#!/usr/bin/env bash # Pi-hole: A black hole for Internet advertisements # (c) 2017 Pi-hole, LLC (https://pi-hole.net) # Network-wide ad blocking via your own hardware. # # Generates pihole_debug.log to be used for troubleshooting. # # This file is copyright under the latest version of the EUPL. # Please see LICENSE file for your rights under this license. # shellcheck source=/dev/null # -e option instructs bash to immediately exit if any command [1] has a non-zero exit status # -u a reference to any variable you haven't previously defined # with the exceptions of $* and $@ - is an error, and causes the program to immediately exit # -o pipefail prevents errors in a pipeline from being masked. If any command in a pipeline fails, # that return code will be used as the return code of the whole pipeline. By default, the # pipeline's return code is that of the last command - even if it succeeds set -o pipefail #IFS=$'\n\t' ######## GLOBAL VARS ######## # These variables would normally be next to the other files # but we need them to be first in order to get the colors needed for the script output PIHOLE_SCRIPTS_DIRECTORY="/opt/pihole" PIHOLE_COLTABLE_FILE="${PIHOLE_SCRIPTS_DIRECTORY}/COL_TABLE" # These provide the colors we need for making the log more readable if [[ -f ${PIHOLE_COLTABLE_FILE} ]]; then source ${PIHOLE_COLTABLE_FILE} else COL_NC='\e[0m' # No Color COL_RED='\e[1;91m' COL_GREEN='\e[1;32m' COL_YELLOW='\e[1;33m' COL_PURPLE='\e[1;35m' COL_CYAN='\e[0;36m' TICK="[${COL_GREEN}✓${COL_NC}]" CROSS="[${COL_RED}✗${COL_NC}]" INFO="[i]" #OVER="\r\033[K" fi # shellcheck disable=SC1091 . /etc/pihole/versions # FAQ URLs for use in showing the debug log FAQ_HARDWARE_REQUIREMENTS="${COL_CYAN}https://docs.pi-hole.net/main/prerequisites/${COL_NC}" FAQ_HARDWARE_REQUIREMENTS_PORTS="${COL_CYAN}https://docs.pi-hole.net/main/prerequisites/#ports${COL_NC}" FAQ_HARDWARE_REQUIREMENTS_FIREWALLD="${COL_CYAN}https://docs.pi-hole.net/main/prerequisites/#firewalld${COL_NC}" FAQ_GATEWAY="${COL_CYAN}https://discourse.pi-hole.net/t/why-is-a-default-gateway-important-for-pi-hole/3546${COL_NC}" FAQ_FTL_COMPATIBILITY="${COL_CYAN}https://github.com/pi-hole/FTL#compatibility-list${COL_NC}" # Other URLs we may use FORUMS_URL="${COL_CYAN}https://discourse.pi-hole.net${COL_NC}" # Directories required by Pi-hole # https://discourse.pi-hole.net/t/what-files-does-pi-hole-use/1684 CORE_GIT_DIRECTORY="/etc/.pihole" CRON_D_DIRECTORY="/etc/cron.d" DNSMASQ_D_DIRECTORY="/etc/dnsmasq.d" PIHOLE_DIRECTORY="/etc/pihole" PIHOLE_SCRIPTS_DIRECTORY="/opt/pihole" BIN_DIRECTORY="/usr/local/bin" RUN_DIRECTORY="/run" LOG_DIRECTORY="/var/log/pihole" WEB_SERVER_LOG_DIRECTORY="/var/log/lighttpd" WEB_SERVER_CONFIG_DIRECTORY="/etc/lighttpd" WEB_SERVER_CONFIG_DIRECTORY_FEDORA="${WEB_SERVER_CONFIG_DIRECTORY}/conf.d" WEB_SERVER_CONFIG_DIRECTORY_DEBIAN="${WEB_SERVER_CONFIG_DIRECTORY}/conf-enabled" HTML_DIRECTORY="/var/www/html" WEB_GIT_DIRECTORY="${HTML_DIRECTORY}/admin" SHM_DIRECTORY="/dev/shm" ETC="/etc" # Files required by Pi-hole # https://discourse.pi-hole.net/t/what-files-does-pi-hole-use/1684 PIHOLE_CRON_FILE="${CRON_D_DIRECTORY}/pihole" WEB_SERVER_CONFIG_FILE="${WEB_SERVER_CONFIG_DIRECTORY}/lighttpd.conf" WEB_SERVER_CUSTOM_CONFIG_FILE="${WEB_SERVER_CONFIG_DIRECTORY}/external.conf" WEB_SERVER_PIHOLE_CONFIG_FILE_DEBIAN="${WEB_SERVER_CONFIG_DIRECTORY_DEBIAN}/15-pihole-admin.conf" WEB_SERVER_PIHOLE_CONFIG_FILE_FEDORA="${WEB_SERVER_CONFIG_DIRECTORY_FEDORA}/pihole-admin.conf" PIHOLE_INSTALL_LOG_FILE="${PIHOLE_DIRECTORY}/install.log" PIHOLE_RAW_BLOCKLIST_FILES="${PIHOLE_DIRECTORY}/list.*" PIHOLE_LOCAL_HOSTS_FILE="${PIHOLE_DIRECTORY}/local.list" PIHOLE_LOGROTATE_FILE="${PIHOLE_DIRECTORY}/logrotate" PIHOLE_SETUP_VARS_FILE="${PIHOLE_DIRECTORY}/setupVars.conf" PIHOLE_FTL_CONF_FILE="${PIHOLE_DIRECTORY}/pihole-FTL.conf" PIHOLE_CUSTOM_HOSTS_FILE="${PIHOLE_DIRECTORY}/custom.list" PIHOLE_VERSIONS_FILE="${PIHOLE_DIRECTORY}/versions" # Read the value of an FTL config key. The value is printed to stdout. # # Args: # 1. The key to read # 2. The default if the setting or config does not exist get_ftl_conf_value() { local key=$1 local default=$2 local value # Obtain key=... setting from pihole-FTL.conf if [[ -e "$PIHOLE_FTL_CONF_FILE" ]]; then # Constructed to return nothing when # a) the setting is not present in the config file, or # b) the setting is commented out (e.g. "#DBFILE=...") value="$(sed -n -e "s/^\\s*$key=\\s*//p" ${PIHOLE_FTL_CONF_FILE})" fi # Test for missing value. Use default value in this case. if [[ -z "$value" ]]; then value="$default" fi echo "$value" } PIHOLE_GRAVITY_DB_FILE="$(get_ftl_conf_value "GRAVITYDB" "${PIHOLE_DIRECTORY}/gravity.db")" PIHOLE_FTL_DB_FILE="$(get_ftl_conf_value "DBFILE" "${PIHOLE_DIRECTORY}/pihole-FTL.db")" PIHOLE_COMMAND="${BIN_DIRECTORY}/pihole" PIHOLE_COLTABLE_FILE="${BIN_DIRECTORY}/COL_TABLE" FTL_PID="${RUN_DIRECTORY}/pihole-FTL.pid" PIHOLE_LOG="${LOG_DIRECTORY}/pihole.log" PIHOLE_LOG_GZIPS="${LOG_DIRECTORY}/pihole.log.[0-9].*" PIHOLE_DEBUG_LOG="${LOG_DIRECTORY}/pihole_debug.log" PIHOLE_FTL_LOG="$(get_ftl_conf_value "LOGFILE" "${LOG_DIRECTORY}/FTL.log")" PIHOLE_WEB_SERVER_ACCESS_LOG_FILE="${WEB_SERVER_LOG_DIRECTORY}/access-pihole.log" PIHOLE_WEB_SERVER_ERROR_LOG_FILE="${WEB_SERVER_LOG_DIRECTORY}/error-pihole.log" RESOLVCONF="${ETC}/resolv.conf" DNSMASQ_CONF="${ETC}/dnsmasq.conf" # Store Pi-hole's processes in an array for easy use and parsing PIHOLE_PROCESSES=( "lighttpd" "pihole-FTL" ) # Store the required directories in an array so it can be parsed through REQUIRED_FILES=("${PIHOLE_CRON_FILE}" "${WEB_SERVER_CONFIG_FILE}" "${WEB_SERVER_CUSTOM_CONFIG_FILE}" "${WEB_SERVER_PIHOLE_CONFIG_FILE_DEBIAN}" "${WEB_SERVER_PIHOLE_CONFIG_FILE_FEDORA}" "${PIHOLE_INSTALL_LOG_FILE}" "${PIHOLE_RAW_BLOCKLIST_FILES}" "${PIHOLE_LOCAL_HOSTS_FILE}" "${PIHOLE_LOGROTATE_FILE}" "${PIHOLE_SETUP_VARS_FILE}" "${PIHOLE_FTL_CONF_FILE}" "${PIHOLE_COMMAND}" "${PIHOLE_COLTABLE_FILE}" "${FTL_PID}" "${PIHOLE_LOG}" "${PIHOLE_LOG_GZIPS}" "${PIHOLE_DEBUG_LOG}" "${PIHOLE_FTL_LOG}" "${PIHOLE_WEB_SERVER_ACCESS_LOG_FILE}" "${PIHOLE_WEB_SERVER_ERROR_LOG_FILE}" "${RESOLVCONF}" "${DNSMASQ_CONF}" "${PIHOLE_CUSTOM_HOSTS_FILE}" "${PIHOLE_VERSIONS_FILE}") DISCLAIMER="This process collects information from your Pi-hole, and optionally uploads it to a unique and random directory on tricorder.pi-hole.net. The intent of this script is to allow users to self-diagnose their installations. This is accomplished by running tests against our software and providing the user with links to FAQ articles when a problem is detected. Since we are a small team and Pi-hole has been growing steadily, it is our hope that this will help us spend more time on development. NOTE: All log files auto-delete after 48 hours and ONLY the Pi-hole developers can access your data via the given token. We have taken these extra steps to secure your data and will work to further reduce any personal information gathered. " show_disclaimer(){ log_write "${DISCLAIMER}" } source_setup_variables() { # Display the current test that is running log_write "\\n${COL_PURPLE}*** [ INITIALIZING ]${COL_NC} Sourcing setup variables" # If the variable file exists, if ls "${PIHOLE_SETUP_VARS_FILE}" 1> /dev/null 2>&1; then log_write "${INFO} Sourcing ${PIHOLE_SETUP_VARS_FILE}..."; # source it source ${PIHOLE_SETUP_VARS_FILE} else # If it can't, show an error log_write "${PIHOLE_SETUP_VARS_FILE} ${COL_RED}does not exist or cannot be read.