1
0
mirror of https://github.com/trezor/trezor-firmware.git synced 2024-12-30 01:58:11 +00:00
trezor-firmware/bootloader/bootloader.c
2016-10-04 18:01:48 +02:00

108 lines
2.5 KiB
C

#include STM32_HAL_H
#include "crypto.h"
#include "ui.h"
#include "display.h"
// ### from main.c
void flash_error(int n) {
for (int i = 0; i < n; i++) {
// blink(on)
HAL_Delay(250);
// blink(off)
HAL_Delay(250);
}
}
void __attribute__((noreturn)) __fatal_error(const char *msg) {
for (volatile uint32_t delay = 0; delay < 10000000; delay++) {
}
// TODO: printf("FATAL ERROR: %s\n", msg);
for (;;) {
__WFI();
}
}
void nlr_jump_fail(void *val) {
__fatal_error("FATAL: uncaught exception");
}
void SystemClock_Config(void);
// ### from stm32_it.c
/**
* @brief This function handles SysTick Handler.
* @param None
* @retval None
*/
void SysTick_Handler(void) {
// Instead of calling HAL_IncTick we do the increment here of the counter.
// This is purely for efficiency, since SysTick is called 1000 times per
// second at the highest interrupt priority.
// Note: we don't need uwTick to be declared volatile here because this is
// the only place where it can be modified, and the code is more efficient
// without the volatile specifier.
extern uint32_t uwTick;
uwTick += 1;
// Read the systick control regster. This has the side effect of clearing
// the COUNTFLAG bit, which makes the logic in sys_tick_get_microseconds
// work properly.
SysTick->CTRL;
#if 0
// Right now we have the storage and DMA controllers to process during
// this interrupt and we use custom dispatch handlers. If this needs to
// be generalised in the future then a dispatch table can be used as
// follows: ((void(*)(void))(systick_dispatch[uwTick & 0xf]))();
if (STORAGE_IDLE_TICK(uwTick)) {
NVIC->STIR = FLASH_IRQn;
}
if (DMA_IDLE_ENABLED() && DMA_IDLE_TICK(uwTick)) {
dma_idle_handler(uwTick);
}
#endif
}
// ###
int main(void) {
HAL_Init();
SystemClock_Config();
__GPIOA_CLK_ENABLE();
__GPIOB_CLK_ENABLE();
__GPIOC_CLK_ENABLE();
__GPIOD_CLK_ENABLE();
display_init();
display_clear();
uint8_t hash[32];
hash_flash(hash);
screen_welcome();
uint8_t *pubkey = (uint8_t *)"ThisIsJustAFakePublicKeyForTest!";
uint8_t *signature = (uint8_t *)"ThisIsJustAFakeSignatureToTestTheVerifyMechanismInTRZRBootloader";
ed25519_verify(hash, 32, pubkey, signature);
for (;;) {
display_backlight(255);
HAL_Delay(250);
display_backlight(0);
HAL_Delay(250);
}
__fatal_error("end");
return 0;
}