simplesshd/NOTES

BUILD INSTRUCTIONS:


To build this without my private keys, you'll need to replace my
ant.properties symlink with an empty file.  You'll have to build a
"debug" apk instead of a "release" one.  Android will not let you install
a debug apk on top of a release one, so you have to remove stock
SimpleSSHD first before installing the debug build.

Then follow the steps in the "doit" script (you will need to change the
last line to indicate how you install the app on your phone or emulator).

The mv steps in "doit" are very important, because ant will only package
the necessary binaries if they have a .so extension (even though they are
stand alone executables).



DEVELOPMENT JOURNAL:


December 6, 2014.

The idea is to make a proper ssh implementation for Android.  Important
features:

   * it should run happily without root (on a non-root port)

   * it should be a regular android app requiring no special permissions,
     and not requiring any 'magic' executable files

   * should not rely on busybox

   * preferably support sftp

   * open source

The existing apps are either expensive, don't work, need root, or too
complicated, or a mix of all of the above.  And none of them are open
source.

I figure I'll start with dropbear, which I will run through JNI instead
of putting it in its own binary (because making such a binary executable
is a bit of a hack).

So that's the plan........


December 14, 2014.

I got dropbear to compile under the Android NDK, so now it's time to work
on the Android side of it.

I need:
  * a Service that can be started, stopped, and queried for whether it's
    running or not
  * a Thread to implement the Service's work (by calling into dropbear's
    main()), which can also be stopped.
  * a config UI with at least these choices:
    - bool: start on boot (def: false)
    - number: port number (def: 2222)
    - string: path to authorized_keys file (def: /sdcard/ssh)
    - string: name of default shell (def: /system/bin/sh -l)
    - string: default path for HOME (def: /sdcard/ssh)
    - button: start or (if it's running) stop


December 15, 2014.

Getting to the fun part.  Process management...

To start sshd, it seems like I can startService().  Then in the Service's
onStartCommand(), call startForeground() so it won't be killed (return
START_STICKY too?).

The question is if dropbear's main() should run under a separate Thread,
or a separate Process.  The trouble with a Thread is that it might be
hard to kill.  The trouble with a process is that there is no way to
report back status (such as a failure to start sshd).

Connectbot starts a new process for its shell -- it really doesn't have a
choice because the shell binary isn't linked with Connectbot, and exec()
in a thread stinks.  To stop it, it just closes stdin/stdout!!!  So
zombies can (and do) linger.

I suppose dropbear could be in its own process if it had something like
stdin/stdout to communicate failure?  Or it could just write error
messages to (i.e.) /sdcard/ssh/log.  To stop the service, it would just
use kill().

I am curious how the main waiting-for-connections loop looks, but even if
it uses select(), I'm not sure how I would honor Thread.interrupt() or
whatever.  It's not guaranteed to interrupt select(), and I'm not keen on
adding an arbitrary timeout/polling feature to it.


December 20, 2014.

So, I added a builtin scp endpoint.  It was pretty straight forward,
except dropbear defaults to vfork(), which blocks the parent until the
child runs execve()!!

Anyways, I noticed that scp doesn't quote its arguments to the remote
scp. That means you can't conveniently copy a remote file with a space in
its name (it becomes two files).  But the upside is that this is where
wildcards are handled -- by the shell!

So I need to either run it as a separate executable launched through the
shell, or make my own implementation of wildcards.

It is easy, using a $(BUILD_EXECUTABLE) script, to get ndk to build an
executable.  But it is only packaged up if it is named "gdbserver" (and
debug apk), or "libfoo.so".  The good news is that libfoo.so can be
executed in /data/data/org.galexander.sshd/lib/libfoo.so, so that is a
viable option.

Doing the expansion myself is not necessarily hard either, though.  I
need a library function called glob(), which is apparently not part of
bionic.  But I have the idea some cut and paste would resolve that with
very little extra work on my part.


December 21, 2014.

Well, bionic libc *does* provide fnmatch(), and even scandir() (a
shortcut for readdir).  In the best case, though, that still leaves me
with a bit of a path parsing conundrum (I have to tell scandir which
directory to operate on).  And also a bit of an escape character
conundrum -- \* and "*" should not act like wildcards.

Those are not insurmountable but I think I've talked myself out of it.
So then the question is, do I figure out how to ship an executable, or
do I do some hack like open a pipe to "/system/bin/sh echo filespec" and
use the shell solely for expansion?

I'm developing the idea that it's actually pretty easy to ship an
executable, I just need to find some -pre-package step where I can do
"mv scp libscp.so" and then it will ship.  ndk-build will not let me make
a target with a "." in it directly.

...

Now scp, sftp-server, and rsync work as separate executables... rsync
does fail at -z because it needs it's own custom zlib...The stock
"external" one seems to lack the "old-style compress" method.  There is
another commandline option for the new (deflate?) technique, but I think
the normal -z ought to work too.  But that is literally the last feature!
Then just release details.


December 29, 2014.

First problem report from a user.  Lollipop (Android 5.0) requires "PIE"
executables -- position independent code.  I think that is a modern
equivalent to -fpic that Android is now requiring so that it can
randomize addresses to try to obscure stack smashing attacks that rely on
fixed addresses.  It is epicly lame.

Anyways, the big fuck-you from Google is that Ice Cream Sandwich (Android
4.1) and earlier require fixed-position code.  So one binary will not
generally work on both.

Here is a good summary:
   https://code.google.com/p/android-developer-preview/issues/detail?id=888

There is something called "run_pie" which you can wrap your executables
in that lets older Android run PIE executables.  It would require a
relatively small change to the exec() call to prepend it with "run_pie".
That seems like a hack.

The suggested remedy is to build two different apks!  Yuck!

Anyways, it is only executables (not libraries -- they are position
independent already) that are affected.  And apparently static
executables don't care one way or the other.

So that is my remedy -- static executables for the moment.  I tested them
and it is only a little bit bigger -- 904kB of binaries instead of 668kB.


January 18, 2015.

Markus Ethen suggested it display the current IP address so you know
where to ssh to, in case it isn't convenient to use static dhcp or to
remember the address.  That seems to be easier said than done.  You can
use WifiManager, but that won't give your IP address unless you're on
wifi.  That is probably "good enough", but it is certainly not ideal.
There is also java.net.NetworkInterface, which seems to return a random
ipv6 address.

Ah-hah!  It is fe80::macaddr, which is a bogus "local-connection only"
ipv6 address, like 192.168, but automatically-generated without dhcp.
So if I skip that, it finds the proper ipv4 address!

Pfew!  I was thinking I'd have to directly use /proc/net/dev and
SIOCGIFCONF, just like ifconfig does, but it works fine with
java.net.NetworkInterface.


June 20, 2015.

At some points, rsync is only write()ing, and assumes that the other end
will receive it all.  The other end does a little bit of write()ing of
its own, and then is happy to read() all it wants.  So this written stuff
may sit in a buffer somewhere indefinitely.  If that happens, an
infelicity in the design of SuperSU causes everything to wedge.

Of course, this is only if you set the shell to /system/xbin/su as a way
of having root access for rsync.

Anyways, I made a new program, "buffersu", which is just a
stdin/stdout-buffering wrapper for rsync that is guaranteed to always
perform any read() that is possible at any time, no matter how many
write()s are outstanding.  That seems to do the trick.


June 21, 2016.

Chris Moore reports that rsync and sftp do not like files larger than 2GB.

rsync was easy - it just needed an additional #define in rsync/config.h
to enable its builtin support for using stat64/lseek64/off64_t/etc.

Now that I'm investigating sftp, I find this surprising fact about bionic
(though the glibc man page for stat(2) tried to tell me this) - stat64
and stat are the same thing!  But off64_t and lseek64 are significant.
That should make converting sftp pretty convenient.  Especially since
sftp already uses "u_int64_t" instead of off_t.

p.s. Chris Moore gave me this command to test sftp, which turned out to
be useful:

   curl -v --pubkey .ssh/id_rsa.pub -r 2147482624-2147484672 -k sftp://mushroom:2222/sdcard/ssh/buh -o buh-new

As for scp, it's not as clear what needs to be done.  It doesn't use
lseek.  But it does use off_t a bit, including on an index in a for loop
that is compared against st_size (which is 64-bit).  So I'll just change
all of the off_t to off64_t and hope for the best.

sftp and rsync work!  Not gonna bother testing scp on big files...


October 1, 2016.

