mirror of
https://github.com/trezor/trezor-firmware.git
synced 2024-12-24 15:28:10 +00:00
356 lines
11 KiB
C
356 lines
11 KiB
C
/*
|
|
* This file is part of the Trezor project, https://trezor.io/
|
|
*
|
|
* Copyright (c) SatoshiLabs
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/*
|
|
* This file is part of the Micro Python project, http://micropython.org/
|
|
*
|
|
* The MIT License (MIT)
|
|
*
|
|
* Copyright (c) 2013, 2014 Damien P. George
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
* in the Software without restriction, including without limitation the rights
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
* furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
* THE SOFTWARE.
|
|
*/
|
|
|
|
#include STM32_HAL_H
|
|
|
|
#include <string.h>
|
|
|
|
#include "dma.h"
|
|
#include "irq.h"
|
|
#include "sdcard-set_clr_card_detect.h"
|
|
#include "sdcard.h"
|
|
#include "supervise.h"
|
|
|
|
#define SDMMC_CLK_ENABLE() __HAL_RCC_SDMMC1_CLK_ENABLE()
|
|
#define SDMMC_CLK_DISABLE() __HAL_RCC_SDMMC1_CLK_DISABLE()
|
|
#define SDMMC_IRQn SDMMC1_IRQn
|
|
#define SDMMC_DMA dma_SDIO_0
|
|
|
|
static SD_HandleTypeDef sd_handle;
|
|
|
|
static inline void sdcard_default_pin_state(void) {
|
|
HAL_GPIO_WritePin(GPIOC, GPIO_PIN_0, GPIO_PIN_SET); // SD_ON/PC0
|
|
HAL_GPIO_WritePin(GPIOC, GPIO_PIN_8, GPIO_PIN_RESET); // SD_DAT0/PC8
|
|
HAL_GPIO_WritePin(GPIOC, GPIO_PIN_9, GPIO_PIN_RESET); // SD_DAT1/PC9
|
|
HAL_GPIO_WritePin(GPIOC, GPIO_PIN_10, GPIO_PIN_RESET); // SD_DAT2/PC10
|
|
HAL_GPIO_WritePin(GPIOC, GPIO_PIN_11, GPIO_PIN_RESET); // SD_DAT3/PC11
|
|
HAL_GPIO_WritePin(GPIOC, GPIO_PIN_12, GPIO_PIN_RESET); // SD_CLK/PC12
|
|
HAL_GPIO_WritePin(GPIOD, GPIO_PIN_2, GPIO_PIN_RESET); // SD_CMD/PD2
|
|
|
|
GPIO_InitTypeDef GPIO_InitStructure;
|
|
|
|
// configure the SD card circuitry on/off pin
|
|
GPIO_InitStructure.Mode = GPIO_MODE_OUTPUT_PP;
|
|
GPIO_InitStructure.Pull = GPIO_NOPULL;
|
|
GPIO_InitStructure.Speed = GPIO_SPEED_FREQ_LOW;
|
|
GPIO_InitStructure.Pin = GPIO_PIN_0;
|
|
HAL_GPIO_Init(GPIOC, &GPIO_InitStructure);
|
|
|
|
// configure SD GPIO
|
|
GPIO_InitStructure.Mode = GPIO_MODE_OUTPUT_PP;
|
|
GPIO_InitStructure.Pull = GPIO_NOPULL;
|
|
GPIO_InitStructure.Speed = GPIO_SPEED_FREQ_LOW;
|
|
GPIO_InitStructure.Pin =
|
|
GPIO_PIN_8 | GPIO_PIN_9 | GPIO_PIN_10 | GPIO_PIN_11 | GPIO_PIN_12;
|
|
HAL_GPIO_Init(GPIOC, &GPIO_InitStructure);
|
|
GPIO_InitStructure.Pin = GPIO_PIN_2;
|
|
HAL_GPIO_Init(GPIOD, &GPIO_InitStructure);
|
|
|
|
// configure the SD card detect pin
|
|
GPIO_InitStructure.Mode = GPIO_MODE_INPUT;
|
|
GPIO_InitStructure.Pull = GPIO_PULLUP;
|
|
GPIO_InitStructure.Speed = GPIO_SPEED_FREQ_LOW;
