mirror of
https://github.com/trezor/trezor-firmware.git
synced 2024-12-22 22:38:08 +00:00
114 lines
3.9 KiB
Makefile
114 lines
3.9 KiB
Makefile
.PHONY: vendor
|
|
|
|
JOBS=4
|
|
MAKE=make -j $(JOBS)
|
|
BOARD=TREZORV2
|
|
|
|
STMHAL_BUILD_DIR=vendor/micropython/stmhal/build-$(BOARD)
|
|
|
|
help: ## show this help
|
|
@awk 'BEGIN {FS = ":.*?## "} /^[a-zA-Z0-9_-]+:.*?## / {printf "\033[36mmake %-20s\033[0m %s\n", $$1, $$2}' $(MAKEFILE_LIST)
|
|
|
|
vendor: ## update git submodules
|
|
git submodule update --init
|
|
|
|
res: ## update resources
|
|
./tools/res_collect.py
|
|
|
|
build: build_stmhal build_unix build_cross ## build stmhal, unix and mpy-cross micropython ports
|
|
|
|
build_stmhal: vendor ## build stmhal port
|
|
$(MAKE) -C vendor/micropython/stmhal BOARD=$(BOARD)
|
|
|
|
build_stmhal_debug: vendor ## build stmhal port with debug symbols
|
|
$(MAKE) -C vendor/micropython/stmhal BOARD=$(BOARD) DEBUG=1
|
|
|
|
build_stmhal_frozen: vendor res build_cross ## build stmhal port with frozen modules (from /src)
|
|
$(MAKE) -C vendor/micropython/stmhal BOARD=$(BOARD) FROZEN_MPY_DIR=../../../src
|
|
|
|
build_bootloader: vendor ## build bootloader
|
|
$(MAKE) -C vendor/micropython/stmhal -f Makefile.bootloader BOARD=$(BOARD) BUILD=build-$(BOARD)_bootloader
|
|
|
|
build_unix: vendor ## build unix port
|
|
$(MAKE) -C vendor/micropython/unix MICROPY_FORCE_32BIT=1
|
|
|
|
build_unix_debug: vendor ## build unix port with debug symbols
|
|
$(MAKE) -C vendor/micropython/unix MICROPY_FORCE_32BIT=1 DEBUG=1
|
|
|
|
build_unix_frozen: vendor res build_cross ## build unix port with frozen modules (from /src)
|
|
$(MAKE) -C vendor/micropython/unix MICROPY_FORCE_32BIT=1 FROZEN_MPY_DIR=../../../src
|
|
|
|
build_cross: vendor ## build mpy-cross port
|
|
$(MAKE) -C vendor/micropython/mpy-cross MICROPY_FORCE_32BIT=1
|
|
|
|
run: ## run unix port
|
|
cd src ; ../vendor/micropython/unix/micropython
|
|
|
|
emu: ## run emulator
|
|
./emu.sh
|
|
|
|
clean: clean_stmhal clean_bootloader clean_unix clean_cross ## clean all builds
|
|
|
|
clean_stmhal: ## clean stmhal build
|
|
$(MAKE) -C vendor/micropython/stmhal clean BOARD=$(BOARD)
|
|
|
|
clean_bootloader: ## clean stmhal build
|
|
$(MAKE) -C vendor/micropython/stmhal -f Makefile.bootloader clean BOARD=$(BOARD) BUILD=build-$(BOARD)_bootloader
|
|
|
|
clean_unix: ## clean unix build
|
|
$(MAKE) -C vendor/micropython/unix clean
|
|
|
|
clean_cross: ## clean mpy-cross build
|
|
$(MAKE) -C vendor/micropython/mpy-cross clean
|
|
|
|
test: ## run unit tests
|
|
cd tests ; ./run_tests.sh
|
|
|
|
testpy: ## run selected unit tests from python-trezor
|
|
cd tests ; ./run_tests_python_trezor.sh
|
|
|
|
flash: ## flash firmware using st-flash
|
|
st-flash write $(STMHAL_BUILD_DIR)/firmware0.bin 0x8000000
|
|
sleep 0.1
|
|
st-flash write $(STMHAL_BUILD_DIR)/firmware1.bin 0x8020000
|
|
|
|
flash_bl: vendor ## flash bootloader using st-flash
|
|
st-flash write $(STMHAL_BUILD_DIR)_bootloader/firmware0.bin 0x8000000
|
|
sleep 0.1
|
|
st-flash write $(STMHAL_BUILD_DIR)_bootloader/firmware1.bin 0x8020000
|
|
|
|
openocd_flash: $(STMHAL_BUILD_DIR)/firmware.hex ## flash firmware using openocd
|
|
openocd -f interface/stlink-v2.cfg -f target/stm32f4x.cfg \
|
|
-c "init" \
|
|
-c "reset init" \
|
|
-c "stm32f4x mass_erase 0" \
|
|
-c "flash write_image $(STMHAL_BUILD_DIR)/firmware.hex" \
|
|
-c "reset" \
|
|
-c "shutdown"
|
|
|
|
openocd_flash_bl: $(STMHAL_BUILD_DIR)_bootloader/firmware.hex ## flash bootloader using openocd
|
|
openocd -f interface/stlink-v2.cfg -f target/stm32f4x.cfg \
|
|
-c "init" \
|
|
-c "reset init" \
|
|
-c "stm32f4x mass_erase 0" \
|
|
-c "flash write_image $(STMHAL_BUILD_DIR)_bootloader/firmware.hex" \
|
|
-c "reset" \
|
|
-c "shutdown"
|
|
|
|
openocd: ## start openocd which connects to the device
|
|
openocd -f interface/stlink-v2.cfg -f target/stm32f4x.cfg
|
|
|
|
gdb: ## start remote gdb session which connects to the openocd
|
|
arm-none-eabi-gdb $(STMHAL_BUILD_DIR)/firmware.elf -ex 'target remote localhost:3333'
|
|
|
|
gdb_bl: ## start remote gdb session which connects to the openocd
|
|
arm-none-eabi-gdb $(STMHAL_BUILD_DIR)_bootloader/firmware.elf -ex 'target remote localhost:3333'
|
|
|
|
load: ## load contents of src into mass storage of trezor
|
|
rm -rf /run/media/${USER}/PYBFLASH/*
|
|
cp -a src/apps /run/media/${USER}/PYBFLASH/
|
|
cp -a src/lib /run/media/${USER}/PYBFLASH/
|
|
cp -a src/trezor /run/media/${USER}/PYBFLASH/
|
|
cp -a src/*.py /run/media/${USER}/PYBFLASH/
|
|
sync
|