${COL_NC}" fi } make_temporary_log() { # Create a random temporary file for the log TEMPLOG=$(mktemp /tmp/pihole_temp.XXXXXX) # Open handle 3 for templog # https://stackoverflow.com/questions/18460186/writing-outputs-to-log-file-and-console exec 3>"$TEMPLOG" # Delete templog, but allow for addressing via file handle # This lets us write to the log without having a temporary file on the drive, which # is meant to be a security measure so there is not a lingering file on the drive during the debug process rm "$TEMPLOG" } log_write() { # echo arguments to both the log and the console echo -e "${@}" | tee -a /proc/$$/fd/3 } copy_to_debug_log() { # Copy the contents of file descriptor 3 into the debug log cat /proc/$$/fd/3 > "${PIHOLE_DEBUG_LOG}" } initialize_debug() { local system_uptime # Clear the screen so the debug log is readable clear show_disclaimer # Display that the debug process is beginning log_write "${COL_PURPLE}*** [ INITIALIZING ]${COL_NC}" # Timestamp the start of the log log_write "${INFO} $(date "+%Y-%m-%d:%H:%M:%S") debug log has been initialized." # Uptime of the system # credits to https://stackoverflow.com/questions/28353409/bash-format-uptime-to-show-days-hours-minutes system_uptime=$(uptime | awk -F'( |,|:)+' '{if ($7=="min") m=$6; else {if ($7~/^day/){if ($9=="min") {d=$6;m=$8} else {d=$6;h=$8;m=$9}} else {h=$6;m=$7}}} {print d+0,"days,",h+0,"hours,",m+0,"minutes"}') log_write "${INFO} System has been running for ${system_uptime}" } # This is a function for visually displaying the current test that is being run. # Accepts one variable: the name of what is being diagnosed echo_current_diagnostic() { # Colors are used for visually distinguishing each test in the output log_write "\\n${COL_PURPLE}*** [ DIAGNOSING ]:${COL_NC} ${1}" } compare_local_version_to_git_version() { # The git directory to check local git_dir="${1}" # The named component of the project (Core or Web) local pihole_component="${2}" # Display what we are checking echo_current_diagnostic "${pihole_component} version" # Store the error message in a variable in case we want to change and/or reuse it local error_msg="git status failed" # If the pihole git directory exists, if [[ -d "${git_dir}" ]]; then # move into it cd "${git_dir}" || \ # If not, show an error log_write "${COL_RED}Could not cd into ${git_dir}$COL_NC" if git status &> /dev/null; then # The current version the user is on local local_version local_version=$(git describe --tags --abbrev=0); # What branch they are on local local_branch local_branch=$(git rev-parse --abbrev-ref HEAD); # The commit they are on local local_commit local_commit=$(git describe --long --dirty --tags --always) # Status of the repo local local_status local_status=$(git status -s) # echo this information out to the user in a nice format log_write "${TICK} Version: ${local_version}" # Print the repo upstreams remotes=$(git remote -v) log_write "${INFO} Remotes: ${remotes//$'\n'/'\n '}" # If the repo is on the master branch, they are on the stable codebase if [[ "${local_branch}" == "master" ]]; then # so the color of the text is green log_write "${INFO} Branch: ${COL_GREEN}${local_branch}${COL_NC}" # If it is any other branch, they are in a development branch else # So show that in yellow, signifying it's something to take a look at, but not a critical error log_write "${INFO} Branch: ${COL_YELLOW}${local_branch:-Detached}${COL_NC}" fi # echo the current commit log_write "${INFO} Commit: ${local_commit}" # if `local_status` is non-null, then the repo is not clean, display details here if [[ ${local_status} ]]; then # Replace new lines in the status with 12 spaces to make the output cleaner log_write "${INFO} Status: ${local_status//$'\n'/'\n '}" local local_diff local_diff=$(git diff) if [[ ${local_diff} ]]; then log_write "${INFO} Diff: ${local_diff//$'\n'/'\n '}" fi fi # If git status failed, else # Return an error message log_write "${error_msg}" # and exit with a non zero code return 1 fi else # There is no git directory so check if the web interface was disabled local setup_vars_web_interface setup_vars_web_interface=$(< ${PIHOLE_SETUP_VARS_FILE} grep ^INSTALL_WEB_INTERFACE | cut -d '=' -f2) if [[ "${pihole_component}" == "Web" ]] && [[ "${setup_vars_web_interface}" == "false" ]]; then log_write "${INFO} ${pihole_component}: Disabled in setupVars.conf via INSTALL_WEB_INTERFACE=false" else # Return an error message log_write "${COL_RED}Directory ${git_dir} doesn't exist${COL_NC}" # and exit with a non zero code return 1 fi fi } check_ftl_version() { local FTL_VERSION FTL_COMMIT FTL_BRANCH echo_current_diagnostic "FTL version" # Use the built in command to check FTL's version FTL_VERSION=$(pihole-FTL version) FTL_BRANCH=$(pihole-FTL branch) FTL_COMMIT=$(pihole-FTL --hash) log_write "${TICK} Version: ${FTL_VERSION}" # If they use the master branch, they are on the stable codebase if [[ "${FTL_BRANCH}" == "master" ]]; then # so the color of the text is green log_write "${INFO} Branch: ${COL_GREEN}${FTL_BRANCH}${COL_NC}" # If it is any other branch, they are in a development branch else # So show that in yellow, signifying it's something to take a look at, but not a critical error log_write "${INFO} Branch: ${COL_YELLOW}${FTL_BRANCH}${COL_NC}" fi # echo the current commit log_write "${INFO} Commit: ${FTL_COMMIT}" } # Checks the core version of the Pi-hole codebase check_component_versions() { # Check the Web version, branch, and commit compare_local_version_to_git_version "${CORE_GIT_DIRECTORY}" "Core" # Check the Web version, branch, and commit compare_local_version_to_git_version "${WEB_GIT_DIRECTORY}" "Web" # Check the FTL version check_ftl_version } get_program_version() { local program_name="${1}" # Create a local variable so this function can be safely reused local program_version echo_current_diagnostic "${program_name} version" # Evaluate the program we are checking, if it is any of the ones below, show the version case "${program_name}" in "lighttpd") program_version="$(${program_name} -v 2> /dev/null | head -n1 | cut -d '/' -f2 | cut -d ' ' -f1)" ;; "php") program_version="$(${program_name} -v 2> /dev/null | head -n1 | cut -d '-' -f1 | cut -d ' ' -f2)" ;; # If a match is not found, show an error *) echo "Unrecognized program"; esac # If the program does not have a version (the variable is empty) if [[ -z "${program_version}" ]]; then # Display and error log_write "${CROSS} ${COL_RED}${program_name} version could not be detected.