|
|
GPIO_InitStructure.Pin = GPIO_PIN_13;
|
|
HAL_GPIO_Init(GPIOC, &GPIO_InitStructure);
|
|
}
|
|
|
|
static inline void sdcard_active_pin_state(void) {
|
|
HAL_GPIO_WritePin(GPIOC, GPIO_PIN_0, GPIO_PIN_RESET); // SD_ON/PC0
|
|
HAL_Delay(10); // we need to wait until the circuit fully kicks-in
|
|
|
|
GPIO_InitTypeDef GPIO_InitStructure;
|
|
|
|
// configure SD GPIO
|
|
GPIO_InitStructure.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStructure.Pull = GPIO_PULLUP;
|
|
GPIO_InitStructure.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
GPIO_InitStructure.Alternate = GPIO_AF12_SDIO;
|
|
GPIO_InitStructure.Pin =
|
|
GPIO_PIN_8 | GPIO_PIN_9 | GPIO_PIN_10 | GPIO_PIN_11 | GPIO_PIN_12;
|
|
HAL_GPIO_Init(GPIOC, &GPIO_InitStructure);
|
|
GPIO_InitStructure.Pin = GPIO_PIN_2;
|
|
HAL_GPIO_Init(GPIOD, &GPIO_InitStructure);
|
|
}
|
|
|
|
void sdcard_init(void) { sdcard_default_pin_state(); }
|
|
|
|
void HAL_SD_MspInit(SD_HandleTypeDef *hsd) {
|
|
if (hsd->Instance == sd_handle.Instance) {
|
|
// enable SDIO clock
|
|
SDMMC_CLK_ENABLE();
|
|
|
|
// NVIC configuration for SDIO interrupts
|
|
svc_setpriority(SDMMC_IRQn, IRQ_PRI_SDIO);
|
|
svc_enableIRQ(SDMMC_IRQn);
|
|
}
|
|
|
|
// GPIO have already been initialised by sdcard_init
|
|
}
|
|
|
|
void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd) {
|
|
if (hsd->Instance == sd_handle.Instance) {
|
|
svc_disableIRQ(SDMMC_IRQn);
|
|
SDMMC_CLK_DISABLE();
|
|
}
|
|
}
|
|
|
|
secbool sdcard_power_on(void) {
|
|
if (sectrue != sdcard_is_present()) {
|
|
return secfalse;
|
|
}
|
|
if (sd_handle.Instance) {
|
|
return sectrue;
|
|
}
|
|
// turn on SD card circuitry
|
|
sdcard_active_pin_state();
|
|
HAL_Delay(50);
|
|
|
|
// SD device interface configuration
|
|
sd_handle.Instance = SDIO;
|
|
sd_handle.Init.ClockEdge = SDIO_CLOCK_EDGE_RISING;
|
|
sd_handle.Init.ClockBypass = SDIO_CLOCK_BYPASS_DISABLE;
|
|
sd_handle.Init.ClockPowerSave = SDIO_CLOCK_POWER_SAVE_ENABLE;
|
|
sd_handle.Init.BusWide = SDIO_BUS_WIDE_1B;
|
|
sd_handle.Init.HardwareFlowControl = SDIO_HARDWARE_FLOW_CONTROL_DISABLE;
|
|
sd_handle.Init.ClockDiv = SDIO_TRANSFER_CLK_DIV;
|
|
|
|
// init the SD interface, with retry if it's not ready yet
|
|
for (int retry = 10; HAL_SD_Init(&sd_handle) != HAL_OK; retry--) {
|
|
if (retry == 0) {
|
|
goto error;
|
|
}
|
|
HAL_Delay(50);
|
|
}
|
|
|
|
// disable the card's internal CD/DAT3 card detect pull-up resistor
|
|
// to send ACMD42, we have to send CMD55 (APP_CMD) with with the card's RCA as
|
|
// the argument followed by CMD42 (SET_CLR_CARD_DETECT)
|
|
if (SDMMC_CmdAppCommand(sd_handle.Instance, sd_handle.SdCard.RelCardAdd
|
|
