mirror of
https://github.com/bitdefender/bddisasm.git
synced 2024-11-26 01:18:06 +00:00
1396 lines
59 KiB
Python
1396 lines
59 KiB
Python
#
|
|
# Copyright (c) 2020 Bitdefender
|
|
# SPDX-License-Identifier: Apache-2.0
|
|
#
|
|
import os
|
|
import sys
|
|
import re
|
|
import glob
|
|
|
|
|
|
valid_attributes = {
|
|
'MODRM', # Mod r/m is present.
|
|
'II64', # Instruction invalid in 64 bit mode.
|
|
'F64', # Operand size forced to 64 bit.
|
|
'D64', # Operand size defaults to 64 bit.
|
|
'O64', # Instruction valid only in 64 bit mode.
|
|
'SSECONDB', # Instruction has condition byte.
|
|
'COND', # Instruction has predicated encoded in lower 4 bit of the opcode.
|
|
'VSIB', # Instruction uses VSIB addressing.
|
|
'MIB', # Instruction uses MIB addressing.
|
|
'LIG', # *vex.L is ignored.
|
|
'WIG', # *vex.W is ignored.
|
|
'3DNOW', # Instruction uses 3dnow encoding.
|
|
'MMASK', # Instruction must have mask specified (mask cannot be k0).
|
|
'NOMZ', # Zeroing not allowed with memory addressing.
|
|
'LOCKSP', # Special lock - MOV CR on amd can use LOCK to access CR8 in 32 bit mode.
|
|
'NOL0', # Vector length 128 not supported.
|
|
'NOA16', # 16 bit addressing not supported.
|
|
'NO66', # 0x66 prefix causes #UD.
|
|
'NORIPREL', # RIP relative addressing not supported.
|
|
'VECT', # Vector instruction.
|
|
'S66', # 0x66 prefix changes length even if it is in special map (66, f2, f3).
|
|
'BITBASE', # Instruction uses bitbase addressing.
|
|
'AG', # Instruction uses address generation, no memory access.
|
|
'SHS', # Instruction accesses the shadow stack.
|
|
'MFR', # The Mod inside Mod R/M is forced to register. No SIB/disp present.
|
|
'CETT', # Instruction is CET tracked.
|
|
'OP1DEF', # Operand 1 is default (implicit).
|
|
'OP2DEF', # Operand 2 is default (implicit).
|
|
'OP2SEXO1', # Operand 2 is sign-extended to the size of the first operand.
|
|
'OP3SEXO1', # Operand 3 is sign-extended to the size of the first operand.
|
|
'OP1SEXDW', # Operand 1 is sign-extended to the size of the default word.
|
|
'PREFIX', # Prefix.
|
|
'SERIAL', # Instruction is serializing.
|
|
'SIBMEM', # Instruction uses sibmem addressing (AMX instructions).
|
|
'I67', # Ignore the address size override (0x67) prefix in 64 bit mode.
|
|
'IER', # Ignore embedded rounding for the instruction.
|
|
}
|
|
|
|
#
|
|
# Explicit operands types.
|
|
#
|
|
valid_optype = [
|
|
'A', # Direct address: the instruction has no ModR/M byte; the address of the
|
|
# operand is encoded in the instruction. No base register, index register,
|
|
# or scaling factor can be applied (for example, far JMP (EA)).
|
|
'B', # The VEX.vvvv field of the VEX prefix selects a general purpose register.
|
|
'C', # The reg field of the ModR/M byte selects a control register (for example,
|
|
# MOV (0F20, 0F22)).
|
|
'D', # The reg field of the ModR/M byte selects a debug register (for example,
|
|
# MOV (0F21,0F23)).
|
|
'E', # A ModR/M byte follows the opcode and specifies the operand. The operand
|
|
# is either a general-purpose register or a memory address. If it is a
|
|
# memory address, the address is computed from a segment register and any
|
|
# of the following values: a base register, an index register, a scaling
|
|
# factor, a displacement.
|
|
'F', # EFLAGS/RFLAGS Register.
|
|
'G', # The reg field of the ModR/M byte selects a general register (for example,
|
|
# AX (000)).
|
|
'H', # The VEX.vvvv field of the VEX prefix selects a 128-bit XMM register or a
|
|
# 256-bit YMM register, determined by operand type. For legacy SSE
|
|
# encodings this operand does not exist, changing the instruction to
|
|
# destructive form. Addition: 512 bit ZMM register may also be selected in
|
|
# EVEX encodings.
|
|
'I', # Immediate data: the operand value is encoded in subsequent bytes of the
|
|
# instruction.
|
|
'J', # The instruction contains a relative offset to be added to the instruction
|
|
# pointer register (for example, JMP (0E9), LOOP).
|
|
'K', # The operand is the stack.
|
|
'L', # The upper 4 bits of the 8-bit immediate selects a 128-bit XMM register
|
|
# or a 256-bit YMM register, determined by operand type. (the MSB is
|
|
# ignored in 32-bit mode). Addition: a 512 bit ZMM register may also be
|
|
# selected using EVEX encoding.
|
|
'M', # The ModR/M byte may refer only to memory (for example, BOUND, LES, LDS,
|
|
# LSS, LFS, LGS, CMPXCHG8B).
|
|
'N', # The R/M field of the ModR/M byte selects a packed-quadword, MMX
|
|
# technology register.
|
|
'O', # The instruction has no ModR/M byte. The offset of the operand is coded
|
|
# as a word or double word (depending on address size attribute) in the
|
|
# instruction. No base register, index register, or scaling factor can be
|
|
# applied (for example, MOV (A0-A3)).
|
|
'P', # The reg field of the ModR/M byte selects a packed quadword MMX technology
|
|
# register.
|
|
'Q', # A ModR/M byte follows the opcode and specifies the operand. The operand
|
|
# is either an MMX technology register or a memory address. If it is a
|
|
# memory address, the address is computed from a segment register and any
|
|
# of the following values: a base register, an index register, a scaling
|
|
# factor, and a displacement.
|
|
'R', # The R/M field of the ModR/M byte may refer only to a general register
|
|
# (for example, MOV (0F20-0F23)).
|
|
'S', # The reg field of the ModR/M byte selects a segment register (for example, MOV (8C,8E)).
|
|
'T', # The reg field of the ModR/M byte selects a test register (for example, MOV (0F24, 0F26)).
|
|
'U', # The R/M field of the ModR/M byte selects a 128-bit XMM register or a 256-bit YMM register,
|
|
# determined by operand type. Addition: a 512-bit ZMM register may also be selected using EVEX
|
|
# encodings.
|
|
'V', # The reg field of the ModR/M byte selects a 128-bit XMM register or a 256-bit YMM register,
|
|
# determined by operand type. Addition: a 512-bit ZMM register may also be selected using
|
|
# EVEX encodings.
|
|
'W', # A ModR/M byte follows the opcode and specifies the operand. The operand is either a 128-bit
|
|
# XMM register, a 256-bit YMM register (determined by operand type), or a memory address. If it is
|
|
# a memory address, the address is computed from a segment register and any of the following values:
|
|
# a base register, an index register, a scaling factor, and a displacement. Addition:a 512-bit ZMM
|
|
# register may also be selected # using EVEX encodings.
|
|
'X', # Memory addressed by the DS:rSI register pair (for example, MOVS, CMPS, OUTS, or LODS).
|
|
'Y', # Memory addressed by the ES:rDI register pair (for example, MOVS, CMPS, INS, STOS, or SCAS).
|
|
'Z', # The low 3 bits inside the opcode select a general purpose register. R field inside REX may
|
|
# extend it.
|
|
'rB', # The reg field selects a BND register.
|
|
'mB', # The rm field selects A BND register or a memory location.
|
|
'rK', # The reg field selects a mask register.
|
|
'vK', # The vvvv field of the VEX prefix selects a mask register.
|
|
'mK', # The rm field selects e mask register.
|
|
'aK', # The aaa field inside evex selects a mask register which is used for masking of a destination
|
|
# operand.
|
|
'rM', # The reg field inside modrm encodes the base address of a memory operand. Default segment is ES.
|
|
'mM', # The rm field inside modrm encodes the base address of a memory operand, iregardless of the mod
|
|
# fields. Default segment is DS.
|
|
'rT', # The reg field inside modrm encodes a TMM register (AMX extension).
|
|
'mT', # The rm field inside modrm encodes a TMM register (AMX extension).
|
|
'vT', # The v field inside vex encodes a TMM register (AMX extension).