${COL_NC}" else # Otherwise, display the version log_write "${INFO} ${program_version}" fi } # These are the most critical dependencies of Pi-hole, so we check for them # and their versions, using the functions above. check_critical_program_versions() { # Use the function created earlier and bundle them into one function that checks all the version numbers get_program_version "lighttpd" get_program_version "php" } os_check() { # This function gets a list of supported OS versions from a TXT record at versions.pi-hole.net # and determines whether or not the script is running on one of those systems local remote_os_domain valid_os valid_version detected_os detected_version cmdResult digReturnCode response remote_os_domain=${OS_CHECK_DOMAIN_NAME:-"versions.pi-hole.net"} detected_os=$(grep "\bID\b" /etc/os-release | cut -d '=' -f2 | tr -d '"') detected_version=$(grep VERSION_ID /etc/os-release | cut -d '=' -f2 | tr -d '"') cmdResult="$(dig +short -t txt "${remote_os_domain}" @ns1.pi-hole.net 2>&1; echo $?)" #Get the return code of the previous command (last line) digReturnCode="${cmdResult##*$'\n'}" # Extract dig response response="${cmdResult%%$'\n'*}" if [ "${digReturnCode}" -ne 0 ]; then log_write "${INFO} Distro: ${detected_os^}" log_write "${INFO} Version: ${detected_version}" log_write "${CROSS} dig return code: ${COL_RED}${digReturnCode}${COL_NC}" log_write "${CROSS} dig response: ${response}" log_write "${CROSS} Error: ${COL_RED}dig command failed - Unable to check OS${COL_NC}" else IFS=" " read -r -a supportedOS < <(echo "${response}" | tr -d '"') for distro_and_versions in "${supportedOS[@]}" do distro_part="${distro_and_versions%%=*}" versions_part="${distro_and_versions##*=}" if [[ "${detected_os^^}" =~ ${distro_part^^} ]]; then valid_os=true IFS="," read -r -a supportedVer <<<"${versions_part}" for version in "${supportedVer[@]}" do if [[ "${detected_version}" =~ $version ]]; then valid_version=true break fi done break fi done local finalmsg if [ "$valid_os" = true ]; then log_write "${TICK} Distro: ${COL_GREEN}${detected_os^}${COL_NC}" if [ "$valid_version" = true ]; then log_write "${TICK} Version: ${COL_GREEN}${detected_version}${COL_NC}" finalmsg="${TICK} ${COL_GREEN}Distro and version supported${COL_NC}" else log_write "${CROSS} Version: ${COL_RED}${detected_version}${COL_NC}" finalmsg="${CROSS} Error: ${COL_RED}${detected_os^} is supported but version ${detected_version} is currently unsupported ${COL_NC}(${FAQ_HARDWARE_REQUIREMENTS})${COL_NC}" fi else log_write "${CROSS} Distro: ${COL_RED}${detected_os^}${COL_NC}" finalmsg="${CROSS} Error: ${COL_RED}${detected_os^} is not a supported distro ${COL_NC}(${FAQ_HARDWARE_REQUIREMENTS})${COL_NC}" fi # Print dig response and the final check result log_write "${TICK} dig return code: ${COL_GREEN}${digReturnCode}${COL_NC}" log_write "${INFO} dig response: ${response}" log_write "${finalmsg}" fi } diagnose_operating_system() { # error message in a variable so we can easily modify it later (or reuse it) local error_msg="Distribution unknown -- most likely you are on an unsupported platform and may run into issues." # Display the current test that is running echo_current_diagnostic "Operating system" # If DOCKER_VERSION is set (Sourced from /etc/pihole/versions at start of script), include this information in the debug output [ -n "${DOCKER_VERSION}" ] && log_write "${INFO} Pi-hole Docker Container: ${DOCKER_VERSION}" # If there is a /etc/*release file, it's probably a supported operating system, so we can if ls /etc/*release 1> /dev/null 2>&1; then # display the attributes to the user from the function made earlier os_check else # If it doesn't exist, it's not a system we currently support and link to FAQ log_write "${CROSS} ${COL_RED}${error_msg}${COL_NC} (${FAQ_HARDWARE_REQUIREMENTS})" fi } check_selinux() { # SELinux is not supported by the Pi-hole echo_current_diagnostic "SELinux" # Check if a SELinux configuration file exists if [[ -f /etc/selinux/config ]]; then # If a SELinux configuration file was found, check the default SELinux mode. DEFAULT_SELINUX=$(awk -F= '/^SELINUX=/ {print $2}' /etc/selinux/config) case "${DEFAULT_SELINUX,,}" in enforcing) log_write "${CROSS} ${COL_RED}Default SELinux: $DEFAULT_SELINUX${COL_NC}" ;; *) # 'permissive' and 'disabled' log_write "${TICK} ${COL_GREEN}Default SELinux: $DEFAULT_SELINUX${COL_NC}"; ;; esac # Check the current state of SELinux CURRENT_SELINUX=$(getenforce) case "${CURRENT_SELINUX,,}" in enforcing) log_write "${CROSS} ${COL_RED}Current SELinux: $CURRENT_SELINUX${COL_NC}" ;; *) # 'permissive' and 'disabled' log_write "${TICK} ${COL_GREEN}Current SELinux: $CURRENT_SELINUX${COL_NC}"; ;; esac else log_write "${INFO} ${COL_GREEN}SELinux not detected${COL_NC}"; fi } check_firewalld() { # FirewallD ships by default on Fedora/CentOS/RHEL and enabled upon clean install # FirewallD is not configured by the installer and is the responsibility of the user echo_current_diagnostic "FirewallD" # Check if FirewallD service is enabled if command -v systemctl &> /dev/null; then # get its status via systemctl local firewalld_status firewalld_status=$(systemctl is-active firewalld) log_write "${INFO} ${COL_GREEN}Firewalld service ${firewalld_status}${COL_NC}"; if [ "${firewalld_status}" == "active" ]; then # test common required service ports local firewalld_enabled_services firewalld_enabled_services=$(firewall-cmd --list-services) local firewalld_expected_services=("http" "dns" "dhcp" "dhcpv6") for i in "${firewalld_expected_services[@]}"; do if [[ "${firewalld_enabled_services}" =~ ${i} ]]; then log_write "${TICK} ${COL_GREEN} Allow Service: ${i}${COL_NC}"; else log_write "${CROSS} ${COL_RED} Allow Service: ${i}${COL_NC} (${FAQ_HARDWARE_REQUIREMENTS_FIREWALLD})" fi done # check for custom FTL FirewallD zone local firewalld_zones firewalld_zones=$(firewall-cmd --get-zones) if [[ "${firewalld_zones}" =~ "ftl" ]]; then log_write "${TICK} ${COL_GREEN}FTL Custom Zone Detected${COL_NC}"; # check FTL custom zone interface: lo local firewalld_ftl_zone_interfaces firewalld_ftl_zone_interfaces=$(firewall-cmd --zone=ftl --list-interfaces) if [[ "${firewalld_ftl_zone_interfaces}" =~ "lo" ]]; then log_write "${TICK} ${COL_GREEN} Local Interface Detected${COL_NC}"; else log_write "${CROSS} ${COL_RED} Local Interface Not Detected${COL_NC} (${FAQ_HARDWARE_REQUIREMENTS_FIREWALLD})" fi # check FTL custom zone port: 4711 local firewalld_ftl_zone_ports firewalld_ftl_zone_ports=$(firewall-cmd --zone=ftl --list-ports) if [[ "${firewalld_ftl_zone_ports}" =~ "4711/tcp" ]]; then log_write "${TICK} ${COL_GREEN} FTL Port 4711/tcp Detected${COL_NC}"; else log_write "${CROSS} ${COL_RED} FTL Port 4711/tcp Not Detected${COL_NC} (${FAQ_HARDWARE_REQUIREMENTS_FIREWALLD})" fi else log_write "${CROSS} ${COL_RED}FTL Custom Zone Not Detected${COL_NC} (${FAQ_HARDWARE_REQUIREMENTS_FIREWALLD})" fi fi else log_write "${TICK} ${COL_GREEN}Firewalld service not detected${COL_NC}"; fi } processor_check() { echo_current_diagnostic "Processor" # Store the processor type in a variable PROCESSOR=$(uname -m) # If it does not contain