diff --git a/core/embed/segger/Config/Global.h b/core/embed/segger/Config/Global.h index b5a30b067a..e2ef4264b7 100644 --- a/core/embed/segger/Config/Global.h +++ b/core/embed/segger/Config/Global.h @@ -1,113 +1,113 @@ -/********************************************************************* -* SEGGER Microcontroller GmbH * -* The Embedded Experts * -********************************************************************** -* * -* (c) 1995 - 2019 SEGGER Microcontroller GmbH * -* * -* www.segger.com Support: support@segger.com * -* * -********************************************************************** -* * -* SEGGER SystemView * Real-time application analysis * -* * -********************************************************************** -* * -* All rights reserved. * -* * -* SEGGER strongly recommends to not make any changes * -* to or modify the source code of this software in order to stay * -* compatible with the SystemView and RTT protocol, and J-Link. * -* * -* Redistribution and use in source and binary forms, with or * -* without modification, are permitted provided that the following * -* condition is met: * -* * -* o Redistributions of source code must retain the above copyright * -* notice, this condition and the following disclaimer. * -* * -* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND * -* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * -* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * -* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * -* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR * -* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * -* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * -* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * -* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * -* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * -* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE * -* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH * -* DAMAGE. * -* * -********************************************************************** -* * -* SystemView version: 3.20 * -* * -********************************************************************** ----------------------------------------------------------------------- -File : Global.h -Purpose : Global types - In case your application already has a Global.h, you should - merge the files. In order to use Segger code, the types - U8, U16, U32, I8, I16, I32 need to be defined in Global.h; - additional definitions do not hurt. -Revision: $Rev: 12501 $ ----------------------------END-OF-HEADER------------------------------ -*/ - -#ifndef GLOBAL_H // Guard against multiple inclusion -#define GLOBAL_H - -#define U8 unsigned char -#define I8 signed char -#define U16 unsigned short -#define I16 signed short -#ifdef __x86_64__ -#define U32 unsigned -#define I32 int -#else -#define U32 unsigned long -#define I32 signed long -#endif - -// -// CC_NO_LONG_SUPPORT can be defined to compile test -// without long support for compilers that do not -// support C99 and its long type. -// -#ifdef CC_NO_LONG_SUPPORT - #define PTR_ADDR U32 -#else // Supports long type. -#if defined(_WIN32) && !defined(__clang__) && !defined(__MINGW32__) - // - // Microsoft VC6 compiler related - // - #define U64 unsigned __int64 - #define U128 unsigned __int128 - #define I64 __int64 - #define I128 __int128 - #if _MSC_VER <= 1200 - #define U64_C(x) x##UI64 - #else - #define U64_C(x) x##ULL - #endif -#else - // - // C99 compliant compiler - // - #define U64 unsigned long long - #define I64 signed long long - #define U64_C(x) x##ULL -#endif - -#if (defined(_WIN64) || defined(__LP64__)) // 64-bit symbols used by Visual Studio and GCC, maybe others as well. - #define PTR_ADDR U64 -#else - #define PTR_ADDR U32 -#endif -#endif // Supports long type. - -#endif // Avoid multiple inclusion - -/*************************** End of file ****************************/ +/********************************************************************* +* SEGGER Microcontroller GmbH * +* The Embedded Experts * +********************************************************************** +* * +* (c) 1995 - 2019 SEGGER Microcontroller GmbH * +* * +* www.segger.com Support: support@segger.com * +* * +********************************************************************** +* * +* SEGGER SystemView * Real-time application analysis * +* * +********************************************************************** +* * +* All rights reserved. * +* * +* SEGGER strongly recommends to not make any changes * +* to or modify the source code of this software in order to stay * +* compatible with the SystemView and RTT protocol, and J-Link. * +* * +* Redistribution and use in source and binary forms, with or * +* without modification, are permitted provided that the following * +* condition is met: * +* * +* o Redistributions of source code must retain the above copyright * +* notice, this condition and the following disclaimer. * +* * +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND * +* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * +* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * +* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * +* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR * +* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * +* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * +* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * +* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * +* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE * +* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH * +* DAMAGE. * +* * +********************************************************************** +* * +* SystemView version: 3.20 * +* * +********************************************************************** +---------------------------------------------------------------------- +File : Global.h +Purpose : Global types + In case your application already has a Global.h, you should + merge the files. In order to use Segger code, the types + U8, U16, U32, I8, I16, I32 need to be defined in Global.h; + additional definitions do not hurt. +Revision: $Rev: 12501 $ +---------------------------END-OF-HEADER------------------------------ +*/ + +#ifndef GLOBAL_H // Guard against multiple inclusion +#define GLOBAL_H + +#define U8 unsigned char +#define I8 signed char +#define U16 unsigned short +#define I16 signed short +#ifdef __x86_64__ +#define U32 unsigned +#define I32 int +#else +#define U32 unsigned long +#define I32 signed long +#endif + +// +// CC_NO_LONG_SUPPORT can be defined to compile test +// without long support for compilers that do not +// support C99 and its long type. +// +#ifdef CC_NO_LONG_SUPPORT + #define PTR_ADDR U32 +#else // Supports long type. +#if defined(_WIN32) && !defined(__clang__) && !defined(__MINGW32__) + // + // Microsoft VC6 compiler related + // + #define U64 unsigned __int64 + #define U128 unsigned __int128 + #define I64 __int64 + #define I128 __int128 + #if _MSC_VER <= 1200 + #define U64_C(x) x##UI64 + #else + #define U64_C(x) x##ULL + #endif +#else + // + // C99 compliant compiler + // + #define U64 unsigned long long + #define I64 signed long long + #define U64_C(x) x##ULL +#endif + +#if (defined(_WIN64) || defined(__LP64__)) // 64-bit symbols used by Visual Studio and GCC, maybe others as well. + #define PTR_ADDR U64 +#else + #define PTR_ADDR U32 +#endif +#endif // Supports long type. + +#endif // Avoid multiple inclusion + +/*************************** End of file ****************************/ diff --git a/core/embed/segger/Config/SEGGER_RTT_Conf.h b/core/embed/segger/Config/SEGGER_RTT_Conf.h index ed24bf7f9b..4087f67003 100644 --- a/core/embed/segger/Config/SEGGER_RTT_Conf.h +++ b/core/embed/segger/Config/SEGGER_RTT_Conf.h @@ -1,428 +1,428 @@ -/********************************************************************* -* SEGGER Microcontroller GmbH * -* The Embedded Experts * -********************************************************************** -* * -* (c) 1995 - 2019 SEGGER Microcontroller GmbH * -* * -* www.segger.com Support: support@segger.com * -* * -********************************************************************** -* * -* SEGGER SystemView * Real-time application analysis * -* * -********************************************************************** -* * -* All rights reserved. * -* * -* SEGGER strongly recommends to not make any changes * -* to or modify the source code of this software in order to stay * -* compatible with the SystemView and RTT protocol, and J-Link. * -* * -* Redistribution and use in source and binary forms, with or * -* without modification, are permitted provided that the following * -* condition is met: * -* * -* o Redistributions of source code must retain the above copyright * -* notice, this condition and the following disclaimer. * -* * -* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND * -* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * -* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * -* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * -* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR * -* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * -* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * -* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * -* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * -* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * -* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE * -* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH * -* DAMAGE. * -* * -********************************************************************** -* * -* SystemView version: 3.20 * -* * -********************************************************************** ----------------------------END-OF-HEADER------------------------------ -File : SEGGER_RTT_Conf.h -Purpose : Implementation of SEGGER real-time transfer (RTT) which - allows real-time communication on targets which support - debugger memory accesses while the CPU is running. -Revision: $Rev: 21386 $ - -*/ - -#ifndef SEGGER_RTT_CONF_H -#define SEGGER_RTT_CONF_H - -#ifdef __IAR_SYSTEMS_ICC__ - #include -#endif - -/********************************************************************* -* -* Defines, configurable -* -********************************************************************** -*/ - -// -// Take in and set to correct values for Cortex-A systems with CPU cache -// -//#define SEGGER_RTT_CPU_CACHE_LINE_SIZE (32) // Largest cache line size (in bytes) in the current system -//#define SEGGER_RTT_UNCACHED_OFF (0xFB000000) // Address alias where RTT CB and buffers can be accessed uncached -// -// Most common case: -// Up-channel 0: RTT -// Up-channel 1: SystemView -// -#ifndef SEGGER_RTT_MAX_NUM_UP_BUFFERS - #define SEGGER_RTT_MAX_NUM_UP_BUFFERS (3) // Max. number of up-buffers (T->H) available on this target (Default: 3) -#endif -// -// Most common case: -// Down-channel 0: RTT -// Down-channel 1: SystemView -// -#ifndef SEGGER_RTT_MAX_NUM_DOWN_BUFFERS - #define SEGGER_RTT_MAX_NUM_DOWN_BUFFERS (3) // Max. number of down-buffers (H->T) available on this target (Default: 3) -#endif - -#ifndef BUFFER_SIZE_UP - #define BUFFER_SIZE_UP (1024) // Size of the buffer for terminal output of target, up to host (Default: 1k) -#endif - -#ifndef BUFFER_SIZE_DOWN - #define BUFFER_SIZE_DOWN (16) // Size of the buffer for terminal input to target from host (Usually keyboard input) (Default: 16) -#endif - -#ifndef SEGGER_RTT_PRINTF_BUFFER_SIZE - #define SEGGER_RTT_PRINTF_BUFFER_SIZE (64u) // Size of buffer for RTT printf to bulk-send chars via RTT (Default: 64) -#endif - -#ifndef SEGGER_RTT_MODE_DEFAULT - #define SEGGER_RTT_MODE_DEFAULT SEGGER_RTT_MODE_NO_BLOCK_SKIP // Mode for pre-initialized terminal channel (buffer 0) -#endif - -/********************************************************************* -* -* RTT memcpy configuration -* -* memcpy() is good for large amounts of data, -* but the overhead is big for small amounts, which are usually stored via RTT. -* With SEGGER_RTT_MEMCPY_USE_BYTELOOP a simple byte loop can be used instead. -* -* SEGGER_RTT_MEMCPY() can be used to replace standard memcpy() in RTT functions. -* This is may be required with memory access restrictions, -* such as on Cortex-A devices with MMU. -*/ -#ifndef SEGGER_RTT_MEMCPY_USE_BYTELOOP - #define SEGGER_RTT_MEMCPY_USE_BYTELOOP 0 // 0: Use memcpy/SEGGER_RTT_MEMCPY, 1: Use a simple byte-loop -#endif -// -// Example definition of SEGGER_RTT_MEMCPY to external memcpy with GCC toolchains and Cortex-A targets -// -//#if ((defined __SES_ARM) || (defined __CROSSWORKS_ARM) || (defined __GNUC__)) && (defined (__ARM_ARCH_7A__)) -// #define SEGGER_RTT_MEMCPY(pDest, pSrc, NumBytes) SEGGER_memcpy((pDest), (pSrc), (NumBytes)) -//#endif - -// -// Target is not allowed to perform other RTT operations while string still has not been stored completely. -// Otherwise we would probably end up with a mixed string in the buffer. -// If using RTT from within interrupts, multiple tasks or multi processors, define the SEGGER_RTT_LOCK() and SEGGER_RTT_UNLOCK() function here. -// -// SEGGER_RTT_MAX_INTERRUPT_PRIORITY can be used in the sample lock routines on Cortex-M3/4. -// Make sure to mask all interrupts which can send RTT data, i.e. generate SystemView events, or cause task switches. -// When high-priority interrupts must not be masked while sending RTT data, SEGGER_RTT_MAX_INTERRUPT_PRIORITY needs to be adjusted accordingly. -// (Higher priority = lower priority number) -// Default value for embOS: 128u -// Default configuration in FreeRTOS: configMAX_SYSCALL_INTERRUPT_PRIORITY: ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) ) -// In case of doubt mask all interrupts: 1 << (8 - BASEPRI_PRIO_BITS) i.e. 1 << 5 when 3 bits are implemented in NVIC -// or define SEGGER_RTT_LOCK() to completely disable interrupts. -// -#ifndef SEGGER_RTT_MAX_INTERRUPT_PRIORITY - #define SEGGER_RTT_MAX_INTERRUPT_PRIORITY (0x20) // Interrupt priority to lock on SEGGER_RTT_LOCK on Cortex-M3/4 (Default: 0x20) -#endif - -/********************************************************************* -* -* RTT lock configuration for SEGGER Embedded Studio, -* Rowley CrossStudio and GCC -*/ -#if ((defined(__SES_ARM) || defined(__SES_RISCV) || defined(__CROSSWORKS_ARM) || defined(__GNUC__) || defined(__clang__)) && !defined (__CC_ARM) && !defined(WIN32)) - #if (defined(__ARM_ARCH_6M__) || defined(__ARM_ARCH_8M_BASE__)) - #define SEGGER_RTT_LOCK() { \ - unsigned int _SEGGER_RTT__LockState; \ - __asm volatile ("mrs %0, primask \n\t" \ - "movs r1, #1 \n\t" \ - "msr primask, r1 \n\t" \ - : "=r" (_SEGGER_RTT__LockState) \ - : \ - : "r1", "cc" \ - ); - - #define SEGGER_RTT_UNLOCK() __asm volatile ("msr primask, %0 \n\t" \ - : \ - : "r" (_SEGGER_RTT__LockState) \ - : \ - ); \ - } - #elif (defined(__ARM_ARCH_7M__) || defined(__ARM_ARCH_7EM__) || defined(__ARM_ARCH_8M_MAIN__)) - #ifndef SEGGER_RTT_MAX_INTERRUPT_PRIORITY - #define SEGGER_RTT_MAX_INTERRUPT_PRIORITY (0x20) - #endif - #define SEGGER_RTT_LOCK() { \ - unsigned int _SEGGER_RTT__LockState; \ - __asm volatile ("mrs %0, basepri \n\t" \ - "mov r1, %1 \n\t" \ - "msr basepri, r1 \n\t" \ - : "=r" (_SEGGER_RTT__LockState) \ - : "i"(SEGGER_RTT_MAX_INTERRUPT_PRIORITY) \ - : "r1", "cc" \ - ); - - #define SEGGER_RTT_UNLOCK() __asm volatile ("msr basepri, %0 \n\t" \ - : \ - : "r" (_SEGGER_RTT__LockState) \ - : \ - ); \ - } - - #elif defined(__ARM_ARCH_7A__) - #define SEGGER_RTT_LOCK() { \ - unsigned int _SEGGER_RTT__LockState; \ - __asm volatile ("mrs r1, CPSR \n\t" \ - "mov %0, r1 \n\t" \ - "orr r1, r1, #0xC0 \n\t" \ - "msr CPSR_c, r1 \n\t" \ - : "=r" (_SEGGER_RTT__LockState) \ - : \ - : "r1", "cc" \ - ); - - #define SEGGER_RTT_UNLOCK() __asm volatile ("mov r0, %0 \n\t" \ - "mrs r1, CPSR \n\t" \ - "bic r1, r1, #0xC0 \n\t" \ - "and r0, r0, #0xC0 \n\t" \ - "orr r1, r1, r0 \n\t" \ - "msr CPSR_c, r1 \n\t" \ - : \ - : "r" (_SEGGER_RTT__LockState) \ - : "r0", "r1", "cc" \ - ); \ - } - #elif defined(__riscv) || defined(__riscv_xlen) - #define SEGGER_RTT_LOCK() { \ - unsigned int _SEGGER_RTT__LockState; \ - __asm volatile ("csrr %0, mstatus \n\t" \ - "csrci mstatus, 8 \n\t" \ - "andi %0, %0, 8 \n\t" \ - : "=r" (_SEGGER_RTT__LockState) \ - : \ - : \ - ); - - #define SEGGER_RTT_UNLOCK() __asm volatile ("csrr a1, mstatus \n\t" \ - "or %0, %0, a1 \n\t" \ - "csrs mstatus, %0 \n\t" \ - : \ - : "r" (_SEGGER_RTT__LockState) \ - : "a1" \ - ); \ - } - #else - #define SEGGER_RTT_LOCK() - #define SEGGER_RTT_UNLOCK() - #endif -#endif - -/********************************************************************* -* -* RTT lock configuration for IAR EWARM -*/ -#ifdef __ICCARM__ - #if (defined (__ARM6M__) && (__CORE__ == __ARM6M__)) || \ - (defined (__ARM8M_BASELINE__) && (__CORE__ == __ARM8M_BASELINE__)) - #define SEGGER_RTT_LOCK() { \ - unsigned int _SEGGER_RTT__LockState; \ - _SEGGER_RTT__LockState = __get_PRIMASK(); \ - __set_PRIMASK(1); - - #define SEGGER_RTT_UNLOCK() __set_PRIMASK(_SEGGER_RTT__LockState); \ - } - #elif (defined (__ARM7EM__) && (__CORE__ == __ARM7EM__)) || \ - (defined (__ARM7M__) && (__CORE__ == __ARM7M__)) || \ - (defined (__ARM8M_MAINLINE__) && (__CORE__ == __ARM8M_MAINLINE__)) || \ - (defined (__ARM8M_MAINLINE__) && (__CORE__ == __ARM8M_MAINLINE__)) - #ifndef SEGGER_RTT_MAX_INTERRUPT_PRIORITY - #define SEGGER_RTT_MAX_INTERRUPT_PRIORITY (0x20) - #endif - #define SEGGER_RTT_LOCK() { \ - unsigned int _SEGGER_RTT__LockState; \ - _SEGGER_RTT__LockState = __get_BASEPRI(); \ - __set_BASEPRI(SEGGER_RTT_MAX_INTERRUPT_PRIORITY); - - #define SEGGER_RTT_UNLOCK() __set_BASEPRI(_SEGGER_RTT__LockState); \ - } - #elif (defined (__ARM7A__) && (__CORE__ == __ARM7A__)) || \ - (defined (__ARM7R__) && (__CORE__ == __ARM7R__)) - #define SEGGER_RTT_LOCK() { \ - unsigned int _SEGGER_RTT__LockState; \ - __asm volatile ("mrs r1, CPSR \n\t" \ - "mov %0, r1 \n\t" \ - "orr r1, r1, #0xC0 \n\t" \ - "msr CPSR_c, r1 \n\t" \ - : "=r" (_SEGGER_RTT__LockState) \ - : \ - : "r1", "cc" \ - ); - - #define SEGGER_RTT_UNLOCK() __asm volatile ("mov r0, %0 \n\t" \ - "mrs r1, CPSR \n\t" \ - "bic r1, r1, #0xC0 \n\t" \ - "and r0, r0, #0xC0 \n\t" \ - "orr r1, r1, r0 \n\t" \ - "msr CPSR_c, r1 \n\t" \ - : \ - : "r" (_SEGGER_RTT__LockState) \ - : "r0", "r1", "cc" \ - ); \ - } - #endif -#endif - -/********************************************************************* -* -* RTT lock configuration for IAR RX -*/ -#ifdef __ICCRX__ - #define SEGGER_RTT_LOCK() { \ - unsigned long _SEGGER_RTT__LockState; \ - _SEGGER_RTT__LockState = __get_interrupt_state(); \ - __disable_interrupt(); - - #define SEGGER_RTT_UNLOCK() __set_interrupt_state(_SEGGER_RTT__LockState); \ - } -#endif - -/********************************************************************* -* -* RTT lock configuration for IAR RL78 -*/ -#ifdef __ICCRL78__ - #define SEGGER_RTT_LOCK() { \ - __istate_t _SEGGER_RTT__LockState; \ - _SEGGER_RTT__LockState = __get_interrupt_state(); \ - __disable_interrupt(); - - #define SEGGER_RTT_UNLOCK() __set_interrupt_state(_SEGGER_RTT__LockState); \ - } -#endif - -/********************************************************************* -* -* RTT lock configuration for KEIL ARM -*/ -#ifdef __CC_ARM - #if (defined __TARGET_ARCH_6S_M) - #define SEGGER_RTT_LOCK() { \ - unsigned int _SEGGER_RTT__LockState; \ - register unsigned char _SEGGER_RTT__PRIMASK __asm( "primask"); \ - _SEGGER_RTT__LockState = _SEGGER_RTT__PRIMASK; \ - _SEGGER_RTT__PRIMASK = 1u; \ - __schedule_barrier(); - - #define SEGGER_RTT_UNLOCK() _SEGGER_RTT__PRIMASK = _SEGGER_RTT__LockState; \ - __schedule_barrier(); \ - } - #elif (defined(__TARGET_ARCH_7_M) || defined(__TARGET_ARCH_7E_M)) - #ifndef SEGGER_RTT_MAX_INTERRUPT_PRIORITY - #define SEGGER_RTT_MAX_INTERRUPT_PRIORITY (0x20) - #endif - #define SEGGER_RTT_LOCK() { \ - unsigned int _SEGGER_RTT__LockState; \ - register unsigned char BASEPRI __asm( "basepri"); \ - _SEGGER_RTT__LockState = BASEPRI; \ - BASEPRI = SEGGER_RTT_MAX_INTERRUPT_PRIORITY; \ - __schedule_barrier(); - - #define SEGGER_RTT_UNLOCK() BASEPRI = _SEGGER_RTT__LockState; \ - __schedule_barrier(); \ - } - #endif -#endif - -/********************************************************************* -* -* RTT lock configuration for TI ARM -*/ -#ifdef __TI_ARM__ - #if defined (__TI_ARM_V6M0__) - #define SEGGER_RTT_LOCK() { \ - unsigned int _SEGGER_RTT__LockState; \ - _SEGGER_RTT__LockState = __get_PRIMASK(); \ - __set_PRIMASK(1); - - #define SEGGER_RTT_UNLOCK() __set_PRIMASK(_SEGGER_RTT__LockState); \ - } - #elif (defined (__TI_ARM_V7M3__) || defined (__TI_ARM_V7M4__)) - #ifndef SEGGER_RTT_MAX_INTERRUPT_PRIORITY - #define SEGGER_RTT_MAX_INTERRUPT_PRIORITY (0x20) - #endif - #define SEGGER_RTT_LOCK() { \ - unsigned int _SEGGER_RTT__LockState; \ - _SEGGER_RTT__LockState = _set_interrupt_priority(SEGGER_RTT_MAX_INTERRUPT_PRIORITY); - - #define SEGGER_RTT_UNLOCK() _set_interrupt_priority(_SEGGER_RTT__LockState); \ - } - #endif -#endif - -/********************************************************************* -* -* RTT lock configuration for CCRX -*/ -#ifdef __RX - #include - #define SEGGER_RTT_LOCK() { \ - unsigned long _SEGGER_RTT__LockState; \ - _SEGGER_RTT__LockState = get_psw() & 0x010000; \ - clrpsw_i(); - - #define SEGGER_RTT_UNLOCK() set_psw(get_psw() | _SEGGER_RTT__LockState); \ - } -#endif - -/********************************************************************* -* -* RTT lock configuration for embOS Simulation on Windows -* (Can also be used for generic RTT locking with embOS) -*/ -#if defined(WIN32) || defined(SEGGER_RTT_LOCK_EMBOS) - -void OS_SIM_EnterCriticalSection(void); -void OS_SIM_LeaveCriticalSection(void); - -#define SEGGER_RTT_LOCK() { \ - OS_SIM_EnterCriticalSection(); - -#define SEGGER_RTT_UNLOCK() OS_SIM_LeaveCriticalSection(); \ - } -#endif - -/********************************************************************* -* -* RTT lock configuration fallback -*/ -#ifndef SEGGER_RTT_LOCK - #define SEGGER_RTT_LOCK() // Lock RTT (nestable) (i.e. disable interrupts) -#endif - -#ifndef SEGGER_RTT_UNLOCK - #define SEGGER_RTT_UNLOCK() // Unlock RTT (nestable) (i.e. enable previous interrupt lock state) -#endif - -#endif -/*************************** End of file ****************************/ +/********************************************************************* +* SEGGER Microcontroller GmbH * +* The Embedded Experts * +********************************************************************** +* * +* (c) 1995 - 2019 SEGGER Microcontroller GmbH * +* * +* www.segger.com Support: support@segger.com * +* * +********************************************************************** +* * +* SEGGER SystemView * Real-time application analysis * +* * +********************************************************************** +* * +* All rights reserved. * +* * +* SEGGER strongly recommends to not make any changes * +* to or modify the source code of this software in order to stay * +* compatible with the SystemView and RTT protocol, and J-Link. * +* * +* Redistribution and use in source and binary forms, with or * +* without modification, are permitted provided that the following * +* condition is met: * +* * +* o Redistributions of source code must retain the above copyright * +* notice, this condition and the following disclaimer. * +* * +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND * +* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * +* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * +* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * +* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR * +* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * +* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * +* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * +* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * +* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE * +* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH * +* DAMAGE. * +* * +********************************************************************** +* * +* SystemView version: 3.20 * +* * +********************************************************************** +---------------------------END-OF-HEADER------------------------------ +File : SEGGER_RTT_Conf.h +Purpose : Implementation of SEGGER real-time transfer (RTT) which + allows real-time communication on targets which support + debugger memory accesses while the CPU is running. +Revision: $Rev: 21386 $ + +*/ + +#ifndef SEGGER_RTT_CONF_H +#define SEGGER_RTT_CONF_H + +#ifdef __IAR_SYSTEMS_ICC__ + #include +#endif + +/********************************************************************* +* +* Defines, configurable +* +********************************************************************** +*/ + +// +// Take in and set to correct values for Cortex-A systems with CPU cache +// +//#define SEGGER_RTT_CPU_CACHE_LINE_SIZE (32) // Largest cache line size (in bytes) in the current system +//#define SEGGER_RTT_UNCACHED_OFF (0xFB000000) // Address alias where RTT CB and buffers can be accessed uncached +// +// Most common case: +// Up-channel 0: RTT +// Up-channel 1: SystemView +// +#ifndef SEGGER_RTT_MAX_NUM_UP_BUFFERS + #define SEGGER_RTT_MAX_NUM_UP_BUFFERS (3) // Max. number of up-buffers (T->H) available on this target (Default: 3) +#endif +// +// Most common case: +// Down-channel 0: RTT +// Down-channel 1: SystemView +// +#ifndef SEGGER_RTT_MAX_NUM_DOWN_BUFFERS + #define SEGGER_RTT_MAX_NUM_DOWN_BUFFERS (3) // Max. number of down-buffers (H->T) available on this target (Default: 3) +#endif + +#ifndef BUFFER_SIZE_UP + #define BUFFER_SIZE_UP (1024) // Size of the buffer for terminal output of target, up to host (Default: 1k) +#endif + +#ifndef BUFFER_SIZE_DOWN + #define BUFFER_SIZE_DOWN (16) // Size of the buffer for terminal input to target from host (Usually keyboard input) (Default: 16) +#endif + +#ifndef SEGGER_RTT_PRINTF_BUFFER_SIZE + #define SEGGER_RTT_PRINTF_BUFFER_SIZE (64u) // Size of buffer for RTT printf to bulk-send chars via RTT (Default: 64) +#endif + +#ifndef SEGGER_RTT_MODE_DEFAULT + #define SEGGER_RTT_MODE_DEFAULT SEGGER_RTT_MODE_NO_BLOCK_SKIP // Mode for pre-initialized terminal channel (buffer 0) +#endif + +/********************************************************************* +* +* RTT memcpy configuration +* +* memcpy() is good for large amounts of data, +* but the overhead is big for small amounts, which are usually stored via RTT. +* With SEGGER_RTT_MEMCPY_USE_BYTELOOP a simple byte loop can be used instead. +* +* SEGGER_RTT_MEMCPY() can be used to replace standard memcpy() in RTT functions. +* This is may be required with memory access restrictions, +* such as on Cortex-A devices with MMU. +*/ +#ifndef SEGGER_RTT_MEMCPY_USE_BYTELOOP + #define SEGGER_RTT_MEMCPY_USE_BYTELOOP 0 // 0: Use memcpy/SEGGER_RTT_MEMCPY, 1: Use a simple byte-loop +#endif +// +// Example definition of SEGGER_RTT_MEMCPY to external memcpy with GCC toolchains and Cortex-A targets +// +//#if ((defined __SES_ARM) || (defined __CROSSWORKS_ARM) || (defined __GNUC__)) && (defined (__ARM_ARCH_7A__)) +// #define SEGGER_RTT_MEMCPY(pDest, pSrc, NumBytes) SEGGER_memcpy((pDest), (pSrc), (NumBytes)) +//#endif + +// +// Target is not allowed to perform other RTT operations while string still has not been stored completely. +// Otherwise we would probably end up with a mixed string in the buffer. +// If using RTT from within interrupts, multiple tasks or multi processors, define the SEGGER_RTT_LOCK() and SEGGER_RTT_UNLOCK() function here. +// +// SEGGER_RTT_MAX_INTERRUPT_PRIORITY can be used in the sample lock routines on Cortex-M3/4. +// Make sure to mask all interrupts which can send RTT data, i.e. generate SystemView events, or cause task switches. +// When high-priority interrupts must not be masked while sending RTT data, SEGGER_RTT_MAX_INTERRUPT_PRIORITY needs to be adjusted accordingly. +// (Higher priority = lower priority number) +// Default value for embOS: 128u +// Default configuration in FreeRTOS: configMAX_SYSCALL_INTERRUPT_PRIORITY: ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) ) +// In case of doubt mask all interrupts: 1 << (8 - BASEPRI_PRIO_BITS) i.e. 1 << 5 when 3 bits are implemented in NVIC +// or define SEGGER_RTT_LOCK() to completely disable interrupts. +// +#ifndef SEGGER_RTT_MAX_INTERRUPT_PRIORITY + #define SEGGER_RTT_MAX_INTERRUPT_PRIORITY (0x20) // Interrupt priority to lock on SEGGER_RTT_LOCK on Cortex-M3/4 (Default: 0x20) +#endif + +/********************************************************************* +* +* RTT lock configuration for SEGGER Embedded Studio, +* Rowley CrossStudio and GCC +*/ +#if ((defined(__SES_ARM) || defined(__SES_RISCV) || defined(__CROSSWORKS_ARM) || defined(__GNUC__) || defined(__clang__)) && !defined (__CC_ARM) && !defined(WIN32)) + #if (defined(__ARM_ARCH_6M__) || defined(__ARM_ARCH_8M_BASE__)) + #define SEGGER_RTT_LOCK() { \ + unsigned int _SEGGER_RTT__LockState; \ + __asm volatile ("mrs %0, primask \n\t" \ + "movs r1, #1 \n\t" \ + "msr primask, r1 \n\t" \ + : "=r" (_SEGGER_RTT__LockState) \ + : \ + : "r1", "cc" \ + ); + + #define SEGGER_RTT_UNLOCK() __asm volatile ("msr primask, %0 \n\t" \ + : \ + : "r" (_SEGGER_RTT__LockState) \ + : \ + ); \ + } + #elif (defined(__ARM_ARCH_7M__) || defined(__ARM_ARCH_7EM__) || defined(__ARM_ARCH_8M_MAIN__)) + #ifndef SEGGER_RTT_MAX_INTERRUPT_PRIORITY + #define SEGGER_RTT_MAX_INTERRUPT_PRIORITY (0x20) + #endif + #define SEGGER_RTT_LOCK() { \ + unsigned int _SEGGER_RTT__LockState; \ + __asm volatile ("mrs %0, basepri \n\t" \ + "mov r1, %1 \n\t" \ + "msr basepri, r1 \n\t" \ + : "=r" (_SEGGER_RTT__LockState) \ + : "i"(SEGGER_RTT_MAX_INTERRUPT_PRIORITY) \ + : "r1", "cc" \ + ); + + #define SEGGER_RTT_UNLOCK() __asm volatile ("msr basepri, %0 \n\t" \ + : \ + : "r" (_SEGGER_RTT__LockState) \ + : \ + ); \ + } + + #elif defined(__ARM_ARCH_7A__) + #define SEGGER_RTT_LOCK() { \ + unsigned int _SEGGER_RTT__LockState; \ + __asm volatile ("mrs r1, CPSR \n\t" \ + "mov %0, r1 \n\t" \ + "orr r1, r1, #0xC0 \n\t" \ + "msr CPSR_c, r1 \n\t" \ + : "=r" (_SEGGER_RTT__LockState) \ + : \ + : "r1", "cc" \ + ); + + #define SEGGER_RTT_UNLOCK() __asm volatile ("mov r0, %0 \n\t" \ + "mrs r1, CPSR \n\t" \ + "bic r1, r1, #0xC0 \n\t" \ + "and r0, r0, #0xC0 \n\t" \ + "orr r1, r1, r0 \n\t" \ + "msr CPSR_c, r1 \n\t" \ + : \ + : "r" (_SEGGER_RTT__LockState) \ + : "r0", "r1", "cc" \ + ); \ + } + #elif defined(__riscv) || defined(__riscv_xlen) + #define SEGGER_RTT_LOCK() { \ + unsigned int _SEGGER_RTT__LockState; \ + __asm volatile ("csrr %0, mstatus \n\t" \ + "csrci mstatus, 8 \n\t" \ + "andi %0, %0, 8 \n\t" \ + : "=r" (_SEGGER_RTT__LockState) \ + : \ + : \ + ); + + #define SEGGER_RTT_UNLOCK() __asm volatile ("csrr a1, mstatus \n\t" \ + "or %0, %0, a1 \n\t" \ + "csrs mstatus, %0 \n\t" \ + : \ + : "r" (_SEGGER_RTT__LockState) \ + : "a1" \ + ); \ + } + #else + #define SEGGER_RTT_LOCK() + #define SEGGER_RTT_UNLOCK() + #endif +#endif + +/********************************************************************* +* +* RTT lock configuration for IAR EWARM +*/ +#ifdef __ICCARM__ + #if (defined (__ARM6M__) && (__CORE__ == __ARM6M__)) || \ + (defined (__ARM8M_BASELINE__) && (__CORE__ == __ARM8M_BASELINE__)) + #define SEGGER_RTT_LOCK() { \ + unsigned int _SEGGER_RTT__LockState; \ + _SEGGER_RTT__LockState = __get_PRIMASK(); \ + __set_PRIMASK(1); + + #define SEGGER_RTT_UNLOCK() __set_PRIMASK(_SEGGER_RTT__LockState); \ + } + #elif (defined (__ARM7EM__) && (__CORE__ == __ARM7EM__)) || \ + (defined (__ARM7M__) && (__CORE__ == __ARM7M__)) || \ + (defined (__ARM8M_MAINLINE__) && (__CORE__ == __ARM8M_MAINLINE__)) || \ + (defined (__ARM8M_MAINLINE__) && (__CORE__ == __ARM8M_MAINLINE__)) + #ifndef SEGGER_RTT_MAX_INTERRUPT_PRIORITY + #define SEGGER_RTT_MAX_INTERRUPT_PRIORITY (0x20) + #endif + #define SEGGER_RTT_LOCK() { \ + unsigned int _SEGGER_RTT__LockState; \ + _SEGGER_RTT__LockState = __get_BASEPRI(); \ + __set_BASEPRI(SEGGER_RTT_MAX_INTERRUPT_PRIORITY); + + #define SEGGER_RTT_UNLOCK() __set_BASEPRI(_SEGGER_RTT__LockState); \ + } + #elif (defined (__ARM7A__) && (__CORE__ == __ARM7A__)) || \ + (defined (__ARM7R__) && (__CORE__ == __ARM7R__)) + #define SEGGER_RTT_LOCK() { \ + unsigned int _SEGGER_RTT__LockState; \ + __asm volatile ("mrs r1, CPSR \n\t" \ + "mov %0, r1 \n\t" \ + "orr r1, r1, #0xC0 \n\t" \ + "msr CPSR_c, r1 \n\t" \ + : "=r" (_SEGGER_RTT__LockState) \ + : \ + : "r1", "cc" \ + ); + + #define SEGGER_RTT_UNLOCK() __asm volatile ("mov r0, %0 \n\t" \ + "mrs r1, CPSR \n\t" \ + "bic r1, r1, #0xC0 \n\t" \ + "and r0, r0, #0xC0 \n\t" \ + "orr r1, r1, r0 \n\t" \ + "msr CPSR_c, r1 \n\t" \ + : \ + : "r" (_SEGGER_RTT__LockState) \ + : "r0", "r1", "cc" \ + ); \ + } + #endif +#endif + +/********************************************************************* +* +* RTT lock configuration for IAR RX +*/ +#ifdef __ICCRX__ + #define SEGGER_RTT_LOCK() { \ + unsigned long _SEGGER_RTT__LockState; \ + _SEGGER_RTT__LockState = __get_interrupt_state(); \ + __disable_interrupt(); + + #define SEGGER_RTT_UNLOCK() __set_interrupt_state(_SEGGER_RTT__LockState); \ + } +#endif + +/********************************************************************* +* +* RTT lock configuration for IAR RL78 +*/ +#ifdef __ICCRL78__ + #define SEGGER_RTT_LOCK() { \ + __istate_t _SEGGER_RTT__LockState; \ + _SEGGER_RTT__LockState = __get_interrupt_state(); \ + __disable_interrupt(); + + #define SEGGER_RTT_UNLOCK() __set_interrupt_state(_SEGGER_RTT__LockState); \ + } +#endif + +/********************************************************************* +* +* RTT lock configuration for KEIL ARM +*/ +#ifdef __CC_ARM + #if (defined __TARGET_ARCH_6S_M) + #define SEGGER_RTT_LOCK() { \ + unsigned int _SEGGER_RTT__LockState; \ + register unsigned char _SEGGER_RTT__PRIMASK __asm( "primask"); \ + _SEGGER_RTT__LockState = _SEGGER_RTT__PRIMASK; \ + _SEGGER_RTT__PRIMASK = 1u; \ + __schedule_barrier(); + + #define SEGGER_RTT_UNLOCK() _SEGGER_RTT__PRIMASK = _SEGGER_RTT__LockState; \ + __schedule_barrier(); \ + } + #elif (defined(__TARGET_ARCH_7_M) || defined(__TARGET_ARCH_7E_M)) + #ifndef SEGGER_RTT_MAX_INTERRUPT_PRIORITY + #define SEGGER_RTT_MAX_INTERRUPT_PRIORITY (0x20) + #endif + #define SEGGER_RTT_LOCK() { \ + unsigned int _SEGGER_RTT__LockState; \ + register unsigned char BASEPRI __asm( "basepri"); \ + _SEGGER_RTT__LockState = BASEPRI; \ + BASEPRI = SEGGER_RTT_MAX_INTERRUPT_PRIORITY; \ + __schedule_barrier(); + + #define SEGGER_RTT_UNLOCK() BASEPRI = _SEGGER_RTT__LockState; \ + __schedule_barrier(); \ + } + #endif +#endif + +/********************************************************************* +* +* RTT lock configuration for TI ARM +*/ +#ifdef __TI_ARM__ + #if defined (__TI_ARM_V6M0__) + #define SEGGER_RTT_LOCK() { \ + unsigned int _SEGGER_RTT__LockState; \ + _SEGGER_RTT__LockState = __get_PRIMASK(); \ + __set_PRIMASK(1); + + #define SEGGER_RTT_UNLOCK() __set_PRIMASK(_SEGGER_RTT__LockState); \ + } + #elif (defined (__TI_ARM_V7M3__) || defined (__TI_ARM_V7M4__)) + #ifndef SEGGER_RTT_MAX_INTERRUPT_PRIORITY + #define SEGGER_RTT_MAX_INTERRUPT_PRIORITY (0x20) + #endif + #define SEGGER_RTT_LOCK() { \ + unsigned int _SEGGER_RTT__LockState; \ + _SEGGER_RTT__LockState = _set_interrupt_priority(SEGGER_RTT_MAX_INTERRUPT_PRIORITY); + + #define SEGGER_RTT_UNLOCK() _set_interrupt_priority(_SEGGER_RTT__LockState); \ + } + #endif +#endif + +/********************************************************************* +* +* RTT lock configuration for CCRX +*/ +#ifdef __RX + #include + #define SEGGER_RTT_LOCK() { \ + unsigned long _SEGGER_RTT__LockState; \ + _SEGGER_RTT__LockState = get_psw() & 0x010000; \ + clrpsw_i(); + + #define SEGGER_RTT_UNLOCK() set_psw(get_psw() | _SEGGER_RTT__LockState); \ + } +#endif + +/********************************************************************* +* +* RTT lock configuration for embOS Simulation on Windows +* (Can also be used for generic RTT locking with embOS) +*/ +#if defined(WIN32) || defined(SEGGER_RTT_LOCK_EMBOS) + +void OS_SIM_EnterCriticalSection(void); +void OS_SIM_LeaveCriticalSection(void); + +#define SEGGER_RTT_LOCK() { \ + OS_SIM_EnterCriticalSection(); + +#define SEGGER_RTT_UNLOCK() OS_SIM_LeaveCriticalSection(); \ + } +#endif + +/********************************************************************* +* +* RTT lock configuration fallback +*/ +#ifndef SEGGER_RTT_LOCK + #define SEGGER_RTT_LOCK() // Lock RTT (nestable) (i.e. disable interrupts) +#endif + +#ifndef SEGGER_RTT_UNLOCK + #define SEGGER_RTT_UNLOCK() // Unlock RTT (nestable) (i.e. enable previous interrupt lock state) +#endif + +#endif +/*************************** End of file ****************************/ diff --git a/core/embed/segger/Config/SEGGER_SYSVIEW_Conf.h b/core/embed/segger/Config/SEGGER_SYSVIEW_Conf.h index 4a7fce010c..4d88871d35 100644 --- a/core/embed/segger/Config/SEGGER_SYSVIEW_Conf.h +++ b/core/embed/segger/Config/SEGGER_SYSVIEW_Conf.h @@ -1,86 +1,86 @@ -/********************************************************************* -* SEGGER Microcontroller GmbH * -* The Embedded Experts * -********************************************************************** -* * -* (c) 1995 - 2019 SEGGER Microcontroller GmbH * -* * -* www.segger.com Support: support@segger.com * -* * -********************************************************************** -* * -* SEGGER SystemView * Real-time application analysis * -* * -********************************************************************** -* * -* All rights reserved. * -* * -* SEGGER strongly recommends to not make any changes * -* to or modify the source code of this software in order to stay * -* compatible with the SystemView and RTT protocol, and J-Link. * -* * -* Redistribution and use in source and binary forms, with or * -* without modification, are permitted provided that the following * -* condition is met: * -* * -* o Redistributions of source code must retain the above copyright * -* notice, this condition and the following disclaimer. * -* * -* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND * -* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * -* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * -* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * -* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR * -* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * -* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * -* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * -* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * -* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * -* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE * -* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH * -* DAMAGE. * -* * -********************************************************************** -* * -* SystemView version: 3.20 * -* * -********************************************************************** --------------------------- END-OF-HEADER ----------------------------- - -File : SEGGER_SYSVIEW_Conf.h -Purpose : SEGGER SystemView configuration file. - Set defines which deviate from the defaults (see SEGGER_SYSVIEW_ConfDefaults.h) here. -Revision: $Rev: 21292 $ - -Additional information: - Required defines which must be set are: - SEGGER_SYSVIEW_GET_TIMESTAMP - SEGGER_SYSVIEW_GET_INTERRUPT_ID - For known compilers and cores, these might be set to good defaults - in SEGGER_SYSVIEW_ConfDefaults.h. - - SystemView needs a (nestable) locking mechanism. - If not defined, the RTT locking mechanism is used, - which then needs to be properly configured. -*/ - -#ifndef SEGGER_SYSVIEW_CONF_H -#define SEGGER_SYSVIEW_CONF_H - -/********************************************************************* -* -* Defines, configurable -* -********************************************************************** -*/ - -/********************************************************************* -* TODO: Add your defines here. * -********************************************************************** -*/ - -#define SEGGER_SYSVIEW_BUFFER_SECTION "CCMRAM" - -#endif // SEGGER_SYSVIEW_CONF_H - -/*************************** End of file ****************************/ +/********************************************************************* +* SEGGER Microcontroller GmbH * +* The Embedded Experts * +********************************************************************** +* * +* (c) 1995 - 2019 SEGGER Microcontroller GmbH * +* * +* www.segger.com Support: support@segger.com * +* * +********************************************************************** +* * +* SEGGER SystemView * Real-time application analysis * +* * +********************************************************************** +* * +* All rights reserved. * +* * +* SEGGER strongly recommends to not make any changes * +* to or modify the source code of this software in order to stay * +* compatible with the SystemView and RTT protocol, and J-Link. * +* * +* Redistribution and use in source and binary forms, with or * +* without modification, are permitted provided that the following * +* condition is met: * +* * +* o Redistributions of source code must retain the above copyright * +* notice, this condition and the following disclaimer. * +* * +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND * +* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * +* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * +* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * +* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR * +* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * +* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * +* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * +* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * +* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE * +* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH * +* DAMAGE. * +* * +********************************************************************** +* * +* SystemView version: 3.20 * +* * +********************************************************************** +-------------------------- END-OF-HEADER ----------------------------- + +File : SEGGER_SYSVIEW_Conf.h +Purpose : SEGGER SystemView configuration file. + Set defines which deviate from the defaults (see SEGGER_SYSVIEW_ConfDefaults.h) here. +Revision: $Rev: 21292 $ + +Additional information: + Required defines which must be set are: + SEGGER_SYSVIEW_GET_TIMESTAMP + SEGGER_SYSVIEW_GET_INTERRUPT_ID + For known compilers and cores, these might be set to good defaults + in SEGGER_SYSVIEW_ConfDefaults.h. + + SystemView needs a (nestable) locking mechanism. + If not defined, the RTT locking mechanism is used, + which then needs to be properly configured. +*/ + +#ifndef SEGGER_SYSVIEW_CONF_H +#define SEGGER_SYSVIEW_CONF_H + +/********************************************************************* +* +* Defines, configurable +* +********************************************************************** +*/ + +/********************************************************************* +* TODO: Add your defines here. * +********************************************************************** +*/ + +#define SEGGER_SYSVIEW_BUFFER_SECTION "CCMRAM" + +#endif // SEGGER_SYSVIEW_CONF_H + +/*************************** End of file ****************************/ diff --git a/core/embed/segger/SEGGER/SEGGER.h b/core/embed/segger/SEGGER/SEGGER.h index 02beb9223e..397bae8d22 100644 --- a/core/embed/segger/SEGGER/SEGGER.h +++ b/core/embed/segger/SEGGER/SEGGER.h @@ -1,248 +1,248 @@ -/********************************************************************* -* SEGGER Microcontroller GmbH * -* The Embedded Experts * -********************************************************************** -* * -* (c) 1995 - 2019 SEGGER Microcontroller GmbH * -* * -* www.segger.com Support: support@segger.com * -* * -********************************************************************** -* * -* SEGGER SystemView * Real-time application analysis * -* * -********************************************************************** -* * -* All rights reserved. * -* * -* SEGGER strongly recommends to not make any changes * -* to or modify the source code of this software in order to stay * -* compatible with the SystemView and RTT protocol, and J-Link. * -* * -* Redistribution and use in source and binary forms, with or * -* without modification, are permitted provided that the following * -* condition is met: * -* * -* o Redistributions of source code must retain the above copyright * -* notice, this condition and the following disclaimer. * -* * -* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND * -* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * -* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * -* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * -* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR * -* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * -* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * -* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * -* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * -* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * -* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE * -* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH * -* DAMAGE. * -* * -********************************************************************** -* * -* SystemView version: 3.20 * -* * -********************************************************************** ----------------------------------------------------------------------- -File : SEGGER.h -Purpose : Global types etc & general purpose utility functions -Revision: $Rev: 18102 $ ----------------------------END-OF-HEADER------------------------------ -*/ - -#ifndef SEGGER_H // Guard against multiple inclusion -#define SEGGER_H - -#include // For va_list. -#include "Global.h" // Type definitions: U8, U16, U32, I8, I16, I32 - -#if defined(__cplusplus) -extern "C" { /* Make sure we have C-declarations in C++ programs */ -#endif - -/********************************************************************* -* -* Keywords/specifiers -* -********************************************************************** -*/ - -#ifndef INLINE - #if (defined(__ICCARM__) || defined(__RX) || defined(__ICCRX__)) - // - // Other known compilers. - // - #define INLINE inline - #else - #if (defined(_WIN32) && !defined(__clang__)) - // - // Microsoft VC6 and newer. - // Force inlining without cost checking. - // - #define INLINE __forceinline - #elif defined(__GNUC__) || defined(__clang__) - // - // Force inlining with GCC + clang - // - #define INLINE inline __attribute__((always_inline)) - #elif (defined(__CC_ARM)) - // - // Force inlining with ARMCC (Keil) - // - #define INLINE __inline - #else - // - // Unknown compilers. - // - #define INLINE - #endif - #endif -#endif - -/********************************************************************* -* -* Function-like macros -* -********************************************************************** -*/ - -#define SEGGER_COUNTOF(a) (sizeof((a))/sizeof((a)[0])) -#define SEGGER_MIN(a,b) (((a) < (b)) ? (a) : (b)) -#define SEGGER_MAX(a,b) (((a) > (b)) ? (a) : (b)) - -#ifndef SEGGER_USE_PARA // Some compiler complain about unused parameters. - #define SEGGER_USE_PARA(Para) (void)Para // This works for most compilers. -#endif - -#define SEGGER_ADDR2PTR(Type, Addr) (/*lint -e(923) -e(9078)*/((Type*)((PTR_ADDR)(Addr)))) // Allow cast from address to pointer. -#define SEGGER_PTR2ADDR(p) (/*lint -e(923) -e(9078)*/((PTR_ADDR)(p))) // Allow cast from pointer to address. -#define SEGGER_PTR2PTR(Type, p) (/*lint -e(740) -e(826) -e(9079) -e(9087)*/((Type*)(p))) // Allow cast from one pointer type to another (ignore different size). -#define SEGGER_PTR_DISTANCE(p0, p1) (SEGGER_PTR2ADDR(p0) - SEGGER_PTR2ADDR(p1)) - -/********************************************************************* -* -* Defines -* -********************************************************************** -*/ - -#define SEGGER_PRINTF_FLAG_ADJLEFT (1 << 0) -#define SEGGER_PRINTF_FLAG_SIGNFORCE (1 << 1) -#define SEGGER_PRINTF_FLAG_SIGNSPACE (1 << 2) -#define SEGGER_PRINTF_FLAG_PRECEED (1 << 3) -#define SEGGER_PRINTF_FLAG_ZEROPAD (1 << 4) -#define SEGGER_PRINTF_FLAG_NEGATIVE (1 << 5) - -/********************************************************************* -* -* Types -* -********************************************************************** -*/ - -typedef struct { - char* pBuffer; - int BufferSize; - int Cnt; -} SEGGER_BUFFER_DESC; - -typedef struct { - unsigned int CacheLineSize; // 0: No Cache. Most Systems such as ARM9 use a 32 bytes cache line size. - void (*pfDMB) (void); // Optional DMB function for Data Memory Barrier to make sure all memory operations are completed. - void (*pfClean) (void *p, unsigned long NumBytes); // Optional clean function for cached memory. - void (*pfInvalidate)(void *p, unsigned long NumBytes); // Optional invalidate function for cached memory. -} SEGGER_CACHE_CONFIG; - -typedef struct SEGGER_SNPRINTF_CONTEXT_struct SEGGER_SNPRINTF_CONTEXT; - -struct SEGGER_SNPRINTF_CONTEXT_struct { - void* pContext; // Application specific context. - SEGGER_BUFFER_DESC* pBufferDesc; // Buffer descriptor to use for output. - void (*pfFlush)(SEGGER_SNPRINTF_CONTEXT* pContext); // Callback executed once the buffer is full. Callback decides if the buffer gets cleared to store more or not. -}; - -typedef struct { - void (*pfStoreChar) (SEGGER_BUFFER_DESC* pBufferDesc, SEGGER_SNPRINTF_CONTEXT* pContext, char c); - int (*pfPrintUnsigned) (SEGGER_BUFFER_DESC* pBufferDesc, SEGGER_SNPRINTF_CONTEXT* pContext, U32 v, unsigned Base, char Flags, int Width, int Precision); - int (*pfPrintInt) (SEGGER_BUFFER_DESC* pBufferDesc, SEGGER_SNPRINTF_CONTEXT* pContext, I32 v, unsigned Base, char Flags, int Width, int Precision); -} SEGGER_PRINTF_API; - -typedef void (*SEGGER_pFormatter)(SEGGER_BUFFER_DESC* pBufferDesc, SEGGER_SNPRINTF_CONTEXT* pContext, const SEGGER_PRINTF_API* pApi, va_list* pParamList, char Lead, int Width, int Precision); - -typedef struct SEGGER_PRINTF_FORMATTER { - struct SEGGER_PRINTF_FORMATTER* pNext; // Pointer to next formatter. - SEGGER_pFormatter pfFormatter; // Formatter function. - char Specifier; // Format specifier. -} SEGGER_PRINTF_FORMATTER; - -typedef struct { - U32 (*pfGetHPTimestamp)(void); // Mandatory, pfGetHPTimestamp - int (*pfGetUID) (U8 abUID[16]); // Optional, pfGetUID -} SEGGER_BSP_API; - -/********************************************************************* -* -* Utility functions -* -********************************************************************** -*/ - -// -// Memory operations. -// -void SEGGER_ARM_memcpy(void* pDest, const void* pSrc, int NumBytes); -void SEGGER_memcpy (void* pDest, const void* pSrc, unsigned NumBytes); -void SEGGER_memxor (void* pDest, const void* pSrc, unsigned NumBytes); - -// -// String functions. -// -int SEGGER_atoi (const char* s); -int SEGGER_isalnum (int c); -int SEGGER_isalpha (int c); -unsigned SEGGER_strlen (const char* s); -int SEGGER_tolower (int c); -int SEGGER_strcasecmp (const char* sText1, const char* sText2); -int SEGGER_strncasecmp(const char *sText1, const char *sText2, unsigned Count); - -// -// Buffer/printf related. -// -void SEGGER_StoreChar (SEGGER_BUFFER_DESC* pBufferDesc, char c); -void SEGGER_PrintUnsigned(SEGGER_BUFFER_DESC* pBufferDesc, U32 v, unsigned Base, int Precision); -void SEGGER_PrintInt (SEGGER_BUFFER_DESC* pBufferDesc, I32 v, unsigned Base, int Precision); -int SEGGER_snprintf (char* pBuffer, int BufferSize, const char* sFormat, ...); -int SEGGER_vsnprintf (char* pBuffer, int BufferSize, const char* sFormat, va_list ParamList); -int SEGGER_vsnprintfEx (SEGGER_SNPRINTF_CONTEXT* pContext, const char* sFormat, va_list ParamList); - -int SEGGER_PRINTF_AddFormatter (SEGGER_PRINTF_FORMATTER* pFormatter, SEGGER_pFormatter pfFormatter, char c); -void SEGGER_PRINTF_AddDoubleFormatter (void); -void SEGGER_PRINTF_AddIPFormatter (void); -void SEGGER_PRINTF_AddBLUEFormatter (void); -void SEGGER_PRINTF_AddCONNECTFormatter(void); -void SEGGER_PRINTF_AddSSLFormatter (void); -void SEGGER_PRINTF_AddSSHFormatter (void); -void SEGGER_PRINTF_AddHTMLFormatter (void); - -// -// BSP abstraction API. -// -int SEGGER_BSP_GetUID (U8 abUID[16]); -int SEGGER_BSP_GetUID32(U32* pUID); -void SEGGER_BSP_SetAPI (const SEGGER_BSP_API* pAPI); -void SEGGER_BSP_SeedUID (void); - -// -// Other API. -// -void SEGGER_VERSION_GetString(char acText[8], unsigned Version); - -#if defined(__cplusplus) -} /* Make sure we have C-declarations in C++ programs */ -#endif - -#endif // Avoid multiple inclusion - -/*************************** End of file ****************************/ +/********************************************************************* +* SEGGER Microcontroller GmbH * +* The Embedded Experts * +********************************************************************** +* * +* (c) 1995 - 2019 SEGGER Microcontroller GmbH * +* * +* www.segger.com Support: support@segger.com * +* * +********************************************************************** +* * +* SEGGER SystemView * Real-time application analysis * +* * +********************************************************************** +* * +* All rights reserved. * +* * +* SEGGER strongly recommends to not make any changes * +* to or modify the source code of this software in order to stay * +* compatible with the SystemView and RTT protocol, and J-Link. * +* * +* Redistribution and use in source and binary forms, with or * +* without modification, are permitted provided that the following * +* condition is met: * +* * +* o Redistributions of source code must retain the above copyright * +* notice, this condition and the following disclaimer. * +* * +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND * +* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * +* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * +* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * +* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR * +* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * +* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * +* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * +* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * +* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE * +* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH * +* DAMAGE. * +* * +********************************************************************** +* * +* SystemView version: 3.20 * +* * +********************************************************************** +---------------------------------------------------------------------- +File : SEGGER.h +Purpose : Global types etc & general purpose utility functions +Revision: $Rev: 18102 $ +---------------------------END-OF-HEADER------------------------------ +*/ + +#ifndef SEGGER_H // Guard against multiple inclusion +#define SEGGER_H + +#include // For va_list. +#include "Global.h" // Type definitions: U8, U16, U32, I8, I16, I32 + +#if defined(__cplusplus) +extern "C" { /* Make sure we have C-declarations in C++ programs */ +#endif + +/********************************************************************* +* +* Keywords/specifiers +* +********************************************************************** +*/ + +#ifndef INLINE + #if (defined(__ICCARM__) || defined(__RX) || defined(__ICCRX__)) + // + // Other known compilers. + // + #define INLINE inline + #else + #if (defined(_WIN32) && !defined(__clang__)) + // + // Microsoft VC6 and newer. + // Force inlining without cost checking. + // + #define INLINE __forceinline + #elif defined(__GNUC__) || defined(__clang__) + // + // Force inlining with GCC + clang + // + #define INLINE inline __attribute__((always_inline)) + #elif (defined(__CC_ARM)) + // + // Force inlining with ARMCC (Keil) + // + #define INLINE __inline + #else + // + // Unknown compilers. + // + #define INLINE + #endif + #endif +#endif + +/********************************************************************* +* +* Function-like macros +* +********************************************************************** +*/ + +#define SEGGER_COUNTOF(a) (sizeof((a))/sizeof((a)[0])) +#define SEGGER_MIN(a,b) (((a) < (b)) ? (a) : (b)) +#define SEGGER_MAX(a,b) (((a) > (b)) ? (a) : (b)) + +#ifndef SEGGER_USE_PARA // Some compiler complain about unused parameters. + #define SEGGER_USE_PARA(Para) (void)Para // This works for most compilers. +#endif + +#define SEGGER_ADDR2PTR(Type, Addr) (/*lint -e(923) -e(9078)*/((Type*)((PTR_ADDR)(Addr)))) // Allow cast from address to pointer. +#define SEGGER_PTR2ADDR(p) (/*lint -e(923) -e(9078)*/((PTR_ADDR)(p))) // Allow cast from pointer to address. +#define SEGGER_PTR2PTR(Type, p) (/*lint -e(740) -e(826) -e(9079) -e(9087)*/((Type*)(p))) // Allow cast from one pointer type to another (ignore different size). +#define SEGGER_PTR_DISTANCE(p0, p1) (SEGGER_PTR2ADDR(p0) - SEGGER_PTR2ADDR(p1)) + +/********************************************************************* +* +* Defines +* +********************************************************************** +*/ + +#define SEGGER_PRINTF_FLAG_ADJLEFT (1 << 0) +#define SEGGER_PRINTF_FLAG_SIGNFORCE (1 << 1) +#define SEGGER_PRINTF_FLAG_SIGNSPACE (1 << 2) +#define SEGGER_PRINTF_FLAG_PRECEED (1 << 3) +#define SEGGER_PRINTF_FLAG_ZEROPAD (1 << 4) +#define SEGGER_PRINTF_FLAG_NEGATIVE (1 << 5) + +/********************************************************************* +* +* Types +* +********************************************************************** +*/ + +typedef struct { + char* pBuffer; + int BufferSize; + int Cnt; +} SEGGER_BUFFER_DESC; + +typedef struct { + unsigned int CacheLineSize; // 0: No Cache. Most Systems such as ARM9 use a 32 bytes cache line size. + void (*pfDMB) (void); // Optional DMB function for Data Memory Barrier to make sure all memory operations are completed. + void (*pfClean) (void *p, unsigned long NumBytes); // Optional clean function for cached memory. + void (*pfInvalidate)(void *p, unsigned long NumBytes); // Optional invalidate function for cached memory. +} SEGGER_CACHE_CONFIG; + +typedef struct SEGGER_SNPRINTF_CONTEXT_struct SEGGER_SNPRINTF_CONTEXT; + +struct SEGGER_SNPRINTF_CONTEXT_struct { + void* pContext; // Application specific context. + SEGGER_BUFFER_DESC* pBufferDesc; // Buffer descriptor to use for output. + void (*pfFlush)(SEGGER_SNPRINTF_CONTEXT* pContext); // Callback executed once the buffer is full. Callback decides if the buffer gets cleared to store more or not. +}; + +typedef struct { + void (*pfStoreChar) (SEGGER_BUFFER_DESC* pBufferDesc, SEGGER_SNPRINTF_CONTEXT* pContext, char c); + int (*pfPrintUnsigned) (SEGGER_BUFFER_DESC* pBufferDesc, SEGGER_SNPRINTF_CONTEXT* pContext, U32 v, unsigned Base, char Flags, int Width, int Precision); + int (*pfPrintInt) (SEGGER_BUFFER_DESC* pBufferDesc, SEGGER_SNPRINTF_CONTEXT* pContext, I32 v, unsigned Base, char Flags, int Width, int Precision); +} SEGGER_PRINTF_API; + +typedef void (*SEGGER_pFormatter)(SEGGER_BUFFER_DESC* pBufferDesc, SEGGER_SNPRINTF_CONTEXT* pContext, const SEGGER_PRINTF_API* pApi, va_list* pParamList, char Lead, int Width, int Precision); + +typedef struct SEGGER_PRINTF_FORMATTER { + struct SEGGER_PRINTF_FORMATTER* pNext; // Pointer to next formatter. + SEGGER_pFormatter pfFormatter; // Formatter function. + char Specifier; // Format specifier. +} SEGGER_PRINTF_FORMATTER; + +typedef struct { + U32 (*pfGetHPTimestamp)(void); // Mandatory, pfGetHPTimestamp + int (*pfGetUID) (U8 abUID[16]); // Optional, pfGetUID +} SEGGER_BSP_API; + +/********************************************************************* +* +* Utility functions +* +********************************************************************** +*/ + +// +// Memory operations. +// +void SEGGER_ARM_memcpy(void* pDest, const void* pSrc, int NumBytes); +void SEGGER_memcpy (void* pDest, const void* pSrc, unsigned NumBytes); +void SEGGER_memxor (void* pDest, const void* pSrc, unsigned NumBytes); + +// +// String functions. +// +int SEGGER_atoi (const char* s); +int SEGGER_isalnum (int c); +int SEGGER_isalpha (int c); +unsigned SEGGER_strlen (const char* s); +int SEGGER_tolower (int c); +int SEGGER_strcasecmp (const char* sText1, const char* sText2); +int SEGGER_strncasecmp(const char *sText1, const char *sText2, unsigned Count); + +// +// Buffer/printf related. +// +void SEGGER_StoreChar (SEGGER_BUFFER_DESC* pBufferDesc, char c); +void SEGGER_PrintUnsigned(SEGGER_BUFFER_DESC* pBufferDesc, U32 v, unsigned Base, int Precision); +void SEGGER_PrintInt (SEGGER_BUFFER_DESC* pBufferDesc, I32 v, unsigned Base, int Precision); +int SEGGER_snprintf (char* pBuffer, int BufferSize, const char* sFormat, ...); +int SEGGER_vsnprintf (char* pBuffer, int BufferSize, const char* sFormat, va_list ParamList); +int SEGGER_vsnprintfEx (SEGGER_SNPRINTF_CONTEXT* pContext, const char* sFormat, va_list ParamList); + +int SEGGER_PRINTF_AddFormatter (SEGGER_PRINTF_FORMATTER* pFormatter, SEGGER_pFormatter pfFormatter, char c); +void SEGGER_PRINTF_AddDoubleFormatter (void); +void SEGGER_PRINTF_AddIPFormatter (void); +void SEGGER_PRINTF_AddBLUEFormatter (void); +void SEGGER_PRINTF_AddCONNECTFormatter(void); +void SEGGER_PRINTF_AddSSLFormatter (void); +void SEGGER_PRINTF_AddSSHFormatter (void); +void SEGGER_PRINTF_AddHTMLFormatter (void); + +// +// BSP abstraction API. +// +int SEGGER_BSP_GetUID (U8 abUID[16]); +int SEGGER_BSP_GetUID32(U32* pUID); +void SEGGER_BSP_SetAPI (const SEGGER_BSP_API* pAPI); +void SEGGER_BSP_SeedUID (void); + +// +// Other API. +// +void SEGGER_VERSION_GetString(char acText[8], unsigned Version); + +#if defined(__cplusplus) +} /* Make sure we have C-declarations in C++ programs */ +#endif + +#endif // Avoid multiple inclusion + +/*************************** End of file ****************************/ diff --git a/core/embed/segger/SEGGER/SEGGER_RTT.c b/core/embed/segger/SEGGER/SEGGER_RTT.c index c5b302bd58..7e6ded94a7 100644 --- a/core/embed/segger/SEGGER/SEGGER_RTT.c +++ b/core/embed/segger/SEGGER/SEGGER_RTT.c @@ -1,2065 +1,2065 @@ -/********************************************************************* -* SEGGER Microcontroller GmbH * -* The Embedded Experts * -********************************************************************** -* * -* (c) 1995 - 2019 SEGGER Microcontroller GmbH * -* * -* www.segger.com Support: support@segger.com * -* * -********************************************************************** -* * -* SEGGER SystemView * Real-time application analysis * -* * -********************************************************************** -* * -* All rights reserved. * -* * -* SEGGER strongly recommends to not make any changes * -* to or modify the source code of this software in order to stay * -* compatible with the SystemView and RTT protocol, and J-Link. * -* * -* Redistribution and use in source and binary forms, with or * -* without modification, are permitted provided that the following * -* condition is met: * -* * -* o Redistributions of source code must retain the above copyright * -* notice, this condition and the following disclaimer. * -* * -* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND * -* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * -* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * -* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * -* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR * -* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * -* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * -* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * -* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * -* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * -* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE * -* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH * -* DAMAGE. * -* * -********************************************************************** -* * -* SystemView version: 3.20 * -* * -********************************************************************** ----------------------------END-OF-HEADER------------------------------ -File : SEGGER_RTT.c -Purpose : Implementation of SEGGER real-time transfer (RTT) which - allows real-time communication on targets which support - debugger memory accesses while the CPU is running. -Revision: $Rev: 20869 $ - -Additional information: - Type "int" is assumed to be 32-bits in size - H->T Host to target communication - T->H Target to host communication - - RTT channel 0 is always present and reserved for Terminal usage. - Name is fixed to "Terminal" - - Effective buffer size: SizeOfBuffer - 1 - - WrOff == RdOff: Buffer is empty - WrOff == (RdOff - 1): Buffer is full - WrOff > RdOff: Free space includes wrap-around - WrOff < RdOff: Used space includes wrap-around - (WrOff == (SizeOfBuffer - 1)) && (RdOff == 0): - Buffer full and wrap-around after next byte - - ----------------------------------------------------------------------- -*/ - -#include "SEGGER_RTT.h" - -#include // for memcpy - -/********************************************************************* -* -* Configuration, default values -* -********************************************************************** -*/ - -#if SEGGER_RTT_CPU_CACHE_LINE_SIZE - #ifdef SEGGER_RTT_CB_ALIGN - #error "Custom SEGGER_RTT_CB_ALIGN() is not supported for SEGGER_RTT_CPU_CACHE_LINE_SIZE != 0" - #endif - #ifdef SEGGER_RTT_BUFFER_ALIGN - #error "Custom SEGGER_RTT_BUFFER_ALIGN() is not supported for SEGGER_RTT_CPU_CACHE_LINE_SIZE != 0" - #endif - #ifdef SEGGER_RTT_PUT_CB_SECTION - #error "Custom SEGGER_RTT_PUT_CB_SECTION() is not supported for SEGGER_RTT_CPU_CACHE_LINE_SIZE != 0" - #endif - #ifdef SEGGER_RTT_PUT_BUFFER_SECTION - #error "Custom SEGGER_RTT_PUT_BUFFER_SECTION() is not supported for SEGGER_RTT_CPU_CACHE_LINE_SIZE != 0" - #endif - #ifdef SEGGER_RTT_BUFFER_ALIGNMENT - #error "Custom SEGGER_RTT_BUFFER_ALIGNMENT is not supported for SEGGER_RTT_CPU_CACHE_LINE_SIZE != 0" - #endif - #ifdef SEGGER_RTT_ALIGNMENT - #error "Custom SEGGER_RTT_ALIGNMENT is not supported for SEGGER_RTT_CPU_CACHE_LINE_SIZE != 0" - #endif -#endif - -#ifndef BUFFER_SIZE_UP - #define BUFFER_SIZE_UP 1024 // Size of the buffer for terminal output of target, up to host -#endif - -#ifndef BUFFER_SIZE_DOWN - #define BUFFER_SIZE_DOWN 16 // Size of the buffer for terminal input to target from host (Usually keyboard input) -#endif - -#ifndef SEGGER_RTT_MAX_NUM_UP_BUFFERS - #define SEGGER_RTT_MAX_NUM_UP_BUFFERS 2 // Number of up-buffers (T->H) available on this target -#endif - -#ifndef SEGGER_RTT_MAX_NUM_DOWN_BUFFERS - #define SEGGER_RTT_MAX_NUM_DOWN_BUFFERS 2 // Number of down-buffers (H->T) available on this target -#endif - -#ifndef SEGGER_RTT_BUFFER_SECTION - #if defined(SEGGER_RTT_SECTION) - #define SEGGER_RTT_BUFFER_SECTION SEGGER_RTT_SECTION - #endif -#endif - -#ifndef SEGGER_RTT_ALIGNMENT - #define SEGGER_RTT_ALIGNMENT SEGGER_RTT_CPU_CACHE_LINE_SIZE -#endif - -#ifndef SEGGER_RTT_BUFFER_ALIGNMENT - #define SEGGER_RTT_BUFFER_ALIGNMENT SEGGER_RTT_CPU_CACHE_LINE_SIZE -#endif - -#ifndef SEGGER_RTT_MODE_DEFAULT - #define SEGGER_RTT_MODE_DEFAULT SEGGER_RTT_MODE_NO_BLOCK_SKIP -#endif - -#ifndef SEGGER_RTT_LOCK - #define SEGGER_RTT_LOCK() -#endif - -#ifndef SEGGER_RTT_UNLOCK - #define SEGGER_RTT_UNLOCK() -#endif - -#ifndef STRLEN - #define STRLEN(a) strlen((a)) -#endif - -#ifndef STRCPY - #define STRCPY(pDest, pSrc) strcpy((pDest), (pSrc)) -#endif - -#ifndef SEGGER_RTT_MEMCPY_USE_BYTELOOP - #define SEGGER_RTT_MEMCPY_USE_BYTELOOP 0 -#endif - -#ifndef SEGGER_RTT_MEMCPY - #ifdef MEMCPY - #define SEGGER_RTT_MEMCPY(pDest, pSrc, NumBytes) MEMCPY((pDest), (pSrc), (NumBytes)) - #else - #define SEGGER_RTT_MEMCPY(pDest, pSrc, NumBytes) memcpy((pDest), (pSrc), (NumBytes)) - #endif -#endif - -#ifndef MIN - #define MIN(a, b) (((a) < (b)) ? (a) : (b)) -#endif - -#ifndef MAX - #define MAX(a, b) (((a) > (b)) ? (a) : (b)) -#endif -// -// For some environments, NULL may not be defined until certain headers are included -// -#ifndef NULL - #define NULL 0 -#endif - -/********************************************************************* -* -* Defines, fixed -* -********************************************************************** -*/ -#if (defined __ICCARM__) || (defined __ICCRX__) - #define RTT_PRAGMA(P) _Pragma(#P) -#endif - -#if SEGGER_RTT_ALIGNMENT || SEGGER_RTT_BUFFER_ALIGNMENT - #if (defined __GNUC__) - #define SEGGER_RTT_ALIGN(Var, Alignment) Var __attribute__ ((aligned (Alignment))) - #elif (defined __ICCARM__) || (defined __ICCRX__) - #define PRAGMA(A) _Pragma(#A) -#define SEGGER_RTT_ALIGN(Var, Alignment) RTT_PRAGMA(data_alignment=Alignment) \ - Var - #elif (defined __CC_ARM) - #define SEGGER_RTT_ALIGN(Var, Alignment) Var __attribute__ ((aligned (Alignment))) - #else - #error "Alignment not supported for this compiler." - #endif -#else - #define SEGGER_RTT_ALIGN(Var, Alignment) Var -#endif - -#if defined(SEGGER_RTT_SECTION) || defined (SEGGER_RTT_BUFFER_SECTION) - #if (defined __GNUC__) - #define SEGGER_RTT_PUT_SECTION(Var, Section) __attribute__ ((section (Section))) Var - #elif (defined __ICCARM__) || (defined __ICCRX__) -#define SEGGER_RTT_PUT_SECTION(Var, Section) RTT_PRAGMA(location=Section) \ - Var - #elif (defined __CC_ARM) - #define SEGGER_RTT_PUT_SECTION(Var, Section) __attribute__ ((section (Section), zero_init)) Var - #else - #error "Section placement not supported for this compiler." - #endif -#else - #define SEGGER_RTT_PUT_SECTION(Var, Section) Var -#endif - -#if SEGGER_RTT_ALIGNMENT - #define SEGGER_RTT_CB_ALIGN(Var) SEGGER_RTT_ALIGN(Var, SEGGER_RTT_ALIGNMENT) -#else - #define SEGGER_RTT_CB_ALIGN(Var) Var -#endif - -#if SEGGER_RTT_BUFFER_ALIGNMENT - #define SEGGER_RTT_BUFFER_ALIGN(Var) SEGGER_RTT_ALIGN(Var, SEGGER_RTT_BUFFER_ALIGNMENT) -#else - #define SEGGER_RTT_BUFFER_ALIGN(Var) Var -#endif - - -#if defined(SEGGER_RTT_SECTION) - #define SEGGER_RTT_PUT_CB_SECTION(Var) SEGGER_RTT_PUT_SECTION(Var, SEGGER_RTT_SECTION) -#else - #define SEGGER_RTT_PUT_CB_SECTION(Var) Var -#endif - -#if defined(SEGGER_RTT_BUFFER_SECTION) - #define SEGGER_RTT_PUT_BUFFER_SECTION(Var) SEGGER_RTT_PUT_SECTION(Var, SEGGER_RTT_BUFFER_SECTION) -#else - #define SEGGER_RTT_PUT_BUFFER_SECTION(Var) Var -#endif - -/********************************************************************* -* -* Static const data -* -********************************************************************** -*/ - -static unsigned char _aTerminalId[16] = { '0', '1', '2', '3', '4', '5', '6', '7', '8', '9', 'A', 'B', 'C', 'D', 'E', 'F' }; - -/********************************************************************* -* -* Static data -* -********************************************************************** -*/ - -// -// RTT Control Block and allocate buffers for channel 0 -// -SEGGER_RTT_PUT_CB_SECTION(SEGGER_RTT_CB_ALIGN(SEGGER_RTT_CB _SEGGER_RTT)); -SEGGER_RTT_PUT_BUFFER_SECTION(SEGGER_RTT_BUFFER_ALIGN(static char _acUpBuffer [SEGGER_RTT__ROUND_UP_2_CACHE_LINE_SIZE(BUFFER_SIZE_UP)])); -SEGGER_RTT_PUT_BUFFER_SECTION(SEGGER_RTT_BUFFER_ALIGN(static char _acDownBuffer[SEGGER_RTT__ROUND_UP_2_CACHE_LINE_SIZE(BUFFER_SIZE_DOWN)])); - -static unsigned char _ActiveTerminal; - -/********************************************************************* -* -* Static functions -* -********************************************************************** -*/ - -/********************************************************************* -* -* _DoInit() -* -* Function description -* Initializes the control block an buffers. -* May only be called via INIT() to avoid overriding settings. -* -*/ -#define INIT() { \ - volatile SEGGER_RTT_CB* pRTTCBInit; \ - pRTTCBInit = (volatile SEGGER_RTT_CB*)((char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); \ - do { \ - if (pRTTCBInit->acID[0] == '\0') { \ - _DoInit(); \ - } \ - } while (0); \ - } - -static void _DoInit(void) { - volatile SEGGER_RTT_CB* p; // Volatile to make sure that compiler cannot change the order of accesses to the control block - // - // Initialize control block - // - p = (volatile SEGGER_RTT_CB*)((char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access control block uncached so that nothing in the cache ever becomes dirty and all changes are visible in HW directly - p->MaxNumUpBuffers = SEGGER_RTT_MAX_NUM_UP_BUFFERS; - p->MaxNumDownBuffers = SEGGER_RTT_MAX_NUM_DOWN_BUFFERS; - // - // Initialize up buffer 0 - // - p->aUp[0].sName = "Terminal"; - p->aUp[0].pBuffer = _acUpBuffer; - p->aUp[0].SizeOfBuffer = BUFFER_SIZE_UP; - p->aUp[0].RdOff = 0u; - p->aUp[0].WrOff = 0u; - p->aUp[0].Flags = SEGGER_RTT_MODE_DEFAULT; - // - // Initialize down buffer 0 - // - p->aDown[0].sName = "Terminal"; - p->aDown[0].pBuffer = _acDownBuffer; - p->aDown[0].SizeOfBuffer = BUFFER_SIZE_DOWN; - p->aDown[0].RdOff = 0u; - p->aDown[0].WrOff = 0u; - p->aDown[0].Flags = SEGGER_RTT_MODE_DEFAULT; - // - // Finish initialization of the control block. - // Copy Id string in three steps to make sure "SEGGER RTT" is not found - // in initializer memory (usually flash) by J-Link - // - STRCPY((char*)&p->acID[7], "RTT"); - RTT__DMB(); // Force order of memory accessed inside core for cores that allow to change the order - STRCPY((char*)&p->acID[0], "SEGGER"); - RTT__DMB(); // Force order of memory accessed inside core for cores that allow to change the order - p->acID[6] = ' '; - RTT__DMB(); // Force order of memory accessed inside core for cores that allow to change the order -} - -/********************************************************************* -* -* _WriteBlocking() -* -* Function description -* Stores a specified number of characters in SEGGER RTT ring buffer -* and updates the associated write pointer which is periodically -* read by the host. -* The caller is responsible for managing the write chunk sizes as -* _WriteBlocking() will block until all data has been posted successfully. -* -* Parameters -* pRing Ring buffer to post to. -* pBuffer Pointer to character array. Does not need to point to a \0 terminated string. -* NumBytes Number of bytes to be stored in the SEGGER RTT control block. -* -* Return value -* >= 0 - Number of bytes written into buffer. -*/ -static unsigned _WriteBlocking(SEGGER_RTT_BUFFER_UP* pRing, const char* pBuffer, unsigned NumBytes) { - unsigned NumBytesToWrite; - unsigned NumBytesWritten; - unsigned RdOff; - unsigned WrOff; - volatile char* pDst; - // - // Write data to buffer and handle wrap-around if necessary - // - NumBytesWritten = 0u; - WrOff = pRing->WrOff; - do { - RdOff = pRing->RdOff; // May be changed by host (debug probe) in the meantime - if (RdOff > WrOff) { - NumBytesToWrite = RdOff - WrOff - 1u; - } else { - NumBytesToWrite = pRing->SizeOfBuffer - (WrOff - RdOff + 1u); - } - NumBytesToWrite = MIN(NumBytesToWrite, (pRing->SizeOfBuffer - WrOff)); // Number of bytes that can be written until buffer wrap-around - NumBytesToWrite = MIN(NumBytesToWrite, NumBytes); - pDst = (pRing->pBuffer + WrOff) + SEGGER_RTT_UNCACHED_OFF; -#if SEGGER_RTT_MEMCPY_USE_BYTELOOP - NumBytesWritten += NumBytesToWrite; - NumBytes -= NumBytesToWrite; - WrOff += NumBytesToWrite; - while (NumBytesToWrite--) { - *pDst++ = *pBuffer++; - }; -#else - SEGGER_RTT_MEMCPY((void*)pDst, pBuffer, NumBytesToWrite); - NumBytesWritten += NumBytesToWrite; - pBuffer += NumBytesToWrite; - NumBytes -= NumBytesToWrite; - WrOff += NumBytesToWrite; -#endif - if (WrOff == pRing->SizeOfBuffer) { - WrOff = 0u; - } - RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses - pRing->WrOff = WrOff; - } while (NumBytes); - return NumBytesWritten; -} - -/********************************************************************* -* -* _WriteNoCheck() -* -* Function description -* Stores a specified number of characters in SEGGER RTT ring buffer -* and updates the associated write pointer which is periodically -* read by the host. -* It is callers responsibility to make sure data actually fits in buffer. -* -* Parameters -* pRing Ring buffer to post to. -* pBuffer Pointer to character array. Does not need to point to a \0 terminated string. -* NumBytes Number of bytes to be stored in the SEGGER RTT control block. -* -* Notes -* (1) If there might not be enough space in the "Up"-buffer, call _WriteBlocking -*/ -static void _WriteNoCheck(SEGGER_RTT_BUFFER_UP* pRing, const char* pData, unsigned NumBytes) { - unsigned NumBytesAtOnce; - unsigned WrOff; - unsigned Rem; - volatile char* pDst; - - WrOff = pRing->WrOff; - Rem = pRing->SizeOfBuffer - WrOff; - if (Rem > NumBytes) { - // - // All data fits before wrap around - // - pDst = (pRing->pBuffer + WrOff) + SEGGER_RTT_UNCACHED_OFF; -#if SEGGER_RTT_MEMCPY_USE_BYTELOOP - WrOff += NumBytes; - while (NumBytes--) { - *pDst++ = *pData++; - }; - RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses - pRing->WrOff = WrOff; -#else - SEGGER_RTT_MEMCPY((void*)pDst, pData, NumBytes); - RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses - pRing->WrOff = WrOff + NumBytes; -#endif - } else { - // - // We reach the end of the buffer, so need to wrap around - // -#if SEGGER_RTT_MEMCPY_USE_BYTELOOP - pDst = (pRing->pBuffer + WrOff) + SEGGER_RTT_UNCACHED_OFF; - NumBytesAtOnce = Rem; - while (NumBytesAtOnce--) { - *pDst++ = *pData++; - }; - pDst = pRing->pBuffer + SEGGER_RTT_UNCACHED_OFF; - NumBytesAtOnce = NumBytes - Rem; - while (NumBytesAtOnce--) { - *pDst++ = *pData++; - }; - RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses - pRing->WrOff = NumBytes - Rem; -#else - NumBytesAtOnce = Rem; - pDst = (pRing->pBuffer + WrOff) + SEGGER_RTT_UNCACHED_OFF; - SEGGER_RTT_MEMCPY((void*)pDst, pData, NumBytesAtOnce); - NumBytesAtOnce = NumBytes - Rem; - pDst = pRing->pBuffer + SEGGER_RTT_UNCACHED_OFF; - SEGGER_RTT_MEMCPY((void*)pDst, pData + Rem, NumBytesAtOnce); - RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses - pRing->WrOff = NumBytesAtOnce; -#endif - } -} - -/********************************************************************* -* -* _PostTerminalSwitch() -* -* Function description -* Switch terminal to the given terminal ID. It is the caller's -* responsibility to ensure the terminal ID is correct and there is -* enough space in the buffer for this to complete successfully. -* -* Parameters -* pRing Ring buffer to post to. -* TerminalId Terminal ID to switch to. -*/ -static void _PostTerminalSwitch(SEGGER_RTT_BUFFER_UP* pRing, unsigned char TerminalId) { - unsigned char ac[2]; - - ac[0] = 0xFFu; - ac[1] = _aTerminalId[TerminalId]; // Caller made already sure that TerminalId does not exceed our terminal limit - _WriteBlocking(pRing, (const char*)ac, 2u); -} - -/********************************************************************* -* -* _GetAvailWriteSpace() -* -* Function description -* Returns the number of bytes that can be written to the ring -* buffer without blocking. -* -* Parameters -* pRing Ring buffer to check. -* -* Return value -* Number of bytes that are free in the buffer. -*/ -static unsigned _GetAvailWriteSpace(SEGGER_RTT_BUFFER_UP* pRing) { - unsigned RdOff; - unsigned WrOff; - unsigned r; - // - // Avoid warnings regarding volatile access order. It's not a problem - // in this case, but dampen compiler enthusiasm. - // - RdOff = pRing->RdOff; - WrOff = pRing->WrOff; - if (RdOff <= WrOff) { - r = pRing->SizeOfBuffer - 1u - WrOff + RdOff; - } else { - r = RdOff - WrOff - 1u; - } - return r; -} - -/********************************************************************* -* -* Public code -* -********************************************************************** -*/ - -/********************************************************************* -* -* SEGGER_RTT_ReadUpBufferNoLock() -* -* Function description -* Reads characters from SEGGER real-time-terminal control block -* which have been previously stored by the application. -* Do not lock against interrupts and multiple access. -* Used to do the same operation that J-Link does, to transfer -* RTT data via other channels, such as TCP/IP or UART. -* -* Parameters -* BufferIndex Index of Up-buffer to be used. -* pBuffer Pointer to buffer provided by target application, to copy characters from RTT-up-buffer to. -* BufferSize Size of the target application buffer. -* -* Return value -* Number of bytes that have been read. -* -* Additional information -* This function must not be called when J-Link might also do RTT. -*/ -unsigned SEGGER_RTT_ReadUpBufferNoLock(unsigned BufferIndex, void* pData, unsigned BufferSize) { - unsigned NumBytesRem; - unsigned NumBytesRead; - unsigned RdOff; - unsigned WrOff; - unsigned char* pBuffer; - SEGGER_RTT_BUFFER_UP* pRing; - volatile char* pSrc; - - INIT(); - pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly - pBuffer = (unsigned char*)pData; - RdOff = pRing->RdOff; - WrOff = pRing->WrOff; - NumBytesRead = 0u; - // - // Read from current read position to wrap-around of buffer, first - // - if (RdOff > WrOff) { - NumBytesRem = pRing->SizeOfBuffer - RdOff; - NumBytesRem = MIN(NumBytesRem, BufferSize); - pSrc = (pRing->pBuffer + RdOff) + SEGGER_RTT_UNCACHED_OFF; -#if SEGGER_RTT_MEMCPY_USE_BYTELOOP - NumBytesRead += NumBytesRem; - BufferSize -= NumBytesRem; - RdOff += NumBytesRem; - while (NumBytesRem--) { - *pBuffer++ = *pSrc++; - }; -#else - SEGGER_RTT_MEMCPY(pBuffer, (void*)pSrc, NumBytesRem); - NumBytesRead += NumBytesRem; - pBuffer += NumBytesRem; - BufferSize -= NumBytesRem; - RdOff += NumBytesRem; -#endif - // - // Handle wrap-around of buffer - // - if (RdOff == pRing->SizeOfBuffer) { - RdOff = 0u; - } - } - // - // Read remaining items of buffer - // - NumBytesRem = WrOff - RdOff; - NumBytesRem = MIN(NumBytesRem, BufferSize); - if (NumBytesRem > 0u) { - pSrc = (pRing->pBuffer + RdOff) + SEGGER_RTT_UNCACHED_OFF; -#if SEGGER_RTT_MEMCPY_USE_BYTELOOP - NumBytesRead += NumBytesRem; - BufferSize -= NumBytesRem; - RdOff += NumBytesRem; - while (NumBytesRem--) { - *pBuffer++ = *pSrc++; - }; -#else - SEGGER_RTT_MEMCPY(pBuffer, (void*)pSrc, NumBytesRem); - NumBytesRead += NumBytesRem; - pBuffer += NumBytesRem; - BufferSize -= NumBytesRem; - RdOff += NumBytesRem; -#endif - } - // - // Update read offset of buffer - // - if (NumBytesRead) { - pRing->RdOff = RdOff; - } - // - return NumBytesRead; -} - -/********************************************************************* -* -* SEGGER_RTT_ReadNoLock() -* -* Function description -* Reads characters from SEGGER real-time-terminal control block -* which have been previously stored by the host. -* Do not lock against interrupts and multiple access. -* -* Parameters -* BufferIndex Index of Down-buffer to be used (e.g. 0 for "Terminal"). -* pBuffer Pointer to buffer provided by target application, to copy characters from RTT-down-buffer to. -* BufferSize Size of the target application buffer. -* -* Return value -* Number of bytes that have been read. -*/ -unsigned SEGGER_RTT_ReadNoLock(unsigned BufferIndex, void* pData, unsigned BufferSize) { - unsigned NumBytesRem; - unsigned NumBytesRead; - unsigned RdOff; - unsigned WrOff; - unsigned char* pBuffer; - SEGGER_RTT_BUFFER_DOWN* pRing; - volatile char* pSrc; - // - INIT(); - pRing = (SEGGER_RTT_BUFFER_DOWN*)((char*)&_SEGGER_RTT.aDown[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly - pBuffer = (unsigned char*)pData; - RdOff = pRing->RdOff; - WrOff = pRing->WrOff; - NumBytesRead = 0u; - // - // Read from current read position to wrap-around of buffer, first - // - if (RdOff > WrOff) { - NumBytesRem = pRing->SizeOfBuffer - RdOff; - NumBytesRem = MIN(NumBytesRem, BufferSize); - pSrc = (pRing->pBuffer + RdOff) + SEGGER_RTT_UNCACHED_OFF; -#if SEGGER_RTT_MEMCPY_USE_BYTELOOP - NumBytesRead += NumBytesRem; - BufferSize -= NumBytesRem; - RdOff += NumBytesRem; - while (NumBytesRem--) { - *pBuffer++ = *pSrc++; - }; -#else - SEGGER_RTT_MEMCPY(pBuffer, (void*)pSrc, NumBytesRem); - NumBytesRead += NumBytesRem; - pBuffer += NumBytesRem; - BufferSize -= NumBytesRem; - RdOff += NumBytesRem; -#endif - // - // Handle wrap-around of buffer - // - if (RdOff == pRing->SizeOfBuffer) { - RdOff = 0u; - } - } - // - // Read remaining items of buffer - // - NumBytesRem = WrOff - RdOff; - NumBytesRem = MIN(NumBytesRem, BufferSize); - if (NumBytesRem > 0u) { - pSrc = (pRing->pBuffer + RdOff) + SEGGER_RTT_UNCACHED_OFF; -#if SEGGER_RTT_MEMCPY_USE_BYTELOOP - NumBytesRead += NumBytesRem; - BufferSize -= NumBytesRem; - RdOff += NumBytesRem; - while (NumBytesRem--) { - *pBuffer++ = *pSrc++; - }; -#else - SEGGER_RTT_MEMCPY(pBuffer, (void*)pSrc, NumBytesRem); - NumBytesRead += NumBytesRem; - pBuffer += NumBytesRem; - BufferSize -= NumBytesRem; - RdOff += NumBytesRem; -#endif - } - if (NumBytesRead) { - pRing->RdOff = RdOff; - } - // - return NumBytesRead; -} - -/********************************************************************* -* -* SEGGER_RTT_ReadUpBuffer -* -* Function description -* Reads characters from SEGGER real-time-terminal control block -* which have been previously stored by the application. -* Used to do the same operation that J-Link does, to transfer -* RTT data via other channels, such as TCP/IP or UART. -* -* Parameters -* BufferIndex Index of Up-buffer to be used. -* pBuffer Pointer to buffer provided by target application, to copy characters from RTT-up-buffer to. -* BufferSize Size of the target application buffer. -* -* Return value -* Number of bytes that have been read. -* -* Additional information -* This function must not be called when J-Link might also do RTT. -* This function locks against all other RTT operations. I.e. during -* the read operation, writing is also locked. -* If only one consumer reads from the up buffer, -* call sEGGER_RTT_ReadUpBufferNoLock() instead. -*/ -unsigned SEGGER_RTT_ReadUpBuffer(unsigned BufferIndex, void* pBuffer, unsigned BufferSize) { - unsigned NumBytesRead; - - SEGGER_RTT_LOCK(); - // - // Call the non-locking read function - // - NumBytesRead = SEGGER_RTT_ReadUpBufferNoLock(BufferIndex, pBuffer, BufferSize); - // - // Finish up. - // - SEGGER_RTT_UNLOCK(); - // - return NumBytesRead; -} - -/********************************************************************* -* -* SEGGER_RTT_Read -* -* Function description -* Reads characters from SEGGER real-time-terminal control block -* which have been previously stored by the host. -* -* Parameters -* BufferIndex Index of Down-buffer to be used (e.g. 0 for "Terminal"). -* pBuffer Pointer to buffer provided by target application, to copy characters from RTT-down-buffer to. -* BufferSize Size of the target application buffer. -* -* Return value -* Number of bytes that have been read. -*/ -unsigned SEGGER_RTT_Read(unsigned BufferIndex, void* pBuffer, unsigned BufferSize) { - unsigned NumBytesRead; - - SEGGER_RTT_LOCK(); - // - // Call the non-locking read function - // - NumBytesRead = SEGGER_RTT_ReadNoLock(BufferIndex, pBuffer, BufferSize); - // - // Finish up. - // - SEGGER_RTT_UNLOCK(); - // - return NumBytesRead; -} - -/********************************************************************* -* -* SEGGER_RTT_WriteWithOverwriteNoLock -* -* Function description -* Stores a specified number of characters in SEGGER RTT -* control block. -* SEGGER_RTT_WriteWithOverwriteNoLock does not lock the application -* and overwrites data if the data does not fit into the buffer. -* -* Parameters -* BufferIndex Index of "Up"-buffer to be used (e.g. 0 for "Terminal"). -* pBuffer Pointer to character array. Does not need to point to a \0 terminated string. -* NumBytes Number of bytes to be stored in the SEGGER RTT control block. -* -* Notes -* (1) If there is not enough space in the "Up"-buffer, data is overwritten. -* (2) For performance reasons this function does not call Init() -* and may only be called after RTT has been initialized. -* Either by calling SEGGER_RTT_Init() or calling another RTT API function first. -* (3) Do not use SEGGER_RTT_WriteWithOverwriteNoLock if a J-Link -* connection reads RTT data. -*/ -void SEGGER_RTT_WriteWithOverwriteNoLock(unsigned BufferIndex, const void* pBuffer, unsigned NumBytes) { - const char* pData; - SEGGER_RTT_BUFFER_UP* pRing; - unsigned Avail; - volatile char* pDst; - // - // Get "to-host" ring buffer and copy some elements into local variables. - // - pData = (const char *)pBuffer; - pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly - // - // Check if we will overwrite data and need to adjust the RdOff. - // - if (pRing->WrOff == pRing->RdOff) { - Avail = pRing->SizeOfBuffer - 1u; - } else if ( pRing->WrOff < pRing->RdOff) { - Avail = pRing->RdOff - pRing->WrOff - 1u; - } else { - Avail = pRing->RdOff - pRing->WrOff - 1u + pRing->SizeOfBuffer; - } - if (NumBytes > Avail) { - pRing->RdOff += (NumBytes - Avail); - while (pRing->RdOff >= pRing->SizeOfBuffer) { - pRing->RdOff -= pRing->SizeOfBuffer; - } - } - // - // Write all data, no need to check the RdOff, but possibly handle multiple wrap-arounds - // - Avail = pRing->SizeOfBuffer - pRing->WrOff; - do { - if (Avail > NumBytes) { - // - // Last round - // - pDst = (pRing->pBuffer + pRing->WrOff) + SEGGER_RTT_UNCACHED_OFF; -#if SEGGER_RTT_MEMCPY_USE_BYTELOOP - Avail = NumBytes; - while (NumBytes--) { - *pDst++ = *pData++; - }; - RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses - pRing->WrOff += Avail; -#else - SEGGER_RTT_MEMCPY((void*)pDst, pData, NumBytes); - RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses - pRing->WrOff += NumBytes; -#endif - break; - } else { - // - // Wrap-around necessary, write until wrap-around and reset WrOff - // - pDst = (pRing->pBuffer + pRing->WrOff) + SEGGER_RTT_UNCACHED_OFF; -#if SEGGER_RTT_MEMCPY_USE_BYTELOOP - NumBytes -= Avail; - while (Avail--) { - *pDst++ = *pData++; - }; - RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses - pRing->WrOff = 0; -#else - SEGGER_RTT_MEMCPY((void*)pDst, pData, Avail); - pData += Avail; - RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses - pRing->WrOff = 0; - NumBytes -= Avail; -#endif - Avail = (pRing->SizeOfBuffer - 1); - } - } while (NumBytes); -} - -/********************************************************************* -* -* SEGGER_RTT_WriteSkipNoLock -* -* Function description -* Stores a specified number of characters in SEGGER RTT -* control block which is then read by the host. -* SEGGER_RTT_WriteSkipNoLock does not lock the application and -* skips all data, if the data does not fit into the buffer. -* -* Parameters -* BufferIndex Index of "Up"-buffer to be used (e.g. 0 for "Terminal"). -* pBuffer Pointer to character array. Does not need to point to a \0 terminated string. -* NumBytes Number of bytes to be stored in the SEGGER RTT control block. -* MUST be > 0!!! -* This is done for performance reasons, so no initial check has do be done. -* -* Return value -* 1: Data has been copied -* 0: No space, data has not been copied -* -* Notes -* (1) If there is not enough space in the "Up"-buffer, all data is dropped. -* (2) For performance reasons this function does not call Init() -* and may only be called after RTT has been initialized. -* Either by calling SEGGER_RTT_Init() or calling another RTT API function first. -*/ -#if (RTT_USE_ASM == 0) -unsigned SEGGER_RTT_WriteSkipNoLock(unsigned BufferIndex, const void* pBuffer, unsigned NumBytes) { - const char* pData; - SEGGER_RTT_BUFFER_UP* pRing; - unsigned Avail; - unsigned RdOff; - unsigned WrOff; - unsigned Rem; - volatile char* pDst; - // - // Cases: - // 1) RdOff <= WrOff => Space until wrap-around is sufficient - // 2) RdOff <= WrOff => Space after wrap-around needed (copy in 2 chunks) - // 3) RdOff < WrOff => No space in buf - // 4) RdOff > WrOff => Space is sufficient - // 5) RdOff > WrOff => No space in buf - // - // 1) is the most common case for large buffers and assuming that J-Link reads the data fast enough - // - pData = (const char *)pBuffer; - pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly - RdOff = pRing->RdOff; - WrOff = pRing->WrOff; - if (RdOff <= WrOff) { // Case 1), 2) or 3) - Avail = pRing->SizeOfBuffer - WrOff - 1u; // Space until wrap-around (assume 1 byte not usable for case that RdOff == 0) - if (Avail >= NumBytes) { // Case 1)? -CopyStraight: - pDst = (pRing->pBuffer + WrOff) + SEGGER_RTT_UNCACHED_OFF; - memcpy((void*)pDst, pData, NumBytes); - RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses - pRing->WrOff = WrOff + NumBytes; - return 1; - } - Avail += RdOff; // Space incl. wrap-around - if (Avail >= NumBytes) { // Case 2? => If not, we have case 3) (does not fit) - Rem = pRing->SizeOfBuffer - WrOff; // Space until end of buffer - pDst = (pRing->pBuffer + WrOff) + SEGGER_RTT_UNCACHED_OFF; - memcpy((void*)pDst, pData, Rem); // Copy 1st chunk - NumBytes -= Rem; - // - // Special case: First check that assumed RdOff == 0 calculated that last element before wrap-around could not be used - // But 2nd check (considering space until wrap-around and until RdOff) revealed that RdOff is not 0, so we can use the last element - // In this case, we may use a copy straight until buffer end anyway without needing to copy 2 chunks - // Therefore, check if 2nd memcpy is necessary at all - // - if (NumBytes) { - pDst = pRing->pBuffer + SEGGER_RTT_UNCACHED_OFF; - memcpy((void*)pDst, pData + Rem, NumBytes); - } - RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses - pRing->WrOff = NumBytes; - return 1; - } - } else { // Potential case 4) - Avail = RdOff - WrOff - 1u; - if (Avail >= NumBytes) { // Case 4)? => If not, we have case 5) (does not fit) - goto CopyStraight; - } - } - return 0; // No space in buffer -} -#endif - -/********************************************************************* -* -* SEGGER_RTT_WriteDownBufferNoLock -* -* Function description -* Stores a specified number of characters in SEGGER RTT -* control block inside a buffer. -* SEGGER_RTT_WriteDownBufferNoLock does not lock the application. -* Used to do the same operation that J-Link does, to transfer -* RTT data from other channels, such as TCP/IP or UART. -* -* Parameters -* BufferIndex Index of "Down"-buffer to be used. -* pBuffer Pointer to character array. Does not need to point to a \0 terminated string. -* NumBytes Number of bytes to be stored in the SEGGER RTT control block. -* -* Return value -* Number of bytes which have been stored in the "Down"-buffer. -* -* Notes -* (1) Data is stored according to buffer flags. -* (2) For performance reasons this function does not call Init() -* and may only be called after RTT has been initialized. -* Either by calling SEGGER_RTT_Init() or calling another RTT API function first. -* -* Additional information -* This function must not be called when J-Link might also do RTT. -*/ -unsigned SEGGER_RTT_WriteDownBufferNoLock(unsigned BufferIndex, const void* pBuffer, unsigned NumBytes) { - unsigned Status; - unsigned Avail; - const char* pData; - SEGGER_RTT_BUFFER_UP* pRing; - // - // Get "to-target" ring buffer. - // It is save to cast that to a "to-host" buffer. Up and Down buffer differ in volatility of offsets that might be modified by J-Link. - // - pData = (const char *)pBuffer; - pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aDown[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly - // - // How we output depends upon the mode... - // - switch (pRing->Flags) { - case SEGGER_RTT_MODE_NO_BLOCK_SKIP: - // - // If we are in skip mode and there is no space for the whole - // of this output, don't bother. - // - Avail = _GetAvailWriteSpace(pRing); - if (Avail < NumBytes) { - Status = 0u; - } else { - Status = NumBytes; - _WriteNoCheck(pRing, pData, NumBytes); - } - break; - case SEGGER_RTT_MODE_NO_BLOCK_TRIM: - // - // If we are in trim mode, trim to what we can output without blocking. - // - Avail = _GetAvailWriteSpace(pRing); - Status = Avail < NumBytes ? Avail : NumBytes; - _WriteNoCheck(pRing, pData, Status); - break; - case SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL: - // - // If we are in blocking mode, output everything. - // - Status = _WriteBlocking(pRing, pData, NumBytes); - break; - default: - Status = 0u; - break; - } - // - // Finish up. - // - return Status; -} - -/********************************************************************* -* -* SEGGER_RTT_WriteNoLock -* -* Function description -* Stores a specified number of characters in SEGGER RTT -* control block which is then read by the host. -* SEGGER_RTT_WriteNoLock does not lock the application. -* -* Parameters -* BufferIndex Index of "Up"-buffer to be used (e.g. 0 for "Terminal"). -* pBuffer Pointer to character array. Does not need to point to a \0 terminated string. -* NumBytes Number of bytes to be stored in the SEGGER RTT control block. -* -* Return value -* Number of bytes which have been stored in the "Up"-buffer. -* -* Notes -* (1) Data is stored according to buffer flags. -* (2) For performance reasons this function does not call Init() -* and may only be called after RTT has been initialized. -* Either by calling SEGGER_RTT_Init() or calling another RTT API function first. -*/ -unsigned SEGGER_RTT_WriteNoLock(unsigned BufferIndex, const void* pBuffer, unsigned NumBytes) { - unsigned Status; - unsigned Avail; - const char* pData; - SEGGER_RTT_BUFFER_UP* pRing; - // - // Get "to-host" ring buffer. - // - pData = (const char *)pBuffer; - pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly - // - // How we output depends upon the mode... - // - switch (pRing->Flags) { - case SEGGER_RTT_MODE_NO_BLOCK_SKIP: - // - // If we are in skip mode and there is no space for the whole - // of this output, don't bother. - // - Avail = _GetAvailWriteSpace(pRing); - if (Avail < NumBytes) { - Status = 0u; - } else { - Status = NumBytes; - _WriteNoCheck(pRing, pData, NumBytes); - } - break; - case SEGGER_RTT_MODE_NO_BLOCK_TRIM: - // - // If we are in trim mode, trim to what we can output without blocking. - // - Avail = _GetAvailWriteSpace(pRing); - Status = Avail < NumBytes ? Avail : NumBytes; - _WriteNoCheck(pRing, pData, Status); - break; - case SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL: - // - // If we are in blocking mode, output everything. - // - Status = _WriteBlocking(pRing, pData, NumBytes); - break; - default: - Status = 0u; - break; - } - // - // Finish up. - // - return Status; -} - -/********************************************************************* -* -* SEGGER_RTT_WriteDownBuffer -* -* Function description -* Stores a specified number of characters in SEGGER RTT control block in a buffer. -* -* Parameters -* BufferIndex Index of "Up"-buffer to be used (e.g. 0 for "Terminal"). -* pBuffer Pointer to character array. Does not need to point to a \0 terminated string. -* NumBytes Number of bytes to be stored in the SEGGER RTT control block. -* -* Return value -* Number of bytes which have been stored in the "Down"-buffer. -* -* Notes -* (1) Data is stored according to buffer flags. -* -* Additional information -* This function must not be called when J-Link might also do RTT. -* This function locks against all other RTT operations. I.e. during -* the write operation, writing from the application is also locked. -* If only one consumer writes to the down buffer, -* call SEGGER_RTT_WriteDownBufferNoLock() instead. -*/ -unsigned SEGGER_RTT_WriteDownBuffer(unsigned BufferIndex, const void* pBuffer, unsigned NumBytes) { - unsigned Status; - - INIT(); - SEGGER_RTT_LOCK(); - Status = SEGGER_RTT_WriteDownBufferNoLock(BufferIndex, pBuffer, NumBytes); // Call the non-locking write function - SEGGER_RTT_UNLOCK(); - return Status; -} - -/********************************************************************* -* -* SEGGER_RTT_Write -* -* Function description -* Stores a specified number of characters in SEGGER RTT -* control block which is then read by the host. -* -* Parameters -* BufferIndex Index of "Up"-buffer to be used (e.g. 0 for "Terminal"). -* pBuffer Pointer to character array. Does not need to point to a \0 terminated string. -* NumBytes Number of bytes to be stored in the SEGGER RTT control block. -* -* Return value -* Number of bytes which have been stored in the "Up"-buffer. -* -* Notes -* (1) Data is stored according to buffer flags. -*/ -unsigned SEGGER_RTT_Write(unsigned BufferIndex, const void* pBuffer, unsigned NumBytes) { - unsigned Status; - - INIT(); - SEGGER_RTT_LOCK(); - Status = SEGGER_RTT_WriteNoLock(BufferIndex, pBuffer, NumBytes); // Call the non-locking write function - SEGGER_RTT_UNLOCK(); - return Status; -} - -/********************************************************************* -* -* SEGGER_RTT_WriteString -* -* Function description -* Stores string in SEGGER RTT control block. -* This data is read by the host. -* -* Parameters -* BufferIndex Index of "Up"-buffer to be used (e.g. 0 for "Terminal"). -* s Pointer to string. -* -* Return value -* Number of bytes which have been stored in the "Up"-buffer. -* -* Notes -* (1) Data is stored according to buffer flags. -* (2) String passed to this function has to be \0 terminated -* (3) \0 termination character is *not* stored in RTT buffer -*/ -unsigned SEGGER_RTT_WriteString(unsigned BufferIndex, const char* s) { - unsigned Len; - - Len = STRLEN(s); - return SEGGER_RTT_Write(BufferIndex, s, Len); -} - -/********************************************************************* -* -* SEGGER_RTT_PutCharSkipNoLock -* -* Function description -* Stores a single character/byte in SEGGER RTT buffer. -* SEGGER_RTT_PutCharSkipNoLock does not lock the application and -* skips the byte, if it does not fit into the buffer. -* -* Parameters -* BufferIndex Index of "Up"-buffer to be used (e.g. 0 for "Terminal"). -* c Byte to be stored. -* -* Return value -* Number of bytes which have been stored in the "Up"-buffer. -* -* Notes -* (1) If there is not enough space in the "Up"-buffer, the character is dropped. -* (2) For performance reasons this function does not call Init() -* and may only be called after RTT has been initialized. -* Either by calling SEGGER_RTT_Init() or calling another RTT API function first. -*/ - -unsigned SEGGER_RTT_PutCharSkipNoLock(unsigned BufferIndex, char c) { - SEGGER_RTT_BUFFER_UP* pRing; - unsigned WrOff; - unsigned Status; - volatile char* pDst; - // - // Get "to-host" ring buffer. - // - pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly - // - // Get write position and handle wrap-around if necessary - // - WrOff = pRing->WrOff + 1; - if (WrOff == pRing->SizeOfBuffer) { - WrOff = 0; - } - // - // Output byte if free space is available - // - if (WrOff != pRing->RdOff) { - pDst = (pRing->pBuffer + pRing->WrOff) + SEGGER_RTT_UNCACHED_OFF; - *pDst = c; - RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses - pRing->WrOff = WrOff; - Status = 1; - } else { - Status = 0; - } - // - return Status; -} - -/********************************************************************* -* -* SEGGER_RTT_PutCharSkip -* -* Function description -* Stores a single character/byte in SEGGER RTT buffer. -* -* Parameters -* BufferIndex Index of "Up"-buffer to be used (e.g. 0 for "Terminal"). -* c Byte to be stored. -* -* Return value -* Number of bytes which have been stored in the "Up"-buffer. -* -* Notes -* (1) If there is not enough space in the "Up"-buffer, the character is dropped. -*/ - -unsigned SEGGER_RTT_PutCharSkip(unsigned BufferIndex, char c) { - SEGGER_RTT_BUFFER_UP* pRing; - unsigned WrOff; - unsigned Status; - volatile char* pDst; - // - // Prepare - // - INIT(); - SEGGER_RTT_LOCK(); - // - // Get "to-host" ring buffer. - // - pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly - // - // Get write position and handle wrap-around if necessary - // - WrOff = pRing->WrOff + 1; - if (WrOff == pRing->SizeOfBuffer) { - WrOff = 0; - } - // - // Output byte if free space is available - // - if (WrOff != pRing->RdOff) { - pDst = (pRing->pBuffer + pRing->WrOff) + SEGGER_RTT_UNCACHED_OFF; - *pDst = c; - RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses - pRing->WrOff = WrOff; - Status = 1; - } else { - Status = 0; - } - // - // Finish up. - // - SEGGER_RTT_UNLOCK(); - // - return Status; -} - - /********************************************************************* -* -* SEGGER_RTT_PutChar -* -* Function description -* Stores a single character/byte in SEGGER RTT buffer. -* -* Parameters -* BufferIndex Index of "Up"-buffer to be used (e.g. 0 for "Terminal"). -* c Byte to be stored. -* -* Return value -* Number of bytes which have been stored in the "Up"-buffer. -* -* Notes -* (1) Data is stored according to buffer flags. -*/ - -unsigned SEGGER_RTT_PutChar(unsigned BufferIndex, char c) { - SEGGER_RTT_BUFFER_UP* pRing; - unsigned WrOff; - unsigned Status; - volatile char* pDst; - // - // Prepare - // - INIT(); - SEGGER_RTT_LOCK(); - // - // Get "to-host" ring buffer. - // - pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly - // - // Get write position and handle wrap-around if necessary - // - WrOff = pRing->WrOff + 1; - if (WrOff == pRing->SizeOfBuffer) { - WrOff = 0; - } - // - // Wait for free space if mode is set to blocking - // - if (pRing->Flags == SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL) { - while (WrOff == pRing->RdOff) { - ; - } - } - // - // Output byte if free space is available - // - if (WrOff != pRing->RdOff) { - pDst = (pRing->pBuffer + pRing->WrOff) + SEGGER_RTT_UNCACHED_OFF; - *pDst = c; - RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses - pRing->WrOff = WrOff; - Status = 1; - } else { - Status = 0; - } - // - // Finish up. - // - SEGGER_RTT_UNLOCK(); - return Status; -} - -/********************************************************************* -* -* SEGGER_RTT_GetKey -* -* Function description -* Reads one character from the SEGGER RTT buffer. -* Host has previously stored data there. -* -* Return value -* < 0 - No character available (buffer empty). -* >= 0 - Character which has been read. (Possible values: 0 - 255) -* -* Notes -* (1) This function is only specified for accesses to RTT buffer 0. -*/ -int SEGGER_RTT_GetKey(void) { - char c; - int r; - - r = (int)SEGGER_RTT_Read(0u, &c, 1u); - if (r == 1) { - r = (int)(unsigned char)c; - } else { - r = -1; - } - return r; -} - -/********************************************************************* -* -* SEGGER_RTT_WaitKey -* -* Function description -* Waits until at least one character is avaible in the SEGGER RTT buffer. -* Once a character is available, it is read and this function returns. -* -* Return value -* >=0 - Character which has been read. -* -* Notes -* (1) This function is only specified for accesses to RTT buffer 0 -* (2) This function is blocking if no character is present in RTT buffer -*/ -int SEGGER_RTT_WaitKey(void) { - int r; - - do { - r = SEGGER_RTT_GetKey(); - } while (r < 0); - return r; -} - -/********************************************************************* -* -* SEGGER_RTT_HasKey -* -* Function description -* Checks if at least one character for reading is available in the SEGGER RTT buffer. -* -* Return value -* == 0 - No characters are available to read. -* == 1 - At least one character is available. -* -* Notes -* (1) This function is only specified for accesses to RTT buffer 0 -*/ -int SEGGER_RTT_HasKey(void) { - SEGGER_RTT_BUFFER_DOWN* pRing; - unsigned RdOff; - int r; - - INIT(); - pRing = (SEGGER_RTT_BUFFER_DOWN*)((char*)&_SEGGER_RTT.aDown[0] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly - RdOff = pRing->RdOff; - if (RdOff != pRing->WrOff) { - r = 1; - } else { - r = 0; - } - return r; -} - -/********************************************************************* -* -* SEGGER_RTT_HasData -* -* Function description -* Check if there is data from the host in the given buffer. -* -* Return value: -* ==0: No data -* !=0: Data in buffer -* -*/ -unsigned SEGGER_RTT_HasData(unsigned BufferIndex) { - SEGGER_RTT_BUFFER_DOWN* pRing; - unsigned v; - - pRing = (SEGGER_RTT_BUFFER_DOWN*)((char*)&_SEGGER_RTT.aDown[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly - v = pRing->WrOff; - return v - pRing->RdOff; -} - -/********************************************************************* -* -* SEGGER_RTT_HasDataUp -* -* Function description -* Check if there is data remaining to be sent in the given buffer. -* -* Return value: -* ==0: No data -* !=0: Data in buffer -* -*/ -unsigned SEGGER_RTT_HasDataUp(unsigned BufferIndex) { - SEGGER_RTT_BUFFER_UP* pRing; - unsigned v; - - pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly - v = pRing->RdOff; - return pRing->WrOff - v; -} - -/********************************************************************* -* -* SEGGER_RTT_AllocDownBuffer -* -* Function description -* Run-time configuration of the next down-buffer (H->T). -* The next buffer, which is not used yet is configured. -* This includes: Buffer address, size, name, flags, ... -* -* Parameters -* sName Pointer to a constant name string. -* pBuffer Pointer to a buffer to be used. -* BufferSize Size of the buffer. -* Flags Operating modes. Define behavior if buffer is full (not enough space for entire message). -* -* Return value -* >= 0 - O.K. Buffer Index -* < 0 - Error -*/ -int SEGGER_RTT_AllocDownBuffer(const char* sName, void* pBuffer, unsigned BufferSize, unsigned Flags) { - int BufferIndex; - volatile SEGGER_RTT_CB* pRTTCB; - - INIT(); - SEGGER_RTT_LOCK(); - pRTTCB = (volatile SEGGER_RTT_CB*)((unsigned char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly - BufferIndex = 0; - do { - if (pRTTCB->aDown[BufferIndex].pBuffer == NULL) { - break; - } - BufferIndex++; - } while (BufferIndex < pRTTCB->MaxNumDownBuffers); - if (BufferIndex < pRTTCB->MaxNumDownBuffers) { - pRTTCB->aDown[BufferIndex].sName = sName; - pRTTCB->aDown[BufferIndex].pBuffer = (char*)pBuffer; - pRTTCB->aDown[BufferIndex].SizeOfBuffer = BufferSize; - pRTTCB->aDown[BufferIndex].RdOff = 0u; - pRTTCB->aDown[BufferIndex].WrOff = 0u; - pRTTCB->aDown[BufferIndex].Flags = Flags; - RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses - } else { - BufferIndex = -1; - } - SEGGER_RTT_UNLOCK(); - return BufferIndex; -} - -/********************************************************************* -* -* SEGGER_RTT_AllocUpBuffer -* -* Function description -* Run-time configuration of the next up-buffer (T->H). -* The next buffer, which is not used yet is configured. -* This includes: Buffer address, size, name, flags, ... -* -* Parameters -* sName Pointer to a constant name string. -* pBuffer Pointer to a buffer to be used. -* BufferSize Size of the buffer. -* Flags Operating modes. Define behavior if buffer is full (not enough space for entire message). -* -* Return value -* >= 0 - O.K. Buffer Index -* < 0 - Error -*/ -int SEGGER_RTT_AllocUpBuffer(const char* sName, void* pBuffer, unsigned BufferSize, unsigned Flags) { - int BufferIndex; - volatile SEGGER_RTT_CB* pRTTCB; - - INIT(); - SEGGER_RTT_LOCK(); - pRTTCB = (volatile SEGGER_RTT_CB*)((unsigned char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly - BufferIndex = 0; - do { - if (pRTTCB->aUp[BufferIndex].pBuffer == NULL) { - break; - } - BufferIndex++; - } while (BufferIndex < pRTTCB->MaxNumUpBuffers); - if (BufferIndex < pRTTCB->MaxNumUpBuffers) { - pRTTCB->aUp[BufferIndex].sName = sName; - pRTTCB->aUp[BufferIndex].pBuffer = (char*)pBuffer; - pRTTCB->aUp[BufferIndex].SizeOfBuffer = BufferSize; - pRTTCB->aUp[BufferIndex].RdOff = 0u; - pRTTCB->aUp[BufferIndex].WrOff = 0u; - pRTTCB->aUp[BufferIndex].Flags = Flags; - RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses - } else { - BufferIndex = -1; - } - SEGGER_RTT_UNLOCK(); - return BufferIndex; -} - -/********************************************************************* -* -* SEGGER_RTT_ConfigUpBuffer -* -* Function description -* Run-time configuration of a specific up-buffer (T->H). -* Buffer to be configured is specified by index. -* This includes: Buffer address, size, name, flags, ... -* -* Parameters -* BufferIndex Index of the buffer to configure. -* sName Pointer to a constant name string. -* pBuffer Pointer to a buffer to be used. -* BufferSize Size of the buffer. -* Flags Operating modes. Define behavior if buffer is full (not enough space for entire message). -* -* Return value -* >= 0 - O.K. -* < 0 - Error -* -* Additional information -* Buffer 0 is configured on compile-time. -* May only be called once per buffer. -* Buffer name and flags can be reconfigured using the appropriate functions. -*/ -int SEGGER_RTT_ConfigUpBuffer(unsigned BufferIndex, const char* sName, void* pBuffer, unsigned BufferSize, unsigned Flags) { - int r; - volatile SEGGER_RTT_CB* pRTTCB; - - INIT(); - pRTTCB = (volatile SEGGER_RTT_CB*)((unsigned char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly - if (BufferIndex < (unsigned)pRTTCB->MaxNumUpBuffers) { - SEGGER_RTT_LOCK(); - if (BufferIndex > 0u) { - pRTTCB->aUp[BufferIndex].sName = sName; - pRTTCB->aUp[BufferIndex].pBuffer = (char*)pBuffer; - pRTTCB->aUp[BufferIndex].SizeOfBuffer = BufferSize; - pRTTCB->aUp[BufferIndex].RdOff = 0u; - pRTTCB->aUp[BufferIndex].WrOff = 0u; - } - pRTTCB->aUp[BufferIndex].Flags = Flags; - SEGGER_RTT_UNLOCK(); - r = 0; - } else { - r = -1; - } - return r; -} - -/********************************************************************* -* -* SEGGER_RTT_ConfigDownBuffer -* -* Function description -* Run-time configuration of a specific down-buffer (H->T). -* Buffer to be configured is specified by index. -* This includes: Buffer address, size, name, flags, ... -* -* Parameters -* BufferIndex Index of the buffer to configure. -* sName Pointer to a constant name string. -* pBuffer Pointer to a buffer to be used. -* BufferSize Size of the buffer. -* Flags Operating modes. Define behavior if buffer is full (not enough space for entire message). -* -* Return value -* >= 0 O.K. -* < 0 Error -* -* Additional information -* Buffer 0 is configured on compile-time. -* May only be called once per buffer. -* Buffer name and flags can be reconfigured using the appropriate functions. -*/ -int SEGGER_RTT_ConfigDownBuffer(unsigned BufferIndex, const char* sName, void* pBuffer, unsigned BufferSize, unsigned Flags) { - int r; - volatile SEGGER_RTT_CB* pRTTCB; - - INIT(); - pRTTCB = (volatile SEGGER_RTT_CB*)((unsigned char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly - if (BufferIndex < (unsigned)pRTTCB->MaxNumDownBuffers) { - SEGGER_RTT_LOCK(); - if (BufferIndex > 0u) { - pRTTCB->aDown[BufferIndex].sName = sName; - pRTTCB->aDown[BufferIndex].pBuffer = (char*)pBuffer; - pRTTCB->aDown[BufferIndex].SizeOfBuffer = BufferSize; - pRTTCB->aDown[BufferIndex].RdOff = 0u; - pRTTCB->aDown[BufferIndex].WrOff = 0u; - } - pRTTCB->aDown[BufferIndex].Flags = Flags; - RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses - SEGGER_RTT_UNLOCK(); - r = 0; - } else { - r = -1; - } - return r; -} - -/********************************************************************* -* -* SEGGER_RTT_SetNameUpBuffer -* -* Function description -* Run-time configuration of a specific up-buffer name (T->H). -* Buffer to be configured is specified by index. -* -* Parameters -* BufferIndex Index of the buffer to renamed. -* sName Pointer to a constant name string. -* -* Return value -* >= 0 O.K. -* < 0 Error -*/ -int SEGGER_RTT_SetNameUpBuffer(unsigned BufferIndex, const char* sName) { - int r; - volatile SEGGER_RTT_CB* pRTTCB; - - INIT(); - pRTTCB = (volatile SEGGER_RTT_CB*)((unsigned char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly - if (BufferIndex < (unsigned)pRTTCB->MaxNumUpBuffers) { - SEGGER_RTT_LOCK(); - pRTTCB->aUp[BufferIndex].sName = sName; - SEGGER_RTT_UNLOCK(); - r = 0; - } else { - r = -1; - } - return r; -} - -/********************************************************************* -* -* SEGGER_RTT_SetNameDownBuffer -* -* Function description -* Run-time configuration of a specific Down-buffer name (T->H). -* Buffer to be configured is specified by index. -* -* Parameters -* BufferIndex Index of the buffer to renamed. -* sName Pointer to a constant name string. -* -* Return value -* >= 0 O.K. -* < 0 Error -*/ -int SEGGER_RTT_SetNameDownBuffer(unsigned BufferIndex, const char* sName) { - int r; - volatile SEGGER_RTT_CB* pRTTCB; - - INIT(); - pRTTCB = (volatile SEGGER_RTT_CB*)((unsigned char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly - if (BufferIndex < (unsigned)pRTTCB->MaxNumDownBuffers) { - SEGGER_RTT_LOCK(); - pRTTCB->aDown[BufferIndex].sName = sName; - SEGGER_RTT_UNLOCK(); - r = 0; - } else { - r = -1; - } - return r; -} - -/********************************************************************* -* -* SEGGER_RTT_SetFlagsUpBuffer -* -* Function description -* Run-time configuration of specific up-buffer flags (T->H). -* Buffer to be configured is specified by index. -* -* Parameters -* BufferIndex Index of the buffer. -* Flags Flags to set for the buffer. -* -* Return value -* >= 0 O.K. -* < 0 Error -*/ -int SEGGER_RTT_SetFlagsUpBuffer(unsigned BufferIndex, unsigned Flags) { - int r; - volatile SEGGER_RTT_CB* pRTTCB; - - INIT(); - pRTTCB = (volatile SEGGER_RTT_CB*)((unsigned char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly - if (BufferIndex < (unsigned)pRTTCB->MaxNumUpBuffers) { - SEGGER_RTT_LOCK(); - pRTTCB->aUp[BufferIndex].Flags = Flags; - SEGGER_RTT_UNLOCK(); - r = 0; - } else { - r = -1; - } - return r; -} - -/********************************************************************* -* -* SEGGER_RTT_SetFlagsDownBuffer -* -* Function description -* Run-time configuration of specific Down-buffer flags (T->H). -* Buffer to be configured is specified by index. -* -* Parameters -* BufferIndex Index of the buffer to renamed. -* Flags Flags to set for the buffer. -* -* Return value -* >= 0 O.K. -* < 0 Error -*/ -int SEGGER_RTT_SetFlagsDownBuffer(unsigned BufferIndex, unsigned Flags) { - int r; - volatile SEGGER_RTT_CB* pRTTCB; - - INIT(); - pRTTCB = (volatile SEGGER_RTT_CB*)((unsigned char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly - if (BufferIndex < (unsigned)pRTTCB->MaxNumDownBuffers) { - SEGGER_RTT_LOCK(); - pRTTCB->aDown[BufferIndex].Flags = Flags; - SEGGER_RTT_UNLOCK(); - r = 0; - } else { - r = -1; - } - return r; -} - -/********************************************************************* -* -* SEGGER_RTT_Init -* -* Function description -* Initializes the RTT Control Block. -* Should be used in RAM targets, at start of the application. -* -*/ -void SEGGER_RTT_Init (void) { - _DoInit(); -} - -/********************************************************************* -* -* SEGGER_RTT_SetTerminal -* -* Function description -* Sets the terminal to be used for output on channel 0. -* -* Parameters -* TerminalId Index of the terminal. -* -* Return value -* >= 0 O.K. -* < 0 Error (e.g. if RTT is configured for non-blocking mode and there was no space in the buffer to set the new terminal Id) -* -* Notes -* (1) Buffer 0 is always reserved for terminal I/O, so we can use index 0 here, fixed -*/ -int SEGGER_RTT_SetTerminal (unsigned char TerminalId) { - unsigned char ac[2]; - SEGGER_RTT_BUFFER_UP* pRing; - unsigned Avail; - int r; - - INIT(); - r = 0; - ac[0] = 0xFFu; - if (TerminalId < sizeof(_aTerminalId)) { // We only support a certain number of channels - ac[1] = _aTerminalId[TerminalId]; - pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[0] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly - SEGGER_RTT_LOCK(); // Lock to make sure that no other task is writing into buffer, while we are and number of free bytes in buffer does not change downwards after checking and before writing - if ((pRing->Flags & SEGGER_RTT_MODE_MASK) == SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL) { - _ActiveTerminal = TerminalId; - _WriteBlocking(pRing, (const char*)ac, 2u); - } else { // Skipping mode or trim mode? => We cannot trim this command so handling is the same for both modes - Avail = _GetAvailWriteSpace(pRing); - if (Avail >= 2) { - _ActiveTerminal = TerminalId; // Only change active terminal in case of success - _WriteNoCheck(pRing, (const char*)ac, 2u); - } else { - r = -1; - } - } - SEGGER_RTT_UNLOCK(); - } else { - r = -1; - } - return r; -} - -/********************************************************************* -* -* SEGGER_RTT_TerminalOut -* -* Function description -* Writes a string to the given terminal -* without changing the terminal for channel 0. -* -* Parameters -* TerminalId Index of the terminal. -* s String to be printed on the terminal. -* -* Return value -* >= 0 - Number of bytes written. -* < 0 - Error. -* -*/ -int SEGGER_RTT_TerminalOut (unsigned char TerminalId, const char* s) { - int Status; - unsigned FragLen; - unsigned Avail; - SEGGER_RTT_BUFFER_UP* pRing; - // - INIT(); - // - // Validate terminal ID. - // - if (TerminalId < (char)sizeof(_aTerminalId)) { // We only support a certain number of channels - // - // Get "to-host" ring buffer. - // - pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[0] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly - // - // Need to be able to change terminal, write data, change back. - // Compute the fixed and variable sizes. - // - FragLen = STRLEN(s); - // - // How we output depends upon the mode... - // - SEGGER_RTT_LOCK(); - Avail = _GetAvailWriteSpace(pRing); - switch (pRing->Flags & SEGGER_RTT_MODE_MASK) { - case SEGGER_RTT_MODE_NO_BLOCK_SKIP: - // - // If we are in skip mode and there is no space for the whole - // of this output, don't bother switching terminals at all. - // - if (Avail < (FragLen + 4u)) { - Status = 0; - } else { - _PostTerminalSwitch(pRing, TerminalId); - Status = (int)_WriteBlocking(pRing, s, FragLen); - _PostTerminalSwitch(pRing, _ActiveTerminal); - } - break; - case SEGGER_RTT_MODE_NO_BLOCK_TRIM: - // - // If we are in trim mode and there is not enough space for everything, - // trim the output but always include the terminal switch. If no room - // for terminal switch, skip that totally. - // - if (Avail < 4u) { - Status = -1; - } else { - _PostTerminalSwitch(pRing, TerminalId); - Status = (int)_WriteBlocking(pRing, s, (FragLen < (Avail - 4u)) ? FragLen : (Avail - 4u)); - _PostTerminalSwitch(pRing, _ActiveTerminal); - } - break; - case SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL: - // - // If we are in blocking mode, output everything. - // - _PostTerminalSwitch(pRing, TerminalId); - Status = (int)_WriteBlocking(pRing, s, FragLen); - _PostTerminalSwitch(pRing, _ActiveTerminal); - break; - default: - Status = -1; - break; - } - // - // Finish up. - // - SEGGER_RTT_UNLOCK(); - } else { - Status = -1; - } - return Status; -} - -/********************************************************************* -* -* SEGGER_RTT_GetAvailWriteSpace -* -* Function description -* Returns the number of bytes available in the ring buffer. -* -* Parameters -* BufferIndex Index of the up buffer. -* -* Return value -* Number of bytes that are free in the selected up buffer. -*/ -unsigned SEGGER_RTT_GetAvailWriteSpace (unsigned BufferIndex) { - SEGGER_RTT_BUFFER_UP* pRing; - - pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly - return _GetAvailWriteSpace(pRing); -} - - -/********************************************************************* -* -* SEGGER_RTT_GetBytesInBuffer() -* -* Function description -* Returns the number of bytes currently used in the up buffer. -* -* Parameters -* BufferIndex Index of the up buffer. -* -* Return value -* Number of bytes that are used in the buffer. -*/ -unsigned SEGGER_RTT_GetBytesInBuffer(unsigned BufferIndex) { - unsigned RdOff; - unsigned WrOff; - unsigned r; - volatile SEGGER_RTT_CB* pRTTCB; - // - // Avoid warnings regarding volatile access order. It's not a problem - // in this case, but dampen compiler enthusiasm. - // - pRTTCB = (volatile SEGGER_RTT_CB*)((unsigned char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly - RdOff = pRTTCB->aUp[BufferIndex].RdOff; - WrOff = pRTTCB->aUp[BufferIndex].WrOff; - if (RdOff <= WrOff) { - r = WrOff - RdOff; - } else { - r = pRTTCB->aUp[BufferIndex].SizeOfBuffer - (WrOff - RdOff); - } - return r; -} - -/*************************** End of file ****************************/ +/********************************************************************* +* SEGGER Microcontroller GmbH * +* The Embedded Experts * +********************************************************************** +* * +* (c) 1995 - 2019 SEGGER Microcontroller GmbH * +* * +* www.segger.com Support: support@segger.com * +* * +********************************************************************** +* * +* SEGGER SystemView * Real-time application analysis * +* * +********************************************************************** +* * +* All rights reserved. * +* * +* SEGGER strongly recommends to not make any changes * +* to or modify the source code of this software in order to stay * +* compatible with the SystemView and RTT protocol, and J-Link. * +* * +* Redistribution and use in source and binary forms, with or * +* without modification, are permitted provided that the following * +* condition is met: * +* * +* o Redistributions of source code must retain the above copyright * +* notice, this condition and the following disclaimer. * +* * +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND * +* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * +* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * +* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * +* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR * +* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * +* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * +* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * +* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * +* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE * +* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH * +* DAMAGE. * +* * +********************************************************************** +* * +* SystemView version: 3.20 * +* * +********************************************************************** +---------------------------END-OF-HEADER------------------------------ +File : SEGGER_RTT.c +Purpose : Implementation of SEGGER real-time transfer (RTT) which + allows real-time communication on targets which support + debugger memory accesses while the CPU is running. +Revision: $Rev: 20869 $ + +Additional information: + Type "int" is assumed to be 32-bits in size + H->T Host to target communication + T->H Target to host communication + + RTT channel 0 is always present and reserved for Terminal usage. + Name is fixed to "Terminal" + + Effective buffer size: SizeOfBuffer - 1 + + WrOff == RdOff: Buffer is empty + WrOff == (RdOff - 1): Buffer is full + WrOff > RdOff: Free space includes wrap-around + WrOff < RdOff: Used space includes wrap-around + (WrOff == (SizeOfBuffer - 1)) && (RdOff == 0): + Buffer full and wrap-around after next byte + + +---------------------------------------------------------------------- +*/ + +#include "SEGGER_RTT.h" + +#include // for memcpy + +/********************************************************************* +* +* Configuration, default values +* +********************************************************************** +*/ + +#if SEGGER_RTT_CPU_CACHE_LINE_SIZE + #ifdef SEGGER_RTT_CB_ALIGN + #error "Custom SEGGER_RTT_CB_ALIGN() is not supported for SEGGER_RTT_CPU_CACHE_LINE_SIZE != 0" + #endif + #ifdef SEGGER_RTT_BUFFER_ALIGN + #error "Custom SEGGER_RTT_BUFFER_ALIGN() is not supported for SEGGER_RTT_CPU_CACHE_LINE_SIZE != 0" + #endif + #ifdef SEGGER_RTT_PUT_CB_SECTION + #error "Custom SEGGER_RTT_PUT_CB_SECTION() is not supported for SEGGER_RTT_CPU_CACHE_LINE_SIZE != 0" + #endif + #ifdef SEGGER_RTT_PUT_BUFFER_SECTION + #error "Custom SEGGER_RTT_PUT_BUFFER_SECTION() is not supported for SEGGER_RTT_CPU_CACHE_LINE_SIZE != 0" + #endif + #ifdef SEGGER_RTT_BUFFER_ALIGNMENT + #error "Custom SEGGER_RTT_BUFFER_ALIGNMENT is not supported for SEGGER_RTT_CPU_CACHE_LINE_SIZE != 0" + #endif + #ifdef SEGGER_RTT_ALIGNMENT + #error "Custom SEGGER_RTT_ALIGNMENT is not supported for SEGGER_RTT_CPU_CACHE_LINE_SIZE != 0" + #endif +#endif + +#ifndef BUFFER_SIZE_UP + #define BUFFER_SIZE_UP 1024 // Size of the buffer for terminal output of target, up to host +#endif + +#ifndef BUFFER_SIZE_DOWN + #define BUFFER_SIZE_DOWN 16 // Size of the buffer for terminal input to target from host (Usually keyboard input) +#endif + +#ifndef SEGGER_RTT_MAX_NUM_UP_BUFFERS + #define SEGGER_RTT_MAX_NUM_UP_BUFFERS 2 // Number of up-buffers (T->H) available on this target +#endif + +#ifndef SEGGER_RTT_MAX_NUM_DOWN_BUFFERS + #define SEGGER_RTT_MAX_NUM_DOWN_BUFFERS 2 // Number of down-buffers (H->T) available on this target +#endif + +#ifndef SEGGER_RTT_BUFFER_SECTION + #if defined(SEGGER_RTT_SECTION) + #define SEGGER_RTT_BUFFER_SECTION SEGGER_RTT_SECTION + #endif +#endif + +#ifndef SEGGER_RTT_ALIGNMENT + #define SEGGER_RTT_ALIGNMENT SEGGER_RTT_CPU_CACHE_LINE_SIZE +#endif + +#ifndef SEGGER_RTT_BUFFER_ALIGNMENT + #define SEGGER_RTT_BUFFER_ALIGNMENT SEGGER_RTT_CPU_CACHE_LINE_SIZE +#endif + +#ifndef SEGGER_RTT_MODE_DEFAULT + #define SEGGER_RTT_MODE_DEFAULT SEGGER_RTT_MODE_NO_BLOCK_SKIP +#endif + +#ifndef SEGGER_RTT_LOCK + #define SEGGER_RTT_LOCK() +#endif + +#ifndef SEGGER_RTT_UNLOCK + #define SEGGER_RTT_UNLOCK() +#endif + +#ifndef STRLEN + #define STRLEN(a) strlen((a)) +#endif + +#ifndef STRCPY + #define STRCPY(pDest, pSrc) strcpy((pDest), (pSrc)) +#endif + +#ifndef SEGGER_RTT_MEMCPY_USE_BYTELOOP + #define SEGGER_RTT_MEMCPY_USE_BYTELOOP 0 +#endif + +#ifndef SEGGER_RTT_MEMCPY + #ifdef MEMCPY + #define SEGGER_RTT_MEMCPY(pDest, pSrc, NumBytes) MEMCPY((pDest), (pSrc), (NumBytes)) + #else + #define SEGGER_RTT_MEMCPY(pDest, pSrc, NumBytes) memcpy((pDest), (pSrc), (NumBytes)) + #endif +#endif + +#ifndef MIN + #define MIN(a, b) (((a) < (b)) ? (a) : (b)) +#endif + +#ifndef MAX + #define MAX(a, b) (((a) > (b)) ? (a) : (b)) +#endif +// +// For some environments, NULL may not be defined until certain headers are included +// +#ifndef NULL + #define NULL 0 +#endif + +/********************************************************************* +* +* Defines, fixed +* +********************************************************************** +*/ +#if (defined __ICCARM__) || (defined __ICCRX__) + #define RTT_PRAGMA(P) _Pragma(#P) +#endif + +#if SEGGER_RTT_ALIGNMENT || SEGGER_RTT_BUFFER_ALIGNMENT + #if (defined __GNUC__) + #define SEGGER_RTT_ALIGN(Var, Alignment) Var __attribute__ ((aligned (Alignment))) + #elif (defined __ICCARM__) || (defined __ICCRX__) + #define PRAGMA(A) _Pragma(#A) +#define SEGGER_RTT_ALIGN(Var, Alignment) RTT_PRAGMA(data_alignment=Alignment) \ + Var + #elif (defined __CC_ARM) + #define SEGGER_RTT_ALIGN(Var, Alignment) Var __attribute__ ((aligned (Alignment))) + #else + #error "Alignment not supported for this compiler." + #endif +#else + #define SEGGER_RTT_ALIGN(Var, Alignment) Var +#endif + +#if defined(SEGGER_RTT_SECTION) || defined (SEGGER_RTT_BUFFER_SECTION) + #if (defined __GNUC__) + #define SEGGER_RTT_PUT_SECTION(Var, Section) __attribute__ ((section (Section))) Var + #elif (defined __ICCARM__) || (defined __ICCRX__) +#define SEGGER_RTT_PUT_SECTION(Var, Section) RTT_PRAGMA(location=Section) \ + Var + #elif (defined __CC_ARM) + #define SEGGER_RTT_PUT_SECTION(Var, Section) __attribute__ ((section (Section), zero_init)) Var + #else + #error "Section placement not supported for this compiler." + #endif +#else + #define SEGGER_RTT_PUT_SECTION(Var, Section) Var +#endif + +#if SEGGER_RTT_ALIGNMENT + #define SEGGER_RTT_CB_ALIGN(Var) SEGGER_RTT_ALIGN(Var, SEGGER_RTT_ALIGNMENT) +#else + #define SEGGER_RTT_CB_ALIGN(Var) Var +#endif + +#if SEGGER_RTT_BUFFER_ALIGNMENT + #define SEGGER_RTT_BUFFER_ALIGN(Var) SEGGER_RTT_ALIGN(Var, SEGGER_RTT_BUFFER_ALIGNMENT) +#else + #define SEGGER_RTT_BUFFER_ALIGN(Var) Var +#endif + + +#if defined(SEGGER_RTT_SECTION) + #define SEGGER_RTT_PUT_CB_SECTION(Var) SEGGER_RTT_PUT_SECTION(Var, SEGGER_RTT_SECTION) +#else + #define SEGGER_RTT_PUT_CB_SECTION(Var) Var +#endif + +#if defined(SEGGER_RTT_BUFFER_SECTION) + #define SEGGER_RTT_PUT_BUFFER_SECTION(Var) SEGGER_RTT_PUT_SECTION(Var, SEGGER_RTT_BUFFER_SECTION) +#else + #define SEGGER_RTT_PUT_BUFFER_SECTION(Var) Var +#endif + +/********************************************************************* +* +* Static const data +* +********************************************************************** +*/ + +static unsigned char _aTerminalId[16] = { '0', '1', '2', '3', '4', '5', '6', '7', '8', '9', 'A', 'B', 'C', 'D', 'E', 'F' }; + +/********************************************************************* +* +* Static data +* +********************************************************************** +*/ + +// +// RTT Control Block and allocate buffers for channel 0 +// +SEGGER_RTT_PUT_CB_SECTION(SEGGER_RTT_CB_ALIGN(SEGGER_RTT_CB _SEGGER_RTT)); +SEGGER_RTT_PUT_BUFFER_SECTION(SEGGER_RTT_BUFFER_ALIGN(static char _acUpBuffer [SEGGER_RTT__ROUND_UP_2_CACHE_LINE_SIZE(BUFFER_SIZE_UP)])); +SEGGER_RTT_PUT_BUFFER_SECTION(SEGGER_RTT_BUFFER_ALIGN(static char _acDownBuffer[SEGGER_RTT__ROUND_UP_2_CACHE_LINE_SIZE(BUFFER_SIZE_DOWN)])); + +static unsigned char _ActiveTerminal; + +/********************************************************************* +* +* Static functions +* +********************************************************************** +*/ + +/********************************************************************* +* +* _DoInit() +* +* Function description +* Initializes the control block an buffers. +* May only be called via INIT() to avoid overriding settings. +* +*/ +#define INIT() { \ + volatile SEGGER_RTT_CB* pRTTCBInit; \ + pRTTCBInit = (volatile SEGGER_RTT_CB*)((char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); \ + do { \ + if (pRTTCBInit->acID[0] == '\0') { \ + _DoInit(); \ + } \ + } while (0); \ + } + +static void _DoInit(void) { + volatile SEGGER_RTT_CB* p; // Volatile to make sure that compiler cannot change the order of accesses to the control block + // + // Initialize control block + // + p = (volatile SEGGER_RTT_CB*)((char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access control block uncached so that nothing in the cache ever becomes dirty and all changes are visible in HW directly + p->MaxNumUpBuffers = SEGGER_RTT_MAX_NUM_UP_BUFFERS; + p->MaxNumDownBuffers = SEGGER_RTT_MAX_NUM_DOWN_BUFFERS; + // + // Initialize up buffer 0 + // + p->aUp[0].sName = "Terminal"; + p->aUp[0].pBuffer = _acUpBuffer; + p->aUp[0].SizeOfBuffer = BUFFER_SIZE_UP; + p->aUp[0].RdOff = 0u; + p->aUp[0].WrOff = 0u; + p->aUp[0].Flags = SEGGER_RTT_MODE_DEFAULT; + // + // Initialize down buffer 0 + // + p->aDown[0].sName = "Terminal"; + p->aDown[0].pBuffer = _acDownBuffer; + p->aDown[0].SizeOfBuffer = BUFFER_SIZE_DOWN; + p->aDown[0].RdOff = 0u; + p->aDown[0].WrOff = 0u; + p->aDown[0].Flags = SEGGER_RTT_MODE_DEFAULT; + // + // Finish initialization of the control block. + // Copy Id string in three steps to make sure "SEGGER RTT" is not found + // in initializer