1
0
mirror of https://github.com/pi-hole/pi-hole synced 2024-12-23 07:18:07 +00:00
pi-hole/advanced/Scripts/piholeDebug.sh
Mcat12 b154dd5f07
Quote calls to read FTL config
Signed-off-by: Mcat12 <newtoncat12@yahoo.com>
2019-07-08 19:48:50 -07:00

1305 lines
54 KiB
Bash
Executable File

#!/usr/bin/env bash
# Pi-hole: A black hole for Internet advertisements
# (c) 2017 Pi-hole, LLC (https://pi-hole.net)
# Network-wide ad blocking via your own hardware.
#
# Generates pihole_debug.log to be used for troubleshooting.
#
# This file is copyright under the latest version of the EUPL.
# Please see LICENSE file for your rights under this license.
# shellcheck source=/dev/null
# -e option instructs bash to immediately exit if any command [1] has a non-zero exit status
# -u a reference to any variable you haven't previously defined
# with the exceptions of $* and $@ - is an error, and causes the program to immediately exit
# -o pipefail prevents errors in a pipeline from being masked. If any command in a pipeline fails,
# that return code will be used as the return code of the whole pipeline. By default, the
# pipeline's return code is that of the last command - even if it succeeds
set -o pipefail
#IFS=$'\n\t'
######## GLOBAL VARS ########
# These variables would normally be next to the other files
# but we need them to be first in order to get the colors needed for the script output
PIHOLE_SCRIPTS_DIRECTORY="/opt/pihole"
PIHOLE_COLTABLE_FILE="${PIHOLE_SCRIPTS_DIRECTORY}/COL_TABLE"
# These provide the colors we need for making the log more readable
if [[ -f ${PIHOLE_COLTABLE_FILE} ]]; then
source ${PIHOLE_COLTABLE_FILE}
else
COL_NC='\e[0m' # No Color
COL_RED='\e[1;91m'
COL_GREEN='\e[1;32m'
COL_YELLOW='\e[1;33m'
COL_PURPLE='\e[1;35m'
COL_CYAN='\e[0;36m'
TICK="[${COL_GREEN}${COL_NC}]"
CROSS="[${COL_RED}${COL_NC}]"
INFO="[i]"
#OVER="\r\033[K"
fi
OBFUSCATED_PLACEHOLDER="<DOMAIN OBFUSCATED>"
# FAQ URLs for use in showing the debug log
FAQ_UPDATE_PI_HOLE="${COL_CYAN}https://discourse.pi-hole.net/t/how-do-i-update-pi-hole/249${COL_NC}"
FAQ_CHECKOUT_COMMAND="${COL_CYAN}https://discourse.pi-hole.net/t/the-pihole-command-with-examples/738#checkout${COL_NC}"
FAQ_HARDWARE_REQUIREMENTS="${COL_CYAN}https://discourse.pi-hole.net/t/hardware-software-requirements/273${COL_NC}"
FAQ_HARDWARE_REQUIREMENTS_PORTS="${COL_CYAN}https://discourse.pi-hole.net/t/hardware-software-requirements/273#ports${COL_NC}"
FAQ_GATEWAY="${COL_CYAN}https://discourse.pi-hole.net/t/why-is-a-default-gateway-important-for-pi-hole/3546${COL_NC}"
FAQ_ULA="${COL_CYAN}https://discourse.pi-hole.net/t/use-ipv6-ula-addresses-for-pi-hole/2127${COL_NC}"
FAQ_FTL_COMPATIBILITY="${COL_CYAN}https://github.com/pi-hole/FTL#compatibility-list${COL_NC}"
FAQ_BAD_ADDRESS="${COL_CYAN}https://discourse.pi-hole.net/t/why-do-i-see-bad-address-at-in-pihole-log/3972${COL_NC}"
# Other URLs we may use
FORUMS_URL="${COL_CYAN}https://discourse.pi-hole.net${COL_NC}"
TRICORDER_CONTEST="${COL_CYAN}https://pi-hole.net/2016/11/07/crack-our-medical-tricorder-win-a-raspberry-pi-3/${COL_NC}"
# Port numbers used for uploading the debug log
TRICORDER_NC_PORT_NUMBER=9999
TRICORDER_SSL_PORT_NUMBER=9998
# Directories required by Pi-hole
# https://discourse.pi-hole.net/t/what-files-does-pi-hole-use/1684
CORE_GIT_DIRECTORY="/etc/.pihole"
CRON_D_DIRECTORY="/etc/cron.d"
DNSMASQ_D_DIRECTORY="/etc/dnsmasq.d"
PIHOLE_DIRECTORY="/etc/pihole"
PIHOLE_SCRIPTS_DIRECTORY="/opt/pihole"
BIN_DIRECTORY="/usr/local/bin"
RUN_DIRECTORY="/run"
LOG_DIRECTORY="/var/log"
WEB_SERVER_LOG_DIRECTORY="${LOG_DIRECTORY}/lighttpd"
WEB_SERVER_CONFIG_DIRECTORY="/etc/lighttpd"
HTML_DIRECTORY="/var/www/html"
WEB_GIT_DIRECTORY="${HTML_DIRECTORY}/admin"
#BLOCK_PAGE_DIRECTORY="${HTML_DIRECTORY}/pihole"
SHM_DIRECTORY="/dev/shm"
# Files required by Pi-hole
# https://discourse.pi-hole.net/t/what-files-does-pi-hole-use/1684
PIHOLE_CRON_FILE="${CRON_D_DIRECTORY}/pihole"
PIHOLE_DNS_CONFIG_FILE="${DNSMASQ_D_DIRECTORY}/01-pihole.conf"
PIHOLE_DHCP_CONFIG_FILE="${DNSMASQ_D_DIRECTORY}/02-pihole-dhcp.conf"
PIHOLE_WILDCARD_CONFIG_FILE="${DNSMASQ_D_DIRECTORY}/03-wildcard.conf"
WEB_SERVER_CONFIG_FILE="${WEB_SERVER_CONFIG_DIRECTORY}/lighttpd.conf"
#WEB_SERVER_CUSTOM_CONFIG_FILE="${WEB_SERVER_CONFIG_DIRECTORY}/external.conf"
PIHOLE_INSTALL_LOG_FILE="${PIHOLE_DIRECTORY}/install.log"
PIHOLE_RAW_BLOCKLIST_FILES="${PIHOLE_DIRECTORY}/list.*"
PIHOLE_LOCAL_HOSTS_FILE="${PIHOLE_DIRECTORY}/local.list"
PIHOLE_LOGROTATE_FILE="${PIHOLE_DIRECTORY}/logrotate"
PIHOLE_SETUP_VARS_FILE="${PIHOLE_DIRECTORY}/setupVars.conf"
PIHOLE_FTL_CONF_FILE="${PIHOLE_DIRECTORY}/pihole-FTL.conf"