|
|
'm2zI', # Bits [1,0] of the immediate byte which selects the fourth register.
|
|
]
|
|
|
|
# Operand sizes.
|
|
valid_opsize = [
|
|
'a', # Two one-word operands in memory or two double-word operands in memory,
|
|
# depending on operand-size attribute (used only by the BOUND instruction).
|
|
'b', # Byte, regardless of operand-size attribute.
|
|
'c', # Byte or word, depending on operand-size attribute.
|
|
'd', # Doubleword, regardless of operand-size attribute.
|
|
|
|
'dq', # Double-quadword, regardless of operand-size attribute (XMM register or
|
|
# 128 bit memory location). A smaller quantity from the 128 bit register may be accessed.
|
|
|
|
'e', # eighth = word or dword or qword.
|
|
'f', # fourth = dword or qword or oword.
|
|
'h', # half = qword or oword or yword.
|
|
'n', # normal = 128, 256 or 512 bits, depending on vector length.
|
|
'u', # 256 or 512 bit, depending on vector length.
|
|
|
|
# VSIB addressing
|
|
'vm32x', # VSIB addressing, using DWORD indices in XMM register, select 32/64 bit.
|
|
'vm32y', # VSIB addressing, using DWORD indices in YMM register, select 32/64 bit.
|
|
'vm32z', # VSIB addressing, using DWORD indices in ZMM register, select 32/64 bit.
|
|
'vm32h', # VSIB addressing, using DWORD indices in half register, select 32/64 bit.
|
|
'vm32n', # VSIB addressing, using DWORD indices in normal register, select 32/64 bit.
|
|
'vm64x', # VSIB addressing, using QWORD indices in XMM register, select 32/64 bit.
|
|
'vm64y', # VSIB addressing, using QWORD indices in YMM register, select 32/64 bit.
|
|
'vm64z', # VSIB addressing, using QWORD indices in ZMM register, select 32/64 bit.
|
|
'vm64h', # VSIB addressing, using QWORD indices in half register, select 32/64 bit.
|
|
'vm64n', # VSIB addressing, using QWORD indices in normal register, select 32/64 bit.
|
|
|
|
# MIB addressing
|
|
'mib', # MIB addressing, the base & the index are used to form a pointer.
|
|
|
|
# Stack sizes and partial access
|
|
'v2', # Two stack words.
|
|
'v3', # Three stack words.
|
|
'v4', # Four stack words.
|
|
'v8', # Eight stack words.
|
|
|
|
# These are aliased over 'dq.*' encodings.
|
|
'o', # Always 128 bits/2 QWORDs. Same as 'dq'.
|
|
'oq', # 512 bit regardless the operand size/vector length.
|
|
'p', # 32, 48 or 80 bits pointer, depending on operand size.
|
|
'pd', # 128 bit or 256 bit double-precision fp data.
|
|
'ps', # 128 bit or 256 bit single-prevision fp data.
|
|
'q', # Always 1 QWORD.
|
|
'qq', # Always 4 QWORDs.
|
|
's', # 6-byte or 10-byte pseudo-descriptor.
|
|
'sd', # Scalar element of 128 bit double-precision fp data.
|
|
'ss', # Scalar element of 128 bit single-precision fp data.
|
|
'v', # WORD, DWORD or QWORD, depending on operand size.
|
|
'w', # Always WORD.
|
|
'x', # 128 bit, 256 bit, depending on operand size.
|
|
'y', # DWORD or QWORD, depending on operand size.
|
|
'yf', # Always QWORD in 64 bit mode and DWORD in 16/32 bit mode.
|
|
'z', # WORD for 16 bit op size, DWORD for 32 & 64 bit operand size.
|
|
'?', # Unknown operand size. Depends on many factors (for example, XSAVE).
|
|
'0', # Used for instructions that do not actually access any memory.
|
|
'asz', # The size of the operand is given by the current addressing mode.
|
|
'ssz', # The size of the operand is given by the current stack mode.
|
|
'fa', # FPU integer binary coded decimal.
|
|
'fw', # FPU real word.
|
|
'fd', # FPU real dword.
|
|
'fq', # FPU real qword.
|
|
'ft', # FPU real extended.
|
|
'fe', # FPU environment.
|
|
'fs', # FPU state.
|
|
'l', # Either a 64 bit or a 128 bit operand size (used by BNDMOV).
|
|
'rx', # 512 bytes extended state.
|
|
'cl', # 32/64/128 bytes - the size of one cache line.
|
|
'12', # 4 bytes (0) + 8 bytes (old SSP), used by SAVEPREVSSP.
|
|
't', # A tile register. The size varies dependning on execution environment, but can be as high as 1K.
|
|
|
|
'384', # 384 bits representing a Key Locker handle.
|
|
'512', # 512 bits representing a Key Locker handle.
|
|
]
|
|
|
|
# Implicit/fixed operands. Self explanatory.
|
|
valid_impops = {# register size
|
|
'AH' : ('AH', 'b'), # AH register.
|
|
'AL' : ('rAX', 'b'), # AL register.
|
|
'AX' : ('rAX', 'w'), # AX register.
|
|
'EAX' : ('rAX', 'd'), # EAX register.
|
|
'RAX' : ('rAX', 'q'), # RAX register.
|
|
'eAX' : ('rAX', 'z'), # AX or EAX register, depending on op size.
|
|
'rAX' : ('rAX', 'v'), # AX, EAX or RAX register, depending on op size.
|
|
'yAX' : ('rAX', 'y'), # EAX or RAX register, depending on op size.
|
|
'CL' : ('rCX', 'b'), # CL register.
|
|
'ECX' : ('rCX', 'd'), # ECX register.
|
|
'RCX' : ('rCX', 'q'), # RCX register.
|
|
'eCX' : ('rCX', 'z'), # CX or ECX register.
|
|
'rCX' : ('rCX', 'v'), # CX, ECX or RCX register, depending on op size.
|
|
'yCX' : ('rCX', 'y'), # ECX or RCX register, depending on op size.
|
|
'aCX' : ('rCX', 'asz'), # CX, ECX or RCX register, depedning on address size.
|
|
'DX' : ('rDX', 'w'), # DX register.
|
|
'EDX' : ('rDX', 'd'), # EDX register.
|
|
'RDX' : ('rDX', 'q'), # RDX register.
|
|
'eDX' : ('rDX', 'z'), # DX or EDX register, depending on op size.
|
|
'rDX' : ('rDX', 'v'), # DX, EDX or RDX register, depending on op size.
|
|
'yDX' : ('rDX', 'y'), # EDX or RDX register, depending on op size.
|
|
'EBX' : ('rBX', 'd'), # EBX register.
|
|
'RBX' : ('rBX', 'q'), # RBX register.
|
|
'rBX' : ('rBX', 'v'), # BX, EBX or RBX register, depending on op size.
|
|
'yBX' : ('rBX', 'y'), # EBX or RBX register, depending on op size.
|
|
'rBP' : ('rBP', 'v'), # BP, EBP or RBP register, depending on op size.
|
|
'sBP' : ('rBP', 'ssz'), # BP, EBP or RBP register, depending on stack size.
|
|
'rSP' : ('rSP', 'v'), # SP, ESP or RSP register, depending on op size.
|
|
'sSP' : ('rSP', 'ssz'), # SP, ESP or RSP register, depending on stack size.
|
|
'aSI' : ('rSI', 'asz'), # SI, ESI, or RSI register, depending on address size.
|
|
'aDI' : ('rDI', 'asz'), # DI, EDI, or RDI register, depending on address size.
|
|
'R8' : ('rR8', 'q'), # R8 register.
|
|
'R9' : ('rR9', 'q'), # R9 register.
|
|
'R11' : ('rR11', 'q'), # R11 register.
|
|
'rIP' : ('rIP', 'v'), # IP, EIP or RIP, depending on op size.
|
|
'yIP' : ('rIP', 'yf'), # EIP in 16/32 bit mode, or RIP in 64 bit mode.
|
|
'1' : ('1', 'b'), # Constant 1.
|
|
'XMM0' : ('XMM0', 'dq'), # XMM0 register.
|
|
'XMM1' : ('XMM1', 'dq'), # XMM1 register.
|
|
'XMM2' : ('XMM2', 'dq'), # XMM2 register.
|
|
'XMM3' : ('XMM3', 'dq'), # XMM3 register.
|
|
'XMM4' : ('XMM4', 'dq'), # XMM4 register.
|
|
'XMM5' : ('XMM5', 'dq'), # XMM5 register.