memory (usually flash) by J-Link + // + STRCPY((char*)&p->acID[7], "RTT"); + RTT__DMB(); // Force order of memory accessed inside core for cores that allow to change the order + STRCPY((char*)&p->acID[0], "SEGGER"); + RTT__DMB(); // Force order of memory accessed inside core for cores that allow to change the order + p->acID[6] = ' '; + RTT__DMB(); // Force order of memory accessed inside core for cores that allow to change the order +} + +/********************************************************************* +* +* _WriteBlocking() +* +* Function description +* Stores a specified number of characters in SEGGER RTT ring buffer +* and updates the associated write pointer which is periodically +* read by the host. +* The caller is responsible for managing the write chunk sizes as +* _WriteBlocking() will block until all data has been posted successfully. +* +* Parameters +* pRing Ring buffer to post to. +* pBuffer Pointer to character array. Does not need to point to a \0 terminated string. +* NumBytes Number of bytes to be stored in the SEGGER RTT control block. +* +* Return value +* >= 0 - Number of bytes written into buffer. +*/ +static unsigned _WriteBlocking(SEGGER_RTT_BUFFER_UP* pRing, const char* pBuffer, unsigned NumBytes) { + unsigned NumBytesToWrite; + unsigned NumBytesWritten; + unsigned RdOff; + unsigned WrOff; + volatile char* pDst; + // + // Write data to buffer and handle wrap-around if necessary + // + NumBytesWritten = 0u; + WrOff = pRing->WrOff; + do { + RdOff = pRing->RdOff; // May be changed by host (debug probe) in the meantime + if (RdOff > WrOff) { + NumBytesToWrite = RdOff - WrOff - 1u; + } else { + NumBytesToWrite = pRing->SizeOfBuffer - (WrOff - RdOff + 1u); + } + NumBytesToWrite = MIN(NumBytesToWrite, (pRing->SizeOfBuffer - WrOff)); // Number of bytes that can be written until buffer wrap-around + NumBytesToWrite = MIN(NumBytesToWrite, NumBytes); + pDst = (pRing->pBuffer + WrOff) + SEGGER_RTT_UNCACHED_OFF; +#if SEGGER_RTT_MEMCPY_USE_BYTELOOP + NumBytesWritten += NumBytesToWrite; + NumBytes -= NumBytesToWrite; + WrOff += NumBytesToWrite; + while (NumBytesToWrite--) { + *pDst++ = *pBuffer++; + }; +#else + SEGGER_RTT_MEMCPY((void*)pDst, pBuffer, NumBytesToWrite); + NumBytesWritten += NumBytesToWrite; + pBuffer += NumBytesToWrite; + NumBytes -= NumBytesToWrite; + WrOff += NumBytesToWrite; +#endif + if (WrOff == pRing->SizeOfBuffer) { + WrOff = 0u; + } + RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses + pRing->WrOff = WrOff; + } while (NumBytes); + return NumBytesWritten; +} + +/********************************************************************* +* +* _WriteNoCheck() +* +* Function description +* Stores a specified number of characters in SEGGER RTT ring buffer +* and updates the associated write pointer which is periodically +* read by the host. +* It is callers responsibility to make sure data actually fits in buffer. +* +* Parameters +* pRing Ring buffer to post to. +* pBuffer Pointer to character array. Does not need to point to a \0 terminated string. +* NumBytes Number of bytes to be stored in the SEGGER RTT control block. +* +* Notes +* (1) If there might not be enough space in the "Up"-buffer, call _WriteBlocking +*/ +static void _WriteNoCheck(SEGGER_RTT_BUFFER_UP* pRing, const char* pData, unsigned NumBytes) { + unsigned NumBytesAtOnce; + unsigned WrOff; + unsigned Rem; + volatile char* pDst; + + WrOff = pRing->WrOff; + Rem = pRing->SizeOfBuffer - WrOff; + if (Rem > NumBytes) { + // + // All data fits before wrap around + // + pDst = (pRing->pBuffer + WrOff) + SEGGER_RTT_UNCACHED_OFF; +#if SEGGER_RTT_MEMCPY_USE_BYTELOOP + WrOff += NumBytes; + while (NumBytes--) { + *pDst++ = *pData++; + }; + RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses + pRing->WrOff = WrOff; +#else + SEGGER_RTT_MEMCPY((void*)pDst, pData, NumBytes); + RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses + pRing->WrOff = WrOff + NumBytes; +#endif + } else { + // + // We reach the end of the buffer, so need to wrap around + // +#if SEGGER_RTT_MEMCPY_USE_BYTELOOP + pDst = (pRing->pBuffer + WrOff) + SEGGER_RTT_UNCACHED_OFF; + NumBytesAtOnce = Rem; + while (NumBytesAtOnce--) { + *pDst++ = *pData++; + }; + pDst = pRing->pBuffer + SEGGER_RTT_UNCACHED_OFF; + NumBytesAtOnce = NumBytes - Rem; + while (NumBytesAtOnce--) { + *pDst++ = *pData++; + }; + RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses + pRing->WrOff = NumBytes - Rem; +#else + NumBytesAtOnce = Rem; + pDst = (pRing->pBuffer + WrOff) + SEGGER_RTT_UNCACHED_OFF; + SEGGER_RTT_MEMCPY((void*)pDst, pData, NumBytesAtOnce); + NumBytesAtOnce = NumBytes - Rem; + pDst = pRing->pBuffer + SEGGER_RTT_UNCACHED_OFF; + SEGGER_RTT_MEMCPY((void*)pDst, pData + Rem, NumBytesAtOnce); + RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses + pRing->WrOff = NumBytesAtOnce; +#endif + } +} + +/********************************************************************* +* +* _PostTerminalSwitch() +* +* Function description +* Switch terminal to the given terminal ID. It is the caller's +* responsibility to ensure the terminal ID is correct and there is +* enough space in the buffer for this to complete successfully. +* +* Parameters +* pRing Ring buffer to post to. +* TerminalId Terminal ID to switch to. +*/ +static void _PostTerminalSwitch(SEGGER_RTT_BUFFER_UP* pRing, unsigned char TerminalId) { + unsigned char ac[2]; + + ac[0] = 0xFFu; + ac[1] = _aTerminalId[TerminalId]; // Caller made already sure that TerminalId does not exceed our terminal limit + _WriteBlocking(pRing, (const char*)ac, 2u); +} + +/********************************************************************* +* +* _GetAvailWriteSpace() +* +* Function description +* Returns the number of bytes that can be written to the ring +* buffer without blocking. +* +* Parameters +* pRing Ring buffer to check. +* +* Return value +* Number of bytes that are free in the buffer. +*/ +static unsigned _GetAvailWriteSpace(SEGGER_RTT_BUFFER_UP* pRing) { + unsigned RdOff; + unsigned WrOff; + unsigned r; + // + // Avoid warnings regarding volatile access order. It's not a problem + // in this case, but dampen compiler enthusiasm. + // + RdOff = pRing->RdOff; + WrOff = pRing->WrOff; + if (RdOff <= WrOff) { + r = pRing->SizeOfBuffer - 1u - WrOff + RdOff; + } else { + r = RdOff - WrOff - 1u; + } + return r; +} + +/********************************************************************* +* +* Public code +* +********************************************************************** +*/ + +/********************************************************************* +* +* SEGGER_RTT_ReadUpBufferNoLock() +* +* Function description +* Reads characters from SEGGER real-time-terminal control block +* which have been previously stored by the application. +* Do not lock against interrupts and multiple access. +* Used to do the same operation that J-Link does, to transfer +* RTT data via other channels, such as TCP/IP or UART. +* +* Parameters +* BufferIndex Index of Up-buffer to be used. +* pBuffer Pointer to buffer provided by target application, to copy characters from RTT-up-buffer to. +* BufferSize Size of the target application buffer. +* +* Return value +* Number of bytes that have been read. +* +* Additional information +* This function must not be called when J-Link might also do RTT. +*/ +unsigned SEGGER_RTT_ReadUpBufferNoLock(unsigned BufferIndex, void* pData, unsigned BufferSize) { + unsigned NumBytesRem; + unsigned NumBytesRead; + unsigned RdOff; + unsigned WrOff; + unsigned char* pBuffer; + SEGGER_RTT_BUFFER_UP* pRing; + volatile char* pSrc; + + INIT(); + pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + pBuffer = (unsigned char*)pData; + RdOff = pRing->RdOff; + WrOff = pRing->WrOff; + NumBytesRead = 0u; + // + // Read from current read position to wrap-around of buffer, first + // + if (RdOff > WrOff) { + NumBytesRem = pRing->SizeOfBuffer - RdOff; + NumBytesRem = MIN(NumBytesRem, BufferSize); + pSrc = (pRing->pBuffer + RdOff) + SEGGER_RTT_UNCACHED_OFF; +#if SEGGER_RTT_MEMCPY_USE_BYTELOOP + NumBytesRead += NumBytesRem; + BufferSize -= NumBytesRem; + RdOff += NumBytesRem; + while (NumBytesRem--) { + *pBuffer++ = *pSrc++; + }; +#else + SEGGER_RTT_MEMCPY(pBuffer, (void*)pSrc, NumBytesRem); + NumBytesRead += NumBytesRem; + pBuffer += NumBytesRem; + BufferSize -= NumBytesRem; + RdOff += NumBytesRem; +#endif + // + // Handle wrap-around of buffer + // + if (RdOff == pRing->SizeOfBuffer) { + RdOff = 0u; + } + } + // + // Read remaining items of buffer + // + NumBytesRem = WrOff - RdOff; + NumBytesRem = MIN(NumBytesRem, BufferSize); + if (NumBytesRem > 0u) { + pSrc = (pRing->pBuffer + RdOff) + SEGGER_RTT_UNCACHED_OFF; +#if SEGGER_RTT_MEMCPY_USE_BYTELOOP + NumBytesRead += NumBytesRem; + BufferSize -= NumBytesRem; + RdOff += NumBytesRem; + while (NumBytesRem--) { + *pBuffer++ = *pSrc++; + }; +#else + SEGGER_RTT_MEMCPY(pBuffer, (void*)pSrc, NumBytesRem); + NumBytesRead += NumBytesRem; + pBuffer += NumBytesRem; + BufferSize -= NumBytesRem; + RdOff += NumBytesRem; +#endif + } + // + // Update read offset of buffer + // + if (NumBytesRead) { + pRing->RdOff = RdOff; + } + // + return NumBytesRead; +} + +/********************************************************************* +* +* SEGGER_RTT_ReadNoLock() +* +* Function description +* Reads characters from SEGGER real-time-terminal control block +* which have been previously stored by the host. +* Do not lock against interrupts and multiple access. +* +* Parameters +* BufferIndex Index of Down-buffer to be used (e.g. 0 for "Terminal"). +* pBuffer Pointer to buffer provided by target application, to copy characters from RTT-down-buffer to. +* BufferSize Size of the target application buffer. +* +* Return value +* Number of bytes that have been read. +*/ +unsigned SEGGER_RTT_ReadNoLock(unsigned BufferIndex, void* pData, unsigned BufferSize) { + unsigned NumBytesRem; + unsigned NumBytesRead; + unsigned RdOff; + unsigned WrOff; + unsigned char* pBuffer; + SEGGER_RTT_BUFFER_DOWN* pRing; + volatile char* pSrc; + // + INIT(); + pRing = (SEGGER_RTT_BUFFER_DOWN*)((char*)&_SEGGER_RTT.aDown[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + pBuffer = (unsigned char*)pData; + RdOff = pRing->RdOff; + WrOff = pRing->WrOff; + NumBytesRead = 0u; + // + // Read from current read position to wrap-around of buffer, first + // + if (RdOff > WrOff) { + NumBytesRem = pRing->SizeOfBuffer - RdOff; + NumBytesRem = MIN(NumBytesRem, BufferSize); + pSrc = (pRing->pBuffer + RdOff) + SEGGER_RTT_UNCACHED_OFF; +#if SEGGER_RTT_MEMCPY_USE_BYTELOOP + NumBytesRead += NumBytesRem; + BufferSize -= NumBytesRem; + RdOff += NumBytesRem; + while (NumBytesRem--) { + *pBuffer++ = *pSrc++; + }; +#else + SEGGER_RTT_MEMCPY(pBuffer, (void*)pSrc, NumBytesRem); + NumBytesRead += NumBytesRem; + pBuffer += NumBytesRem; + BufferSize -= NumBytesRem; + RdOff += NumBytesRem; +#endif + // + // Handle wrap-around of buffer + // + if (RdOff == pRing->SizeOfBuffer) { + RdOff = 0u; + } + } + // + // Read remaining items of buffer + // + NumBytesRem = WrOff - RdOff; + NumBytesRem = MIN(NumBytesRem, BufferSize); + if (NumBytesRem > 0u) { + pSrc = (pRing->pBuffer + RdOff) + SEGGER_RTT_UNCACHED_OFF; +#if SEGGER_RTT_MEMCPY_USE_BYTELOOP + NumBytesRead += NumBytesRem; + BufferSize -= NumBytesRem; + RdOff += NumBytesRem; + while (NumBytesRem--) { + *pBuffer++ = *pSrc++; + }; +#else + SEGGER_RTT_MEMCPY(pBuffer, (void*)pSrc, NumBytesRem); + NumBytesRead += NumBytesRem; + pBuffer += NumBytesRem; + BufferSize -= NumBytesRem; + RdOff += NumBytesRem; +#endif + } + if (NumBytesRead) { + pRing->RdOff = RdOff; + } + // + return NumBytesRead; +} + +/********************************************************************* +* +* SEGGER_RTT_ReadUpBuffer +* +* Function description +* Reads characters from SEGGER real-time-terminal control block +* which have been previously stored by the application. +* Used to do the same operation that J-Link does, to transfer +* RTT data via other channels, such as TCP/IP or UART. +* +* Parameters +* BufferIndex Index of Up-buffer to be used. +* pBuffer Pointer to buffer provided by target application, to copy characters from RTT-up-buffer to. +* BufferSize Size of the target application buffer. +* +* Return value +* Number of bytes that have been read. +* +* Additional information +* This function must not be called when J-Link might also do RTT. +* This function locks against all other RTT operations. I.e. during +* the read operation, writing is also locked. +* If only one consumer reads from the up buffer, +* call sEGGER_RTT_ReadUpBufferNoLock() instead. +*/ +unsigned SEGGER_RTT_ReadUpBuffer(unsigned BufferIndex, void* pBuffer, unsigned BufferSize) { + unsigned NumBytesRead; + + SEGGER_RTT_LOCK(); + // + // Call the non-locking read function + // + NumBytesRead = SEGGER_RTT_ReadUpBufferNoLock(BufferIndex, pBuffer, BufferSize); + // + // Finish up. + // + SEGGER_RTT_UNLOCK(); + // + return NumBytesRead; +} + +/********************************************************************* +* +* SEGGER_RTT_Read +* +* Function description +* Reads characters from SEGGER real-time-terminal control block +* which have been previously stored by the host. +* +* Parameters +* BufferIndex Index of Down-buffer to be used (e.g. 0 for "Terminal"). +* pBuffer Pointer to buffer provided by target application, to copy characters from RTT-down-buffer to. +* BufferSize Size of the target application buffer. +* +* Return value +* Number of bytes that have been read. +*/ +unsigned SEGGER_RTT_Read(unsigned BufferIndex, void* pBuffer, unsigned BufferSize) { + unsigned NumBytesRead; + + SEGGER_RTT_LOCK(); + // + // Call the non-locking read function + // + NumBytesRead = SEGGER_RTT_ReadNoLock(BufferIndex, pBuffer, BufferSize); + // + // Finish up. + // + SEGGER_RTT_UNLOCK(); + // + return NumBytesRead; +} + +/********************************************************************* +* +* SEGGER_RTT_WriteWithOverwriteNoLock +* +* Function description +* Stores a specified number of characters in SEGGER RTT +* control block. +* SEGGER_RTT_WriteWithOverwriteNoLock does not lock the application +* and overwrites data if the data does not fit into the buffer. +* +* Parameters +* BufferIndex Index of "Up"-buffer to be used (e.g. 0 for "Terminal"). +* pBuffer Pointer to character array. Does not need to point to a \0 terminated string. +* NumBytes Number of bytes to be stored in the SEGGER RTT control block. +* +* Notes +* (1) If there is not enough space in the "Up"-buffer, data is overwritten. +* (2) For performance reasons this function does not call Init() +* and may only be called after RTT has been initialized. +* Either by calling SEGGER_RTT_Init() or calling another RTT API function first. +* (3) Do not use SEGGER_RTT_WriteWithOverwriteNoLock if a J-Link +* connection reads RTT data. +*/ +void SEGGER_RTT_WriteWithOverwriteNoLock(unsigned BufferIndex, const void* pBuffer, unsigned NumBytes) { + const char* pData; + SEGGER_RTT_BUFFER_UP* pRing; + unsigned Avail; + volatile char* pDst; + // + // Get "to-host" ring buffer and copy some elements into local variables. + // + pData = (const char *)pBuffer; + pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + // + // Check if we will overwrite data and need to adjust the RdOff. + // + if (pRing->WrOff == pRing->RdOff) { + Avail = pRing->SizeOfBuffer - 1u; + } else if ( pRing->WrOff < pRing->RdOff) { + Avail = pRing->RdOff - pRing->WrOff - 1u; + } else { + Avail = pRing->RdOff - pRing->WrOff - 1u + pRing->SizeOfBuffer; + } + if (NumBytes > Avail) { + pRing->RdOff += (NumBytes - Avail); + while (pRing->RdOff >= pRing->SizeOfBuffer) { + pRing->RdOff -= pRing->SizeOfBuffer; + } + } + // + // Write all data, no need to check the RdOff, but possibly handle multiple wrap-arounds + // + Avail = pRing->SizeOfBuffer - pRing->WrOff; + do { + if (Avail > NumBytes) { + // + // Last round + // + pDst = (pRing->pBuffer + pRing->WrOff) + SEGGER_RTT_UNCACHED_OFF; +#if SEGGER_RTT_MEMCPY_USE_BYTELOOP + Avail = NumBytes; + while (NumBytes--) { + *pDst++ = *pData++; + }; + RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses + pRing->WrOff += Avail; +#else + SEGGER_RTT_MEMCPY((void*)pDst, pData, NumBytes); + RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses + pRing->WrOff += NumBytes; +#endif + break; + } else { + // + // Wrap-around necessary, write until wrap-around and reset WrOff + // + pDst = (pRing->pBuffer + pRing->WrOff) + SEGGER_RTT_UNCACHED_OFF; +#if SEGGER_RTT_MEMCPY_USE_BYTELOOP + NumBytes -= Avail; + while (Avail--) { + *pDst++ = *pData++; + }; + RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses + pRing->WrOff = 0; +#else + SEGGER_RTT_MEMCPY((void*)pDst, pData, Avail); + pData += Avail; + RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses + pRing->WrOff = 0; + NumBytes -= Avail; +#endif + Avail = (pRing->SizeOfBuffer - 1); + } + } while (NumBytes); +} + +/********************************************************************* +* +* SEGGER_RTT_WriteSkipNoLock +* +* Function description +* Stores a specified number of characters in SEGGER RTT +* control block which is then read by the host. +* SEGGER_RTT_WriteSkipNoLock does not lock the application and +* skips all data, if the data does not fit into the buffer. +* +* Parameters +* BufferIndex Index of "Up"-buffer to be used (e.g. 0 for "Terminal"). +* pBuffer Pointer to character array. Does not need to point to a \0 terminated string. +* NumBytes Number of bytes to be stored in the SEGGER RTT control block. +* MUST be > 0!!! +* This is done for performance reasons, so no initial check has do be done. +* +* Return value +* 1: Data has been copied +* 0: No space, data has not been copied +* +* Notes +* (1) If there is not enough space in the "Up"-buffer, all data is dropped. +* (2) For performance reasons this function does not call Init() +* and may only be called after RTT has been initialized. +* Either by calling SEGGER_RTT_Init() or calling another RTT API function first. +*/ +#if (RTT_USE_ASM == 0) +unsigned SEGGER_RTT_WriteSkipNoLock(unsigned BufferIndex, const void* pBuffer, unsigned NumBytes) { + const char* pData; + SEGGER_RTT_BUFFER_UP* pRing; + unsigned Avail; + unsigned RdOff; + unsigned WrOff; + unsigned Rem; + volatile char* pDst; + // + // Cases: + // 1) RdOff <= WrOff => Space until wrap-around is sufficient + // 2) RdOff <= WrOff => Space after wrap-around needed (copy in 2 chunks) + // 3) RdOff < WrOff => No space in buf + // 4) RdOff > WrOff => Space is sufficient + // 5) RdOff > WrOff => No space in buf + // + // 1) is the most common case for large buffers and assuming that J-Link reads the data fast enough + // + pData = (const char *)pBuffer; + pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + RdOff = pRing->RdOff; + WrOff = pRing->WrOff; + if (RdOff <= WrOff) { // Case 1), 2) or 3) + Avail = pRing->SizeOfBuffer - WrOff - 1u; // Space until wrap-around (assume 1 byte not usable for case that RdOff == 0) + if (Avail >= NumBytes) { // Case 1)? +CopyStraight: + pDst = (pRing->pBuffer + WrOff) + SEGGER_RTT_UNCACHED_OFF; + memcpy((void*)pDst, pData, NumBytes); + RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses + pRing->WrOff = WrOff + NumBytes; + return 1; + } + Avail += RdOff; // Space incl. wrap-around + if (Avail >= NumBytes) { // Case 2? => If not, we have case 3) (does not fit) + Rem = pRing->SizeOfBuffer - WrOff; // Space until end of buffer + pDst = (pRing->pBuffer + WrOff) + SEGGER_RTT_UNCACHED_OFF; + memcpy((void*)pDst, pData, Rem); // Copy 1st chunk + NumBytes -= Rem; + // + // Special case: First check that assumed RdOff == 0 calculated that last element before wrap-around could not be used + // But 2nd check (considering space until wrap-around and until RdOff) revealed that RdOff is not 0, so we can use the last element + // In this case, we may use a copy straight until buffer end anyway without needing to copy 2 chunks + // Therefore, check if 2nd memcpy is necessary at all + // + if (NumBytes) { + pDst = pRing->pBuffer + SEGGER_RTT_UNCACHED_OFF; + memcpy((void*)pDst, pData + Rem, NumBytes); + } + RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses + pRing->WrOff = NumBytes; + return 1; + } + } else { // Potential case 4) + Avail = RdOff - WrOff - 1u; + if (Avail >= NumBytes) { // Case 4)? => If not, we have case 5) (does not fit) + goto CopyStraight; + } + } + return 0; // No space in buffer +} +#endif + +/********************************************************************* +* +* SEGGER_RTT_WriteDownBufferNoLock +* +* Function description +* Stores a specified number of characters in SEGGER RTT +* control block inside a buffer. +* SEGGER_RTT_WriteDownBufferNoLock does not lock the application. +* Used to do the same operation that J-Link does, to transfer +* RTT data from other channels, such as TCP/IP or UART. +* +* Parameters +* BufferIndex Index of "Down"-buffer to be used. +* pBuffer Pointer to character array. Does not need to point to a \0 terminated string. +* NumBytes Number of bytes to be stored in the SEGGER RTT control block. +* +* Return value +* Number of bytes which have been stored in the "Down"-buffer. +* +* Notes +* (1) Data is stored according to buffer flags. +* (2) For performance reasons this function does not call Init() +* and may only be called after RTT has been initialized. +* Either by calling SEGGER_RTT_Init() or calling another RTT API function first. +* +* Additional information +* This function must not be called when J-Link might also do RTT. +*/ +unsigned SEGGER_RTT_WriteDownBufferNoLock(unsigned BufferIndex, const void* pBuffer, unsigned NumBytes) { + unsigned Status; + unsigned Avail; + const char* pData; + SEGGER_RTT_BUFFER_UP* pRing; + // + // Get "to-target" ring buffer. + // It is save to cast that to a "to-host" buffer. Up and Down buffer differ in volatility of offsets that might be modified by J-Link. + // + pData = (const char *)pBuffer; + pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aDown[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + // + // How we output depends upon the mode... + // + switch (pRing->Flags) { + case SEGGER_RTT_MODE_NO_BLOCK_SKIP: + // + // If we are in skip mode and there is no space for the whole + // of this output, don't bother. + // + Avail = _GetAvailWriteSpace(pRing); + if (Avail < NumBytes) { + Status = 0u; + } else { + Status = NumBytes; + _WriteNoCheck(pRing, pData, NumBytes); + } + break; + case SEGGER_RTT_MODE_NO_BLOCK_TRIM: + // + // If we are in trim mode, trim to what we can output without blocking. + // + Avail = _GetAvailWriteSpace(pRing); + Status = Avail < NumBytes ? Avail : NumBytes; + _WriteNoCheck(pRing, pData, Status); + break; + case SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL: + // + // If we are in blocking mode, output everything. + // + Status = _WriteBlocking(pRing, pData, NumBytes); + break; + default: + Status = 0u; + break; + } + // + // Finish up. + // + return Status; +} + +/********************************************************************* +* +* SEGGER_RTT_WriteNoLock +* +* Function description +* Stores a specified number of characters in SEGGER RTT +* control block which is then read by the host. +* SEGGER_RTT_WriteNoLock does not lock the application. +* +* Parameters +* BufferIndex Index of "Up"-buffer to be used (e.g. 0 for "Terminal"). +* pBuffer Pointer to character array. Does not need to point to a \0 terminated string. +* NumBytes Number of bytes to be stored in the SEGGER RTT control block. +* +* Return value +* Number of bytes which have been stored in the "Up"-buffer. +* +* Notes +* (1) Data is stored according to buffer flags. +* (2) For performance reasons this function does not call Init() +* and may only be called after RTT has been initialized. +* Either by calling SEGGER_RTT_Init() or calling another RTT API function first. +*/ +unsigned SEGGER_RTT_WriteNoLock(unsigned BufferIndex, const void* pBuffer, unsigned NumBytes) { + unsigned Status; + unsigned Avail; + const char* pData; + SEGGER_RTT_BUFFER_UP* pRing; + // + // Get "to-host" ring buffer. + // + pData = (const char *)pBuffer; + pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + // + // How we output depends upon the mode... + // + switch (pRing->Flags) { + case SEGGER_RTT_MODE_NO_BLOCK_SKIP: + // + // If we are in skip mode and there is no space for the whole + // of this output, don't bother. + // + Avail = _GetAvailWriteSpace(pRing); + if (Avail < NumBytes) { + Status = 0u; + } else { + Status = NumBytes; + _WriteNoCheck(pRing, pData, NumBytes); + } + break; + case SEGGER_RTT_MODE_NO_BLOCK_TRIM: + // + // If we are in trim mode, trim to what we can output without blocking. + // + Avail = _GetAvailWriteSpace(pRing); + Status = Avail < NumBytes ? Avail : NumBytes; + _WriteNoCheck(pRing, pData, Status); + break; + case SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL: + // + // If we are in blocking mode, output everything. + // + Status = _WriteBlocking(pRing, pData, NumBytes); + break; + default: + Status = 0u; + break; + } + // + // Finish up. + // + return Status; +} + +/********************************************************************* +* +* SEGGER_RTT_WriteDownBuffer +* +* Function description +* Stores a specified number of characters in SEGGER RTT control block in a buffer. +* +* Parameters +* BufferIndex Index of "Up"-buffer to be used (e.g. 0 for "Terminal"). +* pBuffer Pointer to character array. Does not need to point to a \0 terminated string. +* NumBytes Number of bytes to be stored in the SEGGER RTT control block. +* +* Return value +* Number of bytes which have been stored in the "Down"-buffer. +* +* Notes +* (1) Data is stored according to buffer flags. +* +* Additional information +* This function must not be called when J-Link might also do RTT. +* This function locks against all other RTT operations. I.e. during +* the write operation, writing from the application is also locked. +* If only one consumer writes to the down buffer, +* call SEGGER_RTT_WriteDownBufferNoLock() instead. +*/ +unsigned SEGGER_RTT_WriteDownBuffer(unsigned BufferIndex, const void* pBuffer, unsigned NumBytes) { + unsigned Status; + + INIT(); + SEGGER_RTT_LOCK(); + Status = SEGGER_RTT_WriteDownBufferNoLock(BufferIndex, pBuffer, NumBytes); // Call the non-locking write function + SEGGER_RTT_UNLOCK(); + return Status; +} + +/********************************************************************* +* +* SEGGER_RTT_Write +* +* Function description +* Stores a specified number of characters in SEGGER RTT +* control block which is then read by the host. +* +* Parameters +* BufferIndex Index of "Up"-buffer to be used (e.g. 0 for "Terminal"). +* pBuffer Pointer to character array. Does not need to point to a \0 terminated string. +* NumBytes Number of bytes to be stored in the SEGGER RTT control block. +* +* Return value +* Number of bytes which have been stored in the "Up"-buffer. +* +* Notes +* (1) Data is stored according to buffer flags. +*/ +unsigned SEGGER_RTT_Write(unsigned BufferIndex, const void* pBuffer, unsigned NumBytes) { + unsigned Status; + + INIT(); + SEGGER_RTT_LOCK(); + Status = SEGGER_RTT_WriteNoLock(BufferIndex, pBuffer, NumBytes); // Call the non-locking write function + SEGGER_RTT_UNLOCK(); + return Status; +} + +/********************************************************************* +* +* SEGGER_RTT_WriteString +* +* Function description +* Stores string in SEGGER RTT control block. +* This data is read by the host. +* +* Parameters +* BufferIndex Index of "Up"-buffer to be used (e.g. 0 for "Terminal"). +* s Pointer to string. +* +* Return value +* Number of bytes which have been stored in the "Up"-buffer. +* +* Notes +* (1) Data is stored according to buffer flags. +* (2) String passed to this function has to be \0 terminated +* (3) \0 termination character is *not* stored in RTT buffer +*/ +unsigned SEGGER_RTT_WriteString(unsigned BufferIndex, const char* s) { + unsigned Len; + + Len = STRLEN(s); + return SEGGER_RTT_Write(BufferIndex, s, Len); +} + +/********************************************************************* +* +* SEGGER_RTT_PutCharSkipNoLock +* +* Function description +* Stores a single character/byte in SEGGER RTT buffer. +* SEGGER_RTT_PutCharSkipNoLock does not lock the application and +* skips the byte, if it does not fit into the buffer. +* +* Parameters +* BufferIndex Index of "Up"-buffer to be used (e.g. 0 for "Terminal"). +* c Byte to be stored. +* +* Return value +* Number of bytes which have been stored in the "Up"-buffer. +* +* Notes +* (1) If there is not enough space in the "Up"-buffer, the character is dropped. +* (2) For performance reasons this function does not call Init() +* and may only be called after RTT has been initialized. +* Either by calling SEGGER_RTT_Init() or calling another RTT API function first. +*/ + +unsigned SEGGER_RTT_PutCharSkipNoLock(unsigned BufferIndex, char c) { + SEGGER_RTT_BUFFER_UP* pRing; + unsigned WrOff; + unsigned Status; + volatile char* pDst; + // + // Get "to-host" ring buffer. + // + pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + // + // Get write position and handle wrap-around if necessary + // + WrOff = pRing->WrOff + 1; + if (WrOff == pRing->SizeOfBuffer) { + WrOff = 0; + } + // + // Output byte if free space is available + // + if (WrOff != pRing->RdOff) { + pDst = (pRing->pBuffer + pRing->WrOff) + SEGGER_RTT_UNCACHED_OFF; + *pDst = c; + RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses + pRing->WrOff = WrOff; + Status = 1; + } else { + Status = 0; + } + // + return Status; +} + +/********************************************************************* +* +* SEGGER_RTT_PutCharSkip +* +* Function description +* Stores a single character/byte in SEGGER RTT buffer. +* +* Parameters +* BufferIndex Index of "Up"-buffer to be used (e.g. 0 for "Terminal"). +* c Byte to be stored. +* +* Return value +* Number of bytes which have been stored in the "Up"-buffer. +* +* Notes +* (1) If there is not enough space in the "Up"-buffer, the character is dropped. +*/ + +unsigned SEGGER_RTT_PutCharSkip(unsigned BufferIndex, char c) { + SEGGER_RTT_BUFFER_UP* pRing; + unsigned WrOff; + unsigned Status; + volatile char* pDst; + // + // Prepare + // + INIT(); + SEGGER_RTT_LOCK(); + // + // Get "to-host" ring buffer. + // + pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + // + // Get write position and handle wrap-around if necessary + // + WrOff = pRing->WrOff + 1; + if (WrOff == pRing->SizeOfBuffer) { + WrOff = 0; + } + // + // Output byte if free space is available + // + if (WrOff != pRing->RdOff) { + pDst = (pRing->pBuffer + pRing->WrOff) + SEGGER_RTT_UNCACHED_OFF; + *pDst = c; + RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses + pRing->WrOff = WrOff; + Status = 1; + } else { + Status = 0; + } + // + // Finish up. + // + SEGGER_RTT_UNLOCK(); + // + return Status; +} + + /********************************************************************* +* +* SEGGER_RTT_PutChar +* +* Function description +* Stores a single character/byte in SEGGER RTT buffer. +* +* Parameters +* BufferIndex Index of "Up"-buffer to be used (e.g. 0 for "Terminal"). +* c Byte to be stored. +* +* Return value +* Number of bytes which have been stored in the "Up"-buffer. +* +* Notes +* (1) Data is stored according to buffer flags. +*/ + +unsigned SEGGER_RTT_PutChar(unsigned BufferIndex, char c) { + SEGGER_RTT_BUFFER_UP* pRing; + unsigned WrOff; + unsigned Status; + volatile char* pDst; + // + // Prepare + // + INIT(); + SEGGER_RTT_LOCK(); + // + // Get "to-host" ring buffer. + // + pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + // + // Get write position and handle wrap-around if necessary + // + WrOff = pRing->WrOff + 1; + if (WrOff == pRing->SizeOfBuffer) { + WrOff = 0; + } + // + // Wait for free space if mode is set to blocking + // + if (pRing->Flags == SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL) { + while (WrOff == pRing->RdOff) { + ; + } + } + // + // Output byte if free space is available + // + if (WrOff != pRing->RdOff) { + pDst = (pRing->pBuffer + pRing->WrOff) + SEGGER_RTT_UNCACHED_OFF; + *pDst = c; + RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses + pRing->WrOff = WrOff; + Status = 1; + } else { + Status = 0; + } + // + // Finish up. + // + SEGGER_RTT_UNLOCK(); + return Status; +} + +/********************************************************************* +* +* SEGGER_RTT_GetKey +* +* Function description +* Reads one character from the SEGGER RTT buffer. +* Host has previously stored data there. +* +* Return value +* < 0 - No character available (buffer empty). +* >= 0 - Character which has been read. (Possible values: 0 - 255) +* +* Notes +* (1) This function is only specified for accesses to RTT buffer 0. +*/ +int SEGGER_RTT_GetKey(void) { + char c; + int r; + + r = (int)SEGGER_RTT_Read(0u, &c, 1u); + if (r == 1) { + r = (int)(unsigned char)c; + } else { + r = -1; + } + return r; +} + +/********************************************************************* +* +* SEGGER_RTT_WaitKey +* +* Function description +* Waits until at least one character is avaible in the SEGGER RTT buffer. +* Once a character is available, it is read and this function returns. +* +* Return value +* >=0 - Character which has been read. +* +* Notes +* (1) This function is only specified for accesses to RTT buffer 0 +* (2) This function is blocking if no character is present in RTT buffer +*/ +int SEGGER_RTT_WaitKey(void) { + int r; + + do { + r = SEGGER_RTT_GetKey(); + } while (r < 0); + return r; +} + +/********************************************************************* +* +* SEGGER_RTT_HasKey +* +* Function description +* Checks if at least one character for reading is available in the SEGGER RTT buffer. +* +* Return value +* == 0 - No characters are available to read. +* == 1 - At least one character is available. +* +* Notes +* (1) This function is only specified for accesses to RTT buffer 0 +*/ +int SEGGER_RTT_HasKey(void) { + SEGGER_RTT_BUFFER_DOWN* pRing; + unsigned RdOff; + int r; + + INIT(); + pRing = (SEGGER_RTT_BUFFER_DOWN*)((char*)&_SEGGER_RTT.aDown[0] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + RdOff = pRing->RdOff; + if (RdOff != pRing->WrOff) { + r = 1; + } else { + r = 0; + } + return r; +} + +/********************************************************************* +* +* SEGGER_RTT_HasData +* +* Function description +* Check if there is data from the host in the given buffer. +* +* Return value: +* ==0: No data +* !=0: Data in buffer +* +*/ +unsigned SEGGER_RTT_HasData(unsigned BufferIndex) { + SEGGER_RTT_BUFFER_DOWN* pRing; + unsigned v; + + pRing = (SEGGER_RTT_BUFFER_DOWN*)((char*)&_SEGGER_RTT.aDown[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + v = pRing->WrOff; + return v - pRing->RdOff; +} + +/********************************************************************* +* +* SEGGER_RTT_HasDataUp +* +* Function description +* Check if there is data remaining to be sent in the given buffer. +* +* Return value: +* ==0: No data +* !=0: Data in buffer +* +*/ +unsigned SEGGER_RTT_HasDataUp(unsigned BufferIndex) { + SEGGER_RTT_BUFFER_UP* pRing; + unsigned v; + + pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + v = pRing->RdOff; + return pRing->WrOff - v; +} + +/********************************************************************* +* +* SEGGER_RTT_AllocDownBuffer +* +* Function description +* Run-time configuration of the next down-buffer (H->T). +* The next buffer, which is not used yet is configured. +* This includes: Buffer address, size, name, flags, ... +* +* Parameters +* sName Pointer to a constant name string. +* pBuffer Pointer to a buffer to be used. +* BufferSize Size of the buffer. +* Flags Operating modes. Define behavior if buffer is full (not enough space for entire message). +* +* Return value +* >= 0 - O.K. Buffer Index +* < 0 - Error +*/ +int SEGGER_RTT_AllocDownBuffer(const char* sName, void* pBuffer, unsigned BufferSize, unsigned Flags) { + int BufferIndex; + volatile SEGGER_RTT_CB* pRTTCB; + + INIT(); + SEGGER_RTT_LOCK(); + pRTTCB = (volatile SEGGER_RTT_CB*)((unsigned char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + BufferIndex = 0; + do { + if (pRTTCB->aDown[BufferIndex].pBuffer == NULL) { + break; + } + BufferIndex++; + } while (BufferIndex < pRTTCB->MaxNumDownBuffers); + if (BufferIndex < pRTTCB->MaxNumDownBuffers) { + pRTTCB->aDown[BufferIndex].sName = sName; + pRTTCB->aDown[BufferIndex].pBuffer = (char*)pBuffer; + pRTTCB->aDown[BufferIndex].SizeOfBuffer = BufferSize; + pRTTCB->aDown[BufferIndex].RdOff = 0u; + pRTTCB->aDown[BufferIndex].WrOff = 0u; + pRTTCB->aDown[BufferIndex].Flags = Flags; + RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses + } else { + BufferIndex = -1; + } + SEGGER_RTT_UNLOCK(); + return BufferIndex; +} + +/********************************************************************* +* +* SEGGER_RTT_AllocUpBuffer +* +* Function description +* Run-time configuration of the next up-buffer (T->H). +* The next buffer, which is not used yet is configured. +* This includes: Buffer address, size, name, flags, ... +* +* Parameters +* sName Pointer to a constant name string. +* pBuffer Pointer to a buffer to be used. +* BufferSize Size of the buffer. +* Flags Operating modes. Define behavior if buffer is full (not enough space for entire message). +* +* Return value +* >= 0 - O.K. Buffer Index +* < 0 - Error +*/ +int SEGGER_RTT_AllocUpBuffer(const char* sName, void* pBuffer, unsigned BufferSize, unsigned Flags) { + int BufferIndex; + volatile SEGGER_RTT_CB* pRTTCB; + + INIT(); + SEGGER_RTT_LOCK(); + pRTTCB = (volatile SEGGER_RTT_CB*)((unsigned char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + BufferIndex = 0; + do { + if (pRTTCB->aUp[BufferIndex].pBuffer == NULL) { + break; + } + BufferIndex++; + } while (BufferIndex < pRTTCB->MaxNumUpBuffers); + if (BufferIndex < pRTTCB->MaxNumUpBuffers) { + pRTTCB->aUp[BufferIndex].sName = sName; + pRTTCB->aUp[BufferIndex].pBuffer = (char*)pBuffer; + pRTTCB->aUp[BufferIndex].SizeOfBuffer = BufferSize; + pRTTCB->aUp[BufferIndex].RdOff = 0u; + pRTTCB->aUp[BufferIndex].WrOff = 0u; + pRTTCB->aUp[BufferIndex].Flags = Flags; + RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses + } else { + BufferIndex = -1; + } + SEGGER_RTT_UNLOCK(); + return BufferIndex; +} + +/********************************************************************* +* +* SEGGER_RTT_ConfigUpBuffer +* +* Function description +* Run-time configuration of a specific up-buffer (T->H). +* Buffer to be configured is specified by index. +* This includes: Buffer address, size, name, flags, ... +* +* Parameters +* BufferIndex Index of the buffer to configure. +* sName Pointer to a constant name string. +* pBuffer Pointer to a buffer to be used. +* BufferSize Size of the buffer. +* Flags Operating modes. Define behavior if buffer is full (not enough space for entire message). +* +* Return value +* >= 0 - O.K. +* < 0 - Error +* +* Additional information +* Buffer 0 is configured on compile-time. +* May only be called once per buffer. +* Buffer name and flags can be reconfigured using the appropriate functions. +*/ +int SEGGER_RTT_ConfigUpBuffer(unsigned BufferIndex, const char* sName, void* pBuffer, unsigned BufferSize, unsigned Flags) { + int r; + volatile SEGGER_RTT_CB* pRTTCB; + + INIT(); + pRTTCB = (volatile SEGGER_RTT_CB*)((unsigned char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + if (BufferIndex < (unsigned)pRTTCB->MaxNumUpBuffers) { + SEGGER_RTT_LOCK(); + if (BufferIndex > 0u) { + pRTTCB->aUp[BufferIndex].sName = sName; + pRTTCB->aUp[BufferIndex].pBuffer = (char*)pBuffer; + pRTTCB->aUp[BufferIndex].SizeOfBuffer = BufferSize; + pRTTCB->aUp[BufferIndex].RdOff = 0u; + pRTTCB->aUp[BufferIndex].WrOff = 0u; + } + pRTTCB->aUp[BufferIndex].Flags = Flags; + SEGGER_RTT_UNLOCK(); + r = 0; + } else { + r = -1; + } + return r; +} + +/********************************************************************* +* +* SEGGER_RTT_ConfigDownBuffer +* +* Function description +* Run-time configuration of a specific down-buffer (H->T). +* Buffer to be configured is specified by index. +* This includes: Buffer address, size, name, flags, ... +* +* Parameters +* BufferIndex Index of the buffer to configure. +* sName Pointer to a constant name string. +* pBuffer Pointer to a buffer to be used. +* BufferSize Size of the buffer. +* Flags Operating modes. Define behavior if buffer is full (not enough space for entire message). +* +* Return value +* >= 0 O.K. +* < 0 Error +* +* Additional information +* Buffer 0 is configured on compile-time. +* May only be called once per buffer. +* Buffer name and flags can be reconfigured using the appropriate functions. +*/ +int SEGGER_RTT_ConfigDownBuffer(unsigned BufferIndex, const char* sName, void* pBuffer, unsigned BufferSize, unsigned Flags) { + int r; + volatile SEGGER_RTT_CB* pRTTCB; + + INIT(); + pRTTCB = (volatile SEGGER_RTT_CB*)((unsigned char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + if (BufferIndex < (unsigned)pRTTCB->MaxNumDownBuffers) { + SEGGER_RTT_LOCK(); + if (BufferIndex > 0u) { + pRTTCB->aDown[BufferIndex].sName = sName; + pRTTCB->aDown[BufferIndex].pBuffer = (char*)pBuffer; + pRTTCB->aDown[BufferIndex].SizeOfBuffer = BufferSize; + pRTTCB->aDown[BufferIndex].RdOff = 0u; + pRTTCB->aDown[BufferIndex].WrOff = 0u; + } + pRTTCB->aDown[BufferIndex].Flags = Flags; + RTT__DMB(); // Force data write to be complete before writing the , in case CPU is allowed to change the order of memory accesses + SEGGER_RTT_UNLOCK(); + r = 0; + } else { + r = -1; + } + return r; +} + +/********************************************************************* +* +* SEGGER_RTT_SetNameUpBuffer +* +* Function description +* Run-time configuration of a specific up-buffer name (T->H). +* Buffer to be configured is specified by index. +* +* Parameters +* BufferIndex Index of the buffer to renamed. +* sName Pointer to a constant name string. +* +* Return value +* >= 0 O.K. +* < 0 Error +*/ +int SEGGER_RTT_SetNameUpBuffer(unsigned BufferIndex, const char* sName) { + int r; + volatile SEGGER_RTT_CB* pRTTCB; + + INIT(); + pRTTCB = (volatile SEGGER_RTT_CB*)((unsigned char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + if (BufferIndex < (unsigned)pRTTCB->MaxNumUpBuffers) { + SEGGER_RTT_LOCK(); + pRTTCB->aUp[BufferIndex].sName = sName; + SEGGER_RTT_UNLOCK(); + r = 0; + } else { + r = -1; + } + return r; +} + +/********************************************************************* +* +* SEGGER_RTT_SetNameDownBuffer +* +* Function description +* Run-time configuration of a specific Down-buffer name (T->H). +* Buffer to be configured is specified by index. +* +* Parameters +* BufferIndex Index of the buffer to renamed. +* sName Pointer to a constant name string. +* +* Return value +* >= 0 O.K. +* < 0 Error +*/ +int SEGGER_RTT_SetNameDownBuffer(unsigned BufferIndex, const char* sName) { + int r; + volatile SEGGER_RTT_CB* pRTTCB; + + INIT(); + pRTTCB = (volatile SEGGER_RTT_CB*)((unsigned char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + if (BufferIndex < (unsigned)pRTTCB->MaxNumDownBuffers) { + SEGGER_RTT_LOCK(); + pRTTCB->aDown[BufferIndex].sName = sName; + SEGGER_RTT_UNLOCK(); + r = 0; + } else { + r = -1; + } + return r; +} + +/********************************************************************* +* +* SEGGER_RTT_SetFlagsUpBuffer +* +* Function description +* Run-time configuration of specific up-buffer flags (T->H). +* Buffer to be configured is specified by index. +* +* Parameters +* BufferIndex Index of the buffer. +* Flags Flags to set for the buffer. +* +* Return value +* >= 0 O.K. +* < 0 Error +*/ +int SEGGER_RTT_SetFlagsUpBuffer(unsigned BufferIndex, unsigned Flags) { + int r; + volatile SEGGER_RTT_CB* pRTTCB; + + INIT(); + pRTTCB = (volatile SEGGER_RTT_CB*)((unsigned char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + if (BufferIndex < (unsigned)pRTTCB->MaxNumUpBuffers) { + SEGGER_RTT_LOCK(); + pRTTCB->aUp[BufferIndex].Flags = Flags; + SEGGER_RTT_UNLOCK(); + r = 0; + } else { + r = -1; + } + return r; +} + +/********************************************************************* +* +* SEGGER_RTT_SetFlagsDownBuffer +* +* Function description +* Run-time configuration of specific Down-buffer flags (T->H). +* Buffer to be configured is specified by index. +* +* Parameters +* BufferIndex Index of the buffer to renamed. +* Flags Flags to set for the buffer. +* +* Return value +* >= 0 O.K. +* < 0 Error +*/ +int SEGGER_RTT_SetFlagsDownBuffer(unsigned BufferIndex, unsigned Flags) { + int r; + volatile SEGGER_RTT_CB* pRTTCB; + + INIT(); + pRTTCB = (volatile SEGGER_RTT_CB*)((unsigned char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + if (BufferIndex < (unsigned)pRTTCB->MaxNumDownBuffers) { + SEGGER_RTT_LOCK(); + pRTTCB->aDown[BufferIndex].Flags = Flags; + SEGGER_RTT_UNLOCK(); + r = 0; + } else { + r = -1; + } + return r; +} + +/********************************************************************* +* +* SEGGER_RTT_Init +* +* Function description +* Initializes the RTT Control Block. +* Should be used in RAM targets, at start of the application. +* +*/ +void SEGGER_RTT_Init (void) { + _DoInit(); +} + +/********************************************************************* +* +* SEGGER_RTT_SetTerminal +* +* Function description +* Sets the terminal to be used for output on channel 0. +* +* Parameters +* TerminalId Index of the terminal. +* +* Return value +* >= 0 O.K. +* < 0 Error (e.g. if RTT is configured for non-blocking mode and there was no space in the buffer to set the new terminal Id) +* +* Notes +* (1) Buffer 0 is always reserved for terminal I/O, so we can use index 0 here, fixed +*/ +int SEGGER_RTT_SetTerminal (unsigned char TerminalId) { + unsigned char ac[2]; + SEGGER_RTT_BUFFER_UP* pRing; + unsigned Avail; + int r; + + INIT(); + r = 0; + ac[0] = 0xFFu; + if (TerminalId < sizeof(_aTerminalId)) { // We only support a certain number of channels + ac[1] = _aTerminalId[TerminalId]; + pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[0] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + SEGGER_RTT_LOCK(); // Lock to make sure that no other task is writing into buffer, while we are and number of free bytes in buffer does not change downwards after checking and before writing + if ((pRing->Flags & SEGGER_RTT_MODE_MASK) == SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL) { + _ActiveTerminal = TerminalId; + _WriteBlocking(pRing, (const char*)ac, 2u); + } else { // Skipping mode or trim mode? => We cannot trim this command so handling is the same for both modes + Avail = _GetAvailWriteSpace(pRing); + if (Avail >= 2) { + _ActiveTerminal = TerminalId; // Only change active terminal in case of success + _WriteNoCheck(pRing, (const char*)ac, 2u); + } else { + r = -1; + } + } + SEGGER_RTT_UNLOCK(); + } else { + r = -1; + } + return r; +} + +/********************************************************************* +* +* SEGGER_RTT_TerminalOut +* +* Function description +* Writes a string to the given terminal +* without changing the terminal for channel 0. +* +* Parameters +* TerminalId Index of the terminal. +* s String to be printed on the terminal. +* +* Return value +* >= 0 - Number of bytes written. +* < 0 - Error. +* +*/ +int SEGGER_RTT_TerminalOut (unsigned char TerminalId, const char* s) { + int Status; + unsigned FragLen; + unsigned Avail; + SEGGER_RTT_BUFFER_UP* pRing; + // + INIT(); + // + // Validate terminal ID. + // + if (TerminalId < (char)sizeof(_aTerminalId)) { // We only support a certain number of channels + // + // Get "to-host" ring buffer. + // + pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[0] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + // + // Need to be able to change terminal, write data, change back. + // Compute the fixed and variable sizes. + // + FragLen = STRLEN(s); + // + // How we output depends upon the mode... + // + SEGGER_RTT_LOCK(); + Avail = _GetAvailWriteSpace(pRing); + switch (pRing->Flags & SEGGER_RTT_MODE_MASK) { + case SEGGER_RTT_MODE_NO_BLOCK_SKIP: + // + // If we are in skip mode and there is no space for the whole + // of this output, don't bother switching terminals at all. + // + if (Avail < (FragLen + 4u)) { + Status = 0; + } else { + _PostTerminalSwitch(pRing, TerminalId); + Status = (int)_WriteBlocking(pRing, s, FragLen); + _PostTerminalSwitch(pRing, _ActiveTerminal); + } + break; + case SEGGER_RTT_MODE_NO_BLOCK_TRIM: + // + // If we are in trim mode and there is not enough space for everything, + // trim the output but always include the terminal switch. If no room + // for terminal switch, skip that totally. + // + if (Avail < 4u) { + Status = -1; + } else { + _PostTerminalSwitch(pRing, TerminalId); + Status = (int)_WriteBlocking(pRing, s, (FragLen < (Avail - 4u)) ? FragLen : (Avail - 4u)); + _PostTerminalSwitch(pRing, _ActiveTerminal); + } + break; + case SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL: + // + // If we are in blocking mode, output everything. + // + _PostTerminalSwitch(pRing, TerminalId); + Status = (int)_WriteBlocking(pRing, s, FragLen); + _PostTerminalSwitch(pRing, _ActiveTerminal); + break; + default: + Status = -1; + break; + } + // + // Finish up. + // + SEGGER_RTT_UNLOCK(); + } else { + Status = -1; + } + return Status; +} + +/********************************************************************* +* +* SEGGER_RTT_GetAvailWriteSpace +* +* Function description +* Returns the number of bytes available in the ring buffer. +* +* Parameters +* BufferIndex Index of the up buffer. +* +* Return value +* Number of bytes that are free in the selected up buffer. +*/ +unsigned SEGGER_RTT_GetAvailWriteSpace (unsigned BufferIndex) { + SEGGER_RTT_BUFFER_UP* pRing; + + pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + return _GetAvailWriteSpace(pRing); +} + + +/********************************************************************* +* +* SEGGER_RTT_GetBytesInBuffer() +* +* Function description +* Returns the number of bytes currently used in the up buffer. +* +* Parameters +* BufferIndex Index of the up buffer. +* +* Return value +* Number of bytes that are used in the buffer. +*/ +unsigned SEGGER_RTT_GetBytesInBuffer(unsigned BufferIndex) { + unsigned RdOff; + unsigned WrOff; + unsigned r; + volatile SEGGER_RTT_CB* pRTTCB; + // + // Avoid warnings regarding volatile access order. It's not a problem + // in this case, but dampen compiler enthusiasm. + // + pRTTCB = (volatile SEGGER_RTT_CB*)((unsigned char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + RdOff = pRTTCB->aUp[BufferIndex].RdOff; + WrOff = pRTTCB->aUp[BufferIndex].WrOff; + if (RdOff <= WrOff) { + r = WrOff - RdOff; + } else { + r = pRTTCB->aUp[BufferIndex].SizeOfBuffer - (WrOff - RdOff); + } + return r; +} + +/*************************** End of file ****************************/ diff --git a/core/embed/segger/SEGGER/SEGGER_RTT.h b/core/embed/segger/SEGGER/SEGGER_RTT.h index ebe7e480c2..f4115f6491 100644 --- a/core/embed/segger/SEGGER/SEGGER_RTT.h +++ b/core/embed/segger/SEGGER/SEGGER_RTT.h @@ -1,418 +1,418 @@ -/********************************************************************* -* SEGGER Microcontroller GmbH * -* The Embedded Experts * -********************************************************************** -* * -* (c) 1995 - 2019 SEGGER Microcontroller GmbH * -* * -* www.segger.com Support: support@segger.com * -* * -********************************************************************** -* * -* SEGGER SystemView * Real-time application analysis * -* * -********************************************************************** -* * -* All rights reserved. * -* * -* SEGGER strongly recommends to not make any changes * -* to or modify the source code of this software in order to stay * -* compatible with the SystemView and RTT protocol, and J-Link. * -* * -* Redistribution and use in source and binary forms, with or * -* without modification, are permitted provided that the following * -* condition is met: * -* * -* o Redistributions of source code must retain the above copyright * -* notice, this condition and the following disclaimer. * -* * -* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND * -* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * -* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * -* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * -* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR * -* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * -* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * -* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * -* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * -* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * -* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE * -* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH * -* DAMAGE. * -* * -********************************************************************** -* * -* SystemView version: 3.20 * -* * -********************************************************************** ----------------------------END-OF-HEADER------------------------------ -File : SEGGER_RTT.h -Purpose : Implementation of SEGGER real-time transfer which allows - real-time communication on targets which support debugger - memory accesses while the CPU is running. -Revision: $Rev: 20869 $ ----------------------------------------------------------------------- -*/ - -#ifndef SEGGER_RTT_H -#define SEGGER_RTT_H - -#include "SEGGER_RTT_Conf.h" - -/********************************************************************* -* -* Defines, defaults -* -********************************************************************** -*/ -#ifndef RTT_USE_ASM - #if (defined __SES_ARM) // SEGGER Embedded Studio - #define _CC_HAS_RTT_ASM_SUPPORT 1 - #elif (defined __CROSSWORKS_ARM) // Rowley Crossworks - #define _CC_HAS_RTT_ASM_SUPPORT 1 - #elif (defined __ARMCC_VERSION) // ARM compiler - #if (__ARMCC_VERSION >= 6000000) // ARM compiler V6.0 and later is clang based - #define _CC_HAS_RTT_ASM_SUPPORT 1 - #else - #define _CC_HAS_RTT_ASM_SUPPORT 0 - #endif - #elif (defined __GNUC__) // GCC - #define _CC_HAS_RTT_ASM_SUPPORT 1 - #elif (defined __clang__) // Clang compiler - #define _CC_HAS_RTT_ASM_SUPPORT 1 - #elif ((defined __IASMARM__) || (defined __ICCARM__)) // IAR assembler/compiler - #define _CC_HAS_RTT_ASM_SUPPORT 1 - #else - #define _CC_HAS_RTT_ASM_SUPPORT 0 - #endif - #if ((defined __IASMARM__) || (defined __ICCARM__)) // IAR assembler/compiler - // - // IAR assembler / compiler - // - #if (__VER__ < 6300000) - #define VOLATILE - #else - #define VOLATILE volatile - #endif - #if (defined __ARM7M__) // Needed for old versions that do not know the define yet - #if (__CORE__ == __ARM7M__) // Cortex-M3 - #define _CORE_HAS_RTT_ASM_SUPPORT 1 - #endif - #endif - #if (defined __ARM7EM__) // Needed for old versions that do not know the define yet - #if (__CORE__ == __ARM7EM__) // Cortex-M4/M7 - #define _CORE_HAS_RTT_ASM_SUPPORT 1 - #define _CORE_NEEDS_DMB 1 - #define RTT__DMB() asm VOLATILE ("DMB"); - #endif - #endif - #if (defined __ARM8M_BASELINE__) // Needed for old versions that do not know the define yet - #if (__CORE__ == __ARM8M_BASELINE__) // Cortex-M23 - #define _CORE_HAS_RTT_ASM_SUPPORT 0 - #define _CORE_NEEDS_DMB 1 - #define RTT__DMB() asm VOLATILE ("DMB"); - #endif - #endif - #if (defined __ARM8M_MAINLINE__) // Needed for old versions that do not know the define yet - #if (__CORE__ == __ARM8M_MAINLINE__) // Cortex-M33 - #define _CORE_HAS_RTT_ASM_SUPPORT 1 - #define _CORE_NEEDS_DMB 1 - #define RTT__DMB() asm VOLATILE ("DMB"); - #endif - #endif - #else - // - // GCC / Clang - // - #if (defined __ARM_ARCH_7M__) // Cortex-M3 - #define _CORE_HAS_RTT_ASM_SUPPORT 1 - #elif (defined __ARM_ARCH_7EM__) // Cortex-M4/M7 - #define _CORE_HAS_RTT_ASM_SUPPORT 1 - #define _CORE_NEEDS_DMB 1 - #define RTT__DMB() __asm volatile ("dmb\n" : : :); - #elif (defined __ARM_ARCH_8M_BASE__) // Cortex-M23 - #define _CORE_HAS_RTT_ASM_SUPPORT 0 - #define _CORE_NEEDS_DMB 1 - #define RTT__DMB() __asm volatile ("dmb\n" : : :); - #elif (defined __ARM_ARCH_8M_MAIN__) // Cortex-M33 - #define _CORE_HAS_RTT_ASM_SUPPORT 1 - #define _CORE_NEEDS_DMB 1 - #define RTT__DMB() __asm volatile ("dmb\n" : : :); - #else - #define _CORE_HAS_RTT_ASM_SUPPORT 0 - #endif - #endif - // - // If IDE and core support the ASM version, enable ASM version by default - // - #ifndef _CORE_HAS_RTT_ASM_SUPPORT - #define _CORE_HAS_RTT_ASM_SUPPORT 0 // Default for unknown cores - #endif - #if (_CC_HAS_RTT_ASM_SUPPORT && _CORE_HAS_RTT_ASM_SUPPORT) - #define RTT_USE_ASM (1) - #else - #define RTT_USE_ASM (0) - #endif -#endif - -// -// We need to know if a DMB is needed to make sure that on Cortex-M7 etc. -// the order of accesses to the ring buffers is guaranteed -// Needed for: Cortex-M7, Cortex-M23, Cortex-M33 -// -#ifndef _CORE_NEEDS_DMB - #define _CORE_NEEDS_DMB 0 -#endif - -#ifndef RTT__DMB - #if _CORE_NEEDS_DMB - #error "Don't know how to place inline assembly for DMB" - #else - #define RTT__DMB() - #endif -#endif - -#ifndef SEGGER_RTT_CPU_CACHE_LINE_SIZE - #define SEGGER_RTT_CPU_CACHE_LINE_SIZE (0) // On most target systems where RTT is used, we do not have a CPU cache, therefore 0 is a good default here -#endif - -#ifndef SEGGER_RTT_UNCACHED_OFF - #if SEGGER_RTT_CPU_CACHE_LINE_SIZE - #error "SEGGER_RTT_UNCACHED_OFF must be defined when setting SEGGER_RTT_CPU_CACHE_LINE_SIZE != 0" - #else - #define SEGGER_RTT_UNCACHED_OFF (0) - #endif -#endif -#if RTT_USE_ASM - #if SEGGER_RTT_CPU_CACHE_LINE_SIZE - #error "RTT_USE_ASM is not available if SEGGER_RTT_CPU_CACHE_LINE_SIZE != 0" - #endif -#endif - -#ifndef SEGGER_RTT_ASM // defined when SEGGER_RTT.h is included from assembly file -#include -#include - -/********************************************************************* -* -* Defines, fixed -* -********************************************************************** -*/ - -// -// Determine how much we must pad the control block to make it a multiple of a cache line in size -// Assuming: U8 = 1B -// U16 = 2B -// U32 = 4B -// U8/U16/U32* = 4B -// -#if SEGGER_RTT_CPU_CACHE_LINE_SIZE // Avoid division by zero in case we do not have any cache - #define SEGGER_RTT__ROUND_UP_2_CACHE_LINE_SIZE(NumBytes) (((NumBytes + SEGGER_RTT_CPU_CACHE_LINE_SIZE - 1) / SEGGER_RTT_CPU_CACHE_LINE_SIZE) * SEGGER_RTT_CPU_CACHE_LINE_SIZE) -#else - #define SEGGER_RTT__ROUND_UP_2_CACHE_LINE_SIZE(NumBytes) (NumBytes) -#endif -#define SEGGER_RTT__CB_SIZE (16 + 4 + 4 + (SEGGER_RTT_MAX_NUM_UP_BUFFERS * 24) + (SEGGER_RTT_MAX_NUM_DOWN_BUFFERS * 24)) -#define SEGGER_RTT__CB_PADDING (SEGGER_RTT__ROUND_UP_2_CACHE_LINE_SIZE(SEGGER_RTT__CB_SIZE) - SEGGER_RTT__CB_SIZE) - -/********************************************************************* -* -* Types -* -********************************************************************** -*/ - -// -// Description for a circular buffer (also called "ring buffer") -// which is used as up-buffer (T->H) -// -typedef struct { - const char* sName; // Optional name. Standard names so far are: "Terminal", "SysView", "J-Scope_t4i4" - char* pBuffer; // Pointer to start of buffer - unsigned SizeOfBuffer; // Buffer size in bytes. Note that one byte is lost, as this implementation does not fill up the buffer in order to avoid the problem of being unable to distinguish between full and empty. - unsigned WrOff; // Position of next item to be written by either target. - volatile unsigned RdOff; // Position of next item to be read by host. Must be volatile since it may be modified by host. - unsigned Flags; // Contains configuration flags -} SEGGER_RTT_BUFFER_UP; - -// -// Description for a circular buffer (also called "ring buffer") -// which is used as down-buffer (H->T) -// -typedef struct { - const char* sName; // Optional name. Standard names so far are: "Terminal", "SysView", "J-Scope_t4i4" - char* pBuffer; // Pointer to start of buffer - unsigned SizeOfBuffer; // Buffer size in bytes. Note that one byte is lost, as this implementation does not fill up the buffer in order to avoid the problem of being unable to distinguish between full and empty. - volatile unsigned WrOff; // Position of next item to be written by host. Must be volatile since it may be modified by host. - unsigned RdOff; // Position of next item to be read by target (down-buffer). - unsigned Flags; // Contains configuration flags -} SEGGER_RTT_BUFFER_DOWN; - -// -// RTT control block which describes the number of buffers available -// as well as the configuration for each buffer -// -// -typedef struct { - char acID[16]; // Initialized to "SEGGER RTT" - int MaxNumUpBuffers; // Initialized to SEGGER_RTT_MAX_NUM_UP_BUFFERS (type. 2) - int MaxNumDownBuffers; // Initialized to SEGGER_RTT_MAX_NUM_DOWN_BUFFERS (type. 2) - SEGGER_RTT_BUFFER_UP aUp[SEGGER_RTT_MAX_NUM_UP_BUFFERS]; // Up buffers, transferring information up from target via debug probe to host - SEGGER_RTT_BUFFER_DOWN aDown[SEGGER_RTT_MAX_NUM_DOWN_BUFFERS]; // Down buffers, transferring information down from host via debug probe to target -#if SEGGER_RTT__CB_PADDING - unsigned char aDummy[SEGGER_RTT__CB_PADDING]; -#endif -} SEGGER_RTT_CB; - -/********************************************************************* -* -* Global data -* -********************************************************************** -*/ -extern SEGGER_RTT_CB _SEGGER_RTT; - -/********************************************************************* -* -* RTT API functions -* -********************************************************************** -*/ -#ifdef __cplusplus - extern "C" { -#endif -int SEGGER_RTT_AllocDownBuffer (const char* sName, void* pBuffer, unsigned BufferSize, unsigned Flags); -int SEGGER_RTT_AllocUpBuffer (const char* sName, void* pBuffer, unsigned BufferSize, unsigned Flags); -int SEGGER_RTT_ConfigUpBuffer (unsigned BufferIndex, const char* sName, void* pBuffer, unsigned BufferSize, unsigned Flags); -int SEGGER_RTT_ConfigDownBuffer (unsigned BufferIndex, const char* sName, void* pBuffer, unsigned BufferSize, unsigned Flags); -int SEGGER_RTT_GetKey (void); -unsigned SEGGER_RTT_HasData (unsigned BufferIndex); -int SEGGER_RTT_HasKey (void); -unsigned SEGGER_RTT_HasDataUp (unsigned BufferIndex); -void SEGGER_RTT_Init (void); -unsigned SEGGER_RTT_Read (unsigned BufferIndex, void* pBuffer, unsigned BufferSize); -unsigned SEGGER_RTT_ReadNoLock (unsigned BufferIndex, void* pData, unsigned BufferSize); -int SEGGER_RTT_SetNameDownBuffer (unsigned BufferIndex, const char* sName); -int SEGGER_RTT_SetNameUpBuffer (unsigned BufferIndex, const char* sName); -int SEGGER_RTT_SetFlagsDownBuffer (unsigned BufferIndex, unsigned Flags); -int SEGGER_RTT_SetFlagsUpBuffer (unsigned BufferIndex, unsigned Flags); -int SEGGER_RTT_WaitKey (void); -unsigned SEGGER_RTT_Write (unsigned BufferIndex, const void* pBuffer, unsigned NumBytes); -unsigned SEGGER_RTT_WriteNoLock (unsigned BufferIndex, const void* pBuffer, unsigned NumBytes); -unsigned SEGGER_RTT_WriteSkipNoLock (unsigned BufferIndex, const void* pBuffer, unsigned NumBytes); -unsigned SEGGER_RTT_ASM_WriteSkipNoLock (unsigned BufferIndex, const void* pBuffer, unsigned NumBytes); -unsigned SEGGER_RTT_WriteString (unsigned BufferIndex, const char* s); -void SEGGER_RTT_WriteWithOverwriteNoLock(unsigned BufferIndex, const void* pBuffer, unsigned NumBytes); -unsigned SEGGER_RTT_PutChar (unsigned BufferIndex, char c); -unsigned SEGGER_RTT_PutCharSkip (unsigned BufferIndex, char c); -unsigned SEGGER_RTT_PutCharSkipNoLock (unsigned BufferIndex, char c); -unsigned SEGGER_RTT_GetAvailWriteSpace (unsigned BufferIndex); -unsigned SEGGER_RTT_GetBytesInBuffer (unsigned BufferIndex); -// -// Function macro for performance optimization -// -#define SEGGER_RTT_HASDATA(n) (((SEGGER_RTT_BUFFER_DOWN*)((char*)&_SEGGER_RTT.aDown[n] + SEGGER_RTT_UNCACHED_OFF))->WrOff - ((SEGGER_RTT_BUFFER_DOWN*)((char*)&_SEGGER_RTT.aDown[n] + SEGGER_RTT_UNCACHED_OFF))->RdOff) - -#if RTT_USE_ASM - #define SEGGER_RTT_WriteSkipNoLock SEGGER_RTT_ASM_WriteSkipNoLock -#endif - -/********************************************************************* -* -* RTT transfer functions to send RTT data via other channels. -* -********************************************************************** -*/ -unsigned SEGGER_RTT_ReadUpBuffer (unsigned BufferIndex, void* pBuffer, unsigned BufferSize); -unsigned SEGGER_RTT_ReadUpBufferNoLock (unsigned BufferIndex, void* pData, unsigned BufferSize); -unsigned SEGGER_RTT_WriteDownBuffer (unsigned BufferIndex, const void* pBuffer, unsigned NumBytes); -unsigned SEGGER_RTT_WriteDownBufferNoLock (unsigned BufferIndex, const void* pBuffer, unsigned NumBytes); - -#define SEGGER_RTT_HASDATA_UP(n) (((SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[n] + SEGGER_RTT_UNCACHED_OFF))->WrOff - ((SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[n] + SEGGER_RTT_UNCACHED_OFF))->RdOff) // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly - -/********************************************************************* -* -* RTT "Terminal" API functions -* -********************************************************************** -*/ -int SEGGER_RTT_SetTerminal (unsigned char TerminalId); -int SEGGER_RTT_TerminalOut (unsigned char TerminalId, const char* s); - -/********************************************************************* -* -* RTT printf functions (require SEGGER_RTT_printf.c) -* -********************************************************************** -*/ -int SEGGER_RTT_printf(unsigned BufferIndex, const char * sFormat, ...); -int SEGGER_RTT_vprintf(unsigned BufferIndex, const char * sFormat, va_list * pParamList); - -#ifdef __cplusplus - } -#endif - -#endif // ifndef(SEGGER_RTT_ASM) - -/********************************************************************* -* -* Defines -* -********************************************************************** -*/ - -// -// Operating modes. Define behavior if buffer is full (not enough space for entire message) -// -#define SEGGER_RTT_MODE_NO_BLOCK_SKIP (0) // Skip. Do not block, output nothing. (Default) -#define SEGGER_RTT_MODE_NO_BLOCK_TRIM (1) // Trim: Do not block, output as much as fits. -#define SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL (2) // Block: Wait until there is space in the buffer. -#define SEGGER_RTT_MODE_MASK (3) - -// -// Control sequences, based on ANSI. -// Can be used to control color, and clear the screen -// -#define RTT_CTRL_RESET "\x1B[0m" // Reset to default colors -#define RTT_CTRL_CLEAR "\x1B[2J" // Clear screen, reposition cursor to top left - -#define RTT_CTRL_TEXT_BLACK "\x1B[2;30m" -#define RTT_CTRL_TEXT_RED "\x1B[2;31m" -#define RTT_CTRL_TEXT_GREEN "\x1B[2;32m" -#define RTT_CTRL_TEXT_YELLOW "\x1B[2;33m" -#define RTT_CTRL_TEXT_BLUE "\x1B[2;34m" -#define RTT_CTRL_TEXT_MAGENTA "\x1B[2;35m" -#define RTT_CTRL_TEXT_CYAN "\x1B[2;36m" -#define RTT_CTRL_TEXT_WHITE "\x1B[2;37m" - -#define RTT_CTRL_TEXT_BRIGHT_BLACK "\x1B[1;30m" -#define RTT_CTRL_TEXT_BRIGHT_RED "\x1B[1;31m" -#define RTT_CTRL_TEXT_BRIGHT_GREEN "\x1B[1;32m" -#define RTT_CTRL_TEXT_BRIGHT_YELLOW "\x1B[1;33m" -#define RTT_CTRL_TEXT_BRIGHT_BLUE "\x1B[1;34m" -#define RTT_CTRL_TEXT_BRIGHT_MAGENTA "\x1B[1;35m" -#define RTT_CTRL_TEXT_BRIGHT_CYAN "\x1B[1;36m" -#define RTT_CTRL_TEXT_BRIGHT_WHITE "\x1B[1;37m" - -#define RTT_CTRL_BG_BLACK "\x1B[24;40m" -#define RTT_CTRL_BG_RED "\x1B[24;41m" -#define RTT_CTRL_BG_GREEN "\x1B[24;42m" -#define RTT_CTRL_BG_YELLOW "\x1B[24;43m" -#define RTT_CTRL_BG_BLUE "\x1B[24;44m" -#define RTT_CTRL_BG_MAGENTA "\x1B[24;45m" -#define RTT_CTRL_BG_CYAN "\x1B[24;46m" -#define RTT_CTRL_BG_WHITE "\x1B[24;47m" - -#define RTT_CTRL_BG_BRIGHT_BLACK "\x1B[4;40m" -#define RTT_CTRL_BG_BRIGHT_RED "\x1B[4;41m" -#define RTT_CTRL_BG_BRIGHT_GREEN "\x1B[4;42m" -#define RTT_CTRL_BG_BRIGHT_YELLOW "\x1B[4;43m" -#define RTT_CTRL_BG_BRIGHT_BLUE "\x1B[4;44m" -#define RTT_CTRL_BG_BRIGHT_MAGENTA "\x1B[4;45m" -#define RTT_CTRL_BG_BRIGHT_CYAN "\x1B[4;46m" -#define RTT_CTRL_BG_BRIGHT_WHITE "\x1B[4;47m" - - -#endif - -/*************************** End of file ****************************/ +/********************************************************************* +* SEGGER Microcontroller GmbH * +* The Embedded Experts * +********************************************************************** +* * +* (c) 1995 - 2019 SEGGER Microcontroller GmbH * +* * +* www.segger.com Support: support@segger.com * +* * +********************************************************************** +* * +* SEGGER SystemView * Real-time application analysis * +* * +********************************************************************** +* * +* All rights reserved. * +* * +* SEGGER strongly recommends to not make any changes * +* to or modify the source code of this software in order to stay * +* compatible with the SystemView and RTT protocol, and J-Link. * +* * +* Redistribution and use in source and binary forms, with or * +* without modification, are permitted provided that the following * +* condition is met: * +* * +* o Redistributions of source code must retain the above copyright * +* notice, this condition and the following disclaimer. * +* * +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND * +* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * +* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * +* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * +* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR * +* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * +* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * +* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * +* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * +* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE * +* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH * +* DAMAGE. * +* * +********************************************************************** +* * +* SystemView version: 3.20 * +* * +********************************************************************** +---------------------------END-OF-HEADER------------------------------ +File : SEGGER_RTT.h +Purpose : Implementation of SEGGER real-time transfer which allows + real-time communication on targets which support debugger + memory accesses while the CPU is running. +Revision: $Rev: 20869 $ +---------------------------------------------------------------------- +*/ + +#ifndef SEGGER_RTT_H +#define SEGGER_RTT_H + +#include "SEGGER_RTT_Conf.h" + +/********************************************************************* +* +* Defines, defaults +* +********************************************************************** +*/ +#ifndef RTT_USE_ASM + #if (defined __SES_ARM) // SEGGER Embedded Studio + #define _CC_HAS_RTT_ASM_SUPPORT 1 + #elif (defined __CROSSWORKS_ARM) // Rowley Crossworks + #define _CC_HAS_RTT_ASM_SUPPORT 1 + #elif (defined __ARMCC_VERSION) // ARM compiler + #if (__ARMCC_VERSION >= 6000000) // ARM compiler V6.0 and later is clang based + #define _CC_HAS_RTT_ASM_SUPPORT 1 + #else + #define _CC_HAS_RTT_ASM_SUPPORT 0 + #endif + #elif (defined __GNUC__) // GCC + #define _CC_HAS_RTT_ASM_SUPPORT 1 + #elif (defined __clang__) // Clang compiler + #define _CC_HAS_RTT_ASM_SUPPORT 1 + #elif ((defined __IASMARM__) || (defined __ICCARM__)) // IAR assembler/compiler + #define _CC_HAS_RTT_ASM_SUPPORT 1 + #else + #define _CC_HAS_RTT_ASM_SUPPORT 0 + #endif + #if ((defined __IASMARM__) || (defined __ICCARM__)) // IAR assembler/compiler + // + // IAR assembler / compiler + // + #if (__VER__ < 6300000) + #define VOLATILE + #else + #define VOLATILE volatile + #endif + #if (defined __ARM7M__) // Needed for old versions that do not know the define yet + #if (__CORE__ == __ARM7M__) // Cortex-M3 + #define _CORE_HAS_RTT_ASM_SUPPORT 1 + #endif + #endif + #if (defined __ARM7EM__) // Needed for old versions that do not know the define yet + #if (__CORE__ == __ARM7EM__) // Cortex-M4/M7 + #define _CORE_HAS_RTT_ASM_SUPPORT 1 + #define _CORE_NEEDS_DMB 1 + #define RTT__DMB() asm VOLATILE ("DMB"); + #endif + #endif + #if (defined __ARM8M_BASELINE__) // Needed for old versions that do not know the define yet + #if (__CORE__ == __ARM8M_BASELINE__) // Cortex-M23 + #define _CORE_HAS_RTT_ASM_SUPPORT 0 + #define _CORE_NEEDS_DMB 1 + #define RTT__DMB() asm VOLATILE ("DMB"); + #endif + #endif + #if (defined __ARM8M_MAINLINE__) // Needed for old versions that do not know the define yet + #if (__CORE__ == __ARM8M_MAINLINE__) // Cortex-M33 + #define _CORE_HAS_RTT_ASM_SUPPORT 1 + #define _CORE_NEEDS_DMB 1 + #define RTT__DMB() asm VOLATILE ("DMB"); + #endif + #endif + #else + // + // GCC / Clang + // + #if (defined __ARM_ARCH_7M__) // Cortex-M3 + #define _CORE_HAS_RTT_ASM_SUPPORT 1 + #elif (defined __ARM_ARCH_7EM__) // Cortex-M4/M7 + #define _CORE_HAS_RTT_ASM_SUPPORT 1 + #define _CORE_NEEDS_DMB 1 + #define RTT__DMB() __asm volatile ("dmb\n" : : :); + #elif (defined __ARM_ARCH_8M_BASE__) // Cortex-M23 + #define _CORE_HAS_RTT_ASM_SUPPORT 0 + #define _CORE_NEEDS_DMB 1 + #define RTT__DMB() __asm volatile ("dmb\n" : : :); + #elif (defined __ARM_ARCH_8M_MAIN__) // Cortex-M33 + #define _CORE_HAS_RTT_ASM_SUPPORT 1 + #define _CORE_NEEDS_DMB 1 + #define RTT__DMB() __asm volatile ("dmb\n" : : :); + #else + #define _CORE_HAS_RTT_ASM_SUPPORT 0 + #endif + #endif + // + // If IDE and core support the ASM version, enable ASM version by default + // + #ifndef _CORE_HAS_RTT_ASM_SUPPORT + #define _CORE_HAS_RTT_ASM_SUPPORT 0 // Default for unknown cores + #endif + #if (_CC_HAS_RTT_ASM_SUPPORT && _CORE_HAS_RTT_ASM_SUPPORT) + #define RTT_USE_ASM (1) + #else + #define RTT_USE_ASM (0) + #endif +#endif + +// +// We need to know if a DMB is needed to make sure that on Cortex-M7 etc. +// the order of accesses to the ring buffers is guaranteed +// Needed for: Cortex-M7, Cortex-M23, Cortex-M33 +// +#ifndef _CORE_NEEDS_DMB + #define _CORE_NEEDS_DMB 0 +#endif + +#ifndef RTT__DMB + #if _CORE_NEEDS_DMB + #error "Don't know how to place inline assembly for DMB" + #else + #define RTT__DMB() + #endif +#endif + +#ifndef SEGGER_RTT_CPU_CACHE_LINE_SIZE + #define SEGGER_RTT_CPU_CACHE_LINE_SIZE (0) // On most target systems where RTT is used, we do not have a CPU cache, therefore 0 is a good default here +#endif + +#ifndef SEGGER_RTT_UNCACHED_OFF + #if SEGGER_RTT_CPU_CACHE_LINE_SIZE + #error "SEGGER_RTT_UNCACHED_OFF must be defined when setting SEGGER_RTT_CPU_CACHE_LINE_SIZE != 0" + #else + #define SEGGER_RTT_UNCACHED_OFF (0) + #endif +#endif +#if RTT_USE_ASM + #if SEGGER_RTT_CPU_CACHE_LINE_SIZE + #error "RTT_USE_ASM is not available if SEGGER_RTT_CPU_CACHE_LINE_SIZE != 0" + #endif +#endif + +#ifndef SEGGER_RTT_ASM // defined when SEGGER_RTT.h is included from assembly file +#include +#include + +/********************************************************************* +* +* Defines, fixed +* +********************************************************************** +*/ + +// +// Determine how much we must pad the control block to make it a multiple of a cache line in size +// Assuming: U8 = 1B +// U16 = 2B +// U32 = 4B +// U8/U16/U32* = 4B +// +#if SEGGER_RTT_CPU_CACHE_LINE_SIZE // Avoid division by zero in case we do not have any cache + #define SEGGER_RTT__ROUND_UP_2_CACHE_LINE_SIZE(NumBytes) (((NumBytes + SEGGER_RTT_CPU_CACHE_LINE_SIZE - 1) / SEGGER_RTT_CPU_CACHE_LINE_SIZE) * SEGGER_RTT_CPU_CACHE_LINE_SIZE) +#else + #define SEGGER_RTT__ROUND_UP_2_CACHE_LINE_SIZE(NumBytes) (NumBytes) +#endif +#define SEGGER_RTT__CB_SIZE (16 + 4 + 4 + (SEGGER_RTT_MAX_NUM_UP_BUFFERS * 24) + (SEGGER_RTT_MAX_NUM_DOWN_BUFFERS * 24)) +#define SEGGER_RTT__CB_PADDING (SEGGER_RTT__ROUND_UP_2_CACHE_LINE_SIZE(SEGGER_RTT__CB_SIZE) - SEGGER_RTT__CB_SIZE) + +/********************************************************************* +* +* Types +* +********************************************************************** +*/ + +// +// Description for a circular buffer (also called "ring buffer") +// which is used as up-buffer (T->H) +// +typedef struct { + const char* sName; // Optional name. Standard names so far are: "Terminal", "SysView", "J-Scope_t4i4" + char* pBuffer; // Pointer to start of buffer + unsigned SizeOfBuffer; // Buffer size in bytes. Note that one byte is lost, as this implementation does not fill up the buffer in order to avoid the problem of being unable to distinguish between full and empty. + unsigned WrOff; // Position of next item to be written by either target. + volatile unsigned RdOff; // Position of next item to be read by host. Must be volatile since it may be modified by host. + unsigned Flags; // Contains configuration flags +} SEGGER_RTT_BUFFER_UP; + +// +// Description for a circular buffer (also called "ring buffer") +// which is used as down-buffer (H->T) +// +typedef struct { + const char* sName; // Optional name. Standard names so far are: "Terminal", "SysView", "J-Scope_t4i4" + char* pBuffer; // Pointer to start of buffer + unsigned SizeOfBuffer; // Buffer size in bytes. Note that one byte is lost, as this implementation does not fill up the buffer in order to avoid the problem of being unable to distinguish between full and empty. + volatile unsigned WrOff; // Position of next item to be written by host. Must be volatile since it may be modified by host. + unsigned RdOff; // Position of next item to be read by target (down-buffer). + unsigned Flags; // Contains configuration flags +} SEGGER_RTT_BUFFER_DOWN; + +// +// RTT control block which describes the number of buffers available +// as well as the configuration for each buffer +// +// +typedef struct { + char acID[16]; // Initialized to "SEGGER RTT" + int MaxNumUpBuffers; // Initialized to SEGGER_RTT_MAX_NUM_UP_BUFFERS (type. 2) + int MaxNumDownBuffers; // Initialized to SEGGER_RTT_MAX_NUM_DOWN_BUFFERS (type. 2) + SEGGER_RTT_BUFFER_UP aUp[SEGGER_RTT_MAX_NUM_UP_BUFFERS]; // Up buffers, transferring information up from target via debug probe to host + SEGGER_RTT_BUFFER_DOWN aDown[SEGGER_RTT_MAX_NUM_DOWN_BUFFERS]; // Down buffers, transferring information down from host via debug probe to target +#if SEGGER_RTT__CB_PADDING + unsigned char aDummy[SEGGER_RTT__CB_PADDING]; +#endif +} SEGGER_RTT_CB; + +/********************************************************************* +* +* Global data +* +********************************************************************** +*/ +extern SEGGER_RTT_CB _SEGGER_RTT; + +/********************************************************************* +* +* RTT API functions +* +********************************************************************** +*/ +#ifdef __cplusplus + extern "C" { +#endif +int SEGGER_RTT_AllocDownBuffer (const char* sName, void* pBuffer, unsigned BufferSize, unsigned Flags); +int SEGGER_RTT_AllocUpBuffer (const char* sName, void* pBuffer, unsigned BufferSize, unsigned Flags); +int SEGGER_RTT_ConfigUpBuffer (unsigned BufferIndex, const char* sName, void* pBuffer, unsigned BufferSize, unsigned Flags); +int SEGGER_RTT_ConfigDownBuffer (unsigned BufferIndex, const char* sName, void* pBuffer, unsigned BufferSize, unsigned Flags); +int SEGGER_RTT_GetKey (void); +unsigned SEGGER_RTT_HasData (unsigned BufferIndex); +int SEGGER_RTT_HasKey (void); +unsigned SEGGER_RTT_HasDataUp (unsigned BufferIndex); +void SEGGER_RTT_Init (void); +unsigned SEGGER_RTT_Read (unsigned BufferIndex, void* pBuffer, unsigned BufferSize); +unsigned SEGGER_RTT_ReadNoLock (unsigned BufferIndex, void* pData, unsigned BufferSize); +int SEGGER_RTT_SetNameDownBuffer (unsigned BufferIndex, const char* sName); +int SEGGER_RTT_SetNameUpBuffer (unsigned BufferIndex, const char* sName); +int SEGGER_RTT_SetFlagsDownBuffer (unsigned BufferIndex, unsigned Flags); +int SEGGER_RTT_SetFlagsUpBuffer (unsigned BufferIndex, unsigned Flags); +int SEGGER_RTT_WaitKey (void); +unsigned SEGGER_RTT_Write (unsigned BufferIndex, const void* pBuffer, unsigned NumBytes); +unsigned SEGGER_RTT_WriteNoLock (unsigned BufferIndex, const void* pBuffer, unsigned NumBytes); +unsigned SEGGER_RTT_WriteSkipNoLock (unsigned BufferIndex, const void* pBuffer, unsigned NumBytes); +unsigned SEGGER_RTT_ASM_WriteSkipNoLock (unsigned BufferIndex, const void* pBuffer, unsigned NumBytes); +unsigned SEGGER_RTT_WriteString (unsigned BufferIndex, const char* s); +void SEGGER_RTT_WriteWithOverwriteNoLock(unsigned BufferIndex, const void* pBuffer, unsigned NumBytes); +unsigned SEGGER_RTT_PutChar (unsigned BufferIndex, char c); +unsigned SEGGER_RTT_PutCharSkip (unsigned BufferIndex, char c); +unsigned SEGGER_RTT_PutCharSkipNoLock (unsigned BufferIndex, char c); +unsigned SEGGER_RTT_GetAvailWriteSpace (unsigned BufferIndex); +unsigned SEGGER_RTT_GetBytesInBuffer (unsigned BufferIndex); +// +// Function macro for performance optimization +// +#define SEGGER_RTT_HASDATA(n) (((SEGGER_RTT_BUFFER_DOWN*)((char*)&_SEGGER_RTT.aDown[n] + SEGGER_RTT_UNCACHED_OFF))->WrOff - ((SEGGER_RTT_BUFFER_DOWN*)((char*)&_SEGGER_RTT.aDown[n] + SEGGER_RTT_UNCACHED_OFF))->RdOff) + +#if RTT_USE_ASM + #define SEGGER_RTT_WriteSkipNoLock SEGGER_RTT_ASM_WriteSkipNoLock +#endif + +/********************************************************************* +* +* RTT transfer functions to send RTT data via other channels. +* +********************************************************************** +*/ +unsigned SEGGER_RTT_ReadUpBuffer (unsigned BufferIndex, void* pBuffer, unsigned BufferSize); +unsigned SEGGER_RTT_ReadUpBufferNoLock (unsigned BufferIndex, void* pData, unsigned BufferSize); +unsigned SEGGER_RTT_WriteDownBuffer (unsigned BufferIndex, const void* pBuffer, unsigned NumBytes); +unsigned SEGGER_RTT_WriteDownBufferNoLock (unsigned BufferIndex, const void* pBuffer, unsigned NumBytes); + +#define SEGGER_RTT_HASDATA_UP(n) (((SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[n] + SEGGER_RTT_UNCACHED_OFF))->WrOff - ((SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[n] + SEGGER_RTT_UNCACHED_OFF))->RdOff) // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + +/********************************************************************* +* +* RTT "Terminal" API functions +* +********************************************************************** +*/ +int SEGGER_RTT_SetTerminal (unsigned char TerminalId); +int SEGGER_RTT_TerminalOut (unsigned char TerminalId, const char* s); + +/********************************************************************* +* +* RTT printf functions (require SEGGER_RTT_printf.c) +* +********************************************************************** +*/ +int SEGGER_RTT_printf(unsigned BufferIndex, const char * sFormat, ...); +int SEGGER_RTT_vprintf(unsigned BufferIndex, const char * sFormat, va_list * pParamList); + +#ifdef __cplusplus + } +#endif + +#endif // ifndef(SEGGER_RTT_ASM) + +/********************************************************************* +* +* Defines +* +********************************************************************** +*/ + +// +// Operating modes. Define behavior if buffer is full (not enough space for entire message) +// +#define SEGGER_RTT_MODE_NO_BLOCK_SKIP (0) // Skip. Do not block, output nothing. (Default) +#define SEGGER_RTT_MODE_NO_BLOCK_TRIM (1) // Trim: Do not block, output as much as fits. +#define SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL (2) // Block: Wait until there is space in the buffer. +#define SEGGER_RTT_MODE_MASK (3) + +// +// Control sequences, based on ANSI. +// Can be used to control color, and clear the screen +// +#define RTT_CTRL_RESET "\x1B[0m" // Reset to default colors +#define RTT_CTRL_CLEAR "\x1B[2J" // Clear screen, reposition cursor to top left + +#define RTT_CTRL_TEXT_BLACK "\x1B[2;30m" +#define RTT_CTRL_TEXT_RED "\x1B[2;31m" +#define RTT_CTRL_TEXT_GREEN "\x1B[2;32m" +#define RTT_CTRL_TEXT_YELLOW "\x1B[2;33m" +#define RTT_CTRL_TEXT_BLUE "\x1B[2;34m" +#define RTT_CTRL_TEXT_MAGENTA "\x1B[2;35m" +#define RTT_CTRL_TEXT_CYAN "\x1B[2;36m" +#define RTT_CTRL_TEXT_WHITE "\x1B[2;37m" + +#define RTT_CTRL_TEXT_BRIGHT_BLACK "\x1B[1;30m" +#define RTT_CTRL_TEXT_BRIGHT_RED "\x1B[1;31m" +#define RTT_CTRL_TEXT_BRIGHT_GREEN "\x1B[1;32m" +#define RTT_CTRL_TEXT_BRIGHT_YELLOW "\x1B[1;33m" +#define RTT_CTRL_TEXT_BRIGHT_BLUE "\x1B[1;34m" +#define RTT_CTRL_TEXT_BRIGHT_MAGENTA "\x1B[1;35m" +#define RTT_CTRL_TEXT_BRIGHT_CYAN "\x1B[1;36m" +#define RTT_CTRL_TEXT_BRIGHT_WHITE "\x1B[1;37m" + +#define RTT_CTRL_BG_BLACK "\x1B[24;40m" +#define RTT_CTRL_BG_RED "\x1B[24;41m" +#define RTT_CTRL_BG_GREEN "\x1B[24;42m" +#define RTT_CTRL_BG_YELLOW "\x1B[24;43m" +#define RTT_CTRL_BG_BLUE "\x1B[24;44m" +#define RTT_CTRL_BG_MAGENTA "\x1B[24;45m" +#define RTT_CTRL_BG_CYAN "\x1B[24;46m" +#define RTT_CTRL_BG_WHITE "\x1B[24;47m" + +#define RTT_CTRL_BG_BRIGHT_BLACK "\x1B[4;40m" +#define RTT_CTRL_BG_BRIGHT_RED "\x1B[4;41m" +#define RTT_CTRL_BG_BRIGHT_GREEN "\x1B[4;42m" +#define RTT_CTRL_BG_BRIGHT_YELLOW "\x1B[4;43m" +#define RTT_CTRL_BG_BRIGHT_BLUE "\x1B[4;44m" +#define RTT_CTRL_BG_BRIGHT_MAGENTA "\x1B[4;45m" +#define RTT_CTRL_BG_BRIGHT_CYAN "\x1B[4;46m" +#define RTT_CTRL_BG_BRIGHT_WHITE "\x1B[4;47m" + + +#endif + +/*************************** End of file ****************************/ diff --git a/core/embed/segger/SEGGER/SEGGER_RTT_ASM_ARMv7M.S b/core/embed/segger/SEGGER/SEGGER_RTT_ASM_ARMv7M.S index e3579db0a2..85c79899ef 100644 --- a/core/embed/segger/SEGGER/SEGGER_RTT_ASM_ARMv7M.S +++ b/core/embed/segger/SEGGER/SEGGER_RTT_ASM_ARMv7M.S @@ -1,242 +1,242 @@ -/********************************************************************* -* (c) SEGGER Microcontroller GmbH * -* The Embedded Experts * -* www.segger.com * -********************************************************************** - --------------------------- END-OF-HEADER ----------------------------- - -File : SEGGER_RTT_ASM_ARMv7M.S -Purpose : Assembler implementation of RTT functions for ARMv7M - -Additional information: - This module is written to be assembler-independent and works with - GCC and clang (Embedded Studio) and IAR. -*/ - -#define SEGGER_RTT_ASM // Used to control processed input from header file -#include "SEGGER_RTT.h" - -/********************************************************************* -* -* Defines, fixed -* -********************************************************************** -*/ - -#define _CCIAR 0 -#define _CCCLANG 1 - -#if (defined __SES_ARM) || (defined __GNUC__) || (defined __clang__) - #define _CC_TYPE _CCCLANG - #define _PUB_SYM .global - #define _EXT_SYM .extern - #define _END .end - #define _WEAK .weak - #define _THUMB_FUNC .thumb_func - #define _THUMB_CODE .code 16 - #define _WORD .word - #define _SECTION(Sect, Type, AlignExp) .section Sect ##, "ax" - #define _ALIGN(Exp) .align Exp - #define _PLACE_LITS .ltorg - #define _DATA_SECT_START - #define _C_STARTUP _start - #define _STACK_END __stack_end__ - #define _RAMFUNC - // - // .text => Link to flash - // .fast => Link to RAM - // OtherSect => Usually link to RAM - // Alignment is 2^x - // -#elif defined (__IASMARM__) - #define _CC_TYPE _CCIAR - #define _PUB_SYM PUBLIC - #define _EXT_SYM EXTERN - #define _END END - #define _WEAK _WEAK - #define _THUMB_FUNC - #define _THUMB_CODE THUMB - #define _WORD DCD - #define _SECTION(Sect, Type, AlignExp) SECTION Sect ## : ## Type ## :REORDER:NOROOT ## (AlignExp) - #define _ALIGN(Exp) alignrom Exp - #define _PLACE_LITS - #define _DATA_SECT_START DATA - #define _C_STARTUP __iar_program_start - #define _STACK_END sfe(CSTACK) - #define _RAMFUNC SECTION_TYPE SHT_PROGBITS, SHF_WRITE | SHF_EXECINSTR - // - // .text => Link to flash - // .textrw => Link to RAM - // OtherSect => Usually link to RAM - // NOROOT => Allows linker to throw away the function, if not referenced - // Alignment is 2^x - // -#endif - -#if (_CC_TYPE == _CCIAR) - NAME SEGGER_RTT_ASM_ARMv7M -#else - .syntax unified -#endif - -#if defined (RTT_USE_ASM) && (RTT_USE_ASM == 1) - #define SHT_PROGBITS 0x1 - -/********************************************************************* -* -* Public / external symbols -* -********************************************************************** -*/ - - _EXT_SYM __aeabi_memcpy - _EXT_SYM __aeabi_memcpy4 - _EXT_SYM _SEGGER_RTT - - _PUB_SYM SEGGER_RTT_ASM_WriteSkipNoLock - -/********************************************************************* -* -* SEGGER_RTT_WriteSkipNoLock -* -* Function description -* Stores a specified number of characters in SEGGER RTT -* control block which is then read by the host. -* SEGGER_RTT_WriteSkipNoLock does not lock the application and -* skips all data, if the data does not fit into the buffer. -* -* Parameters -* BufferIndex Index of "Up"-buffer to be used (e.g. 0 for "Terminal"). -* pBuffer Pointer to character array. Does not need to point to a \0 terminated string. -* NumBytes Number of bytes to be stored in the SEGGER RTT control block. -* MUST be > 0!!! -* This is done for performance reasons, so no initial check has do be done. -* -* Return value -* 1: Data has been copied -* 0: No space, data has not been copied -* -* Notes -* (1) If there is not enough space in the "Up"-buffer, all data is dropped. -* (2) For performance reasons this function does not call Init() -* and may only be called after RTT has been initialized. -* Either by calling SEGGER_RTT_Init() or calling another RTT API function first. -*/ - _SECTION(.text, CODE, 2) - _ALIGN(2) - _THUMB_FUNC -SEGGER_RTT_ASM_WriteSkipNoLock: // unsigned SEGGER_RTT_WriteSkipNoLock(unsigned BufferIndex, const void* pData, unsigned NumBytes) { - // - // Cases: - // 1) RdOff <= WrOff => Space until wrap-around is sufficient - // 2) RdOff <= WrOff => Space after wrap-around needed (copy in 2 chunks) - // 3) RdOff < WrOff => No space in buf - // 4) RdOff > WrOff => Space is sufficient - // 5) RdOff > WrOff => No space in buf - // - // 1) is the most common case for large buffers and assuming that J-Link reads the data fast enough - // - // Register usage: - // R0 Temporary needed as RdOff, register later on - // R1 pData - // R2 - // R3 register. Hold free for subroutine calls - // R4 - // R5 pRing->pBuffer - // R6 pRing (Points to active struct SEGGER_RTT_BUFFER_DOWN) - // R7 WrOff - // - PUSH {R4-R7} - ADD R3,R0,R0, LSL #+1 - LDR.W R0,=_SEGGER_RTT // pRing = &_SEGGER_RTT.aUp[BufferIndex]; - ADD R0,R0,R3, LSL #+3 - ADD R6,R0,#+24 - LDR R0,[R6, #+16] // RdOff = pRing->RdOff; - LDR R7,[R6, #+12] // WrOff = pRing->WrOff; - LDR R5,[R6, #+4] // pRing->pBuffer - CMP R7,R0 - BCC.N _CheckCase4 // if (RdOff <= WrOff) { => Case 1), 2) or 3) - // - // Handling for case 1, later on identical to case 4 - // - LDR R3,[R6, #+8] // Avail = pRing->SizeOfBuffer - WrOff - 1u; => Space until wrap-around (assume 1 byte not usable for case that RdOff == 0) - SUBS R4,R3,R7 // (Used in case we jump into case 2 afterwards) - SUBS R3,R4,#+1 // - CMP R3,R2 - BCC.N _CheckCase2 // if (Avail >= NumBytes) { => Case 1)? -_Case4: - ADDS R5,R7,R5 // pBuffer += WrOff - ADDS R0,R2,R7 // v = WrOff + NumBytes - // - // 2x unrolling for the copy loop that is used most of the time - // This is a special optimization for small SystemView packets and makes them even faster - // - _ALIGN(2) -_LoopCopyStraight: // memcpy(pRing->pBuffer + WrOff, pData, NumBytes); - LDRB R3,[R1], #+1 - STRB R3,[R5], #+1 // *pDest++ = *pSrc++ - SUBS R2,R2,#+1 - BEQ _CSDone - LDRB R3,[R1], #+1 - STRB R3,[R5], #+1 // *pDest++ = *pSrc++ - SUBS R2,R2,#+1 - BNE _LoopCopyStraight -_CSDone: -#if _CORE_NEEDS_DMB // Do not slow down cores that do not need a DMB instruction here - DMB // Cortex-M7 may delay memory writes and also change the order in which the writes happen. Therefore, make sure that all buffer writes are finished, before updating the in the struct -#endif - STR R0,[R6, #+12] // pRing->WrOff = WrOff + NumBytes; - MOVS R0,#+1 - POP {R4-R7} - BX LR // Return 1 -_CheckCase2: - ADDS R0,R0,R3 // Avail += RdOff; => Space incl. wrap-around - CMP R0,R2 - BCC.N _Case3 // if (Avail >= NumBytes) { => Case 2? => If not, we have case 3) (does not fit) - // - // Handling for case 2 - // - ADDS R0,R7,R5 // v = pRing->pBuffer + WrOff => Do not change pRing->pBuffer here because 2nd chunk needs org. value - SUBS R2,R2,R4 // NumBytes -= Rem; (Rem = pRing->SizeOfBuffer - WrOff; => Space until end of buffer) -_LoopCopyBeforeWrapAround: // memcpy(pRing->pBuffer + WrOff, pData, Rem); => Copy 1st chunk - LDRB R3,[R1], #+1 - STRB R3,[R0], #+1 // *pDest++ = *pSrc++ - SUBS R4,R4,#+1 - BNE _LoopCopyBeforeWrapAround - // - // Special case: First check that assumed RdOff == 0 calculated that last element before wrap-around could not be used - // But 2nd check (considering space until wrap-around and until RdOff) revealed that RdOff is not 0, so we can use the last element - // In this case, we may use a copy straight until buffer end anyway without needing to copy 2 chunks - // Therefore, check if 2nd memcpy is necessary at all - // - ADDS R4,R2,#+0 // Save (needed as counter in loop but must be written to after the loop). Also use this inst to update the flags to skip 2nd loop if possible - BEQ.N _No2ChunkNeeded // if (NumBytes) { -_LoopCopyAfterWrapAround: // memcpy(pRing->pBuffer, pData + Rem, NumBytes); - LDRB R3,[R1], #+1 // pData already points to the next src byte due to copy loop increment before this loop - STRB R3,[R5], #+1 // *pDest++ = *pSrc++ - SUBS R2,R2,#+1 - BNE _LoopCopyAfterWrapAround -_No2ChunkNeeded: -#if _CORE_NEEDS_DMB // Do not slow down cores that do not need a DMB instruction here - DMB // Cortex-M7 may delay memory writes and also change the order in which the writes happen. Therefore, make sure that all buffer writes are finished, before updating the in the struct -#endif - STR R4,[R6, #+12] // pRing->WrOff = NumBytes; => Must be written after copying data because J-Link may read control block asynchronously while writing into buffer - MOVS R0,#+1 - POP {R4-R7} - BX LR // Return 1 -_CheckCase4: - SUBS R0,R0,R7 - SUBS R0,R0,#+1 // Avail = RdOff - WrOff - 1u; - CMP R0,R2 - BCS.N _Case4 // if (Avail >= NumBytes) { => Case 4) == 1) ? => If not, we have case 5) == 3) (does not fit) -_Case3: - MOVS R0,#+0 - POP {R4-R7} - BX LR // Return 0 - _PLACE_LITS - -#endif // defined (RTT_USE_ASM) && (RTT_USE_ASM == 1) - _END - -/*************************** End of file ****************************/ +/********************************************************************* +* (c) SEGGER Microcontroller GmbH * +* The Embedded Experts * +* www.segger.com * +********************************************************************** + +-------------------------- END-OF-HEADER ----------------------------- + +File : SEGGER_RTT_ASM_ARMv7M.S +Purpose : Assembler implementation of RTT functions for ARMv7M + +Additional information: + This module is written to be assembler-independent and works with + GCC and clang (Embedded Studio) and IAR. +*/ + +#define SEGGER_RTT_ASM // Used to control processed input from header file +#include "SEGGER_RTT.h" + +/********************************************************************* +* +* Defines, fixed +* +********************************************************************** +*/ + +#define _CCIAR 0 +#define _CCCLANG 1 + +#if (defined __SES_ARM) || (defined __GNUC__) || (defined __clang__) + #define _CC_TYPE _CCCLANG + #define _PUB_SYM .global + #define _EXT_SYM .extern + #define _END .end + #define _WEAK .weak + #define _THUMB_FUNC .thumb_func + #define _THUMB_CODE .code 16 + #define _WORD .word + #define _SECTION(Sect, Type, AlignExp) .section Sect ##, "ax" + #define _ALIGN(Exp) .align Exp + #define _PLACE_LITS .ltorg + #define _DATA_SECT_START + #define _C_STARTUP _start + #define _STACK_END __stack_end__ + #define _RAMFUNC + // + // .text => Link to flash + // .fast => Link to RAM + // OtherSect => Usually link to RAM + // Alignment is 2^x + // +#elif defined (__IASMARM__) + #define _CC_TYPE _CCIAR + #define _PUB_SYM PUBLIC + #define _EXT_SYM EXTERN + #define _END END + #define _WEAK _WEAK + #define _THUMB_FUNC + #define _THUMB_CODE THUMB + #define _WORD DCD + #define _SECTION(Sect, Type, AlignExp) SECTION Sect ## : ## Type ## :REORDER:NOROOT ## (AlignExp) + #define _ALIGN(Exp) alignrom Exp + #define _PLACE_LITS + #define _DATA_SECT_START DATA + #define _C_STARTUP __iar_program_start + #define _STACK_END sfe(CSTACK) + #define _RAMFUNC SECTION_TYPE SHT_PROGBITS, SHF_WRITE | SHF_EXECINSTR + // + // .text => Link to flash + // .textrw => Link to RAM + // OtherSect => Usually link to RAM + // NOROOT => Allows linker to throw away the function, if not referenced + // Alignment is 2^x + // +#endif + +#if (_CC_TYPE == _CCIAR) + NAME SEGGER_RTT_ASM_ARMv7M +#else + .syntax unified +#endif + +#if defined (RTT_USE_ASM) && (RTT_USE_ASM == 1) + #define SHT_PROGBITS 0x1 + +/********************************************************************* +* +* Public / external symbols +* +********************************************************************** +*/ + + _EXT_SYM __aeabi_memcpy + _EXT_SYM __aeabi_memcpy4 + _EXT_SYM _SEGGER_RTT + + _PUB_SYM SEGGER_RTT_ASM_WriteSkipNoLock + +/********************************************************************* +* +* SEGGER_RTT_WriteSkipNoLock +* +* Function description +* Stores a specified number of characters in SEGGER RTT +* control block which is then read by the host. +* SEGGER_RTT_WriteSkipNoLock does not lock the application and +* skips all data, if the data does not fit into the buffer. +* +* Parameters +* BufferIndex Index of "Up"-buffer to be used (e.g. 0 for "Terminal"). +* pBuffer Pointer to character array. Does not need to point to a \0 terminated string. +* NumBytes Number of bytes to be stored in the SEGGER RTT control block. +* MUST be > 0!!! +* This is done for performance reasons, so no initial check has do be done. +* +* Return value +* 1: Data has been copied +* 0: No space, data has not been copied +* +* Notes +* (1) If there is not enough space in the "Up"-buffer, all data is dropped. +* (2) For performance reasons this function does not call Init() +* and may only be called after RTT has been initialized. +* Either by calling SEGGER_RTT_Init() or calling another RTT API function first. +*/ + _SECTION(.text, CODE, 2) + _ALIGN(2) + _THUMB_FUNC +SEGGER_RTT_ASM_WriteSkipNoLock: // unsigned SEGGER_RTT_WriteSkipNoLock(unsigned BufferIndex, const void* pData, unsigned NumBytes) { + // + // Cases: + // 1) RdOff <= WrOff => Space until wrap-around is sufficient + // 2) RdOff <= WrOff => Space after wrap-around needed (copy in 2 chunks) + // 3) RdOff < WrOff => No space in buf + // 4) RdOff > WrOff => Space is sufficient + // 5) RdOff > WrOff => No space in buf + // + // 1) is the most common case for large buffers and assuming that J-Link reads the data fast enough + // + // Register usage: + // R0 Temporary needed as RdOff, register later on + // R1 pData + // R2 + // R3 register. Hold free for subroutine calls + // R4 + // R5 pRing->pBuffer + // R6 pRing (Points to active struct SEGGER_RTT_BUFFER_DOWN) + // R7 WrOff + // + PUSH {R4-R7} + ADD R3,R0,R0, LSL #+1 + LDR.W R0,=_SEGGER_RTT // pRing = &_SEGGER_RTT.aUp[BufferIndex]; + ADD R0,R0,R3, LSL #+3 + ADD R6,R0,#+24 + LDR R0,[R6, #+16] // RdOff = pRing->RdOff; + LDR R7,[R6, #+12] // WrOff = pRing->WrOff; + LDR R5,[R6, #+4] // pRing->pBuffer + CMP R7,R0 + BCC.N _CheckCase4 // if (RdOff <= WrOff) { => Case 1), 2) or 3) + // + // Handling for case 1, later on identical to case 4 + // + LDR R3,[R6, #+8] // Avail = pRing->SizeOfBuffer - WrOff - 1u; => Space until wrap-around (assume 1 byte not usable for case that RdOff == 0) + SUBS R4,R3,R7 // (Used in case we jump into case 2 afterwards) + SUBS R3,R4,#+1 // + CMP R3,R2 + BCC.N _CheckCase2 // if (Avail >= NumBytes) { => Case 1)? +_Case4: + ADDS R5,R7,R5 // pBuffer += WrOff + ADDS R0,R2,R7 // v = WrOff + NumBytes + // + // 2x unrolling for the copy loop that is used most of the time + // This is a special optimization for small SystemView packets and makes them even faster + // + _ALIGN(2) +_LoopCopyStraight: // memcpy(pRing->pBuffer + WrOff, pData, NumBytes); + LDRB R3,[R1], #+1 + STRB R3,[R5], #+1 // *pDest++ = *pSrc++ + SUBS R2,R2,#+1 + BEQ _CSDone + LDRB R3,[R1], #+1 + STRB R3,[R5], #+1 // *pDest++ = *pSrc++ + SUBS R2,R2,#+1 + BNE _LoopCopyStraight +_CSDone: +#if _CORE_NEEDS_DMB // Do not slow down cores that do not need a DMB instruction here + DMB // Cortex-M7 may delay memory writes and also change the order in which the writes happen. Therefore, make sure that all buffer writes are finished, before updating the in the struct +#endif + STR R0,[R6, #+12] // pRing->WrOff = WrOff + NumBytes; + MOVS R0,#+1 + POP {R4-R7} + BX LR // Return 1 +_CheckCase2: + ADDS R0,R0,R3 // Avail += RdOff; => Space incl. wrap-around + CMP R0,R2 + BCC.N _Case3 // if (Avail >= NumBytes) { => Case 2? => If not, we have case 3) (does not fit) + // + // Handling for case 2 + // + ADDS R0,R7,R5 // v = pRing->pBuffer + WrOff => Do not change pRing->pBuffer here because 2nd chunk needs org. value + SUBS R2,R2,R4 // NumBytes -= Rem; (Rem = pRing->SizeOfBuffer - WrOff; => Space until end of buffer) +_LoopCopyBeforeWrapAround: // memcpy(pRing->pBuffer + WrOff, pData, Rem); => Copy 1st chunk + LDRB R3,[R1], #+1 + STRB R3,[R0], #+1 // *pDest++ = *pSrc++ + SUBS R4,R4,#+1 + BNE _LoopCopyBeforeWrapAround + // + // Special case: First check that assumed RdOff == 0 calculated that last element before wrap-around could not be used + // But 2nd check (considering space until wrap-around and until RdOff) revealed that RdOff is not 0, so we can use the last element + // In this case, we may use a copy straight until buffer end anyway without needing to copy 2 chunks + // Therefore, check if 2nd memcpy is necessary at all + // + ADDS R4,R2,#+0 // Save (needed as counter in loop but must be written to after the loop). Also use this inst to update the flags to skip 2nd loop if possible + BEQ.N _No2ChunkNeeded // if (NumBytes) { +_LoopCopyAfterWrapAround: // memcpy(pRing->pBuffer, pData + Rem, NumBytes); + LDRB R3,[R1], #+1 // pData already points to the next src byte due to copy loop increment before this loop + STRB R3,[R5], #+1 // *pDest++ = *pSrc++ + SUBS R2,R2,#+1 + BNE _LoopCopyAfterWrapAround +_No2ChunkNeeded: +#if _CORE_NEEDS_DMB // Do not slow down cores that do not need a DMB instruction here + DMB // Cortex-M7 may delay memory writes and also change the order in which the writes happen. Therefore, make sure that all buffer writes are finished, before updating the in the struct +#endif + STR R4,[R6, #+12] // pRing->WrOff = NumBytes; => Must be written after copying data because J-Link may read control block asynchronously while writing into buffer + MOVS R0,#+1 + POP {R4-R7} + BX LR // Return 1 +_CheckCase4: + SUBS R0,R0,R7 + SUBS R0,R0,#+1 // Avail = RdOff - WrOff - 1u; + CMP R0,R2 + BCS.N _Case4 // if (Avail >= NumBytes) { => Case 4) == 1) ? => If not, we have case 5) == 3) (does not fit) +_Case3: + MOVS R0,#+0 + POP {R4-R7} + BX LR // Return 0 + _PLACE_LITS + +#endif // defined (RTT_USE_ASM) && (RTT_USE_ASM == 1) + _END + +/*************************** End of file ****************************/ diff --git a/core/embed/segger/SEGGER/SEGGER_RTT_printf.c b/core/embed/segger/SEGGER/SEGGER_RTT_printf.c index 30f9eb937e..2b9ff123d5 100644 --- a/core/embed/segger/SEGGER/SEGGER_RTT_printf.c +++ b/core/embed/segger/SEGGER/SEGGER_RTT_printf.c @@ -1,504 +1,504 @@ -/********************************************************************* -* SEGGER Microcontroller GmbH * -* The Embedded Experts * -********************************************************************** -* * -* (c) 1995 - 2019 SEGGER Microcontroller GmbH * -* * -* www.segger.com Support: support@segger.com * -* * -********************************************************************** -* * -* SEGGER SystemView * Real-time application analysis * -* * -********************************************************************** -* * -* All rights reserved. * -* * -* SEGGER strongly recommends to not make any changes * -* to or modify the source code of this software in order to stay * -* compatible with the SystemView and RTT protocol, and J-Link. * -* * -* Redistribution and use in source and binary forms, with or * -* without modification, are permitted provided that the following * -* condition is met: * -* * -* o Redistributions of source code must retain the above copyright * -* notice, this condition and the following disclaimer. * -* * -* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND * -* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * -* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * -* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * -* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR * -* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * -* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * -* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * -* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * -* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * -* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE * -* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH * -* DAMAGE. * -* * -********************************************************************** -* * -* SystemView version: 3.20 * -* * -********************************************************************** ----------------------------END-OF-HEADER------------------------------ -File : SEGGER_RTT_printf.c -Purpose : Replacement for printf to write formatted data via RTT -Revision: $Rev: 17697 $ ----------------------------------------------------------------------- -*/ -#include "SEGGER_RTT.h" -#include "SEGGER_RTT_Conf.h" - -/********************************************************************* -* -* Defines, configurable -* -********************************************************************** -*/ - -#ifndef SEGGER_RTT_PRINTF_BUFFER_SIZE - #define SEGGER_RTT_PRINTF_BUFFER_SIZE (64) -#endif - -#include -#include - - -#define FORMAT_FLAG_LEFT_JUSTIFY (1u << 0) -#define FORMAT_FLAG_PAD_ZERO (1u << 1) -#define FORMAT_FLAG_PRINT_SIGN (1u << 2) -#define FORMAT_FLAG_ALTERNATE (1u << 3) - -/********************************************************************* -* -* Types -* -********************************************************************** -*/ - -typedef struct { - char* pBuffer; - unsigned BufferSize; - unsigned Cnt; - - int ReturnValue; - - unsigned RTTBufferIndex; -} SEGGER_RTT_PRINTF_DESC; - -/********************************************************************* -* -* Function prototypes -* -********************************************************************** -*/ - -/********************************************************************* -* -* Static code -* -********************************************************************** -*/ -/********************************************************************* -* -* _StoreChar -*/ -static void _StoreChar(SEGGER_RTT_PRINTF_DESC * p, char c) { - unsigned Cnt; - - Cnt = p->Cnt; - if ((Cnt + 1u) <= p->BufferSize) { - *(p->pBuffer + Cnt) = c; - p->Cnt = Cnt + 1u; - p->ReturnValue++; - } - // - // Write part of string, when the buffer is full - // - if (p->Cnt == p->BufferSize) { - if (SEGGER_RTT_Write(p->RTTBufferIndex, p->pBuffer, p->Cnt) != p->Cnt) { - p->ReturnValue = -1; - } else { - p->Cnt = 0u; - } - } -} - -/********************************************************************* -* -* _PrintUnsigned -*/ -static void _PrintUnsigned(SEGGER_RTT_PRINTF_DESC * pBufferDesc, unsigned v, unsigned Base, unsigned NumDigits, unsigned FieldWidth, unsigned FormatFlags) { - static const char _aV2C[16] = {'0', '1', '2', '3', '4', '5', '6', '7', '8', '9', 'A', 'B', 'C', 'D', 'E', 'F' }; - unsigned Div; - unsigned Digit; - unsigned Number; - unsigned Width; - char c; - - Number = v; - Digit = 1u; - // - // Get actual field width - // - Width = 1u; - while (Number >= Base) { - Number = (Number / Base); - Width++; - } - if (NumDigits > Width) { - Width = NumDigits; - } - // - // Print leading chars if necessary - // - if ((FormatFlags & FORMAT_FLAG_LEFT_JUSTIFY) == 0u) { - if (FieldWidth != 0u) { - if (((FormatFlags & FORMAT_FLAG_PAD_ZERO) == FORMAT_FLAG_PAD_ZERO) && (NumDigits == 0u)) { - c = '0'; - } else { - c = ' '; - } - while ((FieldWidth != 0u) && (Width < FieldWidth)) { - FieldWidth--; - _StoreChar(pBufferDesc, c); - if (pBufferDesc->ReturnValue < 0) { - break; - } - } - } - } - if (pBufferDesc->ReturnValue >= 0) { - // - // Compute Digit. - // Loop until Digit has the value of the highest digit required. - // Example: If the output is 345 (Base 10), loop 2 times until Digit is 100. - // - while (1) { - if (NumDigits > 1u) { // User specified a min number of digits to print? => Make sure we loop at least that often, before checking anything else (> 1 check avoids problems with NumDigits being signed / unsigned) - NumDigits--; - } else { - Div = v / Digit; - if (Div < Base) { // Is our divider big enough to extract the highest digit from value? => Done - break; - } - } - Digit *= Base; - } - // - // Output digits - // - do { - Div = v / Digit; - v -= Div * Digit; - _StoreChar(pBufferDesc, _aV2C[Div]); - if (pBufferDesc->ReturnValue < 0) { - break; - } - Digit /= Base; - } while (Digit); - // - // Print trailing spaces if necessary - // - if ((FormatFlags & FORMAT_FLAG_LEFT_JUSTIFY) == FORMAT_FLAG_LEFT_JUSTIFY) { - if (FieldWidth != 0u) { - while ((FieldWidth != 0u) && (Width < FieldWidth)) { - FieldWidth--; - _StoreChar(pBufferDesc, ' '); - if (pBufferDesc->ReturnValue < 0) { - break; - } - } - } - } - } -} - -/********************************************************************* -* -* _PrintInt -*/ -static void _PrintInt(SEGGER_RTT_PRINTF_DESC * pBufferDesc, int v, unsigned Base, unsigned NumDigits, unsigned FieldWidth, unsigned FormatFlags) { - unsigned Width; - int Number; - - Number = (v < 0) ? -v : v; - - // - // Get actual field width - // - Width = 1u; - while (Number >= (int)Base) { - Number = (Number / (int)Base); - Width++; - } - if (NumDigits > Width) { - Width = NumDigits; - } - if ((FieldWidth > 0u) && ((v < 0) || ((FormatFlags & FORMAT_FLAG_PRINT_SIGN) == FORMAT_FLAG_PRINT_SIGN))) { - FieldWidth--; - } - - // - // Print leading spaces if necessary - // - if ((((FormatFlags & FORMAT_FLAG_PAD_ZERO) == 0u) || (NumDigits != 0u)) && ((FormatFlags & FORMAT_FLAG_LEFT_JUSTIFY) == 0u)) { - if (FieldWidth != 0u) { - while ((FieldWidth != 0u) && (Width < FieldWidth)) { - FieldWidth--; - _StoreChar(pBufferDesc, ' '); - if (pBufferDesc->ReturnValue < 0) { - break; - } - } - } - } - // - // Print sign if necessary - // - if (pBufferDesc->ReturnValue >= 0) { - if (v < 0) { - v = -v; - _StoreChar(pBufferDesc, '-'); - } else if ((FormatFlags & FORMAT_FLAG_PRINT_SIGN) == FORMAT_FLAG_PRINT_SIGN) { - _StoreChar(pBufferDesc, '+'); - } else { - - } - if (pBufferDesc->ReturnValue >= 0) { - // - // Print leading zeros if necessary - // - if (((FormatFlags & FORMAT_FLAG_PAD_ZERO) == FORMAT_FLAG_PAD_ZERO) && ((FormatFlags & FORMAT_FLAG_LEFT_JUSTIFY) == 0u) && (NumDigits == 0u)) { - if (FieldWidth != 0u) { - while ((FieldWidth != 0u) && (Width < FieldWidth)) { - FieldWidth--; - _StoreChar(pBufferDesc, '0'); - if (pBufferDesc->ReturnValue < 0) { - break; - } - } - } - } - if (pBufferDesc->ReturnValue >= 0) { - // - // Print number without sign - // - _PrintUnsigned(pBufferDesc, (unsigned)v, Base, NumDigits, FieldWidth, FormatFlags); - } - } - } -} - -/********************************************************************* -* -* Public code -* -********************************************************************** -*/ -/********************************************************************* -* -* SEGGER_RTT_vprintf -* -* Function description -* Stores a formatted string in SEGGER RTT control block. -* This data is read by the host. -* -* Parameters -* BufferIndex Index of "Up"-buffer to be used. (e.g. 0 for "Terminal") -* sFormat Pointer to format string -* pParamList Pointer to the list of arguments for the format string -* -* Return values -* >= 0: Number of bytes which have been stored in the "Up"-buffer. -* < 0: Error -*/ -int SEGGER_RTT_vprintf(unsigned BufferIndex, const char * sFormat, va_list * pParamList) { - char c; - SEGGER_RTT_PRINTF_DESC BufferDesc; - int v; - unsigned NumDigits; - unsigned FormatFlags; - unsigned FieldWidth; - char acBuffer[SEGGER_RTT_PRINTF_BUFFER_SIZE]; - - BufferDesc.pBuffer = acBuffer; - BufferDesc.BufferSize = SEGGER_RTT_PRINTF_BUFFER_SIZE; - BufferDesc.Cnt = 0u; - BufferDesc.RTTBufferIndex = BufferIndex; - BufferDesc.ReturnValue = 0; - - do { - c = *sFormat; - sFormat++; - if (c == 0u) { - break; - } - if (c == '%') { - // - // Filter out flags - // - FormatFlags = 0u; - v = 1; - do { - c = *sFormat; - switch (c) { - case '-': FormatFlags |= FORMAT_FLAG_LEFT_JUSTIFY; sFormat++; break; - case '0': FormatFlags |= FORMAT_FLAG_PAD_ZERO; sFormat++; break; - case '+': FormatFlags |= FORMAT_FLAG_PRINT_SIGN; sFormat++; break; - case '#': FormatFlags |= FORMAT_FLAG_ALTERNATE; sFormat++; break; - default: v = 0; break; - } - } while (v); - // - // filter out field with - // - FieldWidth = 0u; - do { - c = *sFormat; - if ((c < '0') || (c > '9')) { - break; - } - sFormat++; - FieldWidth = (FieldWidth * 10u) + ((unsigned)c - '0'); - } while (1); - - // - // Filter out precision (number of digits to display) - // - NumDigits = 0u; - c = *sFormat; - if (c == '.') { - sFormat++; - do { - c = *sFormat; - if ((c < '0') || (c > '9')) { - break; - } - sFormat++; - NumDigits = NumDigits * 10u + ((unsigned)c - '0'); - } while (1); - } - // - // Filter out length modifier - // - c = *sFormat; - do { - if ((c == 'l') || (c == 'h')) { - sFormat++; - c = *sFormat; - } else { - break; - } - } while (1); - // - // Handle specifiers - // - switch (c) { - case 'c': { - char c0; - v = va_arg(*pParamList, int); - c0 = (char)v; - _StoreChar(&BufferDesc, c0); - break; - } - case 'd': - v = va_arg(*pParamList, int); - _PrintInt(&BufferDesc, v, 10u, NumDigits, FieldWidth, FormatFlags); - break; - case 'u': - v = va_arg(*pParamList, int); - _PrintUnsigned(&BufferDesc, (unsigned)v, 10u, NumDigits, FieldWidth, FormatFlags); - break; - case 'x': - case 'X': - v = va_arg(*pParamList, int); - _PrintUnsigned(&BufferDesc, (unsigned)v, 16u, NumDigits, FieldWidth, FormatFlags); - break; - case 's': - { - const char * s = va_arg(*pParamList, const char *); - do { - c = *s; - s++; - if (c == '\0') { - break; - } - _StoreChar(&BufferDesc, c); - } while (BufferDesc.ReturnValue >= 0); - } - break; - case 'p': - v = va_arg(*pParamList, int); - _PrintUnsigned(&BufferDesc, (unsigned)v, 16u, 8u, 8u, 0u); - break; - case '%': - _StoreChar(&BufferDesc, '%'); - break; - default: - break; - } - sFormat++; - } else { - _StoreChar(&BufferDesc, c); - } - } while (BufferDesc.ReturnValue >= 0); - - if (BufferDesc.ReturnValue > 0) { - // - // Write remaining data, if any - // - if (BufferDesc.Cnt != 0u) { - SEGGER_RTT_Write(BufferIndex, acBuffer, BufferDesc.Cnt); - } - BufferDesc.ReturnValue += (int)BufferDesc.Cnt; - } - return BufferDesc.ReturnValue; -} - -/********************************************************************* -* -* SEGGER_RTT_printf -* -* Function description -* Stores a formatted string in SEGGER RTT control block. -* This data is read by the host. -* -* Parameters -* BufferIndex Index of "Up"-buffer to be used. (e.g. 0 for "Terminal") -* sFormat Pointer to format string, followed by the arguments for conversion -* -* Return values -* >= 0: Number of bytes which have been stored in the "Up"-buffer. -* < 0: Error -* -* Notes -* (1) Conversion specifications have following syntax: -* %[flags][FieldWidth][.Precision]ConversionSpecifier -* (2) Supported flags: -* -: Left justify within the field width -* +: Always print sign extension for signed conversions -* 0: Pad with 0 instead of spaces. Ignored when using '-'-flag or precision -* Supported conversion specifiers: -* c: Print the argument as one char -* d: Print the argument as a signed integer -* u: Print the argument as an unsigned integer -* x: Print the argument as an hexadecimal integer -* s: Print the string pointed to by the argument -* p: Print the argument as an 8-digit hexadecimal integer. (Argument shall be a pointer to void.) -*/ -int SEGGER_RTT_printf(unsigned BufferIndex, const char * sFormat, ...) { - int r; - va_list ParamList; - - va_start(ParamList, sFormat); - r = SEGGER_RTT_vprintf(BufferIndex, sFormat, &ParamList); - va_end(ParamList); - return r; -} -/*************************** End of file ****************************/ +/********************************************************************* +* SEGGER Microcontroller GmbH * +* The Embedded Experts * +********************************************************************** +* * +* (c) 1995 - 2019 SEGGER Microcontroller GmbH * +* * +* www.segger.com Support: support@segger.com * +* * +********************************************************************** +* * +* SEGGER SystemView * Real-time application analysis * +* * +********************************************************************** +* * +* All rights reserved. * +* * +* SEGGER strongly recommends to not make any changes * +* to or modify the source code of this software in order to stay * +* compatible with the SystemView and RTT protocol, and J-Link. * +* * +* Redistribution and use in source and binary forms, with or * +* without modification, are permitted provided that the following * +* condition is met: * +* * +* o Redistributions of source code must retain the above copyright * +* notice, this condition and the following disclaimer. * +* * +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND * +* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * +* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * +* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * +* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR * +* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * +* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * +* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * +* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * +* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE * +* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH * +* DAMAGE. * +* * +********************************************************************** +* * +* SystemView version: 3.20 * +* * +********************************************************************** +---------------------------END-OF-HEADER------------------------------ +File : SEGGER_RTT_printf.c +Purpose : Replacement for printf to write formatted data via RTT +Revision: $Rev: 17697 $ +---------------------------------------------------------------------- +*/ +#include "SEGGER_RTT.h" +#include "SEGGER_RTT_Conf.h" + +/********************************************************************* +* +* Defines, configurable +* +********************************************************************** +*/ + +#ifndef SEGGER_RTT_PRINTF_BUFFER_SIZE + #define SEGGER_RTT_PRINTF_BUFFER_SIZE (64) +#endif + +#include +#include + + +#define FORMAT_FLAG_LEFT_JUSTIFY (1u << 0) +#define FORMAT_FLAG_PAD_ZERO (1u << 1) +#define FORMAT_FLAG_PRINT_SIGN (1u << 2) +#define FORMAT_FLAG_ALTERNATE (1u << 3) + +/********************************************************************* +* +* Types +* +********************************************************************** +*/ + +typedef struct { + char* pBuffer; + unsigned BufferSize; + unsigned Cnt; + + int ReturnValue; + + unsigned RTTBufferIndex; +} SEGGER_RTT_PRINTF_DESC; + +/********************************************************************* +* +* Function prototypes +* +********************************************************************** +*/ + +/********************************************************************* +* +* Static code +* +********************************************************************** +*/ +/********************************************************************* +* +* _StoreChar +*/ +static void _StoreChar(SEGGER_RTT_PRINTF_DESC * p, char c) { + unsigned Cnt; + + Cnt = p->Cnt; + if ((Cnt + 1u) <= p->BufferSize) { + *(p->pBuffer + Cnt) = c; + p->Cnt = Cnt + 1u; + p->ReturnValue++; + } + // + // Write part of string, when the buffer is full + // + if (p->Cnt == p->BufferSize) { + if (SEGGER_RTT_Write(p->RTTBufferIndex, p->pBuffer, p->Cnt) != p->Cnt) { + p->ReturnValue = -1; + } else { + p->Cnt = 0u; + } + } +} + +/********************************************************************* +* +* _PrintUnsigned +*/ +static void _PrintUnsigned(SEGGER_RTT_PRINTF_DESC * pBufferDesc, unsigned v, unsigned Base, unsigned NumDigits, unsigned FieldWidth, unsigned FormatFlags) { + static const char _aV2C[16] = {'0', '1', '2', '3', '4', '5', '6', '7', '8', '9', 'A', 'B', 'C', 'D', 'E', 'F' }; + unsigned Div; + unsigned Digit; + unsigned Number; + unsigned Width; + char c; + + Number = v; + Digit = 1u; + // + // Get actual field width + // + Width = 1u; + while (Number >= Base) { + Number = (Number / Base); + Width++; + } + if (NumDigits > Width) { + Width = NumDigits; + } + // + // Print leading chars if necessary + // + if ((FormatFlags & FORMAT_FLAG_LEFT_JUSTIFY) == 0u) { + if (FieldWidth != 0u) { + if (((FormatFlags & FORMAT_FLAG_PAD_ZERO) == FORMAT_FLAG_PAD_ZERO) && (NumDigits == 0u)) { + c = '0'; + } else { + c = ' '; + } + while ((FieldWidth != 0u) && (Width < FieldWidth)) { + FieldWidth--; + _StoreChar(pBufferDesc, c); + if (pBufferDesc->ReturnValue < 0) { + break; + } + } + } + } + if (pBufferDesc->ReturnValue >= 0) { + // + // Compute Digit. + // Loop until Digit has the value of the highest digit required. + // Example: If the output is 345 (Base 10), loop 2 times until Digit is 100. + // + while (1) { + if (NumDigits > 1u) { // User specified a min number of digits to print? => Make sure we loop at least that often, before checking anything else (> 1 check avoids problems with NumDigits being signed / unsigned) + NumDigits--; + } else { + Div = v / Digit; + if (Div < Base) { // Is our divider big enough to extract the highest digit from value? => Done + break; + } + } + Digit *= Base; + } + // + // Output digits + // + do { + Div = v / Digit; + v -= Div * Digit; + _StoreChar(pBufferDesc, _aV2C[Div]); + if (pBufferDesc->ReturnValue < 0) { + break; + } + Digit /= Base; + } while (Digit); + // + // Print trailing spaces if necessary + // + if ((FormatFlags & FORMAT_FLAG_LEFT_JUSTIFY) == FORMAT_FLAG_LEFT_JUSTIFY) { + if (FieldWidth != 0u) { + while ((FieldWidth != 0u) && (Width < FieldWidth)) { + FieldWidth--; + _StoreChar(pBufferDesc, ' '); + if (pBufferDesc->ReturnValue < 0) { + break; + } + } + } + } + } +} + +/********************************************************************* +* +* _PrintInt +*/ +static void _PrintInt(SEGGER_RTT_PRINTF_DESC * pBufferDesc, int v, unsigned Base, unsigned NumDigits, unsigned FieldWidth, unsigned FormatFlags) { + unsigned Width; + int Number; + + Number = (v < 0) ? -v : v; + + // + // Get actual field width + // + Width = 1u; + while (Number >= (int)Base) { + Number = (Number / (int)Base); + Width++; + } + if (NumDigits > Width) { + Width = NumDigits; + } + if ((FieldWidth > 0u) && ((v < 0) || ((FormatFlags & FORMAT_FLAG_PRINT_SIGN) == FORMAT_FLAG_PRINT_SIGN))) { + FieldWidth--; + } + + // + // Print leading spaces if necessary + // + if ((((FormatFlags & FORMAT_FLAG_PAD_ZERO) == 0u) || (NumDigits != 0u)) && ((FormatFlags & FORMAT_FLAG_LEFT_JUSTIFY) == 0u)) { + if (FieldWidth != 0u) { + while ((FieldWidth != 0u) && (Width < FieldWidth)) { + FieldWidth--; + _StoreChar(pBufferDesc, ' '); + if (pBufferDesc->ReturnValue < 0) { + break; + } + } + } + } + // + // Print sign if necessary + // + if (pBufferDesc->ReturnValue >= 0) { + if (v < 0) { + v = -v; + _StoreChar(pBufferDesc, '-'); + } else if ((FormatFlags & FORMAT_FLAG_PRINT_SIGN) == FORMAT_FLAG_PRINT_SIGN) { + _StoreChar(pBufferDesc, '+'); + } else { + + } + if (pBufferDesc->ReturnValue >= 0) { + // + // Print leading zeros if necessary + // + if (((FormatFlags & FORMAT_FLAG_PAD_ZERO) == FORMAT_FLAG_PAD_ZERO) && ((FormatFlags & FORMAT_FLAG_LEFT_JUSTIFY) == 0u) && (NumDigits == 0u)) { + if (FieldWidth != 0u) { + while ((FieldWidth != 0u) && (Width < FieldWidth)) { + FieldWidth--; + _StoreChar(pBufferDesc, '0'); + if (pBufferDesc->ReturnValue < 0) { + break; + } + } + } + } + if (pBufferDesc->ReturnValue >= 0) { + // + // Print number without sign + // + _PrintUnsigned(pBufferDesc, (unsigned)v, Base, NumDigits, FieldWidth, FormatFlags); + } + } + } +} + +/********************************************************************* +* +* Public code +* +********************************************************************** +*/ +/********************************************************************* +* +* SEGGER_RTT_vprintf +* +* Function description +* Stores a formatted string in SEGGER RTT control block. +* This data is read by the host. +* +* Parameters +* BufferIndex Index of "Up"-buffer to be used. (e.g. 0 for "Terminal") +* sFormat Pointer to format string +* pParamList Pointer to the list of arguments for the format string +* +* Return values +* >= 0: Number of bytes which have been stored in the "Up"-buffer. +* < 0: Error +*/ +int SEGGER_RTT_vprintf(unsigned BufferIndex, const char * sFormat, va_list * pParamList) { + char c; + SEGGER_RTT_PRINTF_DESC BufferDesc; + int v; + unsigned NumDigits; + unsigned FormatFlags; + unsigned FieldWidth; + char acBuffer[SEGGER_RTT_PRINTF_BUFFER_SIZE]; + + BufferDesc.pBuffer = acBuffer; + BufferDesc.BufferSize = SEGGER_RTT_PRINTF_BUFFER_SIZE; + BufferDesc.Cnt = 0u; + BufferDesc.RTTBufferIndex = BufferIndex; + BufferDesc.ReturnValue = 0; + + do { + c = *sFormat; + sFormat++; + if (c == 0u) { + break; + } + if (c == '%') { + // + // Filter out flags + // + FormatFlags = 0u; + v = 1; + do { + c = *sFormat; + switch (c) { + case '-': FormatFlags |= FORMAT_FLAG_LEFT_JUSTIFY; sFormat++; break; + case '0': FormatFlags |= FORMAT_FLAG_PAD_ZERO; sFormat++; break; + case '+': FormatFlags |= FORMAT_FLAG_PRINT_SIGN; sFormat++; break; + case '#': FormatFlags |= FORMAT_FLAG_ALTERNATE; sFormat++; break; + default: v = 0; break; + } + } while (v); + // + // filter out field with + // + FieldWidth = 0u; + do { + c = *sFormat; + if ((c < '0') || (c > '9')) { + break; + } + sFormat++; + FieldWidth = (FieldWidth * 10u) + ((unsigned)c - '0'); + } while (1); + + // + // Filter out precision (number of digits to display) + // + NumDigits = 0u; + c = *sFormat; + if (c == '.') { + sFormat++; + do { + c = *sFormat; + if ((c < '0') || (c > '9')) { + break; + } + sFormat++; + NumDigits = NumDigits * 10u + ((unsigned)c - '0'); + } while (1); + } + // + // Filter out length modifier + // + c = *sFormat; + do { + if ((c == 'l') || (c == 'h')) { + sFormat++; + c = *sFormat; + } else { + break; + } + } while (1); + // + // Handle specifiers + // + switch (c) { + case 'c': { + char c0; + v = va_arg(*pParamList, int); + c0 = (char)v; + _StoreChar(&BufferDesc, c0); + break; + } + case 'd': + v = va_arg(*pParamList, int); + _PrintInt(&BufferDesc, v, 10u, NumDigits, FieldWidth, FormatFlags); + break; + case 'u': + v = va_arg(*pParamList, int); + _PrintUnsigned(&BufferDesc, (unsigned)v, 10u, NumDigits, FieldWidth, FormatFlags); + break; + case 'x': + case 'X': + v = va_arg(*pParamList, int); + _PrintUnsigned(&BufferDesc, (unsigned)v, 16u, NumDigits, FieldWidth, FormatFlags); + break; + case 's': + { + const char * s = va_arg(*pParamList, const char *); + do { + c = *s; + s++; + if (c == '\0') { + break; + } + _StoreChar(&BufferDesc, c); + } while (BufferDesc.ReturnValue >= 0); + } + break; + case 'p': + v = va_arg(*pParamList, int); + _PrintUnsigned(&BufferDesc, (unsigned)v, 16u, 8u, 8u, 0u); + break; + case '%': + _StoreChar(&BufferDesc, '%'); + break; + default: + break; + } + sFormat++; + } else { + _StoreChar(&BufferDesc, c); + } + } while (BufferDesc.ReturnValue >= 0); + + if (BufferDesc.ReturnValue > 0) { + // + // Write remaining data, if any + // + if (BufferDesc.Cnt != 0u) { + SEGGER_RTT_Write(BufferIndex, acBuffer, BufferDesc.Cnt); + } + BufferDesc.ReturnValue += (int)BufferDesc.Cnt; + } + return BufferDesc.ReturnValue; +} + +/********************************************************************* +* +* SEGGER_RTT_printf +* +* Function description +* Stores a formatted string in SEGGER RTT control block. +* This data is read by the host. +* +* Parameters +* BufferIndex Index of "Up"-buffer to be used. (e.g. 0 for "Terminal") +* sFormat Pointer to format string, followed by the arguments for conversion +* +* Return values +* >= 0: Number of bytes which have been stored in the "Up"-buffer. +* < 0: Error +* +* Notes +* (1) Conversion specifications have following syntax: +* %[flags][FieldWidth][.Precision]ConversionSpecifier +* (2) Supported flags: +* -: Left justify within the field width +* +: Always print sign extension for signed conversions +* 0: Pad with 0 instead of spaces. Ignored when using '-'-flag or precision +* Supported conversion specifiers: +* c: Print the argument as one char +* d: Print the argument as a signed integer +* u: Print the argument as an unsigned integer +* x: Print the argument as an hexadecimal integer +* s: Print the string pointed to by the argument +* p: Print the argument as an 8-digit hexadecimal integer. (Argument shall be a pointer to void.) +*/ +int SEGGER_RTT_printf(unsigned BufferIndex, const char * sFormat, ...) { + int r; + va_list ParamList; + + va_start(ParamList, sFormat); + r = SEGGER_RTT_vprintf(BufferIndex, sFormat, &ParamList); + va_end(ParamList); + return r; +} +/*************************** End of file ****************************/ diff --git a/core/embed/segger/SEGGER/SEGGER_SYSVIEW.c b/core/embed/segger/SEGGER/SEGGER_SYSVIEW.c index b278e9a031..575d835b3b 100644 --- a/core/embed/segger/SEGGER/SEGGER_SYSVIEW.c +++ b/core/embed/segger/SEGGER/SEGGER_SYSVIEW.c @@ -1,3061 +1,3061 @@ -/********************************************************************* -* SEGGER Microcontroller GmbH * -* The Embedded Experts * -********************************************************************** -* * -* (c) 1995 - 2019 SEGGER Microcontroller GmbH * -* * -* www.segger.com Support: support@segger.com * -* * -********************************************************************** -* * -* SEGGER SystemView * Real-time application analysis * -* * -********************************************************************** -* * -* All rights reserved. * -* * -* SEGGER strongly recommends to not make any changes * -* to or modify the source code of this software in order to stay * -* compatible with the SystemView and RTT protocol, and J-Link. * -* * -* Redistribution and use in source and binary forms, with or * -* without modification, are permitted provided that the following * -* condition is met: * -* * -* o Redistributions of source code must retain the above copyright * -* notice, this condition and the following disclaimer. * -* * -* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND * -* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * -* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * -* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * -* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR * -* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * -* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * -* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * -* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * -* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * -* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE * -* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH * -* DAMAGE. * -* * -********************************************************************** -* * -* SystemView version: 3.20 * -* * -********************************************************************** --------------------------- END-OF-HEADER ----------------------------- - -File : SEGGER_SYSVIEW.c -Purpose : System visualization API implementation. -Revision: $Rev: 21281 $ - -Additional information: - Packet format: - Packets with IDs 0..23 are standard packets with known structure. - For efficiency, they do *NOT* contain a length field. - - - Packets with IDs 24..31 are standard packets with extendible - structure and contain a length field. - - - Packet ID 31 is used for SystemView extended events. - - - Packets with IDs >= 32 always contain a length field. - - - Packet IDs: - 0.. 