<< 16U) != SDMMC_ERROR_NONE) {
|
|
goto error;
|
|
}
|
|
if (SDMMC_CmdSetClrCardDetect(sd_handle.Instance, 0) != SDMMC_ERROR_NONE) {
|
|
goto error;
|
|
}
|
|
|
|
// configure the SD bus width for wide operation
|
|
if (HAL_SD_ConfigWideBusOperation(&sd_handle, SDIO_BUS_WIDE_4B) != HAL_OK) {
|
|
HAL_SD_DeInit(&sd_handle);
|
|
goto error;
|
|
}
|
|
|
|
return sectrue;
|
|
|
|
error:
|
|
sdcard_power_off();
|
|
return secfalse;
|
|
}
|
|
|
|
void sdcard_power_off(void) {
|
|
if (sd_handle.Instance) {
|
|
HAL_SD_DeInit(&sd_handle);
|
|
sd_handle.Instance = NULL;
|
|
}
|
|
// turn off SD card circuitry
|
|
HAL_Delay(50);
|
|
sdcard_default_pin_state();
|
|
HAL_Delay(100);
|
|
}
|
|
|
|
secbool sdcard_is_present(void) {
|
|
return sectrue * (GPIO_PIN_RESET == HAL_GPIO_ReadPin(GPIOC, GPIO_PIN_13));
|
|
}
|
|
|
|
uint64_t sdcard_get_capacity_in_bytes(void) {
|
|
if (sd_handle.Instance == NULL) {
|
|
return 0;
|
|
}
|
|
HAL_SD_CardInfoTypeDef cardinfo;
|
|
HAL_SD_GetCardInfo(&sd_handle, &cardinfo);
|
|
return (uint64_t)cardinfo.LogBlockNbr * (uint64_t)cardinfo.LogBlockSize;
|
|
}
|
|
|
|
void SDIO_IRQHandler(void) {
|
|
IRQ_ENTER(SDIO_IRQn);
|
|
if (sd_handle.Instance) {
|
|
HAL_SD_IRQHandler(&sd_handle);
|
|
}
|
|
IRQ_EXIT(SDIO_IRQn);
|
|
}
|
|
|
|
static void sdcard_reset_periph(void) {
|
|
// Fully reset the SDMMC peripheral before calling HAL SD DMA functions.
|
|
// (There could be an outstanding DTIMEOUT event from a previous call and the
|
|
// HAL function enables IRQs before fully configuring the SDMMC peripheral.)
|
|
SDIO->DTIMER = 0;
|
|
SDIO->DLEN = 0;
|
|
SDIO->DCTRL = 0;
|
|
SDIO->ICR = SDMMC_STATIC_FLAGS;
|
|
}
|
|
|
|
static HAL_StatusTypeDef sdcard_wait_finished(SD_HandleTypeDef *sd,
|
|
uint32_t timeout) {
|
|
// Wait for HAL driver to be ready (eg for DMA to finish)
|
|
uint32_t start = HAL_GetTick();
|
|
for (;;) {
|
|
// Do an atomic check of the state; WFI will exit even if IRQs are disabled
|
|
uint32_t irq_state = disable_irq();
|
|
if (sd->State != HAL_SD_STATE_BUSY) {
|
|
enable_irq(irq_state);
|
|
break;
|
|
}
|
|
__WFI();
|
|
enable_irq(irq_state);
|
|
if (HAL_GetTick() - start >= timeout) {
|
|
return HAL_TIMEOUT;
|
|
}
|
|
}
|
|
|
|
// Wait for SD card to complete the operation
|
|
for (;;) {
|
|
HAL_SD_CardStateTypeDef state = HAL_SD_GetCardState(sd);
|
|
if (state == HAL_SD_CARD_TRANSFER) {
|
|
return HAL_OK;
|
|
}
|
|
if (!(state == HAL_SD_CARD_SENDING || state == HAL_SD_CARD_RECEIVING ||
|
|
state == HAL_SD_CARD_PROGRAMMING)) {
|
|
return HAL_ERROR;
|
|
}
|
|
if (HAL_GetTick() - start >= timeout) {
|
|
return HAL_TIMEOUT;
|
|
}
|
|
__WFI();
|
|
}
|
|
return HAL_OK;
|
|
}
|
|
|
|
