In the previous chapter, we introduced the basic elements of bitcoin transactions and looked at the most common type of transaction script, the Pay-to-Public-Key-Hash script. In this chapter we will look at more advanced scripting and how we can use them to build complex transactions, smart contracts and even overlay transaction networks on top of bitcoin.
First, we will look at _multi-signature_ scripts. Next we will examine the second most common transaction script, _Pay-to-Script-Hash_, which opens up a whole world of complex scripts. Then, we will examine new script operators that add a time-dimension to bitcoin, through _timelocks_. Then, we will look at a major architecture change in transactions called _Segregated Witness_. Finally, we will close with an overview of proposed future advancements in bitcoin scripting and transactions, such as _MAST_, _Confidential Transactions_, _Schnorr Signatures_ and _Covenants_.
((("multi-signature scripts")))((("transactions","multi-signature scripts")))Multi-signature scripts set a condition where N public keys are recorded in the script and at least M of those must provide signatures to release the encumbrance. This is also known as an M-of-N scheme, where N is the total number of keys and M is the threshold of signatures required for validation. For example, a 2-of-3 multi-signature is one where three public keys are listed as potential signers and at least two of those must be used to create signatures for a valid transaction to spend the funds. ((("multi-signature scripts","limits on")))At this time, standard multi-signature scripts are limited to at most 15 listed public keys, meaning you can do anything from a 1-of-1 to a 15-of-15 multi-signature or any combination within that range. The limitation to 15 listed keys might be lifted by the time this book is published, so check the((("isStandard() function"))) +isStandard()+ function to see what is currently accepted by the network.
The general form of a locking script setting an M-of-N multi-signature condition is:
----
M <Public Key 1> <Public Key 2> ... <Public Key N> N OP_CHECKMULTISIG
----
where N is the total number of listed public keys and M is the threshold of required signatures to spend the output.
A locking script setting a 2-of-3 multi-signature condition looks like this:
The preceding locking script can be satisfied with an unlocking script containing pairs of signatures and public keys:
----
OP_0 <Signature B> <Signature C>
----
or any combination of two signatures from the private keys corresponding to the three listed public keys.
[NOTE]
====
((("CHECKMULTISIG implementation")))The prefix +OP_0+ is required because of a bug in the original implementation of +CHECKMULTISIG+ where one item too many is popped off the stack. It is ignored by +CHECKMULTISIG+ and is simply a placeholder.
====
The two scripts together would form the combined validation script:
When executed, this combined script will evaluate to TRUE if, and only if, the unlocking script matches the conditions set by the locking script. In this case, the condition is whether the unlocking script has a valid signature from the two private keys that correspond to two of the three public keys set as an encumbrance.
[[p2sh]]
=== Pay-to-Script-Hash (P2SH)
((("multi-signature scripts","P2SH and", id="ix_ch05-asciidoc17", range="startofrange")))((("Pay-to-script-hash (P2SH)", id="ix_ch05-asciidoc18", range="startofrange")))((("transactions","Pay-to-script-hash", id="ix_ch05-asciidoc19", range="startofrange")))Pay-to-script-hash (P2SH) was introduced in 2012 as a powerful new type of transaction that greatly simplifies the use of complex transaction scripts. To explain the need for P2SH, let's look at a practical example.
In <<ch01_intro_what_is_bitcoin>> we introduced Mohammed, an electronics importer based in Dubai. Mohammed's company uses bitcoin's multi-signature feature extensively for its corporate accounts. Multi-signature scripts are one of the most common uses of bitcoin's advanced scripting capabilities and are a very powerful feature. Mohammed's company uses a multi-signature script for all customer payments, known in accounting terms as "accounts receivable," or AR. With the multi-signature scheme, any payments made by customers are locked in such a way that they require at least two signatures to release, from Mohammed and one of his partners or from his attorney who has a backup key. A multi-signature scheme like that offers corporate governance controls and protects against theft, embezzlement, or loss.
The resulting script is quite long and looks like this:
----
2 <Mohammed's Public Key> <Partner1 Public Key> <Partner2 Public Key> <Partner3 Public Key> <Attorney Public Key> 5 OP_CHECKMULTISIG
----
Although multi-signature scripts are a powerful feature, they are cumbersome to use. Given the preceding script, Mohammed would have to communicate this script to every customer prior to payment. Each customer would have to use special bitcoin wallet software with the ability to create custom transaction scripts, and each customer would have to understand how to create a transaction using custom scripts. Furthermore, the resulting transaction would be about five times larger than a simple payment transaction, because this script contains very long public keys. The burden of that extra-large transaction would be borne by the customer in the form of fees. Finally, a large transaction script like this would be carried in the UTXO set in RAM in every full node, until it was spent. All of these issues make using complex output scripts difficult in practice.
Pay-to-script-hash (P2SH) was developed to resolve these practical difficulties and to make the use of complex scripts as easy as a payment to a bitcoin address. With P2SH payments, the complex locking script is replaced with its digital fingerprint, a cryptographic hash. When a transaction attempting to spend the UTXO is presented later, it must contain the script that matches the hash, in addition to the unlocking script. In simple terms, P2SH means "pay to a script matching this hash, a script that will be presented later when this output is spent."