# Read the value of an FTL config key. The value is printed to stdout.
#
# Args:
# 1. The key to read
# 2. The default if the setting or config does not exist
get_ftl_conf_value() {
local key=$1
local default=$2
local value
# Obtain key=... setting from pihole-FTL.conf
if [[ -e "$PIHOLE_FTL_CONF_FILE" ]]; then
# Constructed to return nothing when
# a) the setting is not present in the config file, or
# b) the setting is commented out (e.g. "#DBFILE=...")
value="$(sed -n -e "s/^\\s*$key=\\s*//p" ${PIHOLE_FTL_CONF_FILE})"
fi
# Test for missing value. Use default value in this case.
if [[ -z "$value" ]]; then
value="$default"
fi
echo "$value"
}
PIHOLE_GRAVITY_DB_FILE="$(get_ftl_conf_value "GRAVITYDB" "${PIHOLE_DIRECTORY}/gravity.db")"
PIHOLE_COMMAND="${BIN_DIRECTORY}/pihole"
PIHOLE_COLTABLE_FILE="${BIN_DIRECTORY}/COL_TABLE"
FTL_PID="${RUN_DIRECTORY}/pihole-FTL.pid"
FTL_PORT="${RUN_DIRECTORY}/pihole-FTL.port"
PIHOLE_LOG="${LOG_DIRECTORY}/pihole.log"
PIHOLE_LOG_GZIPS="${LOG_DIRECTORY}/pihole.log.[0-9].*"
PIHOLE_DEBUG_LOG="${LOG_DIRECTORY}/pihole_debug.log"
PIHOLE_FTL_LOG="$(get_ftl_conf_value "LOGFILE" "${LOG_DIRECTORY}/pihole-FTL.log")"
PIHOLE_WEB_SERVER_ACCESS_LOG_FILE="${WEB_SERVER_LOG_DIRECTORY}/access.log"
PIHOLE_WEB_SERVER_ERROR_LOG_FILE="${WEB_SERVER_LOG_DIRECTORY}/error.log"
# An array of operating system "pretty names" that we officialy support
# We can loop through the array at any time to see if it matches a value
#SUPPORTED_OS=("Raspbian" "Ubuntu" "Fedora" "Debian" "CentOS")
# Store Pi-hole's processes in an array for easy use and parsing
PIHOLE_PROCESSES=( "lighttpd" "pihole-FTL" )
# Store the required directories in an array so it can be parsed through
#REQUIRED_DIRECTORIES=("${CORE_GIT_DIRECTORY}"
#"${CRON_D_DIRECTORY}"
#"${DNSMASQ_D_DIRECTORY}"
#"${PIHOLE_DIRECTORY}"
#"${PIHOLE_SCRIPTS_DIRECTORY}"
#"${BIN_DIRECTORY}"
#"${RUN_DIRECTORY}"
#"${LOG_DIRECTORY}"
#"${WEB_SERVER_LOG_DIRECTORY}"
#"${WEB_SERVER_CONFIG_DIRECTORY}"
#"${HTML_DIRECTORY}"
#"${WEB_GIT_DIRECTORY}"
#"${BLOCK_PAGE_DIRECTORY}")
# Store the required directories in an array so it can be parsed through
REQUIRED_FILES=("${PIHOLE_CRON_FILE}"
"${PIHOLE_DNS_CONFIG_FILE}"
"${PIHOLE_DHCP_CONFIG_FILE}"
"${PIHOLE_WILDCARD_CONFIG_FILE}"
"${WEB_SERVER_CONFIG_FILE}"
"${PIHOLE_INSTALL_LOG_FILE}"
"${PIHOLE_RAW_BLOCKLIST_FILES}"
"${PIHOLE_LOCAL_HOSTS_FILE}"
"${PIHOLE_LOGROTATE_FILE}"
"${PIHOLE_SETUP_VARS_FILE}"
"${PIHOLE_COMMAND}"
"${PIHOLE_COLTABLE_FILE}"
"${FTL_PID}"
"${FTL_PORT}"
"${PIHOLE_LOG}"
"${PIHOLE_LOG_GZIPS}"
"${PIHOLE_DEBUG_LOG}"
"${PIHOLE_FTL_LOG}"
"${PIHOLE_WEB_SERVER_ACCESS_LOG_FILE}"
"${PIHOLE_WEB_SERVER_ERROR_LOG_FILE}")
DISCLAIMER="This process collects information from your Pi-hole, and optionally uploads it to a unique and random directory on tricorder.pi-hole.net.
The intent of this script is to allow users to self-diagnose their installations. This is accomplished by running tests against our software and providing the user with links to FAQ articles when a problem is detected. Since we are a small team and Pi-hole has been growing steadily, it is our hope that this will help us spend more time on development.
NOTE: All log files auto-delete after 48 hours and ONLY the Pi-hole developers can access your data via the given token. We have taken these extra steps to secure your data and will work to further reduce any personal information gathered.
"
show_disclaimer(){
log_write "${DISCLAIMER}"
}
source_setup_variables() {
# Display the current test that is running
log_write "\\n${COL_PURPLE}*** [ INITIALIZING ]${COL_NC} Sourcing setup variables"
# If the variable file exists,
if ls "${PIHOLE_SETUP_VARS_FILE}" 1> /dev/null 2>&1; then
log_write "${INFO} Sourcing ${PIHOLE_SETUP_VARS_FILE}...";
# source it
source ${PIHOLE_SETUP_VARS_FILE}
else
# If it can't, show an error
log_write "${PIHOLE_SETUP_VARS_FILE} ${COL_RED}does not exist or cannot be read.${COL_NC}"
fi
}
make_temporary_log() {
# Create a random temporary file for the log
TEMPLOG=$(mktemp /tmp/pihole_temp.XXXXXX)
# Open handle 3 for templog
# https://stackoverflow.com/questions/18460186/writing-outputs-to-log-file-and-console
exec 3>"$TEMPLOG"
# Delete templog, but allow for addressing via file handle
# This lets us write to the log without having a temporary file on the drive, which
# is meant to be a security measure so there is not a lingering file on the drive during the debug process
rm "$TEMPLOG"
}
log_write() {
# echo arguments to both the log and the console
echo -e "${@}" | tee -a /proc/$$/fd/3
}
copy_to_debug_log() {
# Copy the contents of file descriptor 3 into the debug log
cat /proc/$$/fd/3 > "${PIHOLE_DEBUG_LOG}"
}
initialize_debug() {
# Clear the screen so the debug log is readable
clear
show_disclaimer
# Display that the debug process is beginning
log_write "${COL_PURPLE}*** [ INITIALIZING ]${COL_NC}"
# Timestamp the start of the log
log_write "${INFO} $(date "+%Y-%m-%d:%H:%M:%S") debug log has been initialized."
