 6U, 7U, 8U, 9U};
|
|
const uint8_t APBPrescTable[8] = {0U, 0U, 0U, 0U, 1U, 2U, 3U, 4U};
|
|
const uint32_t MSIRangeTable[16] = {48000000U, 24000000U, 16000000U, 12000000U,
|
|
4000000U, 2000000U, 1330000U, 1000000U,
|
|
3072000U, 1536000U, 1024000U, 768000U,
|
|
400000U, 200000U, 133000U, 100000U};
|
|
typedef struct {
|
|
uint32_t freq;
|
|
uint32_t pllq;
|
|
uint32_t pllp;
|
|
uint32_t pllm;
|
|
uint32_t plln;
|
|
} clock_conf_t;
|
|
|
|
#if defined STM32U5
|
|
#define DEFAULT_FREQ 160U
|
|
#define DEFAULT_PLLM 1
|
|
#define DEFAULT_PLLN (10 * PLLN_COEF) // mult by 10
|
|
#define DEFAULT_PLLR 1U // division by 1
|
|
#define DEFAULT_PLLQ 1U // division by 1
|
|
#define DEFAULT_PLLP 5U // division by 5
|
|
#else
|
|
#error Unsupported MCU
|
|
#endif
|
|
|
|
uint32_t SystemCoreClock = DEFAULT_FREQ * 1000000U;
|
|
|
|
// PLLCLK = ((HSE / PLLM) * PLLN) / PLLR
|
|
#ifdef HSE_16MHZ
|
|
#define PLLN_COEF 1U
|
|
#elif defined HSE_8MHZ
|
|
#define PLLN_COEF 2U
|
|
#else
|
|
#error Unsupported HSE frequency
|
|
#endif
|
|
|
|
// assuming HSE 16 MHz
|
|
clock_conf_t clock_conf[1] = {
|
|
{
|
|
// clk = ((16MHz / 1) * 10) / 1 = 160 MHz
|
|
.freq = 160,
|
|
.pllp = 1,
|
|
.pllq = 1,
|
|
.pllm = 1,
|
|
.plln = 10 * PLLN_COEF,
|
|
},
|
|
};
|
|
|
|
#pragma GCC optimize( \
|
|
"no-stack-protector") // applies to all functions in this file
|
|
|
|
void SystemInit(void) {
|
|
// set flash wait states for an increasing HCLK frequency
|
|
|
|
FLASH->ACR = FLASH_ACR_LATENCY_5WS;
|
|
// wait until the new wait state config takes effect -- per section 3.5.1
|
|
// guidance
|
|
while ((FLASH->ACR & FLASH_ACR_LATENCY) != FLASH_ACR_LATENCY_5WS)
|
|
;
|
|
|
|
/* Reset the RCC clock configuration to the default reset state ------------*/
|
|
/* Set MSION bit */
|
|
RCC->CR = RCC_CR_MSISON;
|
|
|
|
/* Reset CFGR register */
|
|
RCC->CFGR1 = 0U;
|
|
RCC->CFGR2 = 0U;
|
|
RCC->CFGR3 = 0U;
|
|
|
|
/* Reset HSEON, CSSON , HSION, PLLxON bits */
|
|
RCC->CR &= ~(RCC_CR_HSEON | RCC_CR_CSSON | RCC_CR_PLL1ON | RCC_CR_PLL2ON |
|
|
RCC_CR_PLL3ON | RCC_CR_HSI48ON);
|
|
|
|
/* Reset PLLCFGR register */
|
|
RCC->PLL1CFGR = 0U;
|
|
|
|
/* Reset HSEBYP bit */
|
|
RCC->CR &= ~(RCC_CR_HSEBYP);
|
|
|
|
/* Disable all interrupts */
|
|
RCC->CIER = 0U;
|
|
|
|
__HAL_RCC_PWR_CLK_ENABLE();
|
|
|
|
MODIFY_REG(PWR->VOSR, (PWR_VOSR_VOS | PWR_VOSR_BOOSTEN),
|
|
PWR_REGULATOR_VOLTAGE_SCALE1);
|
|
while (HAL_IS_BIT_CLR(PWR->VOSR, PWR_VOSR_VOSRDY))
|
|
;
|
|
while (HAL_IS_BIT_CLR(PWR->SVMSR, PWR_SVMSR_ACTVOSRDY))
|
|
;
|
|
|
|
__HAL_RCC_HSE_CONFIG(RCC_HSE_ON);
|
|
while (READ_BIT(RCC->CR, RCC_CR_HSERDY) == 0U)
|
|
;
|
|
|
|
__HAL_RCC_PLL_CONFIG(RCC_PLLSOURCE_HSE, RCC_PLLMBOOST_DIV1, DEFAULT_PLLM,
|
|
DEFAULT_PLLN, DEFAULT_PLLP, DEFAULT_PLLQ, DEFAULT_PLLR);
|
|
|
|
__HAL_RCC_PLL_FRACN_DISABLE();
|
