|
|
|
@ -17,6 +17,7 @@
|
|
|
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#include <stdbool.h>
|
|
|
|
|
#include <stdint.h>
|
|
|
|
|
#include TREZOR_BOARD
|
|
|
|
|
#include "display_interface.h"
|
|
|
|
@ -24,11 +25,18 @@
|
|
|
|
|
#include "st7789v.h"
|
|
|
|
|
#include STM32_HAL_H
|
|
|
|
|
|
|
|
|
|
#ifdef TREZOR_MODEL_T
|
|
|
|
|
#include "displays/panels/LX154A2411.h"
|
|
|
|
|
#include "displays/panels/LX154A2422.h"
|
|
|
|
|
#include "displays/panels/tt_old1.h"
|
|
|
|
|
#include "displays/panels/tt_old2.h"
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
// using const volatile instead of #define results in binaries that change
|
|
|
|
|
// only in 1-byte when the flag changes.
|
|
|
|
|
// using #define leads compiler to over-optimize the code leading to bigger
|
|
|
|
|
// differencies in the resulting binaries.
|
|
|
|
|
const volatile uint8_t DISPLAY_ST7789V_INVERT_COLORS = 0;
|
|
|
|
|
const volatile uint8_t DISPLAY_ST7789V_INVERT_COLORS = 1;
|
|
|
|
|
|
|
|
|
|
// FSMC/FMC Bank 1 - NOR/PSRAM 1
|
|
|
|
|
#define DISPLAY_MEMORY_BASE 0x60000000
|
|
|
|
@ -103,6 +111,25 @@ static uint32_t display_identify(void) {
|
|
|
|
|
return id;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
bool display_is_inverted() {
|
|
|
|
|
bool inv_on = false;
|
|
|
|
|
uint32_t id = display_identify();
|
|
|
|
|
if (id == DISPLAY_ID_ST7789V) {
|
|
|
|
|
volatile uint8_t c = 0;
|
|
|
|
|
CMD(0x09); // read display status
|
|
|
|
|
c = *DISPLAY_DATA_ADDRESS; // don't care
|
|
|
|
|
c = *DISPLAY_DATA_ADDRESS; // don't care
|
|
|
|
|
c = *DISPLAY_DATA_ADDRESS; // don't care
|
|
|
|
|
c = *DISPLAY_DATA_ADDRESS;
|
|
|
|
|
if (c & 0x20) {
|
|
|
|
|
inv_on = true;
|
|
|
|
|
}
|
|
|
|
|
c = *DISPLAY_DATA_ADDRESS; // don't care
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return inv_on;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
void display_reset_state() {}
|
|
|
|
|
|
|
|
|
|
static void __attribute__((unused)) display_sleep(void) {
|
|
|
|
@ -240,263 +267,6 @@ int display_backlight(int val) {
|
|
|
|
|
return DISPLAY_BACKLIGHT;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void send_init_seq_GC9307(void) {
|
|
|
|
|
// Inter Register Enable1
|
|
|
|
|
CMD(0xFE);
|
|
|
|
|
|
|
|
|
|
// Inter Register Enable2
|
|
|
|
|
CMD(0xEF);
|
|
|
|
|
|
|
|
|
|
// TEON: Tearing Effect Line On; V-blanking only
|
|
|
|
|
CMD(0x35);
|
|
|
|
|
DATA(0x00);
|
|
|
|
|
|
|
|
|
|
// COLMOD: Interface Pixel format; 65K color: 16-bit/pixel (RGB 5-6-5 bits
|
|
|
|
|
// input)
|
|
|
|
|
CMD(0x3A);
|
|
|
|
|
