1
0
mirror of https://github.com/trezor/trezor-firmware.git synced 2024-11-30 11:28:21 +00:00
trezor-firmware/core/Makefile
2024-11-25 16:23:05 +01:00

504 lines
20 KiB
Makefile

.PHONY: vendor
# get the number of CPU cores in a "portable" manner
# (accounting for darwin and big.LITTLE archs)
JOBS = $(shell sysctl -n hw.perflevel0.physicalcpu 2>/dev/null ||\
sysctl -n hw.physicalcpu 2>/dev/null ||\
sysctl -n hw.ncpu 2>/dev/null ||\
nproc 2>/dev/null ||\
echo 4)
MAKE = make -j $(JOBS)
BUILD_DIR = build
BOARDLOADER_BUILD_DIR = $(BUILD_DIR)/boardloader
BOOTLOADER_BUILD_DIR = $(BUILD_DIR)/bootloader
BOOTLOADER_CI_BUILD_DIR = $(BUILD_DIR)/bootloader_ci
BOOTLOADER_EMU_BUILD_DIR = $(BUILD_DIR)/bootloader_emu
PRODTEST_BUILD_DIR = $(BUILD_DIR)/prodtest
REFLASH_BUILD_DIR = $(BUILD_DIR)/reflash
KERNEL_BUILD_DIR = $(BUILD_DIR)/kernel
FIRMWARE_BUILD_DIR = $(BUILD_DIR)/firmware
UNIX_BUILD_DIR = $(BUILD_DIR)/unix
RUST_BUILD_DIR = $(BUILD_DIR)/rust
UNAME_S := $(shell uname -s)
UNIX_PORT_OPTS ?=
CROSS_PORT_OPTS ?=
PRODUCTION ?= 0
PYOPT ?= 1
BITCOIN_ONLY ?= 0
BOOTLOADER_QA ?= 0
BOOTLOADER_DEVEL ?= 0
TREZOR_MODEL ?= T
TREZOR_MEMPERF ?= 0
ADDRESS_SANITIZER ?= 0
CMAKELISTS ?= 0
PYTEST_TIMEOUT ?= 500
TEST_LANG ?= "en"
THP ?= 0
BENCHMARK ?= 0
TREZOR_EMULATOR_DEBUGGABLE ?= 0
QUIET_MODE ?= 0
# OpenOCD interface default. Alternative: ftdi/olimex-arm-usb-tiny-h
OPENOCD_INTERFACE ?= stlink
# OpenOCD transport default. Alternative: jtag
OPENOCD_TRANSPORT ?= hla_swd
ifeq ($(TREZOR_MODEL),$(filter $(TREZOR_MODEL),T))
MCU = STM32F4
OPENOCD_TARGET = target/stm32f4x.cfg
MODEL_FEATURE = model_tt
else ifeq ($(TREZOR_MODEL),$(filter $(TREZOR_MODEL),R))
MCU = STM32F4
OPENOCD_TARGET = target/stm32f4x.cfg
MODEL_FEATURE = model_tr
else ifeq ($(TREZOR_MODEL),$(filter $(TREZOR_MODEL),T3T1))
MCU = STM32U5
OPENOCD_TARGET = target/stm32u5x.cfg
MODEL_FEATURE = model_mercury
else ifeq ($(TREZOR_MODEL),$(filter $(TREZOR_MODEL),T3B1))
MCU = STM32U5
OPENOCD_TARGET = target/stm32u5x.cfg
MODEL_FEATURE = model_tr
else ifeq ($(TREZOR_MODEL),$(filter $(TREZOR_MODEL),T3W1))
MCU = STM32U5
OPENOCD_TARGET = target/stm32u5x.cfg
MODEL_FEATURE = model_tt
else ifeq ($(TREZOR_MODEL),$(filter $(TREZOR_MODEL),DISC1))
MCU = STM32F4
OPENOCD_TARGET = target/stm32f4x.cfg
else ifeq ($(TREZOR_MODEL),$(filter $(TREZOR_MODEL),DISC2))
MCU = STM32U5
OPENOCD_TARGET = target/stm32u5x.cfg
else
$(error Unknown TREZOR_MODEL: $(TREZOR_MODEL))
endif
FLASH_START = $(shell layout_parser ${TREZOR_MODEL} FLASH_START)
BOARDLOADER_START = $(shell layout_parser ${TREZOR_MODEL} BOARDLOADER_START)
BOOTLOADER_START = $(shell layout_parser ${TREZOR_MODEL} BOOTLOADER_START)
KERNEL_START = $(shell layout_parser ${TREZOR_MODEL} KERNEL_START)
FIRMWARE_START = $(shell layout_parser ${TREZOR_MODEL} FIRMWARE_START)
FIRMWARE_P2_START = $(shell layout_parser ${TREZOR_MODEL} FIRMWARE_P2_START)
