arno/trezor-firmware
1
0
Fork 0
mirror of https://github.com/trezor/trezor-firmware.git synced 2024-12-15 10:58:09 +00:00
Code Issues Releases Wiki Activity
03a296f815
trezor-firmware/crypto/aes/aesopt.h
Ondřej Vejpustek 0bdbd924c1 refactor(crypto): optimize size of AES
2024-09-12 14:44:33 +02:00

783 lines
27 KiB
C
Raw Blame History

/*
---------------------------------------------------------------------------
Copyright (c) 1998-2013, Brian Gladman, Worcester, UK. All rights reserved.
The redistribution and use of this software (with or without changes)
is allowed without the payment of fees or royalties provided that:
source code distributions include the above copyright notice, this
list of conditions and the following disclaimer;
binary distributions include the above copyright notice, this list
of conditions and the following disclaimer in their documentation.
This software is provided 'as is' with no explicit or implied warranties
in respect of its operation, including, but not limited to, correctness
and fitness for purpose.
---------------------------------------------------------------------------
Issue Date: 20/12/2007
This file contains the compilation options for AES (Rijndael) and code
that is common across encryption, key scheduling and table generation.
OPERATION
These source code files implement the AES algorithm Rijndael designed by
Joan Daemen and Vincent Rijmen. This version is designed for the standard
block size of 16 bytes and for key sizes of 128, 192 and 256 bits (16, 24
and 32 bytes).
This version is designed for flexibility and speed using operations on
32-bit words rather than operations on bytes. It can be compiled with
either big or little endian internal byte order but is faster when the
native byte order for the processor is used.
THE CIPHER INTERFACE
The cipher interface is implemented as an array of bytes in which lower
AES bit sequence indexes map to higher numeric significance within bytes.
uint8_t (an unsigned 8-bit type)
uint32_t (an unsigned 32-bit type)
struct aes_encrypt_ctx (structure for the cipher encryption context)
struct aes_decrypt_ctx (structure for the cipher decryption context)
AES_RETURN the function return type
C subroutine calls:
AES_RETURN aes_encrypt_key128(const unsigned char *key, aes_encrypt_ctx cx[1]);
AES_RETURN aes_encrypt_key192(const unsigned char *key, aes_encrypt_ctx cx[1]);
AES_RETURN aes_encrypt_key256(const unsigned char *key, aes_encrypt_ctx cx[1]);
AES_RETURN aes_encrypt(const unsigned char *in, unsigned char *out,
const aes_encrypt_ctx cx[1]);
AES_RETURN aes_decrypt_key128(const unsigned char *key, aes_decrypt_ctx cx[1]);
AES_RETURN aes_decrypt_key192(const unsigned char *key, aes_decrypt_ctx cx[1]);
AES_RETURN aes_decrypt_key256(const unsigned char *key, aes_decrypt_ctx cx[1]);
AES_RETURN aes_decrypt(const unsigned char *in, unsigned char *out,
const aes_decrypt_ctx cx[1]);
IMPORTANT NOTE: If you are using this C interface with dynamic tables make sure that
you call aes_init() before AES is used so that the tables are initialised.
C++ aes class subroutines:
Class AESencrypt for encryption
Constructors:
AESencrypt(void)
AESencrypt(const unsigned char *key) - 128 bit key
Members:
AES_RETURN key128(const unsigned char *key)
AES_RETURN key192(const unsigned char *key)
AES_RETURN key256(const unsigned char *key)
AES_RETURN encrypt(const unsigned char *in, unsigned char *out) const
Class AESdecrypt for encryption
Constructors:
AESdecrypt(void)
AESdecrypt(const unsigned char *key) - 128 bit key
Members:
AES_RETURN key128(const unsigned char *key)
AES_RETURN key192(const unsigned char *key)
AES_RETURN key256(const unsigned char *key)
AES_RETURN decrypt(const unsigned char *in, unsigned char *out) const
*/
#if !defined( _AESOPT_H )
#define _AESOPT_H
#if defined( __cplusplus )
#include "aescpp.h"
#else
#include "aes.h"
#endif
/* PLATFORM SPECIFIC INCLUDES */
#include "brg_endian.h"
/* CONFIGURATION - THE USE OF DEFINES
Later in this section there are a number of defines that control the
operation of the code. In each section, the purpose of each define is
explained so that the relevant form can be included or excluded by
setting either 1's or 0's respectively on the branches of the related
#if clauses. The following local defines should not be changed.
