bitcoinbook/ch08.asciidoc

[[bitcoin_network_ch08]]
== The Bitcoin Network

((("Bitcoin network", "peer-to-peer architecture")))((("peer-to-peer
(P2P)")))Bitcoin is structured as a peer-to-peer network architecture on
top of the internet. The term peer-to-peer, or P2P, means that the
full nodes which participate in the network are peers to each other, that
they can all equal, and that there are no "special" nodes.
The network nodes
interconnect in a mesh network with a "flat" topology. There is no
server, no centralized service, and no hierarchy within the network.
Nodes in a P2P network both provide and consume services at the same
time. P2P
networks are inherently resilient, decentralized, and open. A preeminent
example of a P2P network architecture was the early internet itself,
where nodes on the IP network were equal. Today's internet architecture
is more hierarchical, but the Internet Protocol still retains its
flat-topology essence. Beyond Bitcoin and the internet, the largest and most successful
application of P2P technologies is file sharing, with Napster as the
pioneer and BitTorrent as the most recent evolution of the architecture.

Bitcoin's P2P network architecture is much more than a topology choice.
Bitcoin is a P2P digital cash system by design, and the network
architecture is both a reflection and a foundation of that core
characteristic. Decentralization of control is a core design principle
that can only be achieved and maintained by a flat and decentralized P2P
consensus network.

((("Bitcoin network", "defined")))The term "Bitcoin network" refers to
the collection of nodes running the Bitcoin P2P protocol. In addition to
the Bitcoin P2P protocol, there are other protocols that
are used for mining and lightweight or mobile wallets. These additional
protocols are provided by gateway routing servers that access the
Bitcoin network using the Bitcoin P2P protocol and then extend that
network to nodes running other protocols. For example, Stratum servers
connect Stratum mining nodes via the Stratum protocol to the main
Bitcoin network and bridge the Stratum protocol to the Bitcoin P2P
protocol. We will describe some of the most commonly used of those
protocols in this chapter in addition to the base Bitcoin P2P protocol.

=== Node Types and Roles

((("Bitcoin network", "node types and roles",
id="BNnode08")))((("Bitcoin nodes", "types and roles",
id="BNtype08")))Although full nodes (peers) in the Bitcoin P2P network are equal to each other,
they may take on different roles depending on the functionality they are
supporting. A Bitcoin node is a collection of several functions: validation,
routing, mining, and wallet services.

All full nodes include the validation function and
might include other functionality.

Some nodes, called _archival full nodes_, also maintain a
complete and up-to-date copy of the blockchain. Full nodes can
autonomously and authoritatively verify any transaction without external
reference. ((("simple-payment-verification (SPV)")))  Those nodes can
serve data to clients that stor
only a subset of the blockchain and verify transactions using a method
called _simplified payment verification_, or SPV. ((("lightweight
clients")))These nodes are known as lightweight clients.

((("Bitcoin nodes", "mining nodes")))((("mining and consensus", "mining
nodes")))((("Proof-of-Work algorithm")))((("mining and consensus",
"Proof-of-Work algorithm")))Miners compete to create new blocks by
running specialized hardware to solve the Proof-of-Work algorithm. Some
miners operate full nodes, validating every block on the
blockchain, while others are clients participating in pool
mining and depending on a pool server to provide them with work.

User wallets might connect to the user's own full node, as is sometimes the case with
desktop Bitcoin clients, but many user wallets, especially
those running on resource-constrained devices such as smartphones, are
lightweight nodes.

In addition to the main node types on the Bitcoin P2P protocol, there
are servers and nodes running other protocols, such as specialized
mining pool protocols and lightweight client-access protocols.

=== The Network

((("", startref="BNnode08")))((("", startref="BNtype08")))((("Bitcoin
network", "extended network activities")))As of this writing, the main Bitcoin network,
running the Bitcoin P2P protocol, consists of about 10,000
listening nodes running various versions of Bitcoin Core and a few
hundred nodes running various other implementations of the Bitcoin P2P
protocol such as BitcoinJ, Libbitcoin, btcd, and bcoin. A small
percentage of the nodes on the Bitcoin P2P network are also mining
nodes. Various individuals and companies interface with the Bitcoin
network by running archival full nodes,
with full copies of the blockchain and a network node, but without
mining or wallet functions. These nodes act as network edge routers,
allowing various other services (exchanges, wallets, block explorers,
merchant payment processing) to be built on top.

The extended Bitcoin network includes the network running the Bitcoin
P2P protocol, described earlier, as well as nodes running specialized
protocols. Attached to the main Bitcoin P2P network are a number of pool
servers and protocol gateways that connect nodes running other
protocols. These other protocol nodes are mostly pool mining nodes (see
<<mining>>) and lightweight wallet clients, which do not carry a full
copy of the blockchain.


=== Compact Block Relay

When a miner finds a new block, they announce it to the Bitcoin network
(which includes other miners).  The miner who found that block can start
building on top of it immediately; all other miners who haven't learned
about the block yet will continue building on top of the previous block
until they do learn about it (and, ideally, they also validate it).