}
# This is a function for visually displaying the curent test that is being run.
# Accepts one variable: the name of what is being diagnosed
# Colors do not show in the dasboard, but the icons do: [i], [✓], and [✗]
echo_current_diagnostic() {
# Colors are used for visually distinguishing each test in the output
# These colors do not show in the GUI, but the formatting will
log_write "\\n${COL_PURPLE}*** [ DIAGNOSING ]:${COL_NC} ${1}"
}
compare_local_version_to_git_version() {
# The git directory to check
local git_dir="${1}"
# The named component of the project (Core or Web)
local pihole_component="${2}"
# If we are checking the Core versions,
if [[ "${pihole_component}" == "Core" ]]; then
# We need to search for "Pi-hole" when using pihole -v
local search_term="Pi-hole"
elif [[ "${pihole_component}" == "Web" ]]; then
# We need to search for "AdminLTE" so store it in a variable as well
#shellcheck disable=2034
local search_term="AdminLTE"
fi
# Display what we are checking
echo_current_diagnostic "${pihole_component} version"
# Store the error message in a variable in case we want to change and/or reuse it
local error_msg="git status failed"
# If the pihole git directory exists,
if [[ -d "${git_dir}" ]]; then
# move into it
cd "${git_dir}" || \
# If not, show an error
log_write "${COL_RED}Could not cd into ${git_dir}$COL_NC"
if git status &> /dev/null; then
# The current version the user is on
local remote_version
remote_version=$(git describe --tags --abbrev=0);
# What branch they are on
local remote_branch
remote_branch=$(git rev-parse --abbrev-ref HEAD);
# The commit they are on
local remote_commit
remote_commit=$(git describe --long --dirty --tags --always)
# Status of the repo
local local_status
local_status=$(git status -s)
# echo this information out to the user in a nice format
# If the current version matches what pihole -v produces, the user is up-to-date
if [[ "${remote_version}" == "$(pihole -v | awk '/${search_term}/ {print $6}' | cut -d ')' -f1)" ]]; then
log_write "${TICK} ${pihole_component}: ${COL_GREEN}${remote_version}${COL_NC}"
# If not,
else
# echo the current version in yellow, signifying it's something to take a look at, but not a critical error
# Also add a URL to an FAQ
log_write "${INFO} ${pihole_component}: ${COL_YELLOW}${remote_version:-Untagged}${COL_NC} (${FAQ_UPDATE_PI_HOLE})"
fi
# If the repo is on the master branch, they are on the stable codebase
if [[ "${remote_branch}" == "master" ]]; then
# so the color of the text is green
log_write "${INFO} Branch: ${COL_GREEN}${remote_branch}${COL_NC}"
# If it is any other branch, they are in a developement branch
else
# So show that in yellow, signifying it's something to take a look at, but not a critical error
log_write "${INFO} Branch: ${COL_YELLOW}${remote_branch:-Detached}${COL_NC} (${FAQ_CHECKOUT_COMMAND})"
fi
# echo the current commit
log_write "${INFO} Commit: ${remote_commit}"
# if `local_status` is non-null, then the repo is not clean, display details here
if [[ ${local_status} ]]; then
#Replace new lines in the status with 12 spaces to make the output cleaner
log_write "${INFO} Status: ${local_status//$'\n'/'\n '}"
local local_diff
local_diff=$(git diff)
if [[ ${local_diff} ]]; then
log_write "${INFO} Diff: ${local_diff//$'\n'/'\n '}"
fi
fi
# If git status failed,
else
# Return an error message
log_write "${error_msg}"
# and exit with a non zero code
return 1
fi
else
:
fi
}
check_ftl_version() {
local ftl_name="FTL"
echo_current_diagnostic "${ftl_name} version"
# Use the built in command to check FTL's version
FTL_VERSION=$(pihole-FTL version)
# Compare the current FTL version to the remote version
if [[ "${FTL_VERSION}" == "$(pihole -v | awk '/FTL/ {print $6}' | cut -d ')' -f1)" ]]; then
# If they are the same, FTL is up-to-date
log_write "${TICK} ${ftl_name}: ${COL_GREEN}${FTL_VERSION}${COL_NC}"
else
# If not, show it in yellow, signifying there is an update
log_write "${TICK} ${ftl_name}: ${COL_YELLOW}${FTL_VERSION}${COL_NC} (${FAQ_UPDATE_PI_HOLE})"
fi
}
# Checks the core version of the Pi-hole codebase
check_component_versions() {
# Check the Web version, branch, and commit
compare_local_version_to_git_version "${CORE_GIT_DIRECTORY}" "Core"
# Check the Web version, branch, and commit
compare_local_version_to_git_version "${WEB_GIT_DIRECTORY}" "Web"
# Check the FTL version
check_ftl_version
}
get_program_version() {
local program_name="${1}"
# Create a loval variable so this function can be safely reused
local program_version
echo_current_diagnostic "${program_name} version"
# Evalutate the program we are checking, if it is any of the ones below, show the version
case "${program_name}" in
"lighttpd") program_version="$(${program_name} -v |& head -n1 | cut -d '/' -f2 | cut -d ' ' -f1)"
;;
"php") program_version="$(${program_name} -v |& head -n1 | cut -d '-' -f1 | cut -d ' ' -f2)"
;;
# If a match is not found, show an error
*) echo "Unrecognized program";
esac
# If the program does not have a version (the variable is empty)
if [[ -z "${program_version}" ]]; then
# Display and error
log_write "${CROSS} ${COL_RED}${program_name} version could not be detected.${COL_NC}"
else
# Otherwise, display the version
log_write "${INFO} ${program_version}"
fi
}
# These are the most critical dependencies of Pi-hole, so we check for them
# and their versions, using the functions above.
check_critical_program_versions() {
# Use the function created earlier and bundle them into one function that checks all the version numbers
get_program_version "lighttpd"
get_program_version "php"
}
is_os_supported() {
local os_to_check="${1}"
# Strip just the base name of the system using sed
# shellcheck disable=SC2001
the_os=$(echo "${os_to_check}" | sed 's/ .*//')
# If the variable is one of our supported OSes,
case "${the_os}" in
# Print it in green
"Raspbian") log_write "${TICK} ${COL_GREEN}${os_to_check}${COL_NC}";;
"Ubuntu") log_write "${TICK} ${COL_GREEN}${os_to_check}${COL_NC}";;
"Fedora") log_write "${TICK} ${COL_GREEN}${os_to_check}${COL_NC}";;
"Debian") log_write "${TICK} ${COL_GREEN}${os_to_check}${COL_NC}";;
"CentOS") log_write "${TICK} ${COL_GREEN}${os_to_check}${COL_NC}";;
# If not, show it in red and link to our software requirements page
*) log_write "${CROSS} ${COL_RED}${os_to_check}${COL_NC} (${FAQ_HARDWARE_REQUIREMENTS})";
esac
}
get_distro_attributes() {
# Put the current Internal Field Separator into another variable so it can be restored later
OLD_IFS="$IFS"
# Store the distro info in an array and make it global since the OS won't change,
# but we'll keep it within the function for better unit testing
local distro_info
#shellcheck disable=SC2016
IFS=$'\r\n' command eval 'distro_info=( $(cat /etc/*release) )'
# Set a named variable for better readability
local distro_attribute
# For each line found in an /etc/*release file,
for distro_attribute in "${distro_info[@]}"; do
# store the key in a variable
local pretty_name_key
pretty_name_key=$(echo "${distro_attribute}" | grep "PRETTY_NAME" | cut -d '=' -f1)
# we need just the OS PRETTY_NAME,
if [[ "${pretty_name_key}" == "PRETTY_NAME" ]]; then
# so save in in a variable when we find it
PRETTY_NAME_VALUE=$(echo "${distro_attribute}" | grep "PRETTY_NAME" | cut -d '=' -f2- | tr -d '"')
# then pass it as an argument that checks if the OS is supported
is_os_supported "${PRETTY_NAME_VALUE}"
else
# Since we only need the pretty name, we can just skip over anything that is not a match
:
fi
done
# Set the IFS back to what it was
IFS="$OLD_IFS"
}
diagnose_operating_system() {
# error message in a variable so we can easily modify it later (or re-use it)
local error_msg="Distribution unknown -- most likely you are on an unsupported platform and may run into issues."
