arno/pi-hole
1
0
Fork 0
mirror of https://github.com/pi-hole/pi-hole synced 2024-11-18 14:18:15 +00:00
Code Issues Releases Wiki Activity
63312ac4b8
pi-hole/automated install/basic-install.sh
Mausy5043 63312ac4b8 removed duplicate word
2017-11-05 10:18:39 +01:00

2126 lines
77 KiB
Bash
Executable File
Raw Blame History

#!/usr/bin/env bash
# shellcheck disable=SC1090
# Pi-hole: A black hole for Internet advertisements
# (c) 2017 Pi-hole, LLC (https://pi-hole.net)
# Network-wide ad blocking via your own hardware.
#
# Installs and Updates Pi-hole
#
# This file is copyright under the latest version of the EUPL.
# Please see LICENSE file for your rights under this license.
# pi-hole.net/donate
#
# Install with this command (from your Linux machine):
#
# curl -L install.pi-hole.net | bash
# -e option instructs bash to immediately exit if any command [1] has a non-zero exit status
# We do not want users to end up with a partially working install, so we exit the script
# instead of continuing the installation with something broken
set -e
######## VARIABLES #########
# For better maintainability, we store as much information that can change in variables
# This allows us to make a change in one place that can propogate to all instances of the variable
# These variables should all be GLOBAL variables, written in CAPS
# Local variables will be in lowercase and will exist only within functions
# It's still a work in progress, so you may see some variance in this guideline until it is complete
# We write to a temporary file before moving the log to the pihole folder
tmpLog=/tmp/pihole-install.log
instalLogLoc=/etc/pihole/install.log
# This is an important file as it contains information specific to the machine it's being installed on
setupVars=/etc/pihole/setupVars.conf
# Pi-hole uses lighttpd as a Web server, and this is the config file for it
# shellcheck disable=SC2034
lighttpdConfig=/etc/lighttpd/lighttpd.conf
# This is a file used for the colorized output
coltable=/opt/pihole/COL_TABLE
# We store several other folders and
webInterfaceGitUrl="https://github.com/pi-hole/AdminLTE.git"
webInterfaceDir="/var/www/html/admin"
piholeGitUrl="https://github.com/pi-hole/pi-hole.git"
PI_HOLE_LOCAL_REPO="/etc/.pihole"
# These are the names of piholes files, stored in an array
PI_HOLE_FILES=(chronometer list piholeDebug piholeLogFlush setupLCD update version gravity uninstall webpage)
# This folder is where the Pi-hole scripts will be installed
PI_HOLE_INSTALL_DIR="/opt/pihole"
useUpdateVars=false
# Pi-hole needs an IP address; to begin, these variables are empty since we don't know what the IP is until
# this script can run
IPV4_ADDRESS=""
IPV6_ADDRESS=""
# By default, query logging is enabled and the dashboard is set to be installed
QUERY_LOGGING=true
INSTALL_WEB=true
# Find the rows and columns will default to 80x24 if it can not be detected
screen_size=$(stty size 2>/dev/null || echo 24 80)
rows=$(echo "${screen_size}" | awk '{print $1}')
columns=$(echo "${screen_size}" | awk '{print $2}')
# Divide by two so the dialogs take up half of the screen, which looks nice.
r=$(( rows / 2 ))
c=$(( columns / 2 ))
# Unless the screen is tiny
r=$(( r < 20 ? 20 : r ))
c=$(( c < 70 ? 70 : c ))
######## Undocumented Flags. Shhh ########
# These are undocumented flags; some of which we can use when repairing an installation
# The runUnattended flag is one example of this
skipSpaceCheck=false
reconfigure=false
runUnattended=false
# If the color table file exists,
if [[ -f "${coltable}" ]]; then
# source it
source ${coltable}
# Othwerise,
else
# Set these values so the installer can still run in color
COL_NC='\e[0m' # No Color
COL_LIGHT_GREEN='\e[1;32m'
COL_LIGHT_RED='\e[1;31m'
TICK="[${COL_LIGHT_GREEN}✓${COL_NC}]"
CROSS="[${COL_LIGHT_RED}✗${COL_NC}]"
INFO="[i]"
# shellcheck disable=SC2034
DONE="${COL_LIGHT_GREEN} done!${COL_NC}"
OVER="\\r\\033[K"
fi
# A simple function that just echoes out our logo in ASCII format
# This lets users know that it is a Pi-hole, LLC product
show_ascii_berry() {
echo -e "
${COL_LIGHT_GREEN}.;;,.
.ccccc:,.
:cccclll:. ..,,
:ccccclll. ;ooodc
'ccll:;ll .oooodc
.;cll.;;looo:.
${COL_LIGHT_RED}.. ','.
.',,,,,,'.
.',,,,,,,,,,.
.',,,,,,,,,,,,....
....''',,,,,,,'.......
......... .... .........
.......... ..........
.......... ..........
......... .... .........
........,,,,,,,'......
....',,,,,,,,,,,,.
.',,,,,,,,,'.
.',,,,,,'.
..'''.${COL_NC}
"
}
# Compatibility
distro_check() {
# If apt-get is installed, then we know it's part of the Debian family
if command -v apt-get &> /dev/null; then
# Set some global variables here
# We don't set them earlier since the family might be Red Hat, so these values would be different
PKG_MANAGER="apt-get"
# A variable to store the command used to update the package cache
UPDATE_PKG_CACHE="${PKG_MANAGER} update"
# An array for something...
PKG_INSTALL=(${PKG_MANAGER} --yes --no-install-recommends install)
# grep -c will return 1 retVal on 0 matches, block this throwing the set -e with an OR TRUE
PKG_COUNT="${PKG_MANAGER} -s -o Debug::NoLocking=true upgrade | grep -c ^Inst || true"
# Some distros vary slightly so these fixes for dependencies may apply
# Debian 7 doesn't have iproute2 so if the dry run install is successful,
if ${PKG_MANAGER} install --dry-run iproute2 > /dev/null 2>&1; then
# we can install it
iproute_pkg="iproute2"
# Otherwise,
else
# use iproute
iproute_pkg="iproute"
fi
# We prefer the php metapackage if it's there
if ${PKG_MANAGER} install --dry-run php > /dev/null 2>&1; then
phpVer="php"
# If not,
else
# fall back on the php5 packages
phpVer="php5"
fi
# We also need the correct version for `php-sqlite` (which differs across distros)
if ${PKG_MANAGER} install --dry-run ${phpVer}-sqlite3 > /dev/null 2>&1; then
phpSqlite="sqlite3"
else
phpSqlite="sqlite"
fi
# Since our install script is so large, we need several other programs to successfuly get a machine provisioned
# These programs are stored in an array so they can be looped through later
INSTALLER_DEPS=(apt-utils dialog debconf dhcpcd5 git ${iproute_pkg} whiptail)
# Pi-hole itself has several dependencies that also need to be installed
PIHOLE_DEPS=(bc cron curl dnsmasq dnsutils iputils-ping lsof netcat sudo unzip wget idn2)
# The Web dashboard has some that also need to be installed
# It's useful to separate the two since our repos are also setup as "Core" code and "Web" code
PIHOLE_WEB_DEPS=(lighttpd ${phpVer}-common ${phpVer}-cgi ${phpVer}-${phpSqlite})
# The Web server user,
LIGHTTPD_USER="www-data"
# group,
LIGHTTPD_GROUP="www-data"
# and config file
LIGHTTPD_CFG="lighttpd.conf.debian"
# The DNS server user
DNSMASQ_USER="dnsmasq"
# A function to check...
test_dpkg_lock() {
# An iterator used for counting loop iterations
i=0
# fuser is a program to show which processes use the named files, sockets, or filesystems
# So while the command is true
while fuser /var/lib/dpkg/lock >/dev/null 2>&1 ; do
# Wait half a second
sleep 0.5
# and increase the iterator
((i=i+1))
done
# Always return success, since we only return if there is no
# lock (anymore)
return 0
}
# If apt-get is not found, check for rpm to see if it's a Red Hat family OS
elif command -v rpm &> /dev/null; then
# Then check if dnf or yum is the package manager
if command -v dnf &> /dev/null; then
PKG_MANAGER="dnf"
else
PKG_MANAGER="yum"
fi
# Fedora and family update cache on every PKG_INSTALL call, no need for a separate update.
UPDATE_PKG_CACHE=":"
PKG_INSTALL=(${PKG_MANAGER} install -y)
PKG_COUNT="${PKG_MANAGER} check-update | egrep '(.i686|.x86|.noarch|.arm|.src)' | wc -l"
INSTALLER_DEPS=(dialog git iproute net-tools newt procps-ng)
PIHOLE_DEPS=(bc bind-utils cronie curl dnsmasq findutils nmap-ncat sudo unzip wget idn2)
PIHOLE_WEB_DEPS=(lighttpd lighttpd-fastcgi php php-common php-cli php-pdo)
if ! grep -q 'Fedora' /etc/redhat-release; then
INSTALLER_DEPS=("${INSTALLER_DEPS[@]}" "epel-release");
fi
LIGHTTPD_USER="lighttpd"
LIGHTTPD_GROUP="lighttpd"
LIGHTTPD_CFG="lighttpd.conf.fedora"
DNSMASQ_USER="nobody"
# If neither apt-get or rmp/dnf are found
else
# it's not an OS we can support,
echo -e " ${CROSS} OS distribution not supported"
# so exit the installer
exit
fi
}
# A function for checking if a folder is a git repository
is_repo() {
# Use a named, local variable instead of the vague $1, which is the first arguement passed to this function
# These local variables should always be lowercase
local directory="${1}"
# A local variable for the current directory
local curdir
# A variable to store the return code
local rc
# Assign the current directory variable by using pwd
curdir="${PWD}"
# If the first argument passed to this function is a directory,
if [[ -d "${directory}" ]]; then
# move into the directory
cd "${directory}"
# Use git to check if the folder is a repo
# git -C is not used here to support git versions older than 1.8.4
git status --short &> /dev/null || rc=$?
# If the command was not successful,
else
# Set a non-zero return code if directory does not exist
rc=1
fi
# Move back into the directory the user started in
cd "${curdir}"
# Return the code; if one is not set, return 0
return "${rc:-0}"
}
# A function to clone a repo
make_repo() {
# Set named variables for better readability
local directory="${1}"
local remoteRepo="${2}"
# The message to display when this function is running
str="Clone ${remoteRepo} into ${directory}"
# Display the message and use the color table to preface the message with an "info" indicator
echo -ne " ${INFO} ${str}..."
