arno/trezor-firmware
1
0
Fork 0
mirror of https://github.com/trezor/trezor-firmware.git synced 2024-12-29 09:38:08 +00:00
Code Issues Releases Wiki Activity
915cf849e9
trezor-firmware/micropython/trezorhal/usbd_core.c
Pavol Rusnak 8a1ec2aad6
trezorhal: upgrade usbd files from stmcube 1.15
2017-04-10 17:52:18 +02:00

566 lines
12 KiB
C
Raw Blame History

/**
******************************************************************************
* @file usbd_core.c
* @author MCD Application Team
* @version V2.4.2
* @date 11-December-2015
* @brief This file provides all the USBD core functions.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "usbd_core.h"
/** @addtogroup STM32_USBD_DEVICE_LIBRARY
* @{
*/
/** @defgroup USBD_CORE
* @brief usbd core module
* @{
*/
/** @defgroup USBD_CORE_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup USBD_CORE_Private_Defines
* @{
*/
/**
* @}
*/
/** @defgroup USBD_CORE_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup USBD_CORE_Private_FunctionPrototypes
* @{
*/
/**
* @}
*/
/** @defgroup USBD_CORE_Private_Variables
* @{
*/
/**
* @}
*/
/** @defgroup USBD_CORE_Private_Functions
* @{
*/
/**
* @brief USBD_Init
* Initializes the device stack and load the class driver
* @param pdev: device instance
* @param pdesc: Descriptor structure address
* @param id: Low level core index
* @retval None
*/
USBD_StatusTypeDef USBD_Init(USBD_HandleTypeDef *pdev, USBD_DescriptorsTypeDef *pdesc, uint8_t id)
{
/* Check whether the USB Host handle is valid */
if(pdev == NULL)
{
USBD_ErrLog("Invalid Device handle");
return USBD_FAIL;
}
/* Unlink previous class*/
if(pdev->pClass != NULL)
{
pdev->pClass = NULL;
}
/* Assign USBD Descriptors */
if(pdesc != NULL)
{
pdev->pDesc = pdesc;
}
/* Set Device initial State */
pdev->dev_state = USBD_STATE_DEFAULT;
pdev->id = id;
/* Initialize low level driver */
USBD_LL_Init(pdev);
return USBD_OK;
}
/**
* @brief USBD_DeInit
* Re-Initialize th device library
* @param pdev: device instance
* @retval status: status
*/
USBD_StatusTypeDef USBD_DeInit(USBD_HandleTypeDef *pdev)
{
/* Set Default State */
pdev->dev_state = USBD_STATE_DEFAULT;
/* Free Class Resources */
pdev->pClass->DeInit(pdev, pdev->dev_config);
/* Stop the low level driver */
USBD_LL_Stop(pdev);
/* Initialize low level driver */
USBD_LL_DeInit(pdev);
return USBD_OK;
}
/**
* @brief USBD_RegisterClass
* Link class driver to Device Core.
* @param pDevice : Device Handle
* @param pclass: Class handle
* @retval USBD Status
*/
USBD_StatusTypeDef USBD_RegisterClass(USBD_HandleTypeDef *pdev, USBD_ClassTypeDef *pclass)
{
USBD_StatusTypeDef status = USBD_OK;
if(pclass != 0)
{
/* link the class to the USB Device handle */
pdev->pClass = pclass;
status = USBD_OK;
}
else
{
USBD_ErrLog("Invalid Class handle");
status = USBD_FAIL;
}
return status;
}
/**
* @brief USBD_Start
* Start the USB Device Core.
* @param pdev: Device Handle
* @retval USBD Status
*/
USBD_StatusTypeDef USBD_Start (USBD_HandleTypeDef *pdev)
{
/* Start the low level driver */
USBD_LL_Start(pdev);
return USBD_OK;
}
/**
* @brief USBD_Stop
* Stop the USB Device Core.