a value, if [[ -z "${PROCESSOR}" ]]; then # we couldn't detect it, so show an error PROCESSOR=$(lscpu | awk '/Architecture/ {print $2}') log_write "${CROSS} ${COL_RED}${PROCESSOR}${COL_NC} has not been tested with FTL, but may still work: (${FAQ_FTL_COMPATIBILITY})" else # Check if the architecture is currently supported for FTL case "${PROCESSOR}" in "amd64" | "x86_64") log_write "${TICK} ${COL_GREEN}${PROCESSOR}${COL_NC}" ;; "armv6l") log_write "${TICK} ${COL_GREEN}${PROCESSOR}${COL_NC}" ;; "armv6") log_write "${TICK} ${COL_GREEN}${PROCESSOR}${COL_NC}" ;; "armv7l") log_write "${TICK} ${COL_GREEN}${PROCESSOR}${COL_NC}" ;; "aarch64") log_write "${TICK} ${COL_GREEN}${PROCESSOR}${COL_NC}" ;; # Otherwise, show the processor type *) log_write "${INFO} ${PROCESSOR}"; esac fi } disk_usage() { local file_system local hide echo_current_diagnostic "Disk usage" mapfile -t file_system < <(df -h) # Some lines of df might contain sensitive information like usernames and passwords. # E.g. curlftpfs filesystems (https://www.looklinux.com/mount-ftp-share-on-linux-using-curlftps/) # We are not interested in those lines so we collect keyword, to remove them from the output # Additional keywords can be added, separated by "|" hide="curlftpfs" # only show those lines not containing a sensitive phrase for line in "${file_system[@]}"; do if [[ ! $line =~ $hide ]]; then log_write " ${line}" fi done } parse_setup_vars() { echo_current_diagnostic "Setup variables" # If the file exists, if [[ -r "${PIHOLE_SETUP_VARS_FILE}" ]]; then # parse it parse_file "${PIHOLE_SETUP_VARS_FILE}" else # If not, show an error log_write "${CROSS} ${COL_RED}Could not read ${PIHOLE_SETUP_VARS_FILE}.${COL_NC}" fi } parse_locale() { local pihole_locale echo_current_diagnostic "Locale" pihole_locale="$(locale)" parse_file "${pihole_locale}" } detect_ip_addresses() { # First argument should be a 4 or a 6 local protocol=${1} # Use ip to show the addresses for the chosen protocol # Store the values in an array so they can be looped through # Get the lines that are in the file(s) and store them in an array for parsing later mapfile -t ip_addr_list < <(ip -"${protocol}" addr show dev "${PIHOLE_INTERFACE}" | awk -F ' ' '{ for(i=1;i<=NF;i++) if ($i ~ '/^inet/') print $(i+1) }') # If there is something in the IP address list, if [[ -n ${ip_addr_list[*]} ]]; then # Local iterator local i # Display the protocol and interface log_write "${TICK} IPv${protocol} address(es) bound to the ${PIHOLE_INTERFACE} interface:" # Since there may be more than one IP address, store them in an array for i in "${!ip_addr_list[@]}"; do log_write " ${ip_addr_list[$i]}" done # Print a blank line just for formatting log_write "" else # If there are no IPs detected, explain that the protocol is not configured log_write "${CROSS} ${COL_RED}No IPv${protocol} address(es) found on the ${PIHOLE_INTERFACE}${COL_NC} interface.\\n" return 1 fi } ping_ipv4_or_ipv6() { # Give the first argument a readable name (a 4 or a six should be the argument) local protocol="${1}" # If the protocol is 6, if [[ ${protocol} == "6" ]]; then # use ping6 cmd="ping6" # and Google's public IPv6 address public_address="2001:4860:4860::8888" else # Otherwise, just use ping cmd="ping" # and Google's public IPv4 address public_address="8.8.8.8" fi } ping_gateway() { local protocol="${1}" ping_ipv4_or_ipv6 "${protocol}" # Check if we are using IPv4 or IPv6 # Find the default gateways using IPv4 or IPv6 local gateway log_write "${INFO} Default IPv${protocol} gateway(s):" while IFS= read -r gateway; do log_write " ${gateway}" done < <(ip -"${protocol}" route | grep default | grep "${PIHOLE_INTERFACE}" | cut -d ' ' -f 3) gateway=$(ip -"${protocol}" route | grep default | grep "${PIHOLE_INTERFACE}" | cut -d ' ' -f 3 | head -n 1) # If there was at least one gateway if [ -n "${gateway}" ]; then # Let the user know we will ping the gateway for a response log_write " * Pinging first gateway ${gateway}..." # Try to quietly ping the gateway 3 times, with a timeout of 3 seconds, using numeric output only, # on the pihole interface, and tail the last three lines of the output # If pinging the gateway is not successful, if ! ${cmd} -c 1 -W 2 -n "${gateway}" -I "${PIHOLE_INTERFACE}" >/dev/null; then # let the user know log_write "${CROSS} ${COL_RED}Gateway did not respond.${COL_NC} ($FAQ_GATEWAY)\\n" # and return an error code return 1 # Otherwise, else # show a success log_write "${TICK} ${COL_GREEN}Gateway responded.${COL_NC}" # and return a success code return 0 fi fi } ping_internet() { local protocol="${1}" # Ping a public address using the protocol passed as an argument ping_ipv4_or_ipv6 "${protocol}" log_write "* Checking Internet connectivity via IPv${protocol}..." # Try to ping the address 3 times if ! ${cmd} -c 1 -W 2 -n ${public_address} -I "${PIHOLE_INTERFACE}" >/dev/null; then # if it's unsuccessful, show an error log_write "${CROSS} ${COL_RED}Cannot reach the Internet.${COL_NC}\\n" return 1 else # Otherwise, show success log_write "${TICK} ${COL_GREEN}Query responded.${COL_NC}\\n" return 0 fi } compare_port_to_service_assigned() { local service_name local expected_service local port service_name="${2}" expected_service="${1}" port="${3}" # If the service is a Pi-hole service, highlight it in green if [[ "${service_name}" == "${expected_service}" ]]; then log_write "${TICK} ${COL_GREEN}${port}${COL_NC} is in use by ${COL_GREEN}${service_name}${COL_NC}" # Otherwise, else # Show the service name in red since it's non-standard log_write "${CROSS} ${COL_RED}${port}${COL_NC} is in use by ${COL_RED}${service_name}${COL_NC} (${FAQ_HARDWARE_REQUIREMENTS_PORTS})" fi } check_required_ports() { echo_current_diagnostic "Ports in use" # Since Pi-hole needs 53, 80, and 4711, check what they are being used by # so we can detect any issues local resolver="pihole-FTL" local web_server="lighttpd" local ftl="pihole-FTL" # Create an array for these ports in use ports_in_use=() # Sort the addresses and remove duplicates while IFS= read -r line; do ports_in_use+=( "$line" ) done < <( ss --listening --numeric --tcp --udp --processes --no-header ) # Now that we have the values stored, for i in "${!ports_in_use[@]}"; do # loop through them and assign some local variables local service_name service_name=$(echo "${ports_in_use[$i]}" | awk '{gsub(/users:\(\("/,"",$7);gsub(/".*/,"",$7);print $7}') local protocol_type protocol_type=$(echo "${ports_in_use[$i]}" | awk '{print $1}') local port_number port_number="$(echo "${ports_in_use[$i]}" | awk '{print $5}')" # | awk '{gsub(/^.