|
|
'XMM6' : ('XMM6', 'dq'), # XMM6 register.
|
|
'XMM7' : ('XMM7', 'dq'), # XMM7 register.
|
|
'ST(0)' : ('ST(0)', 'ft'), # ST(0) register.
|
|
'ST(i)' : ('ST(i)', 'ft'), # ST(1) register.
|
|
'CS' : ('CS', 'v'), # CS register.
|
|
'SS' : ('SS', 'v'), # SS register.
|
|
'DS' : ('DS', 'v'), # DS register.
|
|
'ES' : ('ES', 'v'), # ES register.
|
|
'FS' : ('FS', 'v'), # FS register.
|
|
'GS' : ('GS', 'v'), # GS register.
|
|
'CR0' : ('CR0', 'yf'), # CR0 register.
|
|
'XCR' : ('XCR', 'q'), # An XCR register.
|
|
'XCR0' : ('XCR0', 'q'), # XCR0 register.
|
|
'MSR' : ('MSR', 'q'), # A MSR.
|
|
'TSC' : ('TSC', 'q'), # TSC register.
|
|
'TSCAUX' : ('TSCAUX', 'q'), # TSXAUX register.
|
|
'SCS' : ('SCS', 'q'), # IA32_SYSNETER_CS register.
|
|
'SEIP' : ('SEIP', 'q'), # IA32_SYSENTER_EIP register.
|
|
'SESP' : ('SESP', 'q'), # IA32_SYSENTER_ESP register.
|
|
'FSBASE' : ('FSBASE', 'q'), # IA32_FS_BASE register.
|
|
'GSBASE' : ('GSBASE', 'q'), # IA32_GS_BASE register.
|
|
'KGSBASE' : ('KGSBASE', 'q'), # IA32_KERNEL_GS_BASE register.
|
|
'STAR' : ('STAR', 'q'), # IA32_STAR register.
|
|
'LSTAR' : ('LSTAR', 'q'), # IA32_LSTAR register.
|
|
'FMASK' : ('FMASK', 'q'), # IA32_FMASK register.
|
|
'GDTR' : ('GDTR', 's'), # GDT register.
|
|
'IDTR' : ('IDTR', 's'), # IDT register.
|
|
'LDTR' : ('LDTR', 'w'), # LDT register.
|
|
'TR' : ('TR', 'w'), # Task register.
|
|
'BANK' : ('BANK', '?'), # A register bank.
|
|
'X87CONTROL':('X87CONTROL', 'w'), # X87 control register.
|
|
'X87TAG' : ('X87TAG', 'w'), # X87 tag register.
|
|
'X87STATUS': ('X87STATUS', 'w'), # X87 status register.
|
|
'MXCSR' : ('MXCSR', 'd'), # MXCSR register.
|
|
'PKRU' : ('PKRU', 'd'), # PKRU register.
|
|
'SSP' : ('SSP', 'yf'), # Shadow stack pointer. 32 bit in protected/compat mode, 64 in long mode.
|
|
|
|
# Implicit memory operands.
|
|
'pBXALb' : ('pBXAL', 'b'), # Implicit [RBX + AL], as used by XLAT.
|
|
'pDIq' : ('pDI', 'q'), # Implicit qword [RDI].
|
|
'pDIdq' : ('pDI', 'dq'), # Implicit xmmword [RDI].
|
|
# Implicit shadow stack accesses.
|
|
'SHS' : ('SHS', 'q'), # Shadow stack (SSP) implicit access, 1 qword (use by CET instructions).
|
|
'SHS0' : ('SHS0', 'q'), # Shadow stack (IA32_PL0_SSP) implicit access, 1 qword (use by CET instructions).
|
|
'SHSI' : ('SHS', 'v2'), # Shadow stack load & discard, 2 elements (INCCSPD/INCSSPQ).
|
|
'SHSS' : ('SHS', '12'), # Shadow stack read & store 4 + 8 bytes (SAVEPREVSSP).
|
|
'SHS1' : ('SHSP', 'v'), # Shadow stack push/pop, 1 word.
|
|
'SHS2' : ('SHSP', 'v2'), # Shadow stack push/pop, 2 words.
|
|
'SHS3' : ('SHSP', 'v3'), # Shadow stack push/pop, 3 words.
|
|
'SHS4' : ('SHSP', 'v4'), # Shadow stack push/pop, 4 words.
|
|
# User Interrupt Flag.
|
|
'UIF' : ('UIF', 'b'), # User Interrupt Flag, stored with size of 1 byte, although it is 1 bit.
|
|
}
|
|
|
|
# If an operand type is not present here, than that operand is implicit & it's not encoded inside the instruction.
|
|
operand_encoding = {
|
|
'A' : 'D', # Immediate, encoded directly in the instruction bytes.
|
|
'B' : 'V', # VEX/EVEX.vvvv encoded general purpose register.
|
|
'C' : 'R', # Modrm.reg encoded control register.
|
|
'D' : 'R', # Modrm.reg encoded debug register.
|
|
'E' : 'M', # Modrm.rm encoded general purpose register or memory.
|
|
'G' : 'R', # Modrm.reg encoded general purpose register.
|
|
'H' : 'V', # VEX/EVEX.vvvv encoded vector register.
|
|
'I' : 'I', # Immediate, encoded directly in the instruction bytes.
|
|
'J' : 'D', # Relative offset, encoded directly in the instruction bytes.
|
|
'L' : 'L', # Register encoded in an immediate.
|
|
'M' : 'M', # Modrm.rm encoded memory.
|
|
'N' : 'M', # Modrm.rm encoded MMX register.
|
|
'O' : 'D', # Absolute memory encoded directly in the instruction.
|
|
'P' : 'R', # Modrm.reg encoded MMX register.
|
|
'Q' : 'M', # Modrm.rm encoded MMX register or memory.
|
|
'R' : 'M', # Modrm.rm encoded general purpose register.
|
|
'S' : 'R', # Modrm.reg encoded segment register.
|
|
'T' : 'R', # Modrm.reg encoded test register.
|
|
'U' : 'M', # Modrm.rm encoded vector register.
|
|
'V' : 'R', # Modrm.reg encoded vector register.
|
|
'W' : 'M', # Modrm.rm encoded vector register or memory.
|
|
'Z' : 'O', # General purpose register encoded in opcode low 3 bit.
|
|
'rB' : 'R', # Modrm.reg encoded bound register.
|
|
'mB' : 'M', # Modrm.rm encoded bound register or memory.
|
|
'rK' : 'R', # Modrm.reg encoded mask register.
|
|
'vK' : 'V', # VEX/EVEX.vvvv encoded mask register.
|
|
'mK' : 'M', # Modrm.rm encoded mask register or memory.
|
|
'aK' : 'A', # EVEX.aaa encoded mask register.
|
|
'mR' : 'R', # Modrm.reg encoded memory.
|
|
'mM' : 'M', # Modrm.rm encoded memory (always).
|
|
'1' : '1', # Constant 1.
|
|
'CL' : 'C', # CL register.
|
|
'ST(i)' : 'M', # Modrm.rm encoded FPU register.
|
|
}
|
|
|
|
valid_prefixes = [
|
|
'REP', # Rep prefix is accepted.
|
|
'REPC', # Conditional rep prefix is accepted.
|
|
'HLE', # Hardware Lock Elision accepted.
|
|
'BND', # Bound prefix accepted (MPX).
|
|
'LOCK', # Lock prefix accepted.
|
|
'BH', # Branch hints accepted.
|
|
'XACQUIRE', # Xacquire prefix accepted.
|
|
'XRELEASE', # Xrelease prefix accepted.
|
|
'HLEWOL', # HLE prefix is accepted without lock - used by MOV instructions.
|
|
'DNT', # Do Not Track prefix accepted (CET).
|
|
]
|
|
|
|
valid_access = [
|
|
'N', # No access.
|
|
'P', # Prefetch access.
|
|
'R', # Read.
|
|
'W', # Write.
|
|
'CR', # Conditional read.
|
|
'CW', # Conditional write.
|
|
'RW', # Read-Write.
|
|
'CRW', # Conditional Read-Write.
|
|
'RCW', # Read-Conditional Write.
|
|
'CRCW', # Conditional Read-Conditional Write.
|
|
]
|
|
|
|
valid_flags = [
|
|
'CF', # Carry.
|
|
'PF', # Parity.
|
|
'AF', # Auxiliary.
|
|
'ZF', # Zero.
|
|
'SF', # Sign.
|
|
'TF', # Trap.
