mirror of
https://github.com/bitcoinbook/bitcoinbook
synced 2024-11-22 16:18:11 +00:00
ch07 outline fill
This commit is contained in:
Andreas M. Antonopoulos
parent
16f776af0a
commit
fb3107824c
208
ch07.asciidoc
208
ch07.asciidoc
@ -0,0 +1,208 @@
|
||||
[[ch07]]
|
||||
[[adv_transactions]]
|
||||
== Advanced Transactions and Scripting
|
||||
|
||||
[[ch07_intro]]
|
||||
=== Introduction
|
||||
|
||||
In the previous chapter, we introduced the basic elements of bitcoin transactions and looked at the most common type of transaction script, the Pay-to-Public-Key-Hash script. In this chapter we will look at more advanced scripting and how we can use them to build complex transactions, smart contracts and even overlay transaction networks on top of bitcoin.
|
||||
|
||||
First, we will look at _multi-signature_ scripts. Next we will examine the second most common transaction script, _Pay-to-Script-Hash_, which opens up a whole world of complex scripts. Then we will show scripts used for applications beyond payments: _data recording_ and _colored coins_. Next, we will examine new script operators that add a time-dimension to bitcoin, through _timelocks_. Finally, we will put all of these together as part of the technology of _state channels_ and show how these can enable an overlay network called the _Lightning Network._
|
||||
|
||||
[[multisig]]
|
||||
=== Multi-Signature
|
||||
|
||||
((("multi-signature scripts")))((("transactions","multi-signature scripts")))Multi-signature scripts set a condition where N public keys are recorded in the script and at least M of those must provide signatures to release the encumbrance. This is also known as an M-of-N scheme, where N is the total number of keys and M is the threshold of signatures required for validation. For example, a 2-of-3 multi-signature is one where three public keys are listed as potential signers and at least two of those must be used to create signatures for a valid transaction to spend the funds. ((("multi-signature scripts","limits on")))At this time, standard multi-signature scripts are limited to at most 15 listed public keys, meaning you can do anything from a 1-of-1 to a 15-of-15 multi-signature or any combination within that range. The limitation to 15 listed keys might be lifted by the time this book is published, so check the((("isStandard() function"))) +isStandard()+ function to see what is currently accepted by the network.
|
||||
|
||||
The general form of a locking script setting an M-of-N multi-signature condition is:
|
||||
|
||||
----
|
||||
M <Public Key 1> <Public Key 2> ... <Public Key N> N OP_CHECKMULTISIG
|
||||
----
|
||||
|
||||
where N is the total number of listed public keys and M is the threshold of required signatures to spend the output.
|
||||
|
||||
A locking script setting a 2-of-3 multi-signature condition looks like this:
|
||||
|
||||
----
|
||||
2 <Public Key A> <Public Key B> <Public Key C> 3 OP_CHECKMULTISIG
|
||||
----
|
||||
|
||||
The preceding locking script can be satisfied with an unlocking script containing pairs of signatures and public keys:
|
||||
|
||||
----
|
||||
OP_0 <Signature B> <Signature C>
|
||||
----
|
||||
or any combination of two signatures from the private keys corresponding to the three listed public keys.
|
||||
|
||||
[NOTE]
|
||||
====
|
||||
((("CHECKMULTISIG implementation")))The prefix +OP_0+ is required because of a bug in the original implementation of +CHECKMULTISIG+ where one item too many is popped off the stack. It is ignored by +CHECKMULTISIG+ and is simply a placeholder.
|
||||
====
|
||||
|
||||
The two scripts together would form the combined validation script:
|
||||
|
||||
----
|
||||
OP_0 <Signature B> <Signature C> 2 <Public Key A> <Public Key B> <Public Key C> 3 OP_CHECKMULTISIG
|
||||
----
|
||||
|
||||
When executed, this combined script will evaluate to TRUE if, and only if, the unlocking script matches the conditions set by the locking script. In this case, the condition is whether the unlocking script has a valid signature from the two private keys that correspond to two of the three public keys set as an encumbrance.