In P2SH transactions, the locking script that is replaced by a hash is referred to as the((("redeem script"))) _redeem script_ because it is presented to the system at redemption time rather than as a locking script. <<without_p2sh>> shows the script without P2SH and <<with_p2sh>> shows the same script encoded with P2SH.
As you can see from the tables, with P2SH the complex script that details the conditions for spending the output (redeem script) is not presented in the locking script. Instead, only a hash of it is in the locking script and the redeem script itself is presented later, as part of the unlocking script when the output is spent. This shifts the burden in fees and complexity from the sender to the recipient (spender) of the transaction.
Let's look at Mohammed's company, the complex multi-signature script, and the resulting P2SH scripts.
First, the multi-signature script that Mohammed's company uses for all incoming payments from customers:
----
2 <Mohammed's Public Key> <Partner1 Public Key> <Partner2 Public Key> <Partner3 Public Key> <Attorney Public Key> 5 OP_CHECKMULTISIG
----
If the placeholders are replaced by actual public keys (shown here as 520-bit numbers starting with 04) you can see that this script becomes very long:
This entire script can instead be represented by a 20-byte cryptographic hash, by first applying the SHA256 hashing algorithm and then applying the RIPEMD160 algorithm on the result. The 20-byte hash of the preceding script is:
----
54c557e07dde5bb6cb791c7a540e0a4796f5e97e
----
A P2SH transaction locks the output to this hash instead of the longer script, using the locking script:
which, as you can see, is much shorter. Instead of "pay to this 5-key multi-signature script," the P2SH equivalent transaction is "pay to a script with this hash." A customer making a payment to Mohammed's company need only include this much shorter locking script in his payment. When Mohammed wants to spend this UTXO, they must present the original redeem script (the one whose hash locked the UTXO) and the signatures necessary to unlock it, like this:
((("addresses, bitcoin","Pay-to-Script-Hash (P2SH)")))((("Pay-to-script-hash (P2SH)","addresses")))Another important part of the P2SH feature is the ability to encode a script hash as an address, as defined in BIP-13. P2SH addresses are Base58Check encodings of the 20-byte hash of a script, just like bitcoin addresses are Base58Check encodings of the 20-byte hash of a public key. P2SH addresses use the version prefix "5", which results in Base58Check-encoded addresses that start with a "3". For example, Mohammed's complex script, hashed and Base58Check-encoded as a P2SH address becomes +39RF6JqABiHdYHkfChV6USGMe6Nsr66Gzw+. Now, Mohammed can give this "address" to his customers and they can use almost any bitcoin wallet to make a simple payment, as if it were a bitcoin address. The 3 prefix gives them a hint that this is a special type of address, one corresponding to a script instead of a public key, but otherwise it works in exactly the same way as a payment to a bitcoin address.
P2SH addresses hide all of the complexity, so that the person making a payment does not see the script.
==== Benefits of pay-to-script-hash
((("Pay-to-script-hash (P2SH)","benefits of")))The pay-to-script-hash feature offers the following benefits compared to the direct use of complex scripts in locking outputs:
* Complex scripts are replaced by shorter fingerprints in the transaction output, making the transaction smaller.
* Scripts can be coded as an address, so the sender and the sender's wallet don't need complex engineering to implement P2SH.
* P2SH shifts the burden of constructing the script to the recipient, not the sender.
* P2SH shifts the burden in data storage for the long script from the output (which is in the UTXO set) to the input (stored on the blockchain).
* P2SH shifts the burden in data storage for the long script from the present time (payment) to a future time (when it is spent).
* P2SH shifts the transaction fee cost of a long script from the sender to the recipient, who has to include the long redeem script to spend it.
((("pay-to-script-hash (P2SH)","isStandard validation")))((("pay-to-script-hash (P2SH)","redeem script for")))Prior to version 0.9.2 of the Bitcoin Core client, pay-to-script-hash was limited to the standard types of bitcoin transaction scripts, by the +isStandard()+ function. That means that the redeem script presented in the spending transaction could only be one of the standard types: P2PK, P2PKH, or multi-sig nature, excluding +OP_RETURN+ and P2SH itself.
As of version 0.9.2 of the Bitcoin Core client, P2SH transactions can contain any valid script, making the P2SH standard much more flexible and allowing for experimentation with many novel and complex types of transactions.
Note that you are not able to put a P2SH inside a P2SH redeem script, because the P2SH specification is not recursive. You are also still not able to use +OP_RETURN+ in a redeem script because +OP_RETURN+ cannot be redeemed by definition.
Note that because the redeem script is not presented to the network until you attempt to spend a P2SH output, if you lock an output with the hash of an invalid transaction it will be processed regardless. However, you will not be able to spend it because the spending transaction, which includes the redeem script, will not be accepted because it is an invalid script. This creates a risk, because you can lock bitcoin in a P2SH that cannot be spent later. The network will accept the P2SH encumbrance even if it corresponds to an invalid redeem script, because the script hash gives no indication of the script it represents.
