This is the fifth part of the `Kernel booting process` series. We saw transition to the 64-bit mode in the previous [part](https://github.com/0xAX/linux-insides/blob/master/Booting/linux-bootstrap-4.md#transition-to-the-long-mode) and we will continue from this point in this part. We will see the last steps before we jump to the kernel code as preparation for kernel decompression, relocation and directly kernel decompression. So... let's start to dive in the kernel code again.
We stopped right before the jump on the `64-bit` entry point - `startup_64` which is located in the [arch/x86/boot/compressed/head_64.S](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/boot/compressed/head_64.S) source code file. We already saw the jump to the `startup_64` in the `startup_32`:
in the previous part. Since we loaded the new `Global Descriptor Table` and there was CPU transition in other mode (`64-bit` mode in our case), we can see the setup of the data segments:
The `rbp` contains the decompressed kernel start address and after this code executes `rbx` register will contain address to relocate the kernel code for decompression. We already saw code like this in the `startup_32` ( you can read about it in the previous part - [Calculate relocation address](https://github.com/0xAX/linux-insides/blob/master/Booting/linux-bootstrap-4.md#calculate-relocation-address)), but we need to do this calculation again because the bootloader can use 64-bit boot protocol and `startup_32` just will not be executed in this case.
As you can see above, the `rbx` register contains the start address of the kernel decompressor code and we just put this address with `boot_stack_end` offset to the `rsp` register which represents pointer to the top of the stack. After this step, the stack will be correct. You can find definition of the `boot_stack_end` in the end of [arch/x86/boot/compressed/head_64.S](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/boot/compressed/head_64.S) assembly source code file:
It located in the end of the `.bss` section, right before the `.pgtable`. If you will look into [arch/x86/boot/compressed/vmlinux.lds.S](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/boot/compressed/vmlinux.lds.S) linker script, you will find Definition of the `.bss` and `.pgtable` there.
As we set the stack, now we can copy the compressed kernel to the address that we got above, when we calculated the relocation address of the decompressed kernel. Before details, let's look at this assembly code:
First of all we push `rsi` to the stack. We need preserve the value of `rsi`, because this register now stores a pointer to the `boot_params` which is real mode structure that contains booting related data (you must remember this structure, we filled it in the start of kernel setup). In the end of this code we'll restore the pointer to the `boot_params` into `rsi` again.
The next two `leaq` instructions calculates effective addresses of the `rip` and `rbx` with `_bss - 8` offset and put it to the `rsi` and `rdi`. Why do we calculate these addresses? Actually the compressed kernel image is located between this copying code (from `startup_32` to the current code) and the decompression code. You can verify this by looking at the linker script - [arch/x86/boot/compressed/vmlinux.lds.S](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/boot/compressed/vmlinux.lds.S):
And `.rodata..compressed` contains the compressed kernel image. So `rsi` will contain the absolute address of `_bss - 8`, and `rdi` will contain the relocation relative address of `_bss - 8`. As we store these addresses in registers, we put the address of `_bss` in the `rcx` register. As you can see in the `vmlinux.lds.S` linker script, it's located at the end of all sections with the setup/kernel code. Now we can start to copy data from `rsi` to `rdi`, `8` bytes at the time, with the `movsq` instruction.
Note that there is an `std` instruction before data copying: it sets the `DF` flag, which means that `rsi` and `rdi` will be decremented. In other words, we will copy the bytes backwards. At the end, we clear the `DF` flag with the `cld` instruction, and restore `boot_params` structure to `rsi`.
In the previous paragraph we saw that the `.text` section starts with the `relocated` label. The first thing it does is clearing the `bss` section with:
We need to initialize the `.bss` section, because we'll soon jump to [C](https://en.wikipedia.org/wiki/C_%28programming_language%29) code. Here we just clear `eax`, put the address of `_bss` in `rdi` and `_ebss` in `rcx`, and fill it with zeros with the `rep stosq` instruction.
Again we set `rdi` to a pointer to the `boot_params` structure and preserve it on the stack. In the same time we set `rsi` to point to the area which should be usedd for kernel uncompression. The last step is preparation of the `extract_kernel` parameters and call of this function which will uncompres the kernel. The `extract_kernel` function is defined in the [arch/x86/boot/compressed/misc.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/boot/compressed/misc.c) source code file and takes six arguments:
*`rmode` - pointer to the [boot_params](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973//arch/x86/include/uapi/asm/bootparam.h#L114) structure which is filled by bootloader or during early kernel initialization;
All arguments will be passed through the registers according to [System V Application Binary Interface](http://www.x86-64.org/documentation/abi.pdf). We've finished all preparation and can now look at the kernel decompression.
As we saw in previous paragraph, the `extract_kernel` function is defined in the [arch/x86/boot/compressed/misc.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/boot/compressed/misc.c) source code file and takes six arguments. This function starts with the video/console initialization that we already saw in the previous parts. We need to do this again because we don't know if we started in [real mode](https://en.wikipedia.org/wiki/Real_mode) or a bootloader was used, or whether the bootloader used the `32` or `64-bit` boot protocol.
where the `heap` is the second parameter of the `extract_kernel` function which we got in the [arch/x86/boot/compressed/head_64.S](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/boot/compressed/head_64.S):
After heap pointers initialization, the next step is the call of the `choose_random_location` function from [arch/x86/boot/compressed/kaslr.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/boot/compressed/kaslr.c#L425) source code file. As we can guess from the function name, it chooses the memory location where the kernel image will be decompressed. It may look weird that we need to find or even `choose` location where to decompress the compressed kernel image, but the Linux kernel supports [kASLR](https://en.wikipedia.org/wiki/Address_space_layout_randomization) which allows decompression of the kernel into a random address, for security reasons. Let's open the [arch/x86/boot/compressed/kaslr.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/boot/compressed/kaslr.c#L425) source code file and look at `choose_random_location`.