DATA(0x55);
|
|
|
|
|
|
|
|
|
|
// Frame Rate
|
|
|
|
|
// CMD(0xE8); DATA(0x12); DATA(0x00);
|
|
|
|
|
|
|
|
|
|
// Power Control 2
|
|
|
|
|
CMD(0xC3);
|
|
|
|
|
DATA(0x27);
|
|
|
|
|
|
|
|
|
|
// Power Control 3
|
|
|
|
|
CMD(0xC4);
|
|
|
|
|
DATA(0x18);
|
|
|
|
|
|
|
|
|
|
// Power Control 4
|
|
|
|
|
CMD(0xC9);
|
|
|
|
|
DATA(0x1F);
|
|
|
|
|
|
|
|
|
|
CMD(0xC5);
|
|
|
|
|
DATA(0x0F);
|
|
|
|
|
|
|
|
|
|
CMD(0xC6);
|
|
|
|
|
DATA(0x00);
|
|
|
|
|
|
|
|
|
|
CMD(0xC7);
|
|
|
|
|
DATA(0x10);
|
|
|
|
|
|
|
|
|
|
CMD(0xC8);
|
|
|
|
|
DATA(0x01);
|
|
|
|
|
|
|
|
|
|
CMD(0xFF);
|
|
|
|
|
DATA(0x62);
|
|
|
|
|
|
|
|
|
|
CMD(0x99);
|
|
|
|
|
DATA(0x3E);
|
|
|
|
|
|
|
|
|
|
CMD(0x9D);
|
|
|
|
|
DATA(0x4B);
|
|
|
|
|
|
|
|
|
|
CMD(0x8E);
|
|
|
|
|
DATA(0x0F);
|
|
|
|
|
|
|
|
|
|
// SET_GAMMA1
|
|
|
|
|
CMD(0xF0);
|
|
|
|
|
DATA(0x8F);
|
|
|
|
|
DATA(0x1B);
|
|
|
|
|
DATA(0x05);
|
|
|
|
|
DATA(0x06);
|
|
|
|
|
DATA(0x07);
|
|
|
|
|
DATA(0x42);
|
|
|
|
|
|
|
|
|
|
// SET_GAMMA3
|
|
|
|
|
CMD(0xF2);
|
|
|
|
|
DATA(0x5C);
|
|
|
|
|
DATA(0x1F);
|
|
|
|
|
DATA(0x12);
|
|
|
|
|
DATA(0x10);
|
|
|
|
|
DATA(0x07);
|
|
|
|
|
DATA(0x43);
|
|
|
|
|
|
|
|
|
|
// SET_GAMMA2
|
|
|
|
|
CMD(0xF1);
|
|
|
|
|
DATA(0x59);
|
|
|
|
|
DATA(0xCF);
|
|
|
|
|
DATA(0xCF);
|
|
|
|
|
DATA(0x35);
|
|
|
|
|
DATA(0x37);
|
|
|
|
|
DATA(0x8F);
|
|
|
|
|
|
|
|
|
|
// SET_GAMMA4
|
|
|
|
|
CMD(0xF3);
|
|
|
|
|
DATA(0x58);
|
|
|
|
|
DATA(0xCF);
|
|
|
|
|
DATA(0xCF);
|
|
|
|
|
DATA(0x35);
|
|
|
|
|
DATA(0x37);
|
|
|
|
|
DATA(0x8F);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void send_init_seq_ST7789V(uint8_t invert_colors) {
|
|
|
|
|
// most recent manual:
|
|
|
|
|
// https://www.newhavendisplay.com/appnotes/datasheets/LCDs/ST7789V.pdf
|
|
|
|
|
// TEON: Tearing Effect Line On; V-blanking only
|
|
|
|
|
CMD(0x35);
|
|
|
|
|
DATA(0x00);
|
|
|
|
|
|
|
|
|
|
// COLMOD: Interface Pixel format; 65K color: 16-bit/pixel (RGB 5-6-5 bits
|
|
|
|
|
// input)
|
|
|
|
|
CMD(0x3A);
|
|
|
|
|
DATA(0x55);
|
|
|
|
|
|
|
|
|
|
// CMD2EN: Commands in command table 2 can be executed when EXTC level is Low
|
|
|
|
|
CMD(0xDF);
|
|
|
|
|
DATA(0x5A);
|
|
|
|
|
DATA(0x69);
|
|
|
|
|
DATA(0x02);
|
|
|
|
|
DATA(0x01);
|
|
|
|
|
|
|
|
|
|
// LCMCTRL: LCM Control: XOR RGB setting
|
|
|
|
|
CMD(0xC0);
|
|
|
|
|
DATA(0x20);
|
|
|
|
|
|
|
|
|
|
// GATECTRL: Gate Control; NL = 240 gate lines, first scan line is gate 80.;
|
|
|
|
|
// gate scan direction 319 -> 0
|
|
|
|
|
CMD(0xE4);
|
|
|
|
|
DATA(0x1D);
|
|
|
|
|
DATA(0x0A);
|
|
|
|
|
DATA(0x11);
|
|
|
|
|
|
|
|
|
|