31 : Standard packets, known by SystemView. - 32..1023 : OS-definable packets, described in a SystemView description file. - 1024..2047 : User-definable packets, described in a SystemView description file. - 2048..32767: Undefined. - - Data encoding: - Basic types (int, short, char, ...): - Basic types are encoded little endian with most-significant bit variant - encoding. - Each encoded byte contains 7 data bits [6:0] and the MSB continuation bit. - The continuation bit indicates whether the next byte belongs to the data - (bit set) or this is the last byte (bit clear). - The most significant bits of data are encoded first, proceeding to the - least significant bits in the final byte (little endian). - - Example encoding: - Data: 0x1F4 (500) - Encoded: 0xF4 (First 7 data bits 74 | Continuation bit) - 0x03 (Second 7 data bits 03, no continuation) - - Data: 0xFFFFFFFF - Encoded: 0xFF 0xFF 0xFF 0xFF 0x0F - - Data: 0xA2 (162), 0x03 (3), 0x7000 - Encoded: 0xA2 0x01 0x03 0x80 0xE0 0x01 - - Byte arrays and strings: - Byte arrays and strings are encoded as followed by the raw data. - NumBytes is encoded as a basic type with a theoretical maximum of 4G. - - Example encoding: - Data: "Hello World\0" (0x48 0x65 0x6C 0x6C 0x6F 0x20 0x57 0x6F 0x72 0x6C 0x64 0x00) - Encoded: 0x0B 0x48 0x65 0x6C 0x6C 0x6F 0x20 0x57 0x6F 0x72 0x6C 0x64 - - Examples packets: - 01 F4 03 80 80 10 // Overflow packet. Data is a single U32. - This packet means: 500 packets lost, Timestamp is 0x40000 - - 02 0F 50 // ISR(15) Enter. Timestamp 80 (0x50) - - 03 20 // ISR Exit. Timestamp 32 (0x20) (Shortest possible packet.) - - Sample code for user defined Packets: - #define MY_ID 0x400 // Any value between 0x400 and 0x7FF - void SendMyPacket(unsigned Para0, unsigned Para1, const char* s) { - U8 aPacket[SEGGER_SYSVIEW_INFO_SIZE + 2 * SEGGER_SYSVIEW_QUANTA_U32 + MAX_STR_LEN + 1]; - U8* pPayload; - // - pPayload = SEGGER_SYSVIEW_PPREPARE_PACKET(aPacket); // Prepare the packet for SystemView - pPayload = SEGGER_SYSVIEW_EncodeU32(pPayload, Para0); // Add the first parameter to the packet - pPayload = SEGGER_SYSVIEW_EncodeU32(pPayload, Para1); // Add the second parameter to the packet - pPayload = SEGGER_SYSVIEW_EncodeString(pPayload, s, MAX_STR_LEN); // Add the string to the packet - // - SEGGER_SYSVIEW_SendPacket(&aPacket[0], pPayload, MY_ID); // Send the packet with EventId = MY_ID - } - - #define MY_ID_1 0x401 - void SendOnePara(unsigned Para0) { - SEGGER_SYSVIEW_RecordU32(MY_ID_1, Para0); - } - -*/ - -/********************************************************************* -* -* #include section -* -********************************************************************** -*/ - -#define SEGGER_SYSVIEW_C // For EXTERN statements in SEGGER_SYSVIEW.h - -#include -#include -#include -#include "SEGGER_SYSVIEW_Int.h" -#include "SEGGER_RTT.h" - -/********************************************************************* -* -* Defines, fixed -* -********************************************************************** -*/ -#if SEGGER_SYSVIEW_ID_SHIFT - #define SHRINK_ID(Id) (((Id) - _SYSVIEW_Globals.RAMBaseAddress) >> SEGGER_SYSVIEW_ID_SHIFT) -#else - #define SHRINK_ID(Id) ((Id) - _SYSVIEW_Globals.RAMBaseAddress) -#endif - -#if SEGGER_SYSVIEW_RTT_CHANNEL > 0 - #define CHANNEL_ID_UP SEGGER_SYSVIEW_RTT_CHANNEL - #define CHANNEL_ID_DOWN SEGGER_SYSVIEW_RTT_CHANNEL -#else - #define CHANNEL_ID_UP _SYSVIEW_Globals.UpChannel - #define CHANNEL_ID_DOWN _SYSVIEW_Globals.DownChannel -#endif - -#if SEGGER_SYSVIEW_CPU_CACHE_LINE_SIZE - #if (SEGGER_SYSVIEW_RTT_BUFFER_SIZE % SEGGER_SYSVIEW_CPU_CACHE_LINE_SIZE) - #error "SEGGER_SYSVIEW_RTT_BUFFER_SIZE must be a multiple of SEGGER_SYSVIEW_CPU_CACHE_LINE_SIZE" - #endif -#endif - -/********************************************************************* -* -* Defines, configurable -* -********************************************************************** -*/ -// Timestamps may be less than full 32-bits, in which case we need to zero -// the unused bits to properly handle overflows. -// Note that this is a quite common scenario, as a 32-bit time such as -// SysTick might be scaled down to reduce bandwith -// or a 16-bit hardware time might be used. -#if SEGGER_SYSVIEW_TIMESTAMP_BITS < 32 // Eliminate unused bits in case hardware timestamps are less than 32 bits - #define MAKE_DELTA_32BIT(Delta) Delta <<= 32 - SEGGER_SYSVIEW_TIMESTAMP_BITS; \ - Delta >>= 32 - SEGGER_SYSVIEW_TIMESTAMP_BITS; -#else - #define MAKE_DELTA_32BIT(Delta) -#endif - - -/********************************************************************* -* -* Defines, fixed -* -********************************************************************** -*/ -#define ENABLE_STATE_OFF 0 -#define ENABLE_STATE_ON 1 -#define ENABLE_STATE_DROPPING 2 - -#define FORMAT_FLAG_LEFT_JUSTIFY (1u << 0) -#define FORMAT_FLAG_PAD_ZERO (1u << 1) -#define FORMAT_FLAG_PRINT_SIGN (1u << 2) -#define FORMAT_FLAG_ALTERNATE (1u << 3) - -#define MODULE_EVENT_OFFSET (512) - -/********************************************************************* -* -* Types, local -* -********************************************************************** -*/ -typedef struct { - U8* pBuffer; - U8* pPayload; - U8* pPayloadStart; - U32 Options; - unsigned Cnt; -} SEGGER_SYSVIEW_PRINTF_DESC; - -typedef struct { - U8 EnableState; // 0: Disabled, 1: Enabled, (2: Dropping) - U8 UpChannel; - U8 RecursionCnt; - U32 SysFreq; - U32 CPUFreq; - U32 LastTxTimeStamp; - U32 RAMBaseAddress; -#if (SEGGER_SYSVIEW_POST_MORTEM_MODE == 1) - U32 PacketCount; -#else - U32 DropCount; - U8 DownChannel; -#endif - U32 DisabledEvents; - const SEGGER_SYSVIEW_OS_API* pOSAPI; - SEGGER_SYSVIEW_SEND_SYS_DESC_FUNC* pfSendSysDesc; -} SEGGER_SYSVIEW_GLOBALS; - -/********************************************************************* -* -* Function prototypes, required -* -********************************************************************** -*/ -static void _SendPacket(U8* pStartPacket, U8* pEndPacket, unsigned int EventId); - -/********************************************************************* -* -* Static data -* -********************************************************************** -*/ -static const U8 _abSync[10] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; - -#if SEGGER_SYSVIEW_CPU_CACHE_LINE_SIZE - #ifdef SEGGER_SYSVIEW_SECTION - // - // Alignment + special section required - // - #if (defined __GNUC__) - __attribute__ ((section (SEGGER_SYSVIEW_SECTION), aligned (SEGGER_SYSVIEW_CPU_CACHE_LINE_SIZE))) static char _UpBuffer [SEGGER_SYSVIEW_RTT_BUFFER_SIZE]; - #if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) - __attribute__ ((section (SEGGER_SYSVIEW_SECTION), aligned (SEGGER_SYSVIEW_CPU_CACHE_LINE_SIZE))) static char _DownBuffer[8]; // Small, fixed-size buffer, for back-channel comms - #endif - #elif (defined __ICCARM__) || (defined __ICCRX__) - #pragma location=SEGGER_SYSVIEW_SECTION - #pragma data_alignment=SEGGER_RTT_CPU_CACHE_LINE_SIZE - static char _UpBuffer [SEGGER_SYSVIEW_RTT_BUFFER_SIZE]; - #if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) - #pragma location=SEGGER_SYSVIEW_SECTION - #pragma data_alignment=SEGGER_RTT_CPU_CACHE_LINE_SIZE - static char _DownBuffer[8]; // Small, fixed-size buffer, for back-channel comms - #endif - #elif (defined __CC_ARM) - __attribute__ ((section (SEGGER_SYSVIEW_SECTION), aligned (SEGGER_SYSVIEW_CPU_CACHE_LINE_SIZE), zero_init)) static char _UpBuffer [SEGGER_SYSVIEW_RTT_BUFFER_SIZE]; - #if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) - __attribute__ ((section (SEGGER_SYSVIEW_SECTION), aligned (SEGGER_SYSVIEW_CPU_CACHE_LINE_SIZE), zero_init)) static char _DownBuffer[8]; // Small, fixed-size buffer, for back-channel comms - #endif - #else - #error "Do not know how to place SystemView buffers in specific section" - #endif - #else - // - // Only alignment required - // - #if (defined __GNUC__) - __attribute__ ((aligned (SEGGER_SYSVIEW_CPU_CACHE_LINE_SIZE))) static char _UpBuffer [SEGGER_SYSVIEW_RTT_BUFFER_SIZE]; - #if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) - __attribute__ ((aligned (SEGGER_SYSVIEW_CPU_CACHE_LINE_SIZE))) static char _DownBuffer[8]; // Small, fixed-size buffer, for back-channel comms - #endif - #elif (defined __ICCARM__) || (defined __ICCRX__) - #pragma data_alignment=SEGGER_RTT_CPU_CACHE_LINE_SIZE - static char _UpBuffer [SEGGER_SYSVIEW_RTT_BUFFER_SIZE]; - #if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) - #pragma data_alignment=SEGGER_RTT_CPU_CACHE_LINE_SIZE - static char _DownBuffer[8]; // Small, fixed-size buffer, for back-channel comms - #endif - #elif (defined __CC_ARM) - __attribute__ ((aligned (SEGGER_SYSVIEW_CPU_CACHE_LINE_SIZE), zero_init)) static char _UpBuffer [SEGGER_SYSVIEW_RTT_BUFFER_SIZE]; - #if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) - __attribute__ ((aligned (SEGGER_SYSVIEW_CPU_CACHE_LINE_SIZE), zero_init)) static char _DownBuffer[8]; // Small, fixed-size buffer, for back-channel comms - #endif - #else - #error "Do not know how to align SystemView buffers to cache line size" - #endif - #endif -#else - #ifdef SEGGER_SYSVIEW_SECTION - // - // Only special section required - // - #if (defined __GNUC__) - __attribute__ ((section (SEGGER_SYSVIEW_SECTION))) static char _UpBuffer [SEGGER_SYSVIEW_RTT_BUFFER_SIZE]; - #if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) - __attribute__ ((section (SEGGER_SYSVIEW_SECTION))) static char _DownBuffer[8]; // Small, fixed-size buffer, for back-channel comms - #endif - #elif (defined __ICCARM__) || (defined __ICCRX__) - #pragma location=SEGGER_SYSVIEW_SECTION - static char _UpBuffer [SEGGER_SYSVIEW_RTT_BUFFER_SIZE]; - #if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) - #pragma location=SEGGER_SYSVIEW_SECTION - static char _DownBuffer[8]; // Small, fixed-size buffer, for back-channel comms - #endif - #elif (defined __CC_ARM) - __attribute__ ((section (SEGGER_SYSVIEW_SECTION), zero_init)) static char _UpBuffer [SEGGER_SYSVIEW_RTT_BUFFER_SIZE]; - #if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) - __attribute__ ((section (SEGGER_SYSVIEW_SECTION), zero_init)) static char _DownBuffer[8]; // Small, fixed-size buffer, for back-channel comms - #endif - #else - #error "Do not know how to place SystemView buffers in specific section" - #endif - #else - // - // Neither special section nor alignment required - // - static char _UpBuffer [SEGGER_SYSVIEW_RTT_BUFFER_SIZE]; - #if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) - static char _DownBuffer[8]; // Small, fixed-size buffer, for back-channel comms - #endif - #endif -#endif - -#ifdef SEGGER_SYSVIEW_SECTION - #if (defined __GNUC__) - __attribute__ ((section (SEGGER_SYSVIEW_SECTION))) static char _UpBuffer [SEGGER_SYSVIEW_RTT_BUFFER_SIZE]; - #if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) - __attribute__ ((section (SEGGER_SYSVIEW_SECTION))) static char _DownBuffer[8]; // Small, fixed-size buffer, for back-channel comms - #endif - #elif (defined __ICCARM__) || (defined __ICCRX__) - #pragma location=SEGGER_SYSVIEW_SECTION - static char _UpBuffer [SEGGER_SYSVIEW_RTT_BUFFER_SIZE]; - #pragma location=SEGGER_SYSVIEW_SECTION - static char _DownBuffer[8]; // Small, fixed-size buffer, for back-channel comms - #elif (defined __CC_ARM) - __attribute__ ((section (SEGGER_SYSVIEW_SECTION), zero_init)) static char _UpBuffer [SEGGER_SYSVIEW_RTT_BUFFER_SIZE]; - #if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) - __attribute__ ((section (SEGGER_SYSVIEW_SECTION), zero_init)) static char _DownBuffer[8]; // Small, fixed-size buffer, for back-channel comms - #endif - #else - static char _UpBuffer [SEGGER_SYSVIEW_RTT_BUFFER_SIZE]; - #if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) - static char _DownBuffer[8]; // Small, fixed-size buffer, for back-channel comms - #endif - #endif -#else - #if SEGGER_SYSVIEW_CPU_CACHE_LINE_SIZE - #if (defined __GNUC__) - static char _UpBuffer [SEGGER_SYSVIEW_RTT_BUFFER_SIZE] __attribute__ ((aligned (SEGGER_SYSVIEW_CPU_CACHE_LINE_SIZE))); - #if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) - static char _DownBuffer[8] __attribute__ ((aligned (SEGGER_SYSVIEW_CPU_CACHE_LINE_SIZE))); // Small, fixed-size buffer, for back-channel comms - #endif - #elif (defined(__ICCARM__)) - #pragma data_alignment=SEGGER_RTT_CPU_CACHE_LINE_SIZE - static char _UpBuffer [SEGGER_SYSVIEW_RTT_BUFFER_SIZE]; - #if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) - #pragma data_alignment=SEGGER_RTT_CPU_CACHE_LINE_SIZE - static char _DownBuffer[8]; // Small, fixed-size buffer, for back-channel comms - #endif - #else - #error "Don't know how to place _SEGGER_RTT, _acUpBuffer, _acDownBuffer cache-line aligned" - #endif - #else - static char _UpBuffer [SEGGER_SYSVIEW_RTT_BUFFER_SIZE]; - #if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) - static char _DownBuffer[8]; // Small, fixed-size buffer, for back-channel comms - #endif - #endif -#endif - -static SEGGER_SYSVIEW_GLOBALS _SYSVIEW_Globals; - -static SEGGER_SYSVIEW_MODULE* _pFirstModule; -static U8 _NumModules; - -/********************************************************************* -* -* Static code -* -********************************************************************** -*/ - -#define ENCODE_U32(pDest, Value) { \ - U8* pSysviewPointer; \ - U32 SysViewData; \ - pSysviewPointer = pDest; \ - SysViewData = Value; \ - while(SysViewData > 0x7F) { \ - *pSysviewPointer++ = (U8)(SysViewData | 0x80); \ - SysViewData >>= 7; \ - }; \ - *pSysviewPointer++ = (U8)SysViewData; \ - pDest = pSysviewPointer; \ - }; - - - -#if (SEGGER_SYSVIEW_USE_STATIC_BUFFER == 1) -static U8 _aPacket[SEGGER_SYSVIEW_MAX_PACKET_SIZE]; - -#define RECORD_START(PacketSize) SEGGER_SYSVIEW_LOCK(); \ - pPayloadStart = _PreparePacket(_aPacket); - -#define RECORD_END() SEGGER_SYSVIEW_UNLOCK() - -#else - -#define RECORD_START(PacketSize) U8 aPacket[(PacketSize)]; \ - pPayloadStart = _PreparePacket(aPacket); \ - -#define RECORD_END() - -#endif - -/********************************************************************* -* -* _EncodeData() -* -* Function description -* Encode a byte buffer in variable-length format. -* -* Parameters -* pPayload - Pointer to where string will be encoded. -* pSrc - Pointer to data buffer to be encoded. -* NumBytes - Number of bytes in the buffer to be encoded. -* -* Return value -* Pointer to the byte following the value, i.e. the first free -* byte in the payload and the next position to store payload -* content. -* -* Additional information -* The data is encoded as a count byte followed by the contents -* of the data buffer. -* Make sure NumBytes + 1 bytes are free for the payload. -*/ -static U8* _EncodeData(U8* pPayload, const char* pSrc, unsigned int NumBytes) { - unsigned int n; - // - n = 0; - *pPayload++ = NumBytes; - while (n < NumBytes) { - *pPayload++ = *pSrc++; - n++; - } - return pPayload; -} - -/********************************************************************* -* -* _EncodeStr() -* -* Function description -* Encode a string in variable-length format. -* -* Parameters -* pPayload - Pointer to where string will be encoded. -* pText - String to encode. -* Limit - Maximum number of characters to encode from string. -* -* Return value -* Pointer to the byte following the value, i.e. the first free -* byte in the payload and the next position to store payload -* content. -* -* Additional information -* The string is encoded as a count byte followed by the contents -* of the string. -* No more than 1 + Limit bytes will be encoded to the payload. -*/ -static U8 *_EncodeStr(U8 *pPayload, const char *pText, unsigned int Limit) { - unsigned int n; - unsigned int Len; - // - // Compute string len - // - Len = 0; - while(*(pText + Len) != 0) { - Len++; - } - if (Len > Limit) { - Len = Limit; - } - // - // Write Len - // - if (Len < 255) { - *pPayload++ = Len; - } else { - *pPayload++ = 255; - *pPayload++ = (Len & 255); - *pPayload++ = ((Len >> 8) & 255); - } - // - // copy string - // - n = 0; - while (n < Len) { - *pPayload++ = *pText++; - n++; - } - return pPayload; -} - -/********************************************************************* -* -* _PreparePacket() -* -* Function description -* Prepare a SystemView event packet header. -* -* Parameters -* pPacket - Pointer to start of packet to initialize. -* -* Return value -* Pointer to first byte of packet payload. -* -* Additional information -* The payload length and evnetId are not initialized. -* PreparePacket only reserves space for them and they are -* computed and filled in by the sending function. -*/ -static U8* _PreparePacket(U8* pPacket) { - return pPacket + 4; -} - -/********************************************************************* -* -* _HandleIncomingPacket() -* -* Function description -* Read an incoming command from the down channel and process it. -* -* Additional information -* This function is called each time after sending a packet. -* Processing incoming packets is done asynchronous. SystemView might -* already have sent event packets after the host has sent a command. -*/ -#if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) -static void _HandleIncomingPacket(void) { - U8 Cmd; - int Status; - // - Status = SEGGER_RTT_ReadNoLock(CHANNEL_ID_DOWN, &Cmd, 1); - if (Status > 0) { - switch (Cmd) { - case SEGGER_SYSVIEW_COMMAND_ID_START: - SEGGER_SYSVIEW_Start(); - break; - case SEGGER_SYSVIEW_COMMAND_ID_STOP: - SEGGER_SYSVIEW_Stop(); - break; - case SEGGER_SYSVIEW_COMMAND_ID_GET_SYSTIME: - SEGGER_SYSVIEW_RecordSystime(); - break; - case SEGGER_SYSVIEW_COMMAND_ID_GET_TASKLIST: - SEGGER_SYSVIEW_SendTaskList(); - break; - case SEGGER_SYSVIEW_COMMAND_ID_GET_SYSDESC: - SEGGER_SYSVIEW_GetSysDesc(); - break; - case SEGGER_SYSVIEW_COMMAND_ID_GET_NUMMODULES: - SEGGER_SYSVIEW_SendNumModules(); - break; - case SEGGER_SYSVIEW_COMMAND_ID_GET_MODULEDESC: - SEGGER_SYSVIEW_SendModuleDescription(); - break; - case SEGGER_SYSVIEW_COMMAND_ID_GET_MODULE: - Status = SEGGER_RTT_ReadNoLock(CHANNEL_ID_DOWN, &Cmd, 1); - if (Status > 0) { - SEGGER_SYSVIEW_SendModule(Cmd); - } - break; - case SEGGER_SYSVIEW_COMMAND_ID_HEARTBEAT: - break; - default: - if (Cmd >= 128) { // Unknown extended command. Dummy read its parameter. - SEGGER_RTT_ReadNoLock(CHANNEL_ID_DOWN, &Cmd, 1); - } - break; - } - } -} -#endif // (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) - -/********************************************************************* -* -* _TrySendOverflowPacket() -* -* Function description -* Try to transmit an SystemView Overflow packet containing the -* number of dropped packets. -* -* Additional information -* Format as follows: -* 01 Max. packet len is 1 + 5 + 5 = 11 -* -* Example packets sent -* 01 20 40 -* -* Return value -* !=0: Success, Message sent (stored in RTT-Buffer) -* ==0: Buffer full, Message *NOT* stored -* -*/ -#if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) -static int _TrySendOverflowPacket(void) { - U32 TimeStamp; - I32 Delta; - int Status; - U8 aPacket[11]; - U8* pPayload; - - aPacket[0] = SYSVIEW_EVTID_OVERFLOW; // 1 - pPayload = &aPacket[1]; - ENCODE_U32(pPayload, _SYSVIEW_Globals.DropCount); - // - // Compute time stamp delta and append it to packet. - // - TimeStamp = SEGGER_SYSVIEW_GET_TIMESTAMP(); - Delta = TimeStamp - _SYSVIEW_Globals.LastTxTimeStamp; - MAKE_DELTA_32BIT(Delta); - ENCODE_U32(pPayload, Delta); - // - // Try to store packet in RTT buffer and update time stamp when this was successful - // - Status = SEGGER_RTT_WriteSkipNoLock(CHANNEL_ID_UP, aPacket, pPayload - aPacket); - SEGGER_SYSVIEW_ON_EVENT_RECORDED(pPayload - aPacket); - if (Status) { - _SYSVIEW_Globals.LastTxTimeStamp = TimeStamp; - _SYSVIEW_Globals.EnableState--; // EnableState has been 2, will be 1. Always. - } else { - _SYSVIEW_Globals.DropCount++; - } - // - return Status; -} -#endif // (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) - -/********************************************************************* -* -* _SendSyncInfo() -* -* Function description -* Send SystemView sync packet and system information in -* post mortem mode. -* -* Additional information -* Sync is 10 * 0x00 without timestamp -*/ -#if (SEGGER_SYSVIEW_POST_MORTEM_MODE == 1) -static void _SendSyncInfo(void) { - // - // Add sync packet ( 10 * 0x00) - // Send system description - // Send system time - // Send task list - // Send module description - // Send module information - // - SEGGER_RTT_WriteWithOverwriteNoLock(CHANNEL_ID_UP, _abSync, 10); - SEGGER_SYSVIEW_ON_EVENT_RECORDED(10); - SEGGER_SYSVIEW_RecordVoid(SYSVIEW_EVTID_TRACE_START); - { - U8* pPayload; - U8* pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 4 * SEGGER_SYSVIEW_QUANTA_U32); - // - pPayload = pPayloadStart; - ENCODE_U32(pPayload, _SYSVIEW_Globals.SysFreq); - ENCODE_U32(pPayload, _SYSVIEW_Globals.CPUFreq); - ENCODE_U32(pPayload, _SYSVIEW_Globals.RAMBaseAddress); - ENCODE_U32(pPayload, SEGGER_SYSVIEW_ID_SHIFT); - _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_INIT); - RECORD_END(); - } - if (_SYSVIEW_Globals.pfSendSysDesc) { - _SYSVIEW_Globals.pfSendSysDesc(); - } - SEGGER_SYSVIEW_RecordSystime(); - SEGGER_SYSVIEW_SendTaskList(); - if (_NumModules > 0) { - int n; - SEGGER_SYSVIEW_SendNumModules(); - for (n = 0; n < _NumModules; n++) { - SEGGER_SYSVIEW_SendModule(n); - } - SEGGER_SYSVIEW_SendModuleDescription(); - } -} -#endif // (SEGGER_SYSVIEW_POST_MORTEM_MODE == 1) - -/********************************************************************* -* -* _SendPacket() -* -* Function description -* Send a SystemView packet over RTT. RTT channel and mode are -* configured by macros when the SystemView component is initialized. -* This function takes care of maintaining the packet drop count -* and sending overflow packets when necessary. -* The packet must be passed without Id and Length because this -* function prepends it to the packet before transmission. -* -* Parameters -* pStartPacket - Pointer to start of packet payload. -* There must be at least 4 bytes free to prepend Id and Length. -* pEndPacket - Pointer to end of packet payload. -* EventId - Id of the event to send. -* -*/ -static void _SendPacket(U8* pStartPacket, U8* pEndPacket, unsigned int EventId) { - unsigned int NumBytes; - U32 TimeStamp; - U32 Delta; -#if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) - int Status; -#endif - -#if (SEGGER_SYSVIEW_USE_STATIC_BUFFER == 0) - SEGGER_SYSVIEW_LOCK(); -#endif - -#if (SEGGER_SYSVIEW_POST_MORTEM_MODE == 1) - if (_SYSVIEW_Globals.EnableState == 0) { - goto SendDone; - } -#else - if (_SYSVIEW_Globals.EnableState == 1) { // Enabled, no dropped packets remaining - goto Send; - } - if (_SYSVIEW_Globals.EnableState == 0) { - goto SendDone; - } - // - // Handle buffer full situations: - // Have packets been dropped before because buffer was full? - // In this case try to send and overflow packet. - // - if (_SYSVIEW_Globals.EnableState == 2) { - _TrySendOverflowPacket(); - if (_SYSVIEW_Globals.EnableState != 1) { - goto SendDone; - } - } -Send: -#endif - // - // Check if event is disabled from being recorded. - // - if (EventId < 32) { - if (_SYSVIEW_Globals.DisabledEvents & ((U32)1u << EventId)) { - goto SendDone; - } - } - // - // Prepare actual packet. - // If it is a known packet, prepend eventId only, - // otherwise prepend packet length and eventId. - // - if (EventId < 24) { - *--pStartPacket = EventId; - } else { - NumBytes = pEndPacket - pStartPacket; - if (NumBytes > 127) { - *--pStartPacket = (NumBytes >> 7); - *--pStartPacket = NumBytes | 0x80; - } else { - *--pStartPacket = NumBytes; - } - if (EventId > 127) { - *--pStartPacket = (EventId >> 7); - *--pStartPacket = EventId | 0x80; - } else { - *--pStartPacket = EventId; - } - } - // - // Compute time stamp delta and append it to packet. - // - TimeStamp = SEGGER_SYSVIEW_GET_TIMESTAMP(); - Delta = TimeStamp - _SYSVIEW_Globals.LastTxTimeStamp; - MAKE_DELTA_32BIT(Delta); - ENCODE_U32(pEndPacket, Delta); -#if (SEGGER_SYSVIEW_POST_MORTEM_MODE == 1) - // - // Store packet in RTT buffer by overwriting old data and update time stamp - // - SEGGER_RTT_WriteWithOverwriteNoLock(CHANNEL_ID_UP, pStartPacket, pEndPacket - pStartPacket); - SEGGER_SYSVIEW_ON_EVENT_RECORDED(pEndPacket - pStartPacket); - _SYSVIEW_Globals.LastTxTimeStamp = TimeStamp; -#else - // - // Try to store packet in RTT buffer and update time stamp when this was successful - // - Status = SEGGER_RTT_WriteSkipNoLock(CHANNEL_ID_UP, pStartPacket, pEndPacket - pStartPacket); - SEGGER_SYSVIEW_ON_EVENT_RECORDED(pEndPacket - pStartPacket); - if (Status) { - _SYSVIEW_Globals.LastTxTimeStamp = TimeStamp; - } else { - _SYSVIEW_Globals.EnableState++; // EnableState has been 1, will be 2. Always. - } -#endif - -#if (SEGGER_SYSVIEW_POST_MORTEM_MODE == 1) - // - // Add sync and system information periodically if we are in post mortem mode - // - if (_SYSVIEW_Globals.RecursionCnt == 0) { // Avoid uncontrolled nesting. This way, this routine can call itself once, but no more often than that. - _SYSVIEW_Globals.RecursionCnt = 1; - if (_SYSVIEW_Globals.PacketCount++ & (1 << SEGGER_SYSVIEW_SYNC_PERIOD_SHIFT)) { - _SendSyncInfo(); - _SYSVIEW_Globals.PacketCount = 0; - } - _SYSVIEW_Globals.RecursionCnt = 0; - } -SendDone: - ; // Avoid "label at end of compound statement" error when using static buffer -#else -SendDone: - // - // Check if host is sending data which needs to be processed. - // Note that since this code is called for every packet, it is very time critical, so we do - // only what is really needed here, which is checking if there is any data - // - if (SEGGER_RTT_HASDATA(CHANNEL_ID_DOWN)) { - if (_SYSVIEW_Globals.RecursionCnt == 0) { // Avoid uncontrolled nesting. This way, this routine can call itself once, but no more often than that. - _SYSVIEW_Globals.RecursionCnt = 1; - _HandleIncomingPacket(); - _SYSVIEW_Globals.RecursionCnt = 0; - } - } -#endif - // -#if (SEGGER_SYSVIEW_USE_STATIC_BUFFER == 0) - SEGGER_SYSVIEW_UNLOCK(); // We are done. Unlock and return -#endif -} - -#ifndef SEGGER_SYSVIEW_EXCLUDE_PRINTF // Define in project to avoid warnings about variable parameter list -/********************************************************************* -* -* _VPrintHost() -* -* Function description -* Send a format string and its parameters to the host. -* -* Parameters -* s Pointer to format string. -* Options Options to be sent to the host. -* pParamList Pointer to the list of arguments for the format string. -*/ -static int _VPrintHost(const char* s, U32 Options, va_list* pParamList) { - U32 aParas[SEGGER_SYSVIEW_MAX_ARGUMENTS]; - U32* pParas; - U32 NumArguments; - const char* p; - char c; - U8* pPayload; - U8* pPayloadStart; -#if SEGGER_SYSVIEW_PRINTF_IMPLICIT_FORMAT - U8 HasNonScalar; - - HasNonScalar = 0; -#endif - // - // Count number of arguments by counting '%' characters in string. - // If enabled, check for non-scalar modifier flags to format string on the target. - // - p = s; - NumArguments = 0; - for (;;) { - c = *p++; - if (c == 0) { - break; - } - if (c == '%') { - c = *p; -#if SEGGER_SYSVIEW_PRINTF_IMPLICIT_FORMAT == 0 - aParas[NumArguments++] = va_arg(*pParamList, int); - if (NumArguments == SEGGER_SYSVIEW_MAX_ARGUMENTS) { - break; - } -#else - if (c == 's') { - HasNonScalar = 1; - break; - } else { - aParas[NumArguments++] = va_arg(*pParamList, int); - if (NumArguments == SEGGER_SYSVIEW_MAX_ARGUMENTS) { - break; - } - } -#endif - } - } - -#if SEGGER_SYSVIEW_PRINTF_IMPLICIT_FORMAT - if (HasNonScalar) { - return -1; - } -#endif - // - // Send string and parameters to host - // - { - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_MAX_STRING_LEN + 2 * SEGGER_SYSVIEW_QUANTA_U32 + SEGGER_SYSVIEW_MAX_ARGUMENTS * SEGGER_SYSVIEW_QUANTA_U32); - pPayload = _EncodeStr(pPayloadStart, s, SEGGER_SYSVIEW_MAX_STRING_LEN); - ENCODE_U32(pPayload, Options); - ENCODE_U32(pPayload, NumArguments); - pParas = aParas; - while (NumArguments--) { - ENCODE_U32(pPayload, (*pParas)); - pParas++; - } - _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_PRINT_FORMATTED); - RECORD_END(); - } - return 0; -} - -/********************************************************************* -* -* _StoreChar() -* -* Function description -* Stores a character in the printf-buffer and sends the buffer when -* it is filled. -* -* Parameters -* p Pointer to the buffer description. -* c Character to be printed. -*/ -static void _StoreChar(SEGGER_SYSVIEW_PRINTF_DESC * p, char c) { - unsigned int Cnt; - U8* pPayload; - U32 Options; - - Cnt = p->Cnt; - if ((Cnt + 1u) <= SEGGER_SYSVIEW_MAX_STRING_LEN) { - *(p->pPayload++) = c; - p->Cnt = Cnt + 1u; - } - // - // Write part of string, when the buffer is full - // - if (p->Cnt == SEGGER_SYSVIEW_MAX_STRING_LEN) { - *(p->pPayloadStart) = p->Cnt; - pPayload = p->pPayload; - Options = p->Options; - ENCODE_U32(pPayload, Options); - ENCODE_U32(pPayload, 0); - _SendPacket(p->pPayloadStart, pPayload, SYSVIEW_EVTID_PRINT_FORMATTED); - p->pPayloadStart = _PreparePacket(p->pBuffer); - p->pPayload = p->pPayloadStart + 1u; - p->Cnt = 0u; - } -} - -/********************************************************************* -* -* _PrintUnsigned() -* -* Function description -* Print an unsigned integer with the given formatting into the -* formatted string. -* -* Parameters -* pBufferDesc Pointer to the buffer description. -* v Value to be printed. -* Base Base of the value. -* NumDigits Number of digits to be printed. -* FieldWidth Width of the printed field. -* FormatFlags Flags for formatting the value. -*/ -static void _PrintUnsigned(SEGGER_SYSVIEW_PRINTF_DESC * pBufferDesc, unsigned int v, unsigned int Base, unsigned int NumDigits, unsigned int FieldWidth, unsigned int FormatFlags) { - static const char _aV2C[16] = {'0', '1', '2', '3', '4', '5', '6', '7', '8', '9', 'A', 'B', 'C', 'D', 'E', 'F' }; - unsigned int Div; - unsigned int Digit; - unsigned int Number; - unsigned int Width; - char c; - - Number = v; - Digit = 1u; - // - // Get actual field width - // - Width = 1u; - while (Number >= Base) { - Number = (Number / Base); - Width++; - } - if (NumDigits > Width) { - Width = NumDigits; - } - // - // Print leading chars if necessary - // - if ((FormatFlags & FORMAT_FLAG_LEFT_JUSTIFY) == 0u) { - if (FieldWidth != 0u) { - if (((FormatFlags & FORMAT_FLAG_PAD_ZERO) == FORMAT_FLAG_PAD_ZERO) && (NumDigits == 0u)) { - c = '0'; - } else { - c = ' '; - } - while ((FieldWidth != 0u) && (Width < FieldWidth)) { - FieldWidth--; - _StoreChar(pBufferDesc, c); - } - } - } - // - // Compute Digit. - // Loop until Digit has the value of the highest digit required. - // Example: If the output is 345 (Base 10), loop 2 times until Digit is 100. - // - while (1) { - if (NumDigits > 1u) { // User specified a min number of digits to print? => Make sure we loop at least that often, before checking anything else (> 1 check avoids problems with NumDigits being signed / unsigned) - NumDigits--; - } else { - Div = v / Digit; - if (Div < Base) { // Is our divider big enough to extract the highest digit from value? => Done - break; - } - } - Digit *= Base; - } - // - // Output digits - // - do { - Div = v / Digit; - v -= Div * Digit; - _StoreChar(pBufferDesc, _aV2C[Div]); - Digit /= Base; - } while (Digit); - // - // Print trailing spaces if necessary - // - if ((FormatFlags & FORMAT_FLAG_LEFT_JUSTIFY) == FORMAT_FLAG_LEFT_JUSTIFY) { - if (FieldWidth != 0u) { - while ((FieldWidth != 0u) && (Width < FieldWidth)) { - FieldWidth--; - _StoreChar(pBufferDesc, ' '); - } - } - } -} - -/********************************************************************* -* -* _PrintInt() -* -* Function description -* Print a signed integer with the given formatting into the -* formatted string. -* -* Parameters -* pBufferDesc Pointer to the buffer description. -* v Value to be printed. -* Base Base of the value. -* NumDigits Number of digits to be printed. -* FieldWidth Width of the printed field. -* FormatFlags Flags for formatting the value. -*/ -static void _PrintInt(SEGGER_SYSVIEW_PRINTF_DESC * pBufferDesc, int v, unsigned int Base, unsigned int NumDigits, unsigned int FieldWidth, unsigned int FormatFlags) { - unsigned int Width; - int Number; - - Number = (v < 0) ? -v : v; - - // - // Get actual field width - // - Width = 1u; - while (Number >= (int)Base) { - Number = (Number / (int)Base); - Width++; - } - if (NumDigits > Width) { - Width = NumDigits; - } - if ((FieldWidth > 0u) && ((v < 0) || ((FormatFlags & FORMAT_FLAG_PRINT_SIGN) == FORMAT_FLAG_PRINT_SIGN))) { - FieldWidth--; - } - - // - // Print leading spaces if necessary - // - if ((((FormatFlags & FORMAT_FLAG_PAD_ZERO) == 0u) || (NumDigits != 0u)) && ((FormatFlags & FORMAT_FLAG_LEFT_JUSTIFY) == 0u)) { - if (FieldWidth != 0u) { - while ((FieldWidth != 0u) && (Width < FieldWidth)) { - FieldWidth--; - _StoreChar(pBufferDesc, ' '); - } - } - } - // - // Print sign if necessary - // - if (v < 0) { - v = -v; - _StoreChar(pBufferDesc, '-'); - } else if ((FormatFlags & FORMAT_FLAG_PRINT_SIGN) == FORMAT_FLAG_PRINT_SIGN) { - _StoreChar(pBufferDesc, '+'); - } else { - - } - // - // Print leading zeros if necessary - // - if (((FormatFlags & FORMAT_FLAG_PAD_ZERO) == FORMAT_FLAG_PAD_ZERO) && ((FormatFlags & FORMAT_FLAG_LEFT_JUSTIFY) == 0u) && (NumDigits == 0u)) { - if (FieldWidth != 0u) { - while ((FieldWidth != 0u) && (Width < FieldWidth)) { - FieldWidth--; - _StoreChar(pBufferDesc, '0'); - } - } - } - // - // Print number without sign - // - _PrintUnsigned(pBufferDesc, (unsigned int)v, Base, NumDigits, FieldWidth, FormatFlags); -} - -/********************************************************************* -* -* _VPrintTarget() -* -* Function description -* Stores a formatted string. -* This data is read by the host. -* -* Parameters -* sFormat Pointer to format string. -* Options Options to be sent to the host. -* pParamList Pointer to the list of arguments for the format string. -*/ -static void _VPrintTarget(const char* sFormat, U32 Options, va_list* pParamList) { - SEGGER_SYSVIEW_PRINTF_DESC BufferDesc; - char c; - int v; - unsigned int NumDigits; - unsigned int FormatFlags; - unsigned int FieldWidth; - U8* pPayloadStart; -#if SEGGER_SYSVIEW_USE_STATIC_BUFFER == 0 - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_MAX_STRING_LEN + 1 + 2 * SEGGER_SYSVIEW_QUANTA_U32); - SEGGER_SYSVIEW_LOCK(); -#else - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_MAX_STRING_LEN + 1 + 2 * SEGGER_SYSVIEW_QUANTA_U32); -#endif - -#if SEGGER_SYSVIEW_USE_STATIC_BUFFER == 0 - BufferDesc.pBuffer = aPacket; -#else - BufferDesc.pBuffer = _aPacket; -#endif - BufferDesc.Cnt = 0u; - BufferDesc.pPayloadStart = pPayloadStart; - BufferDesc.pPayload = BufferDesc.pPayloadStart + 1u; - BufferDesc.Options = Options; - - do { - c = *sFormat; - sFormat++; - if (c == 0u) { - break; - } - if (c == '%') { - // - // Filter out flags - // - FormatFlags = 0u; - v = 1; - do { - c = *sFormat; - switch (c) { - case '-': FormatFlags |= FORMAT_FLAG_LEFT_JUSTIFY; sFormat++; break; - case '0': FormatFlags |= FORMAT_FLAG_PAD_ZERO; sFormat++; break; - case '+': FormatFlags |= FORMAT_FLAG_PRINT_SIGN; sFormat++; break; - case '#': FormatFlags |= FORMAT_FLAG_ALTERNATE; sFormat++; break; - default: v = 0; break; - } - } while (v); - // - // filter out field with - // - FieldWidth = 0u; - do { - c = *sFormat; - if ((c < '0') || (c > '9')) { - break; - } - sFormat++; - FieldWidth = (FieldWidth * 10u) + ((unsigned int)c - '0'); - } while (1); - - // - // Filter out precision (number of digits to display) - // - NumDigits = 0u; - c = *sFormat; - if (c == '.') { - sFormat++; - do { - c = *sFormat; - if ((c < '0') || (c > '9')) { - break; - } - sFormat++; - NumDigits = NumDigits * 10u + ((unsigned int)c - '0'); - } while (1); - } - // - // Filter out length modifier - // - c = *sFormat; - do { - if ((c == 'l') || (c == 'h')) { - c = *sFormat; - sFormat++; - } else { - break; - } - } while (1); - // - // Handle specifiers - // - switch (c) { - case 'c': { - char c0; - v = va_arg(*pParamList, int); - c0 = (char)v; - _StoreChar(&BufferDesc, c0); - break; - } - case 'd': - v = va_arg(*pParamList, int); - _PrintInt(&BufferDesc, v, 10u, NumDigits, FieldWidth, FormatFlags); - break; - case 'u': - v = va_arg(*pParamList, int); - _PrintUnsigned(&BufferDesc, (unsigned int)v, 10u, NumDigits, FieldWidth, FormatFlags); - break; - case 'x': - case 'X': - v = va_arg(*pParamList, int); - _PrintUnsigned(&BufferDesc, (unsigned int)v, 16u, NumDigits, FieldWidth, FormatFlags); - break; - case 'p': - v = va_arg(*pParamList, int); - _PrintUnsigned(&BufferDesc, (unsigned int)v, 16u, 8u, 8u, 0u); - break; - case '%': - _StoreChar(&BufferDesc, '%'); - break; - default: - break; - } - sFormat++; - } else { - _StoreChar(&BufferDesc, c); - } - } while (*sFormat); - - // - // Write remaining data, if any - // - if (BufferDesc.Cnt != 0u) { - *(BufferDesc.pPayloadStart) = BufferDesc.Cnt; - ENCODE_U32(BufferDesc.pPayload, BufferDesc.Options); - ENCODE_U32(BufferDesc.pPayload, 0); - _SendPacket(BufferDesc.pPayloadStart, BufferDesc.pPayload, SYSVIEW_EVTID_PRINT_FORMATTED); - } -#if SEGGER_SYSVIEW_USE_STATIC_BUFFER == 0 - SEGGER_SYSVIEW_UNLOCK(); - RECORD_END(); -#else - RECORD_END(); -#endif -} -#endif // SEGGER_SYSVIEW_EXCLUDE_PRINTF - -/********************************************************************* -* -* Public code -* -********************************************************************** -*/ - -/********************************************************************* -* -* SEGGER_SYSVIEW_Init() -* -* Function description -* Initializes the SYSVIEW module. -* Must be called before the Systemview Application connects to -* the system. -* -* Parameters -* SysFreq - Frequency of timestamp, usually CPU core clock frequency. -* CPUFreq - CPU core clock frequency. -* pOSAPI - Pointer to the API structure for OS-specific functions. -* pfSendSysDesc - Pointer to record system description callback function. -* -* Additional information -* This function initializes the RTT channel used to transport -* SEGGER SystemView packets. -* The channel is assigned the label "SysView" for client software -* to identify the SystemView channel. -* -* The channel is configured with the macro SEGGER_SYSVIEW_RTT_CHANNEL. -*/ -void SEGGER_SYSVIEW_Init(U32 SysFreq, U32 CPUFreq, const SEGGER_SYSVIEW_OS_API *pOSAPI, SEGGER_SYSVIEW_SEND_SYS_DESC_FUNC pfSendSysDesc) { -#ifdef SEGGER_RTT_SECTION - // - // Explicitly initialize the RTT Control Block if it is in its dedicated section. - // - SEGGER_RTT_Init(); -#endif -#if (SEGGER_SYSVIEW_POST_MORTEM_MODE == 1) -#if SEGGER_SYSVIEW_RTT_CHANNEL > 0 - SEGGER_RTT_ConfigUpBuffer(SEGGER_SYSVIEW_RTT_CHANNEL, "SysView", &_UpBuffer[0], sizeof(_UpBuffer), SEGGER_RTT_MODE_NO_BLOCK_SKIP); -#else - _SYSVIEW_Globals.UpChannel = SEGGER_RTT_AllocUpBuffer ("SysView", &_UpBuffer[0], sizeof(_UpBuffer), SEGGER_RTT_MODE_NO_BLOCK_SKIP); -#endif - _SYSVIEW_Globals.RAMBaseAddress = SEGGER_SYSVIEW_ID_BASE; - _SYSVIEW_Globals.LastTxTimeStamp = SEGGER_SYSVIEW_GET_TIMESTAMP(); - _SYSVIEW_Globals.pOSAPI = pOSAPI; - _SYSVIEW_Globals.SysFreq = SysFreq; - _SYSVIEW_Globals.CPUFreq = CPUFreq; - _SYSVIEW_Globals.pfSendSysDesc = pfSendSysDesc; - _SYSVIEW_Globals.EnableState = 0; - _SYSVIEW_Globals.PacketCount = 0; -#else // (SEGGER_SYSVIEW_POST_MORTEM_MODE == 1) -#if SEGGER_SYSVIEW_RTT_CHANNEL > 0 - SEGGER_RTT_ConfigUpBuffer (SEGGER_SYSVIEW_RTT_CHANNEL, "SysView", &_UpBuffer[0], sizeof(_UpBuffer), SEGGER_RTT_MODE_NO_BLOCK_SKIP); - SEGGER_RTT_ConfigDownBuffer (SEGGER_SYSVIEW_RTT_CHANNEL, "SysView", &_DownBuffer[0], sizeof(_DownBuffer), SEGGER_RTT_MODE_NO_BLOCK_SKIP); -#else - _SYSVIEW_Globals.UpChannel = SEGGER_RTT_AllocUpBuffer ("SysView", &_UpBuffer[0], sizeof(_UpBuffer), SEGGER_RTT_MODE_NO_BLOCK_SKIP); - _SYSVIEW_Globals.DownChannel = _SYSVIEW_Globals.UpChannel; - SEGGER_RTT_ConfigDownBuffer (_SYSVIEW_Globals.DownChannel, "SysView", &_DownBuffer[0], sizeof(_DownBuffer), SEGGER_RTT_MODE_NO_BLOCK_SKIP); -#endif - _SYSVIEW_Globals.RAMBaseAddress = SEGGER_SYSVIEW_ID_BASE; - _SYSVIEW_Globals.LastTxTimeStamp = SEGGER_SYSVIEW_GET_TIMESTAMP(); - _SYSVIEW_Globals.pOSAPI = pOSAPI; - _SYSVIEW_Globals.SysFreq = SysFreq; - _SYSVIEW_Globals.CPUFreq = CPUFreq; - _SYSVIEW_Globals.pfSendSysDesc = pfSendSysDesc; - _SYSVIEW_Globals.EnableState = 0; -#endif // (SEGGER_SYSVIEW_POST_MORTEM_MODE == 1) -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_SetRAMBase() -* -* Function description -* Sets the RAM base address, which is subtracted from IDs in order -* to save bandwidth. -* -* Parameters -* RAMBaseAddress - Lowest RAM Address. (i.e. 0x20000000 on most Cortex-M) -*/ -void SEGGER_SYSVIEW_SetRAMBase(U32 RAMBaseAddress) { - _SYSVIEW_Globals.RAMBaseAddress = RAMBaseAddress; -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_RecordVoid() -* -* Function description -* Formats and sends a SystemView packet with an empty payload. -* -* Parameters -* EventID - SystemView event ID. -*/ -void SEGGER_SYSVIEW_RecordVoid(unsigned int EventID) { - U8* pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE); - // - _SendPacket(pPayloadStart, pPayloadStart, EventID); - RECORD_END(); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_RecordU32() -* -* Function description -* Formats and sends a SystemView packet containing a single U32 -* parameter payload. -* -* Parameters -* EventID - SystemView event ID. -* Value - The 32-bit parameter encoded to SystemView packet payload. -*/ -void SEGGER_SYSVIEW_RecordU32(unsigned int EventID, U32 Value) { - U8* pPayload; - U8* pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_QUANTA_U32); - // - pPayload = pPayloadStart; - ENCODE_U32(pPayload, Value); - _SendPacket(pPayloadStart, pPayload, EventID); - RECORD_END(); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_RecordU32x2() -* -* Function description -* Formats and sends a SystemView packet containing 2 U32 parameter payload. -* -* Parameters -* EventID - SystemView event ID. -* Para0 - The 32-bit parameter encoded to SystemView packet payload. -* Para1 - The 32-bit parameter encoded to SystemView packet payload. -*/ -void SEGGER_SYSVIEW_RecordU32x2(unsigned int EventID, U32 Para0, U32 Para1) { - U8* pPayload; - U8* pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 2 * SEGGER_SYSVIEW_QUANTA_U32); - // - pPayload = pPayloadStart; - ENCODE_U32(pPayload, Para0); - ENCODE_U32(pPayload, Para1); - _SendPacket(pPayloadStart, pPayload, EventID); - RECORD_END(); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_RecordU32x3() -* -* Function description -* Formats and sends a SystemView packet containing 3 U32 parameter payload. -* -* Parameters -* EventID - SystemView event ID. -* Para0 - The 32-bit parameter encoded to SystemView packet payload. -* Para1 - The 32-bit parameter encoded to SystemView packet payload. -* Para2 - The 32-bit parameter encoded to SystemView packet payload. -*/ -void SEGGER_SYSVIEW_RecordU32x3(unsigned int EventID, U32 Para0, U32 Para1, U32 Para2) { - U8* pPayload; - U8* pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 3 * SEGGER_SYSVIEW_QUANTA_U32); - // - pPayload = pPayloadStart; - ENCODE_U32(pPayload, Para0); - ENCODE_U32(pPayload, Para1); - ENCODE_U32(pPayload, Para2); - _SendPacket(pPayloadStart, pPayload, EventID); - RECORD_END(); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_RecordU32x4() -* -* Function description -* Formats and sends a SystemView packet containing 4 U32 parameter payload. -* -* Parameters -* EventID - SystemView event ID. -* Para0 - The 32-bit parameter encoded to SystemView packet payload. -* Para1 - The 32-bit parameter encoded to SystemView packet payload. -* Para2 - The 32-bit parameter encoded to SystemView packet payload. -* Para3 - The 32-bit parameter encoded to SystemView packet payload. -*/ -void SEGGER_SYSVIEW_RecordU32x4(unsigned int EventID, U32 Para0, U32 Para1, U32 Para2, U32 Para3) { - U8* pPayload; - U8* pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 4 * SEGGER_SYSVIEW_QUANTA_U32); - // - pPayload = pPayloadStart; - ENCODE_U32(pPayload, Para0); - ENCODE_U32(pPayload, Para1); - ENCODE_U32(pPayload, Para2); - ENCODE_U32(pPayload, Para3); - _SendPacket(pPayloadStart, pPayload, EventID); - RECORD_END(); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_RecordU32x5() -* -* Function description -* Formats and sends a SystemView packet containing 5 U32 parameter payload. -* -* Parameters -* EventID - SystemView event ID. -* Para0 - The 32-bit parameter encoded to SystemView packet payload. -* Para1 - The 32-bit parameter encoded to SystemView packet payload. -* Para2 - The 32-bit parameter encoded to SystemView packet payload. -* Para3 - The 32-bit parameter encoded to SystemView packet payload. -* Para4 - The 32-bit parameter encoded to SystemView packet payload. -*/ -void SEGGER_SYSVIEW_RecordU32x5(unsigned int EventID, U32 Para0, U32 Para1, U32 Para2, U32 Para3, U32 Para4) { - U8* pPayload; - U8* pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 5 * SEGGER_SYSVIEW_QUANTA_U32); - // - pPayload = pPayloadStart; - ENCODE_U32(pPayload, Para0); - ENCODE_U32(pPayload, Para1); - ENCODE_U32(pPayload, Para2); - ENCODE_U32(pPayload, Para3); - ENCODE_U32(pPayload, Para4); - _SendPacket(pPayloadStart, pPayload, EventID); - RECORD_END(); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_RecordU32x6() -* -* Function description -* Formats and sends a SystemView packet containing 6 U32 parameter payload. -* -* Parameters -* EventID - SystemView event ID. -* Para0 - The 32-bit parameter encoded to SystemView packet payload. -* Para1 - The 32-bit parameter encoded to SystemView packet payload. -* Para2 - The 32-bit parameter encoded to SystemView packet payload. -* Para3 - The 32-bit parameter encoded to SystemView packet payload. -* Para4 - The 32-bit parameter encoded to SystemView packet payload. -* Para5 - The 32-bit parameter encoded to SystemView packet payload. -*/ -void SEGGER_SYSVIEW_RecordU32x6(unsigned int EventID, U32 Para0, U32 Para1, U32 Para2, U32 Para3, U32 Para4, U32 Para5) { - U8* pPayload; - U8* pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 6 * SEGGER_SYSVIEW_QUANTA_U32); - // - pPayload = pPayloadStart; - ENCODE_U32(pPayload, Para0); - ENCODE_U32(pPayload, Para1); - ENCODE_U32(pPayload, Para2); - ENCODE_U32(pPayload, Para3); - ENCODE_U32(pPayload, Para4); - ENCODE_U32(pPayload, Para5); - _SendPacket(pPayloadStart, pPayload, EventID); - RECORD_END(); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_RecordU32x7() -* -* Function description -* Formats and sends a SystemView packet containing 7 U32 parameter payload. -* -* Parameters -* EventID - SystemView event ID. -* Para0 - The 32-bit parameter encoded to SystemView packet payload. -* Para1 - The 32-bit parameter encoded to SystemView packet payload. -* Para2 - The 32-bit parameter encoded to SystemView packet payload. -* Para3 - The 32-bit parameter encoded to SystemView packet payload. -* Para4 - The 32-bit parameter encoded to SystemView packet payload. -* Para5 - The 32-bit parameter encoded to SystemView packet payload. -* Para6 - The 32-bit parameter encoded to SystemView packet payload. -*/ -void SEGGER_SYSVIEW_RecordU32x7(unsigned int EventID, U32 Para0, U32 Para1, U32 Para2, U32 Para3, U32 Para4, U32 Para5, U32 Para6) { - U8* pPayload; - U8* pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 7 * SEGGER_SYSVIEW_QUANTA_U32); - // - pPayload = pPayloadStart; - ENCODE_U32(pPayload, Para0); - ENCODE_U32(pPayload, Para1); - ENCODE_U32(pPayload, Para2); - ENCODE_U32(pPayload, Para3); - ENCODE_U32(pPayload, Para4); - ENCODE_U32(pPayload, Para5); - ENCODE_U32(pPayload, Para6); - _SendPacket(pPayloadStart, pPayload, EventID); - RECORD_END(); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_RecordU32x8() -* -* Function description -* Formats and sends a SystemView packet containing 8 U32 parameter payload. -* -* Parameters -* EventID - SystemView event ID. -* Para0 - The 32-bit parameter encoded to SystemView packet payload. -* Para1 - The 32-bit parameter encoded to SystemView packet payload. -* Para2 - The 32-bit parameter encoded to SystemView packet payload. -* Para3 - The 32-bit parameter encoded to SystemView packet payload. -* Para4 - The 32-bit parameter encoded to SystemView packet payload. -* Para5 - The 32-bit parameter encoded to SystemView packet payload. -* Para6 - The 32-bit parameter encoded to SystemView packet payload. -* Para7 - The 32-bit parameter encoded to SystemView packet payload. -*/ -void SEGGER_SYSVIEW_RecordU32x8(unsigned int EventID, U32 Para0, U32 Para1, U32 Para2, U32 Para3, U32 Para4, U32 Para5, U32 Para6, U32 Para7) { - U8* pPayload; - U8* pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 8 * SEGGER_SYSVIEW_QUANTA_U32); - // - pPayload = pPayloadStart; - ENCODE_U32(pPayload, Para0); - ENCODE_U32(pPayload, Para1); - ENCODE_U32(pPayload, Para2); - ENCODE_U32(pPayload, Para3); - ENCODE_U32(pPayload, Para4); - ENCODE_U32(pPayload, Para5); - ENCODE_U32(pPayload, Para6); - ENCODE_U32(pPayload, Para7); - _SendPacket(pPayloadStart, pPayload, EventID); - RECORD_END(); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_RecordU32x9() -* -* Function description -* Formats and sends a SystemView packet containing 9 U32 parameter payload. -* -* Parameters -* EventID - SystemView event ID. -* Para0 - The 32-bit parameter encoded to SystemView packet payload. -* Para1 - The 32-bit parameter encoded to SystemView packet payload. -* Para2 - The 32-bit parameter encoded to SystemView packet payload. -* Para3 - The 32-bit parameter encoded to SystemView packet payload. -* Para4 - The 32-bit parameter encoded to SystemView packet payload. -* Para5 - The 32-bit parameter encoded to SystemView packet payload. -* Para6 - The 32-bit parameter encoded to SystemView packet payload. -* Para7 - The 32-bit parameter encoded to SystemView packet payload. -* Para8 - The 32-bit parameter encoded to SystemView packet payload. -*/ -void SEGGER_SYSVIEW_RecordU32x9(unsigned int EventID, U32 Para0, U32 Para1, U32 Para2, U32 Para3, U32 Para4, U32 Para5, U32 Para6, U32 Para7, U32 Para8) { - U8* pPayload; - U8* pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 9 * SEGGER_SYSVIEW_QUANTA_U32); - // - pPayload = pPayloadStart; - ENCODE_U32(pPayload, Para0); - ENCODE_U32(pPayload, Para1); - ENCODE_U32(pPayload, Para2); - ENCODE_U32(pPayload, Para3); - ENCODE_U32(pPayload, Para4); - ENCODE_U32(pPayload, Para5); - ENCODE_U32(pPayload, Para6); - ENCODE_U32(pPayload, Para7); - ENCODE_U32(pPayload, Para8); - _SendPacket(pPayloadStart, pPayload, EventID); - RECORD_END(); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_RecordU32x10() -* -* Function description -* Formats and sends a SystemView packet containing 10 U32 parameter payload. -* -* Parameters -* EventID - SystemView event ID. -* Para0 - The 32-bit parameter encoded to SystemView packet payload. -* Para1 - The 32-bit parameter encoded to SystemView packet payload. -* Para2 - The 32-bit parameter encoded to SystemView packet payload. -* Para3 - The 32-bit parameter encoded to SystemView packet payload. -* Para4 - The 32-bit parameter encoded to SystemView packet payload. -* Para5 - The 32-bit parameter encoded to SystemView packet payload. -* Para6 - The 32-bit parameter encoded to SystemView packet payload. -* Para7 - The 32-bit parameter encoded to SystemView packet payload. -* Para8 - The 32-bit parameter encoded to SystemView packet payload. -* Para9 - The 32-bit parameter encoded to SystemView packet payload. -*/ -void SEGGER_SYSVIEW_RecordU32x10(unsigned int EventID, U32 Para0, U32 Para1, U32 Para2, U32 Para3, U32 Para4, U32 Para5, U32 Para6, U32 Para7, U32 Para8, U32 Para9) { - U8* pPayload; - U8* pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 10 * SEGGER_SYSVIEW_QUANTA_U32); - // - pPayload = pPayloadStart; - ENCODE_U32(pPayload, Para0); - ENCODE_U32(pPayload, Para1); - ENCODE_U32(pPayload, Para2); - ENCODE_U32(pPayload, Para3); - ENCODE_U32(pPayload, Para4); - ENCODE_U32(pPayload, Para5); - ENCODE_U32(pPayload, Para6); - ENCODE_U32(pPayload, Para7); - ENCODE_U32(pPayload, Para8); - ENCODE_U32(pPayload, Para9); - _SendPacket(pPayloadStart, pPayload, EventID); - RECORD_END(); -} -/********************************************************************* -* -* SEGGER_SYSVIEW_RecordString() -* -* Function description -* Formats and sends a SystemView packet containing a string. -* -* Parameters -* EventID - SystemView event ID. -* pString - The string to be sent in the SystemView packet payload. -* -* Additional information -* The string is encoded as a count byte followed by the contents -* of the string. -* No more than SEGGER_SYSVIEW_MAX_STRING_LEN bytes will be encoded to the payload. -*/ -void SEGGER_SYSVIEW_RecordString(unsigned int EventID, const char* pString) { - U8* pPayload; - U8* pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 1 + SEGGER_SYSVIEW_MAX_STRING_LEN); - // - pPayload = _EncodeStr(pPayloadStart, pString, SEGGER_SYSVIEW_MAX_STRING_LEN); - _SendPacket(pPayloadStart, pPayload, EventID); - RECORD_END(); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_Start() -* -* Function description -* Start recording SystemView events. -* -* This function is triggered by the SystemView Application on connect. -* For single-shot or post-mortem mode recording, it needs to be called -* by the application. -* -* Additional information -* This function enables transmission of SystemView packets recorded -* by subsequent trace calls and records a SystemView Start event. -* -* As part of start, a SystemView Init packet is sent, containing the system -* frequency. The list of current tasks, the current system time and the -* system description string is sent, too. -* -* Notes -* SEGGER_SYSVIEW_Start and SEGGER_SYSVIEW_Stop do not nest. -* When SEGGER_SYSVIEW_CAN_RESTART is 1, each received start command -* records the system information. This is required to enable restart -* of recordings when SystemView unexpectedly disconnects without sending -* a stop command before. -*/ -void SEGGER_SYSVIEW_Start(void) { -#if (SEGGER_SYSVIEW_CAN_RESTART == 0) - if (_SYSVIEW_Globals.EnableState == 0) { -#endif - _SYSVIEW_Globals.EnableState = 1; -#if (SEGGER_SYSVIEW_POST_MORTEM_MODE == 1) - _SendSyncInfo(); -#else - SEGGER_SYSVIEW_LOCK(); - SEGGER_RTT_WriteSkipNoLock(CHANNEL_ID_UP, _abSync, 10); - SEGGER_SYSVIEW_UNLOCK(); - SEGGER_SYSVIEW_ON_EVENT_RECORDED(10); - SEGGER_SYSVIEW_RecordVoid(SYSVIEW_EVTID_TRACE_START); - { - U8* pPayload; - U8* pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 4 * SEGGER_SYSVIEW_QUANTA_U32); - // - pPayload = pPayloadStart; - ENCODE_U32(pPayload, _SYSVIEW_Globals.SysFreq); - ENCODE_U32(pPayload, _SYSVIEW_Globals.CPUFreq); - ENCODE_U32(pPayload, _SYSVIEW_Globals.RAMBaseAddress); - ENCODE_U32(pPayload, SEGGER_SYSVIEW_ID_SHIFT); - _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_INIT); - RECORD_END(); - } - if (_SYSVIEW_Globals.pfSendSysDesc) { - _SYSVIEW_Globals.pfSendSysDesc(); - } - SEGGER_SYSVIEW_RecordSystime(); - SEGGER_SYSVIEW_SendTaskList(); - SEGGER_SYSVIEW_SendNumModules(); -#endif -#if (SEGGER_SYSVIEW_CAN_RESTART == 0) - } -#endif -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_Stop() -* -* Function description -* Stop recording SystemView events. -* -* This function is triggered by the SystemView Application on disconnect. -* For single-shot or post-mortem mode recording, it can be called -* by the application. -* -* Additional information -* This function disables transmission of SystemView packets recorded -* by subsequent trace calls. If transmission is enabled when -* this function is called, a single SystemView Stop event is recorded -* to the trace, send, and then trace transmission is halted. -*/ -void SEGGER_SYSVIEW_Stop(void) { - U8* pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE); - // - if (_SYSVIEW_Globals.EnableState) { - _SendPacket(pPayloadStart, pPayloadStart, SYSVIEW_EVTID_TRACE_STOP); - _SYSVIEW_Globals.EnableState = 0; - } - RECORD_END(); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_GetChannelID() -* -* Function description -* Returns the RTT / channel ID used by SystemView. -*/ -int SEGGER_SYSVIEW_GetChannelID(void) { - return CHANNEL_ID_UP; -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_GetSysDesc() -* -* Function description -* Triggers a send of the system information and description. -* -*/ -void SEGGER_SYSVIEW_GetSysDesc(void) { - U8* pPayload; - U8* pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 4 * SEGGER_SYSVIEW_QUANTA_U32); - // - pPayload = pPayloadStart; - ENCODE_U32(pPayload, _SYSVIEW_Globals.SysFreq); - ENCODE_U32(pPayload, _SYSVIEW_Globals.CPUFreq); - ENCODE_U32(pPayload, _SYSVIEW_Globals.RAMBaseAddress); - ENCODE_U32(pPayload, SEGGER_SYSVIEW_ID_SHIFT); - _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_INIT); - RECORD_END(); - if (_SYSVIEW_Globals.pfSendSysDesc) { - _SYSVIEW_Globals.pfSendSysDesc(); - } -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_SendTaskInfo() -* -* Function description -* Send a Task Info Packet, containing TaskId for identification, -* task priority and task name. -* -* Parameters -* pInfo - Pointer to task information to send. -*/ -void SEGGER_SYSVIEW_SendTaskInfo(const SEGGER_SYSVIEW_TASKINFO *pInfo) { - U8* pPayload; - U8* pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_QUANTA_U32 + 1 + 32); - // - pPayload = pPayloadStart; - ENCODE_U32(pPayload, SHRINK_ID(pInfo->TaskID)); - ENCODE_U32(pPayload, pInfo->Prio); - pPayload = _EncodeStr(pPayload, pInfo->sName, 32); - _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_TASK_INFO); - // - pPayload = pPayloadStart; - ENCODE_U32(pPayload, SHRINK_ID(pInfo->TaskID)); - ENCODE_U32(pPayload, pInfo->StackBase); - ENCODE_U32(pPayload, pInfo->StackSize); - ENCODE_U32(pPayload, 0); // Stack End, future use - _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_STACK_INFO); - RECORD_END(); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_SendTaskList() -* -* Function description -* Send all tasks descriptors to the host. -*/ -void SEGGER_SYSVIEW_SendTaskList(void) { - if (_SYSVIEW_Globals.pOSAPI && _SYSVIEW_Globals.pOSAPI->pfSendTaskList) { - _SYSVIEW_Globals.pOSAPI->pfSendTaskList(); - } -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_SendSysDesc() -* -* Function description -* Send the system description string to the host. -* The system description is used by the Systemview Application -* to identify the current application and handle events accordingly. -* -* The system description is usually called by the system description -* callback, to ensure it is only sent when the SystemView Application -* is connected. -* -* Parameters -* sSysDesc - Pointer to the 0-terminated system description string. -* -* Additional information -* One system description string may not exceed SEGGER_SYSVIEW_MAX_STRING_LEN characters. -* Multiple description strings can be recorded. -* -* The Following items can be described in a system description string. -* Each item is identified by its identifier, followed by '=' and the value. -* Items are separated by ','. -*/ -void SEGGER_SYSVIEW_SendSysDesc(const char *sSysDesc) { - U8* pPayload; - U8* pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 1 + SEGGER_SYSVIEW_MAX_STRING_LEN); - // - pPayload = _EncodeStr(pPayloadStart, sSysDesc, SEGGER_SYSVIEW_MAX_STRING_LEN); - _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_SYSDESC); - RECORD_END(); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_RecordSystime() -* -* Function description -* Formats and sends a SystemView Systime containing a single U64 or U32 -* parameter payload. -*/ -void SEGGER_SYSVIEW_RecordSystime(void) { - U64 Systime; - - if (_SYSVIEW_Globals.pOSAPI && _SYSVIEW_Globals.pOSAPI->pfGetTime) { - Systime = _SYSVIEW_Globals.pOSAPI->pfGetTime(); - SEGGER_SYSVIEW_RecordU32x2(SYSVIEW_EVTID_SYSTIME_US, - (U32)(Systime), - (U32)(Systime >> 32)); - } else { - SEGGER_SYSVIEW_RecordU32(SYSVIEW_EVTID_SYSTIME_CYCLES, SEGGER_SYSVIEW_GET_TIMESTAMP()); - } -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_RecordEnterISR() -* -* Function description -* Format and send an ISR entry event. -* -* Additional information -* Example packets sent -* 02 0F 50 // ISR(15) Enter. Timestamp is 80 (0x50) -*/ -void SEGGER_SYSVIEW_RecordEnterISR(void) { - unsigned v; - U8* pPayload; - U8* pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_QUANTA_U32); - // - pPayload = pPayloadStart; - v = SEGGER_SYSVIEW_GET_INTERRUPT_ID(); - ENCODE_U32(pPayload, v); - _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_ISR_ENTER); - RECORD_END(); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_RecordExitISR() -* -* Function description -* Format and send an ISR exit event. -* -* Additional information -* Format as follows: -* 03 // Max. packet len is 6 -* -* Example packets sent -* 03 20 // ISR Exit. Timestamp is 32 (0x20) -*/ -void SEGGER_SYSVIEW_RecordExitISR(void) { - U8* pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE); - // - _SendPacket(pPayloadStart, pPayloadStart, SYSVIEW_EVTID_ISR_EXIT); - RECORD_END(); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_RecordExitISRToScheduler() -* -* Function description -* Format and send an ISR exit into scheduler event. -* -* Additional information -* Format as follows: -* 18 // Max. packet len is 6 -* -* Example packets sent -* 18 20 // ISR Exit to Scheduler. Timestamp is 32 (0x20) -*/ -void SEGGER_SYSVIEW_RecordExitISRToScheduler(void) { - U8* pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE); - // - _SendPacket(pPayloadStart, pPayloadStart, SYSVIEW_EVTID_ISR_TO_SCHEDULER); - RECORD_END(); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_RecordEnterTimer() -* -* Function description -* Format and send a Timer entry event. -* -* Parameters -* TimerId - Id of the timer which starts. -*/ -void SEGGER_SYSVIEW_RecordEnterTimer(U32 TimerId) { - U8* pPayload; - U8* pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_QUANTA_U32); - // - pPayload = pPayloadStart; - ENCODE_U32(pPayload, SHRINK_ID(TimerId)); - _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_TIMER_ENTER); - RECORD_END(); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_RecordExitTimer() -* -* Function description -* Format and send a Timer exit event. -*/ -void SEGGER_SYSVIEW_RecordExitTimer(void) { - U8* pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE); - // - _SendPacket(pPayloadStart, pPayloadStart, SYSVIEW_EVTID_TIMER_EXIT); - RECORD_END(); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_RecordEndCall() -* -* Function description -* Format and send an End API Call event without return value. -* -* Parameters -* EventID - Id of API function which ends. -*/ -void SEGGER_SYSVIEW_RecordEndCall(unsigned int EventID) { - U8* pPayload; - U8* pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_QUANTA_U32); - // - pPayload = pPayloadStart; - ENCODE_U32(pPayload, EventID); - _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_END_CALL); - RECORD_END(); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_RecordEndCallU32() -* -* Function description -* Format and send an End API Call event with return value. -* -* Parameters -* EventID - Id of API function which ends. -* Para0 - Return value which will be returned by the API function. -*/ -void SEGGER_SYSVIEW_RecordEndCallU32(unsigned int EventID, U32 Para0) { - U8* pPayload; - U8* pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 2 * SEGGER_SYSVIEW_QUANTA_U32); - // - pPayload = pPayloadStart; - ENCODE_U32(pPayload, EventID); - ENCODE_U32(pPayload, Para0); - _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_END_CALL); - RECORD_END(); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_OnIdle() -* -* Function description -* Record an Idle event. -*/ -void SEGGER_SYSVIEW_OnIdle(void) { - U8* pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE); - // - _SendPacket(pPayloadStart, pPayloadStart, SYSVIEW_EVTID_IDLE); - RECORD_END(); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_OnTaskCreate() -* -* Function description -* Record a Task Create event. The Task Create event corresponds -* to creating a task in the OS. -* -* Parameters -* TaskId - Task ID of created task. -*/ -void SEGGER_SYSVIEW_OnTaskCreate(U32 TaskId) { - U8* pPayload; - U8* pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_QUANTA_U32); - // - pPayload = pPayloadStart; - TaskId = SHRINK_ID(TaskId); - ENCODE_U32(pPayload, TaskId); - _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_TASK_CREATE); - RECORD_END(); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_OnTaskTerminate() -* -* Function description -* Record a Task termination event. -* The Task termination event corresponds to terminating a task in -* the OS. If the TaskId is the currently active task, -* SEGGER_SYSVIEW_OnTaskStopExec may be used, either. -* -* Parameters -* TaskId - Task ID of terminated task. -*/ -void SEGGER_SYSVIEW_OnTaskTerminate(U32 TaskId) { - U8* pPayload; - U8* pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_QUANTA_U32); - // - pPayload = pPayloadStart; - TaskId = SHRINK_ID(TaskId); - ENCODE_U32(pPayload, TaskId); - _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_TASK_TERMINATE); - RECORD_END(); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_OnTaskStartExec() -* -* Function description -* Record a Task Start Execution event. The Task Start event -* corresponds to when a task has started to execute rather than -* when it is ready to execute. -* -* Parameters -* TaskId - Task ID of task that started to execute. -*/ -void SEGGER_SYSVIEW_OnTaskStartExec(U32 TaskId) { - U8* pPayload; - U8* pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_QUANTA_U32); - // - pPayload = pPayloadStart; - TaskId = SHRINK_ID(TaskId); - ENCODE_U32(pPayload, TaskId); - _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_TASK_START_EXEC); - RECORD_END(); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_OnTaskStopExec() -* -* Function description -* Record a Task Stop Execution event. The Task Stop event -* corresponds to when a task stops executing and terminates. -*/ -void SEGGER_SYSVIEW_OnTaskStopExec(void) { - U8* pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE); - // - _SendPacket(pPayloadStart, pPayloadStart, SYSVIEW_EVTID_TASK_STOP_EXEC); - RECORD_END(); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_OnTaskStartReady() -* -* Function description -* Record a Task Start Ready event. -* -* Parameters -* TaskId - Task ID of task that started to execute. -*/ -void SEGGER_SYSVIEW_OnTaskStartReady(U32 TaskId) { - U8* pPayload; - U8* pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_QUANTA_U32); - // - pPayload = pPayloadStart; - TaskId = SHRINK_ID(TaskId); - ENCODE_U32(pPayload, TaskId); - _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_TASK_START_READY); - RECORD_END(); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_OnTaskStopReady() -* -* Function description -* Record a Task Stop Ready event. -* -* Parameters -* TaskId - Task ID of task that completed execution. -* Cause - Reason for task to stop (i.e. Idle/Sleep) -*/ -void SEGGER_SYSVIEW_OnTaskStopReady(U32 TaskId, unsigned int Cause) { - U8* pPayload; - U8* pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 2 * SEGGER_SYSVIEW_QUANTA_U32); - // - pPayload = pPayloadStart; - TaskId = SHRINK_ID(TaskId); - ENCODE_U32(pPayload, TaskId); - ENCODE_U32(pPayload, Cause); - _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_TASK_STOP_READY); - RECORD_END(); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_MarkStart() -* -* Function description -* Record a Performance Marker Start event to start measuring runtime. -* -* Parameters -* MarkerId - User defined ID for the marker. -*/ -void SEGGER_SYSVIEW_MarkStart(unsigned MarkerId) { - U8* pPayload; - U8* pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_QUANTA_U32); - // - pPayload = pPayloadStart; - ENCODE_U32(pPayload, MarkerId); - _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_MARK_START); - RECORD_END(); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_MarkStop() -* -* Function description -* Record a Performance Marker Stop event to stop measuring runtime. -* -* Parameters -* MarkerId - User defined ID for the marker. -*/ -void SEGGER_SYSVIEW_MarkStop(unsigned MarkerId) { - U8 * pPayload; - U8 * pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_QUANTA_U32); - // - pPayload = pPayloadStart; - ENCODE_U32(pPayload, MarkerId); - _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_MARK_STOP); - RECORD_END(); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_Mark() -* -* Function description -* Record a Performance Marker intermediate event. -* -* Parameters -* MarkerId - User defined ID for the marker. -*/ -void SEGGER_SYSVIEW_Mark(unsigned int MarkerId) { - U8* pPayload; - U8* pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 2 * SEGGER_SYSVIEW_QUANTA_U32); - // - pPayload = pPayloadStart; - ENCODE_U32(pPayload, SYSVIEW_EVTID_EX_MARK); - ENCODE_U32(pPayload, MarkerId); - _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_EX); - RECORD_END(); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_NameMarker() -* -* Function description -* Send the name of a Performance Marker to be displayed in SystemView. -* -* Marker names are usually set in the system description -* callback, to ensure it is only sent when the SystemView Application -* is connected. -* -* Parameters -* MarkerId - User defined ID for the marker. -* sName - Pointer to the marker name. (Max. SEGGER_SYSVIEW_MAX_STRING_LEN Bytes) -*/ -void SEGGER_SYSVIEW_NameMarker(unsigned int MarkerId, const char* sName) { - U8* pPayload; - U8* pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 2 * SEGGER_SYSVIEW_QUANTA_U32 + 1 + SEGGER_SYSVIEW_MAX_STRING_LEN); - // - pPayload = pPayloadStart; - ENCODE_U32(pPayload, SYSVIEW_EVTID_EX_NAME_MARKER); - ENCODE_U32(pPayload, MarkerId); - pPayload = _EncodeStr(pPayload, sName, SEGGER_SYSVIEW_MAX_STRING_LEN); - _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_EX); - RECORD_END(); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_NameResource() -* -* Function description -* Send the name of a resource to be displayed in SystemView. -* -* Marker names are usually set in the system description -* callback, to ensure it is only sent when the SystemView Application -* is connected. -* -* Parameters -* ResourceId - Id of the resource to be named. i.e. its address. -* sName - Pointer to the resource name. (Max. SEGGER_SYSVIEW_MAX_STRING_LEN Bytes) -*/ -void SEGGER_SYSVIEW_NameResource(U32 ResourceId, const char* sName) { - U8* pPayload; - U8* pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_QUANTA_U32 + 1 + SEGGER_SYSVIEW_MAX_STRING_LEN); - // - pPayload = pPayloadStart; - ENCODE_U32(pPayload, SHRINK_ID(ResourceId)); - pPayload = _EncodeStr(pPayload, sName, SEGGER_SYSVIEW_MAX_STRING_LEN); - _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_NAME_RESOURCE); - RECORD_END(); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_SendPacket() -* -* Function description -* Send an event packet. -* -* Parameters -* pPacket - Pointer to the start of the packet. -* pPayloadEnd - Pointer to the end of the payload. -* Make sure there are at least 5 bytes free after the payload. -* EventId - Id of the event packet. -* -* Return value -* !