mirror of
https://github.com/trezor/trezor-firmware.git
synced 2024-11-18 05:28:40 +00:00
284 lines
11 KiB
C
284 lines
11 KiB
C
/*
|
|
* This file is part of the Trezor project, https://trezor.io/
|
|
*
|
|
* Copyright (C) 2014 Pavol Rusnak <stick@satoshilabs.com>
|
|
*
|
|
* This library is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU Lesser General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU Lesser General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU Lesser General Public License
|
|
* along with this library. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <libopencm3/cm3/mpu.h>
|
|
#include <libopencm3/cm3/nvic.h>
|
|
#include <libopencm3/cm3/scb.h>
|
|
#include <libopencm3/stm32/gpio.h>
|
|
#include <libopencm3/stm32/rcc.h>
|
|
#include <libopencm3/stm32/rng.h>
|
|
#include <libopencm3/stm32/spi.h>
|
|
|
|
#include "layout.h"
|
|
#include "rng.h"
|
|
#include "util.h"
|
|
|
|
uint32_t __stack_chk_guard;
|
|
|
|
static inline void __attribute__((noreturn)) fault_handler(const char *line1) {
|
|
layoutDialog(&bmp_icon_error, NULL, NULL, NULL, line1, "detected.", NULL,
|
|
"Please unplug", "the device.", NULL);
|
|
shutdown();
|
|
}
|
|
|
|
void __attribute__((noreturn)) __stack_chk_fail(void) {
|
|
fault_handler("Stack smashing");
|
|
}
|
|
|
|
void nmi_handler(void) {
|
|
// Clock Security System triggered NMI
|
|
if ((RCC_CIR & RCC_CIR_CSSF) != 0) {
|
|
fault_handler("Clock instability");
|
|
}
|
|
}
|
|
|
|
void hard_fault_handler(void) { fault_handler("Hard fault"); }
|
|
|
|
void mem_manage_handler(void) { fault_handler("Memory fault"); }
|
|
|
|
void setup(void) {
|
|
// set SCB_CCR STKALIGN bit to make sure 8-byte stack alignment on exception
|
|
// entry is in effect. This is not strictly necessary for the current Trezor
|
|
// system. This is here to comply with guidance from section 3.3.3 "Binary
|
|
// compatibility with other Cortex processors" of the ARM Cortex-M3 Processor
|
|
// Technical Reference Manual. According to section 4.4.2 and 4.4.7 of the
|
|
// "STM32F10xxx/20xxx/21xxx/L1xxxx Cortex-M3 programming manual", STM32F2
|
|
// series MCUs are r2p0 and always have this bit set on reset already.
|
|
SCB_CCR |= SCB_CCR_STKALIGN;
|
|
|
|
// setup clock
|
|
struct rcc_clock_scale clock = rcc_hse_8mhz_3v3[RCC_CLOCK_3V3_120MHZ];
|
|
rcc_clock_setup_hse_3v3(&clock);
|
|
|
|
// enable GPIO clock - A (oled), B(oled), C (buttons)
|
|
rcc_periph_clock_enable(RCC_GPIOA);
|
|
rcc_periph_clock_enable(RCC_GPIOB);
|
|
rcc_periph_clock_enable(RCC_GPIOC);
|
|
|
|
// enable SPI clock
|
|
rcc_periph_clock_enable(RCC_SPI1);
|
|
|
|
// enable RNG
|
|
rcc_periph_clock_enable(RCC_RNG);
|
|
RNG_CR |= RNG_CR_RNGEN;
|
|
// to be extra careful and heed the STM32F205xx Reference manual,
|
|
// Section 20.3.1 we don't use the first random number generated after setting
|
|
// the RNGEN bit in setup
|
|
random32();
|
|
|
|