// INVOFF (20h): Display Inversion Off
|
|
|
|
|
// INVON (21h): Display Inversion On
|
|
|
|
|
CMD(0x20 | invert_colors);
|
|
|
|
|
|
|
|
|
|
// the above config is the most important and definitely necessary
|
|
|
|
|
|
|
|
|
|
// PWCTRL1: Power Control 1
|
|
|
|
|
CMD(0xD0);
|
|
|
|
|
DATA(0xA4);
|
|
|
|
|
DATA(0xA1);
|
|
|
|
|
|
|
|
|
|
// gamma curve 1
|
|
|
|
|
// CMD(0xE0); DATA(0x70); DATA(0x2C); DATA(0x2E); DATA(0x15); DATA(0x10);
|
|
|
|
|
// DATA(0x09); DATA(0x48); DATA(0x33); DATA(0x53); DATA(0x0B); DATA(0x19);
|
|
|
|
|
// DATA(0x18); DATA(0x20); DATA(0x25);
|
|
|
|
|
|
|
|
|
|
// gamma curve 2
|
|
|
|
|
// CMD(0xE1); DATA(0x70);
|
|
|
|
|
// DATA(0x2C); DATA(0x2E); DATA(0x15); DATA(0x10); DATA(0x09); DATA(0x48);
|
|
|
|
|
// DATA(0x33); DATA(0x53); DATA(0x0B); DATA(0x19); DATA(0x18); DATA(0x20);
|
|
|
|
|
// DATA(0x25);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void send_init_seq_ILI9341V(void) {
|
|
|
|
|
// most recent manual: https://www.newhavendisplay.com/app_notes/ILI9341.pdf
|
|
|
|
|
// TEON: Tearing Effect Line On; V-blanking only
|
|
|
|
|
CMD(0x35);
|
|
|
|
|
DATA(0x00);
|
|
|
|
|
|
|
|
|
|
// COLMOD: Interface Pixel format; 65K color: 16-bit/pixel (RGB 5-6-5 bits
|
|
|
|
|
// input)
|
|
|
|
|
CMD(0x3A);
|
|
|
|
|
DATA(0x55);
|
|
|
|
|
|
|
|
|
|
// Display Function Control: gate scan direction 319 -> 0
|
|
|
|
|
CMD(0xB6);
|
|
|
|
|
DATA(0x0A);
|
|
|
|
|
DATA(0xC2);
|
|
|
|
|
DATA(0x27);
|
|
|
|
|
DATA(0x00);
|
|
|
|
|
|
|
|
|
|
// Interface Control: XOR BGR as ST7789V does
|
|
|
|
|
CMD(0xF6);
|
|
|
|
|
DATA(0x09);
|
|
|
|
|
DATA(0x30);
|
|
|
|
|
DATA(0x00);
|
|
|
|
|
|
|
|
|
|
// the above config is the most important and definitely necessary
|
|
|
|
|
|
|
|
|
|
CMD(0xCF);
|
|
|
|
|
DATA(0x00);
|
|
|
|
|
DATA(0xC1);
|
|
|
|
|
DATA(0x30);
|
|
|
|
|
|
|
|
|
|
CMD(0xED);
|
|
|
|
|
DATA(0x64);
|
|
|
|
|
DATA(0x03);
|
|
|
|
|
DATA(0x12);
|
|
|
|
|
DATA(0x81);
|
|
|
|
|
|
|
|
|
|
CMD(0xE8);
|
|
|
|
|
DATA(0x85);
|
|
|
|
|
DATA(0x10);
|
|
|
|
|
DATA(0x7A);
|
|
|
|
|
|
|
|
|
|
CMD(0xF7);
|
|
|
|
|
DATA(0x20);
|
|
|
|
|
|
|
|
|
|
CMD(0xEA);
|
|
|
|
|
DATA(0x00);
|
|
|
|
|
DATA(0x00);
|
|
|
|
|
|
|
|
|
|
// power control VRH[5:0]
|
|
|
|
|
CMD(0xC0);
|
|
|
|
|
DATA(0x23);
|
|
|
|
|
|
|
|
|
|
// power control SAP[2:0] BT[3:0]
|
|
|
|
|
CMD(0xC1);
|
|
|
|
|
DATA(0x12);
|
|
|
|
|
|
|
|
|
|
// vcm control 1
|
|
|
|
|
CMD(0xC5);
|
|
|
|
|
DATA(0x60);
|
|
|
|
|
DATA(0x44);
|
|
|
|
|
|
|
|
|
|
// vcm control 2
|
|
|
|
|
CMD(0xC7);
|
|
|
|
|
DATA(0x8A);
|
|
|
|
|
|
|
|
|
|
// framerate
|
|
|
|
|