|
||||
|
||||
|
||||
[[p2sh]]
|
||||
=== Pay-to-Script-Hash (P2SH)
|
||||
|
||||
((("multi-signature scripts","P2SH and", id="ix_ch05-asciidoc17", range="startofrange")))((("Pay-to-script-hash (P2SH)", id="ix_ch05-asciidoc18", range="startofrange")))((("transactions","Pay-to-script-hash", id="ix_ch05-asciidoc19", range="startofrange")))Pay-to-script-hash (P2SH) was introduced in 2012 as a powerful new type of transaction that greatly simplifies the use of complex transaction scripts. To explain the need for P2SH, let's look at a practical example.
|
||||
|
||||
In <<ch01_intro_what_is_bitcoin>> we introduced Mohammed, an electronics importer based in Dubai. Mohammed's company uses bitcoin's multi-signature feature extensively for its corporate accounts. Multi-signature scripts are one of the most common uses of bitcoin's advanced scripting capabilities and are a very powerful feature. Mohammed's company uses a multi-signature script for all customer payments, known in accounting terms as "accounts receivable," or AR. With the multi-signature scheme, any payments made by customers are locked in such a way that they require at least two signatures to release, from Mohammed and one of his partners or from his attorney who has a backup key. A multi-signature scheme like that offers corporate governance controls and protects against theft, embezzlement, or loss.
|
||||
|
||||
The resulting script is quite long and looks like this:
|
||||
|
||||
----
|
||||
2 <Mohammed's Public Key> <Partner1 Public Key> <Partner2 Public Key> <Partner3 Public Key> <Attorney Public Key> 5 OP_CHECKMULTISIG
|
||||
----
|
||||
|
||||
|
||||
Although multi-signature scripts are a powerful feature, they are cumbersome to use. Given the preceding script, Mohammed would have to communicate this script to every customer prior to payment. Each customer would have to use special bitcoin wallet software with the ability to create custom transaction scripts, and each customer would have to understand how to create a transaction using custom scripts. Furthermore, the resulting transaction would be about five times larger than a simple payment transaction, because this script contains very long public keys. The burden of that extra-large transaction would be borne by the customer in the form of fees. Finally, a large transaction script like this would be carried in the UTXO set in RAM in every full node, until it was spent. All of these issues make using complex output scripts difficult in practice.
|
||||
|
||||
Pay-to-script-hash (P2SH) was developed to resolve these practical difficulties and to make the use of complex scripts as easy as a payment to a bitcoin address. With P2SH payments, the complex locking script is replaced with its digital fingerprint, a cryptographic hash. When a transaction attempting to spend the UTXO is presented later, it must contain the script that matches the hash, in addition to the unlocking script. In simple terms, P2SH means "pay to a script matching this hash, a script that will be presented later when this output is spent."
|
||||
|
||||
In P2SH transactions, the locking script that is replaced by a hash is referred to as the((("redeem script"))) _redeem script_ because it is presented to the system at redemption time rather than as a locking script. <<without_p2sh>> shows the script without P2SH and <<with_p2sh>> shows the same script encoded with P2SH.
|
||||
|
||||
[[without_p2sh]]
|
||||
.Complex script without P2SH
|
||||
|=======
|
||||
| Locking Script | 2 PubKey1 PubKey2 PubKey3 PubKey4 PubKey5 5 OP_CHECKMULTISIG
|
||||
| Unlocking Script | Sig1 Sig2
|
||||
|=======
|
||||
|
||||
[[with_p2sh]]
|
||||
.Complex script as P2SH
|
||||
|=======
|
||||
| Redeem Script | 2 PubKey1 PubKey2 PubKey3 PubKey4 PubKey5 5 OP_CHECKMULTISIG
|
||||
| Locking Script | OP_HASH160 <20-byte hash of redeem script> OP_EQUAL
|
||||
| Unlocking Script | Sig1 Sig2 redeem script
|
||||
|=======
|
||||
|
||||
As you can see from the tables, with P2SH the complex script that details the conditions for spending the output (redeem script) is not presented in the locking script. Instead, only a hash of it is in the locking script and the redeem script itself is presented later, as part of the unlocking script when the output is spent. This shifts the burden in fees and complexity from the sender to the recipient (spender) of the transaction.