// enable CSS (Clock Security System)
|
|
RCC_CR |= RCC_CR_CSSON;
|
|
|
|
// set GPIO for buttons
|
|
gpio_mode_setup(GPIOC, GPIO_MODE_INPUT, GPIO_PUPD_PULLUP, GPIO2 | GPIO5);
|
|
|
|
// set GPIO for OLED display
|
|
gpio_mode_setup(GPIOA, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, GPIO4);
|
|
gpio_mode_setup(GPIOB, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, GPIO0 | GPIO1);
|
|
|
|
// enable SPI 1 for OLED display
|
|
gpio_mode_setup(GPIOA, GPIO_MODE_AF, GPIO_PUPD_NONE, GPIO5 | GPIO7);
|
|
gpio_set_af(GPIOA, GPIO_AF5, GPIO5 | GPIO7);
|
|
|
|
// spi_disable_crc(SPI1);
|
|
spi_init_master(
|
|
SPI1, SPI_CR1_BAUDRATE_FPCLK_DIV_8, SPI_CR1_CPOL_CLK_TO_0_WHEN_IDLE,
|
|
SPI_CR1_CPHA_CLK_TRANSITION_1, SPI_CR1_DFF_8BIT, SPI_CR1_MSBFIRST);
|
|
spi_enable_ss_output(SPI1);
|
|
// spi_enable_software_slave_management(SPI1);
|
|
// spi_set_nss_high(SPI1);
|
|
// spi_clear_mode_fault(SPI1);
|
|
spi_enable(SPI1);
|
|
|
|
// enable OTG_FS
|
|
gpio_mode_setup(GPIOA, GPIO_MODE_AF, GPIO_PUPD_PULLUP, GPIO10);
|
|
gpio_mode_setup(GPIOA, GPIO_MODE_AF, GPIO_PUPD_NONE, GPIO11 | GPIO12);
|
|
gpio_set_af(GPIOA, GPIO_AF10, GPIO10 | GPIO11 | GPIO12);
|
|
|
|
// enable OTG FS clock
|
|
rcc_periph_clock_enable(RCC_OTGFS);
|
|
// clear USB OTG_FS peripheral dedicated RAM
|
|
memset_reg((void *)0x50020000, (void *)0x50020500, 0);
|
|
}
|
|
|
|
void setupApp(void) {
|
|
// for completeness, disable RNG peripheral interrupts for old bootloaders
|
|
// that had enabled them in RNG control register (the RNG interrupt was never
|
|
// enabled in the NVIC)
|
|
RNG_CR &= ~RNG_CR_IE;
|
|
// the static variables in random32 are separate between the bootloader and
|
|
// firmware. therefore, they need to be initialized here so that we can be
|
|
// sure to avoid dupes. this is to try to comply with STM32F205xx Reference
|
|
// manual - Section 20.3.1: "Each subsequent generated random number has to be
|
|
// compared with the previously generated number. The test fails if any two
|
|
// compared numbers are equal (continuous random number generator test)."
|
|
random32();
|
|
|
|
// enable CSS (Clock Security System)
|
|
RCC_CR |= RCC_CR_CSSON;
|
|
|
|
// hotfix for old bootloader
|
|
gpio_mode_setup(GPIOA, GPIO_MODE_INPUT, GPIO_PUPD_NONE, GPIO9);
|
|
spi_init_master(
|
|
SPI1, SPI_CR1_BAUDRATE_FPCLK_DIV_8, SPI_CR1_CPOL_CLK_TO_0_WHEN_IDLE,
|
|
SPI_CR1_CPHA_CLK_TRANSITION_1, SPI_CR1_DFF_8BIT, SPI_CR1_MSBFIRST);
|
|
|
|
gpio_mode_setup(GPIOA, GPIO_MODE_AF, GPIO_PUPD_PULLUP, GPIO10);
|
|
gpio_set_af(GPIOA, GPIO_AF10, GPIO10);
|
|
}
|
|
|
|
#define MPU_RASR_SIZE_32B (0x04UL << MPU_RASR_SIZE_LSB)
|
|
#define MPU_RASR_SIZE_1KB (0x09UL << MPU_RASR_SIZE_LSB)
|
|
#define MPU_RASR_SIZE_4KB (0x0BUL << MPU_RASR_SIZE_LSB)
|
|
#define MPU_RASR_SIZE_8KB (0x0CUL << MPU_RASR_SIZE_LSB)
|
|
#define MPU_RASR_SIZE_16KB (0x0DUL << MPU_RASR_SIZE_LSB)
|
|
#define MPU_RASR_SIZE_32KB (0x0EUL << MPU_RASR_SIZE_LSB)