=0: Success, Message sent. -* ==0: Buffer full, Message *NOT* sent. -*/ -int SEGGER_SYSVIEW_SendPacket(U8* pPacket, U8* pPayloadEnd, unsigned int EventId) { -#if (SEGGER_SYSVIEW_USE_STATIC_BUFFER == 1) - SEGGER_SYSVIEW_LOCK(); -#endif - _SendPacket(pPacket + 4, pPayloadEnd, EventId); -#if (SEGGER_SYSVIEW_USE_STATIC_BUFFER == 1) - SEGGER_SYSVIEW_UNLOCK(); -#endif - return 0; -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_EncodeU32() -* -* Function description -* Encode a U32 in variable-length format. -* -* Parameters -* pPayload - Pointer to where U32 will be encoded. -* Value - The 32-bit value to be encoded. -* -* Return value -* Pointer to the byte following the value, i.e. the first free -* byte in the payload and the next position to store payload -* content. -*/ -U8* SEGGER_SYSVIEW_EncodeU32(U8* pPayload, U32 Value) { - ENCODE_U32(pPayload, Value); - return pPayload; -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_EncodeString() -* -* Function description -* Encode a string in variable-length format. -* -* Parameters -* pPayload - Pointer to where string will be encoded. -* s - String to encode. -* MaxLen - Maximum number of characters to encode from string. -* -* Return value -* Pointer to the byte following the value, i.e. the first free -* byte in the payload and the next position to store payload -* content. -* -* Additional information -* The string is encoded as a count byte followed by the contents -* of the string. -* No more than 1 + MaxLen bytes will be encoded to the payload. -*/ -U8* SEGGER_SYSVIEW_EncodeString(U8* pPayload, const char* s, unsigned int MaxLen) { - return _EncodeStr(pPayload, s, MaxLen); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_EncodeData() -* -* Function description -* Encode a byte buffer in variable-length format. -* -* Parameters -* pPayload - Pointer to where string will be encoded. -* pSrc - Pointer to data buffer to be encoded. -* NumBytes - Number of bytes in the buffer to be encoded. -* -* Return value -* Pointer to the byte following the value, i.e. the first free -* byte in the payload and the next position to store payload -* content. -* -* Additional information -* The data is encoded as a count byte followed by the contents -* of the data buffer. -* Make sure NumBytes + 1 bytes are free for the payload. -*/ -U8* SEGGER_SYSVIEW_EncodeData(U8 *pPayload, const char* pSrc, unsigned int NumBytes) { - return _EncodeData(pPayload, pSrc, NumBytes); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_EncodeId() -* -* Function description -* Encode a 32-bit Id in shrunken variable-length format. -* -* Parameters -* pPayload - Pointer to where the Id will be encoded. -* Id - The 32-bit value to be encoded. -* -* Return value -* Pointer to the byte following the value, i.e. the first free -* byte in the payload and the next position to store payload -* content. -* -* Additional information -* The parameters to shrink an Id can be configured in -* SEGGER_SYSVIEW_Conf.h and via SEGGER_SYSVIEW_SetRAMBase(). -* SEGGER_SYSVIEW_ID_BASE: Lowest Id reported by the application. -* (i.e. 0x20000000 when all Ids are an address in this RAM) -* SEGGER_SYSVIEW_ID_SHIFT: Number of bits to shift the Id to -* save bandwidth. (i.e. 2 when Ids are 4 byte aligned) -*/ -U8* SEGGER_SYSVIEW_EncodeId(U8* pPayload, U32 Id) { - Id = SHRINK_ID(Id); - ENCODE_U32(pPayload, Id); - return pPayload; -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_ShrinkId() -* -* Function description -* Get the shrunken value of an Id for further processing like in -* SEGGER_SYSVIEW_NameResource(). -* -* Parameters -* Id - The 32-bit value to be shrunken. -* -* Return value -* Shrunken Id. -* -* Additional information -* The parameters to shrink an Id can be configured in -* SEGGER_SYSVIEW_Conf.h and via SEGGER_SYSVIEW_SetRAMBase(). -* SEGGER_SYSVIEW_ID_BASE: Lowest Id reported by the application. -* (i.e. 0x20000000 when all Ids are an address in this RAM) -* SEGGER_SYSVIEW_ID_SHIFT: Number of bits to shift the Id to -* save bandwidth. (i.e. 2 when Ids are 4 byte aligned) -*/ -U32 SEGGER_SYSVIEW_ShrinkId(U32 Id) { - return SHRINK_ID(Id); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_RegisterModule() -* -* Function description -* Register a middleware module for recording its events. -* -* Parameters -* pModule - The middleware module information. -* -* Additional information -* SEGGER_SYSVIEW_MODULE elements: -* sDescription - Pointer to a string containing the module name and optionally the module event description. -* NumEvents - Number of events the module wants to register. -* EventOffset - Offset to be added to the event Ids. Out parameter, set by this function. Do not modify after calling this function. -* pfSendModuleDesc - Callback function pointer to send more detailed module description to SystemView Application. -* pNext - Pointer to next registered module. Out parameter, set by this function. Do not modify after calling this function. -*/ -void SEGGER_SYSVIEW_RegisterModule(SEGGER_SYSVIEW_MODULE* pModule) { - SEGGER_SYSVIEW_LOCK(); - if (_pFirstModule == 0) { - // - // No module registered, yet. - // Start list with new module. - // EventOffset is the base offset for modules - // - pModule->EventOffset = MODULE_EVENT_OFFSET; - pModule->pNext = 0; - _pFirstModule = pModule; - _NumModules = 1; - } else { - // - // Registreded module(s) present. - // Prepend new module in list. - // EventOffset set from number of events and offset of previous module. - // - pModule->EventOffset = _pFirstModule->EventOffset + _pFirstModule->NumEvents; - pModule->pNext = _pFirstModule; - _pFirstModule = pModule; - _NumModules++; - } - SEGGER_SYSVIEW_SendModule(0); - if (pModule->pfSendModuleDesc) { - pModule->pfSendModuleDesc(); - } - SEGGER_SYSVIEW_UNLOCK(); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_RecordModuleDescription() -* -* Function description -* Sends detailed information of a registered module to the host. -* -* Parameters -* pModule - Pointer to the described module. -* sDescription - Pointer to a description string. -*/ -void SEGGER_SYSVIEW_RecordModuleDescription(const SEGGER_SYSVIEW_MODULE* pModule, const char* sDescription) { - U8 ModuleId; - SEGGER_SYSVIEW_MODULE* p; - - p = _pFirstModule; - ModuleId = 0; - do { - if (p == pModule) { - break; - } - ModuleId++; - p = p->pNext; - } while (p); - { - U8* pPayload; - U8* pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 2 * SEGGER_SYSVIEW_QUANTA_U32 + 1 + SEGGER_SYSVIEW_MAX_STRING_LEN); - // - pPayload = pPayloadStart; - // - // Send module description - // Send event offset and number of events - // - ENCODE_U32(pPayload, ModuleId); - ENCODE_U32(pPayload, (pModule->EventOffset)); - pPayload = _EncodeStr(pPayload, sDescription, SEGGER_SYSVIEW_MAX_STRING_LEN); - _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_MODULEDESC); - RECORD_END(); - } -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_SendModule() -* -* Function description -* Sends the information of a registered module to the host. -* -* Parameters -* ModuleId - Id of the requested module. -*/ -void SEGGER_SYSVIEW_SendModule(U8 ModuleId) { - SEGGER_SYSVIEW_MODULE* pModule; - U32 n; - - if (_pFirstModule != 0) { - pModule = _pFirstModule; - for (n = 0; n < ModuleId; n++) { - pModule = pModule->pNext; - if (pModule == 0) { - break; - } - } - if (pModule != 0) { - U8* pPayload; - U8* pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 2 * SEGGER_SYSVIEW_QUANTA_U32 + 1 + SEGGER_SYSVIEW_MAX_STRING_LEN); - // - pPayload = pPayloadStart; - // - // Send module description - // Send event offset and number of events - // - ENCODE_U32(pPayload, ModuleId); - ENCODE_U32(pPayload, (pModule->EventOffset)); - pPayload = _EncodeStr(pPayload, pModule->sModule, SEGGER_SYSVIEW_MAX_STRING_LEN); - _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_MODULEDESC); - RECORD_END(); - } - } -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_SendModuleDescription() -* -* Function description -* Triggers a send of the registered module descriptions. -* -*/ -void SEGGER_SYSVIEW_SendModuleDescription(void) { - SEGGER_SYSVIEW_MODULE* pModule; - - if (_pFirstModule != 0) { - pModule = _pFirstModule; - do { - if (pModule->pfSendModuleDesc) { - pModule->pfSendModuleDesc(); - } - pModule = pModule->pNext; - } while (pModule); - } -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_SendNumModules() -* -* Function description -* Send the number of registered modules to the host. -*/ -void SEGGER_SYSVIEW_SendNumModules(void) { - U8* pPayload; - U8* pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 2*SEGGER_SYSVIEW_QUANTA_U32); - pPayload = pPayloadStart; - ENCODE_U32(pPayload, _NumModules); - _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_NUMMODULES); - RECORD_END(); -} - -#ifndef SEGGER_SYSVIEW_EXCLUDE_PRINTF // Define in project to avoid warnings about variable parameter list - -/********************************************************************* -* -* SEGGER_SYSVIEW_PrintfHostEx() -* -* Function description -* Print a string which is formatted on the host by the SystemView Application -* with Additional information. -* -* Parameters -* s - String to be formatted. -* Options - Options for the string. i.e. Log level. -* -* Additional information -* All format arguments are treated as 32-bit scalar values. -*/ -void SEGGER_SYSVIEW_PrintfHostEx(const char* s, U32 Options, ...) { - va_list ParamList; -#if SEGGER_SYSVIEW_PRINTF_IMPLICIT_FORMAT - int r; - - va_start(ParamList, Options); - r = _VPrintHost(s, Options, &ParamList); - va_end(ParamList); - - if (r == -1) { - va_start(ParamList, Options); - _VPrintTarget(s, Options, &ParamList); - va_end(ParamList); - } -#else - va_start(ParamList, Options); - _VPrintHost(s, Options, &ParamList); - va_end(ParamList); -#endif -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_PrintfHost() -* -* Function description -* Print a string which is formatted on the host by the SystemView Application. -* -* Parameters -* s - String to be formatted. -* -* Additional information -* All format arguments are treated as 32-bit scalar values. -*/ -void SEGGER_SYSVIEW_PrintfHost(const char* s, ...) { - va_list ParamList; -#if SEGGER_SYSVIEW_PRINTF_IMPLICIT_FORMAT - int r; - - va_start(ParamList, s); - r = _VPrintHost(s, SEGGER_SYSVIEW_LOG, &ParamList); - va_end(ParamList); - - if (r == -1) { - va_start(ParamList, s); - _VPrintTarget(s, SEGGER_SYSVIEW_LOG, &ParamList); - va_end(ParamList); - } -#else - va_start(ParamList, s); - _VPrintHost(s, SEGGER_SYSVIEW_LOG, &ParamList); - va_end(ParamList); -#endif -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_WarnfHost() -* -* Function description -* Print a warnin string which is formatted on the host by -* the SystemView Application. -* -* Parameters -* s - String to be formatted. -* -* Additional information -* All format arguments are treated as 32-bit scalar values. -*/ -void SEGGER_SYSVIEW_WarnfHost(const char* s, ...) { - va_list ParamList; -#if SEGGER_SYSVIEW_PRINTF_IMPLICIT_FORMAT - int r; - - va_start(ParamList, s); - r = _VPrintHost(s, SEGGER_SYSVIEW_WARNING, &ParamList); - va_end(ParamList); - - if (r == -1) { - va_start(ParamList, s); - _VPrintTarget(s, SEGGER_SYSVIEW_WARNING, &ParamList); - va_end(ParamList); - } -#else - va_start(ParamList, s); - _VPrintHost(s, SEGGER_SYSVIEW_WARNING, &ParamList); - va_end(ParamList); -#endif -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_ErrorfHost() -* -* Function description -* Print an error string which is formatted on the host by -* the SystemView Application. -* -* Parameters -* s - String to be formatted. -* -* Additional information -* All format arguments are treated as 32-bit scalar values. -*/ -void SEGGER_SYSVIEW_ErrorfHost(const char* s, ...) { - va_list ParamList; -#if SEGGER_SYSVIEW_PRINTF_IMPLICIT_FORMAT - int r; - - va_start(ParamList, s); - r = _VPrintHost(s, SEGGER_SYSVIEW_ERROR, &ParamList); - va_end(ParamList); - - if (r == -1) { - va_start(ParamList, s); - _VPrintTarget(s, SEGGER_SYSVIEW_ERROR, &ParamList); - va_end(ParamList); - } -#else - va_start(ParamList, s); - _VPrintHost(s, SEGGER_SYSVIEW_ERROR, &ParamList); - va_end(ParamList); -#endif -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_PrintfTargetEx() -* -* Function description -* Print a string which is formatted on the target before sent to -* the host with Additional information. -* -* Parameters -* s - String to be formatted. -* Options - Options for the string. i.e. Log level. -*/ -void SEGGER_SYSVIEW_PrintfTargetEx(const char* s, U32 Options, ...) { - va_list ParamList; - - va_start(ParamList, Options); - _VPrintTarget(s, Options, &ParamList); - va_end(ParamList); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_PrintfTarget() -* -* Function description -* Print a string which is formatted on the target before sent to -* the host. -* -* Parameters -* s - String to be formatted. -*/ -void SEGGER_SYSVIEW_PrintfTarget(const char* s, ...) { - va_list ParamList; - - va_start(ParamList, s); - _VPrintTarget(s, SEGGER_SYSVIEW_LOG, &ParamList); - va_end(ParamList); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_WarnfTarget() -* -* Function description -* Print a warning string which is formatted on the target before -* sent to the host. -* -* Parameters -* s - String to be formatted. -*/ -void SEGGER_SYSVIEW_WarnfTarget(const char* s, ...) { - va_list ParamList; - - va_start(ParamList, s); - _VPrintTarget(s, SEGGER_SYSVIEW_WARNING, &ParamList); - va_end(ParamList); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_ErrorfTarget() -* -* Function description -* Print an error string which is formatted on the target before -* sent to the host. -* -* Parameters -* s - String to be formatted. -*/ -void SEGGER_SYSVIEW_ErrorfTarget(const char* s, ...) { - va_list ParamList; - - va_start(ParamList, s); - _VPrintTarget(s, SEGGER_SYSVIEW_ERROR, &ParamList); - va_end(ParamList); -} -#endif // SEGGER_SYSVIEW_EXCLUDE_PRINTF - -/********************************************************************* -* -* SEGGER_SYSVIEW_Print() -* -* Function description -* Print a string to the host. -* -* Parameters -* s - String to sent. -*/ -void SEGGER_SYSVIEW_Print(const char* s) { - U8* pPayload; - U8* pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 2 * SEGGER_SYSVIEW_QUANTA_U32 + SEGGER_SYSVIEW_MAX_STRING_LEN); - // - pPayload = _EncodeStr(pPayloadStart, s, SEGGER_SYSVIEW_MAX_STRING_LEN); - ENCODE_U32(pPayload, SEGGER_SYSVIEW_LOG); - ENCODE_U32(pPayload, 0); - _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_PRINT_FORMATTED); - RECORD_END(); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_Warn() -* -* Function description -* Print a warning string to the host. -* -* Parameters -* s - String to sent. -*/ -void SEGGER_SYSVIEW_Warn(const char* s) { - U8* pPayload; - U8* pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 2 * SEGGER_SYSVIEW_QUANTA_U32 + SEGGER_SYSVIEW_MAX_STRING_LEN); - // - pPayload = _EncodeStr(pPayloadStart, s, SEGGER_SYSVIEW_MAX_STRING_LEN); - ENCODE_U32(pPayload, SEGGER_SYSVIEW_WARNING); - ENCODE_U32(pPayload, 0); - _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_PRINT_FORMATTED); - RECORD_END(); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_Error() -* -* Function description -* Print an error string to the host. -* -* Parameters -* s - String to sent. -*/ -void SEGGER_SYSVIEW_Error(const char* s) { - U8* pPayload; - U8* pPayloadStart; - RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 2 * SEGGER_SYSVIEW_QUANTA_U32 + SEGGER_SYSVIEW_MAX_STRING_LEN); - // - pPayload = _EncodeStr(pPayloadStart, s, SEGGER_SYSVIEW_MAX_STRING_LEN); - ENCODE_U32(pPayload, SEGGER_SYSVIEW_ERROR); - ENCODE_U32(pPayload, 0); - _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_PRINT_FORMATTED); - RECORD_END(); -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_EnableEvents() -* -* Function description -* Enable standard SystemView events to be generated. -* -* Parameters -* EnableMask - Events to be enabled. -*/ -void SEGGER_SYSVIEW_EnableEvents(U32 EnableMask) { - _SYSVIEW_Globals.DisabledEvents &= ~EnableMask; -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_DisableEvents() -* -* Function description -* Disable standard SystemView events to not be generated. -* -* Parameters -* DisableMask - Events to be disabled. -*/ -void SEGGER_SYSVIEW_DisableEvents(U32 DisableMask) { - _SYSVIEW_Globals.DisabledEvents |= DisableMask; -} - -/********************************************************************* -* -* SEGGER_SYSVIEW_IsStarted() -* -* Function description -* Handle incoming packets if any and check if recording is started. -* -* Return value -* 0: Recording not started. -* > 0: Recording started. -*/ -int SEGGER_SYSVIEW_IsStarted(void) { -#if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) - // - // Check if host is sending data which needs to be processed. - // - if (SEGGER_RTT_HASDATA(CHANNEL_ID_DOWN)) { - if (_SYSVIEW_Globals.RecursionCnt == 0) { // Avoid uncontrolled nesting. This way, this routine can call itself once, but no more often than that. - _SYSVIEW_Globals.RecursionCnt = 1; - _HandleIncomingPacket(); - _SYSVIEW_Globals.RecursionCnt = 0; - } - } -#endif - return _SYSVIEW_Globals.EnableState; -} - - -/*************************** End of file ****************************/ +/********************************************************************* +* SEGGER Microcontroller GmbH * +* The Embedded Experts * +********************************************************************** +* * +* (c) 1995 - 2019 SEGGER Microcontroller GmbH * +* * +* www.segger.com Support: support@segger.com * +* * +********************************************************************** +* * +* SEGGER SystemView * Real-time application analysis * +* * +********************************************************************** +* * +* All rights reserved. * +* * +* SEGGER strongly recommends to not make any changes * +* to or modify the source code of this software in order to stay * +* compatible with the SystemView and RTT protocol, and J-Link. * +* * +* Redistribution and use in source and binary forms, with or * +* without modification, are permitted provided that the following * +* condition is met: * +* * +* o Redistributions of source code must retain the above copyright * +* notice, this condition and the following disclaimer. * +* * +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND * +* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * +* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * +* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * +* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR * +* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * +* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * +* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * +* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * +* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE * +* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH * +* DAMAGE. * +* * +********************************************************************** +* * +* SystemView version: 3.20 * +* * +********************************************************************** +-------------------------- END-OF-HEADER ----------------------------- + +File : SEGGER_SYSVIEW.c +Purpose : System visualization API implementation. +Revision: $Rev: 21281 $ + +Additional information: + Packet format: + Packets with IDs 0..23 are standard packets with known structure. + For efficiency, they do *NOT* contain a length field. + + + Packets with IDs 24..31 are standard packets with extendible + structure and contain a length field. + + + Packet ID 31 is used for SystemView extended events. + + + Packets with IDs >= 32 always contain a length field. + + + Packet IDs: + 0.. 31 : Standard packets, known by SystemView. + 32..1023 : OS-definable packets, described in a SystemView description file. + 1024..2047 : User-definable packets, described in a SystemView description file. + 2048..32767: Undefined. + + Data encoding: + Basic types (int, short, char, ...): + Basic types are encoded little endian with most-significant bit variant + encoding. + Each encoded byte contains 7 data bits [6:0] and the MSB continuation bit. + The continuation bit indicates whether the next byte belongs to the data + (bit set) or this is the last byte (bit clear). + The most significant bits of data are encoded first, proceeding to the + least significant bits in the final byte (little endian). + + Example encoding: + Data: 0x1F4 (500) + Encoded: 0xF4 (First 7 data bits 74 | Continuation bit) + 0x03 (Second 7 data bits 03, no continuation) + + Data: 0xFFFFFFFF + Encoded: 0xFF 0xFF 0xFF 0xFF 0x0F + + Data: 0xA2 (162), 0x03 (3), 0x7000 + Encoded: 0xA2 0x01 0x03 0x80 0xE0 0x01 + + Byte arrays and strings: + Byte arrays and strings are encoded as followed by the raw data. + NumBytes is encoded as a basic type with a theoretical maximum of 4G. + + Example encoding: + Data: "Hello World\0" (0x48 0x65 0x6C 0x6C 0x6F 0x20 0x57 0x6F 0x72 0x6C 0x64 0x00) + Encoded: 0x0B 0x48 0x65 0x6C 0x6C 0x6F 0x20 0x57 0x6F 0x72 0x6C 0x64 + + Examples packets: + 01 F4 03 80 80 10 // Overflow packet. Data is a single U32. + This packet means: 500 packets lost, Timestamp is 0x40000 + + 02 0F 50 // ISR(15) Enter. Timestamp 80 (0x50) + + 03 20 // ISR Exit. Timestamp 32 (0x20) (Shortest possible packet.) + + Sample code for user defined Packets: + #define MY_ID 0x400 // Any value between 0x400 and 0x7FF + void SendMyPacket(unsigned Para0, unsigned Para1, const char* s) { + U8 aPacket[SEGGER_SYSVIEW_INFO_SIZE + 2 * SEGGER_SYSVIEW_QUANTA_U32 + MAX_STR_LEN + 1]; + U8* pPayload; + // + pPayload = SEGGER_SYSVIEW_PPREPARE_PACKET(aPacket); // Prepare the packet for SystemView + pPayload = SEGGER_SYSVIEW_EncodeU32(pPayload, Para0); // Add the first parameter to the packet + pPayload = SEGGER_SYSVIEW_EncodeU32(pPayload, Para1); // Add the second parameter to the packet + pPayload = SEGGER_SYSVIEW_EncodeString(pPayload, s, MAX_STR_LEN); // Add the string to the packet + // + SEGGER_SYSVIEW_SendPacket(&aPacket[0], pPayload, MY_ID); // Send the packet with EventId = MY_ID + } + + #define MY_ID_1 0x401 + void SendOnePara(unsigned Para0) { + SEGGER_SYSVIEW_RecordU32(MY_ID_1, Para0); + } + +*/ + +/********************************************************************* +* +* #include section +* +********************************************************************** +*/ + +#define SEGGER_SYSVIEW_C // For EXTERN statements in SEGGER_SYSVIEW.h + +#include +#include +#include +#include "SEGGER_SYSVIEW_Int.h" +#include "SEGGER_RTT.h" + +/********************************************************************* +* +* Defines, fixed +* +********************************************************************** +*/ +#if SEGGER_SYSVIEW_ID_SHIFT + #define SHRINK_ID(Id) (((Id) - _SYSVIEW_Globals.RAMBaseAddress) >> SEGGER_SYSVIEW_ID_SHIFT) +#else + #define SHRINK_ID(Id) ((Id) - _SYSVIEW_Globals.RAMBaseAddress) +#endif + +#if SEGGER_SYSVIEW_RTT_CHANNEL > 0 + #define CHANNEL_ID_UP SEGGER_SYSVIEW_RTT_CHANNEL + #define CHANNEL_ID_DOWN SEGGER_SYSVIEW_RTT_CHANNEL +#else + #define CHANNEL_ID_UP _SYSVIEW_Globals.UpChannel + #define CHANNEL_ID_DOWN _SYSVIEW_Globals.DownChannel +#endif + +#if SEGGER_SYSVIEW_CPU_CACHE_LINE_SIZE + #if (SEGGER_SYSVIEW_RTT_BUFFER_SIZE % SEGGER_SYSVIEW_CPU_CACHE_LINE_SIZE) + #error "SEGGER_SYSVIEW_RTT_BUFFER_SIZE must be a multiple of SEGGER_SYSVIEW_CPU_CACHE_LINE_SIZE" + #endif +#endif + +/********************************************************************* +* +* Defines, configurable +* +********************************************************************** +*/ +// Timestamps may be less than full 32-bits, in which case we need to zero +// the unused bits to properly handle overflows. +// Note that this is a quite common scenario, as a 32-bit time such as +// SysTick might be scaled down to reduce bandwith +// or a 16-bit hardware time might be used. +#if SEGGER_SYSVIEW_TIMESTAMP_BITS < 32 // Eliminate unused bits in case hardware timestamps are less than 32 bits + #define MAKE_DELTA_32BIT(Delta) Delta <<= 32 - SEGGER_SYSVIEW_TIMESTAMP_BITS; \ + Delta >>= 32 - SEGGER_SYSVIEW_TIMESTAMP_BITS; +#else + #define MAKE_DELTA_32BIT(Delta) +#endif + + +/********************************************************************* +* +* Defines, fixed +* +********************************************************************** +*/ +#define ENABLE_STATE_OFF 0 +#define ENABLE_STATE_ON 1 +#define ENABLE_STATE_DROPPING 2 + +#define FORMAT_FLAG_LEFT_JUSTIFY (1u << 0) +#define FORMAT_FLAG_PAD_ZERO (1u << 1) +#define FORMAT_FLAG_PRINT_SIGN (1u << 2) +#define FORMAT_FLAG_ALTERNATE (1u << 3) + +#define MODULE_EVENT_OFFSET (512) + +/********************************************************************* +* +* Types, local +* +********************************************************************** +*/ +typedef struct { + U8* pBuffer; + U8* pPayload; + U8* pPayloadStart; + U32 Options; + unsigned Cnt; +} SEGGER_SYSVIEW_PRINTF_DESC; + +typedef struct { + U8 EnableState; // 0: Disabled, 1: Enabled, (2: Dropping) + U8 UpChannel; + U8 RecursionCnt; + U32 SysFreq; + U32 CPUFreq; + U32 LastTxTimeStamp; + U32 RAMBaseAddress; +#if (SEGGER_SYSVIEW_POST_MORTEM_MODE == 1) + U32 PacketCount; +#else + U32 DropCount; + U8 DownChannel; +#endif + U32 DisabledEvents; + const SEGGER_SYSVIEW_OS_API* pOSAPI; + SEGGER_SYSVIEW_SEND_SYS_DESC_FUNC* pfSendSysDesc; +} SEGGER_SYSVIEW_GLOBALS; + +/********************************************************************* +* +* Function prototypes, required +* +********************************************************************** +*/ +static void _SendPacket(U8* pStartPacket, U8* pEndPacket, unsigned int EventId); + +/********************************************************************* +* +* Static data +* +********************************************************************** +*/ +static const U8 _abSync[10] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; + +#if SEGGER_SYSVIEW_CPU_CACHE_LINE_SIZE + #ifdef SEGGER_SYSVIEW_SECTION + // + // Alignment + special section required + // + #if (defined __GNUC__) + __attribute__ ((section (SEGGER_SYSVIEW_SECTION), aligned (SEGGER_SYSVIEW_CPU_CACHE_LINE_SIZE))) static char _UpBuffer [SEGGER_SYSVIEW_RTT_BUFFER_SIZE]; + #if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) + __attribute__ ((section (SEGGER_SYSVIEW_SECTION), aligned (SEGGER_SYSVIEW_CPU_CACHE_LINE_SIZE))) static char _DownBuffer[8]; // Small, fixed-size buffer, for back-channel comms + #endif + #elif (defined __ICCARM__) || (defined __ICCRX__) + #pragma location=SEGGER_SYSVIEW_SECTION + #pragma data_alignment=SEGGER_RTT_CPU_CACHE_LINE_SIZE + static char _UpBuffer [SEGGER_SYSVIEW_RTT_BUFFER_SIZE]; + #if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) + #pragma location=SEGGER_SYSVIEW_SECTION + #pragma data_alignment=SEGGER_RTT_CPU_CACHE_LINE_SIZE + static char _DownBuffer[8]; // Small, fixed-size buffer, for back-channel comms + #endif + #elif (defined __CC_ARM) + __attribute__ ((section (SEGGER_SYSVIEW_SECTION), aligned (SEGGER_SYSVIEW_CPU_CACHE_LINE_SIZE), zero_init)) static char _UpBuffer [SEGGER_SYSVIEW_RTT_BUFFER_SIZE]; + #if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) + __attribute__ ((section (SEGGER_SYSVIEW_SECTION), aligned (SEGGER_SYSVIEW_CPU_CACHE_LINE_SIZE), zero_init)) static char _DownBuffer[8]; // Small, fixed-size buffer, for back-channel comms + #endif + #else + #error "Do not know how to place SystemView buffers in specific section" + #endif + #else + // + // Only alignment required + // + #if (defined __GNUC__) + __attribute__ ((aligned (SEGGER_SYSVIEW_CPU_CACHE_LINE_SIZE))) static char _UpBuffer [SEGGER_SYSVIEW_RTT_BUFFER_SIZE]; + #if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) + __attribute__ ((aligned (SEGGER_SYSVIEW_CPU_CACHE_LINE_SIZE))) static char _DownBuffer[8]; // Small, fixed-size buffer, for back-channel comms + #endif + #elif (defined __ICCARM__) || (defined __ICCRX__) + #pragma data_alignment=SEGGER_RTT_CPU_CACHE_LINE_SIZE + static char _UpBuffer [SEGGER_SYSVIEW_RTT_BUFFER_SIZE]; + #if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) + #pragma data_alignment=SEGGER_RTT_CPU_CACHE_LINE_SIZE + static char _DownBuffer[8]; // Small, fixed-size buffer, for back-channel comms + #endif + #elif (defined __CC_ARM) + __attribute__ ((aligned (SEGGER_SYSVIEW_CPU_CACHE_LINE_SIZE), zero_init)) static char _UpBuffer [SEGGER_SYSVIEW_RTT_BUFFER_SIZE]; + #if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) + __attribute__ ((aligned (SEGGER_SYSVIEW_CPU_CACHE_LINE_SIZE), zero_init)) static char _DownBuffer[8]; // Small, fixed-size buffer, for back-channel comms + #endif + #else + #error "Do not know how to align SystemView buffers to cache line size" + #endif + #endif +#else + #ifdef SEGGER_SYSVIEW_SECTION + // + // Only special section required + // + #if (defined __GNUC__) + __attribute__ ((section (SEGGER_SYSVIEW_SECTION))) static char _UpBuffer [SEGGER_SYSVIEW_RTT_BUFFER_SIZE]; + #if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) + __attribute__ ((section (SEGGER_SYSVIEW_SECTION))) static char _DownBuffer[8]; // Small, fixed-size buffer, for back-channel comms + #endif + #elif (defined __ICCARM__) || (defined __ICCRX__) + #pragma location=SEGGER_SYSVIEW_SECTION + static char _UpBuffer [SEGGER_SYSVIEW_RTT_BUFFER_SIZE]; + #if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) + #pragma location=SEGGER_SYSVIEW_SECTION + static char _DownBuffer[8]; // Small, fixed-size buffer, for back-channel comms + #endif + #elif (defined __CC_ARM) + __attribute__ ((section (SEGGER_SYSVIEW_SECTION), zero_init)) static char _UpBuffer [SEGGER_SYSVIEW_RTT_BUFFER_SIZE]; + #if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) + __attribute__ ((section (SEGGER_SYSVIEW_SECTION), zero_init)) static char _DownBuffer[8]; // Small, fixed-size buffer, for back-channel comms + #endif + #else + #error "Do not know how to place SystemView buffers in specific section" + #endif + #else + // + // Neither special section nor alignment required + // + static char _UpBuffer [SEGGER_SYSVIEW_RTT_BUFFER_SIZE]; + #if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) + static char _DownBuffer[8]; // Small, fixed-size buffer, for back-channel comms + #endif + #endif +#endif + +#ifdef SEGGER_SYSVIEW_SECTION + #if (defined __GNUC__) + __attribute__ ((section (SEGGER_SYSVIEW_SECTION))) static char _UpBuffer [SEGGER_SYSVIEW_RTT_BUFFER_SIZE]; + #if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) + __attribute__ ((section (SEGGER_SYSVIEW_SECTION))) static char _DownBuffer[8]; // Small, fixed-size buffer, for back-channel comms + #endif + #elif (defined __ICCARM__) || (defined __ICCRX__) + #pragma location=SEGGER_SYSVIEW_SECTION + static char _UpBuffer [SEGGER_SYSVIEW_RTT_BUFFER_SIZE]; + #pragma location=SEGGER_SYSVIEW_SECTION + static char _DownBuffer[8]; // Small, fixed-size buffer, for back-channel comms + #elif (defined __CC_ARM) + __attribute__ ((section (SEGGER_SYSVIEW_SECTION), zero_init)) static char _UpBuffer [SEGGER_SYSVIEW_RTT_BUFFER_SIZE]; + #if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) + __attribute__ ((section (SEGGER_SYSVIEW_SECTION), zero_init)) static char _DownBuffer[8]; // Small, fixed-size buffer, for back-channel comms + #endif + #else + static char _UpBuffer [SEGGER_SYSVIEW_RTT_BUFFER_SIZE]; + #if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) + static char _DownBuffer[8]; // Small, fixed-size buffer, for back-channel comms + #endif + #endif +#else + #if SEGGER_SYSVIEW_CPU_CACHE_LINE_SIZE + #if (defined __GNUC__) + static char _UpBuffer [SEGGER_SYSVIEW_RTT_BUFFER_SIZE] __attribute__ ((aligned (SEGGER_SYSVIEW_CPU_CACHE_LINE_SIZE))); + #if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) + static char _DownBuffer[8] __attribute__ ((aligned (SEGGER_SYSVIEW_CPU_CACHE_LINE_SIZE))); // Small, fixed-size buffer, for back-channel comms + #endif + #elif (defined(__ICCARM__)) + #pragma data_alignment=SEGGER_RTT_CPU_CACHE_LINE_SIZE + static char _UpBuffer [SEGGER_SYSVIEW_RTT_BUFFER_SIZE]; + #if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) + #pragma data_alignment=SEGGER_RTT_CPU_CACHE_LINE_SIZE + static char _DownBuffer[8]; // Small, fixed-size buffer, for back-channel comms + #endif + #else + #error "Don't know how to place _SEGGER_RTT, _acUpBuffer, _acDownBuffer cache-line aligned" + #endif + #else + static char _UpBuffer [SEGGER_SYSVIEW_RTT_BUFFER_SIZE]; + #if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) + static char _DownBuffer[8]; // Small, fixed-size buffer, for back-channel comms + #endif + #endif +#endif + +static SEGGER_SYSVIEW_GLOBALS _SYSVIEW_Globals; + +static SEGGER_SYSVIEW_MODULE* _pFirstModule; +static U8 _NumModules; + +/********************************************************************* +* +* Static code +* +********************************************************************** +*/ + +#define ENCODE_U32(pDest, Value) { \ + U8* pSysviewPointer; \ + U32 SysViewData; \ + pSysviewPointer = pDest; \ + SysViewData = Value; \ + while(SysViewData > 0x7F) { \ + *pSysviewPointer++ = (U8)(SysViewData | 0x80); \ + SysViewData >>= 7; \ + }; \ + *pSysviewPointer++ = (U8)SysViewData; \ + pDest = pSysviewPointer; \ + }; + + + +#if (SEGGER_SYSVIEW_USE_STATIC_BUFFER == 1) +static U8 _aPacket[SEGGER_SYSVIEW_MAX_PACKET_SIZE]; + +#define RECORD_START(PacketSize) SEGGER_SYSVIEW_LOCK(); \ + pPayloadStart = _PreparePacket(_aPacket); + +#define RECORD_END() SEGGER_SYSVIEW_UNLOCK() + +#else + +#define RECORD_START(PacketSize) U8 aPacket[(PacketSize)]; \ + pPayloadStart = _PreparePacket(aPacket); \ + +#define RECORD_END() + +#endif + +/********************************************************************* +* +* _EncodeData() +* +* Function description +* Encode a byte buffer in variable-length format. +* +* Parameters +* pPayload - Pointer to where string will be encoded. +* pSrc - Pointer to data buffer to be encoded. +* NumBytes - Number of bytes in the buffer to be encoded. +* +* Return value +* Pointer to the byte following the value, i.e. the first free +* byte in the payload and the next position to store payload +* content. +* +* Additional information +* The data is encoded as a count byte followed by the contents +* of the data buffer. +* Make sure NumBytes + 1 bytes are free for the payload. +*/ +static U8* _EncodeData(U8* pPayload, const char* pSrc, unsigned int NumBytes) { + unsigned int n; + // + n = 0; + *pPayload++ = NumBytes; + while (n < NumBytes) { + *pPayload++ = *pSrc++; + n++; + } + return pPayload; +} + +/********************************************************************* +* +* _EncodeStr() +* +* Function description +* Encode a string in variable-length format. +* +* Parameters +* pPayload - Pointer to where string will be encoded. +* pText - String to encode. +* Limit - Maximum number of characters to encode from string. +* +* Return value +* Pointer to the byte following the value, i.e. the first free +* byte in the payload and the next position to store payload +* content. +* +* Additional information +* The string is encoded as a count byte followed by the contents +* of the string. +* No more than 1 + Limit bytes will be encoded to the payload. +*/ +static U8 *_EncodeStr(U8 *pPayload, const char *pText, unsigned int Limit) { + unsigned int n; + unsigned int Len; + // + // Compute string len + // + Len = 0; + while(*(pText + Len) != 0) { + Len++; + } + if (Len > Limit) { + Len = Limit; + } + // + // Write Len + // + if (Len < 255) { + *pPayload++ = Len; + } else { + *pPayload++ = 255; + *pPayload++ = (Len & 255); + *pPayload++ = ((Len >> 8) & 255); + } + // + // copy string + // + n = 0; + while (n < Len) { + *pPayload++ = *pText++; + n++; + } + return pPayload; +} + +/********************************************************************* +* +* _PreparePacket() +* +* Function description +* Prepare a SystemView event packet header. +* +* Parameters +* pPacket - Pointer to start of packet to initialize. +* +* Return value +* Pointer to first byte of packet payload. +* +* Additional information +* The payload length and evnetId are not initialized. +* PreparePacket only reserves space for them and they are +* computed and filled in by the sending function. +*/ +static U8* _PreparePacket(U8* pPacket) { + return pPacket + 4; +} + +/********************************************************************* +* +* _HandleIncomingPacket() +* +* Function description +* Read an incoming command from the down channel and process it. +* +* Additional information +* This function is called each time after sending a packet. +* Processing incoming packets is done asynchronous. SystemView might +* already have sent event packets after the host has sent a command. +*/ +#if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) +static void _HandleIncomingPacket(void) { + U8 Cmd; + int Status; + // + Status = SEGGER_RTT_ReadNoLock(CHANNEL_ID_DOWN, &Cmd, 1); + if (Status > 0) { + switch (Cmd) { + case SEGGER_SYSVIEW_COMMAND_ID_START: + SEGGER_SYSVIEW_Start(); + break; + case SEGGER_SYSVIEW_COMMAND_ID_STOP: + SEGGER_SYSVIEW_Stop(); + break; + case SEGGER_SYSVIEW_COMMAND_ID_GET_SYSTIME: + SEGGER_SYSVIEW_RecordSystime(); + break; + case SEGGER_SYSVIEW_COMMAND_ID_GET_TASKLIST: + SEGGER_SYSVIEW_SendTaskList(); + break; + case SEGGER_SYSVIEW_COMMAND_ID_GET_SYSDESC: + SEGGER_SYSVIEW_GetSysDesc(); + break; + case SEGGER_SYSVIEW_COMMAND_ID_GET_NUMMODULES: + SEGGER_SYSVIEW_SendNumModules(); + break; + case SEGGER_SYSVIEW_COMMAND_ID_GET_MODULEDESC: + SEGGER_SYSVIEW_SendModuleDescription(); + break; + case SEGGER_SYSVIEW_COMMAND_ID_GET_MODULE: + Status = SEGGER_RTT_ReadNoLock(CHANNEL_ID_DOWN, &Cmd, 1); + if (Status > 0) { + SEGGER_SYSVIEW_SendModule(Cmd); + } + break; + case SEGGER_SYSVIEW_COMMAND_ID_HEARTBEAT: + break; + default: + if (Cmd >= 128) { // Unknown extended command. Dummy read its parameter. + SEGGER_RTT_ReadNoLock(CHANNEL_ID_DOWN, &Cmd, 1); + } + break; + } + } +} +#endif // (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) + +/********************************************************************* +* +* _TrySendOverflowPacket() +* +* Function description +* Try to transmit an SystemView Overflow packet containing the +* number of dropped packets. +* +* Additional information +* Format as follows: +* 01 Max. packet len is 1 + 5 + 5 = 11 +* +* Example packets sent +* 01 20 40 +* +* Return value +* !=0: Success, Message sent (stored in RTT-Buffer) +* ==0: Buffer full, Message *NOT* stored +* +*/ +#if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) +static int _TrySendOverflowPacket(void) { + U32 TimeStamp; + I32 Delta; + int Status; + U8 aPacket[11]; + U8* pPayload; + + aPacket[0] = SYSVIEW_EVTID_OVERFLOW; // 1 + pPayload = &aPacket[1]; + ENCODE_U32(pPayload, _SYSVIEW_Globals.DropCount); + // + // Compute time stamp delta and append it to packet. + // + TimeStamp = SEGGER_SYSVIEW_GET_TIMESTAMP(); + Delta = TimeStamp - _SYSVIEW_Globals.LastTxTimeStamp; + MAKE_DELTA_32BIT(Delta); + ENCODE_U32(pPayload, Delta); + // + // Try to store packet in RTT buffer and update time stamp when this was successful + // + Status = SEGGER_RTT_WriteSkipNoLock(CHANNEL_ID_UP, aPacket, pPayload - aPacket); + SEGGER_SYSVIEW_ON_EVENT_RECORDED(pPayload - aPacket); + if (Status) { + _SYSVIEW_Globals.LastTxTimeStamp = TimeStamp; + _SYSVIEW_Globals.EnableState--; // EnableState has been 2, will be 1. Always. + } else { + _SYSVIEW_Globals.DropCount++; + } + // + return Status; +} +#endif // (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) + +/********************************************************************* +* +* _SendSyncInfo() +* +* Function description +* Send SystemView sync packet and system information in +* post mortem mode. +* +* Additional information +* Sync is 10 * 0x00 without timestamp +*/ +#if (SEGGER_SYSVIEW_POST_MORTEM_MODE == 1) +static void _SendSyncInfo(void) { + // + // Add sync packet ( 10 * 0x00) + // Send system description + // Send system time + // Send task list + // Send module description + // Send module information + // + SEGGER_RTT_WriteWithOverwriteNoLock(CHANNEL_ID_UP, _abSync, 10); + SEGGER_SYSVIEW_ON_EVENT_RECORDED(10); + SEGGER_SYSVIEW_RecordVoid(SYSVIEW_EVTID_TRACE_START); + { + U8* pPayload; + U8* pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 4 * SEGGER_SYSVIEW_QUANTA_U32); + // + pPayload = pPayloadStart; + ENCODE_U32(pPayload, _SYSVIEW_Globals.SysFreq); + ENCODE_U32(pPayload, _SYSVIEW_Globals.CPUFreq); + ENCODE_U32(pPayload, _SYSVIEW_Globals.RAMBaseAddress); + ENCODE_U32(pPayload, SEGGER_SYSVIEW_ID_SHIFT); + _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_INIT); + RECORD_END(); + } + if (_SYSVIEW_Globals.pfSendSysDesc) { + _SYSVIEW_Globals.pfSendSysDesc(); + } + SEGGER_SYSVIEW_RecordSystime(); + SEGGER_SYSVIEW_SendTaskList(); + if (_NumModules > 0) { + int n; + SEGGER_SYSVIEW_SendNumModules(); + for (n = 0; n < _NumModules; n++) { + SEGGER_SYSVIEW_SendModule(n); + } + SEGGER_SYSVIEW_SendModuleDescription(); + } +} +#endif // (SEGGER_SYSVIEW_POST_MORTEM_MODE == 1) + +/********************************************************************* +* +* _SendPacket() +* +* Function description +* Send a SystemView packet over RTT. RTT channel and mode are +* configured by macros when the SystemView component is initialized. +* This function takes care of maintaining the packet drop count +* and sending overflow packets when necessary. +* The packet must be passed without Id and Length because this +* function prepends it to the packet before transmission. +* +* Parameters +* pStartPacket - Pointer to start of packet payload. +* There must be at least 4 bytes free to prepend Id and Length. +* pEndPacket - Pointer to end of packet payload. +* EventId - Id of the event to send. +* +*/ +static void _SendPacket(U8* pStartPacket, U8* pEndPacket, unsigned int EventId) { + unsigned int NumBytes; + U32 TimeStamp; + U32 Delta; +#if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) + int Status; +#endif + +#if (SEGGER_SYSVIEW_USE_STATIC_BUFFER == 0) + SEGGER_SYSVIEW_LOCK(); +#endif + +#if (SEGGER_SYSVIEW_POST_MORTEM_MODE == 1) + if (_SYSVIEW_Globals.EnableState == 0) { + goto SendDone; + } +#else + if (_SYSVIEW_Globals.EnableState == 1) { // Enabled, no dropped packets remaining + goto Send; + } + if (_SYSVIEW_Globals.EnableState == 0) { + goto SendDone; + } + // + // Handle buffer full situations: + // Have packets been dropped before because buffer was full? + // In this case try to send and overflow packet. + // + if (_SYSVIEW_Globals.EnableState == 2) { + _TrySendOverflowPacket(); + if (_SYSVIEW_Globals.EnableState != 1) { + goto SendDone; + } + } +Send: +#endif + // + // Check if event is disabled from being recorded. + // + if (EventId < 32) { + if (_SYSVIEW_Globals.DisabledEvents & ((U32)1u << EventId)) { + goto SendDone; + } + } + // + // Prepare actual packet. + // If it is a known packet, prepend eventId only, + // otherwise prepend packet length and eventId. + // + if (EventId < 24) { + *--pStartPacket = EventId; + } else { + NumBytes = pEndPacket - pStartPacket; + if (NumBytes > 127) { + *--pStartPacket = (NumBytes >> 7); + *--pStartPacket = NumBytes | 0x80; + } else { + *--pStartPacket = NumBytes; + } + if (EventId > 127) { + *--pStartPacket = (EventId >> 7); + *--pStartPacket = EventId | 0x80; + } else { + *--pStartPacket = EventId; + } + } + // + // Compute time stamp delta and append it to packet. + // + TimeStamp = SEGGER_SYSVIEW_GET_TIMESTAMP(); + Delta = TimeStamp - _SYSVIEW_Globals.LastTxTimeStamp; + MAKE_DELTA_32BIT(Delta); + ENCODE_U32(pEndPacket, Delta); +#if (SEGGER_SYSVIEW_POST_MORTEM_MODE == 1) + // + // Store packet in RTT buffer by overwriting old data and update time stamp + // + SEGGER_RTT_WriteWithOverwriteNoLock(CHANNEL_ID_UP, pStartPacket, pEndPacket - pStartPacket); + SEGGER_SYSVIEW_ON_EVENT_RECORDED(pEndPacket - pStartPacket); + _SYSVIEW_Globals.LastTxTimeStamp = TimeStamp; +#else + // + // Try to store packet in RTT buffer and update time stamp when this was successful + // + Status = SEGGER_RTT_WriteSkipNoLock(CHANNEL_ID_UP, pStartPacket, pEndPacket - pStartPacket); + SEGGER_SYSVIEW_ON_EVENT_RECORDED(pEndPacket - pStartPacket); + if (Status) { + _SYSVIEW_Globals.LastTxTimeStamp = TimeStamp; + } else { + _SYSVIEW_Globals.EnableState++; // EnableState has been 1, will be 2. Always. + } +#endif + +#if (SEGGER_SYSVIEW_POST_MORTEM_MODE == 1) + // + // Add sync and system information periodically if we are in post mortem mode + // + if (_SYSVIEW_Globals.RecursionCnt == 0) { // Avoid uncontrolled nesting. This way, this routine can call itself once, but no more often than that. + _SYSVIEW_Globals.RecursionCnt = 1; + if (_SYSVIEW_Globals.PacketCount++ & (1 << SEGGER_SYSVIEW_SYNC_PERIOD_SHIFT)) { + _SendSyncInfo(); + _SYSVIEW_Globals.PacketCount = 0; + } + _SYSVIEW_Globals.RecursionCnt = 0; + } +SendDone: + ; // Avoid "label at end of compound statement" error when using static buffer +#else +SendDone: + // + // Check if host is sending data which needs to be processed. + // Note that since this code is called for every packet, it is very time critical, so we do + // only what is really needed here, which is checking if there is any data + // + if (SEGGER_RTT_HASDATA(CHANNEL_ID_DOWN)) { + if (_SYSVIEW_Globals.RecursionCnt == 0) { // Avoid uncontrolled nesting. This way, this routine can call itself once, but no more often than that. + _SYSVIEW_Globals.RecursionCnt = 1; + _HandleIncomingPacket(); + _SYSVIEW_Globals.RecursionCnt = 0; + } + } +#endif + // +#if (SEGGER_SYSVIEW_USE_STATIC_BUFFER == 0) + SEGGER_SYSVIEW_UNLOCK(); // We are done. Unlock and return +#endif +} + +#ifndef SEGGER_SYSVIEW_EXCLUDE_PRINTF // Define in project to avoid warnings about variable parameter list +/********************************************************************* +* +* _VPrintHost() +* +* Function description +* Send a format string and its parameters to the host. +* +* Parameters +* s Pointer to format string. +* Options Options to be sent to the host. +* pParamList Pointer to the list of arguments for the format string. +*/ +static int _VPrintHost(const char* s, U32 Options, va_list* pParamList) { + U32 aParas[SEGGER_SYSVIEW_MAX_ARGUMENTS]; + U32* pParas; + U32 NumArguments; + const char* p; + char c; + U8* pPayload; + U8* pPayloadStart; +#if SEGGER_SYSVIEW_PRINTF_IMPLICIT_FORMAT + U8 HasNonScalar; + + HasNonScalar = 0; +#endif + // + // Count number of arguments by counting '%' characters in string. + // If enabled, check for non-scalar modifier flags to format string on the target. + // + p = s; + NumArguments = 0; + for (;;) { + c = *p++; + if (c == 0) { + break; + } + if (c == '%') { + c = *p; +#if SEGGER_SYSVIEW_PRINTF_IMPLICIT_FORMAT == 0 + aParas[NumArguments++] = va_arg(*pParamList, int); + if (NumArguments == SEGGER_SYSVIEW_MAX_ARGUMENTS) { + break; + } +#else + if (c == 's') { + HasNonScalar = 1; + break; + } else { + aParas[NumArguments++] = va_arg(*pParamList, int); + if (NumArguments == SEGGER_SYSVIEW_MAX_ARGUMENTS) { + break; + } + } +#endif + } + } + +#if SEGGER_SYSVIEW_PRINTF_IMPLICIT_FORMAT + if (HasNonScalar) { + return -1; + } +#endif + // + // Send string and parameters to host + // + { + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_MAX_STRING_LEN + 2 * SEGGER_SYSVIEW_QUANTA_U32 + SEGGER_SYSVIEW_MAX_ARGUMENTS * SEGGER_SYSVIEW_QUANTA_U32); + pPayload = _EncodeStr(pPayloadStart, s, SEGGER_SYSVIEW_MAX_STRING_LEN); + ENCODE_U32(pPayload, Options); + ENCODE_U32(pPayload, NumArguments); + pParas = aParas; + while (NumArguments--) { + ENCODE_U32(pPayload, (*pParas)); + pParas++; + } + _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_PRINT_FORMATTED); + RECORD_END(); + } + return 0; +} + +/********************************************************************* +* +* _StoreChar() +* +* Function description +* Stores a character in the printf-buffer and sends the buffer when +* it is filled. +* +* Parameters +* p Pointer to the buffer description. +* c Character to be printed. +*/ +static void _StoreChar(SEGGER_SYSVIEW_PRINTF_DESC * p, char c) { + unsigned int Cnt; + U8* pPayload; + U32 Options; + + Cnt = p->Cnt; + if ((Cnt + 1u) <= SEGGER_SYSVIEW_MAX_STRING_LEN) { + *(p->pPayload++) = c; + p->Cnt = Cnt + 1u; + } + // + // Write part of string, when the buffer is full + // + if (p->Cnt == SEGGER_SYSVIEW_MAX_STRING_LEN) { + *(p->pPayloadStart) = p->Cnt; + pPayload = p->pPayload; + Options = p->Options; + ENCODE_U32(pPayload, Options); + ENCODE_U32(pPayload, 0); + _SendPacket(p->pPayloadStart, pPayload, SYSVIEW_EVTID_PRINT_FORMATTED); + p->pPayloadStart = _PreparePacket(p->pBuffer); + p->pPayload = p->pPayloadStart + 1u; + p->Cnt = 0u; + } +} + +/********************************************************************* +* +* _PrintUnsigned() +* +* Function description +* Print an unsigned integer with the given formatting into the +* formatted string. +* +* Parameters +* pBufferDesc Pointer to the buffer description. +* v Value to be printed. +* Base Base of the value. +* NumDigits Number of digits to be printed. +* FieldWidth Width of the printed field. +* FormatFlags Flags for formatting the value. +*/ +static void _PrintUnsigned(SEGGER_SYSVIEW_PRINTF_DESC * pBufferDesc, unsigned int v, unsigned int Base, unsigned int NumDigits, unsigned int FieldWidth, unsigned int FormatFlags) { + static const char _aV2C[16] = {'0', '1', '2', '3', '4', '5', '6', '7', '8', '9', 'A', 'B', 'C', 'D', 'E', 'F' }; + unsigned int Div; + unsigned int Digit; + unsigned int Number; + unsigned int Width; + char c; + + Number = v; + Digit = 1u; + // + // Get actual field width + // + Width = 1u; + while (Number >= Base) { + Number = (Number / Base); + Width++; + } + if (NumDigits > Width) { + Width = NumDigits; + } + // + // Print leading chars if necessary + // + if ((FormatFlags & FORMAT_FLAG_LEFT_JUSTIFY) == 0u) { + if (FieldWidth != 0u) { + if (((FormatFlags & FORMAT_FLAG_PAD_ZERO) == FORMAT_FLAG_PAD_ZERO) && (NumDigits == 0u)) { + c = '0'; + } else { + c = ' '; + } + while ((FieldWidth != 0u) && (Width < FieldWidth)) { + FieldWidth--; + _StoreChar(pBufferDesc, c); + } + } + } + // + // Compute Digit. + // Loop until Digit has the value of the highest digit required. + // Example: If the output is 345 (Base 10), loop 2 times until Digit is 100. + // + while (1) { + if (NumDigits > 1u) { // User specified a min number of digits to print? => Make sure we loop at least that often, before checking anything else (> 1 check avoids problems with NumDigits being signed / unsigned) + NumDigits--; + } else { + Div = v / Digit; + if (Div < Base) { // Is our divider big enough to extract the highest digit from value? => Done + break; + } + } + Digit *= Base; + } + // + // Output digits + // + do { + Div = v / Digit; + v -= Div * Digit; + _StoreChar(pBufferDesc, _aV2C[Div]); + Digit /= Base; + } while (Digit); + // + // Print trailing spaces if necessary + // + if ((FormatFlags & FORMAT_FLAG_LEFT_JUSTIFY) == FORMAT_FLAG_LEFT_JUSTIFY) { + if (FieldWidth != 0u) { + while ((FieldWidth != 0u) && (Width < FieldWidth)) { + FieldWidth--; + _StoreChar(pBufferDesc, ' '); + } + } + } +} + +/********************************************************************* +* +* _PrintInt() +* +* Function description +* Print a signed integer with the given formatting into the +* formatted string. +* +* Parameters +* pBufferDesc Pointer to the buffer description. +* v Value to be printed. +* Base Base of the value. +* NumDigits Number of digits to be printed. +* FieldWidth Width of the printed field. +* FormatFlags Flags for formatting the value. +*/ +static void _PrintInt(SEGGER_SYSVIEW_PRINTF_DESC * pBufferDesc, int v, unsigned int Base, unsigned int NumDigits, unsigned int FieldWidth, unsigned int FormatFlags) { + unsigned int Width; + int Number; + + Number = (v < 0) ? -v : v; + + // + // Get actual field width + // + Width = 1u; + while (Number >= (int)Base) { + Number = (Number / (int)Base); + Width++; + } + if (NumDigits > Width) { + Width = NumDigits; + } + if ((FieldWidth > 0u) && ((v < 0) || ((FormatFlags & FORMAT_FLAG_PRINT_SIGN) == FORMAT_FLAG_PRINT_SIGN))) { + FieldWidth--; + } + + // + // Print leading spaces if necessary + // + if ((((FormatFlags & FORMAT_FLAG_PAD_ZERO) == 0u) || (NumDigits != 0u)) && ((FormatFlags & FORMAT_FLAG_LEFT_JUSTIFY) == 0u)) { + if (FieldWidth != 0u) { + while ((FieldWidth != 0u) && (Width < FieldWidth)) { + FieldWidth--; + _StoreChar(pBufferDesc, ' '); + } + } + } + // + // Print sign if necessary + // + if (v < 0) { + v = -v; + _StoreChar(pBufferDesc, '-'); + } else if ((FormatFlags & FORMAT_FLAG_PRINT_SIGN) == FORMAT_FLAG_PRINT_SIGN) { + _StoreChar(pBufferDesc, '+'); + } else { + + } + // + // Print leading zeros if necessary + // + if (((FormatFlags & FORMAT_FLAG_PAD_ZERO) == FORMAT_FLAG_PAD_ZERO) && ((FormatFlags & FORMAT_FLAG_LEFT_JUSTIFY) == 0u) && (NumDigits == 0u)) { + if (FieldWidth != 0u) { + while ((FieldWidth != 0u) && (Width < FieldWidth)) { + FieldWidth--; + _StoreChar(pBufferDesc, '0'); + } + } + } + // + // Print number without sign + // + _PrintUnsigned(pBufferDesc, (unsigned int)v, Base, NumDigits, FieldWidth, FormatFlags); +} + +/********************************************************************* +* +* _VPrintTarget() +* +* Function description +* Stores a formatted string. +* This data is read by the host. +* +* Parameters +* sFormat Pointer to format string. +* Options Options to be sent to the host. +* pParamList Pointer to the list of arguments for the format string. +*/ +static void _VPrintTarget(const char* sFormat, U32 Options, va_list* pParamList) { + SEGGER_SYSVIEW_PRINTF_DESC BufferDesc; + char c; + int v; + unsigned int NumDigits; + unsigned int FormatFlags; + unsigned int FieldWidth; + U8* pPayloadStart; +#if SEGGER_SYSVIEW_USE_STATIC_BUFFER == 0 + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_MAX_STRING_LEN + 1 + 2 * SEGGER_SYSVIEW_QUANTA_U32); + SEGGER_SYSVIEW_LOCK(); +#else + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_MAX_STRING_LEN + 1 + 2 * SEGGER_SYSVIEW_QUANTA_U32); +#endif + +#if SEGGER_SYSVIEW_USE_STATIC_BUFFER == 0 + BufferDesc.pBuffer = aPacket; +#else + BufferDesc.pBuffer = _aPacket; +#endif + BufferDesc.Cnt = 0u; + BufferDesc.pPayloadStart = pPayloadStart; + BufferDesc.pPayload = BufferDesc.pPayloadStart + 1u; + BufferDesc.Options = Options; + + do { + c = *sFormat; + sFormat++; + if (c == 0u) { + break; + } + if (c == '%') { + // + // Filter out flags + // + FormatFlags = 0u; + v = 1; + do { + c = *sFormat; + switch (c) { + case '-': FormatFlags |= FORMAT_FLAG_LEFT_JUSTIFY; sFormat++; break; + case '0': FormatFlags |= FORMAT_FLAG_PAD_ZERO; sFormat++; break; + case '+': FormatFlags |= FORMAT_FLAG_PRINT_SIGN; sFormat++; break; + case '#': FormatFlags |= FORMAT_FLAG_ALTERNATE; sFormat++; break; + default: v = 0; break; + } + } while (v); + // + // filter out field with + // + FieldWidth = 0u; + do { + c = *sFormat; + if ((c < '0') || (c > '9')) { + break; + } + sFormat++; + FieldWidth = (FieldWidth * 10u) + ((unsigned int)c - '0'); + } while (1); + + // + // Filter out precision (number of digits to display) + // + NumDigits = 0u; + c = *sFormat; + if (c == '.') { + sFormat++; + do { + c = *sFormat; + if ((c < '0') || (c > '9')) { + break; + } + sFormat++; + NumDigits = NumDigits * 10u + ((unsigned int)c - '0'); + } while (1); + } + // + // Filter out length modifier + // + c = *sFormat; + do { + if ((c == 'l') || (c == 'h')) { + c = *sFormat; + sFormat++; + } else { + break; + } + } while (1); + // + // Handle specifiers + // + switch (c) { + case 'c': { + char c0; + v = va_arg(*pParamList, int); + c0 = (char)v; + _StoreChar(&BufferDesc, c0); + break; + } + case 'd': + v = va_arg(*pParamList, int); + _PrintInt(&BufferDesc, v, 10u, NumDigits, FieldWidth, FormatFlags); + break; + case 'u': + v = va_arg(*pParamList, int); + _PrintUnsigned(&BufferDesc, (unsigned int)v, 10u, NumDigits, FieldWidth, FormatFlags); + break; + case 'x': + case 'X': + v = va_arg(*pParamList, int); + _PrintUnsigned(&BufferDesc, (unsigned int)v, 16u, NumDigits, FieldWidth, FormatFlags); + break; + case 'p': + v = va_arg(*pParamList, int); + _PrintUnsigned(&BufferDesc, (unsigned int)v, 16u, 8u, 8u, 0u); + break; + case '%': + _StoreChar(&BufferDesc, '%'); + break; + default: + break; + } + sFormat++; + } else { + _StoreChar(&BufferDesc, c); + } + } while (*sFormat); + + // + // Write remaining data, if any + // + if (BufferDesc.Cnt != 0u) { + *(BufferDesc.pPayloadStart) = BufferDesc.Cnt; + ENCODE_U32(BufferDesc.pPayload, BufferDesc.Options); + ENCODE_U32(BufferDesc.pPayload, 0); + _SendPacket(BufferDesc.pPayloadStart, BufferDesc.pPayload, SYSVIEW_EVTID_PRINT_FORMATTED); + } +#if SEGGER_SYSVIEW_USE_STATIC_BUFFER == 0 + SEGGER_SYSVIEW_UNLOCK(); + RECORD_END(); +#else + RECORD_END(); +#endif +} +#endif // SEGGER_SYSVIEW_EXCLUDE_PRINTF + +/********************************************************************* +* +* Public code +* +********************************************************************** +*/ + +/********************************************************************* +* +* SEGGER_SYSVIEW_Init() +* +* Function description +* Initializes the SYSVIEW module. +* Must be called before the Systemview Application connects to +* the system. +* +* Parameters +* SysFreq - Frequency of timestamp, usually CPU core clock frequency. +* CPUFreq - CPU core clock frequency. +* pOSAPI - Pointer to the API structure for OS-specific functions. +* pfSendSysDesc - Pointer to record system description callback function. +* +* Additional information +* This function initializes the RTT channel used to transport +* SEGGER SystemView packets. +* The channel is assigned the label "SysView" for client software +* to identify the SystemView channel. +* +* The channel is configured with the macro SEGGER_SYSVIEW_RTT_CHANNEL. +*/ +void SEGGER_SYSVIEW_Init(U32 SysFreq, U32 CPUFreq, const SEGGER_SYSVIEW_OS_API *pOSAPI, SEGGER_SYSVIEW_SEND_SYS_DESC_FUNC pfSendSysDesc) { +#ifdef SEGGER_RTT_SECTION + // + // Explicitly initialize the RTT Control Block if it is in its dedicated section. + // + SEGGER_RTT_Init(); +#endif +#if (SEGGER_SYSVIEW_POST_MORTEM_MODE == 1) +#if SEGGER_SYSVIEW_RTT_CHANNEL > 0 + SEGGER_RTT_ConfigUpBuffer(SEGGER_SYSVIEW_RTT_CHANNEL, "SysView", &_UpBuffer[0], sizeof(_UpBuffer), SEGGER_RTT_MODE_NO_BLOCK_SKIP); +#else + _SYSVIEW_Globals.UpChannel = SEGGER_RTT_AllocUpBuffer ("SysView", &_UpBuffer[0], sizeof(_UpBuffer), SEGGER_RTT_MODE_NO_BLOCK_SKIP); +#endif + _SYSVIEW_Globals.RAMBaseAddress = SEGGER_SYSVIEW_ID_BASE; + _SYSVIEW_Globals.LastTxTimeStamp = SEGGER_SYSVIEW_GET_TIMESTAMP(); + _SYSVIEW_Globals.pOSAPI = pOSAPI; + _SYSVIEW_Globals.SysFreq = SysFreq; + _SYSVIEW_Globals.CPUFreq = CPUFreq; + _SYSVIEW_Globals.pfSendSysDesc = pfSendSysDesc; + _SYSVIEW_Globals.EnableState = 0; + _SYSVIEW_Globals.PacketCount = 0; +#else // (SEGGER_SYSVIEW_POST_MORTEM_MODE == 1) +#if SEGGER_SYSVIEW_RTT_CHANNEL > 0 + SEGGER_RTT_ConfigUpBuffer (SEGGER_SYSVIEW_RTT_CHANNEL, "SysView", &_UpBuffer[0], sizeof(_UpBuffer), SEGGER_RTT_MODE_NO_BLOCK_SKIP); + SEGGER_RTT_ConfigDownBuffer (SEGGER_SYSVIEW_RTT_CHANNEL, "SysView", &_DownBuffer[0], sizeof(_DownBuffer), SEGGER_RTT_MODE_NO_BLOCK_SKIP); +#else + _SYSVIEW_Globals.UpChannel = SEGGER_RTT_AllocUpBuffer ("SysView", &_UpBuffer[0], sizeof(_UpBuffer), SEGGER_RTT_MODE_NO_BLOCK_SKIP); + _SYSVIEW_Globals.DownChannel = _SYSVIEW_Globals.UpChannel; + SEGGER_RTT_ConfigDownBuffer (_SYSVIEW_Globals.DownChannel, "SysView", &_DownBuffer[0], sizeof(_DownBuffer), SEGGER_RTT_MODE_NO_BLOCK_SKIP); +#endif + _SYSVIEW_Globals.RAMBaseAddress = SEGGER_SYSVIEW_ID_BASE; + _SYSVIEW_Globals.LastTxTimeStamp = SEGGER_SYSVIEW_GET_TIMESTAMP(); + _SYSVIEW_Globals.pOSAPI = pOSAPI; + _SYSVIEW_Globals.SysFreq = SysFreq; + _SYSVIEW_Globals.CPUFreq = CPUFreq; + _SYSVIEW_Globals.pfSendSysDesc = pfSendSysDesc; + _SYSVIEW_Globals.EnableState = 0; +#endif // (SEGGER_SYSVIEW_POST_MORTEM_MODE == 1) +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_SetRAMBase() +* +* Function description +* Sets the RAM base address, which is subtracted from IDs in order +* to save bandwidth. +* +* Parameters +* RAMBaseAddress - Lowest RAM Address. (i.e. 0x20000000 on most Cortex-M) +*/ +void SEGGER_SYSVIEW_SetRAMBase(U32 RAMBaseAddress) { + _SYSVIEW_Globals.RAMBaseAddress = RAMBaseAddress; +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_RecordVoid() +* +* Function description +* Formats and sends a SystemView packet with an empty payload. +* +* Parameters +* EventID - SystemView event ID. +*/ +void SEGGER_SYSVIEW_RecordVoid(unsigned int EventID) { + U8* pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE); + // + _SendPacket(pPayloadStart, pPayloadStart, EventID); + RECORD_END(); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_RecordU32() +* +* Function description +* Formats and sends a SystemView packet containing a single U32 +* parameter payload. +* +* Parameters +* EventID - SystemView event ID. +* Value - The 32-bit parameter encoded to SystemView packet payload. +*/ +void SEGGER_SYSVIEW_RecordU32(unsigned int EventID, U32 Value) { + U8* pPayload; + U8* pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_QUANTA_U32); + // + pPayload = pPayloadStart; + ENCODE_U32(pPayload, Value); + _SendPacket(pPayloadStart, pPayload, EventID); + RECORD_END(); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_RecordU32x2() +* +* Function description +* Formats and sends a SystemView packet containing 2 U32 parameter payload. +* +* Parameters +* EventID - SystemView event ID. +* Para0 - The 32-bit parameter encoded to SystemView packet payload. +* Para1 - The 32-bit parameter encoded to SystemView packet payload. +*/ +void SEGGER_SYSVIEW_RecordU32x2(unsigned int EventID, U32 Para0, U32 Para1) { + U8* pPayload; + U8* pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 2 * SEGGER_SYSVIEW_QUANTA_U32); + // + pPayload = pPayloadStart; + ENCODE_U32(pPayload, Para0); + ENCODE_U32(pPayload, Para1); + _SendPacket(pPayloadStart, pPayload, EventID); + RECORD_END(); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_RecordU32x3() +* +* Function description +* Formats and sends a SystemView packet containing 3 U32 parameter payload. +* +* Parameters +* EventID - SystemView event ID. +* Para0 - The 32-bit parameter encoded to SystemView packet payload. +* Para1 - The 32-bit parameter encoded to SystemView packet payload. +* Para2 - The 32-bit parameter encoded to SystemView packet payload. +*/ +void SEGGER_SYSVIEW_RecordU32x3(unsigned int EventID, U32 Para0, U32 Para1, U32 Para2) { + U8* pPayload; + U8* pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 3 * SEGGER_SYSVIEW_QUANTA_U32); + // + pPayload = pPayloadStart; + ENCODE_U32(pPayload, Para0); + ENCODE_U32(pPayload, Para1); + ENCODE_U32(pPayload, Para2); + _SendPacket(pPayloadStart, pPayload, EventID); + RECORD_END(); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_RecordU32x4() +* +* Function description +* Formats and sends a SystemView packet containing 4 U32 parameter payload. +* +* Parameters +* EventID - SystemView event ID. +* Para0 - The 32-bit parameter encoded to SystemView packet payload. +* Para1 - The 32-bit parameter encoded to SystemView packet payload. +* Para2 - The 32-bit parameter encoded to SystemView packet payload. +* Para3 - The 32-bit parameter encoded to SystemView packet payload. +*/ +void SEGGER_SYSVIEW_RecordU32x4(unsigned int EventID, U32 Para0, U32 Para1, U32 Para2, U32 Para3) { + U8* pPayload; + U8* pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 4 * SEGGER_SYSVIEW_QUANTA_U32); + // + pPayload = pPayloadStart; + ENCODE_U32(pPayload, Para0); + ENCODE_U32(pPayload, Para1); + ENCODE_U32(pPayload, Para2); + ENCODE_U32(pPayload, Para3); + _SendPacket(pPayloadStart, pPayload, EventID); + RECORD_END(); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_RecordU32x5() +* +* Function description +* Formats and sends a SystemView packet containing 5 U32 parameter payload. +* +* Parameters +* EventID - SystemView event ID. +* Para0 - The 32-bit parameter encoded to SystemView packet payload. +* Para1 - The 32-bit parameter encoded to SystemView packet payload. +* Para2 - The 32-bit parameter encoded to SystemView packet payload. +* Para3 - The 32-bit parameter encoded to SystemView packet payload. +* Para4 - The 32-bit parameter encoded to SystemView packet payload. +*/ +void SEGGER_SYSVIEW_RecordU32x5(unsigned int EventID, U32 Para0, U32 Para1, U32 Para2, U32 Para3, U32 Para4) { + U8* pPayload; + U8* pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 5 * SEGGER_SYSVIEW_QUANTA_U32); + // + pPayload = pPayloadStart; + ENCODE_U32(pPayload, Para0); + ENCODE_U32(pPayload, Para1); + ENCODE_U32(pPayload, Para2); + ENCODE_U32(pPayload, Para3); + ENCODE_U32(pPayload, Para4); + _SendPacket(pPayloadStart, pPayload, EventID); + RECORD_END(); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_RecordU32x6() +* +* Function description +* Formats and sends a SystemView packet containing 6 U32 parameter payload. +* +* Parameters +* EventID - SystemView event ID. +* Para0 - The 32-bit parameter encoded to SystemView packet payload. +* Para1 - The 32-bit parameter encoded to SystemView packet payload. +* Para2 - The 32-bit parameter encoded to SystemView packet payload. +* Para3 - The 32-bit parameter encoded to SystemView packet payload. +* Para4 - The 32-bit parameter encoded to SystemView packet payload. +* Para5 - The 32-bit parameter encoded to SystemView packet payload. +*/ +void SEGGER_SYSVIEW_RecordU32x6(unsigned int EventID, U32 Para0, U32 Para1, U32 Para2, U32 