* @param pdev: Device Handle
* @retval USBD Status
*/
USBD_StatusTypeDef USBD_Stop (USBD_HandleTypeDef *pdev)
{
/* Free Class Resources */
pdev->pClass->DeInit(pdev, pdev->dev_config);
/* Stop the low level driver */
USBD_LL_Stop(pdev);
return USBD_OK;
}
/**
* @brief USBD_RunTestMode
* Launch test mode process
* @param pdev: device instance
* @retval status
*/
USBD_StatusTypeDef USBD_RunTestMode (USBD_HandleTypeDef *pdev)
{
return USBD_OK;
}
/**
* @brief USBD_SetClassConfig
* Configure device and start the interface
* @param pdev: device instance
* @param cfgidx: configuration index
* @retval status
*/
USBD_StatusTypeDef USBD_SetClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx)
{
USBD_StatusTypeDef ret = USBD_FAIL;
if(pdev->pClass != NULL)
{
/* Set configuration and Start the Class*/
if(pdev->pClass->Init(pdev, cfgidx) == 0)
{
ret = USBD_OK;
}
}
return ret;
}
/**
* @brief USBD_ClrClassConfig
* Clear current configuration
* @param pdev: device instance
* @param cfgidx: configuration index
* @retval status: USBD_StatusTypeDef
*/
USBD_StatusTypeDef USBD_ClrClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx)
{
/* Clear configuration and De-initialize the Class process*/
pdev->pClass->DeInit(pdev, cfgidx);
return USBD_OK;
}
/**
* @brief USBD_SetupStage
* Handle the setup stage
* @param pdev: device instance
* @retval status
*/
USBD_StatusTypeDef USBD_LL_SetupStage(USBD_HandleTypeDef *pdev, uint8_t *psetup)
{
USBD_ParseSetupRequest(&pdev->request, psetup);
pdev->ep0_state = USBD_EP0_SETUP;
pdev->ep0_data_len = pdev->request.wLength;
switch (pdev->request.bmRequest & 0x1F)
{
case USB_REQ_RECIPIENT_DEVICE:
USBD_StdDevReq (pdev, &pdev->request);
break;
case USB_REQ_RECIPIENT_INTERFACE:
USBD_StdItfReq(pdev, &pdev->request);
break;
case USB_REQ_RECIPIENT_ENDPOINT:
USBD_StdEPReq(pdev, &pdev->request);
break;
default:
USBD_LL_StallEP(pdev , pdev->request.bmRequest & 0x80);
break;
}
return USBD_OK;
}
/**
* @brief USBD_DataOutStage
* Handle data OUT stage
* @param pdev: device instance
* @param epnum: endpoint index
* @retval status
*/
USBD_StatusTypeDef USBD_LL_DataOutStage(USBD_HandleTypeDef *pdev , uint8_t epnum, uint8_t *pdata)
{
USBD_EndpointTypeDef *pep;
if(epnum == 0)
{
pep = &pdev->ep_out[0];
if ( pdev->ep0_state == USBD_EP0_DATA_OUT)
{
if(pep->rem_length > pep->maxpacket)
{
pep->rem_length -= pep->maxpacket;
USBD_CtlContinueRx (pdev,
pdata,
MIN(pep->rem_length ,pep->maxpacket));
}
else
{
if((pdev->pClass->EP0_RxReady != NULL)&&
(pdev->dev_state == USBD_STATE_CONFIGURED))
{
pdev->pClass->EP0_RxReady(pdev);
}
USBD_CtlSendStatus(pdev);
}
}
}
else if((pdev->pClass->DataOut != NULL)&&
(pdev->dev_state == USBD_STATE_CONFIGURED))
{
pdev->pClass->DataOut(pdev, epnum);
}
return USBD_OK;
}
/**
* @brief USBD_DataInStage
* Handle data in stage
* @param pdev: device instance
* @param epnum: endpoint index
* @retval status
*/
USBD_StatusTypeDef USBD_LL_DataInStage(USBD_HandleTypeDef *pdev ,uint8_t epnum, uint8_t *pdata)
{
USBD_EndpointTypeDef *pep;
if(epnum == 0)
{
pep = &pdev->ep_in[0];
if ( pdev->ep0_state == USBD_EP0_DATA_IN)
{
if(pep->rem_length > pep->maxpacket)
{
pep->rem_length -= pep->maxpacket;
USBD_CtlContinueSendData (pdev,
pdata,
pep->rem_length);
/* Prepare endpoint for premature end of transfer */
USBD_LL_PrepareReceive (pdev,
0,
NULL,
0);
}
else
{ /* last packet is MPS multiple, so send ZLP packet */