|
|
#define MPU_RASR_SIZE_64KB (0x0FUL << MPU_RASR_SIZE_LSB)
|
|
#define MPU_RASR_SIZE_128KB (0x10UL << MPU_RASR_SIZE_LSB)
|
|
#define MPU_RASR_SIZE_256KB (0x11UL << MPU_RASR_SIZE_LSB)
|
|
#define MPU_RASR_SIZE_512KB (0x12UL << MPU_RASR_SIZE_LSB)
|
|
#define MPU_RASR_SIZE_1MB (0x13UL << MPU_RASR_SIZE_LSB)
|
|
#define MPU_RASR_SIZE_512MB (0x1CUL << MPU_RASR_SIZE_LSB)
|
|
#define MPU_RASR_SIZE_4GB (0x1FUL << MPU_RASR_SIZE_LSB)
|
|
|
|
// http://infocenter.arm.com/help/topic/com.arm.doc.dui0552a/BABDJJGF.html
|
|
#define MPU_RASR_ATTR_FLASH (MPU_RASR_ATTR_C)
|
|
#define MPU_RASR_ATTR_SRAM (MPU_RASR_ATTR_C | MPU_RASR_ATTR_S)
|
|
#define MPU_RASR_ATTR_PERIPH (MPU_RASR_ATTR_B | MPU_RASR_ATTR_S)
|
|
|
|
#define FLASH_BASE (0x08000000U)
|
|
#define SRAM_BASE (0x20000000U)
|
|
|
|
void mpu_config_off(void) {
|
|
// Disable MPU
|
|
MPU_CTRL = 0;
|
|
|
|
__asm__ volatile("dsb");
|
|
__asm__ volatile("isb");
|
|
}
|
|
|
|
void mpu_config_bootloader(void) {
|
|
// Disable MPU
|
|
MPU_CTRL = 0;
|
|
|
|
// Note: later entries overwrite previous ones
|
|
|
|
// Everything (0x00000000 - 0xFFFFFFFF, 4 GiB, read-write)
|
|
MPU_RBAR = 0 | MPU_RBAR_VALID | (0 << MPU_RBAR_REGION_LSB);
|
|
MPU_RASR = MPU_RASR_ENABLE | MPU_RASR_ATTR_FLASH | MPU_RASR_SIZE_4GB |
|
|
MPU_RASR_ATTR_AP_PRW_URW;
|
|
|
|
// Flash (0x8007FE0 - 0x08007FFF, 32 B, no-access)
|
|
MPU_RBAR =
|
|
(FLASH_BASE + 0x7FE0) | MPU_RBAR_VALID | (1 << MPU_RBAR_REGION_LSB);
|
|
MPU_RASR = MPU_RASR_ENABLE | MPU_RASR_ATTR_FLASH | MPU_RASR_SIZE_32B |
|
|
MPU_RASR_ATTR_AP_PNO_UNO;
|
|
|
|
// SRAM (0x20000000 - 0x2001FFFF, read-write, execute never)
|
|
MPU_RBAR = SRAM_BASE | MPU_RBAR_VALID | (2 << MPU_RBAR_REGION_LSB);
|
|
MPU_RASR = MPU_RASR_ENABLE | MPU_RASR_ATTR_SRAM | MPU_RASR_SIZE_128KB |
|
|
MPU_RASR_ATTR_AP_PRW_URW | MPU_RASR_ATTR_XN;
|
|
|
|
// Peripherals (0x40000000 - 0x4001FFFF, read-write, execute never)
|
|
MPU_RBAR = PERIPH_BASE | MPU_RBAR_VALID | (3 << MPU_RBAR_REGION_LSB);
|
|
MPU_RASR = MPU_RASR_ENABLE | MPU_RASR_ATTR_PERIPH | MPU_RASR_SIZE_128KB |
|
|
MPU_RASR_ATTR_AP_PRW_URW | MPU_RASR_ATTR_XN;
|
|
// Peripherals (0x40020000 - 0x40023FFF, read-write, execute never)
|
|
MPU_RBAR = 0x40020000 | MPU_RBAR_VALID | (4 << MPU_RBAR_REGION_LSB);
|
|
MPU_RASR = MPU_RASR_ENABLE | MPU_RASR_ATTR_PERIPH | MPU_RASR_SIZE_16KB |
|
|
MPU_RASR_ATTR_AP_PRW_URW | MPU_RASR_ATTR_XN;
|
|
// Don't enable DMA controller access
|
|
// Peripherals (0x50000000 - 0x5007ffff, read-write, execute never)
|
|
MPU_RBAR = 0x50000000 | MPU_RBAR_VALID | (5 << MPU_RBAR_REGION_LSB);
|
|
MPU_RASR = MPU_RASR_ENABLE | MPU_RASR_ATTR_PERIPH | MPU_RASR_SIZE_512KB |
|
|
MPU_RASR_ATTR_AP_PRW_URW | MPU_RASR_ATTR_XN;
|
|
|
|
// Enable MPU
|
|
MPU_CTRL = MPU_CTRL_ENABLE | MPU_CTRL_HFNMIENA;
|
|
|
|
// Enable memory fault handler
|
|
SCB_SHCSR |= SCB_SHCSR_MEMFAULTENA;
|
|
|
|
__asm__ volatile("dsb");
|
|
__asm__ volatile("isb");
|