*:/,"",$5);print $5}') # Use a case statement to determine if the right services are using the right ports case "$(echo "${port_number}" | rev | cut -d: -f1 | rev)" in 53) compare_port_to_service_assigned "${resolver}" "${service_name}" "${protocol_type}:${port_number}" ;; 80) compare_port_to_service_assigned "${web_server}" "${service_name}" "${protocol_type}:${port_number}" ;; 4711) compare_port_to_service_assigned "${ftl}" "${service_name}" "${protocol_type}:${port_number}" ;; # If it's not a default port that Pi-hole needs, just print it out for the user to see *) log_write " ${protocol_type}:${port_number} is in use by ${service_name:=}"; esac done } ip_command() { # Obtain and log information from "ip XYZ show" commands echo_current_diagnostic "${2}" local entries=() mapfile -t entries < <(ip "${1}" show) for line in "${entries[@]}"; do log_write " ${line}" done } check_ip_command() { ip_command "addr" "Network interfaces and addresses" ip_command "route" "Network routing table" } check_networking() { # Runs through several of the functions made earlier; we just clump them # together since they are all related to the networking aspect of things echo_current_diagnostic "Networking" detect_ip_addresses "4" detect_ip_addresses "6" ping_gateway "4" ping_gateway "6" # Skip the following check if installed in docker container. Unpriv'ed containers do not have access to the information required # to resolve the service name listening - and the container should not start if there was a port conflict anyway [ -z "${DOCKER_VERSION}" ] && check_required_ports } check_x_headers() { # The X-Headers allow us to determine from the command line if the Web # lighttpd.conf has a directive to show "X-Pi-hole: A black hole for Internet advertisements." # in the header of any Pi-holed domain # Similarly, it will show "X-Pi-hole: The Pi-hole Web interface is working!" if you view the header returned # when accessing the dashboard (i.e curl -I pi.hole/admin/) # server is operating correctly echo_current_diagnostic "Dashboard headers" # Use curl -I to get the header and parse out just the X-Pi-hole one local full_curl_output_dashboard local dashboard full_curl_output_dashboard="$(curl -Is localhost/admin/)" dashboard=$(echo "${full_curl_output_dashboard}" | awk '/X-Pi-hole/' | tr -d '\r') # Store what the X-Header should be in variables for comparison later local dashboard_working dashboard_working="X-Pi-hole: The Pi-hole Web interface is working!" # If the X-Header matches what a working system should have, if [[ $dashboard == "$dashboard_working" ]]; then # then we can show a success log_write "$TICK Web interface X-Header: ${COL_GREEN}${dashboard}${COL_NC}" else # Otherwise, it's a failure since the X-Headers either don't exist or have been modified in some way log_write "$CROSS Web interface X-Header: ${COL_RED}X-Header does not match or could not be retrieved.${COL_NC}" log_write "${COL_RED}${full_curl_output_dashboard}${COL_NC}" fi } dig_at() { # We need to test if Pi-hole can properly resolve domain names # as it is an essential piece of the software # Store the arguments as variables with names local protocol="${1}" echo_current_diagnostic "Name resolution (IPv${protocol}) using a random blocked domain and a known ad-serving domain" # Set more local variables # We need to test name resolution locally, via Pi-hole, and via a public resolver local local_dig local remote_dig local interfaces local addresses # Use a static domain that we know has IPv4 and IPv6 to avoid false positives # Sometimes the randomly chosen domains don't use IPv6, or something else is wrong with them local remote_url="doubleclick.com" # If the protocol (4 or 6) is 6, if [[ ${protocol} == "6" ]]; then # Set the IPv6 variables and record type local local_address="::1" local remote_address="2001:4860:4860::8888" local sed_selector="inet6" local record_type="AAAA" # Otherwise, it should be 4 else # so use the IPv4 values local local_address="127.0.0.1" local remote_address="8.8.8.8" local sed_selector="inet" local record_type="A" fi # Find a random blocked url that has not been whitelisted and is not ABP style. # This helps emulate queries to different domains that a user might query # It will also give extra assurance that Pi-hole is correctly resolving and blocking domains local random_url random_url=$(pihole-FTL sqlite3 "${PIHOLE_GRAVITY_DB_FILE}" "SELECT domain FROM vw_gravity WHERE domain not like '||%^' ORDER BY RANDOM() LIMIT 1") # Fallback if no non-ABP style domains were found if [ -z "${random_url}" ]; then random_url="flurry.com" fi # Next we need to check if Pi-hole can resolve a domain when the query is sent to it's IP address # This better emulates how clients will interact with Pi-hole as opposed to above where Pi-hole is # just asing itself locally # The default timeouts and tries are reduced in case the DNS server isn't working, so the user isn't # waiting for too long # # Turn off history expansion such that the "!" in the sed command cannot do silly things set +H # Get interfaces # sed logic breakdown: # / master /d; # Removes all interfaces that are slaves of others (e.g. virtual docker interfaces) # /UP/!d; # Removes all interfaces which are not UP # s/^[0-9]*: //g; # Removes interface index # s/@.*//g; # Removes everything after @ (if found) # s/: <.*//g; # Removes everything after the interface name interfaces="$(ip link show | sed "/ master /d;/UP/!d;s/^[0-9]*: //g;s/@.*//g;s/: <.*//g;")" while IFS= read -r iface ; do # Get addresses of current interface # sed logic breakdown: # /inet(|6) /!d; # Removes all lines from ip a that do not contain either "inet " or "inet6 " # s/^.*inet(|6) //g; # Removes all leading whitespace as well as the "inet " or "inet6 " string # s/\/.*$//g; # Removes CIDR and everything thereafter (e.g., scope properties) addresses="$(ip address show dev "${iface}" | sed "/${sed_selector} /!d;s/^.*${sed_selector} //g;s/\/.*$//g;")" if [ -n "${addresses}" ]; then while IFS= read -r local_address ; do # Check if Pi-hole can use itself to block a domain if local_dig=$(dig +tries=1 +time=2 -"${protocol}" "${random_url}" @"${local_address}" +short "${record_type}"); then # If it can, show success log_write "${TICK} ${random_url} ${COL_GREEN}is ${local_dig}${COL_NC} on ${COL_CYAN}${iface}${COL_NC} (${COL_CYAN}${local_address}${COL_NC})" else # Otherwise, show a failure log_write "${CROSS} ${COL_RED}Failed to resolve${COL_NC} ${random_url} on ${COL_RED}${iface}${COL_NC} (${COL_RED}${local_address}${COL_NC})" fi done <<< "${addresses}" else log_write "${TICK} No IPv${protocol} address available on ${COL_CYAN}${iface}${COL_NC}" fi done <<< "${interfaces}" # Finally, we need to make sure legitimate queries can out to the Internet using an external, public DNS server # We are using the static remote_url here instead of a random one because we know it works with IPv4 and IPv6 if remote_dig=$(dig +tries=1 +time=2 -"${protocol}" "${remote_url}" @"${remote_address}" +short "${record_type}" | head -n1); then # If successful, the real IP of the domain will be returned instead of Pi-hole's IP log_write "${TICK} ${remote_url} ${COL_GREEN}is ${remote_dig}${COL_NC} via ${COL_CYAN}a remote, public DNS server${COL_NC} (${remote_address})" else # Otherwise, show an error log_write "${CROSS} ${COL_RED}Failed to resolve${COL_NC} ${remote_url} via ${COL_RED}a remote, public DNS server${COL_NC} (${remote_address})" fi } process_status(){ # Check