*/
#define ENCRYPTION_IN_C 1
#define DECRYPTION_IN_C 2
#define ENC_KEYING_IN_C 4
#define DEC_KEYING_IN_C 8
#define NO_TABLES 0
#define ONE_TABLE 1
#define FOUR_TABLES 4
#define NONE 0
#define PARTIAL 1
#define FULL 2
/* --- START OF USER CONFIGURED OPTIONS --- */
/* 1. BYTE ORDER WITHIN 32 BIT WORDS
The fundamental data processing units in Rijndael are 8-bit bytes. The
input, output and key input are all enumerated arrays of bytes in which
bytes are numbered starting at zero and increasing to one less than the
number of bytes in the array in question. This enumeration is only used
for naming bytes and does not imply any adjacency or order relationship
from one byte to another. When these inputs and outputs are considered
as bit sequences, bits 8*n to 8*n+7 of the bit sequence are mapped to
byte[n] with bit 8n+i in the sequence mapped to bit 7-i within the byte.
In this implementation bits are numbered from 0 to 7 starting at the
numerically least significant end of each byte (bit n represents 2^n).
However, Rijndael can be implemented more efficiently using 32-bit
words by packing bytes into words so that bytes 4*n to 4*n+3 are placed
into word[n]. While in principle these bytes can be assembled into words
in any positions, this implementation only supports the two formats in
which bytes in adjacent positions within words also have adjacent byte
numbers. This order is called big-endian if the lowest numbered bytes
in words have the highest numeric significance and little-endian if the
opposite applies.
This code can work in either order irrespective of the order used by the
machine on which it runs. Normally the internal byte order will be set
to the order of the processor on which the code is to be run but this
define can be used to reverse this in special situations
WARNING: Assembler code versions rely on PLATFORM_BYTE_ORDER being set.
This define will hence be redefined later (in section 4) if necessary
*/
#if 1
# define ALGORITHM_BYTE_ORDER PLATFORM_BYTE_ORDER
#elif 0
# define ALGORITHM_BYTE_ORDER IS_LITTLE_ENDIAN
#elif 0
# define ALGORITHM_BYTE_ORDER IS_BIG_ENDIAN
#else
# error The algorithm byte order is not defined
#endif
/* 2. Intel AES AND VIA ACE SUPPORT */
#if defined( __GNUC__ ) && defined( __i386__ ) && !defined(__BEOS__) \
|| defined( _WIN32 ) && defined( _M_IX86 ) && !(defined( _WIN64 ) \
|| defined( _WIN32_WCE ) || defined( _MSC_VER ) && ( _MSC_VER <= 800 ))
# define VIA_ACE_POSSIBLE
#endif
/* AESNI is supported by all Windows x64 compilers, but for Linux/GCC
we have to test for SSE 2, SSE 3, and AES to before enabling it; */
#if !defined( INTEL_AES_POSSIBLE )
# if defined( _WIN64 ) && defined( _MSC_VER ) \
|| defined( __GNUC__ ) && defined( __x86_64__ ) && \
defined( __SSE2__ ) && defined( __SSE3__ ) && \
defined( __AES__ )
# define INTEL_AES_POSSIBLE
# endif
#endif
/* Define this option if support for the Intel AESNI is required
If USE_INTEL_AES_IF_PRESENT is defined then AESNI will be used
if it is detected (both present and enabled).
AESNI uses a decryption key schedule with the first decryption
round key at the high end of the key scedule with the following
round keys at lower positions in memory. So AES_REV_DKS must NOT
be defined when AESNI will be used. Although it is unlikely that
assembler code will be used with an AESNI build, if it is then
AES_REV_DKS must NOT be defined when the assembler files are
built (the definition of USE_INTEL_AES_IF_PRESENT in the assembler
code files must match that here if they are used).