# Display the current test that is running
echo_current_diagnostic "Operating system"
# If there is a /etc/*release file, it's probably a supported operating system, so we can
if ls /etc/*release 1> /dev/null 2>&1; then
# display the attributes to the user from the function made earlier
get_distro_attributes
else
# If it doesn't exist, it's not a system we currently support and link to FAQ
log_write "${CROSS} ${COL_RED}${error_msg}${COL_NC} (${FAQ_HARDWARE_REQUIREMENTS})"
fi
}
check_selinux() {
# SELinux is not supported by the Pi-hole
echo_current_diagnostic "SELinux"
# Check if a SELinux configuration file exists
if [[ -f /etc/selinux/config ]]; then
# If a SELinux configuration file was found, check the default SELinux mode.
DEFAULT_SELINUX=$(awk -F= '/^SELINUX=/ {print $2}' /etc/selinux/config)
case "${DEFAULT_SELINUX,,}" in
enforcing)
log_write "${CROSS} ${COL_RED}Default SELinux: $DEFAULT_SELINUX${COL_NC}"
;;
*) # 'permissive' and 'disabled'
log_write "${TICK} ${COL_GREEN}Default SELinux: $DEFAULT_SELINUX${COL_NC}";
;;
esac
# Check the current state of SELinux
CURRENT_SELINUX=$(getenforce)
case "${CURRENT_SELINUX,,}" in
enforcing)
log_write "${CROSS} ${COL_RED}Current SELinux: $CURRENT_SELINUX${COL_NC}"
;;
*) # 'permissive' and 'disabled'
log_write "${TICK} ${COL_GREEN}Current SELinux: $CURRENT_SELINUX${COL_NC}";
;;
esac
else
log_write "${INFO} ${COL_GREEN}SELinux not detected${COL_NC}";
fi
}
processor_check() {
echo_current_diagnostic "Processor"
# Store the processor type in a variable
PROCESSOR=$(uname -m)
# If it does not contain a value,
if [[ -z "${PROCESSOR}" ]]; then
# we couldn't detect it, so show an error
PROCESSOR=$(lscpu | awk '/Architecture/ {print $2}')
log_write "${CROSS} ${COL_RED}${PROCESSOR}${COL_NC} has not been tested with FTL, but may still work: (${FAQ_FTL_COMPATIBILITY})"
else
# Check if the architecture is currently supported for FTL
case "${PROCESSOR}" in
"amd64") log_write "${TICK} ${COL_GREEN}${PROCESSOR}${COL_NC}"
;;
"armv6l") log_write "${TICK} ${COL_GREEN}${PROCESSOR}${COL_NC}"
;;
"armv6") log_write "${TICK} ${COL_GREEN}${PROCESSOR}${COL_NC}"
;;
"armv7l") log_write "${TICK} ${COL_GREEN}${PROCESSOR}${COL_NC}"
;;
"aarch64") log_write "${TICK} ${COL_GREEN}${PROCESSOR}${COL_NC}"
;;
# Otherwise, show the processor type
*) log_write "${INFO} ${PROCESSOR}";
esac
fi
}
parse_setup_vars() {
echo_current_diagnostic "Setup variables"
# If the file exists,
if [[ -r "${PIHOLE_SETUP_VARS_FILE}" ]]; then
# parse it
parse_file "${PIHOLE_SETUP_VARS_FILE}"
else
# If not, show an error
log_write "${CROSS} ${COL_RED}Could not read ${PIHOLE_SETUP_VARS_FILE}.${COL_NC}"
fi
}
parse_locale() {
local pihole_locale
echo_current_diagnostic "Locale"
pihole_locale="$(locale)"
parse_file "${pihole_locale}"
}
does_ip_match_setup_vars() {
# Check for IPv4 or 6
local protocol="${1}"
# IP address to check for
local ip_address="${2}"
# See what IP is in the setupVars.conf file
local setup_vars_ip
setup_vars_ip=$(< ${PIHOLE_SETUP_VARS_FILE} grep IPV"${protocol}"_ADDRESS | cut -d '=' -f2)
# If it's an IPv6 address
if [[ "${protocol}" == "6" ]]; then
# Strip off the / (CIDR notation)
if [[ "${ip_address%/*}" == "${setup_vars_ip%/*}" ]]; then
# if it matches, show it in green
log_write " ${COL_GREEN}${ip_address%/*}${COL_NC} matches the IP found in ${PIHOLE_SETUP_VARS_FILE}"
else
# otherwise show it in red with an FAQ URL
log_write " ${COL_RED}${ip_address%/*}${COL_NC} does not match the IP found in ${PIHOLE_SETUP_VARS_FILE} (${FAQ_ULA})"
fi
else
# if the protocol isn't 6, it's 4 so no need to strip the CIDR notation
# since it exists in the setupVars.conf that way
if [[ "${ip_address}" == "${setup_vars_ip}" ]]; then
# show in green if it matches
log_write " ${COL_GREEN}${ip_address}${COL_NC} matches the IP found in ${PIHOLE_SETUP_VARS_FILE}"
else
# otherwise show it in red
log_write " ${COL_RED}${ip_address}${COL_NC} does not match the IP found in ${PIHOLE_SETUP_VARS_FILE} (${FAQ_ULA})"
fi
fi
}
detect_ip_addresses() {
# First argument should be a 4 or a 6
local protocol=${1}
# Use ip to show the addresses for the chosen protocol
# Store the values in an arry so they can be looped through
# Get the lines that are in the file(s) and store them in an array for parsing later
mapfile -t ip_addr_list < <(ip -"${protocol}" addr show dev "${PIHOLE_INTERFACE}" | awk -F ' ' '{ for(i=1;i<=NF;i++) if ($i ~ '/^inet/') print $(i+1) }')
# If there is something in the IP address list,
if [[ -n ${ip_addr_list[*]} ]]; then
# Local iterator
local i
# Display the protocol and interface
log_write "${TICK} IPv${protocol} address(es) bound to the ${PIHOLE_INTERFACE} interface:"
# Since there may be more than one IP address, store them in an array
for i in "${!ip_addr_list[@]}"; do
# For each one in the list, print it out
does_ip_match_setup_vars "${protocol}" "${ip_addr_list[$i]}"
done
# Print a blank line just for formatting
log_write ""
else
# If there are no IPs detected, explain that the protocol is not configured
log_write "${CROSS} ${COL_RED}No IPv${protocol} address(es) found on the ${PIHOLE_INTERFACE}${COL_NC} interface.\\n"
return 1
fi
# If the protocol is v6
if [[ "${protocol}" == "6" ]]; then
# let the user know that as long as there is one green address, things should be ok
log_write " ^ Please note that you may have more than one IP address listed."
log_write " As long as one of them is green, and it matches what is in ${PIHOLE_SETUP_VARS_FILE}, there is no need for concern.\\n"
log_write " The link to the FAQ is for an issue that sometimes occurs when the IPv6 address changes, which is why we check for it.\\n"
fi
}
ping_ipv4_or_ipv6() {
# Give the first argument a readable name (a 4 or a six should be the argument)
local protocol="${1}"
# If the protocol is 6,
if [[ ${protocol} == "6" ]]; then
# use ping6
cmd="ping6"
# and Google's public IPv6 address
public_address="2001:4860:4860::8888"
else
# Otherwise, just use ping
cmd="ping"
# and Google's public IPv4 address
public_address="8.8.8.8"
fi
}
ping_gateway() {
local protocol="${1}"
ping_ipv4_or_ipv6 "${protocol}"
# Check if we are using IPv4 or IPv6
# Find the default gateway using IPv4 or IPv6
local gateway
gateway="$(ip -"${protocol}" route | grep default | cut -d ' ' -f 3)"
# If the gateway variable has a value (meaning a gateway was found),
if [[ -n "${gateway}" ]]; then
log_write "${INFO} Default IPv${protocol} gateway: ${gateway}"
# Let the user know we will ping the gateway for a response
log_write " * Pinging ${gateway}..."