STORAGE_1_START = $(shell layout_parser ${TREZOR_MODEL} STORAGE_1_START)
STORAGE_2_START = $(shell layout_parser ${TREZOR_MODEL} STORAGE_2_START)
STORAGE_SIZE = $(shell layout_parser ${TREZOR_MODEL} NORCOW_SECTOR_SIZE)
BOARDLOADER_MAXSIZE = $(shell layout_parser ${TREZOR_MODEL} BOARDLOADER_MAXSIZE)
BOOTLOADER_MAXSIZE = $(shell layout_parser ${TREZOR_MODEL} BOOTLOADER_MAXSIZE)
FIRMWARE_MAXSIZE = $(shell layout_parser ${TREZOR_MODEL} FIRMWARE_MAXSIZE)
FIRMWARE_P1_MAXSIZE = $(shell layout_parser ${TREZOR_MODEL} FIRMWARE_P1_MAXSIZE)
FIRMWARE_P2_MAXSIZE = $(shell layout_parser ${TREZOR_MODEL} FIRMWARE_P2_MAXSIZE)
BOARDLOADER_SECTOR_START = $(shell layout_parser ${TREZOR_MODEL} BOARDLOADER_SECTOR_START)
BOARDLOADER_SECTOR_END = $(shell layout_parser ${TREZOR_MODEL} BOARDLOADER_SECTOR_END)
BOOTLOADER_SECTOR_START = $(shell layout_parser ${TREZOR_MODEL} BOOTLOADER_SECTOR_START)
BOOTLOADER_SECTOR_END = $(shell layout_parser ${TREZOR_MODEL} BOOTLOADER_SECTOR_END)
FIRMWARE_SECTOR_START = $(shell layout_parser ${TREZOR_MODEL} FIRMWARE_SECTOR_START)
FIRMWARE_SECTOR_END = $(shell layout_parser ${TREZOR_MODEL} FIRMWARE_SECTOR_END)
FIRMWARE_P1_SECTOR_START = $(shell layout_parser ${TREZOR_MODEL} FIRMWARE_P1_SECTOR_START)
FIRMWARE_P1_SECTOR_END = $(shell layout_parser ${TREZOR_MODEL} FIRMWARE_P1_SECTOR_END)
FIRMWARE_P2_SECTOR_START = $(shell layout_parser ${TREZOR_MODEL} FIRMWARE_P2_SECTOR_START)
FIRMWARE_P2_SECTOR_END = $(shell layout_parser ${TREZOR_MODEL} FIRMWARE_P2_SECTOR_END)
STORAGE_1_SECTOR_START = $(shell layout_parser ${TREZOR_MODEL} STORAGE_1_SECTOR_START)
STORAGE_1_SECTOR_END = $(shell layout_parser ${TREZOR_MODEL} STORAGE_1_SECTOR_END)
STORAGE_2_SECTOR_START = $(shell layout_parser ${TREZOR_MODEL} STORAGE_2_SECTOR_START)
STORAGE_2_SECTOR_END = $(shell layout_parser ${TREZOR_MODEL} STORAGE_2_SECTOR_END)
STORAGE_1_OFFSET := $(shell expr $(STORAGE_1_START) - $(FLASH_START))
STORAGE_2_OFFSET := $(shell expr $(STORAGE_2_START) - $(FLASH_START))
OPENOCD = openocd -f interface/$(OPENOCD_INTERFACE).cfg -c "transport select $(OPENOCD_TRANSPORT)" -f $(OPENOCD_TARGET)
CFLAGS += -DSCM_REVISION='\"$(shell git rev-parse HEAD | sed 's:\(..\):\\x\1:g')\"'
TESTPATH = $(CURDIR)/../tests
EMU = $(CURDIR)/emu.py
EMU_LOG_FILE ?= $(TESTPATH)/trezor.log
EMU_TEST_ARGS = --disable-animation --headless --output=$(EMU_LOG_FILE) --temporary-profile
EMU_TEST = $(EMU) $(EMU_TEST_ARGS) -c
JUNIT_XML ?= $(TESTPATH)/junit.xml
PYTEST = pytest --junitxml=$(JUNIT_XML)
TREZOR_FIDO2_UDP_PORT = 21326
RUST_TARGET=$(shell rustc -vV | sed -n 's/host: //p')
MULTICORE ?= "auto"
RANDOM=$(shell python -c 'import random; print(random.randint(0, 1000000))')
SCONS_VARS = \
BENCHMARK="$(BENCHMARK)" \
BITCOIN_ONLY="$(BITCOIN_ONLY)" \
BOOTLOADER_DEVEL="$(BOOTLOADER_DEVEL)" \
BOOTLOADER_QA="$(BOOTLOADER_QA)" \
CFLAGS="$(CFLAGS)" \
CMAKELISTS="$(CMAKELISTS)" \
DISABLE_OPTIGA="$(DISABLE_OPTIGA)" \
NEW_RENDERING="$(NEW_RENDERING)" \