# If the directory exists,
if [[ -d "${directory}" ]]; then
# delete everything in it so git can clone into it
rm -rf "${directory}"
fi
# Clone the repo and return the return code from this command
git clone -q --depth 1 "${remoteRepo}" "${directory}" &> /dev/null || return $?
# Show a colored message showing it's status
echo -e "${OVER} ${TICK} ${str}"
# Always return 0? Not sure this is correct
return 0
}
# We need to make sure the repos are up-to-date so we can effectively install Clean out the directory if it exists for git to clone into
update_repo() {
# Use named, local variables
# As you can see, these are the same variable names used in the last function,
# but since they are local, their scope does not go beyond this function
# This helps prevent the wrong value from being assigned if you were to set the variable as a GLOBAL one
local directory="${1}"
local curdir
# A variable to store the message we want to display;
# Again, it's useful to store these in variables in case we need to reuse or change the message;
# we only need to make one change here
local str="Update repo in ${1}"
# Make sure we know what directory we are in so we can move back into it
curdir="${PWD}"
# Move into the directory that was passed as an argument
cd "${directory}" &> /dev/null || return 1
# Let the user know what's happening
echo -ne " ${INFO} ${str}..."
# Stash any local commits as they conflict with our working code
git stash --all --quiet &> /dev/null || true # Okay for stash failure
git clean --quiet --force -d || true # Okay for already clean directory
# Pull the latest commits
git pull --quiet &> /dev/null || return $?
# Show a completion message
echo -e "${OVER} ${TICK} ${str}"
# Move back into the oiginal directory
cd "${curdir}" &> /dev/null || return 1
return 0
}
# A function that combines the functions previously made
getGitFiles() {
# Setup named variables for the git repos
# We need the directory
local directory="${1}"
# as well as the repo URL
local remoteRepo="${2}"
# A local varible containing the message to be displayed
local str="Check for existing repository in ${1}"
# Show the message
echo -ne " ${INFO} ${str}..."
# Check if the directory is a repository
if is_repo "${directory}"; then
# Show that we're checking it
echo -e "${OVER} ${TICK} ${str}"
# Update the repo, returning an error message on failure
update_repo "${directory}" || { echo -e "\\n ${COL_LIGHT_RED}Error: Could not update local repository. Contact support.${COL_NC}"; exit 1; }
# If it's not a .git repo,
else
# Show an error
echo -e "${OVER} ${CROSS} ${str}"
# Attempt to make the repository, showing an error on falure
make_repo "${directory}" "${remoteRepo}" || { echo -e "\\n ${COL_LIGHT_RED}Error: Could not update local repository. Contact support.${COL_NC}"; exit 1; }
fi
# echo a blank line
echo ""
# and return success?
return 0
}
# Reset a repo to get rid of any local changed
resetRepo() {
# Use named varibles for arguments
local directory="${1}"
# Move into the directory
cd "${directory}" &> /dev/null || return 1
# Store the message in a varible
str="Resetting repository within ${1}..."
# Show the message
echo -ne " ${INFO} ${str}"
# Use git to remove the local changes
git reset --hard &> /dev/null || return $?
# And show the status
echo -e "${OVER} ${TICK} ${str}"
# Returning success anyway?
return 0
}
# We need to know the IPv4 information so we can effectively setup the DNS server
# Without this information, we won't know where to Pi-hole will be found
find_IPv4_information() {
# Named, local variables
local route
# Find IP used to route to outside world by checking the the route to Google's public DNS server
route=$(ip route get 8.8.8.8)
# Use awk to strip out just the interface device as it is used in future commands
IPv4dev=$(awk '{for (i=1; i<=NF; i++) if ($i~/dev/) print $(i+1)}' <<< "${route}")
# Get just the IP address
IPv4bare=$(awk '{print $7}' <<< "${route}")
# Append the CIDR notation to the IP address
IPV4_ADDRESS=$(ip -o -f inet addr show | grep "${IPv4bare}" | awk '{print $4}' | awk 'END {print}')
# Get the default gateway (the way to reach the Internet)
IPv4gw=$(awk '{print $3}' <<< "${route}")
}
# Get available interfaces that are UP
get_available_interfaces() {
# There may be more than one so it's all stored in a variable
availableInterfaces=$(ip --oneline link show up | grep -v "lo" | awk '{print $2}' | cut -d':' -f1 | cut -d'@' -f1)
}
# A function for displaying the dialogs the user sees when first running the installer
welcomeDialogs() {
# Display the welcome dialog using an approriately sized window via the calculation conducted earlier in the script
whiptail --msgbox --backtitle "Welcome" --title "Pi-hole automated installer" "\\n\\nThis installer will transform your device into a network-wide ad blocker!" ${r} ${c}
# Request that users donate if they enjoy the software since we all work on it in our free time
whiptail --msgbox --backtitle "Plea" --title "Free and open source" "\\n\\nThe Pi-hole is free, but powered by your donations: http://pi-hole.net/donate" ${r} ${c}
# Explain the need for a static address
whiptail --msgbox --backtitle "Initiating network interface" --title "Static IP Needed" "\\n\\nThe Pi-hole is a SERVER so it needs a STATIC IP ADDRESS to function properly.
In the next section, you can choose to use your current network settings (DHCP) or to manually edit them." ${r} ${c}
}
# We need to make sure there is enough space before installing, so there is a function to check this
verifyFreeDiskSpace() {
# 50MB is the minimum space needed (45MB install (includes web admin bootstrap/jquery libraries etc) + 5MB one day of logs.)
# - Fourdee: Local ensures the variable is only created, and accessible within this function/void. Generally considered a "good" coding practice for non-global variables.
local str="Disk space check"
# Reqired space in KB
local required_free_kilobytes=51200
# Calculate existing free space on this machine
local existing_free_kilobytes
existing_free_kilobytes=$(df -Pk | grep -m1 '\/$' | awk '{print $4}')
# If the existing space is not an integer,
if ! [[ "${existing_free_kilobytes}" =~ ^([0-9])+$ ]]; then
# show an error that we can't determine the free space
echo -e " ${CROSS} ${str}
Unknown free disk space!
We were unable to determine available free disk space on this system.
You may override this check, however, it is not recommended
The option '${COL_LIGHT_RED}--i_do_not_follow_recommendations${COL_NC}' can override this
e.g: curl -L https://install.pi-hole.net | bash /dev/stdin ${COL_LIGHT_RED}<option>${COL_NC}"
# exit with an error code
exit 1
# If there is insufficient free disk space,
elif [[ "${existing_free_kilobytes}" -lt "${required_free_kilobytes}" ]]; then
# show an error message
echo -e " ${CROSS} ${str}
Your system disk appears to only have ${existing_free_kilobytes} KB free
It is recommended to have a minimum of ${required_free_kilobytes} KB to run the Pi-hole"
# if the vcgencmd command exists,
if command -v vcgencmd &> /dev/null; then
# it's probably a Raspbian install, so show a message about expanding the filesystem
echo " If this is a new install you may need to expand your disk
Run 'sudo raspi-config', and choose the 'expand file system' option
After rebooting, run this installation again
e.g: curl -L https://install.pi-hole.net | bash"
fi
# Show there is not enough free space
echo -e "\\n ${COL_LIGHT_RED}Insufficient free space, exiting...${COL_NC}"
# and exit with an error
exit 1
# Otherwise,
else
# Show that we're running a disk space check
echo -e " ${TICK} ${str}"
fi
}
# A function that let's the user pick an interface to use with Pi-hole
chooseInterface() {
# Turn the available interfaces into an array so it can be used with a whiptail dialog
local interfacesArray=()
# Number of available interfaces
local interfaceCount
# Whiptail variable storage
local chooseInterfaceCmd
# Temporary Whiptail options storage
local chooseInterfaceOptions
# Loop sentinel variable
local firstLoop=1
# Find out how many interfaces are available to choose from
interfaceCount=$(echo "${availableInterfaces}" | wc -l)
# If there is one interface,
if [[ "${interfaceCount}" -eq 1 ]]; then
# Set it as the interface to use since there is no other option
PIHOLE_INTERFACE="${availableInterfaces}"
# Otherwise,
else
# While reading through the available interfaces
while read -r line; do
# use a variable to set the option as OFF to begin with
mode="OFF"
# If it's the first loop,
if [[ "${firstLoop}" -eq 1 ]]; then
# set this as the interface to use (ON)
firstLoop=0
mode="ON"
fi
# Put all these interfaces into an array
interfacesArray+=("${line}" "available" "${mode}")
# Feed the available interfaces into this while loop
done <<< "${availableInterfaces}"
# The whiptail command that will be run, stored in a variable
chooseInterfaceCmd=(whiptail --separate-output --radiolist "Choose An Interface (press space to select)" ${r} ${c} ${interfaceCount})
# Now run the command using the interfaces saved into the array
chooseInterfaceOptions=$("${chooseInterfaceCmd[@]}" "${interfacesArray[@]}" 2>&1 >/dev/tty) || \
# If the user chooses Canel, exit
{ echo -e " ${COL_LIGHT_RED}Cancel was selected, exiting installer${COL_NC}"; exit 1; }
# For each interface
for desiredInterface in ${chooseInterfaceOptions}; do
# Set the one the user selected as the interface to use
PIHOLE_INTERFACE=${desiredInterface}
# and show this information to the user
echo -e " ${INFO} Using interface: $PIHOLE_INTERFACE"
done
fi
}