If, before they learn about the new block, one of those other
miners creates a block, their block will be in competition with the
first miner's new block.  Only one of the blocks will ever be included
in the blockchain used by all full nodes, and miners only get paid for
blocks that are widely accepted.

Whichever block has a second block built on top of it first wins (unless
there's another near-tie), which is called a _block-finding race_.
Block-finding races give the advantage to the largest miners, so they
act in opposition to Bitcoin's essential decentralization.  To prevent
block-finding races and allow miners of any size to participate equally
in the lottery that is Bitcoin mining, it's extremely useful to minimize
the time between when one miner announces a new block and when other
miners receive that block.

.A blockchain fork requiring a mining race
image::images/race1.dot.png["Mining race"]

In 2015, a new version of Bitcoin Core added a feature called
_compact block relay_ (specified in BIP152) that allows transferring new
blocks both faster and with less bandwidth.

As background, full nodes that relay unconfirmed transactions also store
many of those transactions in their mempools (see <<mempool>>).  When
some of those transactions are confirmed in a new block, the node
doesn't need to receive a second copy of those transactions.

Instead of receiving redundant unconfirmed transactions, compact blocks
allows a peer that believes your node already has a transaction in that
block to instead send a short 6-byte identifier for that transaction.
When your node receives a compact block with one or more identifiers, it
checks its mempool for those transactions and uses them if they are
found.  For any transaction that isn't found in your local node's
mempool, your node can send a request to the peer for a copy.

Conversely, if the remote peer believes your node's mempool doesn't have
some of transactions that appear in the block, it can include a copy of
those transaction in the compact block.

If the remote peer guesses correctly about what transactions your node
has in its mempool, and which it does not, it will send a block nearly
as efficiently as is theoretically possible (for a typical block, it'll
be between 97% to 99% efficient).

[TIP]
====
Compact block relay does not decrease the size of blocks.  It just
prevents the redundant transfer of information that a node already has.
When a node doesn't previously have information about a block, for
example when a node is first started, it must receive complete copies of
each block.
====

There are two modes that Bitcoin Core currently implements for sending
compact blocks:

Low-bandwidth mode::
  When your node requests that a peer use low-bandwidth mode (the default),
  that peer will tell your node the 32-byte identifier (header hash) of a
  new block but will not send your node any details about it.  If your
  node acquires that block first from another source, this avoids
  wasting any more of your bandwidth acquiring a redundant copy of that
  block.  If your node does need the block, it will request a compact
  block.

High-bandwidth mode::
  When your node requests that a peer use high-bandwidth mode, that peer
  will send your node a compact block for a new block even before it has
  fully verified that the block is valid.  The only validation the peer
  will perform is ensuring that the block's header contains the correct
  amount of proof of work.  Since proof of work is expensive to generate
  (about $150,000 USD at the time of writing), it's unlikely that a
  miner would fake it just to waste the bandwidth of relay nodes.
  Skipping validation before relay allows new blocks to travel across
  the network with minimal delays at each hop.
+
The downside of high-bandwidth node is that your node is likely to
receive redundant information from each high-bandwidth peer it chooses.
As of this writing, Bitcoin Core currently only asks three peers to use
high-bandwidth mode (and it tries to choose peers that have a history of
quickly announcing blocks).

// released into the public domain by Nicolas Dorier
.BIP152 modes compared (from BIP152)
image::images/bip152.png["BIP152"]

The names of the two methods (which are taken from BIP152) can be a bit
confusing.  Low-bandwidth mode saves bandwidth by not sending blocks in
most cases.  High-bandwidth mode uses more bandwidth than low-bandwidth
mode but, in most cases, much less bandwidth than was used for block
relay before compact blocks were implemented.

=== Private Block Relay Networks

Although compact blocks go a long way towards minimizing the latency
of block propagation, it's possible to minimize latency further.  Unlike
compact blocks, though, the other solutions involve tradeoffs that
make them unavailable or unsuitable for the public P2P relay network.
For that reason, there has been experimentation with private relay
networks for blocks.

One simple technique is to pre-select a route between endpoints.  For
example, a relay network with servers running in datacenters near major
trans-oceanic fiber optic lines might be able to forward new blocks
faster than waiting for the block to arrive at the node run by some home
user many kilometers away from the fiber optic line.

Another, more complex technique, is Forward Error Correction (FEC).
This allows a compact block message to be split into several parts, with
each part having extra data appended.  If any of the parts isn't
received, that part can be reconstructed from the parts that are
received.  Depending on the settings, up to several parts may be
reconstructed if they are lost.

FEC avoids the problem of a compact block (or some parts of it) not
arriving due to problems with the underlying network connection.
Those problems frequently occur but we mostly don't notice them
because we mostly use protocols that automatically re-request the
missing data.  However, requesting missing data triples the time to
receive it.  For example:

1. Alice sends some data to Bob
2. Bob doesn't receive the data (or it is damaged).   Bob re-requests
   the data from Alice
3. Alice sends the data again

A third technique is to assume all nodes receiving the data have
almost all of the same transactions in their mempool, so they can all
accept the same compact block.  That not only saves us time computing
a compact block at each hop but it means that all each hop can simply
relay the FEC packets to the next hop even before validating them.