secbool sdcard_read_blocks(uint32_t *dest, uint32_t block_num,
|
|
uint32_t num_blocks) {
|
|
// check that SD card is initialised
|
|
if (sd_handle.Instance == NULL) {
|
|
return secfalse;
|
|
}
|
|
|
|
// check that dest pointer is aligned on a 4-byte boundary
|
|
if (((uint32_t)dest & 3) != 0) {
|
|
return secfalse;
|
|
}
|
|
|
|
HAL_StatusTypeDef err = HAL_OK;
|
|
|
|
// we must disable USB irqs to prevent MSC contention with SD card
|
|
uint32_t basepri = raise_irq_pri(IRQ_PRI_OTG_FS);
|
|
|
|
DMA_HandleTypeDef sd_dma;
|
|
dma_init(&sd_dma, &SDMMC_DMA, DMA_PERIPH_TO_MEMORY, &sd_handle);
|
|
sd_handle.hdmarx = &sd_dma;
|
|
|
|
// we need to assign hdmatx even though it's unused
|
|
// because STMHAL tries to access its error code in SD_DMAError()
|
|
// even though it shouldn't :-/
|
|
// this will get removed eventually when we update to new STMHAL
|
|
DMA_HandleTypeDef dummy_dma;
|
|
memset(&dummy_dma, 0, sizeof(dummy_dma));
|
|
sd_handle.hdmatx = &dummy_dma;
|
|
|
|
sdcard_reset_periph();
|
|
err =
|
|
HAL_SD_ReadBlocks_DMA(&sd_handle, (uint8_t *)dest, block_num, num_blocks);
|
|
if (err == HAL_OK) {
|
|
err = sdcard_wait_finished(&sd_handle, 5000);
|
|
}
|
|
|
|
dma_deinit(&SDMMC_DMA);
|
|
sd_handle.hdmarx = NULL;
|
|
|
|
restore_irq_pri(basepri);
|
|
|
|
return sectrue * (err == HAL_OK);
|
|
}
|
|
|
|
secbool sdcard_write_blocks(const uint32_t *src, uint32_t block_num,
|
|
uint32_t num_blocks) {
|
|
// check that SD card is initialised
|
|
if (sd_handle.Instance == NULL) {
|
|
return secfalse;
|
|
}
|
|
|
|
// check that src pointer is aligned on a 4-byte boundary
|
|
if (((uint32_t)src & 3) != 0) {
|
|
return secfalse;
|
|
}
|
|
|
|
HAL_StatusTypeDef err = HAL_OK;
|
|
|
|
// we must disable USB irqs to prevent MSC contention with SD card
|
|
uint32_t basepri = raise_irq_pri(IRQ_PRI_OTG_FS);
|
|
|
|
DMA_HandleTypeDef sd_dma;
|
|
dma_init(&sd_dma, &SDMMC_DMA, DMA_MEMORY_TO_PERIPH, &sd_handle);
|
|
sd_handle.hdmatx = &sd_dma;
|
|
|
|
// we need to assign hdmarx even though it's unused
|
|
// because HAL tries to access its error code in SD_DMAError()
|
|
// even though it shouldn't :-/
|
|
// this will get removed eventually when we update to new STMHAL
|
|
DMA_HandleTypeDef dummy_dma;
|
|
memset(&dummy_dma, 0, sizeof(dummy_dma));
|
|
sd_handle.hdmarx = &dummy_dma;
|
|
|
|
sdcard_reset_periph();
|
|
err =
|
|
HAL_SD_WriteBlocks_DMA(&sd_handle, (uint8_t *)src, block_num, num_blocks);
|
|
if (err == HAL_OK) {
|
|
err = sdcard_wait_finished(&sd_handle, 5000);
|
|
}
|
|
|
|
dma_deinit(&SDMMC_DMA);
|
|
sd_handle.hdmatx = NULL;
|
|
|
|
restore_irq_pri(basepri);
|
|
|
|
return sectrue * (err == HAL_OK);
|
|
}
|