[WARNING]
====
((("Pay-to-Script-Hash (P2SH)","locking scripts")))P2SH locking scripts contain the hash of a redeem script, which gives no clues as to the content of the redeem script itself. The P2SH transaction will be considered valid and accepted even if the redeem script is invalid. You might accidentally lock bitcoin in such a way that it cannot later be spent.(((range="endofrange", startref="ix_ch05-asciidoc19")))(((range="endofrange", startref="ix_ch05-asciidoc18")))(((range="endofrange", startref="ix_ch05-asciidoc17")))(((range="endofrange", startref="ix_ch05-asciidoc0")))
((("ledger, storing unrelated information in")))((("OP_RETURN operator")))((("transactions","storing unrelated information in")))Bitcoin's distributed and timestamped ledger, the blockchain, has potential uses far beyond payments. Many developers have tried to use the transaction scripting language to take advantage of the security and resilience of the system for applications such as((("digital notary services")))((("smart contracts")))((("stock certificates"))) digital notary services, stock certificates, and smart contracts. Early attempts to use bitcoin's script language for these purposes involved creating transaction outputs that recorded data on the blockchain; for example, to record a digital fingerprint of a file in such a way that anyone could establish proof-of-existence of that file on a specific date by reference to that transaction.
((("blockchains","storing unrelated information in")))The use of bitcoin's blockchain to store data unrelated to bitcoin payments is a controversial subject. Many developers consider such use abusive and want to discourage it. Others view it as a demonstration of the powerful capabilities of blockchain technology and want to encourage such experimentation. Those who object to the inclusion of non-payment data argue that it causes "blockchain bloat," burdening those running full bitcoin nodes with carrying the cost of disk storage for data that the blockchain was not intended to carry. Moreover, such transactions create UTXO that cannot be spent, using the destination bitcoin address as a free-form 20-byte field. Because the address is used for data, it doesn't correspond to a private key and the resulting UTXO can _never_ be spent; it's a fake payment. These transactions that can never be spent are therefore never removed from the UTXO set and cause the size of the UTXO database to forever increase, or "bloat."
In version 0.9 of the Bitcoin Core client, a compromise was reached with the introduction of the +OP_RETURN+ operator. +OP_RETURN+ allows developers to add 80 bytes of nonpayment data to a transaction output. However, unlike the use of "fake" UTXO, the +OP_RETURN+ operator creates an explicitly _provably unspendable_ output, which does not need to be stored in the UTXO set. +OP_RETURN+ outputs are recorded on the blockchain, so they consume disk space and contribute to the increase in the blockchain's size, but they are not stored in the UTXO set and therefore do not bloat the UTXO memory pool and burden full nodes with the cost of more expensive RAM.
+OP_RETURN+ scripts look like this:
----
OP_RETURN <data>
----
The data portion is limited to 80 bytes and most often represents a hash, such as the output from the SHA256 algorithm (32 bytes). Many applications put a prefix in front of the data to help identify the application. For example, the http://proofofexistence.com[Proof of Existence] digital notarization service uses the 8-byte prefix +DOCPROOF+, which is ASCII encoded as +44 4f 43 50 52 4f 4f 46+ in hexadecimal.
Keep in mind that there is no "unlocking script" that corresponds to +OP_RETURN+ that could possibly be used to "spend" an +OP_RETURN+ output. The whole point of +OP_RETURN+ is that you can't spend the money locked in that output, and therefore it does not need to be held in the UTXO set as potentially spendable—+OP_RETURN+ is _provably un-spendable_. +OP_RETURN+ is usually an output with a zero bitcoin amount, because any bitcoin assigned to such an output is effectively lost forever. If an +OP_RETURN+ is encountered by the script validation software, it results immediately in halting the execution of the validation script and marking the transaction as invalid. Thus, if you accidentally reference an +OP_RETURN+ output as an input in a transaction, that transaction is invalid.
A standard transaction (one that conforms to the +isStandard()+ checks) can have only one +OP_RETURN+ output. However, a single +OP_RETURN+ output can be combined in a transaction with outputs of any other type.
Two new command-line options have been added in Bitcoin Core as of version 0.10. The option +datacarrier+ controls relay and mining of OP_RETURN transactions, with the default set to "1" to allow them. The option +datacarriersize+ takes a numeric argument specifying the maximum size in bytes of the OP_RETURN data, 40 bytes by default.
[NOTE]
====
OP_RETURN was initially proposed with a limit of 80 bytes, but the limit was reduced to 40 bytes when the feature was released. In February 2015, in version 0.10 of Bitcoin Core, the limit was raised back to 80 bytes. Nodes may choose not to relay or mine OP_RETURN, or only relay and mine OP_RETURN containing less than 80 bytes of data.
Segregated Witness (segwit) is an upgrade to the bitcoin consensus rules and network protocol, scheduled for implementation in the second half of 2016.