The tradeoff for each of the above methods is that they work well with
centralization but not in a decentralized network where individual nodes
can't trust other nodes.  Servers in datacenters cost money and can
often be accessed by operators of the datacenter, making them less
trustworthy than a secure home computer.  Relaying data before
validating makes it easy to waste bandwidth, so it can only reasonably
be used on a private network where there's some level of trust and
accountability between parties.

The original
http://www.bitcoinrelaynetwork.org[Bitcoin Relay Network] was created by
developer Matt Corallo in 2015 to enable fast synchronization of
blocks between miners with very low latency. The network consisted of
several Virtual Private Servers (VPSes) hosted on
infrastructure around the world and served to connect the majority of
miners and mining pools.

((("Fast Internet Bitcoin Relay Engine (FIBRE)")))((("Compact Block
optimization")))The original Bitcoin Relay Network was replaced in 2016
with the introduction of the _Fast Internet Bitcoin Relay Engine_ or
http://bitcoinfibre.org[_FIBRE_], also created by developer Matt
Corallo. FIBRE is a UDP-based relay network that relays blocks within a
network of nodes. FIBRE implements FEC and the _compact block_ optimization to
further reduce the amount of data transmitted and the network latency.

=== Network Discovery

((("Bitcoin network", "extended network discovery",
id="BNextend08")))((("Bitcoin nodes", "network discovery",
id="BNodiscover08")))When a new node boots up, it must discover other
Bitcoin nodes on the network in order to participate. To start this
process, a new node must discover at least one existing node on the
network and connect to it. The geographic location of other nodes is
irrelevant; the Bitcoin network topology is not geographically defined.
Therefore, any existing Bitcoin nodes can be selected at random.

To connect to a known peer, nodes establish a TCP connection, usually to
port 8333 (the port generally known as the one used by Bitcoin), or an
alternative port if one is provided. Upon establishing a connection, the
node will start a "handshake" (see <<network_handshake>>) by
transmitting a  +version+ message, which contains basic identifying
information, including:

+nVersion+:: The Bitcoin P2P protocol version the client "speaks" (e.g., 70002)
+nLocalServices+:: A list of local services supported by the node, currently just +NODE_NETWORK+
+nTime+:: The current time
+addrYou+:: The IP address of the remote node as seen from this node
+addrMe+:: The IP address of the local node, as discovered by the local node
+subver+:: A sub-version showing the type of software running on this node (e.g., pass:[<span class="keep-together"><code>/Satoshi:0.9.2.1/</code></span>])
+BestHeight+:: The block height of this node's blockchain

(See http://bit.ly/1qlsC7w[GitHub] for an example of the +version+ network message.)

The +version+ message is always the first message sent by any peer to
another peer. The local peer receiving a +version+ message will examine
the remote peer's reported +nVersion+ and decide if the remote peer is
compatible. If the remote peer is compatible, the local peer will
acknowledge the +version+ message and establish a connection by sending
a +verack+.

How does a new node find peers? The first method is to query DNS using a
number of "DNS seeds," which are DNS servers that provide a list of IP
addresses of Bitcoin nodes. Some of those DNS seeds provide a static
list of IP addresses of stable Bitcoin listening nodes. Some of the DNS
seeds are custom implementations of BIND (Berkeley Internet Name Daemon)
that return a random subset from a list of Bitcoin node addresses
collected by a crawler or a long-running Bitcoin node.  The Bitcoin Core
client contains the names of several different DNS seeds. The diversity of
ownership and diversity of implementation of the different DNS seeds
offers a high level of reliability for the initial bootstrapping
process. In the Bitcoin Core client, the option to use the DNS seeds is
controlled by the option switch +-dnsseed+ (set to 1 by default, to use
the DNS seed).

Alternatively, a bootstrapping node that knows nothing of the network
must be given the IP address of at least one Bitcoin node, after which
it can establish connections through further introductions. The
command-line argument +-seednode+ can be used to connect to one node
just for introductions using it as a seed. After the initial seed node
is used to form introductions, the client will disconnect from it and
use the newly discovered peers.

[[network_handshake]]
.The initial handshake between peers
image::images/mbc2_0804.png["NetworkHandshake"]

Once one or more connections are established, the new node will send an
+addr+ message containing its own IP address to its neighbors. The
neighbors will, in turn, forward the +addr+ message to their neighbors,
ensuring that the newly connected node becomes well known and better
connected. Additionally, the newly connected node can send +getaddr+ to
the neighbors, asking them to return a list of IP addresses of other
peers. That way, a node can find peers to connect to and advertise its
existence on the network for other nodes to find it.
<<address_propagation>> ((("propagation", "address propagation and
discovery")))shows the address discovery protocol.


[[address_propagation]]
.Address propagation and discovery
image::images/mbc2_0805.png["AddressPropagation"]

A node must connect to a few different peers in order to establish
diverse paths into the Bitcoin network. Paths are not reliable—nodes
come and go—and so the node must continue to discover new nodes as it
loses old connections as well as assist other nodes when they bootstrap.
Only one connection is needed to bootstrap, because the first node can
offer introductions to its peer nodes and those peers can offer further
introductions. It's also unnecessary and wasteful of network resources
to connect to more than a handful of nodes. After bootstrapping, a node
will remember its most recent successful peer connections, so that if it
is rebooted it can quickly reestablish connections with its former peer
network. If none of the former peers respond to its connection request,
the node can use the seed nodes to bootstrap again.

