mirror of
https://github.com/trezor/trezor-firmware.git
synced 2024-11-27 01:48:17 +00:00
124 lines
4.6 KiB
C
124 lines
4.6 KiB
C
/*
|
|
* This file is part of the TREZOR project.
|
|
*
|
|
* Copyright (C) 2014 Pavol Rusnak <stick@satoshilabs.com>
|
|
*
|
|
* This library is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU Lesser General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU Lesser General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU Lesser General Public License
|
|
* along with this library. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <libopencm3/cm3/scb.h>
|
|
#include <libopencm3/stm32/rcc.h>
|
|
#include <libopencm3/stm32/gpio.h>
|
|
#include <libopencm3/stm32/spi.h>
|
|
#include <libopencm3/stm32/f2/rng.h>
|
|
|
|
#include "rng.h"
|
|
#include "layout.h"
|
|
|
|
uint32_t __stack_chk_guard;
|
|
|
|
void __attribute__((noreturn)) __stack_chk_fail(void)
|
|
{
|
|
layoutDialog(&bmp_icon_error, NULL, NULL, NULL, "Stack smashing", "detected.", NULL, "Please unplug", "the device.", NULL);
|
|
for (;;) {} // loop forever
|
|
}
|
|
|
|
void nmi_handler(void)
|
|
{
|
|
// Clock Security System triggered NMI
|
|
if ((RCC_CIR & RCC_CIR_CSSF) != 0) {
|
|
layoutDialog(&bmp_icon_error, NULL, NULL, NULL, "Clock instability", "detected.", NULL, "Please unplug", "the device.", NULL);
|
|
for (;;) {} // loop forever
|
|
}
|
|
}
|
|
|
|
void setup(void)
|
|
{
|
|
// set SCB_CCR STKALIGN bit to make sure 8-byte stack alignment on exception entry is in effect.
|
|
// This is not strictly necessary for the current TREZOR system.
|
|
// This is here to comply with guidance from section 3.3.3 "Binary compatibility with other Cortex processors"
|
|
// of the ARM Cortex-M3 Processor Technical Reference Manual.
|
|
// According to section 4.4.2 and 4.4.7 of the "STM32F10xxx/20xxx/21xxx/L1xxxx Cortex-M3 programming manual",
|
|
// STM32F2 series MCUs are r2p0 and always have this bit set on reset already.
|
|
SCB_CCR |= SCB_CCR_STKALIGN;
|
|
|
|
// setup clock
|
|
struct rcc_clock_scale clock = rcc_hse_8mhz_3v3[RCC_CLOCK_3V3_120MHZ];
|
|
rcc_clock_setup_hse_3v3(&clock);
|
|
|
|
// enable GPIO clock - A (oled), B(oled), C (buttons)
|
|
rcc_periph_clock_enable(RCC_GPIOA);
|
|
rcc_periph_clock_enable(RCC_GPIOB);
|
|
rcc_periph_clock_enable(RCC_GPIOC);
|
|
|
|
// enable SPI clock
|
|
rcc_periph_clock_enable(RCC_SPI1);
|
|
|
|
// enable OTG FS clock
|
|
rcc_periph_clock_enable(RCC_OTGFS);
|
|
|
|
// enable RNG
|
|
rcc_periph_clock_enable(RCC_RNG);
|
|
RNG_CR |= RNG_CR_RNGEN;
|
|
// to be extra careful and heed the STM32F205xx Reference manual, Section 20.3.1
|
|
// we don't use the first random number generated after setting the RNGEN bit in setup
|
|
random32();
|
|
|
|
// enable CSS (Clock Security System)
|
|
RCC_CR |= RCC_CR_CSSON;
|
|
|
|
// set GPIO for buttons
|
|
gpio_mode_setup(GPIOC, GPIO_MODE_INPUT, GPIO_PUPD_PULLUP, GPIO2 | GPIO5);
|
|
|
|
// set GPIO for OLED display
|
|
gpio_mode_setup(GPIOA, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, GPIO4);
|
|
gpio_mode_setup(GPIOB, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, GPIO0 | GPIO1);
|
|
|
|
// enable SPI 1 for OLED display
|
|
gpio_mode_setup(GPIOA, GPIO_MODE_AF, GPIO_PUPD_NONE, GPIO5 | GPIO7);
|
|
gpio_set_af(GPIOA, GPIO_AF5, GPIO5 | GPIO7);
|
|
|
|
// spi_disable_crc(SPI1);
|
|
spi_init_master(SPI1, SPI_CR1_BAUDRATE_FPCLK_DIV_8, SPI_CR1_CPOL_CLK_TO_0_WHEN_IDLE, SPI_CR1_CPHA_CLK_TRANSITION_1, SPI_CR1_DFF_8BIT, SPI_CR1_MSBFIRST);
|
|
spi_enable_ss_output(SPI1);
|
|
// spi_enable_software_slave_management(SPI1);
|
|
// spi_set_nss_high(SPI1);
|
|
// spi_clear_mode_fault(SPI1);
|
|
spi_enable(SPI1);
|
|
|
|
// enable OTG_FS
|
|
gpio_mode_setup(GPIOA, GPIO_MODE_AF, GPIO_PUPD_NONE, GPIO11 | GPIO12);
|
|
gpio_set_af(GPIOA, GPIO_AF10, GPIO11 | GPIO12);
|
|
}
|
|
|
|
void setupApp(void)
|
|
{
|
|
// for completeness, disable RNG peripheral interrupts for old bootloaders that had
|
|
// enabled them in RNG control register (the RNG interrupt was never enabled in the NVIC)
|
|
RNG_CR &= ~RNG_CR_IE;
|
|
// the static variables in random32 are separate between the bootloader and firmware.
|
|
// therefore, they need to be initialized here so that we can be sure to avoid dupes.
|
|
// this is to try to comply with STM32F205xx Reference manual - Section 20.3.1:
|
|
// "Each subsequent generated random number has to be compared with the previously generated
|
|
// number. The test fails if any two compared numbers are equal (continuous random number generator test)."
|
|
random32();
|
|
|
|
// enable CSS (Clock Security System)
|
|
RCC_CR |= RCC_CR_CSSON;
|
|
|
|
// hotfix for old bootloader
|
|
gpio_mode_setup(GPIOA, GPIO_MODE_INPUT, GPIO_PUPD_NONE, GPIO9);
|
|
spi_init_master(SPI1, SPI_CR1_BAUDRATE_FPCLK_DIV_8, SPI_CR1_CPOL_CLK_TO_0_WHEN_IDLE, SPI_CR1_CPHA_CLK_TRANSITION_1, SPI_CR1_DFF_8BIT, SPI_CR1_MSBFIRST);
|
|
}
|