# This lets us prefer ULA addresses over GUA
# This caused problems for some users when their ISP changed their IPv6 addresses
# See https://github.com/pi-hole/pi-hole/issues/1473#issuecomment-301745953
testIPv6() {
# first will contain fda2 (ULA)
first="$(cut -f1 -d":" <<< "$1")"
# value1 will contain 253 which is the decimal value corresponding to 0xfd
value1=$(((0x$first)/256))
# will contain 162 which is the decimal value corresponding to 0xa2
value2=$(((0x$first)%256))
# the ULA test is testing for fc00::/7 according to RFC 4193
(((value1&254)==252)) && echo "ULA" || true
# the GUA test is testing for 2000::/3 according to RFC 4291
(((value1&112)==32)) && echo "GUA" || true
# the LL test is testing for fe80::/10 according to RFC 4193
(((value1==254) && ((value2&192)==128))) && echo "Link-local" || true
}
# A dialog for showing the user about IPv6 blocking
useIPv6dialog() {
# Determine the IPv6 address used for blocking
IPV6_ADDRESSES=($(ip -6 address | grep 'scope global' | awk '{print $2}'))
# For each address in the array above, determine the type of IPv6 address it is
for i in "${IPV6_ADDRESSES[@]}"; do
# Check if it's ULA, GUA, or LL by using the function created earlier
result=$(testIPv6 "$i")
# If it's a ULA address, use it and store it as a global variable
[[ "${result}" == "ULA" ]] && ULA_ADDRESS="${i%/*}"
# If it's a GUA address, we can still use it si store it as a global variable
[[ "${result}" == "GUA" ]] && GUA_ADDRESS="${i%/*}"
done
# Determine which address to be used: Prefer ULA over GUA or don't use any if none found
# If the ULA_ADDRESS contains a value,
if [[ ! -z "${ULA_ADDRESS}" ]]; then
# set the IPv6 address to the ULA address
IPV6_ADDRESS="${ULA_ADDRESS}"
# Show this info to the user
echo -e " ${INFO} Found IPv6 ULA address, using it for blocking IPv6 ads"
# Otherwise, if the GUA_ADDRESS has a value,
elif [[ ! -z "${GUA_ADDRESS}" ]]; then
# Let the user know
echo -e " ${INFO} Found IPv6 GUA address, using it for blocking IPv6 ads"
# And assign it to the global variable
IPV6_ADDRESS="${GUA_ADDRESS}"
# If none of those work,
else
# explain that IPv6 blocking will not be used
echo -e " ${INFO} Unable to find IPv6 ULA/GUA address, IPv6 adblocking will not be enabled"
# So set the variable to be empty
IPV6_ADDRESS=""
fi
# If the IPV6_ADDRESS contains a value
if [[ ! -z "${IPV6_ADDRESS}" ]]; then
# Display that IPv6 is supported and will be used
whiptail --msgbox --backtitle "IPv6..." --title "IPv6 Supported" "$IPV6_ADDRESS will be used to block ads." ${r} ${c}
fi
}
# A function to check if we should use IPv4 and/or IPv6 for blocking ads
use4andor6() {
# Named local variables
local useIPv4
local useIPv6
# Let use select IPv4 and/or IPv6 via a checklist
cmd=(whiptail --separate-output --checklist "Select Protocols (press space to select)" ${r} ${c} 2)
# In an array, show the options available:
# IPv4 (on by default)
options=(IPv4 "Block ads over IPv4" on
# or IPv6 (on by default if available)
IPv6 "Block ads over IPv6" on)
# In a variable, show the choices available; exit if Cancel is selected
choices=$("${cmd[@]}" "${options[@]}" 2>&1 >/dev/tty) || { echo -e " ${COL_LIGHT_RED}Cancel was selected, exiting installer${COL_NC}"; exit 1; }
# For each choice available,
for choice in ${choices}
do
# Set the values to true
case ${choice} in
IPv4 ) useIPv4=true;;
IPv6 ) useIPv6=true;;
esac
done
# If IPv4 is to be used,
if [[ "${useIPv4}" ]]; then
# Run our function to get the information we need
find_IPv4_information
getStaticIPv4Settings
setStaticIPv4
fi
# If IPv6 is to be used,
if [[ "${useIPv6}" ]]; then
# Run our function to get this information
useIPv6dialog
fi
# Echo the information to the user
echo -e " ${INFO} IPv4 address: ${IPV4_ADDRESS}"
echo -e " ${INFO} IPv6 address: ${IPV6_ADDRESS}"
# If neither protocol is selected,
if [[ ! "${useIPv4}" ]] && [[ ! "${useIPv6}" ]]; then
# Show an error in red
echo -e " ${COL_LIGHT_RED}Error: Neither IPv4 or IPv6 selected${COL_NC}"
# and exit with an error
exit 1
fi
}
#
getStaticIPv4Settings() {
# Local, named variables
local ipSettingsCorrect
# Ask if the user wants to use DHCP settings as their static IP
# This is useful for users that are using DHCP reservations; then we can just use the information gathered via our functions
if whiptail --backtitle "Calibrating network interface" --title "Static IP Address" --yesno "Do you want to use your current network settings as a static address?
IP address: ${IPV4_ADDRESS}
Gateway: ${IPv4gw}" ${r} ${c}; then
# If they choose yes, let the user know that the IP address will not be available via DHCP and may cause a conflict.
whiptail --msgbox --backtitle "IP information" --title "FYI: IP Conflict" "It is possible your router could still try to assign this IP to a device, which would cause a conflict. But in most cases the router is smart enough to not do that.
If you are worried, either manually set the address, or modify the DHCP reservation pool so it does not include the IP you want.
It is also possible to use a DHCP reservation, but if you are going to do that, you might as well set a static address." ${r} ${c}
# Nothing else to do since the variables are already set above
else
# Otherwise, we need to ask the user to input their desired settings.
# Start by getting the IPv4 address (pre-filling it with info gathered from DHCP)
# Start a loop to let the user enter their information with the chance to go back and edit it if necessary
until [[ "${ipSettingsCorrect}" = True ]]; do
# Ask for the IPv4 address
IPV4_ADDRESS=$(whiptail --backtitle "Calibrating network interface" --title "IPv4 address" --inputbox "Enter your desired IPv4 address" ${r} ${c} "${IPV4_ADDRESS}" 3>&1 1>&2 2>&3) || \
# Cancelling IPv4 settings window
{ ipSettingsCorrect=False; echo -e " ${COL_LIGHT_RED}Cancel was selected, exiting installer${COL_NC}"; exit 1; }
echo -e " ${INFO} Your static IPv4 address: ${IPV4_ADDRESS}"
# Ask for the gateway
IPv4gw=$(whiptail --backtitle "Calibrating network interface" --title "IPv4 gateway (router)" --inputbox "Enter your desired IPv4 default gateway" ${r} ${c} "${IPv4gw}" 3>&1 1>&2 2>&3) || \
# Cancelling gateway settings window
{ ipSettingsCorrect=False; echo -e " ${COL_LIGHT_RED}Cancel was selected, exiting installer${COL_NC}"; exit 1; }
echo -e " ${INFO} Your static IPv4 gateway: ${IPv4gw}"
# Give the user a chance to review their settings before moving on
if whiptail --backtitle "Calibrating network interface" --title "Static IP Address" --yesno "Are these settings correct?
IP address: ${IPV4_ADDRESS}
Gateway: ${IPv4gw}" ${r} ${c}; then
# After that's done, the loop ends and we move on
ipSettingsCorrect=True
else
# If the settings are wrong, the loop continues
ipSettingsCorrect=False
fi
done
# End the if statement for DHCP vs. static
fi
}
# dhcpcd is very annoying,
setDHCPCD() {
# but we can append these lines to dhcpcd.conf to enable a static IP
echo "interface ${PIHOLE_INTERFACE}
static ip_address=${IPV4_ADDRESS}
static routers=${IPv4gw}
static domain_name_servers=127.0.0.1" | tee -a /etc/dhcpcd.conf >/dev/null
}
setStaticIPv4() {
# Local, named variables
local IFCFG_FILE
local IPADDR
local CIDR
# For the Debian family, if dhcpcd.conf exists,
if [[ -f "/etc/dhcpcd.conf" ]]; then
# check if the IP is already in the file
if grep -q "${IPV4_ADDRESS}" /etc/dhcpcd.conf; then
echo -e " ${INFO} Static IP already configured"
# If it's not,
else
# set it using our function
setDHCPCD
# Then use the ip command to immediately set the new address
ip addr replace dev "${PIHOLE_INTERFACE}" "${IPV4_ADDRESS}"
# Also give a warning that the user may need to reboot their system
echo -e " ${TICK} Set IP address to ${IPV4_ADDRESS%/*}
You may need to restart after the install is complete"
fi
# If it's not Debian, check if it's the Fedora family by checking for the file below
elif [[ -f "/etc/sysconfig/network-scripts/ifcfg-${PIHOLE_INTERFACE}" ]];then
# If it exists,
IFCFG_FILE=/etc/sysconfig/network-scripts/ifcfg-${PIHOLE_INTERFACE}
# check if the desired IP is already set
if grep -q "${IPV4_ADDRESS}" "${IFCFG_FILE}"; then
echo -e " ${INFO} Static IP already configured"
# Otherwise,
else
# Put the IP in variables without the CIDR notation
IPADDR=$(echo "${IPV4_ADDRESS}" | cut -f1 -d/)
CIDR=$(echo "${IPV4_ADDRESS}" | cut -f2 -d/)
# Backup existing interface configuration:
cp "${IFCFG_FILE}" "${IFCFG_FILE}".pihole.orig
# Build Interface configuration file using the GLOBAL variables we have
{
echo "# Configured via Pi-hole installer"
echo "DEVICE=$PIHOLE_INTERFACE"
echo "BOOTPROTO=none"
echo "ONBOOT=yes"
echo "IPADDR=$IPADDR"
echo "PREFIX=$CIDR"
echo "GATEWAY=$IPv4gw"
echo "DNS1=$PIHOLE_DNS_1"
echo "DNS2=$PIHOLE_DNS_2"
echo "USERCTL=no"
}> "${IFCFG_FILE}"
# Use ip to immediately set the new address
ip addr replace dev "${PIHOLE_INTERFACE}" "${IPV4_ADDRESS}"
# If NetworkMangler command line interface exists,
if command -v nmcli &> /dev/null;then
# Tell NetworkManagler to read our new sysconfig file
nmcli con load "${IFCFG_FILE}" > /dev/null
fi
# Show a warning that the user may need to restart
echo -e " ${TICK} Set IP address to ${IPV4_ADDRESS%/*}
You may need to restart after the install is complete"
fi
# If all that fails,
else
# show an error and exit
echo -e " ${INFO} Warning: Unable to locate configuration file to set static IPv4 address"
exit 1
fi
}
# Check an IP address to see if it is a valid one
valid_ip() {
# Local, named variables
local ip=${1}
local stat=1
# If the IP matches the format xxx.xxx.xxx.xxx,
if [[ "${ip}" =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]; then
# Save the old Interfal Field Separator in a variable
OIFS=$IFS
# and set the new one to a dot (period)
IFS='.'