For now, let's assume the kernel was configured with randomization enabled and try to understand what `kASLR` is. We can find information about it in the [documentation](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/Documentation/kernel-parameters.txt):
It means that we can pass the `kaslr` option to the kernel's command line and get a random address for the decompressed kernel (you can read more about ASLR [here](https://en.wikipedia.org/wiki/Address_space_layout_randomization)). So, our current goal is to find random address where we can `safely` to decompress the Linux kernel. I repeat: `safely`. What does it mean in this context? You may remember that besides the code of decompressor and directly the kernel image, there are some unsafe places in memory. For example, the [initrd](https://en.wikipedia.org/wiki/Initrd) image is in memory too, and we must not overlap it with the decompressed kernel.
The next function will help us to build identity mappig pages to avoid non-safe places in RAM and decompress kernel. And after this we should find a safe place where we can decompress kernel. This function is `mem_avoid_init`. It defined in the same source code [file](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/boot/compressed/kaslr.c), and takes four arguments that we already saw in the `extract_kernel` function:
Here we can see calculation of the [initrd](http://en.wikipedia.org/wiki/Initrd) start address and size. The `ext_ramdisk_image` is the high `32-bits` of the `ramdisk_image` field from the setup header, and `ext_ramdisk_size` is the high 32-bits of the `ramdisk_size` field from the [boot protocol](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/Documentation/x86/boot.txt):
And `ext_ramdisk_image` and `ext_ramdisk_size` can be found in the [Documentation/x86/zero-page.txt](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/Documentation/x86/zero-page.txt):
So we're taking `ext_ramdisk_image` and `ext_ramdisk_size`, shifting them left on `32` (now they will contain low 32-bits in the high 32-bit bits) and getting start address of the `initrd` and size of it. After this we store these values in the `mem_avoid` array.
The next step after we've collected all unsafe memory regions in the `mem_avoid` array will be searching for a random address that does not overlap with the unsafe regions, using the `find_random_phys_addr` function.
First of all we can see the alignment of the output address in the `find_random_addr` function:
You can remember `CONFIG_PHYSICAL_ALIGN` configuration option from the previous part. This option provides the value to which kernel should be aligned and it is `0x200000` by default. Once we have the aligned output address, we go through the memory regions which we got with the help of the BIOS [e820](https://en.wikipedia.org/wiki/E820) service and collect regions suitable for the decompressed kernel image:
Recall that we collected `e820_entries` in the second part of the [Kernel booting process part 2](https://github.com/0xAX/linux-insides/blob/master/Booting/linux-bootstrap-2.md#memory-detection). The `process_e820_entries` function does some checks that an `e820` memory region is not `non-RAM`, that the start address of the memory region is not bigger than maximum allowed `aslr` offset, and that the memory region is above the minimum load location:
and calls the `process_mem_region` for acceptable memory regions. The `process_mem_region` function processes the given memory region and stores memory regions in the `slot_areas` array of `slot_area` structures which are defined.
After the `process_mem_region` is done, we will have an array of addresses that are safe for the decompressed kernel. Then we call `slots_fetch_random` function to get a random item from this array:
where the `kaslr_get_random_long` function checks different CPU flags as `X86_FEATURE_RDRAND` or `X86_FEATURE_TSC` and chooses a method for getting random number (it can be the RDRAND instruction, the time stamp counter, the programmable interval timer, etc...). After retrieving the random address, execution of the `choose_random_location` is finished.
Now let's back to [misc.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/boot/compressed/misc.c#L404). After getting the address for the kernel image, there need to be some checks to be sure that the retrieved random address is correctly aligned and address is not wrong.
and call the `__decompress` function which will decompress the kernel. The `__decompress` function depends on what decompression algorithm was chosen during kernel compilation:
After kernel is decompressed, the last two functions are `parse_elf` and `handle_relocations`. The main point of these functions is to move the uncompressed kernel image to the correct memory place. The fact is that the decompression will decompress [in-place](https://en.wikipedia.org/wiki/In-place_algorithm), and we still need to move kernel to the correct address. As we already know, the kernel image is an [ELF](https://en.wikipedia.org/wiki/Executable_and_Linkable_Format) executable, so the main goal of the `parse_elf` function is to move loadable segments to the correct address. We can see loadable segments in the output of the `readelf` program:
The goal of the `parse_elf` function is to load these segments to the `output` address we got from the `choose_random_location` function. This function starts with checking the [ELF](https://en.wikipedia.org/wiki/Executable_and_Linkable_Format) signature:
and if it's not valid, it prints an error message and halts. If we got a valid `ELF` file, we go through all program headers from the given `ELF` file and copy all loadable segments with correct address to the output buffer:
That's all. From now on, all loadable segments are in the correct place. Implementation of the last `handle_relocations` function depends on the `CONFIG_X86_NEED_RELOCS` kernel configuration option and if it is enabled, this function adjusts addresses in the kernel image, and is called only if the `kASLR` was enabled during kernel configuration.
After the kernel is relocated, we return back from the `extract_kernel` to [arch/x86/boot/compressed/head_64.S](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/boot/compressed/head_64.S). The address of the kernel will be in the `rax` register and we jump to it:
This is the end of the fifth and the last part about linux kernel booting process. We will not see posts about kernel booting anymore (maybe updates to this and previous posts), but there will be many posts about other kernel internals.
**Please note that English is not my first language, And I am really sorry for any inconvenience. If you find any mistakes please send me PR to [linux-insides](https://github.com/0xAX/linux-internals).**