*/
#if 0 && defined( INTEL_AES_POSSIBLE ) && !defined( USE_INTEL_AES_IF_PRESENT )
# define USE_INTEL_AES_IF_PRESENT
#endif
/* Define this option if support for the VIA ACE is required. This uses
inline assembler instructions and is only implemented for the Microsoft,
Intel and GCC compilers. If VIA ACE is known to be present, then defining
ASSUME_VIA_ACE_PRESENT will remove the ordinary encryption/decryption
code. If USE_VIA_ACE_IF_PRESENT is defined then VIA ACE will be used if
it is detected (both present and enabled) but the normal AES code will
also be present.
When VIA ACE is to be used, all AES encryption contexts MUST be 16 byte
aligned; other input/output buffers do not need to be 16 byte aligned
but there are very large performance gains if this can be arranged.
VIA ACE also requires the decryption key schedule to be in reverse
order (which later checks below ensure).
AES_REV_DKS must be set for assembler code used with a VIA ACE build
*/
#if 0 && defined( VIA_ACE_POSSIBLE ) && !defined( USE_VIA_ACE_IF_PRESENT )
# define USE_VIA_ACE_IF_PRESENT
#endif
#if 0 && defined( VIA_ACE_POSSIBLE ) && !defined( ASSUME_VIA_ACE_PRESENT )
# define ASSUME_VIA_ACE_PRESENT
# endif
/* 3. ASSEMBLER SUPPORT
This define (which can be on the command line) enables the use of the
assembler code routines for encryption, decryption and key scheduling
as follows:
ASM_X86_V1C uses the assembler (aes_x86_v1.asm) with large tables for
encryption and decryption and but with key scheduling in C
ASM_X86_V2 uses assembler (aes_x86_v2.asm) with compressed tables for
encryption, decryption and key scheduling
ASM_X86_V2C uses assembler (aes_x86_v2.asm) with compressed tables for
encryption and decryption and but with key scheduling in C
ASM_AMD64_C uses assembler (aes_amd64.asm) with compressed tables for
encryption and decryption and but with key scheduling in C
Change one 'if 0' below to 'if 1' to select the version or define
as a compilation option.
*/
#if 0 && !defined( ASM_X86_V1C )
# define ASM_X86_V1C
#elif 0 && !defined( ASM_X86_V2 )
# define ASM_X86_V2
#elif 0 && !defined( ASM_X86_V2C )
# define ASM_X86_V2C
#elif 0 && !defined( ASM_AMD64_C )
# define ASM_AMD64_C
#endif
#if defined( __i386 ) || defined( _M_IX86 )
# define A32_
#elif defined( __x86_64__ ) || defined( _M_X64 )
# define A64_
#endif
#if (defined ( ASM_X86_V1C ) || defined( ASM_X86_V2 ) || defined( ASM_X86_V2C )) \
&& !defined( A32_ ) || defined( ASM_AMD64_C ) && !defined( A64_ )
# error Assembler code is only available for x86 and AMD64 systems
#endif
/* 4. FAST INPUT/OUTPUT OPERATIONS.
On some machines it is possible to improve speed by transferring the
bytes in the input and output arrays to and from the internal 32-bit
variables by addressing these arrays as if they are arrays of 32-bit
words. On some machines this will always be possible but there may
be a large performance penalty if the byte arrays are not aligned on
the normal word boundaries. On other machines this technique will
lead to memory access errors when such 32-bit word accesses are not
properly aligned. The option SAFE_IO avoids such problems but will
often be slower on those machines that support misaligned access
(especially so if care is taken to align the input and output byte
arrays on 32-bit word boundaries). If SAFE_IO is not defined it is
assumed that access to byte arrays as if they are arrays of 32-bit
words will not cause problems when such accesses are misaligned.
