.PHONY: vendor JOBS = 4 MAKE = make -j $(JOBS) SCONS = scons -Q -j $(JOBS) BOARDLOADER_BUILD_DIR = build/boardloader BOOTLOADER_BUILD_DIR = build/bootloader FIRMWARE_BUILD_DIR = build/firmware UNAME_S := $(shell uname -s) ifeq ($(UNAME_S),Darwin) UNIX_PORT_OPTS ?= TREZOR_X86=0 else UNIX_PORT_OPTS ?= TREZOR_X86=1 endif CROSS_PORT_OPTS ?= MICROPY_FORCE_32BIT=1 ifeq ($(DISPLAY_ILI9341V), 1) CFLAGS += -DDISPLAY_ILI9341V=1 CFLAGS += -DDISPLAY_ST7789V=0 endif ifeq ($(DISPLAY_VSYNC), 0) CFLAGS += -DDISPLAY_VSYNC=0 endif ifeq ($(STLINKv21), 1) OPENOCD = openocd -f interface/stlink-v2-1.cfg -c "transport select hla_swd" -f target/stm32f4x.cfg else OPENOCD = openocd -f interface/stlink-v2.cfg -f target/stm32f4x.cfg endif ## help commands: help: ## show this help @awk 'BEGIN {FS = ":.*?## "} /^[a-zA-Z0-9_-]+:.*?## / {printf "\033[36m make %-20s\033[0m %s\n", $$1, $$2} /^##(.*)/ {printf "\033[33m%s\n", substr($$0, 4)}' $(MAKEFILE_LIST) ## dependencies commands: vendor: ## update git submodules git submodule update --init res: ## update resources ./tools/res_collect ## emulator commands: run: ## run unix port cd src ; ../build/unix/micropython emu: ## run emulator ./emu.sh ## test commands: test: ## run unit tests cd tests ; ./run_tests.sh testpy: ## run selected unit tests from python-trezor cd tests ; ./run_tests_device.sh pylint: ## run pylint on application sources pylint -E $(shell find src -name *.py) style: ## run code style check on application sources flake8 $(shell find src -name *.py) ## build commands: build: build_boardloader build_bootloader build_firmware build_unix build_cross ## build all build_boardloader: ## build boardloader $(SCONS) CFLAGS="$(CFLAGS)" build/boardloader/boardloader.bin build_bootloader: ## build bootloader $(SCONS) CFLAGS="$(CFLAGS)" build/bootloader/bootloader.bin build_firmware: res build_cross ## build firmware with frozen modules $(SCONS) CFLAGS="$(CFLAGS)" build/firmware/firmware.bin $(SCONS) CFLAGS="$(CFLAGS)" build/firmware/firmware0.bin build_unix: ## build unix port $(SCONS) build/unix/micropython $(UNIX_PORT_OPTS) build_unix_noui: ## build unix port without UI support $(SCONS) build/unix/micropython $(UNIX_PORT_OPTS) TREZOR_NOUI=1 build_cross: ## build mpy-cross port $(MAKE) -C vendor/micropython/mpy-cross $(CROSS_PORT_OPTS) ## clean commands: clean: clean_boardloader clean_bootloader clean_firmware clean_unix clean_cross ## clean all clean_boardloader: ## clean boardloader build rm -rf build/boardloader clean_bootloader: ## clean bootloader build rm -rf build/bootloader clean_firmware: ## clean firmware build rm -rf build/firmware clean_unix: ## clean unix build rm -rf build/unix clean_cross: ## clean mpy-cross build $(MAKE) -C vendor/micropython/mpy-cross clean $(CROSS_PORT_OPTS) ## flash commands: flash: flash_boardloader flash_bootloader flash_firmware ## flash everything using OpenOCD flash_boardloader: $(BOARDLOADER_BUILD_DIR)/boardloader.bin ## flash boardloader using OpenOCD $(OPENOCD) -c "init; reset halt; flash write_image