Para3, U32 Para4, U32 Para5) { + U8* pPayload; + U8* pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 6 * SEGGER_SYSVIEW_QUANTA_U32); + // + pPayload = pPayloadStart; + ENCODE_U32(pPayload, Para0); + ENCODE_U32(pPayload, Para1); + ENCODE_U32(pPayload, Para2); + ENCODE_U32(pPayload, Para3); + ENCODE_U32(pPayload, Para4); + ENCODE_U32(pPayload, Para5); + _SendPacket(pPayloadStart, pPayload, EventID); + RECORD_END(); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_RecordU32x7() +* +* Function description +* Formats and sends a SystemView packet containing 7 U32 parameter payload. +* +* Parameters +* EventID - SystemView event ID. +* Para0 - The 32-bit parameter encoded to SystemView packet payload. +* Para1 - The 32-bit parameter encoded to SystemView packet payload. +* Para2 - The 32-bit parameter encoded to SystemView packet payload. +* Para3 - The 32-bit parameter encoded to SystemView packet payload. +* Para4 - The 32-bit parameter encoded to SystemView packet payload. +* Para5 - The 32-bit parameter encoded to SystemView packet payload. +* Para6 - The 32-bit parameter encoded to SystemView packet payload. +*/ +void SEGGER_SYSVIEW_RecordU32x7(unsigned int EventID, U32 Para0, U32 Para1, U32 Para2, U32 Para3, U32 Para4, U32 Para5, U32 Para6) { + U8* pPayload; + U8* pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 7 * SEGGER_SYSVIEW_QUANTA_U32); + // + pPayload = pPayloadStart; + ENCODE_U32(pPayload, Para0); + ENCODE_U32(pPayload, Para1); + ENCODE_U32(pPayload, Para2); + ENCODE_U32(pPayload, Para3); + ENCODE_U32(pPayload, Para4); + ENCODE_U32(pPayload, Para5); + ENCODE_U32(pPayload, Para6); + _SendPacket(pPayloadStart, pPayload, EventID); + RECORD_END(); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_RecordU32x8() +* +* Function description +* Formats and sends a SystemView packet containing 8 U32 parameter payload. +* +* Parameters +* EventID - SystemView event ID. +* Para0 - The 32-bit parameter encoded to SystemView packet payload. +* Para1 - The 32-bit parameter encoded to SystemView packet payload. +* Para2 - The 32-bit parameter encoded to SystemView packet payload. +* Para3 - The 32-bit parameter encoded to SystemView packet payload. +* Para4 - The 32-bit parameter encoded to SystemView packet payload. +* Para5 - The 32-bit parameter encoded to SystemView packet payload. +* Para6 - The 32-bit parameter encoded to SystemView packet payload. +* Para7 - The 32-bit parameter encoded to SystemView packet payload. +*/ +void SEGGER_SYSVIEW_RecordU32x8(unsigned int EventID, U32 Para0, U32 Para1, U32 Para2, U32 Para3, U32 Para4, U32 Para5, U32 Para6, U32 Para7) { + U8* pPayload; + U8* pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 8 * SEGGER_SYSVIEW_QUANTA_U32); + // + pPayload = pPayloadStart; + ENCODE_U32(pPayload, Para0); + ENCODE_U32(pPayload, Para1); + ENCODE_U32(pPayload, Para2); + ENCODE_U32(pPayload, Para3); + ENCODE_U32(pPayload, Para4); + ENCODE_U32(pPayload, Para5); + ENCODE_U32(pPayload, Para6); + ENCODE_U32(pPayload, Para7); + _SendPacket(pPayloadStart, pPayload, EventID); + RECORD_END(); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_RecordU32x9() +* +* Function description +* Formats and sends a SystemView packet containing 9 U32 parameter payload. +* +* Parameters +* EventID - SystemView event ID. +* Para0 - The 32-bit parameter encoded to SystemView packet payload. +* Para1 - The 32-bit parameter encoded to SystemView packet payload. +* Para2 - The 32-bit parameter encoded to SystemView packet payload. +* Para3 - The 32-bit parameter encoded to SystemView packet payload. +* Para4 - The 32-bit parameter encoded to SystemView packet payload. +* Para5 - The 32-bit parameter encoded to SystemView packet payload. +* Para6 - The 32-bit parameter encoded to SystemView packet payload. +* Para7 - The 32-bit parameter encoded to SystemView packet payload. +* Para8 - The 32-bit parameter encoded to SystemView packet payload. +*/ +void SEGGER_SYSVIEW_RecordU32x9(unsigned int EventID, U32 Para0, U32 Para1, U32 Para2, U32 Para3, U32 Para4, U32 Para5, U32 Para6, U32 Para7, U32 Para8) { + U8* pPayload; + U8* pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 9 * SEGGER_SYSVIEW_QUANTA_U32); + // + pPayload = pPayloadStart; + ENCODE_U32(pPayload, Para0); + ENCODE_U32(pPayload, Para1); + ENCODE_U32(pPayload, Para2); + ENCODE_U32(pPayload, Para3); + ENCODE_U32(pPayload, Para4); + ENCODE_U32(pPayload, Para5); + ENCODE_U32(pPayload, Para6); + ENCODE_U32(pPayload, Para7); + ENCODE_U32(pPayload, Para8); + _SendPacket(pPayloadStart, pPayload, EventID); + RECORD_END(); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_RecordU32x10() +* +* Function description +* Formats and sends a SystemView packet containing 10 U32 parameter payload. +* +* Parameters +* EventID - SystemView event ID. +* Para0 - The 32-bit parameter encoded to SystemView packet payload. +* Para1 - The 32-bit parameter encoded to SystemView packet payload. +* Para2 - The 32-bit parameter encoded to SystemView packet payload. +* Para3 - The 32-bit parameter encoded to SystemView packet payload. +* Para4 - The 32-bit parameter encoded to SystemView packet payload. +* Para5 - The 32-bit parameter encoded to SystemView packet payload. +* Para6 - The 32-bit parameter encoded to SystemView packet payload. +* Para7 - The 32-bit parameter encoded to SystemView packet payload. +* Para8 - The 32-bit parameter encoded to SystemView packet payload. +* Para9 - The 32-bit parameter encoded to SystemView packet payload. +*/ +void SEGGER_SYSVIEW_RecordU32x10(unsigned int EventID, U32 Para0, U32 Para1, U32 Para2, U32 Para3, U32 Para4, U32 Para5, U32 Para6, U32 Para7, U32 Para8, U32 Para9) { + U8* pPayload; + U8* pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 10 * SEGGER_SYSVIEW_QUANTA_U32); + // + pPayload = pPayloadStart; + ENCODE_U32(pPayload, Para0); + ENCODE_U32(pPayload, Para1); + ENCODE_U32(pPayload, Para2); + ENCODE_U32(pPayload, Para3); + ENCODE_U32(pPayload, Para4); + ENCODE_U32(pPayload, Para5); + ENCODE_U32(pPayload, Para6); + ENCODE_U32(pPayload, Para7); + ENCODE_U32(pPayload, Para8); + ENCODE_U32(pPayload, Para9); + _SendPacket(pPayloadStart, pPayload, EventID); + RECORD_END(); +} +/********************************************************************* +* +* SEGGER_SYSVIEW_RecordString() +* +* Function description +* Formats and sends a SystemView packet containing a string. +* +* Parameters +* EventID - SystemView event ID. +* pString - The string to be sent in the SystemView packet payload. +* +* Additional information +* The string is encoded as a count byte followed by the contents +* of the string. +* No more than SEGGER_SYSVIEW_MAX_STRING_LEN bytes will be encoded to the payload. +*/ +void SEGGER_SYSVIEW_RecordString(unsigned int EventID, const char* pString) { + U8* pPayload; + U8* pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 1 + SEGGER_SYSVIEW_MAX_STRING_LEN); + // + pPayload = _EncodeStr(pPayloadStart, pString, SEGGER_SYSVIEW_MAX_STRING_LEN); + _SendPacket(pPayloadStart, pPayload, EventID); + RECORD_END(); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_Start() +* +* Function description +* Start recording SystemView events. +* +* This function is triggered by the SystemView Application on connect. +* For single-shot or post-mortem mode recording, it needs to be called +* by the application. +* +* Additional information +* This function enables transmission of SystemView packets recorded +* by subsequent trace calls and records a SystemView Start event. +* +* As part of start, a SystemView Init packet is sent, containing the system +* frequency. The list of current tasks, the current system time and the +* system description string is sent, too. +* +* Notes +* SEGGER_SYSVIEW_Start and SEGGER_SYSVIEW_Stop do not nest. +* When SEGGER_SYSVIEW_CAN_RESTART is 1, each received start command +* records the system information. This is required to enable restart +* of recordings when SystemView unexpectedly disconnects without sending +* a stop command before. +*/ +void SEGGER_SYSVIEW_Start(void) { +#if (SEGGER_SYSVIEW_CAN_RESTART == 0) + if (_SYSVIEW_Globals.EnableState == 0) { +#endif + _SYSVIEW_Globals.EnableState = 1; +#if (SEGGER_SYSVIEW_POST_MORTEM_MODE == 1) + _SendSyncInfo(); +#else + SEGGER_SYSVIEW_LOCK(); + SEGGER_RTT_WriteSkipNoLock(CHANNEL_ID_UP, _abSync, 10); + SEGGER_SYSVIEW_UNLOCK(); + SEGGER_SYSVIEW_ON_EVENT_RECORDED(10); + SEGGER_SYSVIEW_RecordVoid(SYSVIEW_EVTID_TRACE_START); + { + U8* pPayload; + U8* pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 4 * SEGGER_SYSVIEW_QUANTA_U32); + // + pPayload = pPayloadStart; + ENCODE_U32(pPayload, _SYSVIEW_Globals.SysFreq); + ENCODE_U32(pPayload, _SYSVIEW_Globals.CPUFreq); + ENCODE_U32(pPayload, _SYSVIEW_Globals.RAMBaseAddress); + ENCODE_U32(pPayload, SEGGER_SYSVIEW_ID_SHIFT); + _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_INIT); + RECORD_END(); + } + if (_SYSVIEW_Globals.pfSendSysDesc) { + _SYSVIEW_Globals.pfSendSysDesc(); + } + SEGGER_SYSVIEW_RecordSystime(); + SEGGER_SYSVIEW_SendTaskList(); + SEGGER_SYSVIEW_SendNumModules(); +#endif +#if (SEGGER_SYSVIEW_CAN_RESTART == 0) + } +#endif +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_Stop() +* +* Function description +* Stop recording SystemView events. +* +* This function is triggered by the SystemView Application on disconnect. +* For single-shot or post-mortem mode recording, it can be called +* by the application. +* +* Additional information +* This function disables transmission of SystemView packets recorded +* by subsequent trace calls. If transmission is enabled when +* this function is called, a single SystemView Stop event is recorded +* to the trace, send, and then trace transmission is halted. +*/ +void SEGGER_SYSVIEW_Stop(void) { + U8* pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE); + // + if (_SYSVIEW_Globals.EnableState) { + _SendPacket(pPayloadStart, pPayloadStart, SYSVIEW_EVTID_TRACE_STOP); + _SYSVIEW_Globals.EnableState = 0; + } + RECORD_END(); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_GetChannelID() +* +* Function description +* Returns the RTT / channel ID used by SystemView. +*/ +int SEGGER_SYSVIEW_GetChannelID(void) { + return CHANNEL_ID_UP; +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_GetSysDesc() +* +* Function description +* Triggers a send of the system information and description. +* +*/ +void SEGGER_SYSVIEW_GetSysDesc(void) { + U8* pPayload; + U8* pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 4 * SEGGER_SYSVIEW_QUANTA_U32); + // + pPayload = pPayloadStart; + ENCODE_U32(pPayload, _SYSVIEW_Globals.SysFreq); + ENCODE_U32(pPayload, _SYSVIEW_Globals.CPUFreq); + ENCODE_U32(pPayload, _SYSVIEW_Globals.RAMBaseAddress); + ENCODE_U32(pPayload, SEGGER_SYSVIEW_ID_SHIFT); + _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_INIT); + RECORD_END(); + if (_SYSVIEW_Globals.pfSendSysDesc) { + _SYSVIEW_Globals.pfSendSysDesc(); + } +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_SendTaskInfo() +* +* Function description +* Send a Task Info Packet, containing TaskId for identification, +* task priority and task name. +* +* Parameters +* pInfo - Pointer to task information to send. +*/ +void SEGGER_SYSVIEW_SendTaskInfo(const SEGGER_SYSVIEW_TASKINFO *pInfo) { + U8* pPayload; + U8* pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_QUANTA_U32 + 1 + 32); + // + pPayload = pPayloadStart; + ENCODE_U32(pPayload, SHRINK_ID(pInfo->TaskID)); + ENCODE_U32(pPayload, pInfo->Prio); + pPayload = _EncodeStr(pPayload, pInfo->sName, 32); + _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_TASK_INFO); + // + pPayload = pPayloadStart; + ENCODE_U32(pPayload, SHRINK_ID(pInfo->TaskID)); + ENCODE_U32(pPayload, pInfo->StackBase); + ENCODE_U32(pPayload, pInfo->StackSize); + ENCODE_U32(pPayload, 0); // Stack End, future use + _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_STACK_INFO); + RECORD_END(); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_SendTaskList() +* +* Function description +* Send all tasks descriptors to the host. +*/ +void SEGGER_SYSVIEW_SendTaskList(void) { + if (_SYSVIEW_Globals.pOSAPI && _SYSVIEW_Globals.pOSAPI->pfSendTaskList) { + _SYSVIEW_Globals.pOSAPI->pfSendTaskList(); + } +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_SendSysDesc() +* +* Function description +* Send the system description string to the host. +* The system description is used by the Systemview Application +* to identify the current application and handle events accordingly. +* +* The system description is usually called by the system description +* callback, to ensure it is only sent when the SystemView Application +* is connected. +* +* Parameters +* sSysDesc - Pointer to the 0-terminated system description string. +* +* Additional information +* One system description string may not exceed SEGGER_SYSVIEW_MAX_STRING_LEN characters. +* Multiple description strings can be recorded. +* +* The Following items can be described in a system description string. +* Each item is identified by its identifier, followed by '=' and the value. +* Items are separated by ','. +*/ +void SEGGER_SYSVIEW_SendSysDesc(const char *sSysDesc) { + U8* pPayload; + U8* pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 1 + SEGGER_SYSVIEW_MAX_STRING_LEN); + // + pPayload = _EncodeStr(pPayloadStart, sSysDesc, SEGGER_SYSVIEW_MAX_STRING_LEN); + _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_SYSDESC); + RECORD_END(); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_RecordSystime() +* +* Function description +* Formats and sends a SystemView Systime containing a single U64 or U32 +* parameter payload. +*/ +void SEGGER_SYSVIEW_RecordSystime(void) { + U64 Systime; + + if (_SYSVIEW_Globals.pOSAPI && _SYSVIEW_Globals.pOSAPI->pfGetTime) { + Systime = _SYSVIEW_Globals.pOSAPI->pfGetTime(); + SEGGER_SYSVIEW_RecordU32x2(SYSVIEW_EVTID_SYSTIME_US, + (U32)(Systime), + (U32)(Systime >> 32)); + } else { + SEGGER_SYSVIEW_RecordU32(SYSVIEW_EVTID_SYSTIME_CYCLES, SEGGER_SYSVIEW_GET_TIMESTAMP()); + } +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_RecordEnterISR() +* +* Function description +* Format and send an ISR entry event. +* +* Additional information +* Example packets sent +* 02 0F 50 // ISR(15) Enter. Timestamp is 80 (0x50) +*/ +void SEGGER_SYSVIEW_RecordEnterISR(void) { + unsigned v; + U8* pPayload; + U8* pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_QUANTA_U32); + // + pPayload = pPayloadStart; + v = SEGGER_SYSVIEW_GET_INTERRUPT_ID(); + ENCODE_U32(pPayload, v); + _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_ISR_ENTER); + RECORD_END(); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_RecordExitISR() +* +* Function description +* Format and send an ISR exit event. +* +* Additional information +* Format as follows: +* 03 // Max. packet len is 6 +* +* Example packets sent +* 03 20 // ISR Exit. Timestamp is 32 (0x20) +*/ +void SEGGER_SYSVIEW_RecordExitISR(void) { + U8* pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE); + // + _SendPacket(pPayloadStart, pPayloadStart, SYSVIEW_EVTID_ISR_EXIT); + RECORD_END(); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_RecordExitISRToScheduler() +* +* Function description +* Format and send an ISR exit into scheduler event. +* +* Additional information +* Format as follows: +* 18 // Max. packet len is 6 +* +* Example packets sent +* 18 20 // ISR Exit to Scheduler. Timestamp is 32 (0x20) +*/ +void SEGGER_SYSVIEW_RecordExitISRToScheduler(void) { + U8* pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE); + // + _SendPacket(pPayloadStart, pPayloadStart, SYSVIEW_EVTID_ISR_TO_SCHEDULER); + RECORD_END(); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_RecordEnterTimer() +* +* Function description +* Format and send a Timer entry event. +* +* Parameters +* TimerId - Id of the timer which starts. +*/ +void SEGGER_SYSVIEW_RecordEnterTimer(U32 TimerId) { + U8* pPayload; + U8* pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_QUANTA_U32); + // + pPayload = pPayloadStart; + ENCODE_U32(pPayload, SHRINK_ID(TimerId)); + _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_TIMER_ENTER); + RECORD_END(); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_RecordExitTimer() +* +* Function description +* Format and send a Timer exit event. +*/ +void SEGGER_SYSVIEW_RecordExitTimer(void) { + U8* pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE); + // + _SendPacket(pPayloadStart, pPayloadStart, SYSVIEW_EVTID_TIMER_EXIT); + RECORD_END(); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_RecordEndCall() +* +* Function description +* Format and send an End API Call event without return value. +* +* Parameters +* EventID - Id of API function which ends. +*/ +void SEGGER_SYSVIEW_RecordEndCall(unsigned int EventID) { + U8* pPayload; + U8* pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_QUANTA_U32); + // + pPayload = pPayloadStart; + ENCODE_U32(pPayload, EventID); + _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_END_CALL); + RECORD_END(); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_RecordEndCallU32() +* +* Function description +* Format and send an End API Call event with return value. +* +* Parameters +* EventID - Id of API function which ends. +* Para0 - Return value which will be returned by the API function. +*/ +void SEGGER_SYSVIEW_RecordEndCallU32(unsigned int EventID, U32 Para0) { + U8* pPayload; + U8* pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 2 * SEGGER_SYSVIEW_QUANTA_U32); + // + pPayload = pPayloadStart; + ENCODE_U32(pPayload, EventID); + ENCODE_U32(pPayload, Para0); + _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_END_CALL); + RECORD_END(); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_OnIdle() +* +* Function description +* Record an Idle event. +*/ +void SEGGER_SYSVIEW_OnIdle(void) { + U8* pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE); + // + _SendPacket(pPayloadStart, pPayloadStart, SYSVIEW_EVTID_IDLE); + RECORD_END(); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_OnTaskCreate() +* +* Function description +* Record a Task Create event. The Task Create event corresponds +* to creating a task in the OS. +* +* Parameters +* TaskId - Task ID of created task. +*/ +void SEGGER_SYSVIEW_OnTaskCreate(U32 TaskId) { + U8* pPayload; + U8* pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_QUANTA_U32); + // + pPayload = pPayloadStart; + TaskId = SHRINK_ID(TaskId); + ENCODE_U32(pPayload, TaskId); + _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_TASK_CREATE); + RECORD_END(); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_OnTaskTerminate() +* +* Function description +* Record a Task termination event. +* The Task termination event corresponds to terminating a task in +* the OS. If the TaskId is the currently active task, +* SEGGER_SYSVIEW_OnTaskStopExec may be used, either. +* +* Parameters +* TaskId - Task ID of terminated task. +*/ +void SEGGER_SYSVIEW_OnTaskTerminate(U32 TaskId) { + U8* pPayload; + U8* pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_QUANTA_U32); + // + pPayload = pPayloadStart; + TaskId = SHRINK_ID(TaskId); + ENCODE_U32(pPayload, TaskId); + _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_TASK_TERMINATE); + RECORD_END(); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_OnTaskStartExec() +* +* Function description +* Record a Task Start Execution event. The Task Start event +* corresponds to when a task has started to execute rather than +* when it is ready to execute. +* +* Parameters +* TaskId - Task ID of task that started to execute. +*/ +void SEGGER_SYSVIEW_OnTaskStartExec(U32 TaskId) { + U8* pPayload; + U8* pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_QUANTA_U32); + // + pPayload = pPayloadStart; + TaskId = SHRINK_ID(TaskId); + ENCODE_U32(pPayload, TaskId); + _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_TASK_START_EXEC); + RECORD_END(); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_OnTaskStopExec() +* +* Function description +* Record a Task Stop Execution event. The Task Stop event +* corresponds to when a task stops executing and terminates. +*/ +void SEGGER_SYSVIEW_OnTaskStopExec(void) { + U8* pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE); + // + _SendPacket(pPayloadStart, pPayloadStart, SYSVIEW_EVTID_TASK_STOP_EXEC); + RECORD_END(); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_OnTaskStartReady() +* +* Function description +* Record a Task Start Ready event. +* +* Parameters +* TaskId - Task ID of task that started to execute. +*/ +void SEGGER_SYSVIEW_OnTaskStartReady(U32 TaskId) { + U8* pPayload; + U8* pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_QUANTA_U32); + // + pPayload = pPayloadStart; + TaskId = SHRINK_ID(TaskId); + ENCODE_U32(pPayload, TaskId); + _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_TASK_START_READY); + RECORD_END(); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_OnTaskStopReady() +* +* Function description +* Record a Task Stop Ready event. +* +* Parameters +* TaskId - Task ID of task that completed execution. +* Cause - Reason for task to stop (i.e. Idle/Sleep) +*/ +void SEGGER_SYSVIEW_OnTaskStopReady(U32 TaskId, unsigned int Cause) { + U8* pPayload; + U8* pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 2 * SEGGER_SYSVIEW_QUANTA_U32); + // + pPayload = pPayloadStart; + TaskId = SHRINK_ID(TaskId); + ENCODE_U32(pPayload, TaskId); + ENCODE_U32(pPayload, Cause); + _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_TASK_STOP_READY); + RECORD_END(); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_MarkStart() +* +* Function description +* Record a Performance Marker Start event to start measuring runtime. +* +* Parameters +* MarkerId - User defined ID for the marker. +*/ +void SEGGER_SYSVIEW_MarkStart(unsigned MarkerId) { + U8* pPayload; + U8* pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_QUANTA_U32); + // + pPayload = pPayloadStart; + ENCODE_U32(pPayload, MarkerId); + _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_MARK_START); + RECORD_END(); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_MarkStop() +* +* Function description +* Record a Performance Marker Stop event to stop measuring runtime. +* +* Parameters +* MarkerId - User defined ID for the marker. +*/ +void SEGGER_SYSVIEW_MarkStop(unsigned MarkerId) { + U8 * pPayload; + U8 * pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_QUANTA_U32); + // + pPayload = pPayloadStart; + ENCODE_U32(pPayload, MarkerId); + _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_MARK_STOP); + RECORD_END(); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_Mark() +* +* Function description +* Record a Performance Marker intermediate event. +* +* Parameters +* MarkerId - User defined ID for the marker. +*/ +void SEGGER_SYSVIEW_Mark(unsigned int MarkerId) { + U8* pPayload; + U8* pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 2 * SEGGER_SYSVIEW_QUANTA_U32); + // + pPayload = pPayloadStart; + ENCODE_U32(pPayload, SYSVIEW_EVTID_EX_MARK); + ENCODE_U32(pPayload, MarkerId); + _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_EX); + RECORD_END(); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_NameMarker() +* +* Function description +* Send the name of a Performance Marker to be displayed in SystemView. +* +* Marker names are usually set in the system description +* callback, to ensure it is only sent when the SystemView Application +* is connected. +* +* Parameters +* MarkerId - User defined ID for the marker. +* sName - Pointer to the marker name. (Max. SEGGER_SYSVIEW_MAX_STRING_LEN Bytes) +*/ +void SEGGER_SYSVIEW_NameMarker(unsigned int MarkerId, const char* sName) { + U8* pPayload; + U8* pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 2 * SEGGER_SYSVIEW_QUANTA_U32 + 1 + SEGGER_SYSVIEW_MAX_STRING_LEN); + // + pPayload = pPayloadStart; + ENCODE_U32(pPayload, SYSVIEW_EVTID_EX_NAME_MARKER); + ENCODE_U32(pPayload, MarkerId); + pPayload = _EncodeStr(pPayload, sName, SEGGER_SYSVIEW_MAX_STRING_LEN); + _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_EX); + RECORD_END(); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_NameResource() +* +* Function description +* Send the name of a resource to be displayed in SystemView. +* +* Marker names are usually set in the system description +* callback, to ensure it is only sent when the SystemView Application +* is connected. +* +* Parameters +* ResourceId - Id of the resource to be named. i.e. its address. +* sName - Pointer to the resource name. (Max. SEGGER_SYSVIEW_MAX_STRING_LEN Bytes) +*/ +void SEGGER_SYSVIEW_NameResource(U32 ResourceId, const char* sName) { + U8* pPayload; + U8* pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_QUANTA_U32 + 1 + SEGGER_SYSVIEW_MAX_STRING_LEN); + // + pPayload = pPayloadStart; + ENCODE_U32(pPayload, SHRINK_ID(ResourceId)); + pPayload = _EncodeStr(pPayload, sName, SEGGER_SYSVIEW_MAX_STRING_LEN); + _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_NAME_RESOURCE); + RECORD_END(); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_SendPacket() +* +* Function description +* Send an event packet. +* +* Parameters +* pPacket - Pointer to the start of the packet. +* pPayloadEnd - Pointer to the end of the payload. +* Make sure there are at least 5 bytes free after the payload. +* EventId - Id of the event packet. +* +* Return value +* !=0: Success, Message sent. +* ==0: Buffer full, Message *NOT* sent. +*/ +int SEGGER_SYSVIEW_SendPacket(U8* pPacket, U8* pPayloadEnd, unsigned int EventId) { +#if (SEGGER_SYSVIEW_USE_STATIC_BUFFER == 1) + SEGGER_SYSVIEW_LOCK(); +#endif + _SendPacket(pPacket + 4, pPayloadEnd, EventId); +#if (SEGGER_SYSVIEW_USE_STATIC_BUFFER == 1) + SEGGER_SYSVIEW_UNLOCK(); +#endif + return 0; +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_EncodeU32() +* +* Function description +* Encode a U32 in variable-length format. +* +* Parameters +* pPayload - Pointer to where U32 will be encoded. +* Value - The 32-bit value to be encoded. +* +* Return value +* Pointer to the byte following the value, i.e. the first free +* byte in the payload and the next position to store payload +* content. +*/ +U8* SEGGER_SYSVIEW_EncodeU32(U8* pPayload, U32 Value) { + ENCODE_U32(pPayload, Value); + return pPayload; +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_EncodeString() +* +* Function description +* Encode a string in variable-length format. +* +* Parameters +* pPayload - Pointer to where string will be encoded. +* s - String to encode. +* MaxLen - Maximum number of characters to encode from string. +* +* Return value +* Pointer to the byte following the value, i.e. the first free +* byte in the payload and the next position to store payload +* content. +* +* Additional information +* The string is encoded as a count byte followed by the contents +* of the string. +* No more than 1 + MaxLen bytes will be encoded to the payload. +*/ +U8* SEGGER_SYSVIEW_EncodeString(U8* pPayload, const char* s, unsigned int MaxLen) { + return _EncodeStr(pPayload, s, MaxLen); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_EncodeData() +* +* Function description +* Encode a byte buffer in variable-length format. +* +* Parameters +* pPayload - Pointer to where string will be encoded. +* pSrc - Pointer to data buffer to be encoded. +* NumBytes - Number of bytes in the buffer to be encoded. +* +* Return value +* Pointer to the byte following the value, i.e. the first free +* byte in the payload and the next position to store payload +* content. +* +* Additional information +* The data is encoded as a count byte followed by the contents +* of the data buffer. +* Make sure NumBytes + 1 bytes are free for the payload. +*/ +U8* SEGGER_SYSVIEW_EncodeData(U8 *pPayload, const char* pSrc, unsigned int NumBytes) { + return _EncodeData(pPayload, pSrc, NumBytes); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_EncodeId() +* +* Function description +* Encode a 32-bit Id in shrunken variable-length format. +* +* Parameters +* pPayload - Pointer to where the Id will be encoded. +* Id - The 32-bit value to be encoded. +* +* Return value +* Pointer to the byte following the value, i.e. the first free +* byte in the payload and the next position to store payload +* content. +* +* Additional information +* The parameters to shrink an Id can be configured in +* SEGGER_SYSVIEW_Conf.h and via SEGGER_SYSVIEW_SetRAMBase(). +* SEGGER_SYSVIEW_ID_BASE: Lowest Id reported by the application. +* (i.e. 0x20000000 when all Ids are an address in this RAM) +* SEGGER_SYSVIEW_ID_SHIFT: Number of bits to shift the Id to +* save bandwidth. (i.e. 2 when Ids are 4 byte aligned) +*/ +U8* SEGGER_SYSVIEW_EncodeId(U8* pPayload, U32 Id) { + Id = SHRINK_ID(Id); + ENCODE_U32(pPayload, Id); + return pPayload; +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_ShrinkId() +* +* Function description +* Get the shrunken value of an Id for further processing like in +* SEGGER_SYSVIEW_NameResource(). +* +* Parameters +* Id - The 32-bit value to be shrunken. +* +* Return value +* Shrunken Id. +* +* Additional information +* The parameters to shrink an Id can be configured in +* SEGGER_SYSVIEW_Conf.h and via SEGGER_SYSVIEW_SetRAMBase(). +* SEGGER_SYSVIEW_ID_BASE: Lowest Id reported by the application. +* (i.e. 0x20000000 when all Ids are an address in this RAM) +* SEGGER_SYSVIEW_ID_SHIFT: Number of bits to shift the Id to +* save bandwidth. (i.e. 2 when Ids are 4 byte aligned) +*/ +U32 SEGGER_SYSVIEW_ShrinkId(U32 Id) { + return SHRINK_ID(Id); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_RegisterModule() +* +* Function description +* Register a middleware module for recording its events. +* +* Parameters +* pModule - The middleware module information. +* +* Additional information +* SEGGER_SYSVIEW_MODULE elements: +* sDescription - Pointer to a string containing the module name and optionally the module event description. +* NumEvents - Number of events the module wants to register. +* EventOffset - Offset to be added to the event Ids. Out parameter, set by this function. Do not modify after calling this function. +* pfSendModuleDesc - Callback function pointer to send more detailed module description to SystemView Application. +* pNext - Pointer to next registered module. Out parameter, set by this function. Do not modify after calling this function. +*/ +void SEGGER_SYSVIEW_RegisterModule(SEGGER_SYSVIEW_MODULE* pModule) { + SEGGER_SYSVIEW_LOCK(); + if (_pFirstModule == 0) { + // + // No module registered, yet. + // Start list with new module. + // EventOffset is the base offset for modules + // + pModule->EventOffset = MODULE_EVENT_OFFSET; + pModule->pNext = 0; + _pFirstModule = pModule; + _NumModules = 1; + } else { + // + // Registreded module(s) present. + // Prepend new module in list. + // EventOffset set from number of events and offset of previous module. + // + pModule->EventOffset = _pFirstModule->EventOffset + _pFirstModule->NumEvents; + pModule->pNext = _pFirstModule; + _pFirstModule = pModule; + _NumModules++; + } + SEGGER_SYSVIEW_SendModule(0); + if (pModule->pfSendModuleDesc) { + pModule->pfSendModuleDesc(); + } + SEGGER_SYSVIEW_UNLOCK(); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_RecordModuleDescription() +* +* Function description +* Sends detailed information of a registered module to the host. +* +* Parameters +* pModule - Pointer to the described module. +* sDescription - Pointer to a description string. +*/ +void SEGGER_SYSVIEW_RecordModuleDescription(const SEGGER_SYSVIEW_MODULE* pModule, const char* sDescription) { + U8 ModuleId; + SEGGER_SYSVIEW_MODULE* p; + + p = _pFirstModule; + ModuleId = 0; + do { + if (p == pModule) { + break; + } + ModuleId++; + p = p->pNext; + } while (p); + { + U8* pPayload; + U8* pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 2 * SEGGER_SYSVIEW_QUANTA_U32 + 1 + SEGGER_SYSVIEW_MAX_STRING_LEN); + // + pPayload = pPayloadStart; + // + // Send module description + // Send event offset and number of events + // + ENCODE_U32(pPayload, ModuleId); + ENCODE_U32(pPayload, (pModule->EventOffset)); + pPayload = _EncodeStr(pPayload, sDescription, SEGGER_SYSVIEW_MAX_STRING_LEN); + _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_MODULEDESC); + RECORD_END(); + } +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_SendModule() +* +* Function description +* Sends the information of a registered module to the host. +* +* Parameters +* ModuleId - Id of the requested module. +*/ +void SEGGER_SYSVIEW_SendModule(U8 ModuleId) { + SEGGER_SYSVIEW_MODULE* pModule; + U32 n; + + if (_pFirstModule != 0) { + pModule = _pFirstModule; + for (n = 0; n < ModuleId; n++) { + pModule = pModule->pNext; + if (pModule == 0) { + break; + } + } + if (pModule != 0) { + U8* pPayload; + U8* pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 2 * SEGGER_SYSVIEW_QUANTA_U32 + 1 + SEGGER_SYSVIEW_MAX_STRING_LEN); + // + pPayload = pPayloadStart; + // + // Send module description + // Send event offset and number of events + // + ENCODE_U32(pPayload, ModuleId); + ENCODE_U32(pPayload, (pModule->EventOffset)); + pPayload = _EncodeStr(pPayload, pModule->sModule, SEGGER_SYSVIEW_MAX_STRING_LEN); + _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_MODULEDESC); + RECORD_END(); + } + } +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_SendModuleDescription() +* +* Function description +* Triggers a send of the registered module descriptions. +* +*/ +void SEGGER_SYSVIEW_SendModuleDescription(void) { + SEGGER_SYSVIEW_MODULE* pModule; + + if (_pFirstModule != 0) { + pModule = _pFirstModule; + do { + if (pModule->pfSendModuleDesc) { + pModule->pfSendModuleDesc(); + } + pModule = pModule->pNext; + } while (pModule); + } +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_SendNumModules() +* +* Function description +* Send the number of registered modules to the host. +*/ +void SEGGER_SYSVIEW_SendNumModules(void) { + U8* pPayload; + U8* pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 2*SEGGER_SYSVIEW_QUANTA_U32); + pPayload = pPayloadStart; + ENCODE_U32(pPayload, _NumModules); + _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_NUMMODULES); + RECORD_END(); +} + +#ifndef SEGGER_SYSVIEW_EXCLUDE_PRINTF // Define in project to avoid warnings about variable parameter list + +/********************************************************************* +* +* SEGGER_SYSVIEW_PrintfHostEx() +* +* Function description +* Print a string which is formatted on the host by the SystemView Application +* with Additional information. +* +* Parameters +* s - String to be formatted. +* Options - Options for the string. i.e. Log level. +* +* Additional information +* All format arguments are treated as 32-bit scalar values. +*/ +void SEGGER_SYSVIEW_PrintfHostEx(const char* s, U32 Options, ...) { + va_list ParamList; +#if SEGGER_SYSVIEW_PRINTF_IMPLICIT_FORMAT + int r; + + va_start(ParamList, Options); + r = _VPrintHost(s, Options, &ParamList); + va_end(ParamList); + + if (r == -1) { + va_start(ParamList, Options); + _VPrintTarget(s, Options, &ParamList); + va_end(ParamList); + } +#else + va_start(ParamList, Options); + _VPrintHost(s, Options, &ParamList); + va_end(ParamList); +#endif +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_PrintfHost() +* +* Function description +* Print a string which is formatted on the host by the SystemView Application. +* +* Parameters +* s - String to be formatted. +* +* Additional information +* All format arguments are treated as 32-bit scalar values. +*/ +void SEGGER_SYSVIEW_PrintfHost(const char* s, ...) { + va_list ParamList; +#if SEGGER_SYSVIEW_PRINTF_IMPLICIT_FORMAT + int r; + + va_start(ParamList, s); + r = _VPrintHost(s, SEGGER_SYSVIEW_LOG, &ParamList); + va_end(ParamList); + + if (r == -1) { + va_start(ParamList, s); + _VPrintTarget(s, SEGGER_SYSVIEW_LOG, &ParamList); + va_end(ParamList); + } +#else + va_start(ParamList, s); + _VPrintHost(s, SEGGER_SYSVIEW_LOG, &ParamList); + va_end(ParamList); +#endif +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_WarnfHost() +* +* Function description +* Print a warnin string which is formatted on the host by +* the SystemView Application. +* +* Parameters +* s - String to be formatted. +* +* Additional information +* All format arguments are treated as 32-bit scalar values. +*/ +void SEGGER_SYSVIEW_WarnfHost(const char* s, ...) { + va_list ParamList; +#if SEGGER_SYSVIEW_PRINTF_IMPLICIT_FORMAT + int r; + + va_start(ParamList, s); + r = _VPrintHost(s, SEGGER_SYSVIEW_WARNING, &ParamList); + va_end(ParamList); + + if (r == -1) { + va_start(ParamList, s); + _VPrintTarget(s, SEGGER_SYSVIEW_WARNING, &ParamList); + va_end(ParamList); + } +#else + va_start(ParamList, s); + _VPrintHost(s, SEGGER_SYSVIEW_WARNING, &ParamList); + va_end(ParamList); +#endif +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_ErrorfHost() +* +* Function description +* Print an error string which is formatted on the host by +* the SystemView Application. +* +* Parameters +* s - String to be formatted. +* +* Additional information +* All format arguments are treated as 32-bit scalar values. +*/ +void SEGGER_SYSVIEW_ErrorfHost(const char* s, ...) { + va_list ParamList; +#if SEGGER_SYSVIEW_PRINTF_IMPLICIT_FORMAT + int r; + + va_start(ParamList, s); + r = _VPrintHost(s, SEGGER_SYSVIEW_ERROR, &ParamList); + va_end(ParamList); + + if (r == -1) { + va_start(ParamList, s); + _VPrintTarget(s, SEGGER_SYSVIEW_ERROR, &ParamList); + va_end(ParamList); + } +#else + va_start(ParamList, s); + _VPrintHost(s, SEGGER_SYSVIEW_ERROR, &ParamList); + va_end(ParamList); +#endif +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_PrintfTargetEx() +* +* Function description +* Print a string which is formatted on the target before sent to +* the host with Additional information. +* +* Parameters +* s - String to be formatted. +* Options - Options for the string. i.e. Log level. +*/ +void SEGGER_SYSVIEW_PrintfTargetEx(const char* s, U32 Options, ...) { + va_list ParamList; + + va_start(ParamList, Options); + _VPrintTarget(s, Options, &ParamList); + va_end(ParamList); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_PrintfTarget() +* +* Function description +* Print a string which is formatted on the target before sent to +* the host. +* +* Parameters +* s - String to be formatted. +*/ +void SEGGER_SYSVIEW_PrintfTarget(const char* s, ...) { + va_list ParamList; + + va_start(ParamList, s); + _VPrintTarget(s, SEGGER_SYSVIEW_LOG, &ParamList); + va_end(ParamList); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_WarnfTarget() +* +* Function description +* Print a warning string which is formatted on the target before +* sent to the host. +* +* Parameters +* s - String to be formatted. +*/ +void SEGGER_SYSVIEW_WarnfTarget(const char* s, ...) { + va_list ParamList; + + va_start(ParamList, s); + _VPrintTarget(s, SEGGER_SYSVIEW_WARNING, &ParamList); + va_end(ParamList); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_ErrorfTarget() +* +* Function description +* Print an error string which is formatted on the target before +* sent to the host. +* +* Parameters +* s - String to be formatted. +*/ +void SEGGER_SYSVIEW_ErrorfTarget(const char* s, ...) { + va_list ParamList; + + va_start(ParamList, s); + _VPrintTarget(s, SEGGER_SYSVIEW_ERROR, &ParamList); + va_end(ParamList); +} +#endif // SEGGER_SYSVIEW_EXCLUDE_PRINTF + +/********************************************************************* +* +* SEGGER_SYSVIEW_Print() +* +* Function description +* Print a string to the host. +* +* Parameters +* s - String to sent. +*/ +void SEGGER_SYSVIEW_Print(const char* s) { + U8* pPayload; + U8* pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 2 * SEGGER_SYSVIEW_QUANTA_U32 + SEGGER_SYSVIEW_MAX_STRING_LEN); + // + pPayload = _EncodeStr(pPayloadStart, s, SEGGER_SYSVIEW_MAX_STRING_LEN); + ENCODE_U32(pPayload, SEGGER_SYSVIEW_LOG); + ENCODE_U32(pPayload, 0); + _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_PRINT_FORMATTED); + RECORD_END(); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_Warn() +* +* Function description +* Print a warning string to the host. +* +* Parameters +* s - String to sent. +*/ +void SEGGER_SYSVIEW_Warn(const char* s) { + U8* pPayload; + U8* pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 2 * SEGGER_SYSVIEW_QUANTA_U32 + SEGGER_SYSVIEW_MAX_STRING_LEN); + // + pPayload = _EncodeStr(pPayloadStart, s, SEGGER_SYSVIEW_MAX_STRING_LEN); + ENCODE_U32(pPayload, SEGGER_SYSVIEW_WARNING); + ENCODE_U32(pPayload, 0); + _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_PRINT_FORMATTED); + RECORD_END(); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_Error() +* +* Function description +* Print an error string to the host. +* +* Parameters +* s - String to sent. +*/ +void SEGGER_SYSVIEW_Error(const char* s) { + U8* pPayload; + U8* pPayloadStart; + RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 2 * SEGGER_SYSVIEW_QUANTA_U32 + SEGGER_SYSVIEW_MAX_STRING_LEN); + // + pPayload = _EncodeStr(pPayloadStart, s, SEGGER_SYSVIEW_MAX_STRING_LEN); + ENCODE_U32(pPayload, SEGGER_SYSVIEW_ERROR); + ENCODE_U32(pPayload, 0); + _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_PRINT_FORMATTED); + RECORD_END(); +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_EnableEvents() +* +* Function description +* Enable standard SystemView events to be generated. +* +* Parameters +* EnableMask - Events to be enabled. +*/ +void SEGGER_SYSVIEW_EnableEvents(U32 EnableMask) { + _SYSVIEW_Globals.DisabledEvents &= ~EnableMask; +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_DisableEvents() +* +* Function description +* Disable standard SystemView events to not be generated. +* +* Parameters +* DisableMask - Events to be disabled. +*/ +void SEGGER_SYSVIEW_DisableEvents(U32 DisableMask) { + _SYSVIEW_Globals.DisabledEvents |= DisableMask; +} + +/********************************************************************* +* +* SEGGER_SYSVIEW_IsStarted() +* +* Function description +* Handle incoming packets if any and check if recording is started. +* +* Return value +* 0: Recording not started. +* > 0: Recording started. +*/ +int SEGGER_SYSVIEW_IsStarted(void) { +#if (SEGGER_SYSVIEW_POST_MORTEM_MODE != 1) + // + // Check if host is sending data which needs to be processed. + // + if (SEGGER_RTT_HASDATA(CHANNEL_ID_DOWN)) { + if (_SYSVIEW_Globals.RecursionCnt == 0) { // Avoid uncontrolled nesting. This way, this routine can call itself once, but no more often than that. + _SYSVIEW_Globals.RecursionCnt = 1; + _HandleIncomingPacket(); + _SYSVIEW_Globals.RecursionCnt = 0; + } + } +#endif + return _SYSVIEW_Globals.EnableState; +} + + +/*************************** End of file ****************************/ diff --git a/core/embed/segger/SEGGER/SEGGER_SYSVIEW.h b/core/embed/segger/SEGGER/SEGGER_SYSVIEW.h index aff9422c59..cf618057ed 100644 --- a/core/embed/segger/SEGGER/SEGGER_SYSVIEW.h +++ b/core/embed/segger/SEGGER/SEGGER_SYSVIEW.h @@ -1,370 +1,370 @@ -/********************************************************************* -* SEGGER Microcontroller GmbH * -* The Embedded Experts * -********************************************************************** -* * -* (c) 1995 - 2019 SEGGER Microcontroller GmbH * -* * -* www.segger.com Support: support@segger.com * -* * -********************************************************************** -* * -* SEGGER SystemView * Real-time application analysis * -* * -********************************************************************** -* * -* All rights reserved. * -* * -* SEGGER strongly recommends to not make any changes * -* to or modify the source code of this software in order to stay * -* compatible with the SystemView and RTT protocol, and J-Link. * -* * -* Redistribution and use in source and binary forms, with or * -* without modification, are permitted provided that the following * -* condition is met: * -* * -* o Redistributions of source code must retain the above copyright * -* notice, this condition and the following disclaimer. * -* * -* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND * -* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * -* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * -* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * -* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR * -* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * -* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * -* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * -* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * -* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * -* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE * -* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH * -* DAMAGE. * -* * -********************************************************************** -* * -* SystemView version: 3.20 * -* * -********************************************************************** --------------------------- END-OF-HEADER ----------------------------- -File : SEGGER_SYSVIEW.h -Purpose : System visualization API. -Revision: $Rev: 21292 $ -*/ - -#ifndef SEGGER_SYSVIEW_H -#define SEGGER_SYSVIEW_H - -/********************************************************************* -* -* #include Section -* -********************************************************************** -*/ - -#include "SEGGER.h" -#include "SEGGER_SYSVIEW_ConfDefaults.h" - -#ifdef __cplusplus -extern "C" { -#endif - - -/********************************************************************* -* -* Defines, fixed -* -********************************************************************** -*/ - -#define SEGGER_SYSVIEW_MAJOR 3 -#define SEGGER_SYSVIEW_MINOR 10 -#define SEGGER_SYSVIEW_REV 0 -#define SEGGER_SYSVIEW_VERSION ((SEGGER_SYSVIEW_MAJOR * 10000) + (SEGGER_SYSVIEW_MINOR * 100) + SEGGER_SYSVIEW_REV) - -#define SEGGER_SYSVIEW_INFO_SIZE 9 // Minimum size, which has to be reserved for a packet. 1-2 byte of message type, 0-2 byte of payload length, 1-5 bytes of timestamp. -#define SEGGER_SYSVIEW_QUANTA_U32 5 // Maximum number of bytes to encode a U32, should be reserved for each 32-bit value in a packet. - -#define SEGGER_SYSVIEW_LOG (0u) -#define SEGGER_SYSVIEW_WARNING (1u) -#define SEGGER_SYSVIEW_ERROR (2u) -#define SEGGER_SYSVIEW_FLAG_APPEND (1u << 6) - -#define SEGGER_SYSVIEW_PREPARE_PACKET(p) (p) + 4 -// -// SystemView events. First 32 IDs from 0 .. 31 are reserved for these -// -#define SYSVIEW_EVTID_NOP 0 // Dummy packet. -#define SYSVIEW_EVTID_OVERFLOW 1 -#define SYSVIEW_EVTID_ISR_ENTER 2 -#define SYSVIEW_EVTID_ISR_EXIT 3 -#define SYSVIEW_EVTID_TASK_START_EXEC 4 -#define SYSVIEW_EVTID_TASK_STOP_EXEC 5 -#define SYSVIEW_EVTID_TASK_START_READY 6 -#define SYSVIEW_EVTID_TASK_STOP_READY 7 -#define SYSVIEW_EVTID_TASK_CREATE 8 -#define SYSVIEW_EVTID_TASK_INFO 9 -#define SYSVIEW_EVTID_TRACE_START 10 -#define SYSVIEW_EVTID_TRACE_STOP 11 -#define SYSVIEW_EVTID_SYSTIME_CYCLES 12 -#define SYSVIEW_EVTID_SYSTIME_US 13 -#define SYSVIEW_EVTID_SYSDESC 14 -#define SYSVIEW_EVTID_MARK_START 15 -#define SYSVIEW_EVTID_MARK_STOP 16 -#define SYSVIEW_EVTID_IDLE 17 -#define SYSVIEW_EVTID_ISR_TO_SCHEDULER 18 -#define SYSVIEW_EVTID_TIMER_ENTER 19 -#define SYSVIEW_EVTID_TIMER_EXIT 20 -#define SYSVIEW_EVTID_STACK_INFO 21 -#define SYSVIEW_EVTID_MODULEDESC 22 - -#define SYSVIEW_EVTID_INIT 24 -#define SYSVIEW_EVTID_NAME_RESOURCE 25 -#define SYSVIEW_EVTID_PRINT_FORMATTED 26 -#define SYSVIEW_EVTID_NUMMODULES 27 -#define SYSVIEW_EVTID_END_CALL 28 -#define SYSVIEW_EVTID_TASK_TERMINATE 29 - -#define SYSVIEW_EVTID_EX 31 -// -// SystemView extended events. Sent with ID 31. -// -#define SYSVIEW_EVTID_EX_MARK 0 -#define SYSVIEW_EVTID_EX_NAME_MARKER 1 -// -// Event masks to disable/enable events -// -#define SYSVIEW_EVTMASK_NOP (1 << SYSVIEW_EVTID_NOP) -#define SYSVIEW_EVTMASK_OVERFLOW (1 << SYSVIEW_EVTID_OVERFLOW) -#define SYSVIEW_EVTMASK_ISR_ENTER (1 << SYSVIEW_EVTID_ISR_ENTER) -#define SYSVIEW_EVTMASK_ISR_EXIT (1 << SYSVIEW_EVTID_ISR_EXIT) -#define SYSVIEW_EVTMASK_TASK_START_EXEC (1 << SYSVIEW_EVTID_TASK_START_EXEC) -#define SYSVIEW_EVTMASK_TASK_STOP_EXEC (1 << SYSVIEW_EVTID_TASK_STOP_EXEC) -#define SYSVIEW_EVTMASK_TASK_START_READY (1 << SYSVIEW_EVTID_TASK_START_READY) -#define SYSVIEW_EVTMASK_TASK_STOP_READY (1 << SYSVIEW_EVTID_TASK_STOP_READY) -#define SYSVIEW_EVTMASK_TASK_CREATE (1 << SYSVIEW_EVTID_TASK_CREATE) -#define SYSVIEW_EVTMASK_TASK_INFO (1 << SYSVIEW_EVTID_TASK_INFO) -#define SYSVIEW_EVTMASK_TRACE_START (1 << SYSVIEW_EVTID_TRACE_START) -#define SYSVIEW_EVTMASK_TRACE_STOP (1 << SYSVIEW_EVTID_TRACE_STOP) -#define SYSVIEW_EVTMASK_SYSTIME_CYCLES (1 << SYSVIEW_EVTID_SYSTIME_CYCLES) -#define SYSVIEW_EVTMASK_SYSTIME_US (1 << SYSVIEW_EVTID_SYSTIME_US) -#define SYSVIEW_EVTMASK_SYSDESC (1 << SYSVIEW_EVTID_SYSDESC) -#define SYSVIEW_EVTMASK_USER_START (1 << SYSVIEW_EVTID_USER_START) -#define SYSVIEW_EVTMASK_USER_STOP (1 << SYSVIEW_EVTID_USER_STOP) -#define SYSVIEW_EVTMASK_IDLE (1 << SYSVIEW_EVTID_IDLE) -#define SYSVIEW_EVTMASK_ISR_TO_SCHEDULER (1 << SYSVIEW_EVTID_ISR_TO_SCHEDULER) -#define SYSVIEW_EVTMASK_TIMER_ENTER (1 << SYSVIEW_EVTID_TIMER_ENTER) -#define SYSVIEW_EVTMASK_TIMER_EXIT (1 << SYSVIEW_EVTID_TIMER_EXIT) -#define SYSVIEW_EVTMASK_STACK_INFO (1 << SYSVIEW_EVTID_STACK_INFO) -#define SYSVIEW_EVTMASK_MODULEDESC (1 << SYSVIEW_EVTID_MODULEDESC) - -#define SYSVIEW_EVTMASK_INIT (1 << SYSVIEW_EVTID_INIT) -#define SYSVIEW_EVTMASK_NAME_RESOURCE (1 << SYSVIEW_EVTID_NAME_RESOURCE) -#define SYSVIEW_EVTMASK_PRINT_FORMATTED (1 << SYSVIEW_EVTID_PRINT_FORMATTED) -#define SYSVIEW_EVTMASK_NUMMODULES (1 << SYSVIEW_EVTID_NUMMODULES) -#define SYSVIEW_EVTMASK_END_CALL (1 << SYSVIEW_EVTID_END_CALL) -#define SYSVIEW_EVTMASK_TASK_TERMINATE (1 << SYSVIEW_EVTID_TASK_TERMINATE) - -#define SYSVIEW_EVTMASK_EX (1 << SYSVIEW_EVTID_EX) - -#define SYSVIEW_EVTMASK_ALL_INTERRUPTS ( SYSVIEW_EVTMASK_ISR_ENTER \ - | SYSVIEW_EVTMASK_ISR_EXIT \ - | SYSVIEW_EVTMASK_ISR_TO_SCHEDULER) -#define SYSVIEW_EVTMASK_ALL_TASKS ( SYSVIEW_EVTMASK_TASK_START_EXEC \ - | SYSVIEW_EVTMASK_TASK_STOP_EXEC \ - | SYSVIEW_EVTMASK_TASK_START_READY \ - | SYSVIEW_EVTMASK_TASK_STOP_READY \ - | SYSVIEW_EVTMASK_TASK_CREATE \ - | SYSVIEW_EVTMASK_TASK_INFO \ - | SYSVIEW_EVTMASK_STACK_INFO \ - | SYSVIEW_EVTMASK_TASK_TERMINATE) - -/********************************************************************* -* -* Structures -* -********************************************************************** -*/ - -typedef struct { - U32 TaskID; - const char* sName; - U32 Prio; - U32 StackBase; - U32 StackSize; -} SEGGER_SYSVIEW_TASKINFO; - -typedef struct SEGGER_SYSVIEW_MODULE_STRUCT SEGGER_SYSVIEW_MODULE; - -struct SEGGER_SYSVIEW_MODULE_STRUCT { - const char* sModule; - U32 NumEvents; - U32 EventOffset; - void (*pfSendModuleDesc)(void); - SEGGER_SYSVIEW_MODULE* pNext; -}; - -typedef void (SEGGER_SYSVIEW_SEND_SYS_DESC_FUNC)(void); - - -/********************************************************************* -* -* Global data -* -********************************************************************** -*/ - -#ifdef EXTERN - #undef EXTERN -#endif - -#ifndef SEGGER_SYSVIEW_C // Defined in SEGGER_SYSVIEW.c which includes this header beside other C-files - #define EXTERN extern -#else - #define EXTERN -#endif - -EXTERN unsigned int SEGGER_SYSVIEW_TickCnt; -EXTERN unsigned int SEGGER_SYSVIEW_InterruptId; - -#undef EXTERN - -/********************************************************************* -* -* API functions -* -********************************************************************** -*/ - -typedef struct { - U64 (*pfGetTime) (void); - void (*pfSendTaskList) (void); -} SEGGER_SYSVIEW_OS_API; - -/********************************************************************* -* -* Control and initialization functions -*/ -void SEGGER_SYSVIEW_Init (U32 SysFreq, U32 CPUFreq, const SEGGER_SYSVIEW_OS_API *pOSAPI, SEGGER_SYSVIEW_SEND_SYS_DESC_FUNC pfSendSysDesc); -void SEGGER_SYSVIEW_SetRAMBase (U32 RAMBaseAddress); -void SEGGER_SYSVIEW_Start (void); -void SEGGER_SYSVIEW_Stop (void); -void SEGGER_SYSVIEW_GetSysDesc (void); -void SEGGER_SYSVIEW_SendTaskList (void); -void SEGGER_SYSVIEW_SendTaskInfo (const SEGGER_SYSVIEW_TASKINFO* pInfo); -void SEGGER_SYSVIEW_SendSysDesc (const char* sSysDesc); -int SEGGER_SYSVIEW_IsStarted (void); -int SEGGER_SYSVIEW_GetChannelID (void); - -/********************************************************************* -* -* Event recording functions -*/ -void SEGGER_SYSVIEW_RecordVoid (unsigned int EventId); -void SEGGER_SYSVIEW_RecordU32 (unsigned int EventId, U32 Para0); -void SEGGER_SYSVIEW_RecordU32x2 (unsigned int EventId, U32 Para0, U32 Para1); -void SEGGER_SYSVIEW_RecordU32x3 (unsigned int EventId, U32 Para0, U32 Para1, U32 Para2); -void SEGGER_SYSVIEW_RecordU32x4 (unsigned int EventId, U32 Para0, U32 Para1, U32 Para2, U32 Para3); -void SEGGER_SYSVIEW_RecordU32x5 (unsigned int EventId, U32 Para0, U32 Para1, U32 Para2, U32 Para3, U32 Para4); -void SEGGER_SYSVIEW_RecordU32x6 (unsigned int EventId, U32 Para0, U32 Para1, U32 Para2, U32 Para3, U32 Para4, U32 Para5); -void SEGGER_SYSVIEW_RecordU32x7 (unsigned int EventId, U32 Para0, U32 Para1, U32 Para2, U32 Para3, U32 Para4, U32 Para5, U32 Para6); -void SEGGER_SYSVIEW_RecordU32x8 (unsigned int EventId, U32 Para0, U32 Para1, U32 Para2, U32 Para3, U32 Para4, U32 Para5, U32 Para6, U32 Para7); -void SEGGER_SYSVIEW_RecordU32x9 (unsigned int EventId, U32 Para0, U32 Para1, U32 Para2, U32 Para3, U32 Para4, U32 Para5, U32 Para6, U32 Para7, U32 Para8); -void SEGGER_SYSVIEW_RecordU32x10 (unsigned int EventId, U32 Para0, U32 Para1, U32 Para2, U32 Para3, U32 Para4, U32 Para5, U32 Para6, U32 Para7, U32 Para8, U32 Para9); -void SEGGER_SYSVIEW_RecordString (unsigned int EventId, const char* pString); -void SEGGER_SYSVIEW_RecordSystime (void); -void SEGGER_SYSVIEW_RecordEnterISR (void); -void SEGGER_SYSVIEW_RecordExitISR (void); -void SEGGER_SYSVIEW_RecordExitISRToScheduler (void); -void SEGGER_SYSVIEW_RecordEnterTimer (U32 TimerId); -void SEGGER_SYSVIEW_RecordExitTimer (void); -void SEGGER_SYSVIEW_RecordEndCall (unsigned int EventID); -void SEGGER_SYSVIEW_RecordEndCallU32 (unsigned int EventID, U32 Para0); - -void SEGGER_SYSVIEW_OnIdle (void); -void SEGGER_SYSVIEW_OnTaskCreate (U32 TaskId); -void SEGGER_SYSVIEW_OnTaskTerminate (U32 TaskId); -void SEGGER_SYSVIEW_OnTaskStartExec (U32 TaskId); -void SEGGER_SYSVIEW_OnTaskStopExec (void); -void SEGGER_SYSVIEW_OnTaskStartReady (U32 TaskId); -void SEGGER_SYSVIEW_OnTaskStopReady (U32 TaskId, unsigned int Cause); -void SEGGER_SYSVIEW_MarkStart (unsigned int MarkerId); -void SEGGER_SYSVIEW_MarkStop (unsigned int MarkerId); -void SEGGER_SYSVIEW_Mark (unsigned int MarkerId); -void SEGGER_SYSVIEW_NameMarker (unsigned int MarkerId, const char* sName); - -void SEGGER_SYSVIEW_NameResource (U32 ResourceId, const char* sName); - -int SEGGER_SYSVIEW_SendPacket (U8* pPacket, U8* pPayloadEnd, unsigned int EventId); - -/********************************************************************* -* -* Event parameter encoding functions -*/ -U8* SEGGER_SYSVIEW_EncodeU32 (U8* pPayload, U32 Value); -U8* SEGGER_SYSVIEW_EncodeData (U8* pPayload, const char* pSrc, unsigned int Len); -U8* SEGGER_SYSVIEW_EncodeString (U8* pPayload, const char* s, unsigned int MaxLen); -U8* SEGGER_SYSVIEW_EncodeId (U8* pPayload, U32 Id); -U32 SEGGER_SYSVIEW_ShrinkId (U32 Id); - - -/********************************************************************* -* -* Middleware module registration -*/ -void SEGGER_SYSVIEW_RegisterModule (SEGGER_SYSVIEW_MODULE* pModule); -void SEGGER_SYSVIEW_RecordModuleDescription (const SEGGER_SYSVIEW_MODULE* pModule, const char* sDescription); -void SEGGER_SYSVIEW_SendModule (U8 ModuleId); -void SEGGER_SYSVIEW_SendModuleDescription (void); -void SEGGER_SYSVIEW_SendNumModules (void); - -/********************************************************************* -* -* printf-Style functions -*/ -#ifndef SEGGER_SYSVIEW_EXCLUDE_PRINTF // Define in project to avoid warnings about variable parameter list -void SEGGER_SYSVIEW_PrintfHostEx (const char* s, U32 Options, ...); -void SEGGER_SYSVIEW_PrintfTargetEx (const char* s, U32 Options, ...); -void SEGGER_SYSVIEW_PrintfHost (const char* s, ...); -void SEGGER_SYSVIEW_PrintfTarget (const char* s, ...); -void SEGGER_SYSVIEW_WarnfHost (const char* s, ...); -void SEGGER_SYSVIEW_WarnfTarget (const char* s, ...); -void SEGGER_SYSVIEW_ErrorfHost (const char* s, ...); -void SEGGER_SYSVIEW_ErrorfTarget (const char* s, ...); -#endif - -void SEGGER_SYSVIEW_Print (const char* s); -void SEGGER_SYSVIEW_Warn (const char* s); -void SEGGER_SYSVIEW_Error (const char* s); - -/********************************************************************* -* -* Run-time configuration functions -*/ -void SEGGER_SYSVIEW_EnableEvents (U32 EnableMask); -void SEGGER_SYSVIEW_DisableEvents (U32 DisableMask); - -/********************************************************************* -* -* Application-provided functions -*/ -void SEGGER_SYSVIEW_Conf (void); -U32 SEGGER_SYSVIEW_X_GetTimestamp (void); -U32 SEGGER_SYSVIEW_X_GetInterruptId (void); - -void SEGGER_SYSVIEW_X_StartComm (void); -void SEGGER_SYSVIEW_X_OnEventRecorded (unsigned NumBytes); - -#ifdef __cplusplus -} -#endif - -/********************************************************************* -* -* Compatibility API defines -*/ -#define SEGGER_SYSVIEW_OnUserStart SEGGER_SYSVIEW_MarkStart -#define SEGGER_SYSVIEW_OnUserStop SEGGER_SYSVIEW_MarkStop - -#endif - -/*************************** End of file ****************************/ +/********************************************************************* +* SEGGER Microcontroller GmbH * +* The Embedded Experts * +********************************************************************** +* * +* (c) 1995 - 2019 SEGGER Microcontroller GmbH * +* * +* www.segger.com Support: support@segger.com * +* * +********************************************************************** +* * +* SEGGER SystemView * Real-time application analysis * +* * +********************************************************************** +* * +* All rights reserved. * +* * +* SEGGER strongly recommends to not make any changes * +* to or modify the source code of this software in order to stay * +* compatible with the SystemView and RTT protocol, and J-Link. * +* * +* Redistribution and use in source and binary forms, with or * +* without modification, are permitted provided that the following * +* condition is met: * +* * +* o Redistributions of source code must retain the above copyright * +* notice, this condition and the following disclaimer. * +* * +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND * +* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * +* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * +* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * +* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR * +* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * +* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * +* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * +* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * +* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE * +* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH * +* DAMAGE. * +* * +********************************************************************** +* * +* SystemView version: 3.20 * +* * +********************************************************************** +-------------------------- END-OF-HEADER ----------------------------- +File : SEGGER_SYSVIEW.h +Purpose : System visualization API. +Revision: $Rev: 21292 $ +*/ + +#ifndef SEGGER_SYSVIEW_H +#define SEGGER_SYSVIEW_H + +/********************************************************************* +* +* #include Section +* +********************************************************************** +*/ + +#include "SEGGER.h" +#include "SEGGER_SYSVIEW_ConfDefaults.h" + +#ifdef __cplusplus +extern "C" { +#endif + + +/********************************************************************* +* +* Defines, fixed +* +********************************************************************** +*/ + +#define SEGGER_SYSVIEW_MAJOR 3 +#define SEGGER_SYSVIEW_MINOR 10 +#define SEGGER_SYSVIEW_REV 0 +#define SEGGER_SYSVIEW_VERSION ((SEGGER_SYSVIEW_MAJOR * 10000) + (SEGGER_SYSVIEW_MINOR * 100) + SEGGER_SYSVIEW_REV) + +#define SEGGER_SYSVIEW_INFO_SIZE 9 // Minimum size, which has to be reserved for a packet. 1-2 byte of message type, 0-2 byte of payload length, 1-5 bytes of timestamp. +#define SEGGER_SYSVIEW_QUANTA_U32 5 // Maximum number of bytes to encode a U32, should be reserved for each 32-bit value in a packet. + +#define SEGGER_SYSVIEW_LOG (0u) +#define SEGGER_SYSVIEW_WARNING (1u) +#define SEGGER_SYSVIEW_ERROR (2u) +#define SEGGER_SYSVIEW_FLAG_APPEND (1u << 6) + +#define SEGGER_SYSVIEW_PREPARE_PACKET(p) (p) + 4 +// +// SystemView events. First 32 IDs from 0 .. 