In cryptography, the term "witness" is used to describe a solution to a cryptographic puzzle. In bitcoin terms, the witness satisfies a cryptographic condition placed on a Unspent Transaction Output (UTXO).
In the context of bitcoin, a digital signature is _one type of witness_, but a witness is more broadly any solution that can satisfy the conditions imposed on a UTXO and unlock that UTXO for spending. The term “witness” is a more general term for an “unlocking script” or “scriptSig”.
Before segwit’s introduction, every input in a transaction was followed by the witness data that unlocked it. The witness data was embedded in the transaction as part of each input, The term _segregated witness_ or _segwit_ for short, simply means separating the signature or unlocking script of a specific output. Think "separate scriptSig", or “separate signature” in the simplest form.
Segregated Witness therefore is an architectural change to bitcoin that aims to move the witness data from the scriptSig (unlocking script) field of a transaction into separate a _witness_ data structure that accompanies a transaction. Clients may request transaction data with or without the accompanying witness data.
In this section we will look at some of the benefits of segregated witness, describe the mechanism used to deploy and implement this architecture change and demonstrate the use of segregated witness in transactions and addresses.
Segregated Witness is defined by the following Bitcoin Improvement Proposals (BIPs):
BIP141 :: The main definition of Segregated Witness. https://github.com/bitcoin/bips/blob/master/bip-0141.mediawiki
BIP143 :: Transaction Signature Verification for Version 0 Witness Program
Segregated witness is an architectural change that has several effects on the scalability, security, economic incentives and performance of bitcoin.
Transaction malleability :: By moving the witness outside the transaction, the transaction hash used as an identifier no longer includes the witness data. Since the witness data is the only part of the transaction that can be modified by a third party (see <<transaction malleability>> and <<segwit_txid>>), removing it also removes the opportunity for transaction malleability attacks. With segregated witness, transaction hashes become immutable by anyone other than the creator of the transaction, which greatly improves the implementation of many other protocols that rely on advanced bitcoin transaction construction, such as payment channels, chained transactions and lightning networks.
Script Versioning :: With the introduction of segregated witness scripts, every locking script is preceded by a _script version_ number, similar to how transactions and blocks have version numbers. The addition of a script version number allows the scripting language to be upgraded in a backwards compatible way (ie. using soft-fork upgrades), to introduce new script operands, syntax or semantics. The ability to upgrade the scripting language in a non-disruptive way will greatly accelerate the rate of innovation in bitcoin.
Network and Storage Scaling :: The witness data is often a big contributor to the total size of a transaction. More complex scripts such as those used for multi-sig or payment channels are very large. In some cases these scripts account for the majority (more than 75%) of the data in a transaction. By moving the witness data outside the transaction, segregated witness improves bitcoin’s scalability. Nodes can prune the witness data after validating the signatures, or ignore it altogether when doing simplified payment verification. The witness data doesn’t need to be transmitted to all nodes and does not need to be stored on disk by all nodes.
Signature Verification Optimization :: Segregated Witness upgrades the signature functions (OP_CHECKSIG, OP_CHECKMULTISIG etc), to reduce the algorithm's computational complexity. Before segwit, the algorithm used to produce a signature required a number of hash operations that was proportional to the size of the transaction. Data-hasing computations increased in O(n^2^) with respect to the number of signature operations, introducing a substantial computational burden on all nodes verifying the signature. With segwit, the algorithm is changed to reduce the complexity to O(n).
Offline Signing Improvement :: Segregated Witness signatures incorporate the value (amount) referenced by each input in the hash that is signed. Previously, an offline signing device, such as a hardware wallet, would have to verify the amount of each input before signing a transaction. This was usually accomplished by streaming a large amount of data about the previous transactions referenced as inputs. Since the amount is now part of the commitment hash that is signed, an offline device does not need the previous transactions. If the amounts do not match (are misrepresented by a compromised online system), the signature will be invalid.
==== How Segregated Witness Works
At first glance, segregated witness appears to be a change to how transactions are constructed and therefore a transaction-level feature, but it is not. In fact, segregated witness is also a change to how individual UTXO are spent and therefore is a per-output feature.
A transaction can spend segregated witness outputs or traditional (inline-witness) outputs or both. Therefore, it does not make much sense to refer to a transaction as a “segregated witness transaction”. Rather we should refer to specific transaction inputs as “segregated witness inputs".
When a transaction spends a UTXO, it must provide a witness. In a traditional UTXO, the locking script requires that witness data be provided _inline_ in the input part of the transaction that spends the UTXO. A segregated witness UTXO, however, specifies a locking script that can be satisfied with witness data outside of the input (segregated).
==== Soft-fork (backwards compatibility)
Segregated witness is a significant change to the way outputs and transactions are architected. Such a change would normally require a simultaneous change in every bitcoin node and wallet, to change the consensus rules -- what is known as a hard fork. Instead, segregated witness is introduced with a much less disruptive change, which is backwards compatible, known as a soft fork. This type of upgrade allows non-upgraded software to ignore the changes and continue to operate without any disruption.