to make sure Pi-hole's services are running and active echo_current_diagnostic "Pi-hole processes" # Local iterator local i # For each process, for i in "${PIHOLE_PROCESSES[@]}"; do # If systemd if command -v systemctl &> /dev/null; then # get its status via systemctl local status_of_process status_of_process=$(systemctl is-active "${i}") else # Otherwise, use the service command and mock the output of `systemctl is-active` local status_of_process # If DOCKER_VERSION is set, the output is slightly different (s6 init system on Docker) if [ -n "${DOCKER_VERSION}" ]; then if service "${i}" status | grep -E '^up' &> /dev/null; then status_of_process="active" else status_of_process="inactive" fi else # non-Docker system if service "${i}" status | grep -E 'is\srunning' &> /dev/null; then status_of_process="active" else status_of_process="inactive" fi fi fi # and print it out to the user if [[ "${status_of_process}" == "active" ]]; then # If it's active, show it in green log_write "${TICK} ${COL_GREEN}${i}${COL_NC} daemon is ${COL_GREEN}${status_of_process}${COL_NC}" else # If it's not, show it in red log_write "${CROSS} ${COL_RED}${i}${COL_NC} daemon is ${COL_RED}${status_of_process}${COL_NC}" fi done } ftl_full_status(){ # if using systemd print the full status of pihole-FTL echo_current_diagnostic "Pi-hole-FTL full status" local FTL_status if command -v systemctl &> /dev/null; then FTL_status=$(systemctl status --full --no-pager pihole-FTL.service) log_write " ${FTL_status}" else log_write "${INFO} systemctl: command not found" fi } lighttpd_test_configuration(){ # let lighttpd test it's own configuration local lighttpd_conf_test echo_current_diagnostic "Lighttpd configuration test" lighttpd_conf_test=$(lighttpd -tt -f /etc/lighttpd/lighttpd.conf) if [ -z "${lighttpd_conf_test}" ]; then # empty output log_write "${TICK} ${COL_GREEN}No error in lighttpd configuration${COL_NC}" else log_write "${CROSS} ${COL_RED}Error in lighttpd configuration${COL_NC}" log_write " ${lighttpd_conf_test}" fi } make_array_from_file() { local filename="${1}" # The second argument can put a limit on how many line should be read from the file # Since some of the files are so large, this is helpful to limit the output local limit=${2} # A local iterator for testing if we are at the limit above local i=0 # Set the array to be empty so we can start fresh when the function is used local file_content=() # If the file is a directory if [[ -d "${filename}" ]]; then # do nothing since it cannot be parsed : else # Otherwise, read the file line by line while IFS= read -r line;do # Otherwise, strip out comments and blank lines new_line=$(echo "${line}" | sed -e 's/^\s*#.*$//' -e '/^$/d') # If the line still has content (a non-zero value) if [[ -n "${new_line}" ]]; then # Put it into the array file_content+=("${new_line}") else # Otherwise, it's a blank line or comment, so do nothing : fi # Increment the iterator +1 i=$((i+1)) # but if the limit of lines we want to see is exceeded if [[ -z ${limit} ]]; then # do nothing : elif [[ $i -eq ${limit} ]]; then break fi done < "${filename}" # Now the we have made an array of the file's content for each_line in "${file_content[@]}"; do # Print each line # At some point, we may want to check the file line-by-line, so that's the reason for an array log_write " ${each_line}" done fi } parse_file() { # Set the first argument passed to this function as a named variable for better readability local filename="${1}" # Put the current Internal Field Separator into another variable so it can be restored later OLD_IFS="$IFS" # Get the lines that are in the file(s) and store them in an array for parsing later local file_info if [[ -f "$filename" ]]; then #shellcheck disable=SC2016 IFS=$'\r\n' command eval 'file_info=( $(cat "${filename}") )' else read -r -a file_info <<< "$filename" fi # Set a named variable for better readability local file_lines # For each line in the file, for file_lines in "${file_info[@]}"; do if [[ -n "${file_lines}" ]]; then # don't include the Web password hash [[ "${file_lines}" =~ ^\#.*$ || ! "${file_lines}" || "${file_lines}" == "WEBPASSWORD="* ]] && continue # otherwise, display the lines of the file log_write " ${file_lines}" fi done # Set the IFS back to what it was IFS="$OLD_IFS" } check_name_resolution() { # Check name resolution from localhost, Pi-hole's IP, and Google's name servers # using the function we created earlier dig_at 4 dig_at 6 } # This function can check a directory exists # Pi-hole has files in several places, so we will reuse this function dir_check() { # Set the first argument passed to this function as a named variable for better readability local directory="${1}" # Display the current test that is running echo_current_diagnostic "contents of ${COL_CYAN}${directory}${COL_NC}" # For each file in the directory, for filename in ${directory}; do # check if exists first; if it does, if ls "${filename}" 1> /dev/null 2>&1; then # do nothing true return else # Otherwise, show an error log_write "${COL_RED}${directory} does not exist.${COL_NC}" false return fi done } list_files_in_dir() { # Set the first argument passed to this function as a named variable for better readability local dir_to_parse="${1}" # show files and sizes of some directories, don't print the file content (yet) if [[ "${dir_to_parse}" == "${SHM_DIRECTORY}" ]]; then # SHM file - we do not want to see the content, but we want to see the files and their sizes log_write "$(ls -lh "${dir_to_parse}/")" elif [[ "${dir_to_parse}" == "${WEB_SERVER_CONFIG_DIRECTORY_FEDORA}" ]]; then # we want to see all files files in /etc/lighttpd/conf.d log_write "$(ls -lh "${dir_to_parse}/" 2> /dev/null )" elif [[ "${dir_to_parse}" == "${WEB_SERVER_CONFIG_DIRECTORY_DEBIAN}" ]]; then # we want to see all files files in /etc/lighttpd/conf.d log_write "$(ls -lh "${dir_to_parse}/"/ 2> /dev/null )" fi # Store the files found in an array mapfile -t files_found < <(ls "${dir_to_parse}") # For each file in the array, for each_file in "${files_found[@]}"; do if [[ -d "${dir_to_parse}/${each_file}" ]]; then # If it's a directory, do nothing : elif [[ "${dir_to_parse}/${each_file}" == "${PIHOLE_DEBUG_LOG}" ]] || \ [[ "${dir_to_parse}/${each_file}" == "${PIHOLE_RAW_BLOCKLIST_FILES}" ]] || \ [[ "${dir_to_parse}/${each_file}" == "${PIHOLE_INSTALL_LOG_FILE}" ]] || \ [[ "${dir_to_parse}/${each_file}" == "${PIHOLE_SETUP_VARS_FILE}" ]] || \ [[ "${dir_to_parse}/${each_file}" == "${PIHOLE_LOG}" ]] || \ [[ "${dir_to_parse}/${each_file}" == "${PIHOLE_WEB_SERVER_ACCESS_LOG_FILE}" ]] || \ [[ "${dir_to_parse}/${each_file}" == "${PIHOLE_LOG_GZIPS}" ]]; then : elif [[ "${dir_to_parse}" == "${DNSMASQ_D_DIRECTORY}" ]]; then # in case of the dnsmasq directory include all files in the debug output log_write "\\n${COL_GREEN}$(ls -lhd "${dir_to_parse}"/"${each_file}")${COL_NC}" make_array_from_file "${dir_to_parse}/${each_file}" else # Then, parse the file's content into an array so each line can be analyzed if need be for i in "${!REQUIRED_FILES[@]}"; do if [[ "${dir_to_parse}/${each_file}" == "${REQUIRED_FILES[$i]}" ]]; then # display the filename log_write "\\n${COL_GREEN}$(ls -lhd "${dir_to_parse}"/"${each_file}")${COL_NC}" # Check if the file we want to view has a limit (because sometimes we just need a little bit of info from the file, not the entire thing) case "${dir_to_parse}/${each_file}" in # If it's Web server error log, give the first and last 25 lines "${PIHOLE_WEB_SERVER_ERROR_LOG_FILE}") head_tail_log "${dir_to_parse}/${each_file}" 25 ;; # Same for the FTL log "${PIHOLE_FTL_LOG}") head_tail_log "${dir_to_parse}/${each_file}" 35 ;; # parse the file into an array in case we ever need to analyze it line-by-line *) make_array_from_file "${dir_to_parse}/${each_file}"; esac else # Otherwise, do nothing since it's not a file needed for Pi-hole so we don't care about it : fi done fi done } show_content_of_files_in_dir() { # Set a local variable for better readability local directory="${1}" # Check if the directory exists if dir_check "${directory}"; then # if it does, list the files in it list_files_in_dir "${directory}" fi } show_content_of_pihole_files() { # Show the content of the files in each of Pi-hole's folders show_content_of_files_in_dir "${PIHOLE_DIRECTORY}" show_content_of_files_in_dir "${DNSMASQ_D_DIRECTORY}" show_content_of_files_in_dir "${WEB_SERVER_CONFIG_DIRECTORY}" show_content_of_files_in_dir "${WEB_SERVER_CONFIG_DIRECTORY_FEDORA}" show_content_of_files_in_dir "${WEB_SERVER_CONFIG_DIRECTORY_DEBIAN}" show_content_of_files_in_dir "${CRON_D_DIRECTORY}" show_content_of_files_in_dir "${WEB_SERVER_LOG_DIRECTORY}" show_content_of_files_in_dir "${LOG_DIRECTORY}" show_content_of_files_in_dir "${SHM_DIRECTORY}" show_content_of_files_in_dir "${ETC}" } head_tail_log() { # The file being processed local filename="${1}" # The number of lines to use for head and tail local qty="${2}" local head_line local tail_line # Put the current Internal Field Separator into another variable so it can be restored later OLD_IFS="$IFS" # Get the lines that are in the file(s) and store them in an array for parsing later IFS=$'\r\n' local log_head=() mapfile -t log_head < <(head -n "${qty}" "${filename}") log_write " ${COL_CYAN}-----head of $(basename "${filename}")------${COL_NC}" for head_line in "${log_head[@]}"; do log_write " ${head_line}" done log_write "" local log_tail=() mapfile -t log_tail < <(tail -n "${qty}" "${filename}") log_write " ${COL_CYAN}-----tail of $(basename "${filename}")------${COL_NC}" for tail_line in "${log_tail[@]}"; do log_write " ${tail_line}" done # Set the IFS back to what it was IFS="$OLD_IFS" } show_db_entries() { local title="${1}" local query="${2}" local widths="${3}" echo_current_diagnostic "${title}" OLD_IFS="$IFS" IFS=$'\r\n' local entries=() mapfile -t entries < <(\ pihole-FTL sqlite3 "${PIHOLE_GRAVITY_DB_FILE}" \ -cmd ".headers on" \ -cmd ".mode column" \ -cmd ".width ${widths}" \ "${query}"\ ) for line in "${entries[@]}"; do log_write " ${line}" done IFS="$OLD_IFS" } show_FTL_db_entries() { local title="${1}" local query="${2}" local widths="${3}" echo_current_diagnostic "${title}" OLD_IFS="$IFS" IFS=$'\r\n' local entries=() mapfile -t entries < <(\ pihole-FTL sqlite3 "${PIHOLE_FTL_DB_FILE}" \ -cmd ".headers on" \ -cmd ".mode column" \ -cmd ".width ${widths}" \ "${query}"\ ) for line in "${entries[@]}"; do log_write " ${line}" done IFS="$OLD_IFS" } check_dhcp_servers() { echo_current_diagnostic "Discovering active DHCP servers (takes 10 seconds)" OLD_IFS="$IFS" IFS=$'\n' local entries=() mapfile -t entries < <(pihole-FTL dhcp-discover & spinner) for line in "${entries[@]}"; do log_write " ${line}" done IFS="$OLD_IFS" } show_groups() { show_db_entries "Groups" "SELECT id,CASE enabled WHEN '0' THEN ' 0' WHEN '1' THEN ' 1' ELSE enabled END enabled,name,datetime(date_added,'unixepoch','localtime') date_added,datetime(date_modified,'unixepoch','localtime') date_modified,description FROM \"group\"" "4 7 50 19 19 50" } show_adlists() { show_db_entries "Adlists" "SELECT id,CASE enabled WHEN '0' THEN ' 0' WHEN '1' THEN ' 1' ELSE enabled END enabled,GROUP_CONCAT(adlist_by_group.group_id) group_ids,address,datetime(date_added,'unixepoch','localtime') date_added,datetime(date_modified,'unixepoch','localtime') date_modified,comment FROM adlist LEFT JOIN adlist_by_group ON adlist.id = adlist_by_group.adlist_id GROUP BY id;" "5 7 12 100 19 19 50" } show_domainlist() { show_db_entries "Domainlist (0/1 = exact white-/blacklist, 2/3 = regex white-/blacklist)" "SELECT id,CASE type WHEN '0' THEN '0 ' WHEN '1' THEN ' 1 ' WHEN '2' THEN ' 2 ' WHEN '3' THEN ' 3' ELSE type END type,CASE enabled WHEN '0' THEN ' 0' WHEN '1' THEN ' 1' ELSE enabled END enabled,GROUP_CONCAT(domainlist_by_group.group_id) group_ids,domain,datetime(date_added,'unixepoch','localtime') date_added,datetime(date_modified,'unixepoch','localtime') date_modified,comment FROM domainlist LEFT JOIN domainlist_by_group ON domainlist.id = domainlist_by_group.domainlist_id GROUP BY id;" "5 4 7 12 100 19 19 50" } show_clients() { show_db_entries "Clients" "SELECT id,GROUP_CONCAT(client_by_group.group_id) group_ids,ip,datetime(date_added,'unixepoch','localtime') date_added,datetime(date_modified,'unixepoch','localtime') date_modified,comment FROM client LEFT JOIN client_by_group ON client.id = client_by_group.client_id GROUP BY id;" "4 12 100 19 19 50" } show_messages() { show_FTL_db_entries "Pi-hole diagnosis messages" "SELECT count (message) as count, datetime(max(timestamp),'unixepoch','localtime') as 'last timestamp', type, message, blob1, blob2, blob3, blob4, blob5 FROM message GROUP BY type, message, blob1, blob2, blob3, blob4, blob5;" "6 19 20 60 20 20 20 20 20" } database_permissions() { local permissions permissions=$(ls -lhd "${1}") log_write "${COL_GREEN}${permissions}${COL_NC}" } analyze_gravity_list() { echo_current_diagnostic "Gravity Database" database_permissions "${PIHOLE_GRAVITY_DB_FILE}" # if users want to check database integrity if [[ "${CHECK_DATABASE}" = true ]]; then database_integrity_check "${PIHOLE_GRAVITY_DB_FILE}" fi show_db_entries "Info table" "SELECT property,value FROM info" "20 40" gravity_updated_raw="$(pihole-FTL sqlite3 "${PIHOLE_GRAVITY_DB_FILE}" "SELECT value FROM info where property = 'updated'")" gravity_updated="$(date -d @"${gravity_updated_raw}")" log_write " Last gravity run finished at: ${COL_CYAN}${gravity_updated}${COL_NC}" log_write "" OLD_IFS="$IFS" IFS=$'\r\n' local gravity_sample=() mapfile -t gravity_sample < <(pihole-FTL sqlite3 "${PIHOLE_GRAVITY_DB_FILE}" "SELECT domain FROM vw_gravity LIMIT 10") log_write " ${COL_CYAN}----- First 10 Gravity Domains -----${COL_NC}" for line in "${gravity_sample[@]}"; do log_write " ${line}" done log_write "" IFS="$OLD_IFS" } analyze_ftl_db() { echo_current_diagnostic "Pi-hole FTL Query Database" database_permissions "${PIHOLE_FTL_DB_FILE}" # if users want to check database integrity if [[ "${CHECK_DATABASE}" = true ]]; then database_integrity_check "${PIHOLE_FTL_DB_FILE}" fi } database_integrity_check(){ local result local database="${1}" log_write "${INFO} Checking integrity of ${database} ... (this can take several minutes)" result="$(pihole-FTL "${database}" "PRAGMA integrity_check" 2>&1 & spinner)" if [[ ${result} = "ok" ]]; then log_write "${TICK} Integrity of ${database} intact" log_write "${INFO} Checking foreign key constraints of ${database} ... (this can take several minutes)" unset result result="$(pihole-FTL sqlite3 "${database}" -cmd ".headers on" -cmd ".mode column" "PRAGMA foreign_key_check" 2>&1 & spinner)" if [[ -z ${result} ]]; then log_write "${TICK} No foreign key errors in ${database}" else log_write "${CROSS} ${COL_RED}Foreign key errors in ${database} found.