On a node running the Bitcoin Core client, you can list the peer
connections with the command +getpeerinfo+:

[source,bash]
----
$ bitcoin-cli getpeerinfo
----
[source,json]
----
[
  {
    "id": 0,
    "addr": "82.64.116.5:8333",
    "addrbind": "192.168.0.133:50564",
    "addrlocal": "72.253.6.11:50564",
    "network": "ipv4",
    "services": "0000000000000409",
    "servicesnames": [
      "NETWORK",
      "WITNESS",
      "NETWORK_LIMITED"
    ],
    "lastsend": 1683829947,
    "lastrecv": 1683829989,
    "last_transaction": 0,
    "last_block": 1683829989,
    "bytessent": 3558504,
    "bytesrecv": 6016081,
    "conntime": 1683647841,
    "timeoffset": 0,
    "pingtime": 0.204744,
    "minping": 0.20337,
    "version": 70016,
    "subver": "/Satoshi:24.0.1/",
    "inbound": false,
    "bip152_hb_to": true,
    "bip152_hb_from": false,
    "startingheight": 788954,
    "presynced_headers": -1,
    "synced_headers": 789281,
    "synced_blocks": 789281,
    "inflight": [
    ],
    "relaytxes": false,
    "minfeefilter": 0.00000000,
    "addr_relay_enabled": false,
    "addr_processed": 0,
    "addr_rate_limited": 0,
    "permissions": [
    ],
    "bytessent_per_msg": {
      ...
    },
    "bytesrecv_per_msg": {
      ...
    },
    "connection_type": "block-relay-only"
  },
]
----

To override the automatic management of peers and to specify a list of
IP addresses, users can provide the option +-connect=<IPAddress>+ and
specify one or more IP addresses. If this option is used, the node will
only connect to the selected IP addresses, instead of discovering and
maintaining the peer connections automatically.

If there is no traffic on a connection, nodes will periodically send a
message to maintain the connection. If a node has not communicated on a
connection for too long, it is assumed to be disconnected
and a new peer will be sought. Thus, the network dynamically adjusts to
transient nodes and network problems, and can organically grow and
shrink as needed without any central control.((("",
startref="BNextend08")))((("", startref="BNodiscover08")))

=== Full Nodes

Full nodes are nodes that verify every transaction in every block on the
valid block chain with the most proof of work.

((("blocks", "genesis block")))((("genesis block")))((("blockchain
(the)", "genesis block")))Full nodes
independently process every block, starting with the very first
block (genesis block) and building up to the latest known block in the
network. A full node can independently and authoritatively
verify any transaction without recourse or reliance on any other node or
source of information. The full node relies on the network to
receive updates about new blocks of transactions, which it then verifies
and incorporates into its local view of which scripts control which
Bitcoins, called the set of _unspent transaction outputs_ (UTXOs).

((("Bitcoin nodes", "full nodes")))Running a full node gives
you the pure Bitcoin experience: independent verification of all
transactions without the need to rely on, or trust, any other systems.

((("Satoshi client")))There are a few alternative implementations of
full nodes, built using different programming
languages and software architectures, or which made different design
decisions. However, the most common
implementation is Bitcoin Core.
More than 95% of full nodes on the Bitcoin network run
various versions of Bitcoin Core. It is identified as "Satoshi" in the
sub-version string sent in the +version+ message and shown by the
command +getpeerinfo+ as we saw earlier; for example, +/Satoshi:24.0.1/+.

=== Exchanging "Inventory"

((("Bitcoin network", "syncing the blockchain")))The first thing a full
node will do once it connects to peers is try to construct a complete
chain of block headers. If it is a brand-new node and has no blockchain at all, it
only knows one block, the genesis block, which is statically embedded in
the client software. Starting with block #0 (the genesis block), the new
node will have to download hundreds of thousands of blocks to
synchronize with the network and reestablish the full blockchain.

((("blockchain (the)", "syncing the blockchain")))((("syncing")))The
process of syncing the blockchain starts with the +version+ message,
because that contains +BestHeight+, a node's current blockchain height
(number of blocks). A node will see the +version+ messages from its
peers, know how many blocks they each have, and be able to compare to
how many blocks it has in its own blockchain. Peered nodes will exchange
a +getheaders+ message that contains the hash (fingerprint) of the top
block on their local blockchain. One of the peers will be able to
identify the received hash as belonging to a block that is not at the
top, but rather belongs to an older block, thus deducing that its own
local blockchain is longer than its peer's.

The peer that has the longer blockchain has more blocks than the other
node and can identify which headers the other node needs in order to
"catch up." It will identify the first 2,000 headers to share using a
+headers+ message.  The node will keep requesting additional headers
until it has received one for every block the remote peer claims to
have.

In parallel, the node will begin requesting the blocks for each header
it previously received using a +getdata+ message.  The node will request
different blocks from each of its peers, which allows it to drop
connections to peers that are significantly slower than the average in
order to find newer (and possibly faster) peers.

