1
0
mirror of https://github.com/trezor/trezor-firmware.git synced 2024-12-17 11:58:13 +00:00
trezor-firmware/protob/messages-monero.proto

414 lines
12 KiB
Protocol Buffer

syntax = "proto2";
package hw.trezor.messages.monero;
// Sugar for easier handling in Java
option java_package = "com.satoshilabs.trezor.lib.protobuf";
option java_outer_classname = "TrezorMessageMonero";
/**
* Structure representing Monero transaction source entry, UTXO
* @embed
*/
message MoneroTransactionSourceEntry {
repeated MoneroOutputEntry outputs = 1; // all outputs including decoys (forms the ring)
optional uint64 real_output = 2; // index denoting which item in `outputs` is our real output (not a decoy)
optional bytes real_out_tx_key = 3; // tx key located in the real output's tx
repeated bytes real_out_additional_tx_keys = 4; // additional tx keys if applicable
optional uint64 real_output_in_tx_index = 5; // index of our real output in the tx (aka which output was it in the transaction)
optional uint64 amount = 6;
optional bool rct = 7; // is RingCT used (true for newer UTXOs)
optional bytes mask = 8;
optional MoneroMultisigKLRki multisig_kLRki = 9;
message MoneroOutputEntry {
optional uint64 idx = 1;
optional MoneroRctKeyPublic key = 2;
message MoneroRctKeyPublic {
optional bytes dest = 1;
optional bytes commitment = 2;
}
}
message MoneroMultisigKLRki {
optional bytes K = 1;
optional bytes L = 2;
optional bytes R = 3;
optional bytes ki = 4;
}
}
/**
* Structure representing Monero transaction destination entry
* @embed
*/
message MoneroTransactionDestinationEntry {
optional uint64 amount = 1;
optional MoneroAccountPublicAddress addr = 2;
optional bool is_subaddress = 3;
/**
* Structure representing Monero public address
*/
message MoneroAccountPublicAddress {
optional bytes spend_public_key = 1;
optional bytes view_public_key = 2;
}
}
/**
* Range sig parameters / data.
* @embed
*/
message MoneroTransactionRsigData {
optional uint32 rsig_type = 1; // range signature (aka proof) type
optional uint32 offload_type = 2;
repeated uint64 grouping = 3; // aggregation scheme for BP
optional bytes mask = 4; // mask vector
optional bytes rsig = 5; // range sig data, all of it or partial (based on rsig_parts)
repeated bytes rsig_parts = 6;
}
/**
* Request: Ask device for public address derived from seed and address_n
* @start
* @next MoneroAddress
* @next Failure
*/
message MoneroGetAddress {
repeated uint32 address_n = 1; // BIP-32 path to derive the key from master node
optional bool show_display = 2; // Optionally show on display before sending the result
optional uint32 network_type = 3; // Main-net / testnet / stagenet
optional uint32 account = 4; // Major subaddr index
optional uint32 minor = 5; // Minor subaddr index
}
/**
* Response: Contains Monero watch-only credentials derived from device private seed
* @end
*/
message MoneroAddress {
optional bytes address = 1;
}
/**
* Request: Ask device for watch only credentials
* @start
* @next MoneroWatchKey
* @next Failure
*/
message MoneroGetWatchKey {
repeated uint32 address_n = 1; // BIP-32 path to derive the key from master node
optional uint32 network_type = 2; // Main-net / testnet / stagenet
}
/**
* Response: Contains Monero watch-only credentials derived from device private seed
* @end
*/
message MoneroWatchKey {
optional bytes watch_key = 1;
optional bytes address = 2;
}
/**
* Request: Sub request of MoneroTransactionSign. Initializes transaction signing.
* @start
* @next MoneroTransactionInitAck
*/
message MoneroTransactionInitRequest {
optional uint32 version = 1;
repeated uint32 address_n = 2;
optional uint32 network_type = 3; // Main-net / testnet / stagenet
optional MoneroTransactionData tsx_data = 4;
/**
* Structure representing Monero initial transaction information
*/
message MoneroTransactionData {
optional uint32 version = 1;
optional bytes payment_id = 2;
optional uint64 unlock_time = 3;
repeated MoneroTransactionDestinationEntry outputs = 4;
optional MoneroTransactionDestinationEntry change_dts = 5;
optional uint32 num_inputs = 6;
optional uint32 mixin = 7;
optional uint64 fee = 8;
optional uint32 account = 9;
repeated uint32 minor_indices = 10;
optional MoneroTransactionRsigData rsig_data = 11;
repeated uint32 integrated_indices = 12;
}
}
/**
* Response: Response to transaction signing initialization.
