1
0
mirror of https://github.com/trezor/trezor-firmware.git synced 2024-12-22 22:38:08 +00:00
trezor-firmware/Makefile
2017-03-07 17:51:21 +01:00

78 lines
2.6 KiB
Makefile

.PHONY: vendor
JOBS=4
MAKE=make -j $(JOBS)
TREZORHAL_BUILD_DIR=micropython/firmware/build
TREZORHAL_PORT_OPTS=FROZEN_MPY_DIR=src
UNIX_PORT_OPTS=MICROPY_FORCE_32BIT=1 MICROPY_PY_BTREE=0 MICROPY_PY_TERMIOS=0 MICROPY_PY_FFI=0 MICROPY_PY_USSL=0 MICROPY_SSL_AXTLS=0
CROSS_PORT_OPTS=MICROPY_FORCE_32BIT=1
help: ## show this help
@awk 'BEGIN {FS = ":.*?## "} /^[a-zA-Z0-9_-]+:.*?## / {printf "\033[36mmake %-20s\033[0m %s\n", $$1, $$2}' $(MAKEFILE_LIST)
vendor: ## update git submodules
# git submodule update --init
res: ## update resources
./tools/res_collect
build: build_trezorhal build_unix build_cross ## build trezorhal, unix and mpy-cross micropython ports
build_trezorhal: vendor res build_cross ## build trezorhal port with frozen modules
$(MAKE) -f Makefile.firmware $(TREZORHAL_PORT_OPTS)
build_trezorhal_debug: vendor res build_cross ## build trezorhal port with frozen modules and debug symbols
$(MAKE) -f Makefile.firmware $(TREZORHAL_PORT_OPTS) DEBUG=1
build_unix: vendor ## build unix port
$(MAKE) -f ../../../micropython/unix/Makefile -C vendor/micropython/unix $(UNIX_PORT_OPTS)
build_unix_debug: vendor ## build unix port with debug symbols
$(MAKE) -f ../../../micropython/unix/Makefile -C vendor/micropython/unix $(UNIX_PORT_OPTS) DEBUG=1
build_cross: vendor ## build mpy-cross port
$(MAKE) -C vendor/micropython/mpy-cross $(CROSS_PORT_OPTS)
run: ## run unix port
cd src ; ../vendor/micropython/unix/micropython
emu: ## run emulator
./emu.sh
clean: clean_trezorhal clean_unix clean_cross ## clean all builds
clean_trezorhal: ## clean trezorhal build
$(MAKE) -f Makefile.firmware clean $(TREZORHAL_PORT_OPTS)
clean_unix: ## clean unix build
$(MAKE) -f ../../../micropython/unix/Makefile -C vendor/micropython/unix clean $(UNIX_PORT_OPTS)
clean_cross: ## clean mpy-cross build
$(MAKE) -C vendor/micropython/mpy-cross clean $(CROSS_PORT_OPTS)
flash: ## flash firmware using st-flash
st-flash write $(TREZORHAL_BUILD_DIR)/firmware.bin 0x8000000
flash_openocd: $(TREZORHAL_BUILD_DIR)/firmware.hex ## flash firmware using openocd
openocd -f interface/stlink-v2.cfg -f target/stm32f4x.cfg \
-c "init" \
-c "reset init" \
-c "stm32f4x mass_erase 0" \
-c "flash write_image $(TREZORHAL_BUILD_DIR)/firmware.hex" \
-c "reset" \
-c "shutdown"
openocd: ## start openocd which connects to the device
openocd -f interface/stlink-v2.cfg -f target/stm32f4x.cfg
gdb: ## start remote gdb session which connects to the openocd
arm-none-eabi-gdb $(TREZORHAL_BUILD_DIR)/firmware.elf -ex 'target remote localhost:3333'
test: ## run unit tests
cd tests ; ./run_tests.sh
testpy: ## run selected unit tests from python-trezor
cd tests ; ./run_tests_python_trezor.sh