|
}
|
|
|
|
// Never use in bootloader! Disables access to PPB (including MPU, NVIC, SCB)
|
|
void mpu_config_firmware(void) {
|
|
#if MEMORY_PROTECT
|
|
// Disable MPU
|
|
MPU_CTRL = 0;
|
|
|
|
// Note: later entries overwrite previous ones
|
|
|
|
// Flash (0x08000000 - 0x0807FFFF, 1 MiB, read-only)
|
|
MPU_RBAR = FLASH_BASE | MPU_RBAR_VALID | (0 << MPU_RBAR_REGION_LSB);
|
|
MPU_RASR = MPU_RASR_ENABLE | MPU_RASR_ATTR_FLASH | MPU_RASR_SIZE_1MB |
|
|
MPU_RASR_ATTR_AP_PRO_URO;
|
|
|
|
// Metadata in Flash is read-write when unlocked
|
|
// (0x08008000 - 0x0800FFFF, 32 KiB, read-write, execute never)
|
|
MPU_RBAR =
|
|
(FLASH_BASE + 0x8000) | MPU_RBAR_VALID | (1 << MPU_RBAR_REGION_LSB);
|
|
MPU_RASR = MPU_RASR_ENABLE | MPU_RASR_ATTR_FLASH | MPU_RASR_SIZE_32KB |
|
|
MPU_RASR_ATTR_AP_PRW_URW | MPU_RASR_ATTR_XN;
|
|
|
|
// SRAM (0x20000000 - 0x2001FFFF, read-write, execute never)
|
|
MPU_RBAR = SRAM_BASE | MPU_RBAR_VALID | (2 << MPU_RBAR_REGION_LSB);
|
|
MPU_RASR = MPU_RASR_ENABLE | MPU_RASR_ATTR_SRAM | MPU_RASR_SIZE_128KB |
|
|
MPU_RASR_ATTR_AP_PRW_URW | MPU_RASR_ATTR_XN;
|
|
|
|
// Peripherals (0x40000000 - 0x4001FFFF, read-write, execute never)
|
|
MPU_RBAR = PERIPH_BASE | MPU_RBAR_VALID | (3 << MPU_RBAR_REGION_LSB);
|
|
MPU_RASR = MPU_RASR_ENABLE | MPU_RASR_ATTR_PERIPH | MPU_RASR_SIZE_128KB |
|
|
MPU_RASR_ATTR_AP_PRW_URW | MPU_RASR_ATTR_XN;
|
|
// Peripherals (0x40020000 - 0x40023FFF, read-write, execute never)
|
|
MPU_RBAR = 0x40020000 | MPU_RBAR_VALID | (4 << MPU_RBAR_REGION_LSB);
|
|
MPU_RASR = MPU_RASR_ENABLE | MPU_RASR_ATTR_PERIPH | MPU_RASR_SIZE_16KB |
|
|
MPU_RASR_ATTR_AP_PRW_URW | MPU_RASR_ATTR_XN;
|
|
// Flash controller is protected
|
|
// (0x40023C00 - 0x40023FFF, privileged read-write, user no, execute never)
|
|
MPU_RBAR = 0x40023c00 | MPU_RBAR_VALID | (5 << MPU_RBAR_REGION_LSB);
|
|
MPU_RASR = MPU_RASR_ENABLE | MPU_RASR_ATTR_PERIPH | MPU_RASR_SIZE_1KB |
|
|
MPU_RASR_ATTR_AP_PRW_UNO | MPU_RASR_ATTR_XN;
|
|
// Don't enable DMA controller access
|
|
// Peripherals (0x50000000 - 0x5007ffff, read-write, execute never)
|
|
MPU_RBAR = 0x50000000 | MPU_RBAR_VALID | (6 << MPU_RBAR_REGION_LSB);
|
|
MPU_RASR = MPU_RASR_ENABLE | MPU_RASR_ATTR_PERIPH | MPU_RASR_SIZE_512KB |
|
|
MPU_RASR_ATTR_AP_PRW_URW | MPU_RASR_ATTR_XN;
|
|
// SYSCFG_* registers are disabled
|
|
// (0x40013800 - 0x40013BFF, read-only, execute never)
|
|
MPU_RBAR = 0x40013800 | MPU_RBAR_VALID | (7 << MPU_RBAR_REGION_LSB);
|
|
MPU_RASR = MPU_RASR_ENABLE | MPU_RASR_ATTR_PERIPH | MPU_RASR_SIZE_1KB |
|
|
MPU_RASR_ATTR_AP_PRO_URO | MPU_RASR_ATTR_XN;
|
|
|
|
// Enable MPU
|
|
MPU_CTRL = MPU_CTRL_ENABLE | MPU_CTRL_HFNMIENA;
|
|
|
|
// Enable memory fault handler
|
|
SCB_SHCSR |= SCB_SHCSR_MEMFAULTENA;
|
|
|
|
__asm__ volatile("dsb");
|
|
__asm__ volatile("isb");
|
|
|
|
// Switch to unprivileged software execution to prevent access to MPU
|
|
set_mode_unprivileged();
|
|
#endif
|
|
}
|