*/
#if 1 && !defined( _MSC_VER )
# define SAFE_IO
#endif
/* 5. LOOP UNROLLING
The code for encryption and decrytpion cycles through a number of rounds
that can be implemented either in a loop or by expanding the code into a
long sequence of instructions, the latter producing a larger program but
one that will often be much faster. The latter is called loop unrolling.
There are also potential speed advantages in expanding two iterations in
a loop with half the number of iterations, which is called partial loop
unrolling. The following options allow partial or full loop unrolling
to be set independently for encryption and decryption
*/
#if 0
# define ENC_UNROLL FULL
#elif 0
# define ENC_UNROLL PARTIAL
#else
# define ENC_UNROLL NONE
#endif
#if 1
# define DEC_UNROLL FULL
#elif 0
# define DEC_UNROLL PARTIAL
#else
# define DEC_UNROLL NONE
#endif
#if 0
# define ENC_KS_UNROLL
#endif
#if 0
# define DEC_KS_UNROLL
#endif
/* 6. FAST FINITE FIELD OPERATIONS
If this section is included, tables are used to provide faster finite
field arithmetic (this has no effect if STATIC_TABLES is defined).
*/
#if 0
# define FF_TABLES
#endif
/* 7. INTERNAL STATE VARIABLE FORMAT
The internal state of Rijndael is stored in a number of local 32-bit
word varaibles which can be defined either as an array or as individual
names variables. Include this section if you want to store these local
varaibles in arrays. Otherwise individual local variables will be used.
*/
#if 1
# define ARRAYS
#endif
/* 8. FIXED OR DYNAMIC TABLES
When this section is included the tables used by the code are compiled
statically into the binary file. Otherwise the subroutine aes_init()
must be called to compute them before the code is first used.
*/
#if 1 && !(defined( _MSC_VER ) && ( _MSC_VER <= 800 ))
# define STATIC_TABLES
#endif
/* 9. MASKING OR CASTING FROM LONGER VALUES TO BYTES
In some systems it is better to mask longer values to extract bytes
rather than using a cast. This option allows this choice.
*/
#if 0
# define to_byte(x) ((uint8_t)(x))
#else
# define to_byte(x) ((x) & 0xff)
#endif
/* 10. TABLE ALIGNMENT
On some sytsems speed will be improved by aligning the AES large lookup
tables on particular boundaries. This define should be set to a power of
two giving the desired alignment. It can be left undefined if alignment
is not needed. This option is specific to the Microsft VC++ compiler -
it seems to sometimes cause trouble for the VC++ version 6 compiler.
*/
#if 1 && defined( _MSC_VER ) && ( _MSC_VER >= 1300 )
# define TABLE_ALIGN 32
#endif
/* 11. REDUCE CODE AND TABLE SIZE
This replaces some expanded macros with function calls if AES_ASM_V2 or
AES_ASM_V2C are defined
*/
#if 1 && (defined( ASM_X86_V2 ) || defined( ASM_X86_V2C ))
# define REDUCE_CODE_SIZE
#endif
/* 12. TABLE OPTIONS
This cipher proceeds by repeating in a number of cycles known as 'rounds'
which are implemented by a round function which can optionally be speeded
up using tables. The basic tables are each 256 32-bit words, with either
one or four tables being required for each round function depending on
how much speed is required. The encryption and decryption round functions
are different and the last encryption and decrytpion round functions are
different again making four different round functions in all.
This means that:
1. Normal encryption and decryption rounds can each use either 0, 1
or 4 tables and table spaces of 0, 1024 or 4096 bytes each.
2. The last encryption and decryption rounds can also use either 0, 1
or 4 tables and table spaces of 0, 1024 or 4096 bytes each.
Include or exclude the appropriate definitions below to set the number
of tables used by this implementation.