if((pep->total_length % pep->maxpacket == 0) &&
(pep->total_length >= pep->maxpacket) &&
(pep->total_length < pdev->ep0_data_len ))
{
USBD_CtlContinueSendData(pdev , NULL, 0);
pdev->ep0_data_len = 0;
/* Prepare endpoint for premature end of transfer */
USBD_LL_PrepareReceive (pdev,
0,
NULL,
0);
}
else
{
if((pdev->pClass->EP0_TxSent != NULL)&&
(pdev->dev_state == USBD_STATE_CONFIGURED))
{
pdev->pClass->EP0_TxSent(pdev);
}
USBD_CtlReceiveStatus(pdev);
}
}
}
if (pdev->dev_test_mode == 1)
{
USBD_RunTestMode(pdev);
pdev->dev_test_mode = 0;
}
}
else if((pdev->pClass->DataIn != NULL)&&
(pdev->dev_state == USBD_STATE_CONFIGURED))
{
pdev->pClass->DataIn(pdev, epnum);
}
return USBD_OK;
}
/**
* @brief USBD_LL_Reset
* Handle Reset event
* @param pdev: device instance
* @retval status
*/
USBD_StatusTypeDef USBD_LL_Reset(USBD_HandleTypeDef *pdev)
{
/* Open EP0 OUT */
USBD_LL_OpenEP(pdev,
0x00,
USBD_EP_TYPE_CTRL,
USB_MAX_EP0_SIZE);
pdev->ep_out[0].maxpacket = USB_MAX_EP0_SIZE;
/* Open EP0 IN */
USBD_LL_OpenEP(pdev,
0x80,
USBD_EP_TYPE_CTRL,
USB_MAX_EP0_SIZE);
pdev->ep_in[0].maxpacket = USB_MAX_EP0_SIZE;
/* Upon Reset call user call back */
pdev->dev_state = USBD_STATE_DEFAULT;
if (pdev->pClassData)
pdev->pClass->DeInit(pdev, pdev->dev_config);
return USBD_OK;
}
/**
* @brief USBD_LL_Reset
* Handle Reset event
* @param pdev: device instance
* @retval status
*/
USBD_StatusTypeDef USBD_LL_SetSpeed(USBD_HandleTypeDef *pdev, USBD_SpeedTypeDef speed)
{
pdev->dev_speed = speed;
return USBD_OK;
}
/**
* @brief USBD_Suspend
* Handle Suspend event
* @param pdev: device instance
* @retval status
*/
USBD_StatusTypeDef USBD_LL_Suspend(USBD_HandleTypeDef *pdev)
{
pdev->dev_old_state = pdev->dev_state;
pdev->dev_state = USBD_STATE_SUSPENDED;
return USBD_OK;
}
/**
* @brief USBD_Resume
* Handle Resume event
* @param pdev: device instance
* @retval status
*/
USBD_StatusTypeDef USBD_LL_Resume(USBD_HandleTypeDef *pdev)
{
pdev->dev_state = pdev->dev_old_state;
return USBD_OK;
}
/**
* @brief USBD_SOF
* Handle SOF event
* @param pdev: device instance
* @retval status
*/
USBD_StatusTypeDef USBD_LL_SOF(USBD_HandleTypeDef *pdev)
{
if(pdev->dev_state == USBD_STATE_CONFIGURED)
{
if(pdev->pClass->SOF != NULL)
{
pdev->pClass->SOF(pdev);
}
}
return USBD_OK;
}
/**
* @brief USBD_IsoINIncomplete
* Handle iso in incomplete event
* @param pdev: device instance
* @retval status
*/
USBD_StatusTypeDef USBD_LL_IsoINIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum)
{
return USBD_OK;
}
/**
* @brief USBD_IsoOUTIncomplete
* Handle iso out incomplete event
* @param pdev: device instance
* @retval status
*/
USBD_StatusTypeDef USBD_LL_IsoOUTIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum)
{
return USBD_OK;
}
/**
* @brief USBD_DevConnected
* Handle device connection event
* @param pdev: device instance
* @retval status
*/
USBD_StatusTypeDef USBD_LL_DevConnected(USBD_HandleTypeDef *pdev)
{
return USBD_OK;
}
/**
* @brief USBD_DevDisconnected
* Handle device disconnection event
* @param pdev: device instance
* @retval status
*/
USBD_StatusTypeDef USBD_LL_DevDisconnected(USBD_HandleTypeDef *pdev)
{
/* Free Class Resources */
pdev->dev_state = USBD_STATE_DEFAULT;
pdev->pClass->DeInit(pdev, pdev->dev_config);
return USBD_OK;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
Reference in New Issue View Git Blame Copy Permalink