Segregated witness outputs are constructed so that older systems that are not segwit-aware can still validate them. To an old wallet or node, a segregated witness output looks like an output that _anyone can spend_. Such outputs can be spent with an empty signature, therefore the fact that there is no signature inside the transaction (it is segregated), does not invalidate the transaction. Newer wallets & mining nodes however see the segregated witness output and expect to find a valid witness for it in the transaction’s witness data.
==== Segregated Witness Output and Transaction Examples
Let’s look at some of our example transactions and see how they would change with segregated witness. We’ll first look at how a Pay-to-Public-Key-Hash (P2PKH) payment is transformed with segregated witness program. Then, we’ll look at the segregated witness equivalent for Pay-to-Script-Hash (P2SH) scripts. Finally, we’ll look at how both of the above segregated witness programs can be embedded inside a P2SH script.
[[p2wpkh]]
===== Pay-to-Witness-Public-Key-Hash (P2WPKH)
In <<cup_of_coffee>>, Alice created a transaction to pay Bob for a cup of coffee. That transaction created a Pay-to-Public-Key-Hash (P2PKH) output with a value of 0.015 BTC that was spendable by Bob. The output’s script looks like this:
With segregated witness, a Pay-to-Public-Key-Hash output, is created instead a Pay-to-Witness-Public-Key-Hash (P2WPKH), which looks like this:
.Example P2WPKH output script
----
0 ab68025513c3dbd2f7b92a94e0581f5d50f654e7
----
As you can see, a segregated witness output’s locking script is much simpler than a traditional output. It consists of two values that are pushed on to the script evaluation stack. To an old (non-segwit-aware) bitcoin client, the two pushes would look like an output that anyone can spend and does not require a signature (or rather, can be spent with an empty signature). To a newer, segwit-aware client, the first number (0) is interpreted as a version number (the _witness version_) and the second part (20 bytes) is the equivalent of a locking script known as a _witness program_. The 20-byte witness program is simply the hash of the public key, as in a P2PKH script
Now, let’s look at the corresponding transaction that Bob uses to spend this output. For the original script (non-segwit), Bob’s transaction would have to include a signature within the transaction input:
.Decoded transaction showing a P2PKH output being spent with a signature
However, to spend the segregated witness output, the transaction has no signature on that input. Instead, Bob’s transaction has an empty scriptSig and includes a segregated witness, outside the transaction itself:
.Decoded transaction showing a P2WPKH output being spent with separate witness data
It is extremely important to note that P2WPKH should only be created by the payee (recipient) and not converted by the sender from a known public key, P2PKH script or address. The sender has no way of knowing if the recipient's wallet has the ability to construct segwit transactions and spend P2WPKH outputs.
Additionally, P2WPKH outputs must be constructed from the hash of a _compressed_ public key. Uncompressed public keys are non-standard in segwit and may be explicitly disabled by a future soft fork. If the hash used in the P2WPKH came from an uncompressed public key, it may be unspendable and you may lose funds. P2WPKH outputs should be created by the payee's wallet by deriving a compressed public key from their private key.
[WARNING]
====
P2WPKH should be constructed by the payee (recipient), by converting a compressed public key to a P2WPKH hash. You should never transform a P2PKH script, bitcoin address or uncompressed public key to a P2WPKH witness script.
====
[[p2wsh]]
===== Pay-to-Witness-Script-Hash (P2WSH)
The second type of witness program corresponds to a Pay-to-Script-Hash (P2SH) script. We saw this type of script in <<p2sh>>. In that example, P2SH was used by Mohammed's company to express a multi-signature script. Payments to Mohammed's company were encoded with a locking script like this:
The P2SH script above references the hash of a _redeem script_ that defines a 2-of-3 multi-signature requirement to spend funds. To spend this output, Mohammed's company would present the redeem script (whose hash matches the script hash in the P2SH output) and the signatures necessary to satisfy that redeem script, all inside the transaction input:
.Decoded transaction showing a P2SH output being spent
Now, let's look at how this entire example would be upgraded to segwit. If Mohammed's customers were using a segwit compatible wallet, they would make a payment, creating a Pay-to-Witness-Script-Hash (P2WSH) output that would look like this:
Again, as with the example of P2WPKH, you can see that the segregated witness equivalent script is a lot simpler and omits the various script operands that you see in P2SH scripts. Instead, the segregated witness program consists of two values pushed to the stack: a witness version (0) and the 32-byte SHA256 hash of the redeem script.
[TIP]
====
While P2SH uses the 20-byte +RIPEMD160(SHA256(script))+ hash, the P2WSH witness program uses a 32-byte +SHA256(script)+ hash. This difference in the selection of the hashing algorithm is deliberate and used to differentiate between the two types of witness programs (P2WPKH and P2WSH) by the length of the hash, and to provide stronger security to P2WSH (128bits vs. 80bits of P2SH).