# Try to quietly ping the gateway 3 times, with a timeout of 3 seconds, using numeric output only,
# on the pihole interface, and tail the last three lines of the output
# If pinging the gateway is not successful,
if ! ${cmd} -c 1 -W 2 -n "${gateway}" -I "${PIHOLE_INTERFACE}" >/dev/null; then
# let the user know
log_write "${CROSS} ${COL_RED}Gateway did not respond.${COL_NC} ($FAQ_GATEWAY)\\n"
# and return an error code
return 1
# Otherwise,
else
# show a success
log_write "${TICK} ${COL_GREEN}Gateway responded.${COL_NC}"
# and return a success code
return 0
fi
fi
}
ping_internet() {
local protocol="${1}"
# Ping a public address using the protocol passed as an argument
ping_ipv4_or_ipv6 "${protocol}"
log_write "* Checking Internet connectivity via IPv${protocol}..."
# Try to ping the address 3 times
if ! ${cmd} -c 1 -W 2 -n ${public_address} -I "${PIHOLE_INTERFACE}" >/dev/null; then
# if it's unsuccessful, show an error
log_write "${CROSS} ${COL_RED}Cannot reach the Internet.${COL_NC}\\n"
return 1
else
# Otherwise, show success
log_write "${TICK} ${COL_GREEN}Query responded.${COL_NC}\\n"
return 0
fi
}
compare_port_to_service_assigned() {
local service_name="${1}"
# The programs we use may change at some point, so they are in a varible here
local resolver="pihole-FTL"
local web_server="lighttpd"
local ftl="pihole-FTL"
# If the service is a Pi-hole service, highlight it in green
if [[ "${service_name}" == "${resolver}" ]] || [[ "${service_name}" == "${web_server}" ]] || [[ "${service_name}" == "${ftl}" ]]; then
log_write "[${COL_GREEN}${port_number}${COL_NC}] is in use by ${COL_GREEN}${service_name}${COL_NC}"
# Otherwise,
else
# Show the service name in red since it's non-standard
log_write "[${COL_RED}${port_number}${COL_NC}] is in use by ${COL_RED}${service_name}${COL_NC} (${FAQ_HARDWARE_REQUIREMENTS_PORTS})"
fi
}
check_required_ports() {
echo_current_diagnostic "Ports in use"
# Since Pi-hole needs 53, 80, and 4711, check what they are being used by
# so we can detect any issues
local resolver="pihole-FTL"
local web_server="lighttpd"
local ftl="pihole-FTL"
# Create an array for these ports in use
ports_in_use=()
# Sort the addresses and remove duplicates
while IFS= read -r line; do
ports_in_use+=( "$line" )
done < <( lsof -iTCP -sTCP:LISTEN -P -n +c 10 )
# Now that we have the values stored,
for i in "${!ports_in_use[@]}"; do
# loop through them and assign some local variables
local service_name
service_name=$(echo "${ports_in_use[$i]}" | awk '{print $1}')
local protocol_type
protocol_type=$(echo "${ports_in_use[$i]}" | awk '{print $5}')
local port_number
port_number="$(echo "${ports_in_use[$i]}" | awk '{print $9}')"
# Skip the line if it's the titles of the columns the lsof command produces
if [[ "${service_name}" == COMMAND ]]; then
continue
fi
# Use a case statement to determine if the right services are using the right ports
case "$(echo "$port_number" | rev | cut -d: -f1 | rev)" in
53) compare_port_to_service_assigned "${resolver}"
;;
80) compare_port_to_service_assigned "${web_server}"
;;
4711) compare_port_to_service_assigned "${ftl}"
;;
# If it's not a default port that Pi-hole needs, just print it out for the user to see
*) log_write "${port_number} ${service_name} (${protocol_type})";
esac
done
}
check_networking() {
# Runs through several of the functions made earlier; we just clump them
# together since they are all related to the networking aspect of things
echo_current_diagnostic "Networking"
detect_ip_addresses "4"
detect_ip_addresses "6"
ping_gateway "4"
ping_gateway "6"
check_required_ports
}
check_x_headers() {
# The X-Headers allow us to determine from the command line if the Web
# lighttpd.conf has a directive to show "X-Pi-hole: A black hole for Internet advertisements."
# in the header of any Pi-holed domain
# Similarly, it will show "X-Pi-hole: The Pi-hole Web interface is working!" if you view the header returned
# when accessing the dashboard (i.e curl -I pi.hole/admin/)
# server is operating correctly
echo_current_diagnostic "Dashboard and block page"
# Use curl -I to get the header and parse out just the X-Pi-hole one
local block_page
block_page=$(curl -Is localhost | awk '/X-Pi-hole/' | tr -d '\r')
# Do it for the dashboard as well, as the header is different than above
local dashboard
dashboard=$(curl -Is localhost/admin/ | awk '/X-Pi-hole/' | tr -d '\r')
# Store what the X-Header shoud be in variables for comparision later
local block_page_working
block_page_working="X-Pi-hole: A black hole for Internet advertisements."
local dashboard_working
dashboard_working="X-Pi-hole: The Pi-hole Web interface is working!"