31 are reserved for these +// +#define SYSVIEW_EVTID_NOP 0 // Dummy packet. +#define SYSVIEW_EVTID_OVERFLOW 1 +#define SYSVIEW_EVTID_ISR_ENTER 2 +#define SYSVIEW_EVTID_ISR_EXIT 3 +#define SYSVIEW_EVTID_TASK_START_EXEC 4 +#define SYSVIEW_EVTID_TASK_STOP_EXEC 5 +#define SYSVIEW_EVTID_TASK_START_READY 6 +#define SYSVIEW_EVTID_TASK_STOP_READY 7 +#define SYSVIEW_EVTID_TASK_CREATE 8 +#define SYSVIEW_EVTID_TASK_INFO 9 +#define SYSVIEW_EVTID_TRACE_START 10 +#define SYSVIEW_EVTID_TRACE_STOP 11 +#define SYSVIEW_EVTID_SYSTIME_CYCLES 12 +#define SYSVIEW_EVTID_SYSTIME_US 13 +#define SYSVIEW_EVTID_SYSDESC 14 +#define SYSVIEW_EVTID_MARK_START 15 +#define SYSVIEW_EVTID_MARK_STOP 16 +#define SYSVIEW_EVTID_IDLE 17 +#define SYSVIEW_EVTID_ISR_TO_SCHEDULER 18 +#define SYSVIEW_EVTID_TIMER_ENTER 19 +#define SYSVIEW_EVTID_TIMER_EXIT 20 +#define SYSVIEW_EVTID_STACK_INFO 21 +#define SYSVIEW_EVTID_MODULEDESC 22 + +#define SYSVIEW_EVTID_INIT 24 +#define SYSVIEW_EVTID_NAME_RESOURCE 25 +#define SYSVIEW_EVTID_PRINT_FORMATTED 26 +#define SYSVIEW_EVTID_NUMMODULES 27 +#define SYSVIEW_EVTID_END_CALL 28 +#define SYSVIEW_EVTID_TASK_TERMINATE 29 + +#define SYSVIEW_EVTID_EX 31 +// +// SystemView extended events. Sent with ID 31. +// +#define SYSVIEW_EVTID_EX_MARK 0 +#define SYSVIEW_EVTID_EX_NAME_MARKER 1 +// +// Event masks to disable/enable events +// +#define SYSVIEW_EVTMASK_NOP (1 << SYSVIEW_EVTID_NOP) +#define SYSVIEW_EVTMASK_OVERFLOW (1 << SYSVIEW_EVTID_OVERFLOW) +#define SYSVIEW_EVTMASK_ISR_ENTER (1 << SYSVIEW_EVTID_ISR_ENTER) +#define SYSVIEW_EVTMASK_ISR_EXIT (1 << SYSVIEW_EVTID_ISR_EXIT) +#define SYSVIEW_EVTMASK_TASK_START_EXEC (1 << SYSVIEW_EVTID_TASK_START_EXEC) +#define SYSVIEW_EVTMASK_TASK_STOP_EXEC (1 << SYSVIEW_EVTID_TASK_STOP_EXEC) +#define SYSVIEW_EVTMASK_TASK_START_READY (1 << SYSVIEW_EVTID_TASK_START_READY) +#define SYSVIEW_EVTMASK_TASK_STOP_READY (1 << SYSVIEW_EVTID_TASK_STOP_READY) +#define SYSVIEW_EVTMASK_TASK_CREATE (1 << SYSVIEW_EVTID_TASK_CREATE) +#define SYSVIEW_EVTMASK_TASK_INFO (1 << SYSVIEW_EVTID_TASK_INFO) +#define SYSVIEW_EVTMASK_TRACE_START (1 << SYSVIEW_EVTID_TRACE_START) +#define SYSVIEW_EVTMASK_TRACE_STOP (1 << SYSVIEW_EVTID_TRACE_STOP) +#define SYSVIEW_EVTMASK_SYSTIME_CYCLES (1 << SYSVIEW_EVTID_SYSTIME_CYCLES) +#define SYSVIEW_EVTMASK_SYSTIME_US (1 << SYSVIEW_EVTID_SYSTIME_US) +#define SYSVIEW_EVTMASK_SYSDESC (1 << SYSVIEW_EVTID_SYSDESC) +#define SYSVIEW_EVTMASK_USER_START (1 << SYSVIEW_EVTID_USER_START) +#define SYSVIEW_EVTMASK_USER_STOP (1 << SYSVIEW_EVTID_USER_STOP) +#define SYSVIEW_EVTMASK_IDLE (1 << SYSVIEW_EVTID_IDLE) +#define SYSVIEW_EVTMASK_ISR_TO_SCHEDULER (1 << SYSVIEW_EVTID_ISR_TO_SCHEDULER) +#define SYSVIEW_EVTMASK_TIMER_ENTER (1 << SYSVIEW_EVTID_TIMER_ENTER) +#define SYSVIEW_EVTMASK_TIMER_EXIT (1 << SYSVIEW_EVTID_TIMER_EXIT) +#define SYSVIEW_EVTMASK_STACK_INFO (1 << SYSVIEW_EVTID_STACK_INFO) +#define SYSVIEW_EVTMASK_MODULEDESC (1 << SYSVIEW_EVTID_MODULEDESC) + +#define SYSVIEW_EVTMASK_INIT (1 << SYSVIEW_EVTID_INIT) +#define SYSVIEW_EVTMASK_NAME_RESOURCE (1 << SYSVIEW_EVTID_NAME_RESOURCE) +#define SYSVIEW_EVTMASK_PRINT_FORMATTED (1 << SYSVIEW_EVTID_PRINT_FORMATTED) +#define SYSVIEW_EVTMASK_NUMMODULES (1 << SYSVIEW_EVTID_NUMMODULES) +#define SYSVIEW_EVTMASK_END_CALL (1 << SYSVIEW_EVTID_END_CALL) +#define SYSVIEW_EVTMASK_TASK_TERMINATE (1 << SYSVIEW_EVTID_TASK_TERMINATE) + +#define SYSVIEW_EVTMASK_EX (1 << SYSVIEW_EVTID_EX) + +#define SYSVIEW_EVTMASK_ALL_INTERRUPTS ( SYSVIEW_EVTMASK_ISR_ENTER \ + | SYSVIEW_EVTMASK_ISR_EXIT \ + | SYSVIEW_EVTMASK_ISR_TO_SCHEDULER) +#define SYSVIEW_EVTMASK_ALL_TASKS ( SYSVIEW_EVTMASK_TASK_START_EXEC \ + | SYSVIEW_EVTMASK_TASK_STOP_EXEC \ + | SYSVIEW_EVTMASK_TASK_START_READY \ + | SYSVIEW_EVTMASK_TASK_STOP_READY \ + | SYSVIEW_EVTMASK_TASK_CREATE \ + | SYSVIEW_EVTMASK_TASK_INFO \ + | SYSVIEW_EVTMASK_STACK_INFO \ + | SYSVIEW_EVTMASK_TASK_TERMINATE) + +/********************************************************************* +* +* Structures +* +********************************************************************** +*/ + +typedef struct { + U32 TaskID; + const char* sName; + U32 Prio; + U32 StackBase; + U32 StackSize; +} SEGGER_SYSVIEW_TASKINFO; + +typedef struct SEGGER_SYSVIEW_MODULE_STRUCT SEGGER_SYSVIEW_MODULE; + +struct SEGGER_SYSVIEW_MODULE_STRUCT { + const char* sModule; + U32 NumEvents; + U32 EventOffset; + void (*pfSendModuleDesc)(void); + SEGGER_SYSVIEW_MODULE* pNext; +}; + +typedef void (SEGGER_SYSVIEW_SEND_SYS_DESC_FUNC)(void); + + +/********************************************************************* +* +* Global data +* +********************************************************************** +*/ + +#ifdef EXTERN + #undef EXTERN +#endif + +#ifndef SEGGER_SYSVIEW_C // Defined in SEGGER_SYSVIEW.c which includes this header beside other C-files + #define EXTERN extern +#else + #define EXTERN +#endif + +EXTERN unsigned int SEGGER_SYSVIEW_TickCnt; +EXTERN unsigned int SEGGER_SYSVIEW_InterruptId; + +#undef EXTERN + +/********************************************************************* +* +* API functions +* +********************************************************************** +*/ + +typedef struct { + U64 (*pfGetTime) (void); + void (*pfSendTaskList) (void); +} SEGGER_SYSVIEW_OS_API; + +/********************************************************************* +* +* Control and initialization functions +*/ +void SEGGER_SYSVIEW_Init (U32 SysFreq, U32 CPUFreq, const SEGGER_SYSVIEW_OS_API *pOSAPI, SEGGER_SYSVIEW_SEND_SYS_DESC_FUNC pfSendSysDesc); +void SEGGER_SYSVIEW_SetRAMBase (U32 RAMBaseAddress); +void SEGGER_SYSVIEW_Start (void); +void SEGGER_SYSVIEW_Stop (void); +void SEGGER_SYSVIEW_GetSysDesc (void); +void SEGGER_SYSVIEW_SendTaskList (void); +void SEGGER_SYSVIEW_SendTaskInfo (const SEGGER_SYSVIEW_TASKINFO* pInfo); +void SEGGER_SYSVIEW_SendSysDesc (const char* sSysDesc); +int SEGGER_SYSVIEW_IsStarted (void); +int SEGGER_SYSVIEW_GetChannelID (void); + +/********************************************************************* +* +* Event recording functions +*/ +void SEGGER_SYSVIEW_RecordVoid (unsigned int EventId); +void SEGGER_SYSVIEW_RecordU32 (unsigned int EventId, U32 Para0); +void SEGGER_SYSVIEW_RecordU32x2 (unsigned int EventId, U32 Para0, U32 Para1); +void SEGGER_SYSVIEW_RecordU32x3 (unsigned int EventId, U32 Para0, U32 Para1, U32 Para2); +void SEGGER_SYSVIEW_RecordU32x4 (unsigned int EventId, U32 Para0, U32 Para1, U32 Para2, U32 Para3); +void SEGGER_SYSVIEW_RecordU32x5 (unsigned int EventId, U32 Para0, U32 Para1, U32 Para2, U32 Para3, U32 Para4); +void SEGGER_SYSVIEW_RecordU32x6 (unsigned int EventId, U32 Para0, U32 Para1, U32 Para2, U32 Para3, U32 Para4, U32 Para5); +void SEGGER_SYSVIEW_RecordU32x7 (unsigned int EventId, U32 Para0, U32 Para1, U32 Para2, U32 Para3, U32 Para4, U32 Para5, U32 Para6); +void SEGGER_SYSVIEW_RecordU32x8 (unsigned int EventId, U32 Para0, U32 Para1, U32 Para2, U32 Para3, U32 Para4, U32 Para5, U32 Para6, U32 Para7); +void SEGGER_SYSVIEW_RecordU32x9 (unsigned int EventId, U32 Para0, U32 Para1, U32 Para2, U32 Para3, U32 Para4, U32 Para5, U32 Para6, U32 Para7, U32 Para8); +void SEGGER_SYSVIEW_RecordU32x10 (unsigned int EventId, U32 Para0, U32 Para1, U32 Para2, U32 Para3, U32 Para4, U32 Para5, U32 Para6, U32 Para7, U32 Para8, U32 Para9); +void SEGGER_SYSVIEW_RecordString (unsigned int EventId, const char* pString); +void SEGGER_SYSVIEW_RecordSystime (void); +void SEGGER_SYSVIEW_RecordEnterISR (void); +void SEGGER_SYSVIEW_RecordExitISR (void); +void SEGGER_SYSVIEW_RecordExitISRToScheduler (void); +void SEGGER_SYSVIEW_RecordEnterTimer (U32 TimerId); +void SEGGER_SYSVIEW_RecordExitTimer (void); +void SEGGER_SYSVIEW_RecordEndCall (unsigned int EventID); +void SEGGER_SYSVIEW_RecordEndCallU32 (unsigned int EventID, U32 Para0); + +void SEGGER_SYSVIEW_OnIdle (void); +void SEGGER_SYSVIEW_OnTaskCreate (U32 TaskId); +void SEGGER_SYSVIEW_OnTaskTerminate (U32 TaskId); +void SEGGER_SYSVIEW_OnTaskStartExec (U32 TaskId); +void SEGGER_SYSVIEW_OnTaskStopExec (void); +void SEGGER_SYSVIEW_OnTaskStartReady (U32 TaskId); +void SEGGER_SYSVIEW_OnTaskStopReady (U32 TaskId, unsigned int Cause); +void SEGGER_SYSVIEW_MarkStart (unsigned int MarkerId); +void SEGGER_SYSVIEW_MarkStop (unsigned int MarkerId); +void SEGGER_SYSVIEW_Mark (unsigned int MarkerId); +void SEGGER_SYSVIEW_NameMarker (unsigned int MarkerId, const char* sName); + +void SEGGER_SYSVIEW_NameResource (U32 ResourceId, const char* sName); + +int SEGGER_SYSVIEW_SendPacket (U8* pPacket, U8* pPayloadEnd, unsigned int EventId); + +/********************************************************************* +* +* Event parameter encoding functions +*/ +U8* SEGGER_SYSVIEW_EncodeU32 (U8* pPayload, U32 Value); +U8* SEGGER_SYSVIEW_EncodeData (U8* pPayload, const char* pSrc, unsigned int Len); +U8* SEGGER_SYSVIEW_EncodeString (U8* pPayload, const char* s, unsigned int MaxLen); +U8* SEGGER_SYSVIEW_EncodeId (U8* pPayload, U32 Id); +U32 SEGGER_SYSVIEW_ShrinkId (U32 Id); + + +/********************************************************************* +* +* Middleware module registration +*/ +void SEGGER_SYSVIEW_RegisterModule (SEGGER_SYSVIEW_MODULE* pModule); +void SEGGER_SYSVIEW_RecordModuleDescription (const SEGGER_SYSVIEW_MODULE* pModule, const char* sDescription); +void SEGGER_SYSVIEW_SendModule (U8 ModuleId); +void SEGGER_SYSVIEW_SendModuleDescription (void); +void SEGGER_SYSVIEW_SendNumModules (void); + +/********************************************************************* +* +* printf-Style functions +*/ +#ifndef SEGGER_SYSVIEW_EXCLUDE_PRINTF // Define in project to avoid warnings about variable parameter list +void SEGGER_SYSVIEW_PrintfHostEx (const char* s, U32 Options, ...); +void SEGGER_SYSVIEW_PrintfTargetEx (const char* s, U32 Options, ...); +void SEGGER_SYSVIEW_PrintfHost (const char* s, ...); +void SEGGER_SYSVIEW_PrintfTarget (const char* s, ...); +void SEGGER_SYSVIEW_WarnfHost (const char* s, ...); +void SEGGER_SYSVIEW_WarnfTarget (const char* s, ...); +void SEGGER_SYSVIEW_ErrorfHost (const char* s, ...); +void SEGGER_SYSVIEW_ErrorfTarget (const char* s, ...); +#endif + +void SEGGER_SYSVIEW_Print (const char* s); +void SEGGER_SYSVIEW_Warn (const char* s); +void SEGGER_SYSVIEW_Error (const char* s); + +/********************************************************************* +* +* Run-time configuration functions +*/ +void SEGGER_SYSVIEW_EnableEvents (U32 EnableMask); +void SEGGER_SYSVIEW_DisableEvents (U32 DisableMask); + +/********************************************************************* +* +* Application-provided functions +*/ +void SEGGER_SYSVIEW_Conf (void); +U32 SEGGER_SYSVIEW_X_GetTimestamp (void); +U32 SEGGER_SYSVIEW_X_GetInterruptId (void); + +void SEGGER_SYSVIEW_X_StartComm (void); +void SEGGER_SYSVIEW_X_OnEventRecorded (unsigned NumBytes); + +#ifdef __cplusplus +} +#endif + +/********************************************************************* +* +* Compatibility API defines +*/ +#define SEGGER_SYSVIEW_OnUserStart SEGGER_SYSVIEW_MarkStart +#define SEGGER_SYSVIEW_OnUserStop SEGGER_SYSVIEW_MarkStop + +#endif + +/*************************** End of file ****************************/ diff --git a/core/embed/segger/SEGGER/SEGGER_SYSVIEW_ConfDefaults.h b/core/embed/segger/SEGGER/SEGGER_SYSVIEW_ConfDefaults.h index 7bab163832..aefde96a58 100644 --- a/core/embed/segger/SEGGER/SEGGER_SYSVIEW_ConfDefaults.h +++ b/core/embed/segger/SEGGER/SEGGER_SYSVIEW_ConfDefaults.h @@ -1,557 +1,557 @@ -/********************************************************************* -* SEGGER Microcontroller GmbH * -* The Embedded Experts * -********************************************************************** -* * -* (c) 1995 - 2019 SEGGER Microcontroller GmbH * -* * -* www.segger.com Support: support@segger.com * -* * -********************************************************************** -* * -* SEGGER SystemView * Real-time application analysis * -* * -********************************************************************** -* * -* All rights reserved. * -* * -* SEGGER strongly recommends to not make any changes * -* to or modify the source code of this software in order to stay * -* compatible with the SystemView and RTT protocol, and J-Link. * -* * -* Redistribution and use in source and binary forms, with or * -* without modification, are permitted provided that the following * -* condition is met: * -* * -* o Redistributions of source code must retain the above copyright * -* notice, this condition and the following disclaimer. * -* * -* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND * -* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * -* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * -* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * -* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR * -* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * -* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * -* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * -* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * -* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * -* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE * -* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH * -* DAMAGE. * -* * -********************************************************************** -* * -* SystemView version: 3.20 * -* * -********************************************************************** --------------------------- END-OF-HEADER ----------------------------- -File : SEGGER_SYSVIEW_ConfDefaults.h -Purpose : Defines defaults for configurable defines used in - SEGGER SystemView. -Revision: $Rev: 21319 $ -*/ - -#ifndef SEGGER_SYSVIEW_CONFDEFAULTS_H -#define SEGGER_SYSVIEW_CONFDEFAULTS_H - -/********************************************************************* -* -* #include Section -* -********************************************************************** -*/ - -#include "SEGGER_SYSVIEW_Conf.h" -#include "SEGGER_RTT_Conf.h" - -#ifdef __cplusplus -extern "C" { -#endif - -#include -extern uint32_t svc_get_dwt_cyccnt(); - - -/********************************************************************* -* -* Defines, fixed -* -********************************************************************** -*/ -// -// Use auto-detection for SEGGER_SYSVIEW_CORE define -// based on compiler-/toolchain-specific defines -// to define SEGGER_SYSVIEW_GET_INTERRUPT_ID and SEGGER_SYSVIEW_GET_TIMESTAMP -// -#define SEGGER_SYSVIEW_CORE_OTHER 0 -#define SEGGER_SYSVIEW_CORE_CM0 1 // Cortex-M0/M0+/M1 -#define SEGGER_SYSVIEW_CORE_CM3 2 // Cortex-M3/M4/M7 -#define SEGGER_SYSVIEW_CORE_RX 3 // Renesas RX -#ifndef SEGGER_SYSVIEW_CORE - #if (defined __SES_ARM) || (defined __CROSSWORKS_ARM) || (defined __SEGGER_CC__) || (defined __GNUC__) || (defined __clang__) - #if (defined __ARM_ARCH_6M__) || (defined __ARM_ARCH_8M_BASE__) - #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM0 - #elif (defined(__ARM_ARCH_7M__) || defined(__ARM_ARCH_7EM__) || defined(__ARM_ARCH_8M_MAIN__)) - #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM3 - #endif - #elif defined(__ICCARM__) - #if (defined (__ARM6M__) && (__CORE__ == __ARM6M__)) \ - || (defined (__ARM8M_BASELINE__) && (__CORE__ == __ARM8M_BASELINE__)) - #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM0 - #elif (defined (__ARM7EM__) && (__CORE__ == __ARM7EM__)) \ - || (defined (__ARM7M__) && (__CORE__ == __ARM7M__)) \ - || (defined (__ARM8M_MAINLINE__) && (__CORE__ == __ARM8M_MAINLINE__)) \ - || (defined (__ARM8M_MAINLINE__) && (__CORE__ == __ARM8M_MAINLINE__)) - #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM3 - #endif - #elif defined(__CC_ARM) - #if (defined(__TARGET_ARCH_6S_M)) - #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM0 - #elif (defined(__TARGET_ARCH_7_M) || defined(__TARGET_ARCH_7E_M)) - #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM3 - #endif - #elif defined(__TI_ARM__) - #ifdef __TI_ARM_V6M0__ - #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM0 - #elif (defined(__TI_ARM_V7M3__) || defined(__TI_ARM_V7M4__)) - #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM3 - #endif - #elif defined(__ICCRX__) - #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_RX - #elif defined(__RX) - #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_RX - #endif - - #ifndef SEGGER_SYSVIEW_CORE - #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_OTHER - #endif -#endif - - -/********************************************************************* -* -* Defines, defaults -* -********************************************************************** -*/ -/********************************************************************* -* -* Define: SEGGER_SYSVIEW_APP_NAME -* -* Description -* The application name to be displayed in SystemView. -* Default -* "SystemView-enabled Application" -* Notes -* Convenience define to be used for SEGGER_SYSVIEW_SendSysDesc(). -*/ -#ifndef SEGGER_SYSVIEW_APP_NAME - #define SEGGER_SYSVIEW_APP_NAME "SystemView-enabled Application" -#endif - -/********************************************************************* -* -* Define: SEGGER_SYSVIEW_DEVICE_NAME -* -* Description -* The target device name to be displayed in SystemView. -* Default -* "undefined device" -* Notes -* Convenience define to be used for SEGGER_SYSVIEW_SendSysDesc(). -*/ -#ifndef SEGGER_SYSVIEW_DEVICE_NAME - #define SEGGER_SYSVIEW_DEVICE_NAME "undefined device" -#endif - -/********************************************************************* -* -* Define: SEGGER_SYSVIEW_GET_INTERRUPT_ID() -* -* Description -* Function macro to retrieve the Id of the currently active -* interrupt. -* Default -* Call user-supplied function SEGGER_SYSVIEW_X_GetInterruptId(). -* Notes -* For some known compilers and cores, a ready-to-use, core-specific -* default is set. -* ARMv7M: Read ICSR[8:0] (active vector) -* ARMv6M: Read ICSR[5:0] (active vector) -*/ -#ifndef SEGGER_SYSVIEW_GET_INTERRUPT_ID - #if SEGGER_SYSVIEW_CORE == SEGGER_SYSVIEW_CORE_CM3 - #define SEGGER_SYSVIEW_GET_INTERRUPT_ID() ((*(U32*)(0xE000ED04)) & 0x1FF) // Get the currently active interrupt Id. (i.e. read Cortex-M ICSR[8:0] = active vector) - #elif SEGGER_SYSVIEW_CORE == SEGGER_SYSVIEW_CORE_CM0 - #if defined(__ICCARM__) - #if (__VER__ > 6010000) - #define SEGGER_SYSVIEW_GET_INTERRUPT_ID() (__get_IPSR()) // Workaround for IAR, which might do a byte-access to 0xE000ED04. Read IPSR instead. - #else - #define SEGGER_SYSVIEW_GET_INTERRUPT_ID() ((*(U32*)(0xE000ED04)) & 0x3F) // Older versions of IAR do not include __get_IPSR, but might also not optimize to byte-access. - #endif - #else - #define SEGGER_SYSVIEW_GET_INTERRUPT_ID() ((*(U32*)(0xE000ED04)) & 0x3F) // Get the currently active interrupt Id. (i.e. read Cortex-M ICSR[5:0] = active vector) - #endif - #else - #define SEGGER_SYSVIEW_GET_INTERRUPT_ID() SEGGER_SYSVIEW_X_GetInterruptId() // Get the currently active interrupt Id from the user-provided function. - #endif -#endif - -/********************************************************************* -* -* Define: SEGGER_SYSVIEW_GET_TIMESTAMP() -* -* Description -* Function macro to retrieve a system timestamp for SYSVIEW events. -* Default -* Call user-supplied function SEGGER_SYSVIEW_X_GetTimestamp(). -* Notes -* For some known compilers and cores, a ready-to-use, core-specific -* default is set. -* ARMv7M: Read Cortex-M Cycle Count register. -* -* The system timestamp clock frequency has to be passed in -* SEGGER_SYSVIEW_Init(). -*/ -#ifndef SEGGER_SYSVIEW_GET_TIMESTAMP - #if defined (SEGGER_SYSVIEW_CORE) && (SEGGER_SYSVIEW_CORE == SEGGER_SYSVIEW_CORE_CM3) - #define SEGGER_SYSVIEW_GET_TIMESTAMP() svc_get_dwt_cyccnt() // Retrieve a system timestamp. Cortex-M cycle counter. - #else - #define SEGGER_SYSVIEW_GET_TIMESTAMP() SEGGER_SYSVIEW_X_GetTimestamp() // Retrieve a system timestamp via user-defined function - #endif -#endif - -/********************************************************************* -* -* Define: SEGGER_SYSVIEW_TIMESTAMP_BITS -* -* Description -* Number of valid (low-order) bits delivered in system timestamp. -* Default -* 32 -* Notes -* Value has to match system timestamp clock source. -*/ -// Define number of valid bits low-order delivered by clock source. -#ifndef SEGGER_SYSVIEW_TIMESTAMP_BITS - #define SEGGER_SYSVIEW_TIMESTAMP_BITS 32 -#endif - -/********************************************************************* -* -* Define: SEGGER_SYSVIEW_RTT_CHANNEL -* -* Description -* The RTT channel that SystemView will use. -* Default -* 0: Auto selection. -* Notes -* Value has to be lower than SEGGER_RTT_MAX_NUM_UP_BUFFERS. -*/ -#ifndef SEGGER_SYSVIEW_RTT_CHANNEL - #define SEGGER_SYSVIEW_RTT_CHANNEL 0 -#endif -// Sanity check of RTT channel -#if (SEGGER_SYSVIEW_RTT_CHANNEL == 0) && (SEGGER_RTT_MAX_NUM_UP_BUFFERS < 2) - #error "SEGGER_RTT_MAX_NUM_UP_BUFFERS in SEGGER_RTT_Conf.h has to be > 1!" -#elif (SEGGER_SYSVIEW_RTT_CHANNEL >= SEGGER_RTT_MAX_NUM_UP_BUFFERS) - #error "SEGGER_RTT_MAX_NUM_UP_BUFFERS in SEGGER_RTT_Conf.h has to be > SEGGER_SYSVIEW_RTT_CHANNEL!" -#endif - -/********************************************************************* -* -* Define: SEGGER_SYSVIEW_RTT_BUFFER_SIZE -* -* Description -* Number of bytes that SystemView uses for the RTT buffer. -* Default -* 1024 -*/ -#ifndef SEGGER_SYSVIEW_RTT_BUFFER_SIZE - #define SEGGER_SYSVIEW_RTT_BUFFER_SIZE 4096 -#endif - -/********************************************************************* -* -* Define: SEGGER_SYSVIEW_SECTION -* -* Description -* Section to place the SystemView RTT Buffer into. -* Default -* undefined: Do not place into a specific section. -* Notes -* If SEGGER_RTT_SECTION is defined, the default changes to use -* this section for the SystemView RTT Buffer, too. -*/ -#if !(defined SEGGER_SYSVIEW_SECTION) && (defined SEGGER_RTT_SECTION) - #define SEGGER_SYSVIEW_SECTION SEGGER_RTT_SECTION -#endif - -/********************************************************************* -* -* Define: SEGGER_SYSVIEW_CPU_CACHE_LINE_SIZE -* -* Description -* Largest cache line size (in bytes) in the target system. -* Default -* 0 -* Notes -* Required in systems with caches to make sure that the SystemView -* RTT buffer can be aligned accordingly. -*/ -#ifndef SEGGER_SYSVIEW_CPU_CACHE_LINE_SIZE - #define SEGGER_SYSVIEW_CPU_CACHE_LINE_SIZE 0 -#endif - -/********************************************************************* -* -* Define: SEGGER_SYSVIEW_ID_BASE -* -* Description -* Lowest Id reported by the application. -* Default -* 0 -* Notes -* Value is usually subtracted from mailboxes, semaphores, tasks, -* .... addresses, to compress event parameters. -* Should be the lowest RAM address of the system. -*/ -#ifndef SEGGER_SYSVIEW_ID_BASE - #define SEGGER_SYSVIEW_ID_BASE 0 -#endif - -/********************************************************************* -* -* Define: SEGGER_SYSVIEW_ID_SHIFT -* -* Description -* Number of bits to shift Ids. -* Default -* 0 -* Notes -* Ids are shifted to compress event parameters. -* Should match the alignment of Ids (addresses), -* e.g. 2 when Ids are 4 byte aligned. -*/ -#ifndef SEGGER_SYSVIEW_ID_SHIFT - #define SEGGER_SYSVIEW_ID_SHIFT 0 -#endif - -/********************************************************************* -* -* Define: SEGGER_SYSVIEW_MAX_ARGUMENTS -* -* Description -* Maximum number of arguments which are handled with SystemView -* print routines or may be encoded in one recording function. -* routines. -* Default -* 16 -*/ -#ifndef SEGGER_SYSVIEW_MAX_ARGUMENTS - #define SEGGER_SYSVIEW_MAX_ARGUMENTS 16 -#endif - -/********************************************************************* -* -* Define: SEGGER_SYSVIEW_MAX_STRING_LEN -* -* Description -* Maximum string length which can be used in SystemView print and -* system description routines. -* Default -* 128 -*/ -#ifndef SEGGER_SYSVIEW_MAX_STRING_LEN - #define SEGGER_SYSVIEW_MAX_STRING_LEN 1024 -#endif - -/********************************************************************* -* -* Define: SEGGER_SYSVIEW_PRINTF_IMPLICIT_FORMAT -* -* Description -* If enabled, on SEGGER_SYSVIEW_PrintHost, check the format string -* and if it includes unsupported formatters, use formatting on the -* target instead. -* Default -* 0: Disabled. -*/ -#ifndef SEGGER_SYSVIEW_PRINTF_IMPLICIT_FORMAT - #define SEGGER_SYSVIEW_PRINTF_IMPLICIT_FORMAT 0 -#endif - -/********************************************************************* -* -* Define: SEGGER_SYSVIEW_USE_INTERNAL_RECORDER -* -* Description -* If set, an internal recorder, such as UART or IP is used. -* Default -* 0: Disabled. -* Notes -* Convenience define to be used by SEGGER_SYSVIEW_Conf(), -* such as in embOS configuration to enable Cortex-M cycle counter. -*/ -#ifndef SEGGER_SYSVIEW_USE_INTERNAL_RECORDER - #define SEGGER_SYSVIEW_USE_INTERNAL_RECORDER 0 -#endif - -/********************************************************************* -* -* Define: SEGGER_SYSVIEW_CAN_RESTART -* -* Description -* If enabled, send the SystemView start sequence on every start -* command, not just on the first one. -* Enables restart when SystemView disconnected unexpectedly. -* Default -* 1: Enabled -*/ -#ifndef SEGGER_SYSVIEW_CAN_RESTART - #define SEGGER_SYSVIEW_CAN_RESTART 1 -#endif - -/********************************************************************* -* -* Define: SEGGER_SYSVIEW_START_ON_INIT -* -* Description -* Enable calling SEGGER_SYSVIEW_Start() after initialization. -* Default -* 0: Disabled. -* Notes -* Convenience define to be used by SEGGER_SYSVIEW_Conf(), -* such as in embOS configuration. -*/ -#ifndef SEGGER_SYSVIEW_START_ON_INIT - #define SEGGER_SYSVIEW_START_ON_INIT 0 -#endif - -/********************************************************************* -* -* Define: SEGGER_SYSVIEW_USE_STATIC_BUFFER -* -* Description -* If enabled, use a static buffer instead of a buffer on the stack -* for SystemView event packets. -* Default -* 1: Enabled. -* Notes -* If enabled, the static memory use by SystemView is increased by -* the maximum packet size. SystemView is locked on entry of a -* recording function. -* If disabled, the stack usage by SystemView recording functions -* might be increased by up to the maximum packet size. SystemView -* is locked when writing the packet to the RTT buffer. -*/ -#ifndef SEGGER_SYSVIEW_USE_STATIC_BUFFER - #define SEGGER_SYSVIEW_USE_STATIC_BUFFER 1 -#endif - -/********************************************************************* -* -* Define: SEGGER_SYSVIEW_MAX_PACKET_SIZE -* -* Description -* Maximum packet size for a SystemView event. -* Default -* Automatically calculated. -* Notes -* The maximum packet size is mainly defined by the maximum string -* length and the maximum number of arguments. -*/ -#ifndef SEGGER_SYSVIEW_MAX_PACKET_SIZE - #define SEGGER_SYSVIEW_MAX_PACKET_SIZE (SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_MAX_STRING_LEN + 2 * SEGGER_SYSVIEW_QUANTA_U32 + SEGGER_SYSVIEW_MAX_ARGUMENTS * SEGGER_SYSVIEW_QUANTA_U32) -#endif - -/********************************************************************* -* -* Define: SEGGER_SYSVIEW_POST_MORTEM_MODE -* -* Description -* If enabled, SystemView records for post-mortem analysis instead -* of real-time analysis. -* Default -* 0: Disabled. -* Notes -* For more information refer to -* https://www.segger.com/products/development-tools/systemview/technology/post-mortem-mode -*/ -#ifndef SEGGER_SYSVIEW_POST_MORTEM_MODE - #define SEGGER_SYSVIEW_POST_MORTEM_MODE 0 -#endif - -/********************************************************************* -* -* Define: SEGGER_SYSVIEW_SYNC_PERIOD_SHIFT -* -* Description -* Configure how frequently syncronization is sent in post-mortem -* mode. -* Default -* 8: (1 << 8) = Every 256 Events. -* Notes -* In post-mortem mode, at least one sync has to be in the RTT buffer. -* Recommended sync frequency: Buffer Size / 16 -* For more information refer to -* https://www.segger.com/products/development-tools/systemview/technology/post-mortem-mode -*/ -#ifndef SEGGER_SYSVIEW_SYNC_PERIOD_SHIFT - #define SEGGER_SYSVIEW_SYNC_PERIOD_SHIFT 8 -#endif - -/********************************************************************* -* -* Define: SEGGER_SYSVIEW_ON_EVENT_RECORDED() -* -* Description -* Function macro to notify recorder about a new event in buffer. -* Default -* undefined: Do not notify recorder. -* Notes -* Used for non-J-Link recorder, -* such as to enable transmission via UART or notify IP task. -*/ -#ifndef SEGGER_SYSVIEW_ON_EVENT_RECORDED - #define SEGGER_SYSVIEW_ON_EVENT_RECORDED(NumBytes) -#endif - -/********************************************************************* -* -* Define: SEGGER_SYSVIEW_LOCK() -* -* Description -* Function macro to (nestable) lock SystemView recording. -* Default -* Use RTT Locking mechanism (defined by SEGGER_RTT_LOCK()). -* Notes -* If SystemView recording is not locked, recording events from -* interrupts and tasks may lead to unpredictable, undefined, event -* data. -*/ -#ifndef SEGGER_SYSVIEW_LOCK - #define SEGGER_SYSVIEW_LOCK() SEGGER_RTT_LOCK() -#endif - -/********************************************************************* -* -* Define: SEGGER_SYSVIEW_UNLOCK -* -* Description -* Function macro to unlock SystemView recording. -* Default -* Use RTT Unlocking mechanism (defined by SEGGER_RTT_UNLOCK()). -*/ -#ifndef SEGGER_SYSVIEW_UNLOCK - #define SEGGER_SYSVIEW_UNLOCK() SEGGER_RTT_UNLOCK() -#endif - -#ifdef __cplusplus -} -#endif - -#endif - -/*************************** End of file ****************************/ +/********************************************************************* +* SEGGER Microcontroller GmbH * +* The Embedded Experts * +********************************************************************** +* * +* (c) 1995 - 2019 SEGGER Microcontroller GmbH * +* * +* www.segger.com Support: support@segger.com * +* * +********************************************************************** +* * +* SEGGER SystemView * Real-time application analysis * +* * +********************************************************************** +* * +* All rights reserved. * +* * +* SEGGER strongly recommends to not make any changes * +* to or modify the source code of this software in order to stay * +* compatible with the SystemView and RTT protocol, and J-Link. * +* * +* Redistribution and use in source and binary forms, with or * +* without modification, are permitted provided that the following * +* condition is met: * +* * +* o Redistributions of source code must retain the above copyright * +* notice, this condition and the following disclaimer. * +* * +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND * +* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * +* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * +* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * +* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR * +* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * +* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * +* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * +* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * +* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE * +* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH * +* DAMAGE. * +* * +********************************************************************** +* * +* SystemView version: 3.20 * +* * +********************************************************************** +-------------------------- END-OF-HEADER ----------------------------- +File : SEGGER_SYSVIEW_ConfDefaults.h +Purpose : Defines defaults for configurable defines used in + SEGGER SystemView. +Revision: $Rev: 21319 $ +*/ + +#ifndef SEGGER_SYSVIEW_CONFDEFAULTS_H +#define SEGGER_SYSVIEW_CONFDEFAULTS_H + +/********************************************************************* +* +* #include Section +* +********************************************************************** +*/ + +#include "SEGGER_SYSVIEW_Conf.h" +#include "SEGGER_RTT_Conf.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#include +extern uint32_t svc_get_dwt_cyccnt(); + + +/********************************************************************* +* +* Defines, fixed +* +********************************************************************** +*/ +// +// Use auto-detection for SEGGER_SYSVIEW_CORE define +// based on compiler-/toolchain-specific defines +// to define SEGGER_SYSVIEW_GET_INTERRUPT_ID and SEGGER_SYSVIEW_GET_TIMESTAMP +// +#define SEGGER_SYSVIEW_CORE_OTHER 0 +#define SEGGER_SYSVIEW_CORE_CM0 1 // Cortex-M0/M0+/M1 +#define SEGGER_SYSVIEW_CORE_CM3 2 // Cortex-M3/M4/M7 +#define SEGGER_SYSVIEW_CORE_RX 3 // Renesas RX +#ifndef SEGGER_SYSVIEW_CORE + #if (defined __SES_ARM) || (defined __CROSSWORKS_ARM) || (defined __SEGGER_CC__) || (defined __GNUC__) || (defined __clang__) + #if (defined __ARM_ARCH_6M__) || (defined __ARM_ARCH_8M_BASE__) + #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM0 + #elif (defined(__ARM_ARCH_7M__) || defined(__ARM_ARCH_7EM__) || defined(__ARM_ARCH_8M_MAIN__)) + #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM3 + #endif + #elif defined(__ICCARM__) + #if (defined (__ARM6M__) && (__CORE__ == __ARM6M__)) \ + || (defined (__ARM8M_BASELINE__) && (__CORE__ == __ARM8M_BASELINE__)) + #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM0 + #elif (defined (__ARM7EM__) && (__CORE__ == __ARM7EM__)) \ + || (defined (__ARM7M__) && (__CORE__ == __ARM7M__)) \ + || (defined (__ARM8M_MAINLINE__) && (__CORE__ == __ARM8M_MAINLINE__)) \ + || (defined (__ARM8M_MAINLINE__) && (__CORE__ == __ARM8M_MAINLINE__)) + #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM3 + #endif + #elif defined(__CC_ARM) + #if (defined(__TARGET_ARCH_6S_M)) + #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM0 + #elif (defined(__TARGET_ARCH_7_M) || defined(__TARGET_ARCH_7E_M)) + #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM3 + #endif + #elif defined(__TI_ARM__) + #ifdef __TI_ARM_V6M0__ + #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM0 + #elif (defined(__TI_ARM_V7M3__) || defined(__TI_ARM_V7M4__)) + #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM3 + #endif + #elif defined(__ICCRX__) + #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_RX + #elif defined(__RX) + #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_RX + #endif + + #ifndef SEGGER_SYSVIEW_CORE + #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_OTHER + #endif +#endif + + +/********************************************************************* +* +* Defines, defaults +* +********************************************************************** +*/ +/********************************************************************* +* +* Define: SEGGER_SYSVIEW_APP_NAME +* +* Description +* The application name to be displayed in SystemView. +* Default +* "SystemView-enabled Application" +* Notes +* Convenience define to be used for SEGGER_SYSVIEW_SendSysDesc(). +*/ +#ifndef SEGGER_SYSVIEW_APP_NAME + #define SEGGER_SYSVIEW_APP_NAME "SystemView-enabled Application" +#endif + +/********************************************************************* +* +* Define: SEGGER_SYSVIEW_DEVICE_NAME +* +* Description +* The target device name to be displayed in SystemView. +* Default +* "undefined device" +* Notes +* Convenience define to be used for SEGGER_SYSVIEW_SendSysDesc(). +*/ +#ifndef SEGGER_SYSVIEW_DEVICE_NAME + #define SEGGER_SYSVIEW_DEVICE_NAME "undefined device" +#endif + +/********************************************************************* +* +* Define: SEGGER_SYSVIEW_GET_INTERRUPT_ID() +* +* Description +* Function macro to retrieve the Id of the currently active +* interrupt. +* Default +* Call user-supplied function SEGGER_SYSVIEW_X_GetInterruptId(). +* Notes +* For some known compilers and cores, a ready-to-use, core-specific +* default is set. +* ARMv7M: Read ICSR[8:0] (active vector) +* ARMv6M: Read ICSR[5:0] (active vector) +*/ +#ifndef SEGGER_SYSVIEW_GET_INTERRUPT_ID + #if SEGGER_SYSVIEW_CORE == SEGGER_SYSVIEW_CORE_CM3 + #define SEGGER_SYSVIEW_GET_INTERRUPT_ID() ((*(U32*)(0xE000ED04)) & 0x1FF) // Get the currently active interrupt Id. (i.e. read Cortex-M ICSR[8:0] = active vector) + #elif SEGGER_SYSVIEW_CORE == SEGGER_SYSVIEW_CORE_CM0 + #if defined(__ICCARM__) + #if (__VER__ > 6010000) + #define SEGGER_SYSVIEW_GET_INTERRUPT_ID() (__get_IPSR()) // Workaround for IAR, which might do a byte-access to 0xE000ED04. Read IPSR instead. + #else + #define SEGGER_SYSVIEW_GET_INTERRUPT_ID() ((*(U32*)(0xE000ED04)) & 0x3F) // Older versions of IAR do not include __get_IPSR, but might also not optimize to byte-access. + #endif + #else + #define SEGGER_SYSVIEW_GET_INTERRUPT_ID() ((*(U32*)(0xE000ED04)) & 0x3F) // Get the currently active interrupt Id. (i.e. read Cortex-M ICSR[5:0] = active vector) + #endif + #else + #define SEGGER_SYSVIEW_GET_INTERRUPT_ID() SEGGER_SYSVIEW_X_GetInterruptId() // Get the currently active interrupt Id from the user-provided function. + #endif +#endif + +/********************************************************************* +* +* Define: SEGGER_SYSVIEW_GET_TIMESTAMP() +* +* Description +* Function macro to retrieve a system timestamp for SYSVIEW events. +* Default +* Call user-supplied function SEGGER_SYSVIEW_X_GetTimestamp(). +* Notes +* For some known compilers and cores, a ready-to-use, core-specific +* default is set. +* ARMv7M: Read Cortex-M Cycle Count register. +* +* The system timestamp clock frequency has to be passed in +* SEGGER_SYSVIEW_Init(). +*/ +#ifndef SEGGER_SYSVIEW_GET_TIMESTAMP + #if defined (SEGGER_SYSVIEW_CORE) && (SEGGER_SYSVIEW_CORE == SEGGER_SYSVIEW_CORE_CM3) + #define SEGGER_SYSVIEW_GET_TIMESTAMP() svc_get_dwt_cyccnt() // Retrieve a system timestamp. Cortex-M cycle counter. + #else + #define SEGGER_SYSVIEW_GET_TIMESTAMP() SEGGER_SYSVIEW_X_GetTimestamp() // Retrieve a system timestamp via user-defined function + #endif +#endif + +/********************************************************************* +* +* Define: SEGGER_SYSVIEW_TIMESTAMP_BITS +* +* Description +* Number of valid (low-order) bits delivered in system timestamp. +* Default +* 32 +* Notes +* Value has to match system timestamp clock source. +*/ +// Define number of valid bits low-order delivered by clock source. +#ifndef SEGGER_SYSVIEW_TIMESTAMP_BITS + #define SEGGER_SYSVIEW_TIMESTAMP_BITS 32 +#endif + +/********************************************************************* +* +* Define: SEGGER_SYSVIEW_RTT_CHANNEL +* +* Description +* The RTT channel that SystemView will use. +* Default +* 0: Auto selection. +* Notes +* Value has to be lower than SEGGER_RTT_MAX_NUM_UP_BUFFERS. +*/ +#ifndef SEGGER_SYSVIEW_RTT_CHANNEL + #define SEGGER_SYSVIEW_RTT_CHANNEL 0 +#endif +// Sanity check of RTT channel +#if (SEGGER_SYSVIEW_RTT_CHANNEL == 0) && (SEGGER_RTT_MAX_NUM_UP_BUFFERS < 2) + #error "SEGGER_RTT_MAX_NUM_UP_BUFFERS in SEGGER_RTT_Conf.h has to be > 1!" +#elif (SEGGER_SYSVIEW_RTT_CHANNEL >= SEGGER_RTT_MAX_NUM_UP_BUFFERS) + #error "SEGGER_RTT_MAX_NUM_UP_BUFFERS in SEGGER_RTT_Conf.h has to be > SEGGER_SYSVIEW_RTT_CHANNEL!" +#endif + +/********************************************************************* +* +* Define: SEGGER_SYSVIEW_RTT_BUFFER_SIZE +* +* Description +* Number of bytes that SystemView uses for the RTT buffer. +* Default +* 1024 +*/ +#ifndef SEGGER_SYSVIEW_RTT_BUFFER_SIZE + #define SEGGER_SYSVIEW_RTT_BUFFER_SIZE 4096 +#endif + +/********************************************************************* +* +* Define: SEGGER_SYSVIEW_SECTION +* +* Description +* Section to place the SystemView RTT Buffer into. +* Default +* undefined: Do not place into a specific section. +* Notes +* If SEGGER_RTT_SECTION is defined, the default changes to use +* this section for the SystemView RTT Buffer, too. +*/ +#if !(defined SEGGER_SYSVIEW_SECTION) && (defined SEGGER_RTT_SECTION) + #define SEGGER_SYSVIEW_SECTION SEGGER_RTT_SECTION +#endif + +/********************************************************************* +* +* Define: SEGGER_SYSVIEW_CPU_CACHE_LINE_SIZE +* +* Description +* Largest cache line size (in bytes) in the target system. +* Default +* 0 +* Notes +* Required in systems with caches to make sure that the SystemView +* RTT buffer can be aligned accordingly. +*/ +#ifndef SEGGER_SYSVIEW_CPU_CACHE_LINE_SIZE + #define SEGGER_SYSVIEW_CPU_CACHE_LINE_SIZE 0 +#endif + +/********************************************************************* +* +* Define: SEGGER_SYSVIEW_ID_BASE +* +* Description +* Lowest Id reported by the application. +* Default +* 0 +* Notes +* Value is usually subtracted from mailboxes, semaphores, tasks, +* .... addresses, to compress event parameters. +* Should be the lowest RAM address of the system. +*/ +#ifndef SEGGER_SYSVIEW_ID_BASE + #define SEGGER_SYSVIEW_ID_BASE 0 +#endif + +/********************************************************************* +* +* Define: SEGGER_SYSVIEW_ID_SHIFT +* +* Description +* Number of bits to shift Ids. +* Default +* 0 +* Notes +* Ids are shifted to compress event parameters. +* Should match the alignment of Ids (addresses), +* e.g. 2 when Ids are 4 byte aligned. +*/ +#ifndef SEGGER_SYSVIEW_ID_SHIFT + #define SEGGER_SYSVIEW_ID_SHIFT 0 +#endif + +/********************************************************************* +* +* Define: SEGGER_SYSVIEW_MAX_ARGUMENTS +* +* Description +* Maximum number of arguments which are handled with SystemView +* print routines or may be encoded in one recording function. +* routines. +* Default +* 16 +*/ +#ifndef SEGGER_SYSVIEW_MAX_ARGUMENTS + #define SEGGER_SYSVIEW_MAX_ARGUMENTS 16 +#endif + +/********************************************************************* +* +* Define: SEGGER_SYSVIEW_MAX_STRING_LEN +* +* Description +* Maximum string length which can be used in SystemView print and +* system description routines. +* Default +* 128 +*/ +#ifndef SEGGER_SYSVIEW_MAX_STRING_LEN + #define SEGGER_SYSVIEW_MAX_STRING_LEN 1024 +#endif + +/********************************************************************* +* +* Define: SEGGER_SYSVIEW_PRINTF_IMPLICIT_FORMAT +* +* Description +* If enabled, on SEGGER_SYSVIEW_PrintHost, check the format string +* and if it includes unsupported formatters, use formatting on the +* target instead. +* Default +* 0: Disabled. +*/ +#ifndef SEGGER_SYSVIEW_PRINTF_IMPLICIT_FORMAT + #define SEGGER_SYSVIEW_PRINTF_IMPLICIT_FORMAT 0 +#endif + +/********************************************************************* +* +* Define: SEGGER_SYSVIEW_USE_INTERNAL_RECORDER +* +* Description +* If set, an internal recorder, such as UART or IP is used. +* Default +* 0: Disabled. +* Notes +* Convenience define to be used by SEGGER_SYSVIEW_Conf(), +* such as in embOS configuration to enable Cortex-M cycle counter. +*/ +#ifndef SEGGER_SYSVIEW_USE_INTERNAL_RECORDER + #define SEGGER_SYSVIEW_USE_INTERNAL_RECORDER 0 +#endif + +/********************************************************************* +* +* Define: SEGGER_SYSVIEW_CAN_RESTART +* +* Description +* If enabled, send the SystemView start sequence on every start +* command, not just on the first one. +* Enables restart when SystemView disconnected unexpectedly. +* Default +* 1: Enabled +*/ +#ifndef SEGGER_SYSVIEW_CAN_RESTART + #define SEGGER_SYSVIEW_CAN_RESTART 1 +#endif + +/********************************************************************* +* +* Define: SEGGER_SYSVIEW_START_ON_INIT +* +* Description +* Enable calling SEGGER_SYSVIEW_Start() after initialization. +* Default +* 0: Disabled. +* Notes +* Convenience define to be used by SEGGER_SYSVIEW_Conf(), +* such as in embOS configuration. +*/ +#ifndef SEGGER_SYSVIEW_START_ON_INIT + #define SEGGER_SYSVIEW_START_ON_INIT 0 +#endif + +/********************************************************************* +* +* Define: SEGGER_SYSVIEW_USE_STATIC_BUFFER +* +* Description +* If enabled, use a static buffer instead of a buffer on the stack +* for SystemView event packets. +* Default +* 1: Enabled. +* Notes +* If enabled, the static memory use by SystemView is increased by +* the maximum packet size. SystemView is locked on entry of a +* recording function. +* If disabled, the stack usage by SystemView recording functions +* might be increased by up to the maximum packet size. SystemView +* is locked when writing the packet to the RTT buffer. +*/ +#ifndef SEGGER_SYSVIEW_USE_STATIC_BUFFER + #define SEGGER_SYSVIEW_USE_STATIC_BUFFER 1 +#endif + +/********************************************************************* +* +* Define: SEGGER_SYSVIEW_MAX_PACKET_SIZE +* +* Description +* Maximum packet size for a SystemView event. +* Default +* Automatically calculated. +* Notes +* The maximum packet size is mainly defined by the maximum string +* length and the maximum number of arguments. +*/ +#ifndef SEGGER_SYSVIEW_MAX_PACKET_SIZE + #define SEGGER_SYSVIEW_MAX_PACKET_SIZE (SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_MAX_STRING_LEN + 2 * SEGGER_SYSVIEW_QUANTA_U32 + SEGGER_SYSVIEW_MAX_ARGUMENTS * SEGGER_SYSVIEW_QUANTA_U32) +#endif + +/********************************************************************* +* +* Define: SEGGER_SYSVIEW_POST_MORTEM_MODE +* +* Description +* If enabled, SystemView records for post-mortem analysis instead +* of real-time analysis. +* Default +* 0: Disabled. +* Notes +* For more information refer to +* https://www.segger.com/products/development-tools/systemview/technology/post-mortem-mode +*/ +#ifndef SEGGER_SYSVIEW_POST_MORTEM_MODE + #define SEGGER_SYSVIEW_POST_MORTEM_MODE 0 +#endif + +/********************************************************************* +* +* Define: SEGGER_SYSVIEW_SYNC_PERIOD_SHIFT +* +* Description +* Configure how frequently syncronization is sent in post-mortem +* mode. +* Default +* 8: (1 << 8) = Every 256 Events. +* Notes +* In post-mortem mode, at least one sync has to be in the RTT buffer. +* Recommended sync frequency: Buffer Size / 16 +* For more information refer to +* https://www.segger.com/products/development-tools/systemview/technology/post-mortem-mode +*/ +#ifndef SEGGER_SYSVIEW_SYNC_PERIOD_SHIFT + #define SEGGER_SYSVIEW_SYNC_PERIOD_SHIFT 8 +#endif + +/********************************************************************* +* +* Define: SEGGER_SYSVIEW_ON_EVENT_RECORDED() +* +* Description +* Function macro to notify recorder about a new event in buffer. +* Default +* undefined: Do not notify recorder. +* Notes +* Used for non-J-Link recorder, +* such as to enable transmission via UART or notify IP task. +*/ +#ifndef SEGGER_SYSVIEW_ON_EVENT_RECORDED + #define SEGGER_SYSVIEW_ON_EVENT_RECORDED(NumBytes) +#endif + +/********************************************************************* +* +* Define: SEGGER_SYSVIEW_LOCK() +* +* Description +* Function macro to (nestable) lock SystemView recording. +* Default +* Use RTT Locking mechanism (defined by SEGGER_RTT_LOCK()). +* Notes +* If SystemView recording is not locked, recording events from +* interrupts and tasks may lead to unpredictable, undefined, event +* data. +*/ +#ifndef SEGGER_SYSVIEW_LOCK + #define SEGGER_SYSVIEW_LOCK() SEGGER_RTT_LOCK() +#endif + +/********************************************************************* +* +* Define: SEGGER_SYSVIEW_UNLOCK +* +* Description +* Function macro to unlock SystemView recording. +* Default +* Use RTT Unlocking mechanism (defined by SEGGER_RTT_UNLOCK()). +*/ +#ifndef SEGGER_SYSVIEW_UNLOCK + #define SEGGER_SYSVIEW_UNLOCK() SEGGER_RTT_UNLOCK() +#endif + +#ifdef __cplusplus +} +#endif + +#endif + +/*************************** End of file ****************************/ diff --git a/core/embed/segger/SEGGER/SEGGER_SYSVIEW_Config_NoOS.c b/core/embed/segger/SEGGER/SEGGER_SYSVIEW_Config_NoOS.c index 6845b1eb7f..0061f0a8ff 100644 --- a/core/embed/segger/SEGGER/SEGGER_SYSVIEW_Config_NoOS.c +++ b/core/embed/segger/SEGGER/SEGGER_SYSVIEW_Config_NoOS.c @@ -1,148 +1,148 @@ -/********************************************************************* -* SEGGER Microcontroller GmbH * -* The Embedded Experts * -********************************************************************** -* * -* (c) 1995 - 2019 SEGGER Microcontroller GmbH * -* * -* www.segger.com Support: support@segger.com * -* * -********************************************************************** -* * -* SEGGER SystemView * Real-time application analysis * -* * -********************************************************************** -* * -* All rights reserved. * -* * -* SEGGER strongly recommends to not make any changes * -* to or modify the source code of this software in order to stay * -* compatible with the SystemView and RTT protocol, and J-Link. * -* * -* Redistribution and use in source and binary forms, with or * -* without modification, are permitted provided that the following * -* condition is met: * -* * -* o Redistributions of source code must retain the above copyright * -* notice, this condition and the following disclaimer. * -* * -* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND * -* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * -* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * -* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * -* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR * -* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * -* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * -* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * -* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * -* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * -* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE * -* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH * -* DAMAGE. * -* * -********************************************************************** -* * -* SystemView version: 3.20 * -* * -********************************************************************** --------------------------- END-OF-HEADER ----------------------------- - -File : SEGGER_SYSVIEW_Config_NoOS.c -Purpose : Sample setup configuration of SystemView without an OS. -Revision: $Rev: 9599 $ -*/ -#include "SEGGER_SYSVIEW.h" -#include "SEGGER_SYSVIEW_Conf.h" - -// SystemcoreClock can be used in most CMSIS compatible projects. -// In non-CMSIS projects define SYSVIEW_CPU_FREQ. -extern unsigned int SystemCoreClock; - -/********************************************************************* -* -* Defines, configurable -* -********************************************************************** -*/ -// The application name to be displayed in SystemViewer -#define SYSVIEW_APP_NAME "Trezor Core" - -// The target device name -#define SYSVIEW_DEVICE_NAME "STM32F427VI" - -// Frequency of the timestamp. Must match SEGGER_SYSVIEW_Conf.h -#define SYSVIEW_TIMESTAMP_FREQ (SystemCoreClock) - -// System Frequency. SystemcoreClock is used in most CMSIS compatible projects. -#define SYSVIEW_CPU_FREQ (SystemCoreClock) - -// The lowest RAM address used for IDs (pointers) -#define SYSVIEW_RAM_BASE (0x10000000) - -// Define as 1 if the Cortex-M cycle counter is used as SystemView timestamp. Must match SEGGER_SYSVIEW_Conf.h -#ifndef USE_CYCCNT_TIMESTAMP - #define USE_CYCCNT_TIMESTAMP 1 -#endif - -// Define as 1 if the Cortex-M cycle counter is used and there might be no debugger attached while recording. -#ifndef ENABLE_DWT_CYCCNT - #define ENABLE_DWT_CYCCNT (USE_CYCCNT_TIMESTAMP & SEGGER_SYSVIEW_POST_MORTEM_MODE) -#endif - -/********************************************************************* -* -* Defines, fixed -* -********************************************************************** -*/ -#define DEMCR (*(volatile unsigned long*) (0xE000EDFCuL)) // Debug Exception and Monitor Control Register -#define TRACEENA_BIT (1uL << 24) // Trace enable bit -#define DWT_CTRL (*(volatile unsigned long*) (0xE0001000uL)) // DWT Control Register -#define NOCYCCNT_BIT (1uL << 25) // Cycle counter support bit -#define CYCCNTENA_BIT (1uL << 0) // Cycle counter enable bit - -/********************************************************************* -* -* _cbSendSystemDesc() -* -* Function description -* Sends SystemView description strings. -*/ -static void _cbSendSystemDesc(void) { - SEGGER_SYSVIEW_SendSysDesc("N="SYSVIEW_APP_NAME",D="SYSVIEW_DEVICE_NAME); - SEGGER_SYSVIEW_SendSysDesc("I#15=SysTick"); - SEGGER_SYSVIEW_SendSysDesc("I#93=USB_HS"); -} - -/********************************************************************* -* -* Global functions -* -********************************************************************** -*/ -void SEGGER_SYSVIEW_Conf(void) { -#if USE_CYCCNT_TIMESTAMP -#if ENABLE_DWT_CYCCNT - // - // If no debugger is connected, the DWT must be enabled by the application - // - if ((DEMCR & TRACEENA_BIT) == 0) { - DEMCR |= TRACEENA_BIT; - } -#endif - // - // The cycle counter must be activated in order - // to use time related functions. - // - if ((DWT_CTRL & NOCYCCNT_BIT) == 0) { // Cycle counter supported? - if ((DWT_CTRL & CYCCNTENA_BIT) == 0) { // Cycle counter not enabled? - DWT_CTRL |= CYCCNTENA_BIT; // Enable Cycle counter - } - } -#endif - SEGGER_SYSVIEW_Init(SYSVIEW_TIMESTAMP_FREQ, SYSVIEW_CPU_FREQ, - 0, _cbSendSystemDesc); - SEGGER_SYSVIEW_SetRAMBase(SYSVIEW_RAM_BASE); -} - -/*************************** End of file ****************************/ +/********************************************************************* +* SEGGER Microcontroller GmbH * +* The Embedded Experts * +********************************************************************** +* * +* (c) 1995 - 2019 SEGGER Microcontroller GmbH * +* * +* www.segger.com Support: support@segger.com * +* * +********************************************************************** +* * +* SEGGER SystemView * Real-time application analysis * +* * +********************************************************************** +* * +* All rights reserved. * +* * +* SEGGER strongly recommends to not make any changes * +* to or modify the source code of this software in order to stay * +* compatible with the SystemView and RTT protocol, and J-Link. * +* * +* Redistribution and use in source and binary forms, with or * +* without modification, are permitted provided that the following * +* condition is met: * +* * +* o Redistributions of source code must retain the above copyright * +* notice, this condition and the following disclaimer. * +* * +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND * +* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * +* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * +* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * +* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR * +* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * +* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * +* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * +* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * +* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE * +* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH * +* DAMAGE. * +* * +********************************************************************** +* * +* SystemView version: 3.20 * +* * +********************************************************************** +-------------------------- END-OF-HEADER ----------------------------- + +File : SEGGER_SYSVIEW_Config_NoOS.c +Purpose : Sample setup configuration of SystemView without an OS. +Revision: $Rev: 9599 $ +*/ +#include "SEGGER_SYSVIEW.h" +#include "SEGGER_SYSVIEW_Conf.h" + +// SystemcoreClock can be used in most CMSIS compatible projects. +// In non-CMSIS projects define SYSVIEW_CPU_FREQ. +extern unsigned int SystemCoreClock; + +/********************************************************************* +* +* Defines, configurable +* +********************************************************************** +*/ +// The application name to be displayed in SystemViewer +#define SYSVIEW_APP_NAME "Trezor Core" + +// The target device name +#define SYSVIEW_DEVICE_NAME "STM32F427VI" + +// Frequency of the timestamp. Must match SEGGER_SYSVIEW_Conf.h +#define SYSVIEW_TIMESTAMP_FREQ (SystemCoreClock) + +// System Frequency. SystemcoreClock is used in most CMSIS compatible projects. +#define SYSVIEW_CPU_FREQ (SystemCoreClock) + +// The lowest RAM address used for IDs (pointers) +#define SYSVIEW_RAM_BASE (0x10000000) + +// Define as 1 if the Cortex-M cycle counter is used as SystemView timestamp. Must match SEGGER_SYSVIEW_Conf.h +#ifndef USE_CYCCNT_TIMESTAMP + #define USE_CYCCNT_TIMESTAMP 1 +#endif + +// Define as 1 if the Cortex-M cycle counter is used and there might be no debugger attached while recording. +#ifndef ENABLE_DWT_CYCCNT + #define ENABLE_DWT_CYCCNT (USE_CYCCNT_TIMESTAMP & SEGGER_SYSVIEW_POST_MORTEM_MODE) +#endif + +/********************************************************************* +* +* Defines, fixed +* +********************************************************************** +*/ +#define DEMCR (*(volatile unsigned long*) (0xE000EDFCuL)) // Debug Exception and Monitor Control Register +#define TRACEENA_BIT (1uL << 24) // Trace enable bit +#define DWT_CTRL (*(volatile unsigned long*) (0xE0001000uL)) // DWT Control Register +#define NOCYCCNT_BIT (1uL << 25) // Cycle counter support bit +#define CYCCNTENA_BIT (1uL << 0) // Cycle counter enable bit + +/********************************************************************* +* +* _cbSendSystemDesc() +* +* Function description +* Sends SystemView description strings. +*/ +static void _cbSendSystemDesc(void) { + SEGGER_SYSVIEW_SendSysDesc("N="SYSVIEW_APP_NAME",D="SYSVIEW_DEVICE_NAME); + SEGGER_SYSVIEW_SendSysDesc("I#15=SysTick"); + SEGGER_SYSVIEW_SendSysDesc("I#93=USB_HS"); +} + +/********************************************************************* +* +* Global functions +* +********************************************************************** +*/ +void SEGGER_SYSVIEW_Conf(void) { +#if USE_CYCCNT_TIMESTAMP +#if ENABLE_DWT_CYCCNT + // + // If no debugger is connected, the DWT must be enabled by the application + // + if ((DEMCR & TRACEENA_BIT) == 0) { + DEMCR |= TRACEENA_BIT; + } +#endif + // + // The cycle counter must be activated in order + // to use time related functions. + // + if ((DWT_CTRL & NOCYCCNT_BIT) == 0) { // Cycle counter supported? + if ((DWT_CTRL & CYCCNTENA_BIT) == 0) { // Cycle counter not enabled? + DWT_CTRL |= CYCCNTENA_BIT; // Enable Cycle counter + } + } +#endif + SEGGER_SYSVIEW_Init(SYSVIEW_TIMESTAMP_FREQ, SYSVIEW_CPU_FREQ, + 0, _cbSendSystemDesc); + SEGGER_SYSVIEW_SetRAMBase(SYSVIEW_RAM_BASE); +} + +/*************************** End of file ****************************/ diff --git a/core/embed/segger/SEGGER/SEGGER_SYSVIEW_Int.h b/core/embed/segger/SEGGER/SEGGER_SYSVIEW_Int.h index 506ef78ef2..a07938155b 100644 --- a/core/embed/segger/SEGGER/SEGGER_SYSVIEW_Int.h +++ b/core/embed/segger/SEGGER/SEGGER_SYSVIEW_Int.h @@ -1,99 +1,99 @@ -/********************************************************************* -* SEGGER Microcontroller GmbH * -* The Embedded Experts * -********************************************************************** -* * -* (c) 1995 - 2019 SEGGER Microcontroller GmbH * -* * -* www.segger.com Support: support@segger.com * -* * -********************************************************************** -* * -* SEGGER SystemView * Real-time application analysis * -* * -********************************************************************** -* * -* All rights reserved. * -* * -* SEGGER strongly recommends to not make any changes * -* to or modify the source code of this software in order to stay * -* compatible with the SystemView and RTT protocol, and J-Link. * -* * -* Redistribution and use in source and binary forms, with or * -* without modification, are permitted provided that the following * -* condition is met: * -* * -* o Redistributions of source code must retain the above copyright * -* notice, this condition and the following disclaimer. * -* * -* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND * -* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * -* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * -* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * -* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR * -* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * -* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * -* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * -* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * -* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * -* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE * -* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH * -* DAMAGE. * -* * -********************************************************************** -* * -* SystemView version: 3.20 * -* * -********************************************************************** --------------------------- END-OF-HEADER ----------------------------- -File : SEGGER_SYSVIEW_Int.h -Purpose : SEGGER SystemView internal header. -Revision: $Rev: 21281 $ -*/ - -#ifndef SEGGER_SYSVIEW_INT_H -#define SEGGER_SYSVIEW_INT_H - -/********************************************************************* -* -* #include Section -* -********************************************************************** -*/ - -#include "SEGGER_SYSVIEW.h" - -#ifdef __cplusplus -extern "C" { -#endif - - -/********************************************************************* -* -* Private data types -* -********************************************************************** -*/ -// -// Commands that Host can send to target -// -typedef enum { - SEGGER_SYSVIEW_COMMAND_ID_START = 1, - SEGGER_SYSVIEW_COMMAND_ID_STOP, - SEGGER_SYSVIEW_COMMAND_ID_GET_SYSTIME, - SEGGER_SYSVIEW_COMMAND_ID_GET_TASKLIST, - SEGGER_SYSVIEW_COMMAND_ID_GET_SYSDESC, - SEGGER_SYSVIEW_COMMAND_ID_GET_NUMMODULES, - SEGGER_SYSVIEW_COMMAND_ID_GET_MODULEDESC, - SEGGER_SYSVIEW_COMMAND_ID_HEARTBEAT = 127, - // Extended commands: Commands >= 128 have a second parameter - SEGGER_SYSVIEW_COMMAND_ID_GET_MODULE = 128 -} SEGGER_SYSVIEW_COMMAND_ID; - -#ifdef __cplusplus -} -#endif - -#endif - -/*************************** End of file ****************************/ +/********************************************************************* +* SEGGER Microcontroller GmbH * +* The Embedded Experts * +********************************************************************** +* * +* (c) 1995 - 2019 SEGGER Microcontroller GmbH * +* * +* www.segger.com Support: support@segger.com * +* * +********************************************************************** +* * +* SEGGER SystemView * Real-time application analysis * +* * +********************************************************************** +* * +* All rights reserved. * +* * +* SEGGER strongly recommends to not make any changes * +* to or modify the source code of this software in order to stay * +* compatible with the SystemView and RTT protocol, and J-Link. * +* * +* Redistribution and use in source and binary forms, with or * +* without modification, are permitted provided that the following * +* condition is met: * +* * +* o Redistributions of source code must retain the above copyright * +* notice, this condition and the following disclaimer. * +* * +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND * +* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * +* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * +* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * +* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR * +* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * +* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * +* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * +* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * +* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE * +* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH * +* DAMAGE. * +* * +********************************************************************** +* * +* SystemView version: 3.20 * +* * +********************************************************************** +-------------------------- END-OF-HEADER ----------------------------- +File : SEGGER_SYSVIEW_Int.h +Purpose : SEGGER SystemView internal header. +Revision: $Rev: 21281 $ +*/ + +#ifndef SEGGER_SYSVIEW_INT_H +#define SEGGER_SYSVIEW_INT_H + +/********************************************************************* +* +* #include Section +* +********************************************************************** +*/ + +#include "SEGGER_SYSVIEW.h" + +#ifdef __cplusplus +extern "C" { +#endif + + +/********************************************************************* +* +* Private data types +* +********************************************************************** +*/ +// +// Commands that Host can send to target +// +typedef enum { + SEGGER_SYSVIEW_COMMAND_ID_START = 1, + SEGGER_SYSVIEW_COMMAND_ID_STOP, + SEGGER_SYSVIEW_COMMAND_ID_GET_SYSTIME, + SEGGER_SYSVIEW_COMMAND_ID_GET_TASKLIST, + SEGGER_SYSVIEW_COMMAND_ID_GET_SYSDESC, + SEGGER_SYSVIEW_COMMAND_ID_GET_NUMMODULES, + SEGGER_SYSVIEW_COMMAND_ID_GET_MODULEDESC, + SEGGER_SYSVIEW_COMMAND_ID_HEARTBEAT = 127, + // Extended commands: Commands >= 128 have a second parameter + SEGGER_SYSVIEW_COMMAND_ID_GET_MODULE = 128 +} SEGGER_SYSVIEW_COMMAND_ID; + +#ifdef __cplusplus +} +#endif + +#endif + +/*************************** End of file ****************************/ diff --git a/core/embed/segger/SEGGER/Syscalls/SEGGER_RTT_Syscalls_GCC.c b/core/embed/segger/SEGGER/Syscalls/SEGGER_RTT_Syscalls_GCC.c index f6ec3588c4..88870e39c9 100644 --- a/core/embed/segger/SEGGER/Syscalls/SEGGER_RTT_Syscalls_GCC.c +++ b/core/embed/segger/SEGGER/Syscalls/SEGGER_RTT_Syscalls_GCC.c @@ -1,124 +1,124 @@ -/********************************************************************* -* SEGGER Microcontroller GmbH * -* The Embedded Experts * -********************************************************************** -* * -* (c) 1995 - 2019 SEGGER Microcontroller GmbH * -* * -* www.segger.com Support: support@segger.com * -* * -********************************************************************** -* * -* SEGGER SystemView * Real-time application analysis * -* * -********************************************************************** -* * -* All rights reserved. * -* * -* SEGGER strongly recommends to not make any changes * -* to or modify the source code of this software in order to stay * -* compatible with the SystemView and RTT protocol, and J-Link. * -* * -* Redistribution and use in source and binary forms, with or * -* without modification, are permitted provided that the following * -* condition is met: * -* * -* o Redistributions of source code must retain the above copyright * -* notice, this condition and the following disclaimer. * -* * -* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND * -* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * -* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * -* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * -* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR * -* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * -* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * -* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * -* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * -* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * -* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE * -* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH * -* DAMAGE. * -* * -********************************************************************** -* * -* SystemView version: 3.20 * -* * -********************************************************************** ----------------------------END-OF-HEADER------------------------------ -File : SEGGER_RTT_Syscalls_GCC.c -Purpose : Low-level functions for using printf() via RTT in GCC. - To use RTT for printf output, include this file in your - application. -Revision: $Rev: 20755 $ ----------------------------------------------------------------------- -*/ -#if (defined __GNUC__) && !(defined __SES_ARM) && !(defined __CROSSWORKS_ARM) && !(defined __ARMCC_VERSION) && !(defined __CC_ARM) - -#include // required for _write_r -#include "SEGGER_RTT.h" - - -/********************************************************************* -* -* Types -* -********************************************************************** -*/ -// -// If necessary define the _reent struct -// to match the one passed by the used standard library. -// -struct _reent; - -/********************************************************************* -* -* Function prototypes -* -********************************************************************** -*/ -_ssize_t _write (int file, const void *ptr, size_t len); -_ssize_t _write_r(struct _reent *r, int file, const void *ptr, size_t len); - -/********************************************************************* -* -* Global functions -* -********************************************************************** -*/ - -/********************************************************************* -* -* _write() -* -* Function description -* Low-level write function. -* libc subroutines will use this system routine for output to all files, -* including stdout. -* Write data via RTT. -*/ -_ssize_t _write(int file, const void *ptr, size_t len) { - (void) file; /* Not used, avoid warning */ - SEGGER_RTT_Write(0, ptr, len); - return len; -} - -/********************************************************************* -* -* _write_r() -* -* Function description -* Low-level reentrant write function. -* libc subroutines will use this system routine for output to all files, -* including stdout. -* Write data via RTT. -*/ -_ssize_t _write_r(struct _reent *r, int file, const void *ptr, size_t len) { - (void) file; /* Not used, avoid warning */ - (void) r; /* Not used, avoid warning */ - SEGGER_RTT_Write(0, ptr, len); - return len; -} - -#endif -/****** End Of File *************************************************/ +/********************************************************************* +* SEGGER Microcontroller GmbH * +* The Embedded Experts * +********************************************************************** +* * +* (c) 1995 - 2019 SEGGER Microcontroller GmbH * +* * +* www.segger.com Support: support@segger.com * +* * +********************************************************************** +* * +* SEGGER SystemView * Real-time application analysis * +* * +********************************************************************** +* * +* All rights reserved. * +* * +* SEGGER strongly recommends to not make any changes * +* to or modify the source code of this software in order to stay * +* compatible with the SystemView and RTT protocol, and J-Link. * +* * +* Redistribution and use in source and binary forms, with or * +* without modification, are permitted provided that the following * +* condition is met: * +* * +* o Redistributions of source code must retain the above copyright * +* notice, this condition and the following disclaimer. * +* * +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND * +* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * +* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * +* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * +* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR * +* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * +* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * +* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * +* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * +* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE * +* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH * +* DAMAGE. * +* * +********************************************************************** +* * +* SystemView version: 3.20 * +* * +********************************************************************** +---------------------------END-OF-HEADER------------------------------ +File : SEGGER_RTT_Syscalls_GCC.c +Purpose : Low-level functions for using printf() via RTT in GCC. + To use RTT for printf output, include this file in your + application. +Revision: $Rev: 20755 $ +---------------------------------------------------------------------- +*/ +#if (defined __GNUC__) && !(defined __SES_ARM) && !(defined __CROSSWORKS_ARM) && !(defined __ARMCC_VERSION) && !(defined __CC_ARM) + +#include // required for _write_r +#include "SEGGER_RTT.h" + + +/********************************************************************* +* +* Types +* +********************************************************************** +*/ +// +// If necessary define the _reent struct +// to match the one passed by the used standard library. +// +struct _reent; + +/********************************************************************* +* +* Function prototypes +* +********************************************************************** +*/ +_ssize_t _write (int file, const void *ptr, size_t len); +_ssize_t _write_r(struct _reent *r, int file, const void *ptr, size_t len); + +/********************************************************************* +* +* Global functions +* +********************************************************************** +*/ + +/********************************************************************* +* +* _write() +* +* Function description +* Low-level write function. +* libc subroutines will use this system routine for output to all files, +* including stdout. +* Write data via RTT. +*/ +_ssize_t _write(int file, const void *ptr, size_t len) { + (void) file; /* Not used, avoid warning */ + SEGGER_RTT_Write(0, ptr, len); + return len; +} + +/********************************************************************* +* +* _write_r() +* +* Function description +* Low-level reentrant write function. +* libc subroutines will use this system routine for output to all files, +* including stdout. +* Write data via RTT. +*/ +_ssize_t _write_r(struct _reent *r, int file, const void *ptr, size_t len) { + (void) file; /* Not used, avoid warning */ + (void) r; /* Not used, avoid warning */ + SEGGER_RTT_Write(0, ptr, len); + return len; +} + +#endif +/****** End Of File *************************************************/