|
||||
|
||||
Let's look at Mohammed's company, the complex multi-signature script, and the resulting P2SH scripts.
|
||||
|
||||
First, the multi-signature script that Mohammed's company uses for all incoming payments from customers:
|
||||
|
||||
----
|
||||
2 <Mohammed's Public Key> <Partner1 Public Key> <Partner2 Public Key> <Partner3 Public Key> <Attorney Public Key> 5 OP_CHECKMULTISIG
|
||||
----
|
||||
|
||||
If the placeholders are replaced by actual public keys (shown here as 520-bit numbers starting with 04) you can see that this script becomes very long:
|
||||
|
||||
----
|
||||
2
|
||||
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
|
||||
----
|
||||
|
||||
This entire script can instead be represented by a 20-byte cryptographic hash, by first applying the SHA256 hashing algorithm and then applying the RIPEMD160 algorithm on the result. The 20-byte hash of the preceding script is:
|
||||
|
||||
----
|
||||
54c557e07dde5bb6cb791c7a540e0a4796f5e97e
|
||||
----
|
||||
|
||||
A P2SH transaction locks the output to this hash instead of the longer script, using the locking script:
|
||||
|
||||
----
|
||||
OP_HASH160 54c557e07dde5bb6cb791c7a540e0a4796f5e97e OP_EQUAL
|
||||
----
|
||||
which, as you can see, is much shorter. Instead of "pay to this 5-key multi-signature script," the P2SH equivalent transaction is "pay to a script with this hash." A customer making a payment to Mohammed's company need only include this much shorter locking script in his payment. When Mohammed wants to spend this UTXO, they must present the original redeem script (the one whose hash locked the UTXO) and the signatures necessary to unlock it, like this:
|
||||
|
||||
----
|
||||
<Sig1> <Sig2> <2 PK1 PK2 PK3 PK4 PK5 5 OP_CHECKMULTISIG>
|
||||
----
|
||||
|
||||
The two scripts are combined in two stages. First, the redeem script is checked against the locking script to make sure the hash matches:
|
||||
|
||||
----
|
||||
<2 PK1 PK2 PK3 PK4 PK5 5 OP_CHECKMULTISIG> OP_HASH160 <redeem scriptHash> OP_EQUAL
|
||||
----
|
||||
If the redeem script hash matches, the unlocking script is executed on its own, to unlock the redeem script:
|
||||
|
||||
----
|
||||
<Sig1> <Sig2> 2 PK1 PK2 PK3 PK4 PK5 5 OP_CHECKMULTISIG
|
||||
----
|
||||
|
||||
==== Pay-to-script-hash addresses
|
||||
|
||||
((("addresses, bitcoin","Pay-to-Script-Hash (P2SH)")))((("Pay-to-script-hash (P2SH)","addresses")))Another important part of the P2SH feature is the ability to encode a script hash as an address, as defined in BIP-13. P2SH addresses are Base58Check encodings of the 20-byte hash of a script, just like bitcoin addresses are Base58Check encodings of the 20-byte hash of a public key. P2SH addresses use the version prefix "5", which results in Base58Check-encoded addresses that start with a "3". For example, Mohammed's complex script, hashed and Base58Check-encoded as a P2SH address becomes +39RF6JqABiHdYHkfChV6USGMe6Nsr66Gzw+. Now, Mohammed can give this "address" to his customers and they can use almost any bitcoin wallet to make a simple payment, as if it were a bitcoin address. The 3 prefix gives them a hint that this is a special type of address, one corresponding to a script instead of a public key, but otherwise it works in exactly the same way as a payment to a bitcoin address.
|
||||
|
||||
P2SH addresses hide all of the complexity, so that the person making a payment does not see the script.