Let's assume, for example, that a node only has the genesis block. It
will then receive an +headers+ message from its peers containing the headers
of the next 2,000 blocks in the chain. It will start requesting blocks
from all of its connected peers, keeping a queue of up to 1,024 blocks.
Blocks need to be validated in order, so if the oldest block in the
queue--the block the node next needs to validate--hasn't been received 
yet, the node drops the connection to the peer that was supposed to
provide that block.  It then finds a new peer that may be able to
provide one block before all of the node's other peers are able to
provide 1,023 blocks.

As each block is received, it is added to the
blockchain, as we will see in <<blockchain>>. As the local blockchain is
gradually built up, more blocks are requested and received, and the
process continues until the node catches up to the rest of the network.

This process of comparing the local blockchain with the peers and
retrieving any missing blocks happens any time a node goes offline for
an extended period of time. 

//FIXME?
//[[inventory_synchronization]]
//[role="smallerfifty"]
//.Node synchronizing the blockchain by retrieving blocks from a peer
//image::images/mbc2_0806.png["InventorySynchronization"]

[[spv_nodes]]
=== Simplified Payment Verification (SPV) Nodes

((("bitcoin network", "SPV clients", id="BNspvnodes08")))((("bitcoin
nodes", "SPV clients", id="BNospv08")))((("simple-payment-verification
(SPV)", id="simple08")))Many Bitcoin clients are designed to run on space- and
power-constrained devices, such as smartphones, tablets, or embedded
systems. For such devices, a _simplified payment verification_ (SPV)
method is used to allow them to operate without validating the full
blockchain. These types of clients are called SPV clients or lightweight
clients.

SPV clients download only the block headers and do not download the
transactions included in each block. The resulting chain of blocks,
without transactions, is about 10,000 times smaller than the full blockchain.
SPV clients cannot construct a full picture of all the UTXOs that are
available for spending because they do not know about all the
transactions on the network. SPV clients verify transactions using a
slightly different method that relies on peers to provide partial views
of relevant parts of the blockchain on demand.

As an analogy, a full node is like a tourist in a strange city, equipped
with a detailed map of every street and every address. By comparison, an
SPV node is like a tourist in a strange city asking random strangers for
turn-by-turn directions while knowing only one main avenue. Although
both tourists can verify the existence of a street by visiting it, the
tourist without a map doesn't know what lies down any of the side
streets and doesn't know what other streets exist. Positioned in front
of 23 Church Street, the tourist without a map cannot know if there are
a dozen other "23 Church Street" addresses in the city and whether this
is the right one. The mapless tourist's best chance is to ask enough
people and hope some of them are not trying to mug him.

SPV verifies transactions by reference to their _depth_ in the blockchain instead of their _height_. Whereas a full node will construct a fully verified chain of thousands of blocks and millions of transactions reaching down the blockchain (back in time) all the way to the genesis block, an SPV node will verify the proof of work of all blocks (but not whether the blocks and all of their transactions are valid) and link that chain to the transaction of interest.

For example, when examining a transaction in block 800,000, a full node
verifies all 800,000 blocks down to the genesis block and builds a full
database of UTXOs, establishing the validity of the transaction by
confirming that the transaction exists and its output remains unspent. A SPV client can
only verify that the transaction exists. The client establishes a link
between the transaction and the block that contains it, using a _merkle
path_ (see <<merkle_trees>>). Then, the SPV client waits until it sees the
six blocks 800,001 through 800,006 piled on top of the block containing
the transaction and verifies it by establishing its depth under blocks
800,006 to 800,001. The fact that other nodes on the network accepted
block 800,000 and that miners did the necessary work to produce six more blocks
on top of it is proof, by proxy, that the transaction actually exists.

An SPV client cannot normally be persuaded that a transaction exists in a block
when the transaction does not in fact exist. The SPV client establishes
the existence of a transaction in a block by requesting a merkle path
proof and by validating the Proof-of-Work in the chain of blocks.
However, a transaction's existence can be "hidden" from an SPV client. An
SPV client can definitely prove that a transaction exists but cannot
verify that a transaction, such as a double-spend of the same UTXO,
doesn't exist because it doesn't have a record of all transactions. This
vulnerability can be used in a denial-of-service attack or for a
double-spending attack against SPV clients. To defend against this, an SPV
client needs to connect randomly to several clients, to increase the
probability that it is in contact with at least one honest node. This
need to randomly connect means that SPV clients also are vulnerable to
network partitioning attacks or Sybil attacks, where they are connected
to fake nodes or fake networks and do not have access to honest nodes or
the real Bitcoin network.

For many practical purposes, well-connected SPV clients are secure enough,
striking a balance between resource needs, practicality, and security.
For infallible security, however, nothing beats running a full
node.

[TIP]
====
A full node verifies a transaction by checking the entire chain of
thousands of blocks below it in order to guarantee that the UTXO exists
and is not spent, whereas an SPV client only proves that a transaction
exists and checks how deep the block containing that transaction is
buried by a handful of blocks above it.
====

To get the block headers it needs to verify a transaction is part of the
chain, SPV clients use a +getheaders+ message.
The responding peer will send up to 2,000 block headers
using a single +headers+ message.  See the illustration in
<<spv_synchronization>>.