PRODUCTION="$(PRODUCTION)" \
PYOPT="$(PYOPT)" \
QUIET_MODE="$(QUIET_MODE)" \
THP="$(THP)" \
TREZOR_EMULATOR_ASAN="$(ADDRESS_SANITIZER)" \
TREZOR_EMULATOR_DEBUGGABLE=$(TREZOR_EMULATOR_DEBUGGABLE) \
TREZOR_MEMPERF="$(TREZOR_MEMPERF)" \
TREZOR_MODEL="$(TREZOR_MODEL)"
SCONS_OPTS = -Q -j $(JOBS)
ifeq ($(QUIET_MODE),1)
SCONS_OPTS += --quiet
endif
SCONS = scons $(SCONS_OPTS) $(SCONS_VARS)
## help commands:
help: ## show this help
@awk -f ../tools/help.awk $(MAKEFILE_LIST)
## dependencies commands:
vendor: ## update git submodules
git submodule update --init --recursive --force
## emulator commands:
run: ## run unix port
cd src ; ../$(UNIX_BUILD_DIR)/trezor-emu-core
emu: ## run emulator
$(EMU)
## test commands:
test: ## run unit tests
cd tests ; ./run_tests.sh $(TESTOPTS)
test_rust: ## run rs unit tests
export BUILD_DIR=$(abspath $(UNIX_BUILD_DIR)) ; \
cd embed/rust ; cargo test $(TESTOPTS) --target=$(RUST_TARGET) \
--no-default-features --features $(MODEL_FEATURE),test \
-- --test-threads=1 --nocapture
test_emu: ## run selected device tests from python-trezor
$(EMU_TEST) $(PYTEST) $(TESTPATH)/device_tests $(TESTOPTS) --lang=$(TEST_LANG)
test_emu_multicore: ## run device tests using multiple cores
$(PYTEST) -n $(MULTICORE) $(TESTPATH)/device_tests $(TESTOPTS) --timeout $(PYTEST_TIMEOUT) \
--control-emulators --model=core --random-order-seed=$(RANDOM) \
--lang=$(TEST_LANG)
test_emu_monero: ## run selected monero device tests from monero-agent
cd tests ; $(EMU_TEST) ./run_tests_device_emu_monero.sh $(TESTOPTS)
test_emu_u2f: ## run selected u2f device tests from u2f-tests-hid
$(EMU_TEST) --slip0014 $(TESTPATH)/fido_tests/u2f-tests-hid/HIDTest $(TREZOR_FIDO2_UDP_PORT) $(TESTOPTS)
$(EMU_TEST) --slip0014 $(TESTPATH)/fido_tests/u2f-tests-hid/U2FTest $(TREZOR_FIDO2_UDP_PORT) $(TESTOPTS)
test_emu_fido2: ## run fido2 device tests
cd $(TESTPATH)/fido_tests/fido2 ; \
$(EMU_TEST) --slip0014 $(PYTEST) --maxfail=5 --sim tests/standard/ --vendor trezor $(TESTOPTS)
test_emu_click: ## run click tests
$(EMU_TEST) $(PYTEST) $(TESTPATH)/click_tests $(TESTOPTS) --lang=$(TEST_LANG)
test_emu_click_ui: ## run click tests with UI testing
$(EMU_TEST) $(PYTEST) $(TESTPATH)/click_tests $(TESTOPTS) \
--ui=test --ui-check-missing --do-master-diff --lang=$(TEST_LANG)
test_emu_persistence: ## run persistence tests
$(PYTEST) $(TESTPATH)/persistence_tests $(TESTOPTS) --lang=$(TEST_LANG)
test_emu_persistence_ui: ## run persistence tests with UI testing
$(PYTEST) $(TESTPATH)/persistence_tests $(TESTOPTS) \
--ui=test --ui-check-missing --do-master-diff --lang=$(TEST_LANG)
test_emu_ui: ## run ui integration tests
$(EMU_TEST) $(PYTEST) $(TESTPATH)/device_tests $(TESTOPTS) \
--ui=test --ui-check-missing --record-text-layout --do-master-diff \
--lang=$(TEST_LANG)
test_emu_ui_multicore: ## run ui integration tests using multiple cores