|
|
'IF', # Interrupt.
|
|
'DF', # Direction.
|
|
'OF', # Overflow.
|
|
'IOPL', # I/O privilege level.
|
|
'NT', # Nested Task.
|
|
'RF', # Resume Flag.
|
|
'VM', # V8086 mmode.
|
|
'AC', # Alignment Check.
|
|
'VIF', # Virtual IF.
|
|
'VIP', # Virtual IP.
|
|
'ID' # CPUID ID flag.
|
|
]
|
|
|
|
valid_flag_op = [
|
|
'm', # modified.
|
|
't', # tested.
|
|
'0', # cleared.
|
|
'1', # set.
|
|
'u', # undefined.
|
|
'n', # not accessed.
|
|
]
|
|
|
|
valid_cpu_modes = [
|
|
'r0', # Ring 0.
|
|
'r1', # Ring 1.
|
|
'r2', # Ring 2.
|
|
'r3', # Ring 3.
|
|
'real', # Real mode.
|
|
'v8086', # V8086 mode.
|
|
'prot', # Protected mode.
|
|
'compat', # Compatibility mode.
|
|
'long', # Long mode.
|
|
'smm', # System Management Mode.
|
|
'smm_off', # Outside SMM.
|
|
'sgx', # Software Guard Extensions SGX enclave.
|
|
'sgx_off', # Outside SGX.
|
|
'tsx', # Transactional Synchronization Extensions.
|
|
'tsx_off', # Outside TSX.
|
|
'vmxr', # VMX root.
|
|
'vmxn', # VMX non-root.
|
|
'vmxr_seam', # VMX root SEAM.
|
|
'vmxn_seam', # VMX non-root SEAM.
|
|
'vmx_off', # Outside VMX operation.
|
|
]
|
|
|
|
valid_mode_groups = [
|
|
"ring",
|
|
"mode",
|
|
"vmx",
|
|
"other",
|
|
]
|
|
|
|
valid_ring_modes = [
|
|
"r0",
|
|
"r1",
|
|
"r2",
|
|
"r3",
|
|
]
|
|
|
|
valid_mode_modes = [
|
|
"real",
|
|
"v8086",
|
|
"prot",
|
|
"compat",
|
|
"long",
|
|
]
|
|
|
|
valid_vmx_modes = [
|
|
"vmxr",
|
|
"vmxn",
|
|
"vmxr_seam",
|
|
"vmxn_seam",
|
|
"vmx_off",
|
|
]
|
|
|
|
valid_other_modes = [
|
|
"smm",
|
|
"smm_off",
|
|
"sgx",
|
|
"sgx_off",
|
|
"tsx",
|
|
"tsx_off",
|
|
]
|
|
|
|
valid_mode_map = {
|
|
"ring" : valid_ring_modes,
|
|
"mode" : valid_mode_modes,
|
|
"vmx" : valid_vmx_modes,
|
|
"other" : valid_other_modes,
|
|
}
|
|
|
|
|
|
valid_decorators = [
|
|
'{K}', # Masking support.
|
|
'{z}', # Zeroing support.
|
|
'{sae}', # Surpress All Exceptions.
|
|
'{er}', # Embedded Rounding.
|
|
'|B32', # Broadcast 32.
|
|
'|B64', # Broadcast 64.
|
|
]
|
|
|
|
valid_tuples = [
|
|
'fv', # Full Vector, Load+Op (Full Vector Dword/Qword).
|
|
'hv', # Half Vector, Load+Op (Half Vector).
|
|
'fvm', # Full Vector Memory, Load/store or subDword full vector.
|
|
'hvm', # Half Vector Memory, SubQword Conversion.
|
|
'qvm', # Quarter Vector Memory, SubDword Conversion.
|
|
'ovm', # Oct Vector Memory, SubWord Conversion.
|
|
'dup', # Dup, VMOVDDUP.
|
|
'm128', # Mem 128, Shift count from memory.
|
|
't1s8', # Tuple 1 Scalar, 8 bit, 1Tuple less than Full Vector.
|
|
't1s16', # Tuple 1 Scalar, 16 bit, 1Tuple less than Full Vector.
|
|
't1s', # Tuple 1 Scalar, 32/64 bit, 1Tuple less than Full Vector.
|
|
't1f', # Tuple 1 Fixed, 1 Tuple memsize not affected by EVEX.W.
|
|
't2', # Tuple 2, Broadcast (2 elements).
|
|
't4', # Tuple 4, Broadcast (4 elements).
|
|
't8', # Tuple 8, Broadcast (8 elements).
|
|
't1_4x',
|
|
]
|
|
|
|
class InvalidEncodingException(Exception):
|
|
def __init__(self, value):
|
|
self.value = value
|
|
|
|
def __str__(self):
|
|
return repr(self.value)
|
|
|
|
class ParseLineException(Exception):
|
|
def __init__(self, value):
|
|
self.value = value
|
|
|
|
def __str__(self):
|
|
return repr(self.value)
|
|
|
|
|
|
def reverse_dict(d):
|
|
r = {}
|
|
for k in d:
|
|
r[d[k]] = k
|
|
return r
|
|
|
|
def my_str(x):
|
|
if x is None:
|
|
return x
|
|
else:
|
|
return str(x)
|
|
|
|
|
|
#
|
|
# CPUID feature flags.
|
|
#
|
|
class CpuidFeatureFlag():
|
|
def __init__(self, finfo):
|
|
self.Name = finfo["name"]
|
|
self.Leaf = finfo["leaf"]
|
|
self.SubLeaf = finfo["subleaf"]
|
|
self.Reg = finfo["reg"]
|
|
self.Bit = finfo["bit"]
|
|
|
|
def __str__(self):
|
|
return "%s: %s, %s, %s, %s" % (self.Name, self.Leaf, self.SubLeaf, self.Reg, self.Bit)
|
|
|
|
|
|
#
|
|
# Operand description
|
|
#
|
|
class Operand():
|
|
def __init__(self, op, access, flags, imp = False):
|
|
self.Raw = op
|
|
self.Type = 0
|
|
self.Size = 0
|
|
self.Flags = flags
|
|
self.Decorators = []
|
|
self.Access = []
|
|
self.Block = 0
|
|
self.Encoding = 'S'
|
|
self.Implicit = imp
|
|
orig = op
|
|
|
|
# Handle block registers.
|
|
if op.endswith('+3'):
|
|
self.Block = 4
|
|
op = op.replace('+3', '')
|
|
elif op.endswith('+1'):
|
|
self.Block = 2
|
|
op = op.replace('+1', '')
|
|
else:
|
|
m = re.match(r'XMM(\d)-(\d)', op)
|
|
if m:
|
|
start = m.group(1)
|
|
end = m.group(2)
|
|
self.Block = int(end) - int(start) + 1
|
|
op = 'XMM' + start
|
|
|
|
# Handle the decorators.
|
|
for dec in valid_decorators:
|
|
if -1 != op.find(dec):
|
|
# Found decorator.
|
|
self.Decorators.append(dec)
|
|
# Remove it from the opstring.
|
|
op = op.replace(dec, "")
|
|
|
|
# Handle hard-coded operators - those that are implicit/are not encoded anywhere.
|
|
if op in valid_impops:
|
|
self.Type, self.Size = valid_impops[op][0], valid_impops[op][1]
|
|
# Now handle explicit operators.
|
|
else:
|
|
# Attempt a match inside the explicit operands map.
|
|
for opt in valid_optype:
|
|
if op.startswith(opt):
|
|
self.Type = opt
|
|
op = op.replace(opt, "")
|
|
break
|
|
|
|
# Now the operand size. After parsing the decorator and the operand type, we should be left with
|
|
# the operand size only.
|
|
if self.Type in ['rK', 'mK', 'vK', 'aK'] and not op in valid_opsize:
|
|
self.Size = 'q'
|
|
elif op in valid_opsize:
|
|
self.Size = op
|
|
else:
|
|
raise InvalidEncodingException('Invalid operand size specified: ' + orig)
|
|
|
|
if self.Type in operand_encoding:
|
|
self.Encoding = operand_encoding[self.Type]
|
|
elif self.Raw in operand_encoding:
|
|
self.Encoding = operand_encoding[self.Raw]
|
|
|
|
if imp and 'OPDEF' not in self.Flags:
|
|
self.Flags.append('OPDEF')
|
|
|
|
self.Access = access
|
|
|
|
def __str__(self):
|
|
if True:
|
|
return self.Raw
|
|
|
|
|
|
#
|
|
# Prefixes.
|
|
#
|
|
class Prefix():
|
|
def __init__(self, prefix):
|
|
self.Mnemonic = prefix["mnemonic"]
|
|
self.Encoding = prefix["encoding"]
|
|
|
|
def __str__(self):
|
|
return self.Mnemonic
|
|
|
|
|
|
#
|
|
# Instructions.
|
|
#
|
|
class Instruction():
|
|
def __init__(self, iinfo):
|
|
# Fill in raw instruction information
|
|
self.Mnemonic = iinfo["mnemonic"]
|
|
self.RawEnc = iinfo["encoding"]
|
|
self.Flags = iinfo["flags"]
|
|
self.Prefmap = iinfo["prefixes"]
|
|
self.Set = iinfo["set"]
|
|
self.Category = iinfo["cat"]
|
|
self.Class = iinfo["class"]
|
|
self.Rwm = iinfo["rwm"]
|
|
self.Id = iinfo["cff"] or self.Set
|
|
self.Tuple = iinfo["tuple"]
|
|
self.ExClass = iinfo["exclass"]
|
|
self.RevFlagsAccess = iinfo["flgaccess"]
|
|
self.Modes = iinfo["modes"]
|
|
self.FpuFlags = iinfo["fpuflg"]
|
|
|
|
# First redirecton class: opcodes
|
|
self.Opcodes = []
|
|
self.Prefixes = []
|
|
self.DecoFlags = []
|
|
# Second redirection class: Modrm
|
|
self.HasModrm = self.ModrmRedirAfterMpref = False
|
|
self.Mod = self.Reg = self.Rm = None
|
|
# Third redirection class: mandatory prefix.
|
|
self.Np = self.MustHave66 = self.MustHaveF2 = self.MustHaveF3 = False
|
|
# Fourth redirection class: operating mode
|
|
self.RedM16 = self.RedM32 = self.RedM64 = False
|
|
# Fifth redirection class: default operand size
|
|
self.RedDs16 = self.RedDs32 = self.RedDs64 = self.RedDDs64 = self.RedFDs64 = False
|
|
# Sixth redirection class: default address size
|
|
self.RedAs16 = self.RedAs32 = self.RedAs64 = False
|
|
# Seventh redirecton class: rex, rex.w, rep, repz
|
|
self.RedRexB = self.RedRexW = self.RedRep = self.Red64 = self.RedF3 = False
|
|
# Misc - vendor
|
|
self.Vendor = None
|
|
# Misc - feature.
|
|
self.Feature = None
|
|
|
|
# XOP, VEX and EVEX classes.
|
|
self.Vex = self.Xop = self.Evex = self.Mvex = False
|
|
self.M = self.P = self.L = self.W = None
|
|
|
|
# Now parse each info chunk and extract the actual data
|
|
for t in iinfo["encoding"].split(' '):
|
|
if '0x66' == t and not self.Opcodes and not (self.Xop or self.Vex or self.Evex):
|
|
self.Prefixes.append(0x66)
|
|
self.MustHave66 = True
|
|
elif '0xF3' == t and not self.Opcodes and not (self.Xop or self.Vex or self.Evex):
|
|
self.Prefixes.append(0xF3)
|
|
self.MustHaveF3 = True
|
|
elif '0xF2' == t and not self.Opcodes and not (self.Xop or self.Vex or self.Evex):
|
|
self.Prefixes.append(0xF2)
|
|
self.MustHaveF2 = True
|
|
elif 'NP' == t:
|
|
self.Np = True
|
|
elif 'a0xF3' == t:
|
|
self.Prefixes.append(0xF3)
|
|
self.RedF3 = True
|
|
elif 'o64' == t:
|
|
self.Red64 = True
|
|
elif 'rexw' == t:
|
|
self.RedRexW = True
|
|
elif 'rexb' == t:
|
|
self.RedRexB = True
|
|
elif 'rep' == t:
|
|
self.RedRep = True
|
|
elif 'ds16' == t:
|
|
self.RedDs16 = True
|
|
elif 'ds32' == t:
|
|
self.RedDs32 = True
|
|
elif 'ds64' == t:
|
|
self.RedDs64 = True
|
|
elif 'dds64' == t:
|
|
self.RedDDs64 = True
|
|
elif 'fds64' == t:
|
|
self.RedFDs64 = True
|
|
elif 'as16' == t:
|
|
self.RedAs16 = True
|
|
elif 'as32' == t:
|
|
self.RedAs32 = True
|
|
elif 'as64' == t:
|
|
self.RedAs64 = True
|
|
elif t.startswith('/'):
|
|
self.HasModrm = True
|
|
self.Flags.append('MODRM')
|
|
if t.endswith(':mem'):
|
|
self.Mod = 'mem'
|
|
if t.endswith('reg'):
|
|
self.Mod = 'reg'
|
|
t = t.replace(':mem', '').replace(':reg', '')
|
|
for i in range(0, 8):
|
|
if '/%d' % i == t:
|
|
self.Reg = i
|
|
if re.match(r'0x[0-9a-fA-F]{2}', t[1:]):
|
|
mrm = int(t[1:], 16)
|
|
if 0xC0 == (mrm & 0xC0):
|
|
self.Mod = 'reg'
|
|
else:
|
|
self.Mod = 'mem'
|
|
self.Rm = mrm & 7
|
|
self.Reg = (mrm >> 3) & 7
|
|
elif 'modrm' == t:
|
|
self.HasModrm = True
|
|
self.Flags.append('MODRM')
|
|
elif t.startswith('mod:'):
|
|
self.Mod = t[4:]
|
|
if self.Mod not in ['mem', 'reg']:
|
|
raise InvalidEncodingException('Invalid encoding: illegal "mod" modifier')
|
|
elif t.startswith('reg:'):
|
|
self.Reg = t[4:]
|
|
if self.Reg not in ['0', '1', '2', '3', '4', '5', '6', '7']:
|
|
raise InvalidEncodingException('Invalid encoding: illegal "reg" value')
|
|
self.Reg = int(self.Reg)
|
|
elif t.startswith('rm:'):
|
|
self.Rm = t[3:]
|
|
if self.Rm not in ['0', '1', '2', '3', '4', '5', '6', '7']:
|
|
raise InvalidEncodingException('Invalid encoding: illegal "rm" value')
|
|
self.Rm = int(self.Rm)
|
|
elif t.startswith('modrmpmp'):
|
|
self.ModrmRedirAfterMpref = True
|
|
elif t == 'xop':
|
|
self.Xop = True
|
|
elif t == 'vex':
|
|
self.Vex = True
|
|
elif t == 'evex':
|
|
self.Evex = True
|
|
elif t == 'mvex':
|
|
self.Mvex = True
|
|
elif t.startswith('m:'):
|
|
self.M = t[2:]
|
|
if self.M not in ['0', '1', '2', '3', '4', '5', '6', '7', '8', '9', 'A', 'B', 'C']:
|
|
raise InvalidEncodingException('Invalid encoding: illegal "mmmmm" value')
|
|
self.M = int(self.M, 16)
|
|
elif t.startswith('p:'):
|
|
self.P = t[2:]
|
|
if not self.P in ['0', '1', '2', '3']:
|
|
raise InvalidEncodingException('Invalid encoding: illegal "pp" value!')
|
|
self.P = int(self.P)
|
|
elif t.startswith('l:'):
|
|
self.L = t[2:]
|
|
if self.L == '128':
|
|
self.L = 0
|
|
elif self.L == '256':
|
|
self.L = 1
|
|
elif self.L == '512':
|
|
self.L = 2
|
|
elif self.L == 'x':
|
|
self.L = None
|
|
elif self.L == 'i':
|
|
self.L = None
|
|
if 'LIG' not in self.Flags:
|
|
self.Flags.append('LIG')
|
|
elif self.L in ['0', '1', '2', '3']:
|
|
self.L = int(self.L)
|
|
else:
|
|
raise InvalidEncodingException('Invalid encoding: illegal "l" value!')
|
|
elif t.startswith('w:'):
|
|
self.W = self.RawW = t[2:]
|
|
if self.W == 'x':
|
|
self.W = None
|
|
elif self.W == 'i':
|
|
self.W = None
|
|
if 'WIG' not in self.Flags:
|
|
self.Flags.append('WIG')
|
|
elif self.W in ['0', '1']:
|
|
self.W = int(self.W)
|
|
else:
|
|
raise InvalidEncodingException('Invalid encoding: illegal "w" value!')