local full_curl_output_block_page
full_curl_output_block_page="$(curl -Is localhost)"
local full_curl_output_dashboard
full_curl_output_dashboard="$(curl -Is localhost/admin/)"
# If the X-header found by curl matches what is should be,
if [[ $block_page == "$block_page_working" ]]; then
# display a success message
log_write "$TICK Block page X-Header: ${COL_GREEN}${block_page}${COL_NC}"
else
# Otherwise, show an error
log_write "$CROSS Block page X-Header: ${COL_RED}X-Header does not match or could not be retrieved.${COL_NC}"
log_write "${COL_RED}${full_curl_output_block_page}${COL_NC}"
fi
# Same logic applies to the dashbord as above, if the X-Header matches what a working system shoud have,
if [[ $dashboard == "$dashboard_working" ]]; then
# then we can show a success
log_write "$TICK Web interface X-Header: ${COL_GREEN}${dashboard}${COL_NC}"
else
# Othewise, it's a failure since the X-Headers either don't exist or have been modified in some way
log_write "$CROSS Web interface X-Header: ${COL_RED}X-Header does not match or could not be retrieved.${COL_NC}"
log_write "${COL_RED}${full_curl_output_dashboard}${COL_NC}"
fi
}
dig_at() {
# We need to test if Pi-hole can properly resolve domain names
# as it is an essential piece of the software
# Store the arguments as variables with names
local protocol="${1}"
local IP="${2}"
echo_current_diagnostic "Name resolution (IPv${protocol}) using a random blocked domain and a known ad-serving domain"
# Set more local variables
# We need to test name resolution locally, via Pi-hole, and via a public resolver
local local_dig
local pihole_dig
local remote_dig
# Use a static domain that we know has IPv4 and IPv6 to avoid false positives
# Sometimes the randomly chosen domains don't use IPv6, or something else is wrong with them
local remote_url="doubleclick.com"
# If the protocol (4 or 6) is 6,
if [[ ${protocol} == "6" ]]; then
# Set the IPv6 variables and record type
local local_address="::1"
local pihole_address="${IP}"
local remote_address="2001:4860:4860::8888"
local record_type="AAAA"
# Othwerwise, it should be 4
else
# so use the IPv4 values
local local_address="127.0.0.1"
local pihole_address="${IP}"
local remote_address="8.8.8.8"
local record_type="A"
fi
# Find a random blocked url that has not been whitelisted.
# This helps emulate queries to different domains that a user might query
# It will also give extra assurance that Pi-hole is correctly resolving and blocking domains
local random_url
random_url=$(sqlite3 "${PIHOLE_GRAVITY_DB_FILE}" "SELECT domain FROM vw_gravity ORDER BY RANDOM() LIMIT 1")
# First, do a dig on localhost to see if Pi-hole can use itself to block a domain
if local_dig=$(dig +tries=1 +time=2 -"${protocol}" "${random_url}" @${local_address} +short "${record_type}"); then
# If it can, show sucess
log_write "${TICK} ${random_url} ${COL_GREEN}is ${local_dig}${COL_NC} via ${COL_CYAN}localhost$COL_NC (${local_address})"
else
# Otherwise, show a failure
log_write "${CROSS} ${COL_RED}Failed to resolve${COL_NC} ${random_url} via ${COL_RED}localhost${COL_NC} (${local_address})"
fi
# Next we need to check if Pi-hole can resolve a domain when the query is sent to it's IP address
# This better emulates how clients will interact with Pi-hole as opposed to above where Pi-hole is
# just asing itself locally
# The default timeouts and tries are reduced in case the DNS server isn't working, so the user isn't waiting for too long
# If Pi-hole can dig itself from it's IP (not the loopback address)
if pihole_dig=$(dig +tries=1 +time=2 -"${protocol}" "${random_url}" @"${pihole_address}" +short "${record_type}"); then
# show a success
log_write "${TICK} ${random_url} ${COL_GREEN}is ${pihole_dig}${COL_NC} via ${COL_CYAN}Pi-hole${COL_NC} (${pihole_address})"
else
# Othewise, show a failure
log_write "${CROSS} ${COL_RED}Failed to resolve${COL_NC} ${random_url} via ${COL_RED}Pi-hole${COL_NC} (${pihole_address})"
fi
# Finally, we need to make sure legitimate queries can out to the Internet using an external, public DNS server
# We are using the static remote_url here instead of a random one because we know it works with IPv4 and IPv6
if remote_dig=$(dig +tries=1 +time=2 -"${protocol}" "${remote_url}" @${remote_address} +short "${record_type}" | head -n1); then
# If successful, the real IP of the domain will be returned instead of Pi-hole's IP
log_write "${TICK} ${remote_url} ${COL_GREEN}is ${remote_dig}${COL_NC} via ${COL_CYAN}a remote, public DNS server${COL_NC} (${remote_address})"
else
# Otherwise, show an error
log_write "${CROSS} ${COL_RED}Failed to resolve${COL_NC} ${remote_url} via ${COL_RED}a remote, public DNS server${COL_NC} (${remote_address})"
fi
}
process_status(){
# Check to make sure Pi-hole's services are running and active
echo_current_diagnostic "Pi-hole processes"
# Local iterator
local i
# For each process,
for i in "${PIHOLE_PROCESSES[@]}"; do
# If systemd
if command -v systemctl &> /dev/null; then
# get its status via systemctl
local status_of_process
status_of_process=$(systemctl is-active "${i}")
else
# Otherwise, use the service command and mock the output of `systemctl is-active`
local status_of_process
if service "${i}" status | grep -E 'is\srunning' &> /dev/null; then
status_of_process="active"
else
status_of_process="inactive"
fi
fi
# and print it out to the user
if [[ "${status_of_process}" == "active" ]]; then
# If it's active, show it in green
log_write "${TICK} ${COL_GREEN}${i}${COL_NC} daemon is ${COL_GREEN}${status_of_process}${COL_NC}"
else
# If it's not, show it in red
log_write "${CROSS} ${COL_RED}${i}${COL_NC} daemon is ${COL_RED}${status_of_process}${COL_NC}"
fi
done
}
make_array_from_file() {
local filename="${1}"
# The second argument can put a limit on how many line should be read from the file
# Since some of the files are so large, this is helpful to limit the output
local limit=${2}
# A local iterator for testing if we are at the limit above
local i=0
# Set the array to be empty so we can start fresh when the function is used
local file_content=()
# If the file is a directory
if [[ -d "${filename}" ]]; then
# do nothing since it cannot be parsed
:
else
# Otherwise, read the file line by line
while IFS= read -r line;do
# Othwerise, strip out comments and blank lines
new_line=$(echo "${line}" | sed -e 's/#.*$//' -e '/^$/d')
# If the line still has content (a non-zero value)
if [[ -n "${new_line}" ]]; then
# Put it into the array
file_content+=("${new_line}")
else
# Otherwise, it's a blank line or comment, so do nothing
:
fi
# Increment the iterator +1
i=$((i+1))
# but if the limit of lines we want to see is exceeded
if [[ -z ${limit} ]]; then
# do nothing
:
elif [[ $i -eq ${limit} ]]; then
break
fi
done < "${filename}"
# Now the we have made an array of the file's content
for each_line in "${file_content[@]}"; do