$(PYTEST) -n $(MULTICORE) $(TESTPATH)/device_tests $(TESTOPTS) --timeout $(PYTEST_TIMEOUT) \
--ui=test --ui-check-missing --record-text-layout --do-master-diff \
--control-emulators --model=core --random-order-seed=$(RANDOM) \
--lang=$(TEST_LANG)
test_emu_ui_record: ## record and hash screens for ui integration tests
$(EMU_TEST) $(PYTEST) $(TESTPATH)/device_tests $(TESTOPTS) \
--ui=record --ui-check-missing --do-master-diff --lang=$(TEST_LANG)
test_emu_ui_record_multicore: ## quickly record all screens
make test_emu_ui_multicore || echo "All errors are recorded in fixtures.json"
../tests/update_fixtures.py local -r
pylint: ## run pylint on application sources and tests
pylint -E $(shell find src tests -name *.py)
mypy: ## deprecated; use "make typecheck"
@echo "mypy is deprecated; use 'make typecheck'"
make typecheck
typecheck: pyright
pyright:
python ../tools/pyright_tool.py
clippy:
export BUILD_DIR=$(abspath $(UNIX_BUILD_DIR)) ; \
cd embed/rust ; cargo clippy $(TESTOPTS) --all-features --target=$(RUST_TARGET)
## code generation:
templates: translations ## render Mako templates (for lists of coins, tokens, etc.)
./tools/build_templates
templates_check: translations_check ## check that Mako-rendered files match their templates
./tools/build_templates --check
translations: ## update translations
python ./translations/order.py
python ./translations/cli.py gen
translations_check: ## check that translations are up to date
python ./translations/order.py --check
python ./translations/cli.py gen --check
# spits out error if the stored merkle root is not up to date
python ./translations/cli.py merkle-root > /dev/null
## build commands:
build: build_boardloader build_bootloader build_firmware build_prodtest build_unix ## build all
build_embed: build_boardloader build_bootloader build_firmware # build boardloader, bootloader, firmware
build_boardloader: ## build boardloader
$(SCONS) $(BOARDLOADER_BUILD_DIR)/boardloader.bin
build_bootloader: ## build bootloader
$(SCONS) $(BOOTLOADER_BUILD_DIR)/bootloader.bin
build_bootloader_ci: ## build CI device testing bootloader
$(SCONS) $(BOOTLOADER_CI_BUILD_DIR)/bootloader.bin
build_bootloader_emu: ## build the unix bootloader emulator
$(SCONS) $(BOOTLOADER_EMU_BUILD_DIR)/bootloader.elf
build_bootloader_emu_debug: ## build the unix bootloader emulator
$(SCONS) TREZOR_EMULATOR_DEBUGGABLE=1 $(BOOTLOADER_EMU_BUILD_DIR)/bootloader.elf
build_prodtest: ## build production test firmware
$(SCONS) $(PRODTEST_BUILD_DIR)/prodtest.bin
build_reflash: ## build reflash firmware + reflash image
$(SCONS) $(REFLASH_BUILD_DIR)/reflash.bin
dd if=build/boardloader/boardloader.bin of=$(REFLASH_BUILD_DIR)/sdimage.bin bs=1 seek=0
dd if=build/bootloader/bootloader.bin of=$(REFLASH_BUILD_DIR)/sdimage.bin bs=1 seek=49152
build_kernel: ## build kernel image
$(SCONS) PYOPT=1 $(KERNEL_BUILD_DIR)/kernel.bin
build_firmware: templates build_cross build_kernel ## build firmware with frozen modules