[[spv_synchronization]]
.SPV client synchronizing the block headers
image::images/mbc2_0807.png["SPVSynchronization"]

Shortly after the introduction of SPV/lightweight clients, Bitcoin
developers added a feature called _bloom filters_ to address the privacy
risks of SPV clients. Bloom filters allow SPV clients to receive a subset of
the transactions without revealing precisely which addresses they are
interested in, through a filtering mechanism that uses probabilities
rather than fixed patterns.((("", startref="BNspvnodes08")))((("",
startref="simple08")))

[[bloom_filters]]
=== Bloom Filters

((("bitcoin network", "bloom filters", id="BNebloom08")))((("bloom
filters", id="bloom08")))((("privacy, maintaining",
id="privacy08")))((("security", "maintaining privacy",
id="Sprivacy08")))A bloom filter is a probabilistic search filter, a way
to describe a desired pattern without specifying it exactly. Bloom
filters offer an efficient way to express a search pattern while
protecting privacy. They are used by SPV clients to ask their peers for
transactions matching a specific pattern, without revealing exactly
which addresses, keys, or transactions they are searching for.

In our previous analogy, a tourist without a map is asking for
directions to a specific address, "23 Church St." If she asks strangers
for directions to this street, she inadvertently reveals her
destination. A bloom filter is like asking, "Are there any streets in
this neighborhood whose name ends in R-C-H?" A question like that
reveals slightly less about the desired destination than asking for "23
Church St." Using this technique, a tourist could specify the desired
address in more detail such as "ending in U-R-C-H" or less detail as
"ending in H." By varying the precision of the search, the tourist
reveals more or less information, at the expense of getting more or less
specific results. If she asks a less specific pattern, she gets a lot
more possible addresses and better privacy, but many of the results are
irrelevant. If she asks for a very specific pattern, she gets fewer
results but loses privacy.

Bloom filters serve this function by allowing an SPV client to specify a
search pattern for transactions that can be tuned toward precision or
privacy. A more specific bloom filter will produce accurate results, but
at the expense of revealing what patterns the SPV client is interested in,
thus revealing the addresses owned by the user's wallet. A less specific
bloom filter will produce more data about more transactions, many
irrelevant to the client, but will allow the client to maintain better
privacy.

==== How Bloom Filters Work

Bloom filters are implemented as a variable-size array of N binary
digits (a bit field) and a variable number of M hash functions. The hash
functions are designed to always produce an output that is between 1 and
N, corresponding to the array of binary digits. The hash functions are
generated deterministically, so that any client implementing a bloom
filter will always use the same hash functions and get the same results
for a specific input. By choosing different length (N) bloom filters and
a different number (M) of hash functions, the bloom filter can be tuned,
varying the level of accuracy and therefore privacy.

In <<bloom1>>, we use a very small array of 16 bits and a set of three
hash functions to demonstrate how bloom filters work.

[[bloom1]]
.An example of a simplistic bloom filter, with a 16-bit field and three hash functions
image::images/mbc2_0808.png["Bloom1"]

The bloom filter is initialized so that the array of bits is all zeros.
To add a pattern to the bloom filter, the pattern is hashed by each hash
function in turn. Applying the first hash function to the input results
in a number between 1 and N. The corresponding bit in the array (indexed
from 1 to N) is found and set to +1+, thereby recording the output of
the hash function. Then, the next hash function is used to set another
bit and so on. Once all M hash functions have been applied, the search
pattern will be "recorded" in the bloom filter as M bits that have been
changed from +0+ to +1+.

<<bloom2>> is an example of adding a pattern "A" to the simple bloom filter shown in <<bloom1>>.

Adding a second pattern is as simple as repeating this process. The
pattern is hashed by each hash function in turn and the result is
recorded by setting the bits to +1+. Note that as a bloom filter is
filled with more patterns, a hash function result might coincide with a
bit that is already set to +1+, in which case the bit is not changed. In
essence, as more patterns record on overlapping bits, the bloom filter
starts to become saturated with more bits set to +1+ and the accuracy of
the filter decreases. This is why the filter is a probabilistic data
structure—it gets less accurate as more patterns are added. The accuracy
depends on the number of patterns added versus the size of the bit array
(N) and number of hash functions (M). A larger bit array and more hash
functions can record more patterns with higher accuracy. A smaller bit
array or fewer hash functions will record fewer patterns and produce
less accuracy.

[[bloom2]]
.Adding a pattern "A" to our simple bloom filter
image::images/mbc2_0809.png["Bloom2"]

<<bloom3>> is an example of adding a second pattern "B" to the simple bloom filter.

[[bloom3]]
[role="smallereighty"]
.Adding a second pattern "B" to our simple bloom filter
image::images/mbc2_0810.png["Bloom3"]

To test if a pattern is part of a bloom filter, the pattern is hashed by
each hash function and the resulting bit pattern is tested against the
bit array. If all the bits indexed by the hash functions are set to +1+,
then the pattern is _probably_ recorded in the bloom filter. Because the
bits may be set because of overlap from multiple patterns, the answer is
not certain, but is rather probabilistic. In simple terms, a bloom
filter positive match is a "Maybe, Yes."