# Put the IP into an array
ip=(${ip})
# Restore the IFS to what it was
IFS=${OIFS}
## Evaluate each octet by checking if it's less than or equal to 255 (the max for each octet)
[[ "${ip[0]}" -le 255 && "${ip[1]}" -le 255 \
&& "${ip[2]}" -le 255 && "${ip[3]}" -le 255 ]]
# Save the exit code
stat=$?
fi
# Return the exit code
return ${stat}
}
# A function to choose the upstream DNS provider(s)
setDNS() {
# Local, named variables
local DNSSettingsCorrect
# In an array, list the available upstream providers
DNSChooseOptions=(Google ""
OpenDNS ""
Level3 ""
Norton ""
Comodo ""
DNSWatch ""
Custom "")
# In a whiptail dialog, show the options
DNSchoices=$(whiptail --separate-output --menu "Select Upstream DNS Provider. To use your own, select Custom." ${r} ${c} 6 \
"${DNSChooseOptions[@]}" 2>&1 >/dev/tty) || \
# exit if Cancel is selected
{ echo -e " ${COL_LIGHT_RED}Cancel was selected, exiting installer${COL_NC}"; exit 1; }
# Display the selection
echo -ne " ${INFO} Using "
# Depending on the user's choice, set the GLOBAl variables to the IP of the respective provider
case ${DNSchoices} in
Google)
echo "Google DNS servers"
PIHOLE_DNS_1="8.8.8.8"
PIHOLE_DNS_2="8.8.4.4"
;;
OpenDNS)
echo "OpenDNS servers"
PIHOLE_DNS_1="208.67.222.222"
PIHOLE_DNS_2="208.67.220.220"
;;
Level3)
echo "Level3 servers"
PIHOLE_DNS_1="4.2.2.1"
PIHOLE_DNS_2="4.2.2.2"
;;
Norton)
echo "Norton ConnectSafe servers"
PIHOLE_DNS_1="199.85.126.10"
PIHOLE_DNS_2="199.85.127.10"
;;
Comodo)
echo "Comodo Secure servers"
PIHOLE_DNS_1="8.26.56.26"
PIHOLE_DNS_2="8.20.247.20"
;;
DNSWatch)
echo "DNS.WATCH servers"
PIHOLE_DNS_1="84.200.69.80"
PIHOLE_DNS_2="84.200.70.40"
;;
Custom)
# Until the DNS settings are selected,
until [[ "${DNSSettingsCorrect}" = True ]]; do
#
strInvalid="Invalid"
# If the first
if [[ ! "${PIHOLE_DNS_1}" ]]; then
# and second upstream servers do not exist
if [[ ! "${PIHOLE_DNS_2}" ]]; then
#
prePopulate=""
# Otherwise,
else
#
prePopulate=", ${PIHOLE_DNS_2}"
fi
#
elif [[ "${PIHOLE_DNS_1}" ]] && [[ ! "${PIHOLE_DNS_2}" ]]; then
#
prePopulate="${PIHOLE_DNS_1}"
#
elif [[ "${PIHOLE_DNS_1}" ]] && [[ "${PIHOLE_DNS_2}" ]]; then
#
prePopulate="${PIHOLE_DNS_1}, ${PIHOLE_DNS_2}"
fi
# Dialog for the user to enter custom upstream servers
piholeDNS=$(whiptail --backtitle "Specify Upstream DNS Provider(s)" --inputbox "Enter your desired upstream DNS provider(s), seperated by a comma.\\n\\nFor example '8.8.8.8, 8.8.4.4'" ${r} ${c} "${prePopulate}" 3>&1 1>&2 2>&3) || \
{ echo -e " ${COL_LIGHT_RED}Cancel was selected, exiting installer${COL_NC}"; exit 1; }
#
PIHOLE_DNS_1=$(echo "${piholeDNS}" | sed 's/[, \t]\+/,/g' | awk -F, '{print$1}')
PIHOLE_DNS_2=$(echo "${piholeDNS}" | sed 's/[, \t]\+/,/g' | awk -F, '{print$2}')
# If the IP is valid,
if ! valid_ip "${PIHOLE_DNS_1}" || [[ ! "${PIHOLE_DNS_1}" ]]; then
# store it in the variable so we can use it
PIHOLE_DNS_1=${strInvalid}
fi
# Do the same for the secondary server
if ! valid_ip "${PIHOLE_DNS_2}" && [[ "${PIHOLE_DNS_2}" ]]; then
PIHOLE_DNS_2=${strInvalid}
fi
# If either of the DNS servers are invalid,
if [[ "${PIHOLE_DNS_1}" == "${strInvalid}" ]] || [[ "${PIHOLE_DNS_2}" == "${strInvalid}" ]]; then
# explain this to the user
whiptail --msgbox --backtitle "Invalid IP" --title "Invalid IP" "One or both entered IP addresses were invalid. Please try again.\\n\\n DNS Server 1: $PIHOLE_DNS_1\\n DNS Server 2: ${PIHOLE_DNS_2}" ${r} ${c}
# and set the variables back to nothing
if [[ "${PIHOLE_DNS_1}" == "${strInvalid}" ]]; then
PIHOLE_DNS_1=""
fi
if [[ "${PIHOLE_DNS_2}" == "${strInvalid}" ]]; then
PIHOLE_DNS_2=""
fi
# Since the settings will not work, stay in the loop
DNSSettingsCorrect=False
# Othwerise,
else
# Show the settings
if (whiptail --backtitle "Specify Upstream DNS Provider(s)" --title "Upstream DNS Provider(s)" --yesno "Are these settings correct?\\n DNS Server 1: $PIHOLE_DNS_1\\n DNS Server 2: ${PIHOLE_DNS_2}" ${r} ${c}); then
# and break from the loop since the servers are vaid
DNSSettingsCorrect=True
# Otherwise,
else
# If the settings are wrong, the loop continues
DNSSettingsCorrect=False
fi
fi
done
;;
esac
}
# Allow the user to enable/disable logging
setLogging() {
# Local, named variables
local LogToggleCommand
local LogChooseOptions
local LogChoices
# Ask if the user wants to log queries
LogToggleCommand=(whiptail --separate-output --radiolist "Do you want to log queries?\\n (Disabling will render graphs on the Admin page useless):" ${r} ${c} 6)
# The default selection is on
LogChooseOptions=("On (Recommended)" "" on
Off "" off)
# Get the user's choice
LogChoices=$("${LogToggleCommand[@]}" "${LogChooseOptions[@]}" 2>&1 >/dev/tty) || (echo -e " ${COL_LIGHT_RED}Cancel was selected, exiting installer${COL_NC}" && exit 1)
case ${LogChoices} in
# If it's on
"On (Recommended)")
echo -e " ${INFO} Logging On."
# Set the GLOBAL variable to true so we know what they selected
QUERY_LOGGING=true
;;
# Othwerise, it's off,
Off)
echo -e " ${INFO} Logging Off."
# So set it to false
QUERY_LOGGING=false
;;
esac
}
# Funtion to ask the user if they want to install the dashboard
setAdminFlag() {
# Local, named variables
local WebToggleCommand
local WebChooseOptions
local WebChoices
# Similar to the logging function, ask what the user wants
WebToggleCommand=(whiptail --separate-output --radiolist "Do you wish to install the web admin interface?" ${r} ${c} 6)
# with the default being enabled
WebChooseOptions=("On (Recommended)" "" on
Off "" off)
WebChoices=$("${WebToggleCommand[@]}" "${WebChooseOptions[@]}" 2>&1 >/dev/tty) || (echo -e " ${COL_LIGHT_RED}Cancel was selected, exiting installer${COL_NC}" && exit 1)
# Depending on their choice
case ${WebChoices} in
"On (Recommended)")
echo -e " ${INFO} Web Interface On"
# Set it to true
INSTALL_WEB=true
;;
Off)
echo -e " ${INFO} Web Interface Off"
# or false
INSTALL_WEB=false
;;
esac
}
# Check if /etc/dnsmasq.conf is from pihole. If so replace with an original and install new in .d directory
version_check_dnsmasq() {
# Local, named variables
local dnsmasq_conf="/etc/dnsmasq.conf"
local dnsmasq_conf_orig="/etc/dnsmasq.conf.orig"
local dnsmasq_pihole_id_string="addn-hosts=/etc/pihole/gravity.list"
local dnsmasq_original_config="${PI_HOLE_LOCAL_REPO}/advanced/dnsmasq.conf.original"
local dnsmasq_pihole_01_snippet="${PI_HOLE_LOCAL_REPO}/advanced/01-pihole.conf"
local dnsmasq_pihole_01_location="/etc/dnsmasq.d/01-pihole.conf"
# If the dnsmasq config file exists
if [[ -f "${dnsmasq_conf}" ]]; then
echo -ne " ${INFO} Existing dnsmasq.conf found..."
# If gravity.list is found within this file, we presume it's from older versions on Pi-hole,
if grep -q ${dnsmasq_pihole_id_string} ${dnsmasq_conf}; then
echo " it is from a previous Pi-hole install."
echo -ne " ${INFO} Backing up dnsmasq.conf to dnsmasq.conf.orig..."
# so backup the original file
mv -f ${dnsmasq_conf} ${dnsmasq_conf_orig}
echo -e "${OVER} ${TICK} Backing up dnsmasq.conf to dnsmasq.conf.orig..."
echo -ne " ${INFO} Restoring default dnsmasq.conf..."
# and replace it with the default
cp ${dnsmasq_original_config} ${dnsmasq_conf}
echo -e "${OVER} ${TICK} Restoring default dnsmasq.conf..."
# Otherwise,
else
# Don't to anything
echo " it is not a Pi-hole file, leaving alone!"
fi
else
# If a file cannot be found,
echo -ne " ${INFO} No dnsmasq.conf found... restoring default dnsmasq.conf..."
# restore the default one
cp ${dnsmasq_original_config} ${dnsmasq_conf}
echo -e "${OVER} ${TICK} No dnsmasq.conf found... restoring default dnsmasq.conf..."
fi
echo -en " ${INFO} Copying 01-pihole.conf to /etc/dnsmasq.d/01-pihole.conf..."
# Copy the new Pi-hole DNS config file into the dnsmasq.d directory
cp ${dnsmasq_pihole_01_snippet} ${dnsmasq_pihole_01_location}
echo -e "${OVER} ${TICK} Copying 01-pihole.conf to /etc/dnsmasq.d/01-pihole.conf"
# Replace our placeholder values with the GLOBAL DNS variables that we populated earlier
# First, swap in the interface to listen on
sed -i "s/@INT@/$PIHOLE_INTERFACE/" ${dnsmasq_pihole_01_location}
if [[ "${PIHOLE_DNS_1}" != "" ]]; then
# Then swap in the primary DNS server
sed -i "s/@DNS1@/$PIHOLE_DNS_1/" ${dnsmasq_pihole_01_location}
else
#
sed -i '/^server=@DNS1@/d' ${dnsmasq_pihole_01_location}
fi
if [[ "${PIHOLE_DNS_2}" != "" ]]; then
# Then swap in the primary DNS server
sed -i "s/@DNS2@/$PIHOLE_DNS_2/" ${dnsmasq_pihole_01_location}
else
#
sed -i '/^server=@DNS2@/d' ${dnsmasq_pihole_01_location}
fi
#
sed -i 's/^#conf-dir=\/etc\/dnsmasq.d$/conf-dir=\/etc\/dnsmasq.d/' ${dnsmasq_conf}
# If the user does not want to enable logging,
if [[ "${QUERY_LOGGING}" == false ]] ; then
# Disable it by commenting out the directive in the DNS config file
sed -i 's/^log-queries/#log-queries/' ${dnsmasq_pihole_01_location}
# Otherwise,
else
# enable it by uncommenting the directive in the DNS config file
sed -i 's/^#log-queries/log-queries/' ${dnsmasq_pihole_01_location}
fi
}
# Clean an existing installation to prepare for upgrade/reinstall
clean_existing() {
# Local, named variables
# ${1} Directory to clean
local clean_directory="${1}"
# Make ${2} the new one?
shift
# ${2} Array of files to remove
local old_files=( "$@" )
# For each script found in the old files array
for script in "${old_files[@]}"; do
# Remove them
rm -f "${clean_directory}/${script}.sh"
done
}
# Install the scripts from repository to their various locations
installScripts() {
# Local, named variables
local str="Installing scripts from ${PI_HOLE_LOCAL_REPO}"
echo -ne " ${INFO} ${str}..."