$(SCONS) $(FIRMWARE_BUILD_DIR)/firmware.bin
build_unix: templates ## build unix port
$(SCONS) PYOPT=0 $(UNIX_BUILD_DIR)/trezor-emu-core $(UNIX_PORT_OPTS)
build_unix_frozen: templates build_cross ## build unix port with frozen modules
$(SCONS) $(UNIX_BUILD_DIR)/trezor-emu-core $(UNIX_PORT_OPTS) TREZOR_EMULATOR_FROZEN=1
build_unix_debug: templates ## build unix port
$(SCONS) --max-drift=1 $(UNIX_BUILD_DIR)/trezor-emu-core $(UNIX_PORT_OPTS) \
TREZOR_EMULATOR_ASAN=1 TREZOR_EMULATOR_DEBUGGABLE=1
build_cross: ## build mpy-cross port
$(MAKE) -C vendor/micropython/mpy-cross $(CROSS_PORT_OPTS)
## clean commands:
clean: clean_boardloader clean_bootloader clean_bootloader_emu clean_bootloader_ci clean_prodtest clean_reflash clean_firmware clean_unix clean_cross ## clean all
rm -f ".sconsign.dblite"
clean_boardloader: ## clean boardloader build
rm -rf $(BOARDLOADER_BUILD_DIR)
clean_bootloader: ## clean bootloader build
rm -rf $(BOOTLOADER_BUILD_DIR)
clean_bootloader_ci: ## clean bootloader_ci build
rm -rf $(BOOTLOADER_CI_BUILD_DIR)
clean_bootloader_emu: ## clean bootloader_emu build
rm -rf $(BOOTLOADER_EMU_BUILD_DIR)
clean_prodtest: ## clean prodtest build
rm -rf $(PRODTEST_BUILD_DIR)
clean_reflash: ## clean reflash build
rm -rf $(REFLASH_BUILD_DIR)
clean_kernel: ## clean kernel build
rm -rf $(KERNEL_BUILD_DIR)
clean_firmware: ## clean firmware build
rm -rf $(FIRMWARE_BUILD_DIR) $(RUST_BUILD_DIR)
clean_unix: ## clean unix build
rm -rf $(UNIX_BUILD_DIR) $(RUST_BUILD_DIR)
clean_cross: ## clean mpy-cross build
$(MAKE) -C vendor/micropython/mpy-cross clean $(CROSS_PORT_OPTS)
## flash commands:
flash: flash_boardloader flash_bootloader flash_firmware ## flash everything using OpenOCD
flash_boardloader: $(BOARDLOADER_BUILD_DIR)/boardloader.bin ## flash boardloader using OpenOCD
$(OPENOCD) -c "init; reset halt; flash write_image erase $< $(BOARDLOADER_START); exit"
flash_bootloader: $(BOOTLOADER_BUILD_DIR)/bootloader.bin ## flash bootloader using OpenOCD
$(OPENOCD) -c "init; reset halt; flash write_image erase $< $(BOOTLOADER_START); exit"
flash_bootloader_ci: $(BOOTLOADER_CI_BUILD_DIR)/bootloader.bin ## flash CI bootloader using OpenOCD
$(OPENOCD) -c "init; reset halt; flash write_image erase $< $(BOOTLOADER_START); exit"
flash_prodtest: $(PRODTEST_BUILD_DIR)/prodtest.bin ## flash prodtest using OpenOCD
$(OPENOCD) -c "init; reset halt; flash write_image erase $< $(FIRMWARE_START); exit"
flash_firmware: $(FIRMWARE_BUILD_DIR)/firmware.bin ## flash firmware using OpenOCD
ifeq ($(MCU),$(filter $(MCU),STM32F4))
$(OPENOCD) -c "init; reset halt; flash write_image erase $<.p1 $(FIRMWARE_START); flash write_image erase $<.p2 $(FIRMWARE_P2_START); exit"
else
$(OPENOCD) -c "init; reset halt; flash write_image erase $< $(FIRMWARE_START); exit"
endif
flash_combine: $(PRODTEST_BUILD_DIR)/combined.bin ## flash combined using OpenOCD