|
|
|
__HAL_RCC_PLL_VCIRANGE(RCC_PLLVCIRANGE_1);
|
|
|
|
__HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL1_DIVR);
|
|
|
|
__HAL_RCC_PLL_ENABLE();
|
|
while (READ_BIT(RCC->CR, RCC_CR_PLL1RDY) == 0U)
|
|
;
|
|
|
|
__HAL_RCC_HSI48_ENABLE();
|
|
while (READ_BIT(RCC->CR, RCC_CR_HSI48RDY) == 0U)
|
|
;
|
|
|
|
/** Initializes the CPU, AHB and APB buses clocks
|
|
*/
|
|
FLASH->ACR = FLASH_ACR_LATENCY_4WS;
|
|
// wait until the new wait state config takes effect -- per section 3.5.1
|
|
// guidance
|
|
while ((FLASH->ACR & FLASH_ACR_LATENCY) != FLASH_ACR_LATENCY_4WS)
|
|
;
|
|
MODIFY_REG(RCC->CFGR3, RCC_CFGR3_PPRE3, RCC_HCLK_DIV1);
|
|
MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PPRE2, ((RCC_HCLK_DIV1) << 4));
|
|
MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PPRE1, RCC_HCLK_DIV1);
|
|
MODIFY_REG(RCC->CFGR2, RCC_CFGR2_HPRE, RCC_SYSCLK_DIV1);
|
|
|
|
MODIFY_REG(RCC->CFGR1, RCC_CFGR1_SW, RCC_SYSCLKSOURCE_PLLCLK);
|
|
|
|
/*
|
|
* Disable the internal Pull-Up in Dead Battery pins of UCPD peripheral
|
|
*/
|
|
HAL_PWREx_DisableUCPDDeadBattery();
|
|
|
|
#ifdef USE_SMPS
|
|
/*
|
|
* Switch to SMPS regulator instead of LDO
|
|
*/
|
|
SET_BIT(PWR->CR3, PWR_CR3_REGSEL);
|
|
/* Wait until system switch on new regulator */
|
|
while (HAL_IS_BIT_CLR(PWR->SVMSR, PWR_SVMSR_REGS))
|
|
;
|
|
#endif
|
|
|
|
__HAL_RCC_PWR_CLK_DISABLE();
|
|
|
|
// this will be overriden by static initialization
|
|
SystemCoreClock = DEFAULT_FREQ * 1000000U;
|
|
|
|
// enable clock security system, HSE clock, and main PLL
|
|
RCC->CR |= RCC_CR_CSSON;
|
|
|
|
// turn off the HSI as it is now unused (it will be turned on again
|
|
// automatically if a clock security failure occurs)
|
|
RCC->CR &= ~RCC_CR_HSION;
|
|
// wait until ths HSI is off
|
|
while ((RCC->CR & RCC_CR_HSION) == RCC_CR_HSION)
|
|
;
|
|
|
|
// TODO turn off MSI?
|
|
|
|
// init the TRNG peripheral
|
|
rng_init();
|
|
|
|
// set CP10 and CP11 to enable full access to the fpu coprocessor;
|
|
SCB->CPACR |=
|
|
((3UL << 20U) | (3UL << 22U)); /* set CP10 and CP11 Full Access */
|
|
|
|
#if defined(__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)
|
|
SCB_NS->CPACR |=
|
|
((3UL << 20U) | (3UL << 22U)); /* set CP10 and CP11 Full Access */
|
|
#endif
|
|
|
|
// enable instruction cache in default 2-way mode
|
|
ICACHE->CR = ICACHE_CR_EN;
|
|
}
|
|
|
|
void drop_privileges(void) {
|
|
// jump to unprivileged mode
|
|
// http://infocenter.arm.com/help/topic/com.arm.doc.dui0552a/CHDBIBGJ.html
|
|
__asm__ volatile("msr control, %0" ::"r"(0x1));
|
|
__asm__ volatile("isb");
|
|
}
|
|
|
|
// from util.s
|
|
extern void shutdown_privileged(void);
|
|
|
|
void PVD_PVM_IRQHandler(void) {
|
|
TIM1->CCR1 = 0; // turn off display backlight
|
|
shutdown_privileged();
|
|
}
|