<<bloom4>> is an example of testing the existence of pattern "X" in the
simple bloom filter. The corresponding bits are set to +1+, so the
pattern is probably a match.

[[bloom4]]
[role="smallereighty"]
.Testing the existence of pattern "X" in the bloom filter. The result is a probabilistic positive match, meaning "Maybe."
image::images/mbc2_0811.png["Bloom4"]

On the contrary, if a pattern is tested against the bloom filter and any
one of the bits is set to +0+, this proves that the pattern was not
recorded in the bloom filter. A negative result is not a probability, it
is a certainty. In simple terms, a negative match on a bloom filter is a
"Definitely Not!"

<<bloom5>> is an example of testing the existence of pattern "Y" in the
simple bloom filter. One of the corresponding bits is set to +0+, so the
pattern is definitely not a match.

[[bloom5]]
.Testing the existence of pattern "Y" in the bloom filter. The result is a definitive negative match, meaning "Definitely Not!"
image::images/mbc2_0812.png[]

=== How SPV clients Use Bloom Filters

Bloom filters are used to filter the transactions (and blocks containing
them) that an SPV client receives from its peers, selecting only
transactions of interest to the SPV client without revealing which
addresses or keys it is interested in.

((("transaction IDs (txid)")))An SPV client will initialize a bloom filter
as "empty"; in that state the bloom filter will not match any patterns.
The SPV client will then make a list of all the addresses, keys, and
hashes that it is interested in. It will do this by extracting the
public key hash and script hash and transaction IDs from any UTXO
controlled by its wallet. The SPV client then adds each of these to the
bloom filter, so that the bloom filter will "match" if these patterns
are present in a transaction, without revealing the patterns themselves.

((("Bitcoin nodes", "full nodes")))The SPV client will then send a
+filterload+ message to the peer, containing the bloom filter to use on
the connection. On the peer, bloom filters are checked against each
incoming transaction. The full node checks several parts of the
transaction against the bloom filter, looking for a match including:

* The transaction ID
* The data components from the locking scripts of each of the transaction outputs (every key and hash in the script)
* Each of the transaction inputs
* Each of the input signature data components (or witness scripts)

By checking against all these components, bloom filters can be used to
match public key hashes, scripts, +OP_RETURN+ values, public keys in
signatures, or any future component of a smart contract or complex
script.

After a filter is established, the peer will then test each
transaction's outputs against the bloom filter. Only transactions that
match the filter are sent to the client.

In response to a +getdata+ message from the client, peers will send a
+merkleblock+ message that contains only block headers for blocks
matching the filter and a merkle path (see <<merkle_trees>>) for each
matching transaction. The peer will then also send +tx+ messages
containing the transactions matched by the filter.

As the full node sends transactions to the SPV client, the SPV client
discards any false positives and uses the correctly matched transactions
to update its UTXO set and wallet balance. As it updates its own view of
the UTXO set, it also modifies the bloom filter to match any future
transactions referencing the UTXO it just found. The full node then uses
the new bloom filter to match new transactions and the whole process
repeats.

The client setting the bloom filter can interactively add patterns to the
filter by sending a +filteradd+ message. To clear the bloom filter, the
client can send a +filterclear+ message. Because it is not possible to
remove a pattern from a bloom filter, a client has to clear and resend a
new bloom filter if a pattern is no longer desired.

The network protocol and bloom filter mechanism for SPV clients is defined
in http://bit.ly/1x6qCiO[BIP-37 (Peer Services)].((("",
startref="BNebloom08")))((("", startref="bloom08")))

=== SPV Clients and Privacy

Clients that implement SPV have weaker privacy than a full node. A full
node receives all transactions and therefore reveals no information
about whether it is using some address in its wallet. An SPV client
receives a filtered list of transactions related to the addresses that
are in its wallet. As a result, it reduces the privacy of the owner.

Bloom filters are a way to reduce the loss of privacy. Without them, an
SPV client would have to explicitly list the addresses it was interested
in, creating a serious breach of privacy. However, even with bloom
filters, an adversary monitoring the traffic of an SPV client or
connected to it directly as a node in the P2P network can collect enough
information over time to learn the addresses in the wallet of the SPV
client.

=== Encrypted and Authenticated Connections

((("Bitcoin network", "encrypted
connections")))((("encryption")))((("authentication")))Most new users of
Bitcoin assume that the network communications of a Bitcoin node are
encrypted. In fact, the original implementation of bitcoin communicates
entirely in the clear. While this is not a major privacy concern for
full nodes, it is a big problem for SPV clients.

As a way to increase the privacy and security of the Bitcoin P2P
network, there are two solutions that provide encryption of the
communications: _Tor Transport_ and _P2P Authentication and Encryption_
with BIP-150/151.

==== Tor Transport

((("Tor network")))((("The Onion Routing network (Tor)")))Tor, which
stands for _The Onion Routing network_, is a software project and
network that offers encryption and encapsulation of data through
randomized network paths that offer anonymity, untraceability and
privacy.