*/
#if 0 /* set tables for the normal encryption round */
# define ENC_ROUND FOUR_TABLES
#elif 0
# define ENC_ROUND ONE_TABLE
#else
# define ENC_ROUND NO_TABLES
#endif
#if 0 /* set tables for the last encryption round */
# define LAST_ENC_ROUND FOUR_TABLES
#elif 0
# define LAST_ENC_ROUND ONE_TABLE
#else
# define LAST_ENC_ROUND NO_TABLES
#endif
#if 0 /* set tables for the normal decryption round */
# define DEC_ROUND FOUR_TABLES
#elif 0
# define DEC_ROUND ONE_TABLE
#else
# define DEC_ROUND NO_TABLES
#endif
#if 0 /* set tables for the last decryption round */
# define LAST_DEC_ROUND FOUR_TABLES
#elif 0
# define LAST_DEC_ROUND ONE_TABLE
#else
# define LAST_DEC_ROUND NO_TABLES
#endif
/* The decryption key schedule can be speeded up with tables in the same
way that the round functions can. Include or exclude the following
defines to set this requirement.
*/
#if 0
# define KEY_SCHED FOUR_TABLES
#elif 0
# define KEY_SCHED ONE_TABLE
#else
# define KEY_SCHED NO_TABLES
#endif
/* ---- END OF USER CONFIGURED OPTIONS ---- */
/* VIA ACE support is only available for VC++ and GCC */
#if !defined( _MSC_VER ) && !defined( __GNUC__ )
# if defined( ASSUME_VIA_ACE_PRESENT )
# undef ASSUME_VIA_ACE_PRESENT
# endif
# if defined( USE_VIA_ACE_IF_PRESENT )
# undef USE_VIA_ACE_IF_PRESENT
# endif
#endif
#if defined( ASSUME_VIA_ACE_PRESENT ) && !defined( USE_VIA_ACE_IF_PRESENT )
# define USE_VIA_ACE_IF_PRESENT
#endif
/* define to reverse decryption key schedule */
#if 1 || defined( USE_VIA_ACE_IF_PRESENT ) && !defined ( AES_REV_DKS )
# define AES_REV_DKS
#endif
/* Intel AESNI uses a decryption key schedule in the encryption order */
#if defined( USE_INTEL_AES_IF_PRESENT ) && defined ( AES_REV_DKS )
# undef AES_REV_DKS
#endif
/* Assembler support requires the use of platform byte order */
#if ( defined( ASM_X86_V1C ) || defined( ASM_X86_V2C ) || defined( ASM_AMD64_C ) ) \
&& (ALGORITHM_BYTE_ORDER != PLATFORM_BYTE_ORDER)
# undef ALGORITHM_BYTE_ORDER
# define ALGORITHM_BYTE_ORDER PLATFORM_BYTE_ORDER
#endif
/* In this implementation the columns of the state array are each held in
32-bit words. The state array can be held in various ways: in an array
of words, in a number of individual word variables or in a number of
processor registers. The following define maps a variable name x and
a column number c to the way the state array variable is to be held.
The first define below maps the state into an array x[c] whereas the
second form maps the state into a number of individual variables x0,
x1, etc. Another form could map individual state colums to machine
register names.
