TO BE REMOVED

Full article: https://docs.pi-hole.net/guides/vpn/openvpn/overview/

This optional section walks through providing IPv6 connectivity outside and inside the tunnel.

Optional: IPv6 outside the tunnel

To connect to your server over ipv6 (ipv6 transport) use this on both sides, e.g.

proto udp6

Optional: IPv6 inside the tunnel

In this document, we'll assume you have the following from the OpenVPN server's viewpoint:

The OpenVPN server has an IPv6 IP of 2001:db8:0:abc::100/64 on its LAN interface
The following block is routed to the OpenVPN server host: 2001:db8:0:123::/64

Note: This section is work in progress

Edit /etc/sysctl.conf

# Uncomment the next line to enable packet forwarding for IPv6
#  Enabling this option disables Stateless Address Autoconfiguration
#  based on Router Advertisements for this host
net.ipv6.conf.all.forwarding=1

Add the following to a functioning OpenVPN config:

server-ipv6 2001:db8:0:123::/64

Pushing routes over the tunnel works much like it does in IPv4, but you use push "route-ipv6 NETWORK/CIDR".

To redirect all Internet-bound traffic, use the current allocated public IP space like this:

push "route-ipv6 2000::/3"