Jared Stafford told me startForeground() improves responsiveness on
Nougat.  There had been a comment suggesting startForeground(), but I
never got around to trying it because it has worked "well enough".  With
Nougat, though, there is a definite tendency for SimpleSSHD to be
non-responsive.  I'm not sure exactly what its cause is, but the symptom
I notice most frequently is that the first ssh connection after a while
will be delayed "a long time" - on the order of 10-30 seconds, or maybe
indefinitely sometimes.  Oddly, a second connection can sometimes get
through undelayed, even before the first connection does.  It is as if
the fork() of process for the new connection is where the delay is, not
in the listen() call.

That's not overall too surprising, Nougat is a lot harsher about
background processes as part of a Google push to reduce power consumption
on idle devices.

Another concern is related to a change back in July - sometimes the
system will kill the sshd process for no good reason (maybe because they
removed it from the recent apps list).  The remedy I settled on was to
monitor for the sshd process dying from within the regular
Android-managed process, and restart it.  I guess I didn't write down
where in the documentation I found it, but Android seems expressly
antagonistic to non-system-managed processes.  If they ever get more
hard-assed about that, this whole idea goes out the window.

Anyways, I implemented startForeground(), and I am unhappy that it
requires a Notification. At API 7 (Android 2.1) those are really
primitive.  For example, the PRIORITY_MIN behavior which will sometimes
hide the notification is added in API 16 (Android 4.1).  So, I've got it
with this stupid old-style notification, and it really doesn't look good,
and it is always present.  That is not awesome.

On the other hand, it's easy to block the notifications, and a few people
have expressed an interest in a notification.

It doesn't seem worth it to me to upgrade to a newer API just for the
better notifications...  On the other hand, Google Play shows that I have
862 users:
    Android 7+  :  3.13%
    Android 6+  : 37.47%
    Android 5+  : 67.86%
    Android 4.1+: 96.62%
    Android 4.0+: 98.01%

The oldest reported version is Android 2.3.

So, there are a few people on very old versions, but actually SimpleSSHD
is used on newer devices than the average app, which is the reverse of my
typical trend.  So a few people would be negatively impacted, but not a
very large number.  I could switch to multi-APK mode so that legacy users
are just stuck with an unsupported back-version, which is probably what
they truly want anyways..

Anyways, I'm gonna use it with startForeground() and the notifications
disabled for a while, and if I find it to be an improvement then I'll
just make it so clicking on the notification goes to the app, update the
doc, and then publish it.

...

Looking up doze mode details for improving a different app, I stumbled
across this:

   https://www.bignerdranch.com/blog/diving-into-doze-mode-for-developers/

   One last case which is not mentioned in the Android documentation is
   an app using a foreground service. Any process using a foreground
   service is exempt from Doze Mode effects, which is key for
   long-running applications that you may want to run even if the user
   has put their phone down for a long period of time -- like a music app,
   for example.

   There is, however, a bug in Android Marshmallow which requires a
   foreground service to be in a separate process from all other activity
   code, documented here. It is planned to be fixed in Nougat.

Not exactly confidence-inspiring.  And I haven't come across a
description of how exactly doze mode screws up SimpleSSHD, either.

It might be worthwhile to do the work to find out where things actually
get wedged, it might even be a flaw in Dropbear that makes it so
unreliable with Nougat.


October 16, 2016.

I've been using a foreground service for a while, and it has not caused
me any troubles.  The thing I have been most anxious about is that it
might disable doze mode entirely...but there has not been any noteworthy
overnight drain.

So, in case someone does have problems with it, I am making it an option
that defaults to enabled.

Looking through email, I haven't seen any, but I have the idea several
users have asked for a notification icon in the past.  And now that that
is finally implemented, I am curious about other things people have
requested that I have not been keen on.  And Jan Ondrej's requests come
to mind:

  o) setting to start the service automatically when the application is
     launched
  o) QUIT button that stops the service and the activity at once
  o) not allow wifi to power down when the activity is open

I'm really not crazy about integrating any kind of wakelock.  And having
two buttons still seems silly to me.  But with the notification there,
the idea that someone will micromanage whether the service is running or
not does not seem so far fetched.

So I'll go ahead and add "Start on Open" setting.

...

Looking at reviews on Google Play Store, I finally found a couple reviews
in the last couple months who would have enjoyed password login.  I'm
still pretty opposed to it because it seems like the usage model would be
to enable a default password, login with it to transfer an
authorized_keys file, and then disable the default password.  That is
fine, and would even be kind of convenient (I might use it), but it seems
more often than not the default password would be left enabled
indefinitely, which is not awesome.  And I can't imagine more than 1% of
users ever typing a strong password into their phones.

But I've thought of a compromise.  What if, if there is no
authorized_keys file, it accepts passwordless logins but with some sort
of obnoxious alert dialog sort of thing to interrupt the user?  That way,
you would be able to login once to copy the authorized keys file, and the
nuissance alert would be no big deal.  Then once the authorized keys
exists, no further action is necessary.

It's a pity there is no convenient way to interact between the Android
GUI thread and the sshd thread.

Ah-hah!  I've got the least effort idea in my head!  Under situations
that I'm not sure what they should be, it should generate a random
password and display it on the phone's screen.  Probably it should
generate it iff there is no authorized_keys file at all.  Since that
detection happens for each client connection, then probably all of this
logic should go in dropbear itself, and the display should come through
dropbear.err.

Then we might even want a UI way to delete authorized_keys, perhaps even
as a replacement for the current awkward UI.


November 19, 2016.

I got a user request to update for security.  I looked at dropbear and
didn't see any relevant security issues, so I'm gonna hold off for a
while, but it should be on my radar.

I also got a user request for writing to external SD card.  He gave
this link:

   http://stackoverflow.com/questions/33162152/storage-permission-error-in-marshmallow

It gives me a really strong deja vu, I think I tried that a few months
ago when a nearly identical request came in, and it didn't work.  I wish
I had kept notes for that experiment!

I think there are two separate issues.  I think Android 6+ push you to
use requestPermission() to explicitly enable the WRITE_EXTERNAL_STORAGE
permission, but if targetSdkVersion is low enough then you are
grandfathered in, so we don't care.  The second issue is that Android 5+
require use of a special API to access a removable SD card (which is
different from /sdcard, which is typically internal storage protected by
WRITE_EXTERNAL_STORAGE on new phones?).  That second issue is what is
biting people.

I don't know any way around that.  If Google doesn't back down, then I
guess the only plausible way around it would be something like an
LD_PRELOAD that intercepts open/lseek/read/write/close to external SD,
and replaces them with connection to a local daemon process that is
running in a typical Android context and is able to use the awful API.

Seems like a lot of work and complication.  I might go through with it if
I happened to use external SD myself, but I'm of the personal opinion
that removable storage is obsolete now that even relatively cheap phones
like the base Moto G4 come with 16GB...  640kB ought to be enough for
anybody.

I told the most recent guy to try SuperSU.  I don't have any idea if that
will really work, to be honest.


October 28, 2017.

At the beginning of October, a user notified me that rsync doesn't work
on Android 8.0 (Oreo, API 26).  In the past week, Google has upgraded my
Nexus 5x to Oreo and I can confirm it.

It seems that SE Linux or something causes certain system calls to
perform the equivalent of:

    fprintf(stderr, "Bad system call\n");
    exit(-1);

It should return ENOSYS instead, but someone at Google is not cool enough
to be working with Unix.

The first one I discovered like this is sigprocmask(), which we can
probably do without.  The next one is chmod(), which is somewhat more
useful.

The troubling thing is that I can find a file where the commandline chmod
works, but the same chmod() doesn't work in rsync.

I figured maybe my NDK was just too old ("r10d"), but I think I can't
conveniently upgrade it because Google only distributes the NDK for Linux
x86-64 now.  I was using SDK 7, so I tried SDK 11, 17, 19, and got the
same result.  The NDK I have also has a directory for SDK 21, but it has
typos in the header files, or they aren't compatible with its version of
gcc.  But anyways, if SDK 19 doesn't work then maybe it's more than just
linking against a bad version of Bionic.

Well, I think I've got it - fchmod() works, but chmod() does not.
*shrug*


March 4, 2018.

Looked in the google play console for crashes, and I find a few.  10
people have run into UnsatisfiedLinkError, and they seem to all be using
x86.  According to

https://stackoverflow.com/questions/32598756/android-ndkhow-to-exclude-x86-device-in-google-player

It's not plausible to fix this problem by blacklisting x86 devices!
Google sucks!  And the justification is that there is an ARM emulation
layer, but obviously it doesn't work and why should I have to debug it??

Anyways, someday may want to try making a jni/Application.mk and setting
APP_ABI in there to support x86 too?  Do I really think that will work
for scp/rsync/etc?  Guh.