# Clear out script files from Pi-hole scripts directory.
clean_existing "${PI_HOLE_INSTALL_DIR}" "${PI_HOLE_FILES[@]}"
# Install files from local core repository
if is_repo "${PI_HOLE_LOCAL_REPO}"; then
# move into the directory
cd "${PI_HOLE_LOCAL_REPO}"
# Install the scripts by:
# -o setting the owner to the user
# -Dm755 create all leading components of destiantion except the last, then copy the source to the destiantion and setting the permissions to 755
#
# This first one is the directory
install -o "${USER}" -Dm755 -d "${PI_HOLE_INSTALL_DIR}"
# The rest are the scripts Pi-hole needs
install -o "${USER}" -Dm755 -t "${PI_HOLE_INSTALL_DIR}" gravity.sh
install -o "${USER}" -Dm755 -t "${PI_HOLE_INSTALL_DIR}" ./advanced/Scripts/*.sh
install -o "${USER}" -Dm755 -t "${PI_HOLE_INSTALL_DIR}" ./automated\ install/uninstall.sh
install -o "${USER}" -Dm755 -t "${PI_HOLE_INSTALL_DIR}" ./advanced/Scripts/COL_TABLE
install -o "${USER}" -Dm755 -t /usr/local/bin/ pihole
install -Dm644 ./advanced/bash-completion/pihole /etc/bash_completion.d/pihole
echo -e "${OVER} ${TICK} ${str}"
# Otherwise,
else
# Show an error and exit
echo -e "${OVER} ${CROSS} ${str}
${COL_LIGHT_RED}Error: Local repo ${PI_HOLE_LOCAL_REPO} not found, exiting installer${COL_NC}"
exit 1
fi
}
# Install the configs from PI_HOLE_LOCAL_REPO to their various locations
installConfigs() {
echo ""
echo -e " ${INFO} Installing configs from ${PI_HOLE_LOCAL_REPO}..."
# Make sure Pi-hole's config files are in place
version_check_dnsmasq
# If the user chose to install the dashboard,
if [[ "${INSTALL_WEB}" == true ]]; then
# and if the Web server conf directory does not exist,
if [[ ! -d "/etc/lighttpd" ]]; then
# make it
mkdir /etc/lighttpd
# and set the owners
chown "${USER}":root /etc/lighttpd
# Otherwise, if the config file already exists
elif [[ -f "/etc/lighttpd/lighttpd.conf" ]]; then
# back up the original
mv /etc/lighttpd/lighttpd.conf /etc/lighttpd/lighttpd.conf.orig
fi
# and copy in the config file Pi-hole needs
cp ${PI_HOLE_LOCAL_REPO}/advanced/${LIGHTTPD_CFG} /etc/lighttpd/lighttpd.conf
# if there is a custom block page in the html/pihole directory, replace 404 handler in lighttpd config
if [[ -f "/var/www/html/pihole/custom.php" ]]; then
sed -i 's/^\(server\.error-handler-404\s*=\s*\).*$/\1"pihole\/custom\.php"/' /etc/lighttpd/lighttpd.conf
fi
# Make the directories if they do not exist and set the owners
mkdir -p /var/run/lighttpd
chown ${LIGHTTPD_USER}:${LIGHTTPD_GROUP} /var/run/lighttpd
mkdir -p /var/cache/lighttpd/compress
chown ${LIGHTTPD_USER}:${LIGHTTPD_GROUP} /var/cache/lighttpd/compress
mkdir -p /var/cache/lighttpd/uploads
chown ${LIGHTTPD_USER}:${LIGHTTPD_GROUP} /var/cache/lighttpd/uploads
fi
}
stop_service() {
# Stop service passed in as argument.
# Can softfail, as process may not be installed when this is called
local str="Stopping ${1} service"
echo ""
echo -ne " ${INFO} ${str}..."
if command -v systemctl &> /dev/null; then
systemctl stop "${1}" &> /dev/null || true
else
service "${1}" stop &> /dev/null || true
fi
echo -e "${OVER} ${TICK} ${str}..."
}
# Start/Restart service passed in as argument
start_service() {
# Local, named variables
local str="Starting ${1} service"
echo ""
echo -ne " ${INFO} ${str}..."
# If systemctl exists,
if command -v systemctl &> /dev/null; then
# use that to restart the service
systemctl restart "${1}" &> /dev/null
# Otherwise,
else
# fall back to the service command
service "${1}" restart &> /dev/null
fi
echo -e "${OVER} ${TICK} ${str}"
}
# Enable service so that it will start with next reboot
enable_service() {
# Local, named variables
local str="Enabling ${1} service to start on reboot"
echo ""
echo -ne " ${INFO} ${str}..."
# If systemctl exists,
if command -v systemctl &> /dev/null; then
# use that to enable the service
systemctl enable "${1}" &> /dev/null
# Othwerwise,
else
# use update-rc.d to accomplish this
update-rc.d "${1}" defaults &> /dev/null
fi
echo -e "${OVER} ${TICK} ${str}"
}
update_package_cache() {
# Running apt-get update/upgrade with minimal output can cause some issues with
# requiring user input (e.g password for phpmyadmin see #218)
# Update package cache on apt based OSes. Do this every time since
# it's quick and packages can be updated at any time.
# Local, named variables
local str="Update local cache of available packages"
echo ""
echo -ne " ${INFO} ${str}..."
# Create a command from the package cache variable
if eval "${UPDATE_PKG_CACHE}" &> /dev/null; then
echo -e "${OVER} ${TICK} ${str}"
# Otherwise,
else
# show an error and exit
echo -e "${OVER} ${CROSS} ${str}"
echo -ne " ${COL_LIGHT_RED}Error: Unable to update package cache. Please try \"${UPDATE_PKG_CACHE}\"${COL_NC}"
return 1
fi
}
# Let user know if they have outdated packages on their system and
# advise them to run a package update at soonest possible.
notify_package_updates_available() {
# Local, named variables
local str="Checking ${PKG_MANAGER} for upgraded packages"
echo -ne "\\n ${INFO} ${str}..."
# Store the list of packages in a variable
updatesToInstall=$(eval "${PKG_COUNT}")
if [[ -d "/lib/modules/$(uname -r)" ]]; then
#
if [[ "${updatesToInstall}" -eq 0 ]]; then
#
echo -e "${OVER} ${TICK} ${str}... up to date!"
echo ""
else
#
echo -e "${OVER} ${TICK} ${str}... ${updatesToInstall} updates available"
echo -e " ${INFO} ${COL_LIGHT_GREEN}It is recommended to update your OS after installing the Pi-hole! ${COL_NC}"
echo ""
fi
else
echo -e "${OVER} ${CROSS} ${str}
Kernel update detected. If the install fails, please reboot and try again\\n"
fi
}
# What's this doing outside of a function in the middle of nowhere?
counter=0
install_dependent_packages() {
# Local, named variables should be used here, especially for an iterator
# Add one to the counter
counter=$((counter+1))
# If it equals 1,
if [[ "${counter}" == 1 ]]; then
#
echo -e " ${INFO} Installer Dependency checks..."
else
#
echo -e " ${INFO} Main Dependency checks..."
fi
# Install packages passed in via argument array
# No spinner - conflicts with set -e
declare -a argArray1=("${!1}")
declare -a installArray
# Debian based package install - debconf will download the entire package list
# so we just create an array of packages not currently installed to cut down on the
# amount of download traffic.
# NOTE: We may be able to use this installArray in the future to create a list of package that were
# installed by us, and remove only the installed packages, and not the entire list.
if command -v debconf-apt-progress &> /dev/null; then
# For each package,
for i in "${argArray1[@]}"; do
echo -ne " ${INFO} Checking for $i..."
#
if dpkg-query -W -f='${Status}' "${i}" 2>/dev/null | grep "ok installed" &> /dev/null; then
#
echo -e "${OVER} ${TICK} Checking for $i"
else
#
echo -e "${OVER} ${CROSS} Checking for $i (will be installed)"
#
installArray+=("${i}")
fi
done
#
if [[ "${#installArray[@]}" -gt 0 ]]; then
#
test_dpkg_lock
#
debconf-apt-progress -- "${PKG_INSTALL[@]}" "${installArray[@]}"
return
fi
echo ""
#
return 0
fi
# Install Fedora/CentOS packages
for i in "${argArray1[@]}"; do
echo -ne " ${INFO} Checking for $i..."
#
if ${PKG_MANAGER} -q list installed "${i}" &> /dev/null; then
echo -e "${OVER} ${TICK} Checking for $i"
else
echo -e "${OVER} ${CROSS} Checking for $i (will be installed)"
#
installArray+=("${i}")
fi
done
#
if [[ "${#installArray[@]}" -gt 0 ]]; then
#
"${PKG_INSTALL[@]}" "${installArray[@]}" &> /dev/null
return
fi
echo ""
return 0
}
# Create logfiles if necessary
CreateLogFile() {
local str="Creating log and changing owner to dnsmasq"
echo ""
echo -ne " ${INFO} ${str}..."
# If the pihole log does not exist,
if [[ ! -f "/var/log/pihole.log" ]]; then
# Make it,
touch /var/log/pihole.log
# set the permissions,
chmod 644 /var/log/pihole.log
# and owners
chown "${DNSMASQ_USER}":root /var/log/pihole.log
echo -e "${OVER} ${TICK} ${str}"
# Otherwise,
else
# the file should already exist
echo -e " ${COL_LIGHT_GREEN}log already exists!${COL_NC}"
fi
}
# Install the Web interface dashboard
installPiholeWeb() {
echo ""
echo " ${INFO} Installing blocking page..."
local str="Creating directory for blocking page, and copying files"
echo -ne " ${INFO} ${str}..."