${COL_NC}" while IFS= read -r line ; do log_write " $line" done <<< "$result" fi else log_write "${CROSS} ${COL_RED}Integrity errors in ${database} found.\n${COL_NC}" while IFS= read -r line ; do log_write " $line" done <<< "$result" fi } # Show a text spinner during a long process run spinner(){ # Show the spinner only if there is a tty if tty -s; then # PID of the most recent background process _PID=$! _spin="/-\|" _start=0 _elapsed=0 _i=1 # Start the counter _start=$(date +%s) # Hide the cursor tput civis > /dev/tty # ensures cursor is visible again, in case of premature exit trap 'tput cnorm > /dev/tty' EXIT while [ -d /proc/$_PID ]; do _elapsed=$(( $(date +%s) - _start )) # use hours only if needed if [ "$_elapsed" -lt 3600 ]; then printf "\r${_spin:_i++%${#_spin}:1} %02d:%02d" $((_elapsed/60)) $((_elapsed%60)) >"$(tty)" else printf "\r${_spin:_i++%${#_spin}:1} %02d:%02d:%02d" $((_elapsed/3600)) $(((_elapsed/60)%60)) $((_elapsed%60)) >"$(tty)" fi sleep 0.25 done # Return to the begin of the line after completion (the spinner will be overwritten) printf "\r" >"$(tty)" # Restore cursor visibility tput cnorm > /dev/tty fi } analyze_pihole_log() { echo_current_diagnostic "Pi-hole log" local pihole_log_permissions local logging_enabled logging_enabled=$(grep -c "^log-queries" /etc/dnsmasq.d/01-pihole.conf) if [[ "${logging_enabled}" == "0" ]]; then # Inform user that logging has been disabled and pihole.log does not contain queries log_write "${INFO} Query logging is disabled" log_write "" fi pihole_log_permissions=$(ls -lhd "${PIHOLE_LOG}") log_write "${COL_GREEN}${pihole_log_permissions}${COL_NC}" head_tail_log "${PIHOLE_LOG}" 20 } curl_to_tricorder() { # Users can submit their debug logs using curl (encrypted) log_write " * Using ${COL_GREEN}curl${COL_NC} for transmission." # transmit the log via TLS and store the token returned in a variable tricorder_token=$(curl --silent --fail --show-error --upload-file ${PIHOLE_DEBUG_LOG} https://tricorder.pi-hole.net 2>&1) if [[ "${tricorder_token}" != "https://tricorder.pi-hole.net/"* ]]; then log_write " * ${COL_GREEN}curl${COL_NC} failed, contact Pi-hole support for assistance." # Log curl error (if available) if [ -n "${tricorder_token}" ]; then log_write " * Error message: ${COL_RED}${tricorder_token}${COL_NC}\\n" tricorder_token="" fi fi } upload_to_tricorder() { local username="pihole" # Set the permissions and owner chmod 640 ${PIHOLE_DEBUG_LOG} chown "$USER":"${username}" ${PIHOLE_DEBUG_LOG} # Let the user know debugging is complete with something strikingly visual log_write "" log_write "${COL_PURPLE}********************************************${COL_NC}" log_write "${COL_PURPLE}********************************************${COL_NC}" log_write "${TICK} ${COL_GREEN}** FINISHED DEBUGGING! **${COL_NC}\\n" # Provide information on what they should do with their token log_write " * The debug log can be uploaded to tricorder.pi-hole.net for sharing with developers only." # If pihole -d is running automatically if [[ "${AUTOMATED}" ]]; then # let the user know log_write "${INFO} Debug script running in automated mode" # and then decide again which tool to use to submit it curl_to_tricorder # If we're not running in automated mode, else # if not being called from the web interface if [[ ! "${WEBCALL}" ]]; then echo "" # give the user a choice of uploading it or not # Users can review the log file locally (or the output of the script since they are the same) and try to self-diagnose their problem read -r -p "[?] Would you like to upload the log? [y/N] " response case ${response} in # If they say yes, run our function for uploading the log [yY][eE][sS]|[yY]) curl_to_tricorder;; # If they choose no, just exit out of the script *) log_write " * Log will ${COL_GREEN}NOT${COL_NC} be uploaded to tricorder.\\n * A local copy of the debug log can be found at: ${COL_CYAN}${PIHOLE_DEBUG_LOG}${COL_NC}\\n";exit; esac fi fi # Check if tricorder.pi-hole.net is reachable and provide token # along with some additional useful information if [[ -n "${tricorder_token}" ]]; then # Again, try to make this visually striking so the user realizes they need to do something with this information # Namely, provide the Pi-hole devs with the token log_write "" log_write "${COL_PURPLE}*****************************************************************${COL_NC}" log_write "${COL_PURPLE}*****************************************************************${COL_NC}\\n" log_write "${TICK} Your debug token is: ${COL_GREEN}${tricorder_token}${COL_NC}" log_write "${INFO}${COL_RED} Logs are deleted 48 hours after upload.${COL_NC}\\n" log_write "${COL_PURPLE}*****************************************************************${COL_NC}" log_write "${COL_PURPLE}*****************************************************************${COL_NC}" log_write "" log_write " * Provide the token above to the Pi-hole team for assistance at ${FORUMS_URL}" # If no token was generated else # Show an error and some help instructions # Skip this if being called from web interface and automatic mode was not chosen (users opt-out to upload) if [[ "${WEBCALL}" ]] && [[ ! "${AUTOMATED}" ]]; then : else log_write "${CROSS} ${COL_RED}There was an error uploading your debug log.${COL_NC}" log_write " * Please try again or contact the Pi-hole team for assistance." fi fi # Finally, show where the log file is no matter the outcome of the function so users can look at it log_write " * A local copy of the debug log can be found at: ${COL_CYAN}${PIHOLE_DEBUG_LOG}${COL_NC}\\n" } # Run through all the functions we made make_temporary_log initialize_debug # setupVars.conf needs to be sourced before the networking so the values are # available to the other functions source_setup_variables check_component_versions check_critical_program_versions diagnose_operating_system check_selinux check_firewalld processor_check disk_usage check_ip_command check_networking check_name_resolution check_dhcp_servers process_status ftl_full_status lighttpd_test_configuration parse_setup_vars check_x_headers analyze_ftl_db analyze_gravity_list show_groups show_domainlist show_clients show_adlists show_content_of_pihole_files show_messages parse_locale analyze_pihole_log copy_to_debug_log upload_to_tricorder