17 KiB
Paging
Introduction
In the fifth part of the series Linux kernel booting process we finished to learn what and how kernel does on the earliest stage. In the next step kernel will initialize different things like initrd mounting, lockdep initialization, and many many different things, before we can see how the kernel will run the first init process.
Yeah, there will be many different things, but many many and once again many work with memory.
In my view, memory management is one of the most complex part of the linux kernel and in system programming generally. So before we will proceed with the kernel initialization stuff, we will get acquainted with the paging.
Paging is a process of translaion a linear memory address to a physical address. If you have read previous parts, you can remember that we saw segmentation in the real mode when physical address calculated by shifting a segment register on four and adding offset. Or also we saw segmentation in the protected mode, where we used the tables of descriptors and base addresses from descriptors with offsets to calculate physical addresses. Now we are in 64-bit mode and that we will see paging.
As intel manual says:
Paging provides a mech-anism for implementing a conventional demand-paged,
virtual-memory system where sections of a program’s execution environment are
mapped into physical memory as needed.
So... I will try to explain how paging works in theory in this post. Of course it will be closely related with the linux kernel for x86_64, but we will not go into deep details (at least in this post).
Enabling paging
There are three three paging modes:
- 32-bit paging;
- PAE paging;
- IA-32e paging.
We will see explanation only last mode here. To enable IA-32e paging paging mode need to do following things:
- set
CR0.PGbit; - set
CR4.PAEbit; - set
IA32_EFER.LMEbit.
We already saw setting of this bits in the arch/x86/boot/compressed/head_64.S:
movl $(X86_CR0_PG | X86_CR0_PE), %eax
movl %eax, %cr0
and
movl $MSR_EFER, %ecx
rdmsr
btsl $_EFER_LME, %eax
wrmsr
Paging structures
Paging divides the linear address space into fixed-size pages. Pages can be mapped into the physical address space or even external storage. This fixed size is 4096 bytes for the x86_64 linux kernel. For a linear address translation to a physical address used special structures. Every structure is 4096 bytes size and contains 512 entries (this only for PAE and IA32_EFER.LME modes). Paging structures are hierarchial and linux kernel for x86_64 uses 4 level paging. CPU uses a part of the linear address to identify entry of the another paging structure which is at the lower level or physical memory region (page frame) or physical address in this region (page offset). The address of the top level paging structure located in the cr3 register. We already saw this in the arch/x86/boot/compressed/head_64.S:
leal pgtable(%ebx), %eax
movl %eax, %cr3
We built page table structures and put the address of the top-level structure to the cr3 register. Here cr3 is used to store the address of the top-level PML4 structure or Page Global Directory as it calls in linux kernel. cr3 is 64-bit register and has the following structure:
63 52 51 32
--------------------------------------------------------------------------------
| | |
| Reserved MBZ | Address of the top level structure |
| | |
--------------------------------------------------------------------------------
31 12 11 5 4 3 2 0
--------------------------------------------------------------------------------
| | | P | P | |
| Address of the top level structure | Reserved | C | W | Reserved |
| | | D | T | |
--------------------------------------------------------------------------------
These fiealds have the following meanings:
- Bits 2:0 - ignored;
- Bits 51:12 - stores the address of the top level paging structure;
- Bit 3 and 4 - PWT or Page-Level Writethrough and PCD or Page-level cache disable indicate. These bits control the way the page or Page Table is handled by the hardware cache;
- Reserved - reserved must be 0;
- Bits 63:52 - reserved must be 0.
The linear address tranlation address is following:
- Given linear address arrives to the MMU instead of memory bus.