Bitcoin Core offers several configuration options that allow you to run
a Bitcoin node with its traffic transported over the Tor network. In
addition, Bitcoin Core can also offer a Tor hidden service allowing
other Tor nodes to connect to your node directly over Tor.

As of Bitcoin Core version 0.12, a node will offer a hidden Tor service
automatically if it is able to connect to a local Tor service. If you
have Tor installed and the Bitcoin Core process runs as a user with
adequate permissions to access the Tor authentication cookie, it should
work automatically. Use the +debug+ flag to turn on Bitcoin Core's
debugging for the Tor service like this:

----
$ bitcoind --daemon --debug=tor
----

You should see "tor: ADD_ONION successful" in the logs, indicating that
Bitcoin Core has added a hidden service to the Tor network.

You can find more instructions on running Bitcoin Core as a Tor hidden
service in the Bitcoin Core documentation (_docs/tor.md_) and various
online tutorials.

==== Peer-to-Peer Authentication and Encryption

((("Peer-to-Peer authentication and encryption")))((("bitcoin
improvement proposals", "Peer Authentication (BIP-150)")))((("bitcoin
improvement proposals", "Peer-to-Peer Communication Encryption
(BIP-151)")))Two Bitcoin Improvement Proposals, BIP-150 and BIP-151, add
support for P2P authentication and encryption in the Bitcoin P2P
network.  These two BIPs define optional services that may be offered by
compatible Bitcoin nodes. BIP-151 enables negotiated encryption for all
communications between two nodes that support BIP-151. BIP-150 offers
optional peer authentication that allows nodes to authenticate each
other's identity using ECDSA and private keys. BIP-150 requires that
prior to authentication the two nodes have established encrypted
communications as per BIP-151.

As of January 2017, BIP-150 and BIP-151 are not implemented in Bitcoin
Core. However, the two proposals have been implemented by at least one
alternative Bitcoin client named bcoin.

BIP-150 and BIP-151 allow users to run SPV clients that connect to a
trusted full node, using encryption and authentication to protect the
privacy of the SPV client.

Additionally, authentication can be used to create networks of trusted
Bitcoin nodes and prevent Man-in-the-Middle attacks. Finally, P2P
encryption, if deployed broadly, would strengthen the resistance of
Bitcoin to traffic analysis and privacy-eroding surveillance, especially
in totalitarian countries where internet use is heavily controlled and
monitored.

((("", startref="BNospv08")))((("", startref="privacy08")))((("",
startref="Sprivacy08")))The standard is defined in
https://github.com/bitcoin/bips/blob/master/bip-0150.mediawiki[BIP-150
(Peer Authentication)] and
https://github.com/bitcoin/bips/blob/master/bip-0151.mediawiki[BIP-151
(Peer-to-Peer Communication Encryption)].

=== Transaction Pools

((("Bitcoin network", "transaction pools")))((("transaction
pools")))((("memory pools (mempools)")))Almost every node on the Bitcoin
network maintains a temporary list of unconfirmed transactions called
the _memory pool_, _mempool_, or _transaction pool_. Nodes use this pool
to keep track of transactions that are known to the network but are not
yet included in the blockchain. For example, a wallet node will use the
transaction pool to track incoming payments to the user's wallet that
have been received on the network but are not yet confirmed.

As transactions are received and verified, they are added to the
transaction pool and relayed to the neighboring nodes to propagate on
the network.

((("orphan pools")))((("transactions", "orphaned")))Some node
implementations also maintain a separate pool of orphaned transactions.
If a transaction's inputs refer to a transaction that is not yet known,
such as a missing parent, the orphan transaction will be stored
temporarily in the orphan pool until the parent transaction arrives.

When a transaction is added to the transaction pool, the orphan pool is
checked for any orphans that reference this transaction's outputs (its
children). Any matching orphans are then validated. If valid, they are
removed from the orphan pool and added to the transaction pool,
completing the chain that started with the parent transaction. In light
of the newly added transaction, which is no longer an orphan, the
process is repeated recursively looking for any further descendants,
until no more descendants are found. Through this process, the arrival
of a parent transaction triggers a cascade reconstruction of an entire
chain of interdependent transactions by re-uniting the orphans with
their parents all the way down the chain.

Both the transaction pool and orphan pool (where implemented) are stored
in local memory and are not saved on persistent storage; rather, they
are dynamically populated from incoming network messages. When a node
starts, both pools are empty and are gradually populated with new
transactions received on the network.

Some implementations of the Bitcoin client also maintain an UTXO
database or pool, which is the set of all unspent outputs on the
blockchain. Although the name "UTXO pool" sounds similar to the
transaction pool, it represents a different set of data. Unlike the
transaction and orphan pools, the UTXO pool is not initialized empty but
instead contains millions of entries of unspent transaction outputs,
everything that is unspent from all the way back to the genesis block.
The UTXO pool may be housed in local memory or as an indexed database
table on persistent storage.

Whereas the transaction and orphan pools represent a single node's local
perspective and might vary significantly from node to node depending
upon when the node was started or restarted, the UTXO pool represents
the emergent consensus of the network and therefore will vary little
between nodes. Furthermore, the transaction and orphan pools only
contain unconfirmed transactions, while the UTXO pool only contains
confirmed outputs.