CMD(0xB1);
|
|
|
|
|
DATA(0x00);
|
|
|
|
|
DATA(0x18);
|
|
|
|
|
|
|
|
|
|
// 3 gamma func disable
|
|
|
|
|
CMD(0xF2);
|
|
|
|
|
DATA(0x00);
|
|
|
|
|
|
|
|
|
|
// gamma curve 1
|
|
|
|
|
CMD(0xE0);
|
|
|
|
|
DATA(0x0F);
|
|
|
|
|
DATA(0x2F);
|
|
|
|
|
DATA(0x2C);
|
|
|
|
|
DATA(0x0B);
|
|
|
|
|
DATA(0x0F);
|
|
|
|
|
DATA(0x09);
|
|
|
|
|
DATA(0x56);
|
|
|
|
|
DATA(0xD9);
|
|
|
|
|
DATA(0x4A);
|
|
|
|
|
DATA(0x0B);
|
|
|
|
|
DATA(0x14);
|
|
|
|
|
DATA(0x05);
|
|
|
|
|
DATA(0x0C);
|
|
|
|
|
DATA(0x06);
|
|
|
|
|
DATA(0x00);
|
|
|
|
|
|
|
|
|
|
// gamma curve 2
|
|
|
|
|
CMD(0xE1);
|
|
|
|
|
DATA(0x00);
|
|
|
|
|
DATA(0x10);
|
|
|
|
|
DATA(0x13);
|
|
|
|
|
DATA(0x04);
|
|
|
|
|
DATA(0x10);
|
|
|
|
|
DATA(0x06);
|
|
|
|
|
DATA(0x25);
|
|
|
|
|
DATA(0x26);
|
|
|
|
|
DATA(0x3B);
|
|
|
|
|
DATA(0x04);
|
|
|
|
|
DATA(0x0B);
|
|
|
|
|
DATA(0x0A);
|
|
|
|
|
DATA(0x33);
|
|
|
|
|
DATA(0x39);
|
|
|
|
|
DATA(0x0F);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
void display_init_seq(void) {
|
|
|
|
|
HAL_GPIO_WritePin(GPIOC, GPIO_PIN_14, GPIO_PIN_RESET); // LCD_RST/PC14
|
|
|
|
|
// wait 10 milliseconds. only needs to be low for 10 microseconds.
|
|
|
|
@ -510,14 +280,22 @@ void display_init_seq(void) {
|
|
|
|
|
HAL_Delay(120);
|
|
|
|
|
|
|
|
|
|
// identify the controller we will communicate with
|
|
|
|
|
#ifdef TREZOR_MODEL_T
|
|
|
|
|
uint32_t id = display_identify();
|
|
|
|
|
if (id == DISPLAY_ID_GC9307) {
|
|
|
|
|
send_init_seq_GC9307();
|
|
|
|
|
tt_old1_init_seq();
|
|
|
|
|
} else if (id == DISPLAY_ID_ST7789V) {
|
|
|
|
|
send_init_seq_ST7789V(DISPLAY_ST7789V_INVERT_COLORS);
|
|
|
|
|
if (DISPLAY_ST7789V_INVERT_COLORS) {
|
|
|
|
|
lx154a2422_init_seq();
|
|
|
|
|
} else {
|
|
|
|
|
lx154a2411_init_seq();
|
|
|
|
|
}
|
|
|
|
|
} else if (id == DISPLAY_ID_ILI9341V) {
|
|
|
|
|
send_init_seq_ILI9341V();
|
|
|
|
|
tt_old2_init_seq();
|
|
|
|
|
}
|
|
|
|
|
#else
|
|
|
|
|
DISPLAY_PANEL_INIT_SEQ();
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
display_unsleep();
|
|
|
|
|
}
|
|
|
|
@ -684,6 +462,14 @@ void display_reinit(void) {
|
|
|
|
|
TIM1->CR2 |= TIM_CR2_CCPC;
|
|
|
|
|
TIM1->CCR1 = pwm_period * prev_val / 255;
|
|
|
|
|
TIM1->ARR = LED_PWM_TIM_PERIOD - 1;
|
|
|
|
|
|
|
|
|
|
#ifdef TREZOR_MODEL_T
|
|
|
|
|
uint32_t id = display_identify();
|
|
|
|
|
if (id == DISPLAY_ID_ST7789V && display_is_inverted()) {
|
|
|
|
|
// newest TT display - set proper gamma
|
|
|
|
|
lx154a2422_gamma();
|
|
|
|
|
}
|
|
|
|
|
#endif
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
void display_sync(void) {
|
|
|
|
|