# Print each line
# At some point, we may want to check the file line-by-line, so that's the reason for an array
log_write " ${each_line}"
done
fi
}
parse_file() {
# Set the first argument passed to this function as a named variable for better readability
local filename="${1}"
# Put the current Internal Field Separator into another variable so it can be restored later
OLD_IFS="$IFS"
# Get the lines that are in the file(s) and store them in an array for parsing later
local file_info
if [[ -f "$filename" ]]; then
#shellcheck disable=SC2016
IFS=$'\r\n' command eval 'file_info=( $(cat "${filename}") )'
else
read -r -a file_info <<< "$filename"
fi
# Set a named variable for better readability
local file_lines
# For each line in the file,
for file_lines in "${file_info[@]}"; do
if [[ ! -z "${file_lines}" ]]; then
# don't include the Web password hash
[[ "${file_lines}" =~ ^\#.*$ || ! "${file_lines}" || "${file_lines}" == "WEBPASSWORD="* ]] && continue
# otherwise, display the lines of the file
log_write " ${file_lines}"
fi
done
# Set the IFS back to what it was
IFS="$OLD_IFS"
}
check_name_resolution() {
# Check name resoltion from localhost, Pi-hole's IP, and Google's name severs
# using the function we created earlier
dig_at 4 "${IPV4_ADDRESS%/*}"
# If IPv6 enabled,
if [[ "${IPV6_ADDRESS}" ]]; then
# check resolution
dig_at 6 "${IPV6_ADDRESS%/*}"
fi
}
# This function can check a directory exists
# Pi-hole has files in several places, so we will reuse this function
dir_check() {
# Set the first argument passed to tihs function as a named variable for better readability
local directory="${1}"
# Display the current test that is running
echo_current_diagnostic "contents of ${COL_CYAN}${directory}${COL_NC}"
# For each file in the directory,
for filename in ${directory}; do
# check if exists first; if it does,
if ls "${filename}" 1> /dev/null 2>&1; then
# do nothing
:
else
# Otherwise, show an error
log_write "${COL_RED}${directory} does not exist.${COL_NC}"
fi
done
}
list_files_in_dir() {
# Set the first argument passed to tihs function as a named variable for better readability
local dir_to_parse="${1}"
# Store the files found in an array
mapfile -t files_found < <(ls "${dir_to_parse}")
# For each file in the array,
for each_file in "${files_found[@]}"; do
if [[ -d "${dir_to_parse}/${each_file}" ]]; then
# If it's a directoy, do nothing
:
elif [[ "${dir_to_parse}/${each_file}" == "${PIHOLE_DEBUG_LOG}" ]] || \
[[ "${dir_to_parse}/${each_file}" == "${PIHOLE_RAW_BLOCKLIST_FILES}" ]] || \
[[ "${dir_to_parse}/${each_file}" == "${PIHOLE_INSTALL_LOG_FILE}" ]] || \
[[ "${dir_to_parse}/${each_file}" == "${PIHOLE_SETUP_VARS_FILE}" ]] || \
[[ "${dir_to_parse}/${each_file}" == "${PIHOLE_LOG}" ]] || \
[[ "${dir_to_parse}/${each_file}" == "${PIHOLE_WEB_SERVER_ACCESS_LOG_FILE}" ]] || \
[[ "${dir_to_parse}/${each_file}" == "${PIHOLE_LOG_GZIPS}" ]]; then
:
elif [[ "${dir_to_parse}" == "${SHM_DIRECTORY}" ]]; then
# SHM file - we do not want to see the content, but we want to see the files and their sizes
log_write "$(ls -ld "${dir_to_parse}"/"${each_file}")"
else
# Then, parse the file's content into an array so each line can be analyzed if need be
for i in "${!REQUIRED_FILES[@]}"; do
if [[ "${dir_to_parse}/${each_file}" == "${REQUIRED_FILES[$i]}" ]]; then
# display the filename
log_write "\\n${COL_GREEN}$(ls -ld "${dir_to_parse}"/"${each_file}")${COL_NC}"
# Check if the file we want to view has a limit (because sometimes we just need a little bit of info from the file, not the entire thing)
case "${dir_to_parse}/${each_file}" in
# If it's Web server error log, just give the first 25 lines
"${PIHOLE_WEB_SERVER_ERROR_LOG_FILE}") make_array_from_file "${dir_to_parse}/${each_file}" 25
;;
# Same for the FTL log
"${PIHOLE_FTL_LOG}") head_tail_log "${dir_to_parse}/${each_file}" 35
;;
# parse the file into an array in case we ever need to analyze it line-by-line
*) make_array_from_file "${dir_to_parse}/${each_file}";
esac
else
# Otherwise, do nothing since it's not a file needed for Pi-hole so we don't care about it
:
fi
done
fi
done
}
show_content_of_files_in_dir() {
# Set a local variable for better readability
local directory="${1}"
# Check if the directory exists
dir_check "${directory}"
# if it does, list the files in it
list_files_in_dir "${directory}"
}
show_content_of_pihole_files() {
# Show the content of the files in each of Pi-hole's folders
show_content_of_files_in_dir "${PIHOLE_DIRECTORY}"
show_content_of_files_in_dir "${DNSMASQ_D_DIRECTORY}"
show_content_of_files_in_dir "${WEB_SERVER_CONFIG_DIRECTORY}"
show_content_of_files_in_dir "${CRON_D_DIRECTORY}"
show_content_of_files_in_dir "${WEB_SERVER_LOG_DIRECTORY}"
show_content_of_files_in_dir "${LOG_DIRECTORY}"
show_content_of_files_in_dir "${SHM_DIRECTORY}"
}
head_tail_log() {
# The file being processed
local filename="${1}"
# The number of lines to use for head and tail
local qty="${2}"
local head_line
local tail_line
# Put the current Internal Field Separator into another variable so it can be restored later
OLD_IFS="$IFS"
# Get the lines that are in the file(s) and store them in an array for parsing later
IFS=$'\r\n'
local log_head=()
mapfile -t log_head < <(head -n "${qty}" "${filename}")
log_write " ${COL_CYAN}-----head of $(basename "${filename}")------${COL_NC}"
for head_line in "${log_head[@]}"; do
log_write " ${head_line}"
done
log_write ""
local log_tail=()
mapfile -t log_tail < <(tail -n "${qty}" "${filename}")
log_write " ${COL_CYAN}-----tail of $(basename "${filename}")------${COL_NC}"
for tail_line in "${log_tail[@]}"; do
log_write " ${tail_line}"
done
# Set the IFS back to what it was
IFS="$OLD_IFS"
}
show_db_entries() {
local title="${1}"
local query="${2}"
local widths="${3}"
echo_current_diagnostic "${title}"
OLD_IFS="$IFS"
IFS=$'\r\n'
local entries=()
mapfile -t entries < <(\
sqlite3 "${PIHOLE_GRAVITY_DB_FILE}" \
-cmd ".headers on" \
-cmd ".mode column" \
-cmd ".width ${widths}" \
"${query}"\
)
for line in "${entries[@]}"; do
log_write " ${line}"
done
IFS="$OLD_IFS"
}
show_adlists() {
show_db_entries "Adlists" "SELECT * FROM adlist" "4 100 7 10 13 50"
}
show_whitelist() {
show_db_entries "Whitelist" "SELECT * FROM whitelist" "4 100 7 10 13 50"
}
show_blacklist() {
show_db_entries "Blacklist" "SELECT * FROM blacklist" "4 100 7 10 13 50"
}
show_regexlist() {
show_db_entries "Regexlist" "SELECT * FROM regex" "4 100 7 10 13 50"
}
analyze_gravity_list() {
echo_current_diagnostic "Gravity List and Database"
local gravity_permissions
gravity_permissions=$(ls -ld "${PIHOLE_GRAVITY_DB_FILE}")
log_write "${COL_GREEN}${gravity_permissions}${COL_NC}"
local gravity_size
gravity_size=$(sqlite3 "${PIHOLE_GRAVITY_DB_FILE}" "SELECT COUNT(*) FROM vw_gravity")
log_write " Size (excluding blacklist): ${COL_CYAN}${gravity_size}${COL_NC} entries"
log_write ""
OLD_IFS="$IFS"
IFS=$'\r\n'
local gravity_sample=()