And this bug has only one report...  The startActivity() call to open the
documentation is getting a android.content.ActivityNotFoundException.  I
guess it must mean there is no browser installed or something?  I seem to
be using the normal way to visit an http programatically..  Only one
report, so I guess I just don't care.


March 24, 2018.

Win Bent emailed me to let me know his x86_64 Asus ZenPad is able to run
SimpleSSHD but is unable to run rsync.  So, the ARM-on-x86 emulation
layer is catching up and now works sometimes, but isn't compatible with
the hack for scp/sftp/rsync.  Win was kind enough to test a build that
supports just armeabi and x86, and reported it works.  So I don't need to
build support for both x86 and x86_64, apparently.  Nice to have a
concrete answer to the question!



May 16, 2018.

Roland Jaeger let me know busybox's "su" doesn't appreciate being called
with "-" prefix to argv[0] for a login shell, it can't find the "-su"
applet.  su wants "-" to come in argv[>=1] instead to indicate a login
shell.

I guess it's kind of a hack but I just don't see it causing much
trouble...  If the string "su" is found in the shell's name, it runs
"su -" instead of "-su".  *shrug*.  Roland tested it and reports it works
for him.

He also notes that the default /system/bin/sh distributed with his device
doesn't run .profile, instead it runs whatever is in $ENV.  Apparently
mksh is "the Android shell", and indeed that is what's on my Nexus 5x.
mksh is supposed to run /etc/mkshrc (well, /system/etc/mkshrc on Android,
I guess), and then $ENV.  But on my device, it loads .profile too.  So I
guess there is some diversity of configurations.  *shrug*

NB - bash supports the same idea but it calls the variable $BASH_ENV, or
$ENV if --posix is set.  *shrug*  And whatever shell comes with
SimpleBusyBox (ash?) loads .profile by default.

Anyways, it seems the obvious way forward is to make a setting for the
environment...just one name=value per line.

...

Noticed a couple crashes in the Play store console.  One is a repeat of
this Note 7 that gives ActivityNotFoundException when viewing
documentation.  I decided to catch the exception and display a dialog
asking the user to contact me, because I'm curious.

The other crash is a NullPointerException due to a bug in older Android
(a 2013 Nexus 7).  It isn't my fault and I don't care.
   https://issuetracker.google.com/issues/36972466

There is also an ANR, I think it's my very first!  Here's the message:
   Input dispatching timed out (Waiting to send non-key event because the
   touched window has not finished processing certain input events that
   were delivered to it over 500.0ms ago. Wait queue length: 25. Wait
   queue head age: 34478.4ms.)
I can't tell if it's saying it blocked for 500ms or for 34s, but either
one seems problematic.

It's 4 identical-looking failures on one day, so it might be a fluke.
It's on x86_64, though I don't think that's the problem...

There are a ton of threads so it will be a bit of a trick to try to describe:
   main - waiting in epoll_wait() under a bunch of framework
          MessageQueue/Looper stuff.
   Thread-23 - sleeping in UpdaterThread.run() line 26
   Thread-15 - SimpleSSHDService.run()'s call to native waitpid()
   and just a ton of misc threads that don't seem interesting to me

So, it seems like the main thread is specifically waiting for something
to do, I have no idea why it's not responding to user input.  I don't
think the blocked UpdaterThread or SimpleSSHDService thread, because
those are specifically in other threads because they are designed to
block.  I'm thinking it's a fluke of some sort, maybe a DoS sort of
scenario on this one device.

Anyways, the other thing I found out at the Play store is I got warned
because I'm supposed to "target a recent SDK", which means API level 26
(Android 8.0 Oreo).  I think this is dumb but apparently it only means
I have to update android:targetSdkVersion to 26.  I can leave
minSdkVersion at 7, and target=android-7.  I hope.

I imagine a bit of UI will move around but it should just be a matter of
shaking it out and then testing it on an older device.

Oh, I just remembered the important new Androidism - permissions.  In
particular, I think it is now more complicated than just
WRITE_EXTERNAL_STORAGE.  Ugh?

Using my Nexus 5x (Android 8.1), updating to a new one with
targetSdkVersion 26, everything seems to just work.  But the
blue-on-white for the IP display becomes blue-on-black and it is almost
unreadable.  And also, it is kind of ugly.  I think if I can switch it to
a dark theme or something that will work itself out.

But then I uninstalled the app and installed it from scratch with
targetSdkVersion 26, and that does not work at all.  On startup it shows
the next "null" on every line where it's supposed to show the log.  And
once the service is started, the log is still null, and anything
attempting to connect says:
   Connection closed by 192.168.1.23

So my guess is that it's now more complicated than just
WRITE_EXTERNAL_STORAGE.  Ugh!

...

A little info from

https://medium.com/google-developers/picking-your-compilesdkversion-minsdkversion-targetsdkversion-a098a0341ebd

which told me I can put the compile target much ahead of the min target
and supposedly I'll get warned if I use new features.  Anyways, maybe I
can gate the new permissions model behind a simple if?  I'm not sure if
it will be enough to explicitly ask for the permission, or if the
permission is accessed differently.

It also suggests I look at the "Platform Highlights" in the API Level
table at:

https://developer.android.com/guide/topics/manifest/uses-sdk-element

That's quite a few to check out to go from SDK 11 (Honeycomb) to SDK 26
(Oreo).  But I'll probably learn something...

Have to use checkSelfPermission() and requestPermission() to get
"dangerous" permissions (WRITE_EXTERNAL_STORAGE).  Luckily, INTERNET and
RECEIVE_BOOT_COMPLETED are "normal" permissions and just need to be in
the AndroidManifest.xml, I guess.  And I don't need to worry about
READ_EXTERNAL_STORAGE, so long as I explicitly request
WRITE_EXTERNAL_STORAGE.


May 19, 2018.

Michael Mess wrote to let me know that he can't use authorized_keys file
because the /sdcard/ssh/authorized_keys file is group-readwritable.  I
know regular OpenSSH on a PC does complain if the authorized_keys file is
world-writable, so this made sense to me.  He says it is a security flaw,
but really, it is not, because any app that can run code and write to
/sdcard/ssh already has all of the permissions that SimpleSSHD has
(except network, but whatever) -- it isn't escalation, just a horizontal
spreading.

He suggested moving the SSH config into app-private, which is something
I've been toying with anyways.

So after some internal debate, I decided to do two changes:

  * add "Copy app-private path" to the options menu, which brings up a
    dialog showing the app-private path, with an option "Copy" to put it
    in the clipboard.
  * make the default for new installs for "home" and "path" be the
    app-private dir

I look forward to seeing if anyone complains about it.


May 20, 2018.

I tried updating the build target to a newer version than minSdkVersion,
and I got a warning, and I looked at the official google documentation,
and you can't build with anything newer than the minSdkVersion.  I mean,
I knew that, so, what I'm saying is, I feel stupid for reading that
medium.com link.


June 8, 2018.

Request from Joan Marce i Igual for --iconv.  That requires iconv.h,
which isn't part of Bionic.  GNU libiconv will do it, but it doesn't look
particularly easy to build, and it isn't small.  Someone on github has
uploaded their tree for building iconv on Android, which might save me a
bunch of effort:

   https://github.com/ironsteel/iconv-android.git

Unfortunately it doesn't have much history to it, so I don't know if
it'll be worth anything or not but it should give me a sense of the build
task without forcing me to decipher autoconf.


May 25, 2019.

To update to the new SDK (26 required now, 28 required starting in
August), I have to switch to gradle and all that garbage.  Every time I
update anything with the new SDKs, everything breaks, even after I've
already updated everything to gradle.  So basically it is the worst
possible development environment.

Anyways, the NDK now doesn't support anything older than android-16 (JB
4.1), which is stupid but whatever.  Looking on the play store, it looks
like I have 5 users on these older devices.  I hope it simply refuses to
update for them, and they can continue to use the older version!

... I got it to build and install and run, and it "works".  The only
issue that is currently biting me is (on using am to install an apk):

   InstallStart: Requesting uid 10180 needs to declare permission
   android.permission.REQUEST_INSTALL_PACKAGES

Anyways, there's a bunch of stuff remaining to do, and then I will
release it.


May 26, 2019.

I got an AVD (emulated android) running SDK 26 (Oreo 8.0) x86.  It uses
kvm virtualization so it's much faster than the old emulated ARM I used
to be shackled with.