* @next MoneroTransactionSetInputRequest
*/
message MoneroTransactionInitAck {
repeated bytes hmacs = 1;
optional MoneroTransactionRsigData rsig_data = 2;
}
/**
* Request: Sub request of MoneroTransactionSign. Sends one UTXO to device
* @next MoneroTransactionSetInputAck
*/
message MoneroTransactionSetInputRequest {
optional MoneroTransactionSourceEntry src_entr = 1;
}
/**
* Response: Response to setting UTXO for signature. Contains sealed values needed for further protocol steps.
* @next MoneroTransactionSetInputAck
* @next MoneroTransactionInputsPermutationRequest
*/
message MoneroTransactionSetInputAck {
optional bytes vini = 1; // xmrtypes.TxinToKey
optional bytes vini_hmac = 2;
optional bytes pseudo_out = 3;
optional bytes pseudo_out_hmac = 4;
optional bytes pseudo_out_alpha = 5;
optional bytes spend_key = 6;
}
/**
* Request: Sub request of MoneroTransactionSign. Permutation on key images.
* @next MoneroTransactionInputsPermutationAck
*/
message MoneroTransactionInputsPermutationRequest {
repeated uint32 perm = 1;
}
/**
* Response: Response to setting permutation on key images
* @next MoneroTransactionInputViniRequest
*/
message MoneroTransactionInputsPermutationAck {
}
/**
* Request: Sub request of MoneroTransactionSign. Sends one UTXO to device together with sealed values.
* @next MoneroTransactionInputViniAck
*/
message MoneroTransactionInputViniRequest {
optional MoneroTransactionSourceEntry src_entr = 1;
optional bytes vini = 2; // xmrtypes.TxinToKey
optional bytes vini_hmac = 3;
optional bytes pseudo_out = 4;
optional bytes pseudo_out_hmac = 5;
}
/**
* Response: Response to setting UTXO to the device
* @next MoneroTransactionInputViniRequest
* @next MoneroTransactionAllInputsSetRequest
*/
message MoneroTransactionInputViniAck {
}
/**
* Request: Sub request of MoneroTransactionSign. Sent after all inputs have been sent. Useful for rangeisg offloading.
* @next MoneroTransactionAllInputsSetAck
*/
message MoneroTransactionAllInputsSetRequest {
}
/**
* Response: Response to after all inputs have been set.
* @next MoneroTransactionSetOutputRequest
*/
message MoneroTransactionAllInputsSetAck {
optional MoneroTransactionRsigData rsig_data = 1;
}
/**
* Request: Sub request of MoneroTransactionSign. Sends one transaction destination to device (HMACed)
* @next MoneroTransactionSetOutputAck
*/
message MoneroTransactionSetOutputRequest {
optional MoneroTransactionDestinationEntry dst_entr = 1;
optional bytes dst_entr_hmac = 2;
optional MoneroTransactionRsigData rsig_data = 3;
}
/**
* Response: Response to setting transaction destination. Contains sealed values needed for further protocol steps.
* @next MoneroTransactionSetOutputRequest
* @next MoneroTransactionAllOutSetRequest
*/
message MoneroTransactionSetOutputAck {
optional bytes tx_out = 1; // xmrtypes.TxOut
optional bytes vouti_hmac = 2;
optional MoneroTransactionRsigData rsig_data = 3;
optional bytes out_pk = 4;
optional bytes ecdh_info = 5;
}
/**
* Request: Sub request of MoneroTransactionSign. Sent after all outputs are sent.
* @next MoneroTransactionAllOutSetAck
*/
message MoneroTransactionAllOutSetRequest {
optional MoneroTransactionRsigData rsig_data = 1;
}
/**
* Response: After all outputs are sent the initial RCT signature fields are sent.
* @next MoneroTransactionSignInputRequest
*/
message MoneroTransactionAllOutSetAck {
optional bytes extra = 1;
optional bytes tx_prefix_hash = 2;
optional MoneroRingCtSig rv = 4; // xmrtypes.RctSig
optional bytes full_message_hash = 5;
/*
* Structure represents initial fields of the Monero RCT signature
*/
message MoneroRingCtSig {
optional uint64 txn_fee = 1;
optional bytes message = 2;
optional uint32 rv_type = 3;
}
}
/**
* Request: Sub request of MoneroTransactionSign. Sends UTXO for the signing.