$(OPENOCD) -c "init; reset halt; flash write_image erase $< $(BOARDLOADER_START); exit"
flash_erase: ## erase all sectors in flash bank 0
$(OPENOCD) -c "init; reset halt; flash info 0; flash erase_sector 0 0 last; flash erase_check 0; exit"
flash_erase_bootloader: ## erase bootloader
$(OPENOCD) -c "init; reset halt; flash info 0; flash erase_sector 0 $(BOOTLOADER_SECTOR_START) $(BOOTLOADER_SECTOR_END); exit"
flash_erase_firmware: ## erase bootloader
ifeq ($(MCU),$(filter $(MCU),STM32F4))
$(OPENOCD) -c "init; reset halt; flash info 0; flash erase_sector 0 $(FIRMWARE_P1_SECTOR_START) $(FIRMWARE_P1_SECTOR_END); flash erase_sector 0 $(FIRMWARE_P2_SECTOR_START) $(FIRMWARE_P2_SECTOR_END); exit"
else
$(OPENOCD) -c "init; reset halt; flash info 0; flash erase_sector 0 $(FIRMWARE_SECTOR_START) $(FIRMWARE_SECTOR_END); exit"
endif
flash_read_storage: ## read storage sectors from flash
$(OPENOCD) -c "init; reset halt; flash read_bank 0 storage1.data $(STORAGE_1_OFFSET) $(STORAGE_SIZE); flash read_bank 0 storage2.data $(STORAGE_2_OFFSET) $(STORAGE_SIZE); exit"
flash_erase_storage: ## erase storage sectors from flash
$(OPENOCD) -c "init; reset halt; flash erase_sector 0 $(STORAGE_1_SECTOR_START) $(STORAGE_1_SECTOR_END); flash erase_sector 0 $(STORAGE_2_SECTOR_START) $(STORAGE_2_SECTOR_END); exit"
flash_bootloader_jlink: $(BOOTLOADER_BUILD_DIR)/bootloader.bin ## flash bootloader using JLink
JLinkExe -nogui 1 -commanderscript embed/projects/bootloader/bootloader_flash.jlink
flash_bootloader_ci_jlink: $(BOOTLOADER_CI_BUILD_DIR)/bootloader.bin ## flash CI bootloader using JLink
JLinkExe -nogui 1 -commanderscript embed/projects/bootloader_ci/bootloader_flash.jlink
flash_firmware_jlink: $(FIRMWARE_BUILD_DIR)/firmware.bin ## flash firmware using JLink. file names must end in .bin for JLink
cp -f $<.p1 $<.p1.bin
cp -f $<.p2 $<.p2.bin
## pad 2nd part so that FW integrity works after flash
## read&compare in flashing will avoid erasing unmodified sectors
truncate -s $(FIRMWARE_P2_MAXSIZE) $<.p2.bin
JLinkExe -nogui 1 -commanderscript embed/projects/firmware/firmware_flash.jlink
## openocd debug commands:
openocd: ## start openocd which connects to the device
$(OPENOCD)
openocd_reset: ## cause a system reset using OpenOCD
$(OPENOCD) -c "init; reset; exit"
GDB = arm-none-eabi-gdb --nx -ex 'set remotetimeout unlimited' -ex 'set confirm off' -ex 'target remote 127.0.0.1:3333' -ex 'monitor reset halt'
gdb_boardloader: $(BOARDLOADER_BUILD_DIR)/boardloader.elf ## start remote gdb session to openocd with boardloader symbols
$(GDB) $<
gdb_bootloader: $(BOOTLOADER_BUILD_DIR)/bootloader.elf ## start remote gdb session to openocd with bootloader symbols
$(GDB) $<
gdb_prodtest: $(PRODTEST_BUILD_DIR)/prodtest.elf ## start remote gdb session to openocd with prodtest symbols
$(GDB) $<
gdb_firmware: $(FIRMWARE_BUILD_DIR)/firmware.elf ## start remote gdb session to openocd with firmware symbols