*/
#if defined( ARRAYS )
# define s(x,c) x[c]
#else
# define s(x,c) x##c
#endif
/* This implementation provides subroutines for encryption, decryption
and for setting the three key lengths (separately) for encryption
and decryption. Since not all functions are needed, masks are set
up here to determine which will be implemented in C
*/
#if !defined( AES_ENCRYPT )
# define EFUNCS_IN_C 0
#elif defined( ASSUME_VIA_ACE_PRESENT ) || defined( ASM_X86_V1C ) \
|| defined( ASM_X86_V2C ) || defined( ASM_AMD64_C )
# define EFUNCS_IN_C ENC_KEYING_IN_C
#elif !defined( ASM_X86_V2 )
# define EFUNCS_IN_C ( ENCRYPTION_IN_C | ENC_KEYING_IN_C )
#else
# define EFUNCS_IN_C 0
#endif
#if !defined( AES_DECRYPT )
# define DFUNCS_IN_C 0
#elif defined( ASSUME_VIA_ACE_PRESENT ) || defined( ASM_X86_V1C ) \
|| defined( ASM_X86_V2C ) || defined( ASM_AMD64_C )
# define DFUNCS_IN_C DEC_KEYING_IN_C
#elif !defined( ASM_X86_V2 )
# define DFUNCS_IN_C ( DECRYPTION_IN_C | DEC_KEYING_IN_C )
#else
# define DFUNCS_IN_C 0
#endif
#define FUNCS_IN_C ( EFUNCS_IN_C | DFUNCS_IN_C )
/* END OF CONFIGURATION OPTIONS */
#define RC_LENGTH (5 * (AES_BLOCK_SIZE / 4 - 2))
/* Disable or report errors on some combinations of options */
#if ENC_ROUND == NO_TABLES && LAST_ENC_ROUND != NO_TABLES
# undef LAST_ENC_ROUND
# define LAST_ENC_ROUND NO_TABLES
#elif ENC_ROUND == ONE_TABLE && LAST_ENC_ROUND == FOUR_TABLES
# undef LAST_ENC_ROUND
# define LAST_ENC_ROUND ONE_TABLE
#endif
#if ENC_ROUND == NO_TABLES && ENC_UNROLL != NONE
# undef ENC_UNROLL
# define ENC_UNROLL NONE
#endif
#if DEC_ROUND == NO_TABLES && LAST_DEC_ROUND != NO_TABLES
# undef LAST_DEC_ROUND
# define LAST_DEC_ROUND NO_TABLES
#elif DEC_ROUND == ONE_TABLE && LAST_DEC_ROUND == FOUR_TABLES
# undef LAST_DEC_ROUND
# define LAST_DEC_ROUND ONE_TABLE
#endif
#if DEC_ROUND == NO_TABLES && DEC_UNROLL != NONE
# undef DEC_UNROLL
# define DEC_UNROLL NONE
#endif
#if defined( bswap32 )
# define aes_sw32 bswap32
#elif defined( bswap_32 )
# define aes_sw32 bswap_32
#else
# define brot(x,n) (((uint32_t)(x) << n) | ((uint32_t)(x) >> (32 - n)))
# define aes_sw32(x) ((brot((x),8) & 0x00ff00ff) | (brot((x),24) & 0xff00ff00))
#endif
/* upr(x,n): rotates bytes within words by n positions, moving bytes to
higher index positions with wrap around into low positions
ups(x,n): moves bytes by n positions to higher index positions in
words but without wrap around
bval(x,n): extracts a byte from a word
WARNING: The definitions given here are intended only for use with
unsigned variables and with shift counts that are compile
time constants
*/
#if ( ALGORITHM_BYTE_ORDER == IS_LITTLE_ENDIAN )
# define upr(x,n) (((uint32_t)(x) << (8 * (n))) | ((uint32_t)(x) >> (32 - 8 * (n))))
# define ups(x,n) ((uint32_t) (x) << (8 * (n)))
# define bval(x,n) to_byte((x) >> (8 * (n)))
# define bytes2word(b0, b1, b2, b3) \
(((uint32_t)(b3) << 24) | ((uint32_t)(b2) << 16) | ((uint32_t)(b1) << 8) | (b0))