# Install the directory
install -d /var/www/html/pihole
# and the blockpage
install -D ${PI_HOLE_LOCAL_REPO}/advanced/{index,blockingpage}.* /var/www/html/pihole/
# Remove superseded file
if [[ -e "/var/www/html/pihole/index.js" ]]; then
rm "/var/www/html/pihole/index.js"
fi
echo -e "${OVER} ${TICK} ${str}"
local str="Backing up index.lighttpd.html"
echo -ne " ${INFO} ${str}..."
# If the default index file exists,
if [[ -f "/var/www/html/index.lighttpd.html" ]]; then
# back it up
mv /var/www/html/index.lighttpd.html /var/www/html/index.lighttpd.orig
echo -e "${OVER} ${TICK} ${str}"
# Othwerwise,
else
# don't do anything
echo -e "${OVER} ${CROSS} ${str}
No default index.lighttpd.html file found... not backing up"
fi
# Install Sudoers file
echo ""
local str="Installing sudoer file"
echo -ne " ${INFO} ${str}..."
# Make the .d directory if it doesn't exist
mkdir -p /etc/sudoers.d/
# and copy in the pihole sudoers file
cp ${PI_HOLE_LOCAL_REPO}/advanced/pihole.sudo /etc/sudoers.d/pihole
# Add lighttpd user (OS dependent) to sudoers file
echo "${LIGHTTPD_USER} ALL=NOPASSWD: /usr/local/bin/pihole" >> /etc/sudoers.d/pihole
# If the Web server user is lighttpd,
if [[ "$LIGHTTPD_USER" == "lighttpd" ]]; then
# Allow executing pihole via sudo with Fedora
# Usually /usr/local/bin is not permitted as directory for sudoable programms
echo "Defaults secure_path = /sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin" >> /etc/sudoers.d/pihole
fi
# Set the strict permissions on the file
chmod 0440 /etc/sudoers.d/pihole
echo -e "${OVER} ${TICK} ${str}"
}
# Installs a cron file
installCron() {
# Install the cron job
local str="Installing latest Cron script"
echo ""
echo -ne " ${INFO} ${str}..."
# Copy the cron file over from the local repo
cp ${PI_HOLE_LOCAL_REPO}/advanced/pihole.cron /etc/cron.d/pihole
# Randomize gravity update time
sed -i "s/59 1/$((1 + RANDOM % 58)) $((3 + RANDOM % 2))/" /etc/cron.d/pihole
echo -e "${OVER} ${TICK} ${str}"
}
# Gravity is a very important script as it aggregates all of the domains into a single HOSTS formatted list,
# which is what Pi-hole needs to begin blocking ads
runGravity() {
echo ""
echo -e " ${INFO} Preparing to run gravity.sh to refresh hosts..."
# If cached lists exist,
if ls /etc/pihole/list* 1> /dev/null 2>&1; then
echo -e " ${INFO} Cleaning up previous install (preserving whitelist/blacklist)"
# remove them
rm /etc/pihole/list.*
fi
# If the default ad lists file exists,
if [[ ! -e /etc/pihole/adlists.default ]]; then
# copy it over from the local repo
cp ${PI_HOLE_LOCAL_REPO}/adlists.default /etc/pihole/adlists.default
fi
echo -e " ${INFO} Running gravity.sh"
# Run gravity in the current shell
{ /opt/pihole/gravity.sh; }
}
# Check if the pihole user exists and create if it does not
create_pihole_user() {
local str="Checking for user 'pihole'"
echo -ne " ${INFO} ${str}..."
# If the user pihole exists,
if id -u pihole &> /dev/null; then
# just show a success
echo -ne "${OVER} ${TICK} ${str}"
# Othwerwise,
else
echo -ne "${OVER} ${CROSS} ${str}"
local str="Creating user 'pihole'"
echo -ne " ${INFO} ${str}..."
# create her with the useradd command
useradd -r -s /usr/sbin/nologin pihole
echo -ne "${OVER} ${TICK} ${str}"
fi
}
# Allow HTTP and DNS traffic
configureFirewall() {
echo ""
# If a firewall is running,
if firewall-cmd --state &> /dev/null; then
# ask if the user wants to install Pi-hole's default firwall rules
whiptail --title "Firewall in use" --yesno "We have detected a running firewall\\n\\nPi-hole currently requires HTTP and DNS port access.\\n\\n\\n\\nInstall Pi-hole default firewall rules?" ${r} ${c} || \
{ echo -e " ${INFO} Not installing firewall rulesets."; return 0; }
echo -e " ${TICK} Configuring FirewallD for httpd and dnsmasq"
# Allow HTTP and DNS traffice
firewall-cmd --permanent --add-service=http --add-service=dns
# Reload the firewall to apply these changes
firewall-cmd --reload
return 0
# Check for proper kernel modules to prevent failure
elif modinfo ip_tables &> /dev/null && command -v iptables &> /dev/null; then
# If chain Policy is not ACCEPT or last Rule is not ACCEPT
# then check and insert our Rules above the DROP/REJECT Rule.
if iptables -S INPUT | head -n1 | grep -qv '^-P.*ACCEPT$' || iptables -S INPUT | tail -n1 | grep -qv '^-\(A\|P\).*ACCEPT$'; then
whiptail --title "Firewall in use" --yesno "We have detected a running firewall\\n\\nPi-hole currently requires HTTP and DNS port access.\\n\\n\\n\\nInstall Pi-hole default firewall rules?" ${r} ${c} || \
{ echo -e " ${INFO} Not installing firewall rulesets."; return 0; }
echo -e " ${TICK} Installing new IPTables firewall rulesets"
# Check chain first, otherwise a new rule will duplicate old ones
iptables -C INPUT -p tcp -m tcp --dport 80 -j ACCEPT &> /dev/null || iptables -I INPUT 1 -p tcp -m tcp --dport 80 -j ACCEPT
iptables -C INPUT -p tcp -m tcp --dport 53 -j ACCEPT &> /dev/null || iptables -I INPUT 1 -p tcp -m tcp --dport 53 -j ACCEPT
iptables -C INPUT -p udp -m udp --dport 53 -j ACCEPT &> /dev/null || iptables -I INPUT 1 -p udp -m udp --dport 53 -j ACCEPT
iptables -C INPUT -p tcp -m tcp --dport 4711:4720 -i lo -j ACCEPT &> /dev/null || iptables -I INPUT 1 -p tcp -m tcp --dport 4711:4720 -i lo -j ACCEPT
return 0
fi
# Othwerwise,
else
# no firewall is running
echo -e " ${INFO} No active firewall detected.. skipping firewall configuration"
# so just exit
return 0
fi
echo -e " ${INFO} Skipping firewall configuration"
}
#
finalExports() {
# If the Web interface is not set to be installed,
if [[ "${INSTALL_WEB}" == false ]]; then
# and if there is not an IPv4 address,
if [[ "${IPV4_ADDRESS}" ]]; then
# there is no block page, so set IPv4 to 0.0.0.0 (all IP addresses)
IPV4_ADDRESS="0.0.0.0"
fi
if [[ "${IPV6_ADDRESS}" ]]; then
# and IPv6 to ::/0
IPV6_ADDRESS="::/0"
fi
fi
# If the setup variable file exists,
if [[ -e "${setupVars}" ]]; then
# update the variables in the file
sed -i.update.bak '/PIHOLE_INTERFACE/d;/IPV4_ADDRESS/d;/IPV6_ADDRESS/d;/PIHOLE_DNS_1/d;/PIHOLE_DNS_2/d;/QUERY_LOGGING/d;/INSTALL_WEB/d;/LIGHTTPD_ENABLED/d;' "${setupVars}"
fi
# echo the information to the user
{
echo "PIHOLE_INTERFACE=${PIHOLE_INTERFACE}"
echo "IPV4_ADDRESS=${IPV4_ADDRESS}"
echo "IPV6_ADDRESS=${IPV6_ADDRESS}"
echo "PIHOLE_DNS_1=${PIHOLE_DNS_1}"
echo "PIHOLE_DNS_2=${PIHOLE_DNS_2}"
echo "QUERY_LOGGING=${QUERY_LOGGING}"
echo "INSTALL_WEB=${INSTALL_WEB}"
echo "LIGHTTPD_ENABLED=${LIGHTTPD_ENABLED}"
}>> "${setupVars}"
# Bring in the current settings and the functions to manipulate them
source "${setupVars}"
source "${PI_HOLE_LOCAL_REPO}/advanced/Scripts/webpage.sh"
# Look for DNS server settings which would have to be reapplied
ProcessDNSSettings
# Look for DHCP server settings which would have to be reapplied
ProcessDHCPSettings
}
# Install the logrotate script
installLogrotate() {
local str="Installing latest logrotate script"
echo ""
echo -ne " ${INFO} ${str}..."
# Copy the file over from the local repo
cp ${PI_HOLE_LOCAL_REPO}/advanced/logrotate /etc/pihole/logrotate
# Different operating systems have different user / group
# settings for logrotate that makes it impossible to create
# a static logrotate file that will work with e.g.
# Rasbian and Ubuntu at the same time. Hence, we have to
# customize the logrotate script here in order to reflect
# the local properties of the /var/log directory
logusergroup="$(stat -c '%U %G' /var/log)"
# If the variable has a value,
if [[ ! -z "${logusergroup}" ]]; then
#
sed -i "s/# su #/su ${logusergroup}/g;" /etc/pihole/logrotate
fi
echo -e "${OVER} ${TICK} ${str}"
}
# Install base files and web interface
installPihole() {
# Create the pihole user
create_pihole_user
# If the user wants to install the Web interface,
if [[ "${INSTALL_WEB}" == true ]]; then
if [[ ! -d "/var/www/html" ]]; then
# make the Web directory if necessary
mkdir -p /var/www/html
fi
# Set the owner and permissions
chown ${LIGHTTPD_USER}:${LIGHTTPD_GROUP} /var/www/html
chmod 775 /var/www/html
# Give pihole access to the Web server group
usermod -a -G ${LIGHTTPD_GROUP} pihole
# If the lighttpd command is executable,
if [[ -x "$(command -v lighty-enable-mod)" ]]; then
# enable fastcgi and fastcgi-php
lighty-enable-mod fastcgi fastcgi-php > /dev/null || true
else
# Othweise, show info about installing them
echo -e " ${INFO} Warning: 'lighty-enable-mod' utility not found
Please ensure fastcgi is enabled if you experience issues\\n"
fi
fi
# Install scripts,
installScripts
# configs,
installConfigs
# and create the log file
CreateLogFile
# If the user wants to install the dashboard,
if [[ "${INSTALL_WEB}" == true ]]; then
# do so
installPiholeWeb
fi
# Install the cron file
installCron
# Install the logrotate file
installLogrotate
# Check if FTL is installed
FTLdetect || echo -e " ${CROSS} FTL Engine not installed"
# Configure the firewall
configureFirewall
#update setupvars.conf with any variables that may or may not have been changed during the install