====
Mohammed's company can spend outputs the Pay-to-Witness-Script-Hash output by presenting the correct redeem script and sufficient signatures to satisfy the redeem script. Both the redeem script and the signatures would be segregated _outside_ the spending transaction as part of the witness data. Within the transaction input, Mohammed's wallet would put an empty scriptSig:
.Decoded transaction showing a P2WSH output being spent with separate witness data
In the previous two sections, we demonstrated two types of witness programs: <<p2wpkh>> and <<p2wsh>>. Both types of witness programs consist of single byte version number followed by a longer hash. They look very similar, but are interpreted very differently: one is interpreted as a public key hash, which is satisfied by a signature and the other as a script hash, which is satisfied by a redeem script. The critical difference between them is the length of the hash:
* The public key hash in P2WPKH is 20 bytes
* The script hash in P2WSH is 32 bytes
This is the one difference that allows a wallet to differentiate between the two types of witness programs. By looking at the length of the hash, a wallet can determine what type of witness program this is, P2WPKH or P2WSH.
==== Upgrading to Segregated Witness
As we can see from the examples above, upgrading to segregated witness is a two-step process. First, wallets must create special segwit type outputs. Then, these outputs can be spent by wallets that know how to construct segregated witness transactions. In the examples above, Alice's wallet was segwit-aware and able to create special outputs with segregated witness scripts. Bob's wallet is also segwit-aware and able to spend those outputs. What may not be obvious from the example is that in practice, Alice's wallet needs to _know_ that Bob uses a segwit-aware wallet and can spend these outputs. Otherwise, if Bob's wallet is not upgraded and Alice tries to make segwit payments to Bob, Bob's wallet will not be able to detect these payments.
[TIP]
====
For P2WPKH and P2WSH payment types, both the sender and the recipient wallets need to be upgraded to be able to use segwit. Furthermore, the sender's wallet needs to know that the recipient's wallet is segwit-aware.
====
Segregated witness will not be implemented simultaneously across the entire network. Rather, segregated witness is implemented as a backwards compatible upgrade, where _old and new clients can coexist_. Wallet developers will independently upgrade wallet software to add segwit capabilities. The P2WPKH and P2WSH payment types are intended for when both sender and recipient are segwit-aware. The traditional P2PKH and P2SH will continue to work for non-upgraded wallets. That leaves two important scenarios which are addressed in the next section:
* Ability of a sender's wallet that is not segwit-aware to make a payment to a recipient's wallet that can process segwit transactions.
* Ability of a sender's wallet that is segwit-aware to recognize and distinguish between recipients that are segwit-aware and ones that are not, by their _addresses_.
===== Embedding Segregated Witness Inside P2SH
Let's assume, for example, that Alice's wallet is not upgraded to segwit, but Bob's wallet is upgraded and can handle segwit transactions. Alice and Bob can use "old" non-segwit transactions. But Bob would likely want to use segwit to reduce transaction fees, taking advantage of the discount that applies to witness data.
In this case Bob's wallet can construct a P2SH address that contains a segwit script inside it. Alice's wallet sees this as a "normal" P2SH address and can make payments to it without any knowledge of segwit. Bob's wallet can then spend this payment with a segwit transaction, taking full advantage of segwit and reducing transaction fees.
Both forms of witness scripts, P2WPKH and P2WSH, can be embedded in a P2SH address. The first is noted as P2SH(P2WPKH) and the second is noted as P2SH(P2WSH).
The first form of witness script we will examine is P2SH(P2WPKH). This is a Pay-to-Witness-Public-Key-Hash witness program, embedded inside a Pay-to-Script-Hash script, so that it can be used by a wallet that is not aware of segwit.
Bob's wallet constructs a Pay-to-Witness-Public-Key-Hash (P2WPKH) witness program with Bob's public key. This witness program is then hashed and the resulting hash is encoded as a Pay-to-Script-Hash (P2SH) script. The P2SH script is converted to a bitcoin address, one which starts with a "3", as we saw in the <<p2sh>> section.
Bob's wallet starts with the P2WPKH witness program we saw earlier:
.Bob's P2WPKH witness program
----
0 ab68025513c3dbd2f7b92a94e0581f5d50f654e7
----
The P2WPKH witness program consists of the witness version and Bob's 20-byte public key hash.
Bob's wallet then hashes the above witness program, first with SHA256, then with RIPEMD160, producing another 20-byte hash:
.HASH160 of the P2WPKH witness program
----
660a5ab01c8468ac2e3cd58e9b17f8ba637867a4
----
The hash of the witness program is then embedded in a P2SH script:
.P2SH script containing the hash of a P2WPKH witness program
Finally, the P2SH script is converted to a P2SH bitcoin address:
.P2SH address
----
3AzZFY4WJJZbVr2A6qBTbdkYRpMLbdg6gD
----
Now, Bob can display this address for customers to pay for their coffee. Alice's wallet can make a payment to +3deadbeef+, just as it would to any other bitcoin address. Even though Alice's wallet has no support for segwit, the payment it creates can be spent by Bob with a segwit transaction.
Similarly, a P2WSH witness program for a multisig script or other complicated script can be embedded inside a Pay-to-Script-Hash script and address, making it possible for any wallet to make payments that are segwit compatible.