$(GDB) $<
## misc commands:
binctl: ## print info about binary files
./tools/headertool.py $(BOOTLOADER_BUILD_DIR)/bootloader.bin
./tools/headertool.py $(FIRMWARE_BUILD_DIR)/firmware.bin
bloaty: ## run bloaty size profiler
bloaty -d symbols -n 0 -s file $(FIRMWARE_BUILD_DIR)/firmware.elf | less
bloaty -d compileunits -n 0 -s file $(FIRMWARE_BUILD_DIR)/firmware.elf | less
ifeq ($(MCU),$(filter $(MCU),STM32F4))
sizecheck: ## check sizes of binary files
test "$(BOARDLOADER_MAXSIZE)" -ge "$(shell wc -c < $(BOARDLOADER_BUILD_DIR)/boardloader.bin)"
test "$(BOOTLOADER_MAXSIZE)" -ge "$(shell wc -c < $(BOOTLOADER_BUILD_DIR)/bootloader.bin)"
test "$(FIRMWARE_P1_MAXSIZE)" -ge "$(shell wc -c < $(FIRMWARE_BUILD_DIR)/firmware.bin.p1)"
test "$(FIRMWARE_P2_MAXSIZE)" -ge "$(shell wc -c < $(FIRMWARE_BUILD_DIR)/firmware.bin.p2)"
test "$(FIRMWARE_MAXSIZE)" -ge "$(shell wc -c < $(FIRMWARE_BUILD_DIR)/firmware.bin)"
else ifeq ($(MCU),$(filter $(MCU),STM32U5))
sizecheck: ## check sizes of binary files
test "$(BOARDLOADER_MAXSIZE)" -ge "$(shell wc -c < $(BOARDLOADER_BUILD_DIR)/boardloader.bin)"
test "$(BOOTLOADER_MAXSIZE)" -ge "$(shell wc -c < $(BOOTLOADER_BUILD_DIR)/bootloader.bin)"
test "$(FIRMWARE_MAXSIZE)" -ge "$(shell wc -c < $(FIRMWARE_BUILD_DIR)/firmware.bin)"
endif
combine: ## combine boardloader + bootloader + prodtest into one combined image
combine_firmware \
$(TREZOR_MODEL) \
$(PRODTEST_BUILD_DIR)/combined.bin \
-b BOARDLOADER $(BOARDLOADER_BUILD_DIR)/boardloader.bin \
-b BOOTLOADER $(BOOTLOADER_BUILD_DIR)/bootloader.bin \
-b FIRMWARE $(PRODTEST_BUILD_DIR)/prodtest.bin
ifeq ($(MCU),$(filter $(MCU),STM32F4))
combine_fw: ## combine boardloader + bootloader + firmware into one combined image
combine_firmware \
$(TREZOR_MODEL) \
$(PRODTEST_BUILD_DIR)/combined.bin \
-b BOARDLOADER $(BOARDLOADER_BUILD_DIR)/boardloader.bin \
-b BOOTLOADER $(BOOTLOADER_BUILD_DIR)/bootloader.bin \
-b FIRMWARE $(FIRMWARE_BUILD_DIR)/firmware.bin.p1 \
-b FIRMWARE_P2 $(FIRMWARE_BUILD_DIR)/firmware.bin.p2
else ifeq ($(MCU),$(filter $(MCU),STM32U5))
combine_fw: ## combine boardloader + bootloader + firmware into one combined image
combine_firmware \
$(TREZOR_MODEL) \
$(PRODTEST_BUILD_DIR)/combined.bin \
-b BOARDLOADER $(BOARDLOADER_BUILD_DIR)/boardloader.bin \
-b BOOTLOADER $(BOOTLOADER_BUILD_DIR)/bootloader.bin \
-b FIRMWARE $(FIRMWARE_BUILD_DIR)/firmware.bin
endif
upload: ## upload firmware using trezorctl
trezorctl firmware_update -s -f $(FIRMWARE_BUILD_DIR)/firmware.bin
upload_prodtest: ## upload prodtest using trezorctl
trezorctl firmware_update -s -f $(PRODTEST_BUILD_DIR)/prodtest.bin
coverage: ## generate coverage report
./tools/coverage-report
unused: ## find unused micropython code
vulture src src/_vulture_ignore.txt --exclude "messages.py,*/enums/*"
.PHONY: templates translations templates_check translations_check