- 64-bit linear address splits on some parts. Only low 48 bits are significant, it means that
2^48or 256 TBytes of linear-address space may be accessed at any given time. cr3register stores the address of the 4 top-level paging structure.47:39bits of the given linear address stores an index into the paging structure level-4,38:30bits stores index into the paging structure level-3,29:21bits stores an index into the paging structure level-2,20:12bits stores an index into the paging structure level-1 and11:0bits provide the byte offset into the physical page.
schematically, we can imagine it like this:
Every access to a linear address is either a supervisor-mode access or a user-mode access. This access determined by the CPL (current privilege level). If CPL < 3 it is a supervisor mode access level and user mode access level in other ways. For example top level page table entry contains access bits and has the following structure:
63 62 52 51 32
--------------------------------------------------------------------------------
| N | | |
| | Available | Address of the paging structure on lower level |
| X | | |
--------------------------------------------------------------------------------
31 12 11 9 8 7 6 5 4 3 2 1 0
--------------------------------------------------------------------------------
| | | M |I| | P | P |U|W| |
| Address of the paging structure on lower level | AVL | B |G|A| C | W | | | P |
| | | Z |N| | D | T |S|R| |
--------------------------------------------------------------------------------
Where:
- 63 bit - N/X bit (No Execute Bit) - presents ability to execute the code from physical pages mapped by the table entry;
- 62:52 bits - ignored by CPU, used by system software;
- 51:12 bits - stores physical address of the lower level paging structure;
- 12:9 bits - ignored by CPU;
- MBZ - must be zero bits;
- Ignored bits;
- A - accessed bit indicates was physical page or page structure accessed;
- PWT and PCD used for cache;
- U/S - user/superviso bit contols user access to the all physical pages mapped by this table entry;
- R/W - read/write bit controls read/write access to the all physical pages mapped by this table entry;
- P - present bit. Current bit indicates was page table or physical page loaded into primary memory or not.
Ok, now we know about paging structures and it's entries. Let's see some details about 4-level paging in linux kernel.
Paging structures in linux kernel
As i wrote about linux kernel for x86_64 uses 4-level page tables. Their names are:
- Page Global Directory
- Page Upper Directory
- Page Middle Directory
- Page Table Entry
After that you compiled and installed linux kernel, you can note System.map file which stores address of the functions whic are used by the kernel. Note that addresses are virtual. For example:
$ grep "start_kernel" System.map
ffffffff81efe497 T x86_64_start_kernel
ffffffff81efeaa2 T start_kernel
We can see 0xffffffff81efe497 here. I'm not sure that you have so big RAM. But anyway start_kernel and x86_64_start_kernel will be executed. The address space in x86_64 is 2^64 size, but it's too large, that's why used smaller address space, only 48-bits wide. So we have situation when physical address limited with 48 bits, but addressing still performed with 64 bit pointers. How to solve this problem? Ok, look on the diagram:
0xffffffffffffffff +-----------+
| |
| | Kernelspace
0xffff800000000000 | |
+-----------+
| |
| |
| HOLE |
| |
| |
0x00007fffffffffff +-----------+
| |
| | Userspace
| |
0x0000000000000000 +-----------+
This solution is sign extension. Here we can see that low 48 bits of a virtual address can be used for addressing. Bits 63:48 can be or 0 or 1. Note that all virtual address space is spliten on 2 parts:
- Kernel space
- Userspace
Userspace occupies the lower part of the virtual address space, from 0x000000000000000 to 0x00007fffffffffff and kernel space occupies the highest part from the 0xffff8000000000 to 0xffffffffffffffff. Note that bits 63:48 is 0 for userspace and 1 for kernel space. All addresses which are in kernel space and in userspace or in another words which higher 63:48 bits zero or one calls canonical addresses. There is non-canonical area between these memory regions. Together this two memory regions (kernel space and user space) are exactly 2^48 bits. We can find virtual memory map with 4 level page tables in the Documentation/x86/x86_64/mm.txt:
0000000000000000 - 00007fffffffffff (=47 bits) user space, different per mm
hole caused by [48:63] sign extension
ffff800000000000 - ffff87ffffffffff (=43 bits) guard hole, reserved for hypervisor
ffff880000000000 - ffffc7ffffffffff (=64 TB) direct mapping of all phys. memory
ffffc80000000000 - ffffc8ffffffffff (=40 bits) hole
ffffc90000000000 - ffffe8ffffffffff (=45 bits) vmalloc/ioremap space
ffffe90000000000 - ffffe9ffffffffff (=40 bits) hole
ffffea0000000000 - ffffeaffffffffff (=40 bits) virtual memory map (1TB)
... unused hole ...