|
|
elif re.match(r'0x[0-9a-fA-F]{2}', t):
|
|
self.Opcodes.append(int(t, 16))
|
|
elif t in ['intel', 'amd', 'via', 'cyrix']:
|
|
self.Vendor = t
|
|
elif t in ['mpx', 'cet', 'cldm']:
|
|
self.Feature = t
|
|
elif 'vsib' == t:
|
|
self.HasVsib = True
|
|
if 'VSIB' not in self.Flags:
|
|
self.Flags.append('VSIB')
|
|
elif 'mib' == t:
|
|
self.HasMib = True
|
|
if 'MIB' not in self.Flags:
|
|
self.Flags.append('MIB')
|
|
elif 'bitbase' == t:
|
|
self.HasBitbase = True
|
|
if 'BITBASE' not in self.Flags:
|
|
self.Flags.append('BITBASE')
|
|
elif 'sibmem' == t:
|
|
self.HasSibMem = True
|
|
if 'SIBMEM' not in self.Flags:
|
|
self.Flags.append('SIBMEM')
|
|
elif t in ['ib', 'iw', 'iz', 'iv', 'id', 'cb', 'cz', 'cv', 'cp', 'is4']:
|
|
# Not used for now, but they must be specified, for a complete instruction encoding specification.
|
|
pass
|
|
elif t.startswith('evex.'):
|
|
tokens2 = t.split('.')
|
|
self.Evex = True
|
|
self.M = self.P = self.L = self.W = 0
|
|
for t2 in tokens2[1:]:
|
|
# Handle the L specifier
|
|
if t2 == 'LIG':
|
|
self.L = None
|
|
if 'LIG' not in self.Flags:
|
|
self.Flags.append('LIG')
|
|
elif t2 == 'LANY':
|
|
self.L = None
|
|
elif t2 == '128' or t2 == 'LZ' or t2 == 'L0':
|
|
self.L = 0
|
|
elif t2 == '256' or t2 == 'L1':
|
|
self.L = 1
|
|
elif t2 == '512' or t2 == 'L2':
|
|
self.L = 2
|
|
# Handle the W specifier
|
|
elif t2 == 'WIG':
|
|
self.W = None
|
|
if 'WIG' not in self.Flags:
|
|
self.Flags.append('WIG')
|
|
elif t2 == 'WANY':
|
|
self.W = None
|
|
elif t2 == 'W0':
|
|
self.W = 0
|
|
elif t2 == 'W1':
|
|
self.W = 1
|
|
# Handle compressed prefix
|
|
elif t2 == '66':
|
|
self.P = 1
|
|
elif t2 == 'F3':
|
|
self.P = 2
|
|
elif t2 == 'F2':
|
|
self.P = 3
|
|
# Handle opcode map
|
|
elif t2 == '0F':
|
|
self.M = 1
|
|
elif t2 == '0F38':
|
|
self.M = 2
|
|
elif t2 == '0F3A':
|
|
self.M = 3
|
|
elif t2 in ['NDS', 'NDD', 'DDS']:
|
|
pass
|
|
else:
|
|
raise InvalidEncodingException('Unknwon new evex token: %s/%s' % (t, t2))
|
|
else:
|
|
raise InvalidEncodingException('Unknown token: %s' % t)
|
|
|
|
# Pre-process the explicit operands. The mask register is contained as a decorator, but put it as a direct
|
|
# operand as well. The access flag is already present in rwm.
|
|
if len(iinfo["expops"]) >= 1 and iinfo["expops"][0].find("{K") > 0:
|
|
iinfo["expops"].insert(1, 'aKq')
|
|
|
|
# Parse the explicit instruction operands.
|
|
self.ExpOps = self.process_operands(iinfo["expops"], False)
|
|
|
|
# Parse the implicit instruction operands.
|
|
self.ImpOps = self.process_operands(iinfo["impops"], True)
|
|
|
|
# Post-process the operands. We fill up the flags with additional info based on the operands.
|
|
for op in self.ExpOps:
|
|
for deco in op.Decorators:
|
|
self.DecoFlags.append({'{K}':'MASK', '{z}':'ZERO', '{sae}':'SAE', '{er}':'ER', '|B32':'BROADCAST', '|B64':'BROADCAST'}[deco])
|
|
if op.Type in ['U', 'V', 'W', 'H', 'L'] and 'VECT' not in self.Flags:
|
|
self.Flags.append('VECT')
|
|
|
|
# VEX, XOP, EVEX and MVEX instructions are not valid in real or v8086 modes.
|
|
if self.Vex or self.Xop or self.Evex or self.Mvex:
|
|
if 'real' in self.Modes:
|
|
self.Modes.remove('real')
|
|
if 'v8086' in self.Modes:
|
|
self.Modes.remove('v8086')
|
|
if 'long' not in self.Modes and 'II64' not in self.Flags:
|
|
self.Flags.append('II64')
|
|
if 'long' in self.Modes and 'prot' not in self.Modes and 'O64' not in self.Flags:
|
|
self.Flags.append('O64')
|
|
|
|
# Split the instruction into encoding entities.
|
|
e = self.split_encoding()
|
|
if self.Vex or self.Xop or self.Evex:
|
|
self.Spec = { "mmmmm" : e[0], "opcodes" : e[1], "modrm" : e[2], "pp" : e[3], "l" : e[4], "w" : e[5] }
|
|
else:
|
|
self.Spec = { "opcodes" : e[0], "modrm" : e[1], "mpre" : e[2], "mode" : e[3], "dsize" : e[4], \
|
|
"asize" : e[5], "opre" : e[6], "vendor" : e[7], "feature": e[8] }
|
|
|
|
def process_operands(self, ops, imp = False):
|
|
p = 1
|
|
res = []
|
|
for op in ops:
|
|
if op == "nil":
|
|
break
|
|
flags = []
|
|
if not imp:
|
|
for f in self.Flags:
|
|
if f.startswith('OP%d' % p):
|
|
flags.append('OP' + f[3:])
|
|
self.Flags.remove(f)
|
|
else:
|
|
flags.append('OPDEF')
|
|
if not imp:
|
|
res.append(Operand(op, self.Rwm[p - 1], flags, imp))
|
|
else:
|
|
res.append(Operand(op, self.Rwm[len(self.ExpOps) + p - 1], flags, imp))
|
|
p += 1
|
|
return res
|
|
|
|
def split_encoding(self):
|
|
if self.Vex or self.Xop or self.Evex or self.Mvex:
|
|
return self.split_encoding_vex()
|
|
else:
|
|
return self.split_encoding_legacy()
|
|
|
|
def split_encoding_vex(self):
|
|
# First, get the 'mmmmm' - VEX decoding table.
|
|
mmmmm = '%x' % self.M
|
|
# Now get the opcode. Should be only one.
|
|
opcodes = ['%02x' % x for x in self.Opcodes]
|
|
# Get the modrm redirections.
|
|
modrm = { "mod": self.Mod, "reg": my_str(self.Reg), "rm": my_str(self.Rm), "modpost": None }
|
|
# Get the pp, if any.
|
|
pp = my_str(self.P)
|
|
# Get the l, if any.
|
|
l = my_str(self.L)
|
|
# Get the w, if any.
|
|
w = my_str(self.W)
|
|
return (mmmmm, opcodes, modrm, pp, l, w)
|
|
|
|
def split_encoding_legacy(self):
|
|
# First redirection class, the opcode.
|
|
opcodes = ['%02x' % x for x in self.Opcodes]
|
|
# Second redirection class, modrm
|
|
modrm = { "mod": self.Mod, "reg": my_str(self.Reg), "rm": my_str(self.Rm), "modpost": None }
|
|
# Third redirection class, mandatory prefixes
|
|
mprefixes = []
|
|
if self.MustHaveF2:
|
|
mprefixes.append('F2')
|
|
if self.MustHaveF3:
|
|
mprefixes.append('F3')
|
|
if self.MustHave66:
|
|
mprefixes.append('66')
|
|
if self.Np:
|
|
mprefixes.append('NP')
|
|
if len(mprefixes) == 0 and (not (self.Xop or self.Vex or self.Evex or self.Mvex)) and\
|
|
(self.Opcodes[0] == 0x0F and self.Opcodes[1] in [0x3A, 0x38]):
|
|
mprefixes.append(None)
|
|
# Fourth redirection class, operating mode.
|
|
mode = []
|
|
if self.RedM16:
|
|
mode.append('m16')
|
|
elif self.RedM32:
|
|
mode.append('m32')
|
|
elif self.RedM64:
|
|
mode.append('m64')