#endif
#if ( ALGORITHM_BYTE_ORDER == IS_BIG_ENDIAN )
# define upr(x,n) (((uint32_t)(x) >> (8 * (n))) | ((uint32_t)(x) << (32 - 8 * (n))))
# define ups(x,n) ((uint32_t) (x) >> (8 * (n)))
# define bval(x,n) to_byte((x) >> (24 - 8 * (n)))
# define bytes2word(b0, b1, b2, b3) \
(((uint32_t)(b0) << 24) | ((uint32_t)(b1) << 16) | ((uint32_t)(b2) << 8) | (b3))
#endif
#if defined( SAFE_IO )
# define word_in(x,c) bytes2word(((const uint8_t*)(x)+4*c)[0], ((const uint8_t*)(x)+4*c)[1], \
((const uint8_t*)(x)+4*c)[2], ((const uint8_t*)(x)+4*c)[3])
# define word_out(x,c,v) { ((uint8_t*)(x)+4*c)[0] = bval(v,0); ((uint8_t*)(x)+4*c)[1] = bval(v,1); \
((uint8_t*)(x)+4*c)[2] = bval(v,2); ((uint8_t*)(x)+4*c)[3] = bval(v,3); }
#elif ( ALGORITHM_BYTE_ORDER == PLATFORM_BYTE_ORDER )
# define word_in(x,c) (*((uint32_t*)(x)+(c)))
# define word_out(x,c,v) (*((uint32_t*)(x)+(c)) = (v))
#else
# define word_in(x,c) aes_sw32(*((uint32_t*)(x)+(c)))
# define word_out(x,c,v) (*((uint32_t*)(x)+(c)) = aes_sw32(v))
#endif
/* the finite field modular polynomial and elements */
#define WPOLY 0x011b
#define BPOLY 0x1b
/* multiply four bytes in GF(2^8) by 'x' {02} in parallel */
#define gf_c1 0x80808080
#define gf_c2 0x7f7f7f7f
#define gf_mulx(x) ((((x) & gf_c2) << 1) ^ ((((x) & gf_c1) >> 7) * BPOLY))
/* The following defines provide alternative definitions of gf_mulx that might
give improved performance if a fast 32-bit multiply is not available. Note
that a temporary variable u needs to be defined where gf_mulx is used.
#define gf_mulx(x) (u = (x) & gf_c1, u |= (u >> 1), ((x) & gf_c2) << 1) ^ ((u >> 3) | (u >> 6))
#define gf_c4 (0x01010101 * BPOLY)
#define gf_mulx(x) (u = (x) & gf_c1, ((x) & gf_c2) << 1) ^ ((u - (u >> 7)) & gf_c4)
*/
/* Work out which tables are needed for the different options */
#if defined( ASM_X86_V1C )
# if defined( ENC_ROUND )
# undef ENC_ROUND
# endif
# define ENC_ROUND FOUR_TABLES
# if defined( LAST_ENC_ROUND )
# undef LAST_ENC_ROUND
# endif
# define LAST_ENC_ROUND FOUR_TABLES
# if defined( DEC_ROUND )
# undef DEC_ROUND
# endif
# define DEC_ROUND FOUR_TABLES
# if defined( LAST_DEC_ROUND )
# undef LAST_DEC_ROUND
# endif
# define LAST_DEC_ROUND FOUR_TABLES
# if defined( KEY_SCHED )
# undef KEY_SCHED
# define KEY_SCHED FOUR_TABLES
# endif
#endif
#if ( FUNCS_IN_C & ENCRYPTION_IN_C ) || defined( ASM_X86_V1C )
# if ENC_ROUND == ONE_TABLE
# define FT1_SET
# elif ENC_ROUND == FOUR_TABLES
# define FT4_SET
# else
# define SBX_SET
# endif
# if LAST_ENC_ROUND == ONE_TABLE
# define FL1_SET
# elif LAST_ENC_ROUND == FOUR_TABLES
# define FL4_SET
# elif !defined( SBX_SET )
# define SBX_SET
# endif
#endif
#if ( FUNCS_IN_C & DECRYPTION_IN_C ) || defined( ASM_X86_V1C )
# if DEC_ROUND == ONE_TABLE
# define IT1_SET
# elif DEC_ROUND == FOUR_TABLES
# define IT4_SET
# else
# define ISB_SET
# endif
# if LAST_DEC_ROUND == ONE_TABLE
# define IL1_SET
# elif LAST_DEC_ROUND == FOUR_TABLES
# define IL4_SET
# elif !defined(ISB_SET)
# define ISB_SET
# endif
#endif