As we saw in <<p2wsh>>, Mohammed's company is using segregated witness payments to multi-signature scripts. To make it possible for any client to pay his company, regardless of whether their wallets are upgraded for segwit, Mohammed's wallet can embed the P2WSH witness program inside a P2SH script.
First, Mohammed's wallet creates the P2WSH witness program that corresponds to the multi-signature script, hashed with SHA256:
.Mohammed's wallet creates a P2WSH witness program
Finally, the wallet constructs a bitcoin address from this script:
.P2SH bitcoin address
----
3NTWTcFE88p26GTPoxcWef9Q5ncKt6CY2E
----
Now, Mohammed's clients can make payments to this address without any need to support segwit. Mohammed's company can then construct segwit transactions to spend these payments, taking advantage of segwit features including lower transaction fees.
===== Segregated Witness Addresses
After segwit is deployed on the bitcoin network, it will take some time until wallets are upgraded. It is quite likely therefore that segwit will mostly be used embedded in P2SH, as we saw in the previous section, at least for several months.
Eventually however, almost all wallets will be able to support segwit payments. At that time it will no longer be necessary to embed segwit in P2SH. It is therefore likely that a new form of bitcoin address will be created, one that indicates the recipient is segwit-aware and which directly encodes a witness program. There have been a number of proposals for a segregated witness address scheme, but none have been actively pursued at this time.
[[segwit_txid]]
===== Transaction Identifiers
One of the greatest benefits of Segregated Witness is that it eliminates third-party transaction malleability.
Before segwit, transactions could have their signatures subtly modified by third parties, changing their transaction ID (hash) without changing any fundamental properties (inputs, outputs, amounts). This created opportunities for Denial-of-Service attacks as well as attacks against poorly written wallet software that assumed unconfirmed transaction-hashes were immutable.
With the introduction of Segregated Witness, transactions have two identifiers, +txid+ and +wtxid+. The traditional transaction ID +txid+ is the double-SHA256 hash of the serialized transaction, without the witness data. A transaction +wtxid+ is the double-SHA256 hash of the new serialization format of the transaction with witness data.
The traditional +txid+ is calculated in exactly the same way as with a non-segwit transaction. However, since the segwit transaction has empty scriptSig's in every input, there is no part of the transaction that can be modified by a third party. Therefore, in a segwit transaction, the +txid+ is immutable by a third party, even when the transaction is unconfirmed.
The +wtxid+ is like an "extended" ID, in that the hash also incorporates the witness data. If a transaction is transmitted without witness data, then the +wtxid+ and +txid+ are identical. Note than since the +wtxid+ includes witness data (signatures) and since witness data may be malleable, the +wtxid+ should be considered malleable until the transaction is confirmed. Only the +txid+ of a segwit transaction can be considered immutable by third parties and only if _all_ the inputs of the transaction are segwit inputs.
[TIP]
====
Segregated Witness transactions have two IDs: +txid+ and +wtxid+. The +txid+ is the hash of the transaction without the witness data and the +wtxid+ is the hash inclusive of witness data. The +txid+ of a transaction where all inputs are segwit inputs, is not susceptible to third-party transaction malleability
====
==== Segregated Witness' New Signing Algorithm
Segregated Witness modifies the semantics of the four signature verification functions (OP_CHECKSIG, OP_CHECKSIGVERIFY, OP_CHECKMULTISIG and OP_CHECKMULTISIGVERIFY), changing the way a transaction commitment hash is calculated.
Signatures in bitcoin transactions are applied on a _commitment hash_ which is calculated from the transaction data, locking specific parts of the data indicating the signer's commitment to those values. For example, in a simple SIGHASH_ALL type signature, the commitment hash includes all inputs and outputs.
Unfortunately, the way the commitment hash was calculated introduced the possibility that a node verifying the signature can be forced to perform a significant number of hash computations. Specifically, the hash operations increase in O(n^2^) with respect to the number of signature operations in the transaction. An attacker could therefore create a transaction with a very large number of signature operations, causing the entire bitcoin network to have to perform hundreds or thousands of hash operations to verify the transaction.
Segwit represented an opportunity to address this problem by changing the way the commitment hash is calculated. For segwit version 0 witness programs, signature verification occurs using an improved commitment hash algorithm as specified in Bitcoin Improvement Proposal 143 (BIP143).
The new algorithm achieves two important goals. Firstly, the number of hash operations increases by a much more gradual O(n) to the number of signature operations, reducing the opportunity to create Denial-of-Service attacks with overly complex transactions. Secondly, the commitment hash now also includes the value (amounts) of each input as part of the commitment. This means that a signer can commit to a specific input value without needing to "fetch" and check the previous transaction referenced by the input. In the case of offline devices, such as hardware wallets, this greatly simplifies the communication between the host and the hardware wallet, removing the need to stream previous transactions for validation. A hardware wallet can accept the input value "as stated" by an untrusted host. Since the signature is invalid if that input value is not correct, the hardware wallet doesn't need to validate the value before signing the input.