ffffec0000000000 - fffffc0000000000 (=44 bits) kasan shadow memory (16TB)
... unused hole ...
ffffff0000000000 - ffffff7fffffffff (=39 bits) %esp fixup stacks
... unused hole ...
ffffffff80000000 - ffffffffa0000000 (=512 MB) kernel text mapping, from phys 0
ffffffffa0000000 - ffffffffff5fffff (=1525 MB) module mapping space
ffffffffff600000 - ffffffffffdfffff (=8 MB) vsyscalls
ffffffffffe00000 - ffffffffffffffff (=2 MB) unused hole
We can see here memory map for user space, kernel space and non-canonical area between. User space memory map is simple. Let's take a closer look on the kernel space. We can see that it starts from the guard hole which reserved for hypervisor. We can find definiton of this guad hole in the arch/x86/include/asm/page_64_types.h:
#define __PAGE_OFFSET _AC(0xffff880000000000, UL)
Previously this guard hole and __PAGE_OFFSET was from 0xffff800000000000 to 0xffff80ffffffffff for preventing of access to non-canonical area, but later was added 3 bits for hypervisor.
Next is the lowest usable address in kernel space - ffff880000000000. This virtual memory region is for direct mapping of the all physical memory. After the memory space which mapped all physical address - guard hole, it needs to be between direct mapping of the all physical memory and vmalloc area. After the virtual memory map for the first terabyte and unused hole after it, we can see kasan shadow memory. It was added by the commit and provides kernel address sanitizer. After next unused hole we can se esp fixup stacks (we will talk about it in the other parts) and the start of the kernel text mapping from the physical address - 0. We can find definition of this address in the same file as the __PAGE_OFFSET:
#define __START_KERNEL_map _AC(0xffffffff80000000, UL)
Usually kernel's .text start here with the CONFIG_PHYSICAL_START offset. We saw it in the post about ELF64:
readelf -s vmlinux | grep ffffffff81000000
1: ffffffff81000000 0 SECTION LOCAL DEFAULT 1
65099: ffffffff81000000 0 NOTYPE GLOBAL DEFAULT 1 _text
90766: ffffffff81000000 0 NOTYPE GLOBAL DEFAULT 1 startup_64
Here i checked vmlinux with the CONFIG_PHYSICAL_START is 0x1000000. So we have the start point of the kernel .text - 0xffffffff80000000 and offset - 0x1000000, the resulted virtual address will be 0xffffffff80000000 + 1000000 = 0xffffffff81000000.
After the kernel .text region, we can see virtual memory region for kernel modules, vsyscalls and 2 megabytes unused hole.
We know how looks kernel's virtual memory map and now we can see how a virtual address translates into physical. Let's take for example following address:
0xffffffff81000000
In binary it will be:
0b1111111111111111111111111111111110000001000000000000000000000000
The given virtual address will be splitten on some parts as i wrote above:
63:48- bits not used;47:39- bits of the given linear address stores an index into the paging structure level-4;38:30- bits stores index into the paging structure level-3;29:21- bits stores an index into the paging structure level-2;20:12- bits stores an index into the paging structure level-1;11:0- bits provide the byte offset into the physical page.
That is all. Now you know a little about paging theory and we can go ahed in the kernel source code and see first initialization steps.
Conclusion
It's the end of this short part about paging theory. Of cousre this post doesn't cover all details about paging, but soon we will see it on practice how linux kernel builds paging structures and work with it.
Please note that English is not my first language and I am really sorry for any inconvenience. If you found any mistakes please send me PR to linux-internals.