Anyways, right off, it says (in a toast):
   Developer warning for package "org.galexander.sshd"
   Failed to post notification on channel "null"
   See log for more details
adb logcat says:
   05-26 17:13:49.877  1741  1764 E NotificationService: No Channel found
   for pkg=org.galexander.sshd, channelId=null, id=1, tag=null,
   opPkg=org.galexander.sshd, callingUid=10085, userId=0, incomingUserId=0,
   notificationUid=10085, notification=Notification(channel=null pri=0
   contentView=org.galexander.sshd/0x7f030001 vibrate=null sound=null
   tick defaults=0x0 flags=0x40 color=0x00000000 vis=PRIVATE)

This gives a kind of deja vu -- I think from BluntMP3?  I'm just adding
it to the todo list.

To access SimpleSSHD, run
   adb forward tcp:2222 tcp:2222
   ssh -p 2222 localhost

And it demonstrates that the sdcard access is forbidden.  In fact, I can
toggle it inside the System Settings -> Applications -> SimpleSSHD ->
permissions -> Storage, and it takes effect more or less immediately.

Android development is such a constant stream of astonishing garbage.
When it requests the permission, which happens just as I would want it
to, it then pops up a "System UI has stopped" dialog.  But look, it isn't
my fault:

   https://stackoverflow.com/questions/49261555/system-ui-has-stopped-emulator-when-requesting-permissions

For real.  There's a bug in the emulator you fix by "increasing the DPI."
I had tried some older 854x480 sort of emulated device because I didn't
want all those pixels, but I'll just use Pixel 2 (the default, and one
Google surely tests).  It has a different skin where the soft buttons are
part of the skin, which is I bet what the bug is around.

So, the permissions request works now.  It just asks once, and no matter
what the answer is, it never asks again.  And if it is grandfathered in
because the previous version of the app used an older SDK, then it will
never ask and it'll just have the permission.  And, at least on an
emulated Pixel 2, it can access /sdcard, which is "internal storage."
It does emulate an "SD card", but it can't access that.

...

Getting a channel onto the notification was a pain in the ass.  All this
gradle stuff is getting increasingly undocumented.  Every time they
change something so they won't ever have to change anything again, they
then immediately change everything.  This leads to a mass proliferation
of immediately-obsoleted documents.  It even damages resources like
stackexchange because people take their extraordinarily unique context
for granted when asking and answering questions.  So something that
worked against gradle 3.3.4 will now be broken against gradle 3.3.5 but
no one will think to mention what version of gradle, or what version of
the build scripts gradle runs, or what-have-you.

Anyways, the upshot is, the way I got it to work is I opened the project
in Android Studio, and eventually I used Refactor->Migrate to AndroidX,
which turned out to have all manner of complications but here we go.

Speaking of Android Studio, the AVD Manager (Android Virtual Device, I
guess) is not accessible under Tools, even though it should be.  Instead,
you have to click on the icon which is a portrait phone with a green
android head on the lower-right corner of it.  Upper-right corner.
And you have to open a project before it will show you that.  Jesus.

...

Testing with pie, I am able to reproduce the problem with start-on-boot.
Here's some excerpts from logcat:

   05-26 21:24:26.251  1837  3408 W ActivityManager: Background start not allowed: service Intent { cmp=org.galexander.sshd/.SimpleSSHDService } to org.galexander.sshd/.SimpleSSHDService from pid=3756 uid=10085 pkg=org.galexander.sshd startFg?=false
   --------- beginning of crash
   05-26 21:24:26.251  3756  3756 E AndroidRuntime: FATAL EXCEPTION: main
   05-26 21:24:26.251  3756  3756 E AndroidRuntime: Process: org.galexander.sshd, PID: 3756
   05-26 21:24:26.251  3756  3756 E AndroidRuntime: java.lang.RuntimeException: Unable to start receiver org.galexander.sshd.BootReceiver: java.lang.IllegalStateException: Not allowed to start service Intent { cmp=org.galexander.sshd/.SimpleSSHDService }: app is in background uid UidRecord{5aff37a u0a85 RCVR idle change:uncached procs:1 seq(0,0,0)}
    ...
   05-26 21:24:26.251  3756  3756 E AndroidRuntime: Caused by: java.lang.IllegalStateException: Not allowed to start service Intent { cmp=org.galexander.sshd/.SimpleSSHDService }: app is in background uid UidRecord{5aff37a u0a85 RCVR idle change:uncached procs:1 seq(0,0,0)}
    ...
   05-26 21:24:26.251  3756  3756 E AndroidRuntime:        at android.content.ContextWrapper.startService(ContextWrapper.java:664)
   05-26 21:24:26.251  3756  3756 E AndroidRuntime:        at org.galexander.sshd.BootReceiver.onReceive(BootReceiver.java:11)

So it looks like a pretty intentional rule that you can't start a service
from a boot receiver??

And I have the same problem on my Z2 Force (Oreo 8.0) now that I've
updated the SDK.

This guy says it will allow you to startForegroundService(), so that's
what I'll try...

   https://stackoverflow.com/questions/49572570/android-start-a-service-on-boot-not-working

Which seems to work!  So there is a need for some sort of dance in the
Settings screen to force it to enable foreground services if
start-on-boot is selected, and then we'll be golden.


June 16, 2019.

I finished the dropbear 2019.78 merge and got it all to work again on the
x86 version 28 (Pie) emulator.  It also works on x86 version 26 (Oreo)
emulator, and on my ARM Oreo phone (Moto Z2 Force).  I also tried with an
emulated ARM version 16 (JB 4.1), and it works, but it generates a lot of
this spamming the log:

   Failed lookup: Non-recoverable failure in name resolution.

This gives me a kind of deja vu, something to do with library versions. I
have the idea it's because I built with a newer libc than what is found
by dynamic linking in older Android.  But I cannot link the main dropbear
thing with -static because it needs to be JNI (which is loaded with
dlopen()).  Apparently.

Anyways, I'm not sure there's anything I can do about that other than
reduce the log noise.  I'm not really interested in digging up a magic
older version of the NDK or anything like that.

But I do think the only reason it has -static on the stand-alone
executables is basically a hack to make them work with the old NDK, so I
can get rid of that...

Testing with emulated x86 Android 21 (KK 5.0)...  It seems to work fine.
It resolve my IP to the string "127.0.0.1", anyways.  rsync seems to
work, and start-on-boot in the background works.

Anyways, I made a naive thing to decode an IP address to a numeric
string, in case getnameinfo() fails.  It is working for me in the ARM
Android 16 now.  It generates a reasonable string even though it
presumably fails to use the library lookup.  It starts on boot as a
background service.  And rsync and scp work.  Only need to test on my
Moto X now.

...

Testing start-on-boot on my Moto Z2 Force, it works, but there is an
infelicity.  If I go into Settings and try to turn off foreground
service, it won't let me because start-on-boot is selected and I am using
Oreo.  It is supposed to show a toast to let me know this, but the toast
doesn't appear.  That's because I had previously disabled notifications
so that the foreground service doesn't have a notification.

I can make the toast appear by following these steps: re-enable
notifications (manually in Settings -> Apps & Notifications), then
re-start the service, then disable the notification (by long-tapping on
the notification itself).  Then toasts work.  I think probably it has
saved the fact that all notifications are disabled, because it only knew
one class of notification when it was using compatibility with the old
SDK...but now it knows two classes (a notification and a toast), and it
records that only one class is disabled.  I really have no idea but I
think it sucks.

...

Testing with Moto X (ARM, Android 5.1 API 22), and it works.  But it has
this infelicity...when scp or rsync is run:

   WARNING: linker: /data/app/org.galexander.sshd-2/lib/arm/libscp.so: unused DT entry: type 0x6ffffffe arg 0xb64
   WARNING: linker: /data/app/org.galexander.sshd-2/lib/arm/libscp.so: unused DT entry: type 0x6fffffff arg 0x2

These are DT types that are present in the .so which are not supported by
the kernel.  It may be because the kernel is CyanogenMod?  The types are
DT_VERNEED and DT_VERNEEDNUM.  They refer to a section .gnu.version_r,
which I guess holds two 32-byte entries which are unintelligible to me.

Supposedly I can use an "ELF cleaner" to strip out these DT_VERNEED
things.  But there's some ambiguity as to whether they're necessary or
useful.  I think I'm gonna leave that be.

More productively, I found that it won't startForegroundService() because
that was added at Oreo!

I can't seem to get start-on-boot to work, but from some of the crap in
logcat, I have the idea CyanogenMod might not be good at broadcasting the
boot event.