|
||||
|
||||
==== Benefits of pay-to-script-hash
|
||||
|
||||
((("Pay-to-script-hash (P2SH)","benefits of")))The pay-to-script-hash feature offers the following benefits compared to the direct use of complex scripts in locking outputs:
|
||||
|
||||
* Complex scripts are replaced by shorter fingerprints in the transaction output, making the transaction smaller.
|
||||
* Scripts can be coded as an address, so the sender and the sender's wallet don't need complex engineering to implement P2SH.
|
||||
* P2SH shifts the burden of constructing the script to the recipient, not the sender.
|
||||
* P2SH shifts the burden in data storage for the long script from the output (which is in the UTXO set) to the input (stored on the blockchain).
|
||||
* P2SH shifts the burden in data storage for the long script from the present time (payment) to a future time (when it is spent).
|
||||
* P2SH shifts the transaction fee cost of a long script from the sender to the recipient, who has to include the long redeem script to spend it.
|
||||
|
||||
==== Redeem script and isStandard validation
|
||||
|
||||
((("pay-to-script-hash (P2SH)","isStandard validation")))((("pay-to-script-hash (P2SH)","redeem script for")))Prior to version 0.9.2 of the Bitcoin Core client, pay-to-script-hash was limited to the standard types of bitcoin transaction scripts, by the +isStandard()+ function. That means that the redeem script presented in the spending transaction could only be one of the standard types: P2PK, P2PKH, or multi-sig nature, excluding +OP_RETURN+ and P2SH itself.
|
||||
|
||||
As of version 0.9.2 of the Bitcoin Core client, P2SH transactions can contain any valid script, making the P2SH standard much more flexible and allowing for experimentation with many novel and complex types of transactions.
|
||||
|
||||
Note that you are not able to put a P2SH inside a P2SH redeem script, because the P2SH specification is not recursive. You are also still not able to use +OP_RETURN+ in a redeem script because +OP_RETURN+ cannot be redeemed by definition.
|
||||
|
||||
Note that because the redeem script is not presented to the network until you attempt to spend a P2SH output, if you lock an output with the hash of an invalid transaction it will be processed regardless. However, you will not be able to spend it because the spending transaction, which includes the redeem script, will not be accepted because it is an invalid script. This creates a risk, because you can lock bitcoin in a P2SH that cannot be spent later. The network will accept the P2SH encumbrance even if it corresponds to an invalid redeem script, because the script hash gives no indication of the script it represents.
|
||||
|
||||
[WARNING]
|
||||
====
|
||||
((("Pay-to-Script-Hash (P2SH)","locking scripts")))P2SH locking scripts contain the hash of a redeem script, which gives no clues as to the content of the redeem script itself. The P2SH transaction will be considered valid and accepted even if the redeem script is invalid. You might accidentally lock bitcoin in such a way that it cannot later be spent.(((range="endofrange", startref="ix_ch05-asciidoc19")))(((range="endofrange", startref="ix_ch05-asciidoc18")))(((range="endofrange", startref="ix_ch05-asciidoc17")))(((range="endofrange", startref="ix_ch05-asciidoc0")))
|
||||
====
|
||||
|
||||
[[op_return]]
|
||||
=== Data Recording Output (OP_RETURN)
|
||||
|
||||
((("ledger, storing unrelated information in")))((("OP_RETURN operator")))((("transactions","storing unrelated information in")))Bitcoin's distributed and timestamped ledger, the blockchain, has potential uses far beyond payments. Many developers have tried to use the transaction scripting language to take advantage of the security and resilience of the system for applications such as((("digital notary services")))((("smart contracts")))((("stock certificates"))) digital notary services, stock certificates, and smart contracts. Early attempts to use bitcoin's script language for these purposes involved creating transaction outputs that recorded data on the blockchain; for example, to record a digital fingerprint of a file in such a way that anyone could establish proof-of-existence of that file on a specific date by reference to that transaction.