* @next MoneroTransactionSignInputAck
*/
message MoneroTransactionSignInputRequest {
optional MoneroTransactionSourceEntry src_entr = 1;
optional bytes vini = 2; // xmrtypes.TxinToKey
optional bytes vini_hmac = 3;
optional bytes pseudo_out = 4;
optional bytes pseudo_out_hmac = 5;
optional bytes pseudo_out_alpha = 6;
optional bytes spend_key = 7;
}
/**
* Response: Contains full MG signature of the UTXO + multisig data if applicable.
* @next MoneroTransactionSignInputRequest
* @next MoneroTransactionFinalRequest
*/
message MoneroTransactionSignInputAck {
optional bytes signature = 1;
}
/**
* Request: Sub request of MoneroTransactionSign. Final message of the procol after all UTXOs are signed
* @next MoneroTransactionFinalAck
*/
message MoneroTransactionFinalRequest {
}
/**
* Response: Contains transaction metadata and encryption keys needed for further transaction operations (e.g. multisig, send proof).
* @end
*/
message MoneroTransactionFinalAck {
optional bytes cout_key = 1;
optional bytes salt = 2;
optional bytes rand_mult = 3;
optional bytes tx_enc_keys = 4;
}
/**
* Request: Sub request of MoneroKeyImageSync. Initializing key image sync.
* @start
* @next MoneroKeyImageExportInitAck
*/
message MoneroKeyImageExportInitRequest {
optional uint64 num = 1;
optional bytes hash = 2;
repeated uint32 address_n = 3; // BIP-32 path to derive the key from master node
optional uint32 network_type = 4; // Main-net / testnet / stagenet
repeated MoneroSubAddressIndicesList subs = 5;
/**
* Structure representing Monero list of sub-addresses
*/
message MoneroSubAddressIndicesList {
optional uint32 account = 1;
repeated uint32 minor_indices = 2;
}
}
/**
* Response: Response to key image sync initialization.
* @next MoneroKeyImageSyncStepRequest
*/
message MoneroKeyImageExportInitAck {
}
/**
* Request: Sub request of MoneroKeyImageSync. Contains batch of the UTXO to export key image for.
* @next MoneroKeyImageSyncStepAck
*/
message MoneroKeyImageSyncStepRequest {
repeated MoneroTransferDetails tdis = 1;
/**
* Structure representing Monero UTXO for key image sync
*/
message MoneroTransferDetails {
optional bytes out_key = 1;
optional bytes tx_pub_key = 2;
repeated bytes additional_tx_pub_keys = 3;
optional uint64 internal_output_index = 4;
}
}
/**
* Response: Response to key image sync step. Contains encrypted exported key image.
* @next MoneroKeyImageSyncStepRequest
* @next MoneroKeyImageSyncFinalRequest
*/
message MoneroKeyImageSyncStepAck {
repeated MoneroExportedKeyImage kis = 1;
/**
* Structure representing Monero encrypted exported key image
*/
message MoneroExportedKeyImage {
optional bytes iv = 1;
optional bytes blob = 3;
}
}
/**
* Request: Sub request of MoneroKeyImageSync. Final message of the sync protocol.
* @next MoneroKeyImageSyncFinalAck
*/
message MoneroKeyImageSyncFinalRequest {
}
/**
* Response: Response to key image sync step. Contains encryption keys for exported key images.
* @end
*/
message MoneroKeyImageSyncFinalAck {
optional bytes enc_key = 1;
}
/**
* Request: Universal Monero protocol implementation diagnosis request.
* @start
* @next DebugMoneroDiagAck
*/
message DebugMoneroDiagRequest {
optional uint64 ins = 1;
optional uint64 p1 = 2;
optional uint64 p2 = 3;
repeated uint64 pd = 4;
optional bytes data1 = 5;
optional bytes data2 = 6;
}
/**
* Response: Response to Monero diagnosis protocol.
* @end
*/
message DebugMoneroDiagAck {
optional uint64 ins = 1;
optional uint64 p1 = 2;
optional uint64 p2 = 3;
repeated uint64 pd = 4;
optional bytes data1 = 5;
optional bytes data2 = 6;
}