finalExports
}
# At some point in the future this list can be pruned, for now we'll need it to ensure updates don't break.
# Refactoring of install script has changed the name of a couple of variables. Sort them out here.
accountForRefactor() {
sed -i 's/piholeInterface/PIHOLE_INTERFACE/g' ${setupVars}
sed -i 's/IPv4_address/IPV4_ADDRESS/g' ${setupVars}
sed -i 's/IPv4addr/IPV4_ADDRESS/g' ${setupVars}
sed -i 's/IPv6_address/IPV6_ADDRESS/g' ${setupVars}
sed -i 's/piholeIPv6/IPV6_ADDRESS/g' ${setupVars}
sed -i 's/piholeDNS1/PIHOLE_DNS_1/g' ${setupVars}
sed -i 's/piholeDNS2/PIHOLE_DNS_2/g' ${setupVars}
}
updatePihole() {
accountForRefactor
# Install base files and web interface
installScripts
# Install config files
installConfigs
# Create the log file
CreateLogFile
# If the user wants to install the dasboard,
if [[ "${INSTALL_WEB}" == true ]]; then
# do so
installPiholeWeb
fi
# Install the cron file
installCron
# Install logrotate
installLogrotate
# Detect if FTL is installed
FTLdetect || echo -e " ${CROSS} FTL Engine not installed."
#update setupvars.conf with any variables that may or may not have been changed during the install
finalExports
}
# SELinux
checkSelinux() {
# If the getenforce command exists,
if command -v getenforce &> /dev/null; then
# Store the current mode in a variable
enforceMode=$(getenforce)
echo -e "\\n ${INFO} SELinux mode detected: ${enforceMode}"
# If it's enforcing,
if [[ "${enforceMode}" == "Enforcing" ]]; then
# Explain Pi-hole does not support it yet
whiptail --defaultno --title "SELinux Enforcing Detected" --yesno "SELinux is being ENFORCED on your system! \\n\\nPi-hole currently does not support SELinux, but you may still continue with the installation.\\n\\nNote: Web Admin will not be fully functional unless you set your policies correctly\\n\\nContinue installing Pi-hole?" ${r} ${c} || \
{ echo -e "\\n ${COL_LIGHT_RED}SELinux Enforcing detected, exiting installer${COL_NC}"; exit 1; }
echo -e " ${INFO} Continuing installation with SELinux Enforcing
${INFO} Please refer to official SELinux documentation to create a custom policy"
fi
fi
}
# Installation complete message with instructions for the user
displayFinalMessage() {
# If
if [[ "${#1}" -gt 0 ]] ; then
pwstring="$1"
# else, if the dashboard password in the setup variables exists,
elif [[ $(grep 'WEBPASSWORD' -c /etc/pihole/setupVars.conf) -gt 0 ]]; then
# set a variable for evaluation later
pwstring="unchanged"
else
# set a variable for evaluation later
pwstring="NOT SET"
fi
# If the user wants to install the dashboard,
if [[ "${INSTALL_WEB}" == true ]]; then
# Store a message in a variable and display it
additional="View the web interface at http://pi.hole/admin or http://${IPV4_ADDRESS%/*}/admin
Your Admin Webpage login password is ${pwstring}"
fi
# Final completion message to user
whiptail --msgbox --backtitle "Make it so." --title "Installation Complete!" "Configure your devices to use the Pi-hole as their DNS server using:
IPv4: ${IPV4_ADDRESS%/*}
IPv6: ${IPV6_ADDRESS:-"Not Configured"}
If you set a new IP address, you should restart the Pi.
The install log is in /etc/pihole.
${additional}" ${r} ${c}
}
update_dialogs() {
# If pihole -r "reconfigure" option was selected,
if [[ "${reconfigure}" = true ]]; then
# set some variables that will be used
opt1a="Repair"
opt1b="This will retain existing settings"
strAdd="You will remain on the same version"
# Othweise,
else
# set some variables with different values
opt1a="Update"
opt1b="This will retain existing settings."
strAdd="You will be updated to the latest version."
fi
opt2a="Reconfigure"
opt2b="This will allow you to enter new settings"
# Display the information to the user
UpdateCmd=$(whiptail --title "Existing Install Detected!" --menu "\\n\\nWe have detected an existing install.\\n\\nPlease choose from the following options: \\n($strAdd)" ${r} ${c} 2 \
"${opt1a}" "${opt1b}" \
"${opt2a}" "${opt2b}" 3>&2 2>&1 1>&3) || \
{ echo -e " ${COL_LIGHT_RED}Cancel was selected, exiting installer${COL_NC}"; exit 1; }
# Set the variable based on if the user chooses
case ${UpdateCmd} in
# repair, or
${opt1a})
echo -e " ${INFO} ${opt1a} option selected"
useUpdateVars=true
;;
# reconfigure,
${opt2a})
echo -e " ${INFO} ${opt2a} option selected"
useUpdateVars=false
;;
esac
}
clone_or_update_repos() {
# If the user wants to reconfigure,
if [[ "${reconfigure}" == true ]]; then
echo " ${INFO} Performing reconfiguration, skipping download of local repos"
# Reset the Core repo
resetRepo ${PI_HOLE_LOCAL_REPO} || \
{ echo -e " ${COL_LIGHT_RED}Unable to reset ${PI_HOLE_LOCAL_REPO}, exiting installer${COL_NC}"; \
exit 1; \
}
# If the Web interface was installed,
if [[ "${INSTALL_WEB}" == true ]]; then
# reset it's repo
resetRepo ${webInterfaceDir} || \
{ echo -e " ${COL_LIGHT_RED}Unable to reset ${webInterfaceDir}, exiting installer${COL_NC}"; \
exit 1; \
}
fi
# Otherwise, a repair is happening
else
# so get git files for Core
getGitFiles ${PI_HOLE_LOCAL_REPO} ${piholeGitUrl} || \
{ echo -e " ${COL_LIGHT_RED}Unable to clone ${piholeGitUrl} into ${PI_HOLE_LOCAL_REPO}, unable to continue${COL_NC}"; \
exit 1; \
}
# If the Web interface was installed,
if [[ "${INSTALL_WEB}" == true ]]; then
# get the Web git files
getGitFiles ${webInterfaceDir} ${webInterfaceGitUrl} || \
{ echo -e " ${COL_LIGHT_RED}Unable to clone ${webInterfaceGitUrl} into ${webInterfaceDir}, exiting installer${COL_NC}"; \
exit 1; \
}
fi
fi
}
# Download and install FTL binary
FTLinstall() {
# Local, named variables
local binary="${1}"
local latesttag
local orig_dir
local str="Downloading and Installing FTL"
echo -ne " ${INFO} ${str}..."
# Get the current working directory
orig_dir="${PWD}"
# Find the latest version tag for FTL
latesttag=$(curl -sI https://github.com/pi-hole/FTL/releases/latest | grep "Location" | awk -F '/' '{print $NF}')
# Tags should always start with v, check for that.
if [[ ! "${latesttag}" == v* ]]; then
echo -e "${OVER} ${CROSS} ${str}"
echo -e " ${COL_LIGHT_RED}Error: Unable to get latest release location from GitHub${COL_NC}"
return 1
fi
# If the download worked,
if curl -sSL --fail "https://github.com/pi-hole/FTL/releases/download/${latesttag%$'\r'}/${binary}" -o "/tmp/${binary}"; then
# get sha1 of the binary we just downloaded for verification.
curl -sSL --fail "https://github.com/pi-hole/FTL/releases/download/${latesttag%$'\r'}/${binary}.sha1" -o "/tmp/${binary}.sha1"
# Move into the temp directory
cd /tmp
# If we downloaded binary file (as opposed to text),
if sha1sum --status --quiet -c "${binary}".sha1; then
echo -n "transferred... "
# Stop FTL
stop_service pihole-FTL &> /dev/null
# Install the new version with the correct permissions
install -T -m 0755 /tmp/${binary} /usr/bin/pihole-FTL
# Remove the tempoary file
rm /tmp/${binary} /tmp/${binary}.sha1
# Move back into the original directory the user was in
cd "${orig_dir}"
# Install the FTL service
install -T -m 0755 "${PI_HOLE_LOCAL_REPO}/advanced/pihole-FTL.service" "/etc/init.d/pihole-FTL"
echo -e "${OVER} ${TICK} ${str}"
return 0
# Otherise,
else
echo -e "${OVER} ${CROSS} ${str}"
echo -e " ${COL_LIGHT_RED}Error: Download of binary from Github failed${COL_NC}"
# the download failed, so just go back to the original directory
cd "${orig_dir}"
return 1
fi
# Otherwise,
else
cd "${orig_dir}"
echo -e "${OVER} ${CROSS} ${str}"
# The URL could not be found
echo -e " ${COL_LIGHT_RED}Error: URL not found${COL_NC}"
fi
}
# Detect suitable FTL binary platform
FTLdetect() {
echo ""
echo -e " ${INFO} FTL Checks..."
# Local, named variables
local machine
local binary
# Store architecture in a variable
machine=$(uname -m)
local str="Detecting architecture"
echo -ne " ${INFO} ${str}..."
# If the machine is arm or aarch
if [[ "${machine}" == "arm"* || "${machine}" == *"aarch"* ]]; then
# ARM
#
local rev
rev=$(uname -m | sed "s/[^0-9]//g;")
#
local lib
lib=$(ldd /bin/ls | grep -E '^\s*/lib' | awk '{ print $1 }')
#
if [[ "${lib}" == "/lib/ld-linux-aarch64.so.1" ]]; then
echo -e "${OVER} ${TICK} Detected ARM-aarch64 architecture"
# set the binary to be used
binary="pihole-FTL-aarch64-linux-gnu"
#
elif [[ "${lib}" == "/lib/ld-linux-armhf.so.3" ]]; then
#
if [[ "${rev}" -gt 6 ]]; then
echo -e "${OVER} ${TICK} Detected ARM-hf architecture (armv7+)"
# set the binary to be used
binary="pihole-FTL-arm-linux-gnueabihf"
# Otherwise,
else
echo -e "${OVER} ${TICK} Detected ARM-hf architecture (armv6 or lower) Using ARM binary"
# set the binary to be used
binary="pihole-FTL-arm-linux-gnueabi"
fi
else
echo -e "${OVER} ${TICK} Detected ARM architecture"
# set the binary to be used
binary="pihole-FTL-arm-linux-gnueabi"
fi
elif [[ "${machine}" == "ppc" ]]; then
# PowerPC
echo -e "${OVER} ${TICK} Detected PowerPC architecture"
# set the binary to be used
binary="pihole-FTL-powerpc-linux-gnu"
elif [[ "${machine}" == "x86_64" ]]; then
# 64bit
echo -e "${OVER} ${TICK} Detected x86_64 architecture"
# set the binary to be used
binary="pihole-FTL-linux-x86_64"
else
# Something else - we try to use 32bit executable and warn the user
if [[ ! "${machine}" == "i686" ]]; then
echo -e "${OVER} ${CROSS} ${str}...