#if !(defined( REDUCE_CODE_SIZE ) && (defined( ASM_X86_V2 ) || defined( ASM_X86_V2C )))
# if ((FUNCS_IN_C & ENC_KEYING_IN_C) || (FUNCS_IN_C & DEC_KEYING_IN_C))
# if KEY_SCHED == ONE_TABLE
# if !defined( FL1_SET ) && !defined( FL4_SET )
# define LS1_SET
# endif
# elif KEY_SCHED == FOUR_TABLES
# if !defined( FL4_SET )
# define LS4_SET
# endif
# elif !defined( SBX_SET )
# define SBX_SET
# endif
# endif
# if (FUNCS_IN_C & DEC_KEYING_IN_C)
# if KEY_SCHED == ONE_TABLE
# define IM1_SET
# elif KEY_SCHED == FOUR_TABLES
# define IM4_SET
# elif !defined( SBX_SET )
# define SBX_SET
# endif
# endif
#endif
/* generic definitions of Rijndael macros that use tables */
#define no_table(x,box,vf,rf,c) bytes2word( \
box[bval(vf(x,0,c),rf(0,c))], \
box[bval(vf(x,1,c),rf(1,c))], \
box[bval(vf(x,2,c),rf(2,c))], \
box[bval(vf(x,3,c),rf(3,c))])
#define one_table(x,op,tab,vf,rf,c) \
( tab[bval(vf(x,0,c),rf(0,c))] \
^ op(tab[bval(vf(x,1,c),rf(1,c))],1) \
^ op(tab[bval(vf(x,2,c),rf(2,c))],2) \
^ op(tab[bval(vf(x,3,c),rf(3,c))],3))
#define four_tables(x,tab,vf,rf,c) \
( tab[0][bval(vf(x,0,c),rf(0,c))] \
^ tab[1][bval(vf(x,1,c),rf(1,c))] \
^ tab[2][bval(vf(x,2,c),rf(2,c))] \
^ tab[3][bval(vf(x,3,c),rf(3,c))])
#define vf1(x,r,c) (x)
#define rf1(r,c) (r)
#define rf2(r,c) ((8+r-c)&3)
/* perform forward and inverse column mix operation on four bytes in long word x in */
/* parallel. NOTE: x must be a simple variable, NOT an expression in these macros. */
#if !(defined( REDUCE_CODE_SIZE ) && (defined( ASM_X86_V2 ) || defined( ASM_X86_V2C )))
#if defined( FM4_SET ) /* not currently used */
# define fwd_mcol(x) four_tables(x,t_use(f,m),vf1,rf1,0)
#elif defined( FM1_SET ) /* not currently used */
# define fwd_mcol(x) one_table(x,upr,t_use(f,m),vf1,rf1,0)
#else
# define dec_fmvars uint32_t g2
# define fwd_mcol(x) (g2 = gf_mulx(x), g2 ^ upr((x) ^ g2, 3) ^ upr((x), 2) ^ upr((x), 1))
#endif
#if defined( IM4_SET )
# define inv_mcol(x) four_tables(x,t_use(i,m),vf1,rf1,0)
#elif defined( IM1_SET )
# define inv_mcol(x) one_table(x,upr,t_use(i,m),vf1,rf1,0)
#else
# define dec_imvars uint32_t g2, g4, g9
# define inv_mcol(x) (g2 = gf_mulx(x), g4 = gf_mulx(g2), g9 = (x) ^ gf_mulx(g4), g4 ^= g9, \
(x) ^ g2 ^ g4 ^ upr(g2 ^ g9, 3) ^ upr(g4, 2) ^ upr(g9, 1))
#endif
#if defined( FL4_SET )
# define ls_box(x,c) four_tables(x,t_use(f,l),vf1,rf2,c)
#elif defined( LS4_SET )
# define ls_box(x,c) four_tables(x,t_use(l,s),vf1,rf2,c)
#elif defined( FL1_SET )
# define ls_box(x,c) one_table(x,upr,t_use(f,l),vf1,rf2,c)
#elif defined( LS1_SET )
# define ls_box(x,c) one_table(x,upr,t_use(l,s),vf1,rf2,c)
#else
# define ls_box(x,c) no_table(x,t_use(s,box),vf1,rf2,c)
#endif
#endif
#if defined( ASM_X86_V1C ) && defined( AES_DECRYPT ) && !defined( ISB_SET )
# define ISB_SET
#endif
#endif
Reference in New Issue View Git Blame Copy Permalink