|
|
# Fifth redirection class, default operand size.
|
|
dsize = []
|
|
if self.RedDs16:
|
|
dsize.append('ds16')
|
|
elif self.RedDs32:
|
|
dsize.append('ds32')
|
|
elif self.RedDs64:
|
|
dsize.append('ds64')
|
|
elif self.RedDDs64:
|
|
dsize.append('dds64')
|
|
elif self.RedFDs64:
|
|
dsize.append('fds64')
|
|
# Sixth redirection class, default address size.
|
|
asize = []
|
|
if self.RedAs16:
|
|
asize.append('as16')
|
|
elif self.RedAs32:
|
|
asize.append('as32')
|
|
elif self.RedAs64:
|
|
asize.append('as64')
|
|
# Seventh redirection class, REX prefix, REX.W, 64 bit mode, 0xF3, SIB. The important aspect here is that unlike
|
|
# the other classes, this is not exhaustive - if an instruction does not fit in any of the entries, it
|
|
# will default to index 0 (and it will not return invalid encoding, unless entry 0 is invalid).
|
|
oprefixes = []
|
|
if self.RedRexB:
|
|
oprefixes.append('rexb')
|
|
if self.RedRexW:
|
|
oprefixes.append('rexw')
|
|
if self.Red64:
|
|
oprefixes.append('64')
|
|
if self.RedF3:
|
|
oprefixes.append('aF3')
|
|
if self.RedRep:
|
|
oprefixes.append('rep')
|
|
# Vendor redirection, if any.
|
|
return (opcodes, modrm, mprefixes, mode, dsize, asize, oprefixes, self.Vendor, self.Feature)
|
|
|
|
|
|
def __str__(self):
|
|
# Get the operands
|
|
ops = ''
|
|
for o in self.ExpOps:
|
|
ops += o.__str__() + ','
|
|
ops = ops[:-1]
|
|
|
|
# Return a text reprezentation of the encoding
|
|
return (self.Mnemonic + ' ' + ops).strip()
|
|
|
|
|
|
|
|
def parse_entry(entry, template_flags = {}, template_cpuid = {}, template_modes = {}):
|
|
# make sure this is not a comment. Skip comments.
|
|
if entry.startswith('#') or len(entry) < 4: return None
|
|
|
|
try:
|
|
# Preprocess: remove comments, CR/LF
|
|
com = entry.find('#')
|
|
x = entry.replace('\x0D', '').replace('\x0A', '')
|
|
if -1 != com: x = entry[:com]
|
|
|
|
# Space can't be the first character.
|
|
if x[0] == ' ':
|
|
raise ParseLineException('Space cannot be the first character!')
|
|
|
|
# Extract the mnemonic
|
|
mnemonic = x[0:x.find(' ')].strip()
|
|
|
|
# Extract the explicit operands
|
|
x = x[x.find(' '):].strip()
|
|
expops = x[:x.find(' ')].split(',')
|
|
if len(expops) == 1 and expops[0] == 'nil': expops = []
|
|
|
|
# Extract the implicit operands
|
|
x = x[x.find(' '):].strip()
|
|
impops = x[:x.find(' ')].split(',')
|
|
if len(impops) == 1 and impops[0] == 'nil': impops = []
|
|
|
|
# Extract the encoding
|
|
x = x[x.find('[')+1:]
|
|
encoding = x[:x.find(']')].strip()
|
|
|
|
# Extract the flags, class, set, category, encoding, prefmap
|
|
attributes = prefmap = isaset = category = iclass = adop = rwm = None
|
|
cff = tuple = flgaccess = modes = exclass = fpuflg = None
|
|
|
|
x = x[x.find(']')+1:].strip()
|
|
|
|
while x:
|
|
start = x.find(':')
|
|
end = x.find(',')
|
|
if start == -1:
|
|
break
|
|
if end == -1:
|
|
end = len(x)
|
|
token = x[:start].strip()
|
|
value = x[start+1:end].strip()
|
|
|
|
# parse token
|
|
if token == 'a': # Instruction attributes.
|
|
attributes = value.split('|')
|
|
elif token == 'p': # Accepted prefixes.
|
|
prefmap = value.split('|')
|
|
elif token == 's': # Instruction set
|
|
isaset = value
|
|
elif token == 't': # Instruction type
|
|
category = value
|
|
elif token == 'c': # Instruction class. Defaults to the mnemonic if not specified.
|
|
iclass = value
|
|
elif token == 'w': # Read/write map
|
|
rwm = value.split('|')
|
|
elif token == 'i': # CPUID.
|
|
cff = value
|
|
elif token == 'l': # tuple
|
|
tuple = value
|
|
elif token == 'e':
|
|
exclass = value
|
|
elif token == 'f': # Flags access
|
|
flgaccess = []
|
|
for v in value.split('|'):
|
|
if v in template_flags:
|
|
flgaccess += template_flags[v].split('|')
|
|
else:
|
|
flgaccess.append(v)
|
|
elif token == 'u':
|
|
fpuflg = ['u', 'u', 'u', 'u'] # each one is undefined.
|
|
for v in value.split('|'):
|
|
flg, acc = v.split('=')
|
|
if flg not in ['C0', 'C1', 'C2', 'C3']:
|
|
raise ParseLineException('Unknown FPU flag: %s' % flg)
|
|
if acc not in ['0', '1', 'm', 'u']:
|
|
raise ParseLineException('Unknown FPU flag access: %s' % acc)
|
|
fpuflg[int(flg[1])] = acc
|
|
elif token == 'm': # CPU modes.
|
|
# Example: m:ring=0,1,2,3|vmx=root,nonroot|mode=real,v8086,smm,prot,compat,long|other=sgx,tsx
|
|
# Note: any group that is not specified is considered entirely valid
|
|
# Note: any group that is specified overrides all the other fields in the group; example:
|
|
# mode=real - this means the instruction is valid ONLY in real mode.
|
|
# mode=!v8086 - this means the instructiom is valid is ANY mode except for V8086
|
|
tmodes = []
|
|
for t in value.split('|'):
|
|
if t in template_modes:
|
|
tmodes += template_modes[t].split('|')
|
|
else:
|
|
tmodes.append(t)
|
|
|
|
modes = []
|
|
groups = {}
|
|
for g in valid_mode_groups:
|
|
groups[g] = {}
|
|
groups[g]["negated"] = False
|
|
groups[g]["specified"] = False
|
|
groups[g]["modes"] = []
|
|
|
|
for tm in tmodes:
|
|
m, v = tm.split('=')
|
|
for vx in v.split('+'):
|
|
negated = False
|
|
if vx.startswith('!'):
|
|
vx = vx[1:]
|
|
groups[m]["negated"] = True
|
|
if m not in valid_mode_groups:
|
|
raise ParseLineException('Unknown CPU mode group specified: %s' % m)
|
|
if vx not in valid_mode_map[m]:
|
|
raise ParseLineException('Mode %s is not valid for mode group %s; it can be one of [%s]' %
|
|
(vx, m, ','.join(valid_mode_map[m])))
|
|
groups[m]["specified"] = True
|
|
groups[m]["modes"].append(vx)
|
|
|
|
for g in groups:
|
|
if not groups[g]["specified"]:
|
|
modes += valid_mode_map[g]
|
|
elif not groups[g]["negated"]:
|
|
modes += groups[g]["modes"]
|
|
else:
|
|
modes += [x for x in valid_mode_map[g] if x not in groups[g]["modes"]]
|
|
else:
|
|
raise ParseLineException('Unknown token specified: %s' % token)
|
|
|
|
# Advance
|
|
if -1 == x.find(','):
|
|
x = ''
|
|
else:
|
|
x = x[x.find(',')+1:].strip()
|
|
|
|
if attributes is None:
|
|
attributes = []
|
|
if prefmap is None:
|
|
prefmap = []
|
|
if isaset is None:
|
|
isaset = 'UNKNOWN'
|
|
if category is None:
|
|
category = 'UNKNOWN'
|
|
if iclass is None:
|
|
iclass = mnemonic
|
|
if rwm is None:
|
|
rwm = []
|
|
if cff is None:
|
|
cff = None
|
|
if modes is None:
|
|
# No mode specified, assume validity in all modes.
|
|
modes = []
|
|
modes += valid_cpu_modes
|
|
if flgaccess is None:
|
|
flgaccess = []
|
|
if fpuflg is None:
|
|
# fpuflg[x] is for Cx (fpuflg[0] = C0, fpuflg[1] = C1, etc.)
|
|
# u = undefined, m = modified, 0 = cleared to 0, 1 = set to 1.
|
|
fpuflg = ['u', 'u', 'u', 'u']
|
|
|
|
# Validate the tokens.
|
|
# The set can be anything.
|
|
# The type can be anything.
|
|
# The iclass can be missing, it will default to the mnemonic.
|
|
|
|
# The read/write map must have the same size as the number of operands.
|
|
if len(rwm) < len(expops) + len(impops):
|
|
raise ParseLineException('Invalid number of operand access specifiers: provided %d, expecting at least %d' %
|
|
(len(rwm), len(expops) + len(impops)))
|
|
for r in rwm:
|
|
if r not in valid_access:
|
|
raise ParseLineException('Unknown access specifier "%s", expecting one of [%s]' %
|
|
(r, ','.join(valid_access)))
|
|
# The CPUID can be anything, even if it doesn't match something specified in cpuid.dat.
|
|
|
|
# The modes must be one of the valid modes.
|
|
for m in modes:
|
|
if m.startswith('!'):
|
|
m = m[1:]
|
|
if m not in valid_cpu_modes:
|
|
raise ParseLineException('Unknown CPU mode specifier "%s", expecting one of [%s]' %
|
|
(m, ','.join(valid_cpu_modes)))
|
|
|
|
# Validate the prefixes.
|
|
for p in prefmap:
|
|
if p not in valid_prefixes:
|
|
raise ParseLineException('Unknown prefix specifier "%s", expecting one of [%s]' %
|
|
(p, ','.join(valid_prefixes)))
|
|
|
|
# Validate the tuples.
|
|
if tuple and tuple not in valid_tuples:
|
|
raise ParseLineException('Unknown tuple specifier "%s", expecting one of [%s]' %
|
|
(tuple, ','.join(valid_tuples)))
|
|
|
|
# Validate the attributes.
|
|
for a in attributes:
|
|
if a not in valid_attributes:
|
|
raise ParseLineException('Unknown attribute specifier "%s", expecting one of [%s]' %
|
|
(a, ','.join(valid_attributes)))
|
|
|
|
# Validate the flags.
|
|
revflg = {}
|
|
for m in valid_flag_op:
|
|
revflg[m] = []
|
|
for flg in flgaccess:
|
|
f, m = flg.split('=')
|
|
if m not in valid_flag_op:
|
|
raise ParseLineException('Unknow flag access specifier "%s", expecting one of [%s]' %
|
|
(m, ','.join(valid_flag_op)))
|
|
if f not in valid_flags:
|
|
raise ParseLineException('Unknow flag specifier "%s", expecting one of [%s]' %
|
|
(f, ','.join(valid_flas)))
|
|
revflg[m].append(f)
|
|
flgaccess = revflg
|
|
|
|
iinfo = {
|
|
"mnemonic" : mnemonic, # Mnemonic
|
|
"expops" : expops, # Explicit operands
|
|
"impops" : impops, # Implicit operands
|
|
"encoding" : encoding, # Encoding
|
|
"flags" : attributes, # Instruction attributes
|
|
"prefixes" : prefmap, # Accepted prefixes
|
|
"set" : isaset, # Instruction set
|
|
"cat" : category, # Instruction category
|
|
"class" : iclass, # Instruction class
|
|
"rwm" : rwm, # Read/write operands map
|
|
"cff" : cff, # CPUID feature flag
|
|
"tuple" : tuple, # Tuple type, for EVEX instruxtions
|
|
"exclass" : exclass, # Exception class, for SSE/VEX/EVEX instructions
|
|
"flgaccess" : flgaccess, # RFLAGS access
|
|
"modes" : modes, # Valid operating modes
|
|
"fpuflg" : fpuflg, # FPU flags access (C0, C1, C2, C3), valid for x87 instructions only
|
|
}
|
|
|
|
if 'PREFIX' in attributes:
|
|
return None
|
|
|
|
try:
|
|
ins = Instruction(iinfo)
|
|
except:
|
|
raise
|
|
|
|
except Exception as e:
|
|
raise
|
|
|
|
return ins
|
|
|
|
|
|
|
|
def parse_ins_file(fpath, template_flags = {}, template_cpuid = {}, template_modes = {}):
|
|
instructions = []
|
|
lcount = 0
|
|
for line in open(fpath, 'rt'):
|
|
lcount += 1
|
|
try:
|
|
ins = parse_entry(line, template_flags, template_cpuid, template_modes)
|
|
if ins: instructions.append(ins)
|
|
except Exception as e:
|
|
print('ERROR: Parsing failed at %s:%d: %s' % (fpath, lcount, e))
|
|
raise
|
|
return instructions
|
|
|
|
|
|
|
|
def parse_pre_file(fpath):
|
|
prefixes = []
|
|
for line in open(fpath, 'rt'):
|
|
# Ignore comments.
|
|
if line.startswith('#'):
|
|
continue
|
|
res = re.findall(r'([^\s]+)\s*\[\s*(0x[0-9a-fA-F]+)\]', line)
|
|
if not res:
|
|
continue
|
|
res = res[0]
|
|
pref = {}
|
|
pref["mnemonic"] = res[0]
|
|
pref["encoding"] = res[1]
|
|
prefixes.append(Prefix(pref))
|
|
return prefixes
|
|
|
|
|
|
|
|
def parse_cff_file(fpath):
|
|
features = []
|
|
for line in open(fpath, 'rt'):
|
|
if line.startswith('#'):
|
|
continue
|
|
res = re.findall(r'([^\s]+)\s+:\s+(0x[0-9a-fA-F]+),\s+(0x[0-9a-fA-F]+),\s+(EAX|ECX|EDX|EBX),\s+(\d+)', line)
|
|
if not res:
|
|
continue
|
|
res = res[0]
|
|
cffi = {}
|
|
cffi["name"] = res[0]
|
|
cffi["leaf"] = res[1]
|
|
cffi["subleaf"] = res[2]
|
|
cffi["reg"] = res[3]
|
|
cffi["bit"] = res[4]
|
|
features.append(CpuidFeatureFlag(cffi))
|
|
return features
|
|
|
|
|
|
def parse_flags_file(fpath):
|
|
flags = {}
|
|
for line in open(fpath, 'rt'):
|
|
if line.startswith('#'):
|
|
continue
|
|
res = re.findall(r'([^\s]+)\s+:([^$]+)', line)
|
|
if not res:
|
|
continue
|
|
res = res[0]
|
|
flags[res[0]] = res[1].strip('\n\r ')
|
|
return flags
|
|
|
|
|
|
def parse_modess_file(fpath):
|
|
modes = {}
|
|
for line in open(fpath, 'rt'):
|
|
if line.startswith('#'):
|
|
continue
|
|
res = re.findall(r'([^\s]+)\s+:([^$]+)', line)
|
|
if not res:
|
|
continue
|
|
res = res[0]
|
|
modes[res[0]] = res[1].strip('\n\r ')
|
|
return modes
|
|
|
|
|
|
#
|
|
# =============================================================================
|
|
# Main
|
|
# =============================================================================
|
|
#
|
|
if __name__ == "__main__":
|
|
if len(sys.argv) < 2:
|
|
print('Usage: %s defs-file' % os.path.basename(sys.argv[0]))
|
|
sys.exit(-1)
|
|
|
|
# Parse the flags file.
|
|
flags = parse_flags_file('%s/flags.dat' % sys.argv[1])
|
|
|
|
# Parse the prefixes
|
|
prefixes = parse_pre_file('%s/prefixes.dat' % sys.argv[1])
|
|
|
|
# Parse the cpuid feature flags and extract each feature
|
|
features = parse_cff_file('%s/cpuid.dat' % sys.argv[1])
|
|
|
|
# Parse the modes file.
|
|
modes = parse_modess_file('%s/modes.dat' % sys.argv[1])
|
|
|
|
# Parse the instruction file and extract the instructions
|
|
instructions = []
|
|
for fn in glob.glob('%s/table*.dat' % sys.argv[1]):
|
|
instructions += parse_ins_file(fn, flags, features)
|
|
|
|
# Sort the instructions.
|
|
instructions = sorted(instructions, key = lambda x: x.Mnemonic)
|
|
for i in range(0, len(instructions)):
|
|
print(instructions[i])
|
|
|
|
for i in range(0, len(prefixes)):
|
|
print(prefixes[i])
|
|
|
|
features = sorted(features, key = lambda x: x.Name)
|
|
for i in range(0, len(features)):
|
|
print(features[i])
|