mapfile -t gravity_sample < <(sqlite3 "${PIHOLE_GRAVITY_DB_FILE}" "SELECT domain FROM vw_gravity LIMIT 10")
log_write " ${COL_CYAN}----- First 10 Domains -----${COL_NC}"
for line in "${gravity_sample[@]}"; do
log_write " ${line}"
done
log_write ""
IFS="$OLD_IFS"
}
analyze_pihole_log() {
echo_current_diagnostic "Pi-hole log"
local head_line
# Put the current Internal Field Separator into another variable so it can be restored later
OLD_IFS="$IFS"
# Get the lines that are in the file(s) and store them in an array for parsing later
IFS=$'\r\n'
local pihole_log_permissions
pihole_log_permissions=$(ls -ld "${PIHOLE_LOG}")
log_write "${COL_GREEN}${pihole_log_permissions}${COL_NC}"
local pihole_log_head=()
mapfile -t pihole_log_head < <(head -n 20 ${PIHOLE_LOG})
log_write " ${COL_CYAN}-----head of $(basename ${PIHOLE_LOG})------${COL_NC}"
local error_to_check_for
local line_to_obfuscate
local obfuscated_line
for head_line in "${pihole_log_head[@]}"; do
# A common error in the pihole.log is when there is a non-hosts formatted file
# that the DNS server is attempting to read. Since it's not formatted
# correctly, there will be an entry for "bad address at line n"
# So we can check for that here and highlight it in red so the user can see it easily
error_to_check_for=$(echo "${head_line}" | grep 'bad address at')
# Some users may not want to have the domains they visit sent to us
# To that end, we check for lines in the log that would contain a domain name
line_to_obfuscate=$(echo "${head_line}" | grep ': query\|: forwarded\|: reply')
# If the variable contains a value, it found an error in the log
if [[ -n ${error_to_check_for} ]]; then
# So we can print it in red to make it visible to the user
log_write " ${CROSS} ${COL_RED}${head_line}${COL_NC} (${FAQ_BAD_ADDRESS})"
else
# If the variable does not a value (the current default behavior), so do not obfuscate anything
if [[ -z ${OBFUSCATE} ]]; then
log_write " ${head_line}"
# Othwerise, a flag was passed to this command to obfuscate domains in the log
else
# So first check if there are domains in the log that should be obfuscated
if [[ -n ${line_to_obfuscate} ]]; then
# If there are, we need to use awk to replace only the domain name (the 6th field in the log)
# so we substitue the domain for the placeholder value
obfuscated_line=$(echo "${line_to_obfuscate}" | awk -v placeholder="${OBFUSCATED_PLACEHOLDER}" '{sub($6,placeholder); print $0}')
log_write " ${obfuscated_line}"
else
log_write " ${head_line}"
fi
fi
fi
done
log_write ""
# Set the IFS back to what it was
IFS="$OLD_IFS"
}
tricorder_use_nc_or_curl() {
# Users can submit their debug logs using nc (unencrypted) or curl (encrypted) if available
# Check for curl first since encryption is a good thing
if command -v curl &> /dev/null; then
# If the command exists,
log_write " * Using ${COL_GREEN}curl${COL_NC} for transmission."
# transmit he log via TLS and store the token returned in a variable
tricorder_token=$(curl --silent --upload-file ${PIHOLE_DEBUG_LOG} https://tricorder.pi-hole.net:${TRICORDER_SSL_PORT_NUMBER})
# Otherwise,
else
# use net cat
log_write "${INFO} Using ${COL_YELLOW}netcat${COL_NC} for transmission."
# Save the token returned by our server in a variable
tricorder_token=$(< ${PIHOLE_DEBUG_LOG} nc tricorder.pi-hole.net ${TRICORDER_NC_PORT_NUMBER})
fi
}
upload_to_tricorder() {
local username="pihole"
# Set the permissions and owner
chmod 644 ${PIHOLE_DEBUG_LOG}
chown "$USER":"${username}" ${PIHOLE_DEBUG_LOG}
# Let the user know debugging is complete with something strikingly visual
log_write ""
log_write "${COL_PURPLE}********************************************${COL_NC}"
log_write "${COL_PURPLE}********************************************${COL_NC}"
log_write "${TICK} ${COL_GREEN}** FINISHED DEBUGGING! **${COL_NC}\\n"
# Provide information on what they should do with their token
log_write " * The debug log can be uploaded to tricorder.pi-hole.net for sharing with developers only."
log_write " * For more information, see: ${TRICORDER_CONTEST}"
log_write " * If available, we'll use openssl to upload the log, otherwise it will fall back to netcat."
# If pihole -d is running automatically (usually throught the dashboard)
if [[ "${AUTOMATED}" ]]; then
# let the user know
log_write "${INFO} Debug script running in automated mode"
# and then decide again which tool to use to submit it
tricorder_use_nc_or_curl
# If we're not running in automated mode,
else
echo ""
# give the user a choice of uploading it or not
# Users can review the log file locally (or the output of the script since they are the same) and try to self-diagnose their problem
read -r -p "[?] Would you like to upload the log? [y/N] " response
case ${response} in
# If they say yes, run our function for uploading the log
[yY][eE][sS]|[yY]) tricorder_use_nc_or_curl;;
# If they choose no, just exit out of the script
*) log_write " * Log will ${COL_GREEN}NOT${COL_NC} be uploaded to tricorder.";exit;
esac
fi
# Check if tricorder.pi-hole.net is reachable and provide token
# along with some additional useful information
if [[ -n "${tricorder_token}" ]]; then
# Again, try to make this visually striking so the user realizes they need to do something with this information
# Namely, provide the Pi-hole devs with the token
log_write ""
log_write "${COL_PURPLE}***********************************${COL_NC}"
log_write "${COL_PURPLE}***********************************${COL_NC}"
log_write "${TICK} Your debug token is: ${COL_GREEN}${tricorder_token}${COL_NC}"
log_write "${COL_PURPLE}***********************************${COL_NC}"
log_write "${COL_PURPLE}***********************************${COL_NC}"
log_write ""
log_write " * Provide the token above to the Pi-hole team for assistance at"
log_write " * ${FORUMS_URL}"
log_write " * Your log will self-destruct on our server after ${COL_RED}48 hours${COL_NC}."
# If no token was generated
else
# Show an error and some help instructions
log_write "${CROSS} ${COL_RED}There was an error uploading your debug log.${COL_NC}"
log_write " * Please try again or contact the Pi-hole team for assistance."
fi
# Finally, show where the log file is no matter the outcome of the function so users can look at it
log_write " * A local copy of the debug log can be found at: ${COL_CYAN}${PIHOLE_DEBUG_LOG}${COL_NC}\\n"
}
# Run through all the functions we made
make_temporary_log
initialize_debug
# setupVars.conf needs to be sourced before the networking so the values are
# available to the other functions
source_setup_variables
check_component_versions
check_critical_program_versions
diagnose_operating_system
check_selinux
processor_check
check_networking
check_name_resolution
process_status
parse_setup_vars
check_x_headers
analyze_gravity_list
show_adlists
show_whitelist
show_blacklist
show_regexlist
show_content_of_pihole_files
parse_locale
analyze_pihole_log
copy_to_debug_log
upload_to_tricorder