==== Economic Incentives for Segregated Witness
Bitcoin mining nodes and full nodes incur costs for the resources used to support the bitcoin network and the blockchain. As the volume of bitcoin transactions increases, so does the cost of resources (CPU, network bandwidth, disk space, memory). Miners are compensated for these costs through fees that are proportional to the size (in bytes) of each transaction. Non-mining full nodes are not compensated, so they incur these costs because they have a need to run an authoritative fully-validating full-index node, perhaps because they use the node to operate a bitcoin business.
Without transaction fees, the growth in bitcoin data would arguably increase dramatically. Fees are intended to align the needs of bitcoin users with the burden their transactions impose on the network, through a market-based price discovery mechanism.
The calculation of fees based on transaction size treats all the data in the transaction as equal in cost. But from the perspective of full nodes and miners, some parts of a transaction carry much higher costs. Every transaction added to the bitcoin network affects the consumption of four resources on nodes:
Disk Space :: Every transaction is stored in the blockchain, adding to the total size of the blockchain. The blockchain is stored on disk, but the storage can be optimized by “pruning” older transactions.
CPU :: Every transaction must be validated, which requires CPU time.
Bandwidth :: Every transaction is transmitted (through flood propagation) across the network at least once. Without any optimization in the block propagation protocol, transactions are transmitted again as part of a block, doubling the impact on network capacity
Memory :: Nodes that validate transactions keep the UTXO index or the entire UTXO set in memory to speed up validation. Because memory is at least one order of magnitude more expensive than disk, growth of the UTXO set contributes disproportionately to the cost of running a node.
As you can see from the list above, not every part of a transaction has an equal impact on the cost of running a node or on the ability of bitcoin to scale to support more transactions. The most expensive part of a transaction are the newly created outputs, as they are added to the in-memory UTXO set. By comparison, signatures (aka witness data) add the least burden to the network and the cost of running a node, because witness data are only validated once and then never used again. Furthermore, immediately after receiving a new transaction and validating witness data, nodes can discard that witness data. If fees are calculated on transaction size, without discriminating between these two types of data, then the market incentives of fees are not aligned with the actual costs imposed by a transaction. In fact, the current fee structure actually encourages the opposite behavior, because witness data is the largest part of a transaction.
The incentives created by fees matter because they affect the behavior of wallets. All wallets must implement some strategy for assembling transactions that takes into considerations a number of factors, such as privacy (reducing address re-use), fragmentation (making lots of loose change) and fees. If the fees are overwhelmingly motivating wallets to use as few inputs as possible in transactions, this can lead to UTXO picking and change address strategies that inadvertently bloat the UTXO set.
Transactions consume UTXO in their inputs and create new UTXO with their outputs. A transaction, therefore, that has more inputs than outputs will result in a decrease in the UTXO set, whereas a transaction that has more outputs than inputs will result in an increase in the UTXO set. Let’s consider the _difference_ between inputs and outputs and call that the “Net new UTXO”. That’s an important metric, as it tells us what impact a transaction will have on the most expensive network-wide resource, the in-memory UTXO set. A transaction with positive Net-new-UTXO, adds to that burden. A transaction with a negative Net-new-UTXO reduces the burden. We would therefore want to encourage transactions that are either negative Net-new-UTXO or neutral with zero Net-new-UTXO.
Let’s look at an example of what incentives are created by the transaction fee calculation, with and without segregated witness. We will look at two different transactions. Transaction A is a 3-input, 2-output transaction, which has a Net-new-UTXO metric of -1, meaning it consumes one more UTXO than it creates, reducing the UTXO set by one. Transaction B is a 2-input, 3-output transaction, which has a Net-new-UTXO metric of 1, meaning it adds one UTXO to the UTXO set, imposing additional cost on the entire bitcoin network. Both transactions use multi-signature (2-of-3) scripts, to demonstrate how complex scripts increase the impact of segregated witness on fees. Let’s assume a transaction fee of 30 satoshi per byte and a 75% fee discount on witness data:
Without Segregated Witness
Transaction A fee: 25,710 satoshi
Transaction B fee: 18,990 satoshi
With Segregated Witness
Transaction A fee: 8,130 satoshi
Transaction B fee: 12,045 satoshi
Both transactions are less expensive when segregated witness is implemented. But comparing the costs between the two transactions, we see that before segregated witness, the fee is higher for the transaction that has a negative Net-new-UTXO. After segregated witness, the transaction fees align with the incentive to minimize new UTXO creation, by not inadvertently penalizing transactions with many inputs.
Segregated witness therefore has two main effects on the fees paid by bitcoin users. Firstly, segwit reduces the overall cost of transactions by discounting witness data and increasing the capacity of the bitcoin blockchain. Secondly, segwit’s discount on witness data correcting a misalignment of incentives that may have inadvertently created more bloat in the UTXO set.
=== Proposed Future Scripting and Transaction Improvements
==== Confidential Transactions
==== Schnorr Signatures
==== Merkleized Abstract Syntax Trees (Pay-to-Merkle-Root)