${COL_LIGHT_RED}Not able to detect architecture (unknown: ${machine}), trying 32bit executable${COL_NC}
Contact Pi-hole Support if you experience issues (e.g: FTL not running)"
else
echo -e "${OVER} ${TICK} Detected 32bit (i686) architecture"
fi
binary="pihole-FTL-linux-x86_32"
fi
#In the next section we check to see if FTL is already installed (in case of pihole -r).
#If the installed version matches the latest version, then check the installed sha1sum of the binary vs the remote sha1sum. If they do not match, then download
echo -e " ${INFO} Checking for existing FTL binary..."
local ftlLoc=$(which pihole-FTL)
if [[ ${ftlLoc} ]]; then
local FTLversion=$(/usr/bin/pihole-FTL tag)
local FTLlatesttag=$(curl -sI https://github.com/pi-hole/FTL/releases/latest | grep 'Location' | awk -F '/' '{print $NF}' | tr -d '\r\n')
if [[ "${FTLversion}" != "${FTLlatesttag}" ]]; then
# Install FTL
FTLinstall "${binary}" || return 1
else
echo -e " ${INFO} Latest FTL Binary already installed (${FTLlatesttag}). Confirming Checksum..."
local remoteSha1=$(curl -sSL --fail "https://github.com/pi-hole/FTL/releases/download/${FTLversion%$'\r'}/${binary}.sha1" | cut -d ' ' -f 1)
local localSha1=$(sha1sum "$(which pihole-FTL)" | cut -d ' ' -f 1)
if [[ "${remoteSha1}" != "${localSha1}" ]]; then
echo -e " ${INFO} Corruption detected..."
FTLinstall "${binary}" || return 1
else
echo -e " ${INFO} Checksum correct. No need to download!"
fi
fi
else
# Install FTL
FTLinstall "${binary}" || return 1
fi
}
main() {
######## FIRST CHECK ########
# Show the Pi-hole logo so people know it's genuine since the logo and name are trademarked
show_ascii_berry
# Must be root to install
local str="Root user check"
echo ""
# If the user's id is zero,
if [[ "${EUID}" -eq 0 ]]; then
# they are root and all is good
echo -e " ${TICK} ${str}"
# Otherwise,
else
# They do not have enough privileges, so let the user know
echo -e " ${CROSS} ${str}
${COL_LIGHT_RED}Script called with non-root privileges${COL_NC}
The Pi-hole requires elevated privleges to install and run
Please check the installer for any concerns regarding this requirement
Make sure to download this script from a trusted source\\n"
echo -ne " ${INFO} Sudo utility check"
# If the sudo command exists,
if command -v sudo &> /dev/null; then
echo -e "${OVER} ${TICK} Sudo utility check"
# Download the install script and run it with admin rights
exec curl -sSL https://raw.githubusercontent.com/pi-hole/pi-hole/master/automated%20install/basic-install.sh | sudo bash "$@"
exit $?
# Otherwise,
else
# Let them know they need to run it as root
echo -e "${OVER} ${CROSS} Sudo utility check
Sudo is needed for the Web Interface to run pihole commands\\n
${COL_LIGHT_RED}Please re-run this installer as root${COL_NC}"
exit 1
fi
fi
# Check for supported distribution
distro_check
# Check arguments for the undocumented flags
for var in "$@"; do
case "$var" in
"--reconfigure" ) reconfigure=true;;
"--i_do_not_follow_recommendations" ) skipSpaceCheck=false;;
"--unattended" ) runUnattended=true;;
esac
done
# If the setup variable file exists,
if [[ -f "${setupVars}" ]]; then
# if it's running unattended,
if [[ "${runUnattended}" == true ]]; then
echo -e " ${INFO} Performing unattended setup, no whiptail dialogs will be displayed"
# Use the setup variables
useUpdateVars=true
# Otherwise,
else
# show the available options (repair/reconfigure)
update_dialogs
fi
fi
# Start the installer
# Verify there is enough disk space for the install
if [[ "${skipSpaceCheck}" == true ]]; then
echo -e " ${INFO} Skipping free disk space verification"
else
verifyFreeDiskSpace
fi
# Update package cache
update_package_cache || exit 1
# Notify user of package availability
notify_package_updates_available
# Install packages used by this installation script
install_dependent_packages INSTALLER_DEPS[@]
# Check if SELinux is Enforcing
checkSelinux
if [[ "${useUpdateVars}" == false ]]; then
# Display welcome dialogs
welcomeDialogs
# Create directory for Pi-hole storage
mkdir -p /etc/pihole/
stop_service dnsmasq
if [[ "${INSTALL_WEB}" == true ]]; then
stop_service lighttpd
fi
# Determine available interfaces
get_available_interfaces
# Find interfaces and let the user choose one
chooseInterface
# Decide what upstream DNS Servers to use
setDNS
# Let the user decide if they want to block ads over IPv4 and/or IPv6
use4andor6
# Let the user decide if they want the web interface to be installed automatically
setAdminFlag
# Let the user decide if they want query logging enabled...
setLogging
# Clone/Update the repos
clone_or_update_repos
# Install packages used by the Pi-hole
if [[ "${INSTALL_WEB}" == true ]]; then
# Install the Web dependencies
DEPS=("${PIHOLE_DEPS[@]}" "${PIHOLE_WEB_DEPS[@]}")
# Otherwise,
else
# just install the Core dependencies
DEPS=("${PIHOLE_DEPS[@]}")
fi
install_dependent_packages DEPS[@]
if [[ -x "$(command -v systemctl)" ]]; then
# Value will either be 1, if true, or 0
LIGHTTPD_ENABLED=$(systemctl is-enabled lighttpd | grep -c 'enabled' || true)
else
# Value will either be 1, if true, or 0
LIGHTTPD_ENABLED=$(service lighttpd status | awk '/Loaded:/ {print $0}' | grep -c 'enabled' || true)
fi
# Install and log everything to a file
installPihole | tee ${tmpLog}
else
# Clone/Update the repos
clone_or_update_repos
# Source ${setupVars} for use in the rest of the functions
source ${setupVars}
# Install packages used by the Pi-hole
if [[ "${INSTALL_WEB}" == true ]]; then
# Install the Web dependencies
DEPS=("${PIHOLE_DEPS[@]}" "${PIHOLE_WEB_DEPS[@]}")
# Otherwise,
else
# just install the Core dependencies
DEPS=("${PIHOLE_DEPS[@]}")
fi
install_dependent_packages DEPS[@]
if [[ -x "$(command -v systemctl)" ]]; then
# Value will either be 1, if true, or 0
LIGHTTPD_ENABLED=$(systemctl is-enabled lighttpd | grep -c 'enabled' || true)
else
# Value will either be 1, if true, or 0
LIGHTTPD_ENABLED=$(service lighttpd status | awk '/Loaded:/ {print $0}' | grep -c 'enabled' || true)
fi
updatePihole | tee ${tmpLog}
fi
# Move the log file into /etc/pihole for storage
mv ${tmpLog} ${instalLogLoc}
if [[ "${INSTALL_WEB}" == true ]]; then
# Add password to web UI if there is none
pw=""
# If no password is set,
if [[ $(grep 'WEBPASSWORD' -c /etc/pihole/setupVars.conf) == 0 ]] ; then
# generate a random password
pw=$(tr -dc _A-Z-a-z-0-9 < /dev/urandom | head -c 8)
# shellcheck disable=SC1091
. /opt/pihole/webpage.sh
echo "WEBPASSWORD=$(HashPassword ${pw})" >> ${setupVars}
fi
fi
echo -e " ${INFO} Restarting services..."
# Start services
start_service dnsmasq
enable_service dnsmasq
# If the Web server was installed,
if [[ "${INSTALL_WEB}" == true ]]; then
if [[ "${LIGHTTPD_ENABLED}" == "1" ]]; then
start_service lighttpd
enable_service lighttpd
else
echo -e " ${INFO} Lighttpd is disabled, skipping service restart"
fi
fi
# Enable FTL
start_service pihole-FTL
enable_service pihole-FTL
# Download and compile the aggregated block list
runGravity
#
if [[ "${useUpdateVars}" == false ]]; then
displayFinalMessage "${pw}"
fi
# If the Web interface was installed,
if [[ "${INSTALL_WEB}" == true ]]; then
# If there is a password,
if (( ${#pw} > 0 )) ; then
# display the password
echo -e " ${INFO} Web Interface password: ${COL_LIGHT_GREEN}${pw}${COL_NC}
This can be changed using 'pihole -a -p'\\n"
fi
fi
#
if [[ "${useUpdateVars}" == false ]]; then
# If the Web interface was installed,
if [[ "${INSTALL_WEB}" == true ]]; then
echo -e " View the web interface at http://pi.hole/admin or http://${IPV4_ADDRESS%/*}/admin"
echo ""
fi
# Explain to the user how to use Pi-hole as their DNS server
echo " You may now configure your devices to use the Pi-hole as their DNS server"
[[ -n "${IPV4_ADDRESS%/*}" ]] && echo -e " ${INFO} Pi-hole DNS (IPv4): ${IPV4_ADDRESS%/*}"
[[ -n "${IPV6_ADDRESS}" ]] && echo -e " ${INFO} Pi-hole DNS (IPv6): ${IPV6_ADDRESS}"
echo -e " If you set a new IP address, please restart the server running the Pi-hole"
#
INSTALL_TYPE="Installation"
else
#
INSTALL_TYPE="Update"
fi
# Display where the log file is
echo -e "\\n ${INFO} The install log is located at: /etc/pihole/install.log
${COL_LIGHT_GREEN}${INSTALL_TYPE} Complete! ${COL_NC}"
}
#
if [[ "${PH_TEST}" != true ]] ; then
main "$@"
fi
Reference in New Issue View Git Blame Copy Permalink