Now for the interesting test...I uninstalled SimpleSSHD on the Moto X
(API 22), and am reinstalling it new.  So it won't have grandfathered
permissions.  It works fine!  No surprises.  It still doesn't start on
boot *shrug*.

Now to try the same uninstall test with Moto Z2 Force (API 26).  It works
fine, and on the first start-up it does ask for permission to access
files (/sdcard).  To my surprise, it saved my Settings and my
/data/user/0/org.galexander.sshd/files.  That's actually kind of bad,
because the host key would be saved, and there aren't really many
settings to re-enter in the upside case.  Apparently this is new behavior
since I added targetSdkVersion>=23, so users haven't had their data
backed up yet and I can change this setting with allowBackup="false" in
the manifest...

allowBackup="false" took immediate effect and had no surprises...


August 4, 2019.

I finally got a dump from a user (Hammad), and it's quite distressing.
The stack trace is roughly:
   backtrace()
   sigsegv_handler()
   /system/bin/app_process64+0x2a90
   __kernel_rt_sigreturn()
   A5xContext::HwAddNop(unsigned int *, unsigned int)
   EsxCmdMgr::IssuePendingIB1s(EsxFlushReason, int, int)
   EsxCmdMgr::Flush(EsxFlushReason)
   EsxContext::Destroy()
   EglContext::DestroyEsxContext()
   EglDisplay::MarkContextListForDestroy()
   EglDisplay::Terminate(int)
   EglDisplayList::Destroy()
   EglDisplay::DestroyStaticListsMutexesAndTlsKeys()
   EsxEntryDestruct()
   /system/vendor/lib64/egl/libGLESv2_adreno.so+0x12780
   [... cut off at 16 ...]

So many questions!  I think app_process64 must be the actual C main() of
a process, responsible for branching into all the android system
libraries?  I imagine it's involved because it's somehow intercepted the
SIGSEGV and re-dispatched it to my handler?  I don't see any way we could
have branched into libGLESv2_adreno from userland, so the SIGSEGV must
come from the UI thread, I guess?  Maybe this SIGSEGV is actually the
sort of thing we'd get if we tried to call UI code from the non-UI
thread??

It looks like GLES is busy cleaning itself up, and it crashes.  Why's it
crash?  Why's it trying to clean itself up?

Hammad says there is no problem using sshd...I thought he meant that the
re-start logic is working for him but his dropbear.err has multiple dumps
in it!  The SIGSEGVs are apparently not killing the daemon.

There are no timestamps on the dumps, but it looks like they're
associated with activity anyways.  Each dump happens between "Disconnect
received" and "sigchld".  Some of them have "server select out"
interleaved into the dump, which I think is the result of Hammad running:
   while true; do ssh phone 'exit'; done
That is, it appears he starts a new connection the very instant the old
connection ends.  So the new connection comes into the server process
while the child process is in the act of dying.

The thing is, I don't see how it could possibly be getting signals from
the Java side of things, because it fork()s before setting up the signal
handling.  It's not just running in a different thread, it should be a
totally separate process.  I can test this but I don't think I'm wrong
about that.

So I guess just about the only thing that's really possible is that
there's an atexit() which survives the fork() because it isn't followed
up with an execve().  It's not caused by ARM, or even necessarily by
Android 9...the reason it doesn't show up in the emulator is that the
libGLES that registers the atexit() is vendor-supplied for specific
hardware ("Adreno").

So I need to figure out how to bypass the atexit() somehow, perhaps by
calling _exit() directly?


August 12, 2019.

Kumaran Santhanam suggests START and STOP broadcast intents, which seems
A number 1 to me!

And a few people have written back to say the atexit bypass worked for
their SIGSEGV - pfew!


September 21, 2019.

First, some user reports.

Kumaran says the START/STOP broadcast intents work wwith Tasker on
Android 7 but not on Android 9.  He also reports it works from the shell
(am broadcast --user 0 -a org.galexander.sshd.START org.galexander.ssh)
so I'm not sure what the difference is, and I'm not super inclined to
install Tasker to find out.  I wonder if there is some sort of implicit
distinction between sending a broadcast intent and sending a service
intent that is negotiated differently at Android 9?

Roman reports that it "works" on his Onyx Boox i68ML (eink, I think), but
it doesn't refresh the log display so he can never see the
one-time-password.  I think I just need to find a way to manually trigger
a refresh of the eInk but I haven't found anything like that yet...just a
bunch of people reporting that other apps (KOReader, CoolReader) stopped
working on onyx boox at some point.  I do remember being somewhat
surprised that the log view worked at all, so maybe there is something
missing from my use of TextView and we just have been getting lucky...

But while I was looking for a way to get the android emulator to emulate
eink (no dice), I stumbled onto the Android TV emulation!  I haven't
received one of these requests recently but they used to be a common
occurrence, and I suspect people would really appreciate if SimpleSSHD
was just available regularly through the app store on TV.

With the emulator, I was able to sideload the app with adb, and then
enable it under Settings -> Security & Permissions and then launch it
with Settings -> Apps -> SimpleSSHD -> open.  Then it works, except
there's no three-dots menu button, so no way to get to Settings.

Anyways, there's a whole laundry list of things to do to get into the app
store and to get shown in the regular launcher.

...

Luckily, even though the list of requirements is long, it is largely
irrelevant or redundant, so I'm just about there.

...

On Android, they suggest you make a URL Intent and send it to the system
browser.  But on Android TV, you make a WebView, I guess there is no
stock Chrome.  It's easy enough.  The disconcerting part is I can't test
it on my emulated phone or real phone because WebView.loadUrl() just
defaults to sending to the system Chrome.  That's fine, though,
apparently it's a known thing you can work around, but I really don't
need to work around it, assuming Android properly defaults to WebView
instead if Chrome isn't available.  *shrug*

So I'm tagging the new version.

...

When I went to upload version 23, I found that there was a crash reported
on version 22 with Android 9, two users, a Galaxy S9+ and a OnePlus5T.
The crash looks like:

   java.lang.RuntimeException:
     at android.app.ActivityThread.performResumeActivity (ActivityThread.java:3992)
     at android.app.ActivityThread.handleResumeActivity (ActivityThread.java:4024)
     at android.app.servertransaction.ResumeActivityItem.execute (ResumeActivityItem.java:51)
     at android.app.servertransaction.TransactionExecutor.executeLifecycleState (TransactionExecutor.java:145)
     at android.app.servertransaction.TransactionExecutor.execute (TransactionExecutor.java:70)
     at android.app.ActivityThread$H.handleMessage (ActivityThread.java:1926)
     at android.os.Handler.dispatchMessage (Handler.java:106)
     at android.os.Looper.loop (Looper.java:214)
     at android.app.ActivityThread.main (ActivityThread.java:6990)
     at java.lang.reflect.Method.invoke (Native Method)
     at com.android.internal.os.RuntimeInit$MethodAndArgsCaller.run (RuntimeInit.java:493)
     at com.android.internal.os.ZygoteInit.main (ZygoteInit.java:1445)
   Caused by: java.lang.IllegalStateException:
     at android.app.ContextImpl.startServiceCommon (ContextImpl.java:1666)
     at android.app.ContextImpl.startService (ContextImpl.java:1611)
     at android.content.ContextWrapper.startService (ContextWrapper.java:677)
     at org.galexander.sshd.SimpleSSHD.onResume (SimpleSSHD.java:62)
     at android.app.Instrumentation.callActivityOnResume (Instrumentation.java:1412)
     at android.app.Activity.performResume (Activity.java:7611)
     at android.app.ActivityThread.performResumeActivity (ActivityThread.java:3984)

It's the startService() call for Start On Open.  So I tested that on my
phone (Android 8), and on the emulator with Android 9 and 10, and I
couldn't get it to happen.  Either it's upset that it isn't
startForegroundService(), or maybe it somehow starts the service even
after it's already been started and complains about that?  It seems like
it must be intermittent or harmless, because one user has triggered it 6
times on different days over the week.

There's also a crash with version 19 on Android 9, and it only shows as
far as:
   android.app.ActivityThread.performLaunchActivity
Which seems to me to maybe be the same spot?  Anyways, it didn't recur,
and I'm not gonna be doing new updates to version 19 anyways, so,
whatever.


September 22, 2019.

The crash on startService() in onResume() has already been verified to
occur also at version 23, so I have to track that down.  I found this,
which is likely to be the underlying problem:

   https://stackoverflow.com/questions/52013545/android-9-0-not-allowed-to-start-service-app-is-in-background-after-onresume

It looks like the user opens the app with start-on-open, it works, and
then they let the phone fall asleep with SimpleSSHD on top, and some sort
of shuffle kills the service, and then they wake the phone up, and then
it tries to resume SimpleSSHD, which tries to re-start the service, which
fails because the phone hasn't finished waking up yet so even the top
activity isn't active yet, even though it's already in
SimpleSSHD.onResume().  Apparently acknowledged as a bug in Android 9.

