mirror of
https://github.com/trezor/trezor-firmware.git
synced 2024-11-12 10:39:00 +00:00
115 lines
3.8 KiB
C
115 lines
3.8 KiB
C
#ifdef SYSTEM_VIEW
|
|
|
|
#include "systemview.h"
|
|
#include <stddef.h>
|
|
#include <stdint.h>
|
|
#include <string.h>
|
|
#include "irq.h"
|
|
#include "mpconfigport.h"
|
|
#include "supervise.h"
|
|
|
|
#include "SEGGER_SYSVIEW.h"
|
|
#include "SEGGER_SYSVIEW_Conf.h"
|
|
|
|
#define SYSTICK ((SYSTICK_REGS *)0xE000E010)
|
|
#define SCS ((SCS_REGS *)0xE000ED00)
|
|
|
|
// for storing DWT CYCCNT from SVC call
|
|
volatile uint32_t cyccnt_cycles;
|
|
|
|
typedef struct {
|
|
volatile unsigned int CSR;
|
|
volatile unsigned int RVR;
|
|
volatile unsigned int CVR;
|
|
volatile unsigned int CALIB;
|
|
} SYSTICK_REGS;
|
|
|
|
typedef struct {
|
|
volatile unsigned int CPUID; // CPUID Base Register
|
|
volatile unsigned int ICSR; // Interrupt Control and State Register
|
|
volatile unsigned int VTOR; // Vector Table Offset Register
|
|
volatile unsigned int
|
|
AIRCR; // Application Interrupt and Reset Control Register
|
|
volatile unsigned int SCR; // System Control Register
|
|
volatile unsigned int CCR; // Configuration and Control Register
|
|
volatile unsigned int SHPR1; // System Handler Priority Register 1
|
|
volatile unsigned int SHPR2; // System Handler Priority Register 2
|
|
volatile unsigned int SHPR3; // System Handler Priority Register 3
|
|
volatile unsigned int SHCSR; // System Handler Control and State Register
|
|
volatile unsigned int CFSR; // Configurable Fault Status Register
|
|
volatile unsigned int HFSR; // HardFault Status Register
|
|
volatile unsigned int DFSR; // Debug Fault Status Register
|
|
volatile unsigned int MMFAR; // MemManage Fault Address Register
|
|
volatile unsigned int BFAR; // BusFault Address Register
|
|
volatile unsigned int AFSR; // Auxiliary Fault Status Register
|
|
volatile unsigned int aDummy0[4]; // 0x40-0x4C Reserved
|
|
volatile unsigned int aDummy1[4]; // 0x50-0x5C Reserved
|
|
volatile unsigned int aDummy2[4]; // 0x60-0x6C Reserved
|
|
volatile unsigned int aDummy3[4]; // 0x70-0x7C Reserved
|
|
volatile unsigned int aDummy4[2]; // 0x80-0x87 - - - Reserved.
|
|
volatile unsigned int CPACR; // Coprocessor Access Control Register
|
|
} SCS_REGS;
|
|
|
|
extern uint32_t SystemCoreClock;
|
|
|
|
uint32_t svc_get_dwt_cyccnt() {
|
|
if (is_mode_unprivileged()) {
|
|
__asm__ __volatile__("svc %0" ::"i"(SVC_GET_DWT_CYCCNT));
|
|
} else {
|
|
cyccnt_cycles = *DWT_CYCCNT_ADDR;
|
|
}
|
|
return cyccnt_cycles;
|
|
}
|
|
|
|
U32 SEGGER_SYSVIEW_X_GetInterruptId() {
|
|
return ((*(U32 *)(0xE000ED04)) & 0x1FF);
|
|
}
|
|
|
|
void enable_systemview() {
|
|
SEGGER_SYSVIEW_Conf();
|
|
SEGGER_SYSVIEW_Start();
|
|
|
|
U32 v;
|
|
//
|
|
// Configure SysTick and debug monitor interrupt priorities
|
|
// Low value means high priority
|
|
// A maximum of 8 priority bits and a minimum of 3 bits is implemented per
|
|
// interrupt. How many bits are implemented depends on the actual CPU being
|
|
// used If less than 8 bits are supported, the lower bits of the priority byte
|
|
// are RAZ. In order to make sure that priority of monitor and SysTick always
|
|
// differ, please make sure that the difference is visible in the highest 3
|
|
// bits
|
|
v = SCS->SHPR3;
|
|
v |= (0xFFuL << 24); // Lowest prio for SysTick so SystemView does not get
|
|
// interrupted by Systick
|
|
SCS->SHPR3 = v;
|
|
//
|
|
// Configure SysTick interrupt
|
|
// SysTick is running at CPU speed
|
|
// Configure SysTick to fire every ms
|
|
//
|
|
SYSTICK->RVR = (SystemCoreClock / 1000) - 1; // set reload
|
|
SYSTICK->CVR = 0x00; // set counter
|
|
SYSTICK->CSR = 0x07; // enable systick
|
|
}
|
|
|
|
#ifdef SYSTEMVIEW_DEST_RTT
|
|
size_t _write(int file, const void *ptr, size_t len);
|
|
#endif
|
|
|
|
size_t segger_print(const char *str, size_t len) {
|
|
#ifdef SYSTEMVIEW_DEST_SYSTEMVIEW
|
|
static char str_copy[1024];
|
|
size_t copylen = len > 1023 ? 1023 : len;
|
|
memcpy(str_copy, str, copylen);
|
|
str_copy[copylen] = 0;
|
|
SEGGER_SYSVIEW_Print(str_copy);
|
|
return len;
|
|
#endif
|
|
#ifdef SYSTEMVIEW_DEST_RTT
|
|
_write(0, str, len);
|
|
return len;
|
|
#endif
|
|
}
|
|
#endif
|