erase $< 0x08000000; exit" flash_bootloader: $(BOOTLOADER_BUILD_DIR)/bootloader.bin ## flash bootloader using OpenOCD $(OPENOCD) -c "init; reset halt; flash write_image erase $< 0x08010000; exit" flash_firmware: $(FIRMWARE_BUILD_DIR)/firmware.bin ## flash firmware using OpenOCD $(OPENOCD) -c "init; reset halt; flash write_image erase $< 0x08020000; exit" flash_firmware0: $(FIRMWARE_BUILD_DIR)/firmware0.bin ## flash firmware0 using OpenOCD $(OPENOCD) -c "init; reset halt; flash write_image erase $< 0x08000000; exit" flash_combine: $(FIRMWARE_BUILD_DIR)/combined.bin ## flash combined using OpenOCD $(OPENOCD) -c "init; reset halt; flash write_image erase $< 0x08000000; exit" flash_erase: ## erase all sectors in flash bank 0 $(OPENOCD) -c "init; reset halt; flash info 0; flash erase_sector 0 0 last; flash erase_check 0; exit" ## openocd debug commands: openocd: ## start openocd which connects to the device $(OPENOCD) GDB = arm-none-eabi-gdb --nx -ex 'set remotetimeout unlimited' -ex 'set confirm off' -ex 'target remote 127.0.0.1:3333' -ex 'monitor reset halt' gdb_boardloader: $(BOARDLOADER_BUILD_DIR)/boardloader.elf ## start remote gdb session to openocd with boardloader symbols $(GDB) $< gdb_bootloader: $(BOOTLOADER_BUILD_DIR)/bootloader.elf ## start remote gdb session to openocd with bootloader symbols $(GDB) $< gdb_firmware: $(FIRMWARE_BUILD_DIR)/firmware.elf ## start remote gdb session to openocd with firmware symbols $(GDB) $< ## misc commands: vendorheader: ## construct default vendor header ./tools/build_vendorheader 'e28a8970753332bd72fef413e6b0b2ef1b4aadda7aa2c141f233712a6876b351:d4eec1869fb1b8a4e817516ad5a931557cb56805c3eb16e8f3a803d647df7869:772c8a442b7db06e166cfbc1ccbcbcde6f3eba76a4e98ef3ffc519502237d6ef' 2 0.0 DEVELOPMENT assets/vendor_devel.toif embed/firmware/vendorheader.bin ./tools/binctl embed/firmware/vendorheader.bin -s 1:2 4444444444444444444444444444444444444444444444444444444444444444:4545454545454545454545454545454545454545454545454545454545454545 binctl: ## print info about binary files ./tools/binctl $(BOOTLOADER_BUILD_DIR)/bootloader.bin ./tools/binctl embed/firmware/vendorheader.bin ./tools/binctl $(FIRMWARE_BUILD_DIR)/firmware.bin bloaty: ## run bloaty size profiler bloaty -d symbols -n 0 -s file $(FIRMWARE_BUILD_DIR)/firmware.elf | less bloaty -d compileunits -n 0 -s file $(FIRMWARE_BUILD_DIR)/firmware.elf | less sizecheck: ## check sizes of binary files test 32768 -ge $(shell stat -c%s $(BOARDLOADER_BUILD_DIR)/boardloader.bin) test 65536 -ge $(shell stat -c%s $(BOOTLOADER_BUILD_DIR)/bootloader.bin) test 917504 -ge $(shell stat -c%s $(FIRMWARE_BUILD_DIR)/firmware.bin) test 1048576 -ge $(shell stat -c%s $(FIRMWARE_BUILD_DIR)/firmware0.bin) combine: ## combine boardloader + bootloader + firmware into one combined image ./tools/combine_firmware \ 0x08000000 $(BOARDLOADER_BUILD_DIR)/boardloader.bin \ 0x08010000 $(BOOTLOADER_BUILD_DIR)/bootloader.bin \ 0x08020000 $(FIRMWARE_BUILD_DIR)/firmware.bin \ > $(FIRMWARE_BUILD_DIR)/combined.bin \