I tried to synthesize this sequence on the emulator with x86 pie, and I
had no luck.  I was able to get the service to die (by broadcasting STOP)
while the emulator was "asleep", but then it woke up it didn't cause any
trouble.  I suspect it takes a few coincidences to reliably trigger.

Anyways, so what I'm doing is I'm having the startService() calls in
SimpleSSHD go through the SimpleSSHDService.do_startService() wrapper, so
that they become startForegroundService() calls as appropriate.  This may
solve the problem on its own, if the user happens to have selected
foreground.  But then I can also make this common path smarter...

On another note, I stumbled onto something that says Android 9 limits
implicit broadcasts (no explicit destination), and considers a broadcast
to be implicit even if it does have an explicit destination if there is
an "action string."  !!!  Not sure if that's something I can play with,
but putting it on the list.


October 7, 2019.

Tom Davidson was having some problems with port proxy.  I guess he just
wants client-side -L and -D to work, which they do work, so far as I
know.  But I tested, and -R does not work!  My phone seems to have some
sort of firewall, it hangs instead of saying connection denied.  So maybe
-R isn't bypassing the firewall.  Another possibility is that dropbear
simply doesn't support -R, but I kind of thought it did?


January 10, 2020.

I was here to add Fionn Behrens' request for dark mode support,
especially for the Notification.  And I found, it's already on the list.
There's a lot on the list.


January 29, 2020.

There's a cluster of reviews indicating problems with WinSCP:

   Wojtek El Jan 9, 2020 at 8:52 AM
   1 star
   Worked great until latest update. Keeps loosing contection when
   uploading file using sftp in WinSCP. Please do something about it then
   I`ll change my rate. Android 5.1

Sounds like the new receive window size breaks WinSCP??


March 20, 2020.

I happened to install wine today, so I decided to try WinSCP.  The newest
version of WinSCP (5.17.2) doesn't work, it gets an "Invalid access to
memory" error when connecting.  Don't know why, maybe it's wine or maybe
it's WinSCP.  Version 5.16.7 (slightly older) gets the same error.
Version 4.0.4 is way too old, and can't connect (doesn't know any modern
ciphers).  Version 5.9.3 is just right, I guess.  It "works".  But then,
using SFTP to upload a file around 1MB, it reproduces the reported error.
WinSCP reports "Server sent command status 11".  It has a log facility,
but it shows precious little information.  It seems to send about 512kB
and then it says:

. 2020-03-20 20:35:08.191 There are 197377 bytes remaining in the send buffer, need to send at least another 164609 bytes
. 2020-03-20 20:35:08.191 Looking for network events
. 2020-03-20 20:35:08.191 Detected network event
. 2020-03-20 20:35:08.191 Enumerating network events for socket 536
. 2020-03-20 20:35:08.191 Enumerated 1 network events making 1 cumulative events for socket 536
. 2020-03-20 20:35:08.191 Handling network read event on socket 536 with error 0
. 2020-03-20 20:35:08.191 Server sent command exit status 11
. 2020-03-20 20:35:08.192 Selecting events 0 for socket 536
. 2020-03-20 20:35:08.192 Disconnected: All channels closed
. 2020-03-20 20:35:08.192 Connection was lost, asking what to do.
. 2020-03-20 20:35:08.192 Asking user:
. 2020-03-20 20:35:08.192 Connection has been unexpectedly closed. Server sent command exit status 11. ()

Not sure there's any information there.  The SimpleSSHD log shows just a
normal "Exited normally".  Does that mean sftp did an "exit(11)" ?  Was
there a SIGSEGV?  Did WinSCP just eat itself for no reason?  I have not
been very impressed with WinSCP (and there is already a user report that
switching to FileZilla is the right remedy all around), but I would like
to investigate before throwing in the towel.

The file is created on the target with length 65536.

Anyways, first thing to do is dick around with the setting that probably
caused the problem.  This is the change:

   #define DEFAULT_RECV_WINDOW 524288
   #define RECV_MAX_PAYLOAD_LEN (524288+16384)

The previous values were apparently

   #define DEFAULT_RECV_WINDOW 24576
   #define RECV_MAX_PAYLOAD_LEN 32768

Combinations DEFAULT_RECV_WINDOW / RECV_MAX_PAYLOAD_LEN.
512 kB / 512+128 kB    broken
24 kB / 512+128 kB     broken
24 kB / 32 kB          fixed
512 kB / 32 kB         fixed
512-32 kB / 512 kB     broken
512-32 kB / 32 kB      fixed
512-32 kB / 64 kB      fixed
512-32 kB / 128 kB     fixed
512-32 kB / 256 kB     fixed
512-32 kB / 384 kB     broken

It seems that WinSCP doesn't like RECV_MAX_PAYLOAD_LEN larger than 256kB.

Domagoj, who first pointed this out to me, sent this link:

   https://lab.nexedi.com/nexedi/slapos/commit/605e564b8f3008cdb48dbc6e82c956029469ff02

There they say that the -W option allows a major improvement in speed,
but in order to be compatible with OpenSSH the RECV_MAX_PAYLOAD_LEN must
also be increased.  I only made RECV_MAX_PAYLOAD_LEN "somewhat" bigger
than DEFAULT_RECV_WINDOW because that was how it was before...

So I guess I need to stop poking around in the dark, and find out these
things really do.

DEFAULT_RECV_WINDOW becomes opts.recv_window, which newchannel() uses to
pick the size of writebuf, and to set chan->recvwindow.

RECV_MAX_PAYLOAD_LEN-9 becomes RECV_MAX_CHANNEL_DATA_LEN, then goes into
chan->recvmaxpacket.

Both values are sent across by send_msg_channel_open_init()
(SSH_MSG_CHANNEL_OPEN), and also by send_msg_channel_open_confirmation()
(SSH_MSG_CHANNEL_OPEN_CONFIRMATION).

It looks like chan->recvwindow is decremented as things come into the
buffer, and incremented as they leave it.  recvmaxpacket doesn't seem to
do anything other than get sent across.

RFC4254 SSH Connection Protocol defines these SSH_MSG_CHANNEL_OPEN
packets.  DEFAULT_RECV_WINDOW is called 'initial window size' and
"specifies how many bytes of channel data can be sent without adjusting
the window".  RECV_MAX_PAYLOAD_LEN is called 'maximum packet size' and
"specifies the maximum size of an individual data packet that can be sent
to the sender."

So, really, I think that there is no reason for RECV_MAX_PAYLOAD_LEN to
be bigger than DEFAULT_RECV_WINDOW.  I think DEFAULT_RECV_WINDOW was just
unreasonably small in the Dropbear defaults, and RECV_MAX_PAYLOAD_LEN
happened to be the smallest that was permitted by compatibility.

A bigger DEFAULT_RECV_WINDOW would allow greater saturation of the pipe
without worrying about the latency of ACKs.  A bigger
RECV_MAX_PAYLOAD_LEN just saves the overhead of having more packet
headers, I think.  So I think in principle, DEFAULT_RECV_WINDOW will have
the bigger effect on effective bandwidth, so long as RECV_MAX_PAYLOAD_LEN
is at least "decently large."

So now I'm trying combinations to see performance and compatibility
OpenSSH (sending a 16.4MB file across ssh 'cat > /dev/null', wall time):

  512-32 kB / 384 kB     works 3.1s 3.4s 3.1s
  512 kB / 32 kB         works 2.4s 2.1s 2.0s
  1024 kB / 32 kB        works 2.2s 2.0s 2.2s
  24 kB / 32 kB          works 10.4s 10.3s 8.9s
  512 kB / 256 kB        works 2.3s 2.3s 2.1s
  512 kB / 128 kB        works 2.9s 2.1s 2.1s
  512 kB / 512 kB        works 2.4s 2.1s 2.2s
  256 kB / 256 kB        works 3.4s 4.5s 2.4s 4.7s 2.0s 2.1s
  128 kB / 128 kB        works 2.5s 2.3s 2.3s
  64 kB / 64 kB          works 3.8s 3.1s 3.2s
  32 kB / 256 kB         works 8.9s 9.1s 8.0s
  64 kB / 256 kB         works 3.9s 5.6s 3.1s
  512 kB / 128 kB(again) works 2.3s 1.9s 2.0s

Obviously a lot of variation from noise on the wireless network, though I
think the larger receive window actually helps erase some of that
variability because it doesn't have to wait for the ACK whether the ACK
is delayed by congestion or not.