|
||||
|
||||
((("blockchains","storing unrelated information in")))The use of bitcoin's blockchain to store data unrelated to bitcoin payments is a controversial subject. Many developers consider such use abusive and want to discourage it. Others view it as a demonstration of the powerful capabilities of blockchain technology and want to encourage such experimentation. Those who object to the inclusion of non-payment data argue that it causes "blockchain bloat," burdening those running full bitcoin nodes with carrying the cost of disk storage for data that the blockchain was not intended to carry. Moreover, such transactions create UTXO that cannot be spent, using the destination bitcoin address as a free-form 20-byte field. Because the address is used for data, it doesn't correspond to a private key and the resulting UTXO can _never_ be spent; it's a fake payment. These transactions that can never be spent are therefore never removed from the UTXO set and cause the size of the UTXO database to forever increase, or "bloat."
|
||||
|
||||
In version 0.9 of the Bitcoin Core client, a compromise was reached with the introduction of the +OP_RETURN+ operator. +OP_RETURN+ allows developers to add 80 bytes of nonpayment data to a transaction output. However, unlike the use of "fake" UTXO, the +OP_RETURN+ operator creates an explicitly _provably unspendable_ output, which does not need to be stored in the UTXO set. +OP_RETURN+ outputs are recorded on the blockchain, so they consume disk space and contribute to the increase in the blockchain's size, but they are not stored in the UTXO set and therefore do not bloat the UTXO memory pool and burden full nodes with the cost of more expensive RAM.
|
||||
|
||||
+OP_RETURN+ scripts look like this:
|
||||
|
||||
----
|
||||
OP_RETURN <data>
|
||||
----
|
||||
|
||||
The data portion is limited to 80 bytes and most often represents a hash, such as the output from the SHA256 algorithm (32 bytes). Many applications put a prefix in front of the data to help identify the application. For example, the http://proofofexistence.com[Proof of Existence] digital notarization service uses the 8-byte prefix +DOCPROOF+, which is ASCII encoded as +44 4f 43 50 52 4f 4f 46+ in hexadecimal.
|
||||
|
||||
Keep in mind that there is no "unlocking script" that corresponds to +OP_RETURN+ that could possibly be used to "spend" an +OP_RETURN+ output. The whole point of +OP_RETURN+ is that you can't spend the money locked in that output, and therefore it does not need to be held in the UTXO set as potentially spendable—+OP_RETURN+ is _provably un-spendable_. +OP_RETURN+ is usually an output with a zero bitcoin amount, because any bitcoin assigned to such an output is effectively lost forever. If an +OP_RETURN+ is encountered by the script validation software, it results immediately in halting the execution of the validation script and marking the transaction as invalid. Thus, if you accidentally reference an +OP_RETURN+ output as an input in a transaction, that transaction is invalid.
|
||||
|
||||
A standard transaction (one that conforms to the +isStandard()+ checks) can have only one +OP_RETURN+ output. However, a single +OP_RETURN+ output can be combined in a transaction with outputs of any other type.
|
||||
|
||||
Two new command-line options have been added in Bitcoin Core as of version 0.10. The option +datacarrier+ controls relay and mining of OP_RETURN transactions, with the default set to "1" to allow them. The option +datacarriersize+ takes a numeric argument specifying the maximum size in bytes of the OP_RETURN data, 40 bytes by default.
|
||||
|
||||
[NOTE]
|
||||
====
|
||||
OP_RETURN was initially proposed with a limit of 80 bytes, but the limit was reduced to 40 bytes when the feature was released. In February 2015, in version 0.10 of Bitcoin Core, the limit was raised back to 80 bytes. Nodes may choose not to relay or mine OP_RETURN, or only relay and mine OP_RETURN containing less than 80 bytes of data.
|
||||
====
|
||||
|
||||
=== Colored Coins
|
||||
|
||||
=== Timelocks
|
||||
|
||||
==== Locktime
|
||||
|
||||
==== Check Lock Time Verify (CLTV)
|
||||
|
||||
==== Check Sequence Verify (CSV)
|
||||
|
||||
=== State Channels & Lightning Network
|
||||
|
||||
==== Uni-directional State Channels
|
||||
|
||||
==== Bi-directional State Channels
|
||||
|
||||
==== Reouted State Channels (Lightning Network)
|
||||
Loading…
Reference in New Issue
Block a user