trezor-firmware/embed/trezorhal/usb_hid-defs.h

/*
 * Copyright (c) Jan Pochyla, SatoshiLabs
 *
 * Licensed under TREZOR License
 * see LICENSE file for details
 */

typedef struct __attribute__((packed)) {
    uint8_t bLength;
    uint8_t bDescriptorType;
    uint16_t bcdHID;
    uint8_t bCountryCode;
    uint8_t bNumDescriptors;
    uint8_t bReportDescriptorType;
    uint16_t wReportDescriptorLength;
} usb_hid_descriptor_t;

typedef struct __attribute__((packed)) {
    usb_interface_descriptor_t iface;
    usb_hid_descriptor_t hid;
    usb_endpoint_descriptor_t ep_in;
    usb_endpoint_descriptor_t ep_out;
} usb_hid_descriptor_block_t;

/* usb_hid_info_t contains all information for setting up a HID interface.  All
 * passed pointers need to live at least until the interface is disabled
 * (usb_stop is called). */
typedef struct {
    const uint8_t *report_desc; // With length of report_desc_len bytes
    uint8_t *rx_buffer;         // With length of max_packet_len bytes
    uint8_t iface_num;          // Address of this HID interface
    uint8_t ep_in;              // Address of IN endpoint (with the highest bit set)
    uint8_t ep_out;             // Address of OUT endpoint
    uint8_t subclass;           // usb_iface_subclass_t
    uint8_t protocol;           // usb_iface_protocol_t
    uint8_t polling_interval;   // In units of 1ms
    uint8_t max_packet_len;     // Length of the biggest report and of rx_buffer
    uint8_t report_desc_len;    // Length of report_desc
} usb_hid_info_t;

/* usb_hid_state_t encapsulates all state used by enabled HID interface.  It
 * needs to be completely initialized in usb_hid_add and reset in
 * usb_hid_class_init.  See usb_hid_info_t for details of the configuration
 * fields. */
typedef struct {
    const usb_hid_descriptor_block_t *desc_block;
    const uint8_t *report_desc;
    uint8_t *rx_buffer;
    uint8_t ep_in;
    uint8_t ep_out;
    uint8_t max_packet_len;
    uint8_t report_desc_len;

    uint8_t protocol;      // For SET_PROTOCOL/GET_PROTOCOL setup reqs
    uint8_t idle_rate;     // For SET_IDLE/GET_IDLE setup reqs
    uint8_t alt_setting;   // For SET_INTERFACE/GET_INTERFACE setup reqs
    uint8_t last_read_len; // Length of data read into rx_buffer
    uint8_t ep_in_is_idle; // Set to 1 after IN endpoint gets idle
} usb_hid_state_t;

secbool __wur usb_hid_add(const usb_hid_info_t *hid_info);
secbool __wur usb_hid_can_read(uint8_t iface_num);
secbool __wur usb_hid_can_write(uint8_t iface_num);
int __wur usb_hid_read(uint8_t iface_num, uint8_t *buf, uint32_t len);
int __wur usb_hid_write(uint8_t iface_num, const uint8_t *buf, uint32_t len);

int __wur usb_hid_read_select(uint32_t timeout);
int __wur usb_hid_read_blocking(uint8_t iface_num, uint8_t *buf, uint32_t len, int timeout);
int __wur usb_hid_write_blocking(uint8_t iface_num, const uint8_t *buf, uint32_t len, int timeout);