So, rather frustratingly, I've (somewhat) reproduced the performance
motivation for changing DEFAULT_RECV_WINDOW, but I haven't found the
compatibility motivation for changing RECV_MAX_PAYLOAD_LEN.  So I'm still
stabbing in the dark.  I suspect that the compatibility problem was
actually a since-fixed bug in OpenSSH, since ideally it should honor the
packet length limit regardless of the window size?  Or!  The report is
actually that a packet of length 32777 was sent...  That's 32768+9, maybe
the -9 in the definition of RECV_MAX_CHANNEL_DATA_LEN is relatively
modern in Dropbear??  I bet that's it!  It was a phantom all along that
was forcing RECV_MAX_PAYLOAD_LEN to grow.

Anyways, it looks like DEFAULT_RECV_WINDOW really just needs to be bigger
than 128kB, and RECV_MAX_PAYLOAD_LEN hardly matters at all.  So I'm going
with 512kB / 128kB.  And I confirm, that does work with WinSCP.


December 28, 2020.

Dropbear 2020.79 finally adds support for ed25519, which is a frequent
comment I've received from users because some openssh configuration
generates these keys by default I guess?  Anyways, I'm finally updating
it to 2020.81.

The update went about as you would expect and seems to be successful.  I
just onnected to my phone using an ed25519 user key for authentication --
it works!

So that's about time for a new release.  People have apparently been
waiting since March for the WinSCP fix, though I stopped getting emails
about it and that's why I haven't bothered with it.

The only thing pending is updating to the SDK needed for the play store.
Supposedly they require 29 today and will require 30 in aug 2021.  I
happen to have already used 30 for TunerTime, so I know I've got the SDK
version 30 installed all the way, so that's what I'm gonna aim for I
guess.

It's currently at 28, so that's not a huge step...

Looking at the list of things to expect when updating to SDK 30, the only
one that looks relevant is "scoped storage enforcement", which is just
the /sdcard nightmare that we've known all along is getting worse.


January 17, 2021.

I have had a little luck today...  I tested a little with
requestLegacyExternalStorage and API 29, on an emulated Android 11, and
it seems to work.  Users will likely need to use the new "Enable /sdcard"
menu option.

Also, it turns out to be trivial to honor the MY_PACKAGE_REPLACED
(package upgrade) intent using the same receiver as BOOT_COMPLETED, which
is going to be great for people going forward.

...

I have been banging on the problem people have reported with
"Non-matching signing type." with older versions of OpenSSH.  I've been
told it's the OpenSSH 7.2p2 that ships stock with Ubuntu 16.04 and Mint
18.3.  Rich D did the legwork and found it is probably
https://svn.dd-wrt.com/ticket/7179

There is a new check for expect_sigtype != sigtype in dropbear 2020.81.
The fix the dd-wrt guys came up with is simply to disable that check if
expect_sigtype == DROPBEAR_SIGNATURE_RSA_SHA256.  I don't like simply
disabling the check, because I don't know what the role of the check is.
I don't want to be a blind fool.

It sounds like there's one protocol string "ssh-rsa" that can also be
used to represent "rsa-sha2-256".  I did not bother to trace through how
that string gets converted into these numeric values.  But at the bottom
of http://lists.openwrt.org/pipermail/openwrt-devel/2020-July/030200.html
it says the actual signature is DROPBEAR_SIGNATURE_RSA_SHA1.  This makes
sense from grepping around the dropbear source:

   {"rsa-sha2-256", DROPBEAR_SIGNATURE_RSA_SHA256, NULL, 1, NULL},
   {"ssh-rsa", DROPBEAR_SIGNATURE_RSA_SHA1, NULL, 1, NULL},
   DROPBEAR_SIGNATURE_RSA_SHA1 = 100, /* ssh-rsa signature (sha1) */
   DROPBEAR_SIGNATURE_RSA_SHA256 = 101, /* rsa-sha2-256 signature. has a ssh-rsa key */

So confusion between those two sounds likely to me.

...

Triaged the crashes again.  crash.20200109 is the only one that bothers
me.  It will probably continue at a low incidence until I figure out
what's causing it.

...

Oh and!  There is one more interesting problem, reported by Brad R and
Andreas S.  Maybe it's different problems??  The thing in common is that
they aren't seeing anything displayed from the dropbear.err file, and
then they aren't able to connect.  But Brad R says he used netstat and it
really is listening on the port, and he sent me a ssh -vvv report that
seems to show the server dropping connection after the client has
received an SSH2_MSG_KEXINIT, while waiting for a response to
SSH_MSG_KEXDH_INIT. So I guess the server must be running?

Andreas S concluded that the server isn't running, due to the lack of
displayed dropbear.err output.  That made sense to me at first, but now I
think maybe his server is also running, just not working??

So one possible explanation for both of them is that they have put their
dropbear directory under /sdcard, and the external storage charley
foxtrot has made them unable to access their server's host key at the
same time as making them unable to diagnose the problem (unable to read
dropbear.err).  I haven't yet asked either of them if they have
configured it to use /sdcard.

But I'm worried there's something more fundamental going on.  We'll see
if they report any progress with version 27 that I just released.


January 18, 2021.

Andreas S and Brad R wrote back to say their problem is fixed.  I suspect
their dropbear.err was somehow hidden by the external storage problem.


May 13, 2022.

Just got an astonishing email from an anonymizer service.  Hopefully they
don't mind me pasting the contents here, because I don't have time to
look into it at the moment.  They suggest a resolution for
crash.20220424:

   Hello,

   I see recent git change for your simplesshd app for
   RemoteServiceException. I worked on fixing that in my own app before
   and some devices have the issue, some don't. Its with the foreground
   notification use that people have been using and is something Google
   hasn't fixed.

   You can work around it by using WorkManager and Worker. You don't need
   to use the foreground stuff that way. I switched over my own apps that
   way successfully and no more problems from that situation.

   You can lookup "RemoteServiceException workmanager" and a stack
   overflow page suggests this which is the only way I found to solve it.

   I see you will also need to include the Android 11+ storage usage of
   asking the user to select a folder for access using new
   Intent(Intent.ACTION_OPEN_DOCUMENT_TREE), getting repeat URI use of
   the path & files from DocumentFile via
   DocumentFile.fromTreeUri(context, uri) for reading and writing to go
   with it for all the public storage use.

   Hope that helps.

   I'm just sending from a temporary email address. Don't reply as I
   won't get it. I'm not interested in back and forth :-)

I have faith that's a useful breadcrumb for RemoteServiceException.  I'm
not sure what the ACTION_OPEN_DOCUMENT_TREE part has to do with...I've
looked into that before and was unable to figure out a way to use that to
directly access the filesystem in a sensible fashion but maybe there is a
way to get a real unix path access from it, or maybe it has improved
somewhat since the last time I looked at it.  I probably won't be able to
make sense of that part until I am stuck with a phone that limits me and
I need to actually work through it.  Maybe when I set up an Android 12
emulator I will see what's up.


August 2, 2022.

Got a new phone, with Android 11.  SimpleSSHD seems to be a lot more
thoroughly unscheduled if it is in the background...I have to bring it to
the foreground manually to accept a connection, and if it's not a bulk
rsync then I need to stay in the foreground to even continue the existing
connection.

But just looking through Settings -> Addition settings -> Developer
options, I noticed "Suspend execution for cached apps".  I disabled it,
and now sshd is responsive all the time.  So that's something worth
sharing with the user.  But also, it might not even be necessary for the
user to do it:

   As a workaround, if an app has a process that needs to perform
   activities while cached, change the process status to non-cached (such
   as Bound ForeGround Service (BFGS) or foreground) before the process
   needs to do any work to allow the app to remain active.

I don't know what that means, but it seems like an indication that there
is perhaps some new / advanced "foreground service" mode.


August 22, 2022.

