1
0
mirror of https://github.com/trezor/trezor-firmware.git synced 2024-12-23 14:58:09 +00:00
trezor-firmware/embed/trezorhal/usb_webusb-defs.h

70 lines
2.9 KiB
C
Raw Normal View History

/*
2018-02-26 13:06:10 +00:00
* This file is part of the TREZOR project, https://trezor.io/
*
2018-02-26 13:06:10 +00:00
* Copyright (c) SatoshiLabs
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#define USB_WEBUSB_VENDOR_CODE 0x01 // arbitrary
#define USB_WEBUSB_LANDING_PAGE 0x01 // arbitrary
typedef struct __attribute__((packed)) {
usb_interface_descriptor_t iface;
usb_endpoint_descriptor_t ep_in;
usb_endpoint_descriptor_t ep_out;
} usb_webusb_descriptor_block_t;
/* usb_webusb_info_t contains all information for setting up a WebUSB interface.
* All passed pointers need to live at least until the interface is disabled
* (usb_stop is called). */
typedef struct {
uint8_t *rx_buffer; // With length of max_packet_len bytes
uint8_t iface_num; // Address of this WebUSB interface
uint8_t ep_in; // Address of IN endpoint (with the highest bit set)
uint8_t ep_out; // Address of OUT endpoint
uint8_t subclass; // usb_iface_subclass_t
uint8_t protocol; // usb_iface_protocol_t
uint8_t polling_interval; // In units of 1ms
uint8_t max_packet_len; // Length of the biggest report and of rx_buffer
} usb_webusb_info_t;
/* usb_webusb_state_t encapsulates all state used by enabled WebUSB interface.
* It needs to be completely initialized in usb_webusb_add and reset in
* usb_webusb_class_init. See usb_webusb_info_t for details of the
* configuration fields. */
typedef struct {
const usb_webusb_descriptor_block_t *desc_block;
uint8_t *rx_buffer;
uint8_t ep_in;
uint8_t ep_out;
uint8_t max_packet_len;
uint8_t alt_setting; // For SET_INTERFACE/GET_INTERFACE setup reqs
uint8_t last_read_len; // Length of data read into rx_buffer
uint8_t ep_in_is_idle; // Set to 1 after IN endpoint gets idle
} usb_webusb_state_t;
secbool __wur usb_webusb_add(const usb_webusb_info_t *webusb_info);
secbool __wur usb_webusb_can_read(uint8_t iface_num);
secbool __wur usb_webusb_can_write(uint8_t iface_num);
int __wur usb_webusb_read(uint8_t iface_num, uint8_t *buf, uint32_t len);
int __wur usb_webusb_write(uint8_t iface_num, const uint8_t *buf, uint32_t len);
int __wur usb_webusb_read_select(uint32_t timeout);
int __wur usb_webusb_read_blocking(uint8_t iface_num, uint8_t *buf,
uint32_t len, int timeout);
int __wur usb_webusb_write_blocking(uint8_t iface_num, const uint8_t *buf,
uint32_t len, int timeout);