arno/trezor-firmware
1
0
Fork 0
mirror of https://github.com/trezor/trezor-firmware.git synced 2024-11-26 09:28:13 +00:00
Code Issues Releases Wiki Activity

embed/trezorhal: only poll CTPM when touch is detected

Browse Source 
Because CTPM dislikes being polled when no touches are seen, keeps
resetting, and maybe freezes once in a while. This is very likely a fix
for #334.

Before, we would simply read the touch registers on every loop. Now we
first check whether the interrupt line is down, which indicates that the
CTPM has data to tell us.

Tracking the `touching` flag is necessary, as sometimes we don't poll
frequently enough to catch the TOUCH_END event before interrupt line
goes up again.
The `last_packet` handling miiight not be necessary - AFAICT, the CTPM
has some sort of buffer and always returns TOUCH_START at first and
TOUCH_END at last. Still, better safe than sorry.
This commit is contained in:
matejcik 2018-11-22 16:08:57 +01:00 committed by Jan Pochyla
parent 72bc784f7f
commit c3112fd83d
1 changed files with 33 additions and 10 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

43
embed/trezorhal/touch_t.h
View File

@ -121,9 +121,32 @@ void touch_power_off(void) {
touch_default_pin_state();
}
uint32_t touch_is_detected(void)
{
// check the interrupt line coming in from the CTPM.
// the line goes low when a touch event is actively detected.
// reference section 1.2 of "Application Note for FT6x06 CTPM".
// we configure the touch controller to use "interrupt polling mode".
return GPIO_PIN_RESET == HAL_GPIO_ReadPin(GPIOC, GPIO_PIN_4);
}
uint32_t touch_read(void)
{
static uint8_t touch_data[TOUCH_PACKET_SIZE], previous_touch_data[TOUCH_PACKET_SIZE];
static uint32_t xy;
static int touching;
int last_packet = 0;
if (!touch_is_detected()) {
// only poll when the touch interrupt is active.
// when it's inactive, we might need to read one last data packet to get to
// the TOUCH_END event, which clears the `touching` flag.
if (touching) {
last_packet = 1;
} else {
return 0;
}
}
uint8_t outgoing[] = {0x00}; // start reading from address 0x00
if (HAL_OK != HAL_I2C_Master_Transmit(&i2c_handle, TOUCH_ADDRESS, outgoing, sizeof(outgoing), 1)) {
@ -143,24 +166,24 @@ uint32_t touch_read(void)
const uint32_t number_of_touch_points = touch_data[2] & 0x0F; // valid values are 0, 1, 2 (invalid 0xF before first touch) (tested with FT6206)
const uint32_t event_flag = touch_data[3] & 0xC0;
if (touch_data[1] == GESTURE_NO_GESTURE) {
uint32_t xy = touch_pack_xy((X_POS_MSB << 8) | X_POS_LSB, (Y_POS_MSB << 8) | Y_POS_LSB);
xy = touch_pack_xy((X_POS_MSB << 8) | X_POS_LSB, (Y_POS_MSB << 8) | Y_POS_LSB);
if ((number_of_touch_points == 1) && (event_flag == EVENT_PRESS_DOWN)) {
touching = 1;
return TOUCH_START | xy;
} else if ((number_of_touch_points == 1) && (event_flag == EVENT_CONTACT)) {
return TOUCH_MOVE | xy;
} else if ((number_of_touch_points == 0) && (event_flag == EVENT_LIFT_UP)) {
touching = 0;
return TOUCH_END | xy;
}
}
if (last_packet) {
// interrupt line is inactive, we didn't read valid touch data, and as far as
// we know, we never sent a TOUCH_END event.
touching = 0;
return TOUCH_END | xy;
}
return 0;
}
uint32_t touch_is_detected(void)
{
// check the interrupt line coming in from the CTPM.
// the line goes low when a touch event is actively detected.
// reference section 1.2 of "Application Note for FT6x06 CTPM".
// we configure the touch controller to use "interrupt polling mode".
return GPIO_PIN_RESET == HAL_GPIO_ReadPin(GPIOC, GPIO_PIN_4);
}