It's freezing it again today.  Here is it freezing it while it's executing
   $ while true; do date; sleep 1; date

 08-02 22:17:17.534 1926 4196 I OplusHansManager : freeze uid: 10278
   org.galexander.sshd pids: [6026, 5953, 5952, 5948, 5946, 3666, 3665,
   3614, 3568] scene: LcdOn
 08-02 22:17:19.540 8813 23721 D IHansComunication: HANS
   sendMessageToKernel: threadId = 540790373568, netLinkSetup = 1, type =
   FROZEN_TRANS, targetUid = 10278, pkgCmd = PKG_CMD_MAX
 08-02 22:19:27.124 1926 4197 I OplusHansManager : unfreeze uid: 10278
   org.galexander.sshd pids: [6026, 5953, 5952, 5948, 5946, 3666, 3665,
   3614, 3568] reason: AsyncBinder scene: LcdOn
 08-02 22:19:27.125 1926 4196 I OplusHansManager : uid=10278,
   pkg=org.galexander.sshd, transition from Frozen to Middle,
   reason=AsyncBinder
 08-02 22:19:27.128 1926 4197 I OplusHansManager : unfreeze uid: 10320
   org.galexander.soft84 pids: [31948] reason: AsyncBinder scene: LcdOn
 08-02 22:19:27.129 1926 4196 I OplusHansManager : uid=10320,
   pkg=org.galexander.soft84, transition from Frozen to Middle,
   reason=AsyncBinder
 08-02 22:19:27.130 1926 4197 I OplusHansManager : unfreeze uid: 10317
   org.galexander.bluntmp3 pids: [22587] reason: AsyncBinder scene: LcdOn
 08-02 22:19:27.131 1926 4196 I OplusHansManager : uid=10317,
   pkg=org.galexander.bluntmp3, transition from Frozen to Middle,
   reason=AsyncBinder
 08-02 22:19:37.147 1926 4196 I OplusHansManager : freeze uid: 10278
   org.galexander.sshd pids: [6195, 5953, 5952, 5948, 5946, 3666, 3665,
   3614, 3568] scene: LcdOn
 08-02 22:19:37.157 1926 4196 I OplusHansManager : freeze uid: 10320
   org.galexander.soft84 pids: [31948] scene: LcdOn
 08-02 22:19:37.163 1926 4196 I OplusHansManager : freeze uid: 10317
   org.galexander.bluntmp3 pids: [22587] scene: LcdOn
 08-02 22:19:39.155 8813 23721 D IHansComunication: HANS
   sendMessageToKernel: threadId = 540790373568, netLinkSetup = 1, type =
   FROZEN_TRANS, targetUid = 10278, pkgCmd = PKG_CMD_MAX
 08-02 22:19:39.161 8813 8835 D IHansComunication: HANS
   sendMessageToKernel: threadId = 540790373568, netLinkSetup = 1, type =
   FROZEN_TRANS, targetUid = 10320, pkgCmd = PKG_CMD_MAX
 08-02 22:19:39.165 8813 8835 D IHansComunication: HANS
   sendMessageToKernel: threadId = 540790373568, netLinkSetup = 1, type =
   FROZEN_TRANS, targetUid = 10317, pkgCmd = PKG_CMD_MAX

So it decides to freeze it after a while, and then unfreezes it
"reason=AsyncBinder" every now and then for about 10 seconds at a time.

The two processes involved:
   system         1926    841 13580368 523424 0           0 S system_server
   system         8813      1 2182528   1084 0            0 S hans

I'm trying to see if system_server, at least, might be part of their open
source package.  It doesn't look like it.  I started downloading their
repo but it's almost entirely AOSP, and the parts they provide (at least
/usr/src/oneplus/android_system_core/) don't seem to be very useful.

I made a copy of its /system in ~/mole/system, and it looks like the
following .jar files in framework/ all reference Hans something:
   ext.jar
   framework.jar
   oplus-framework.jar
   oplus-internal-services.jar
   oplus-services.jar
   service-jobscheduler.jar
   services.jar

So that's a lead for now.


August 6, 2022.

I noticed that for the past couple days, write access to /sdcard has gone
away!  I felt like I was being gaslit, because I was sure it had worked.
Turns out, I had accidentally disabled write access in SimpleSSHD while I
was working on NGN!  Oh!  The human capacity for error.  So I am still
able to write into /sdcard on a decently modern phone and that is a huge
reassurance about the possible future of SimpleSSHD on Android!

Anyways, when I restored write access, I re-installed the app and got to
see something which might substitute for start-on-boot failing:

 08-06 17:45:17.415 4694 4694 I NotificationBackend: onReceive package
   intent= Intent { act=android.intent.action.PACKAGE_REPLACED
   dat=package:org.galexander.sshd flg=0x4000010 (has extras) }
  ...
 08-06 17:45:17.834 1878 2105 W BroadcastQueue: Background execution not
   allowed: receiving Intent { act=android.intent.action.PACKAGE_ADDED
   dat=package:org.galexander.sshd flg=0x4000010 (has extras) } to
   com.google.android.packageinstaller/com.android.packageinstaller.Packa
   ge InstalledReceiver
  ...
 08-06 17:45:17.880 1878 2105 W BroadcastQueue: Background execution not
   allowed: receiving Intent { act=android.intent.action.PACKAGE_REPLACED
   dat=package:org.galexander.sshd flg=0x4000010 (has extras) } to
   com.google.android.gms/.gass.chimera.PackageChangeBroadcastReceiver

It's probably not interesting but I was surprised to see that each of the
BroadcastQueue errors repeated 5x in the log, as if it was expected to
succeed.

I was expecting the problem to be that the broadcast receiver was
triggering but wasn't allowed to spawn a foreground service or something
like that, but it looks like the receiver is rejected much earlier.
stackoverflow confirms that people are getting the same problem with
BOOT_COMPLETED, and that it doesn't call BroadcastReceiver.onReceive() at
all!

There's a suggestion that it needs to register the receivers using
context.registerReceiver(new BroadcastReceiver(...), new IntentFilter(...))
That seems crazy.

It is apparently this:

https://developer.android.com/about/versions/oreo/background#broadcasts

Which I thought I already dealt with in order to receive BOOT_RECEIVER in
the first place (since I've already been using it under Oreo, version
26), but really I think what I'm running into is just that it's no longer
"grandfathered in" if you declare minSdkVersion 17.

Anyways, the google doc supports the hack of registering the receivers in
code instead of using AndroidManifest, which is just crazy.

OTOH, MY_PACKAGE_REPLACED is specifically supposed to be allowed in the
new regime (it is not "implicit" because it has an explicit target)!  And
there's no reference to MY_PACKAGE_REPLACED in the logcat.
ACTION_MY_PACKAGE_REPLACED has been part of android.content.intent since
API 12.

Maybe it's upset seeing both MY_PACKAGE_REPLACE and BOOT_COMPLETED in the
same broadcast receiver in the XML??


XXX - try MANAGE_EXTERNAL_STORAGE permission -> ACTION_MANAGE_ALL_FILES_ACCESS_PERMISSION intent action, will that help??

XXX - why is it 100% starved of foreground service cpu time, unless it happens to have been running when i switched away from the app
XXX - why won't it start on boot?


XXX - message about can't do background service on oreo should say oreo or later

XXX - for Jose Miguel, script to run when user clicks 'start' or even when IP changes?  to like use curl to notify about a dynamic IP..

XXX - update rsync version for Michael H

XXX - --remove-source-files rsync deleting doesn't work?  is unlink() failing or is it trying something else first that fails?

XXX - see if i can reproduce android 11 problem with executing files in app-private
XXX - see if /data/user_de/0/org.galexander.sshd bypasses it on the emulator??
XXX - try busybox on android TV again, try putting the binary in "native libs" and sharing it from there
XXX - use linker hack instead of execve?  supposedly you can "/lib/ld-linux.so.2 /bin/echo"

XXX - crash.20200109
XXX - on android 6 (duckling moto g2), the notification is white-on-white?
XXX - test Settings and Notifications colors in Pie (or Quiche?) "dark mode" for Alexander Chobot, and for Fionn Behrens (https://developer.android.com/guide/topics/ui/look-and-feel/darktheme)
XXX - if the unlink(authorized_keys) fails, or if the open() fails for permission reasons, generate a Toast for the user. (confirmed that restorecon -F authorized_keys works)
XXX - why doesn't "ssh -R 2223:192.168.1.254:80 mouse" work?

XXX - when i am forced to upgrade to SDK 30, request MANAGE_EXTERNAL_STORAGE permission
XXX - Vitalii suggests giving an error message for unrecognized key types (ed25519) that are encountered in authorized_keys, so the user doesn't have to stab in the dark
XXX - ability to dynamically request <uses-permission-sdk-23 android:name="android.permission.SEND_SMS" /> (and if that's dynamic, could we make the install app permission also dynamic??)

XXX - figure out how to force a screen refresh on eink devices (onyx boox) when the password is displayed (Roman)
XXX - Tasker on Android 9 can't trigger the new START/STOP intents? (Kumaran)

--- new release

XXX - libiconv? HAVE_ICONV_H etc