#!/usr/bin/env bash # shellcheck disable=SC1090 # Pi-hole: A black hole for Internet advertisements # (c) 2017 Pi-hole, LLC (https://pi-hole.net) # Network-wide ad blocking via your own hardware. # # Usage: "pihole -g" # Compiles a list of ad-serving domains by downloading them from multiple sources # # This file is copyright under the latest version of the EUPL. # Please see LICENSE file for your rights under this license. export LC_ALL=C coltable="/opt/pihole/COL_TABLE" source "${coltable}" regexconverter="/opt/pihole/wildcard_regex_converter.sh" source "${regexconverter}" # shellcheck disable=SC1091 source "/etc/.pihole/advanced/Scripts/database_migration/gravity-db.sh" basename="pihole" PIHOLE_COMMAND="/usr/local/bin/${basename}" piholeDir="/etc/${basename}" # Legacy (pre v5.0) list file locations whitelistFile="${piholeDir}/whitelist.txt" blacklistFile="${piholeDir}/blacklist.txt" regexFile="${piholeDir}/regex.list" adListFile="${piholeDir}/adlists.list" localList="${piholeDir}/local.list" VPNList="/etc/openvpn/ipp.txt" piholeGitDir="/etc/.pihole" gravityDBfile="${piholeDir}/gravity.db" gravityTEMPfile="${piholeDir}/gravity_temp.db" gravityDBschema="${piholeGitDir}/advanced/Templates/gravity.db.sql" gravityDBcopy="${piholeGitDir}/advanced/Templates/gravity_copy.sql" domainsExtension="domains" # Source setupVars from install script setupVars="${piholeDir}/setupVars.conf" if [[ -f "${setupVars}" ]];then source "${setupVars}" # Remove CIDR mask from IPv4/6 addresses IPV4_ADDRESS="${IPV4_ADDRESS%/*}" IPV6_ADDRESS="${IPV6_ADDRESS%/*}" # Determine if IPv4/6 addresses exist if [[ -z "${IPV4_ADDRESS}" ]] && [[ -z "${IPV6_ADDRESS}" ]]; then echo -e " ${COL_LIGHT_RED}No IP addresses found! Please run 'pihole -r' to reconfigure${COL_NC}" exit 1 fi else echo -e " ${COL_LIGHT_RED}Installation Failure: ${setupVars} does not exist! ${COL_NC} Please run 'pihole -r', and choose the 'reconfigure' option to fix." exit 1 fi # Source pihole-FTL from install script pihole_FTL="${piholeDir}/pihole-FTL.conf" if [[ -f "${pihole_FTL}" ]]; then source "${pihole_FTL}" fi if [[ -z "${BLOCKINGMODE}" ]] ; then BLOCKINGMODE="NULL" fi # Determine if superseded pihole.conf exists if [[ -r "${piholeDir}/pihole.conf" ]]; then echo -e " ${COL_LIGHT_RED}Ignoring overrides specified within pihole.conf! ${COL_NC}" fi # Generate new sqlite3 file from schema template generate_gravity_database() { sqlite3 "${1}" < "${gravityDBschema}" } # Copy data from old to new database file and swap them gravity_swap_databases() { local str str="Building tree" echo -ne " ${INFO} ${str}..." # The index is intentionally not UNIQUE as prro quality adlists may contain domains more than once output=$( { sqlite3 "${gravityTEMPfile}" "CREATE INDEX idx_gravity ON gravity (domain, adlist_id);"; } 2>&1 ) status="$?" if [[ "${status}" -ne 0 ]]; then echo -e "\\n ${CROSS} Unable to build gravity tree in ${gravityTEMPfile}\\n ${output}" return 1 fi echo -e "${OVER} ${TICK} ${str}" str="Swapping databases" echo -ne " ${INFO} ${str}..." output=$( { sqlite3 "${gravityTEMPfile}" < "${gravityDBcopy}"; } 2>&1 ) status="$?" if [[ "${status}" -ne 0 ]]; then echo -e "\\n ${CROSS} Unable to copy data from ${gravityDBfile} to ${gravityTEMPfile}\\n ${output}" return 1 fi echo -e "${OVER} ${TICK} ${str}" # Swap databases and remove old database rm "${gravityDBfile}" mv "${gravityTEMPfile}" "${gravityDBfile}" } # Update timestamp when the gravity table was last updated successfully update_gravity_timestamp() { output=$( { printf ".timeout 30000\\nINSERT OR REPLACE INTO info (property,value) values ('updated',cast(strftime('%%s', 'now') as int));" | sqlite3 "${gravityDBfile}"; } 2>&1 ) status="$?" if [[ "${status}" -ne 0 ]]; then echo -e "\\n ${CROSS} Unable to update gravity timestamp in database ${gravityDBfile}\\n ${output}" return 1 fi return 0 } # Import domains from file and store them in the specified database table database_table_from_file() { # Define locals local table source backup_path backup_file tmpFile type table="${1}" source="${2}" backup_path="${piholeDir}/migration_backup" backup_file="${backup_path}/$(basename "${2}")" tmpFile="$(mktemp -p "/tmp" --suffix=".gravity")" local timestamp timestamp="$(date --utc +'%s')" local rowid declare -i rowid rowid=1 # Special handling for domains to be imported into the common domainlist table if [[ "${table}" == "whitelist" ]]; then type="0" table="domainlist" elif [[ "${table}" == "blacklist" ]]; then type="1" table="domainlist" elif [[ "${table}" == "regex" ]]; then type="3" table="domainlist" fi # Get MAX(id) from domainlist when INSERTing into this table if [[ "${table}" == "domainlist" ]]; then rowid="$(sqlite3 "${gravityDBfile}" "SELECT MAX(id) FROM domainlist;")" if [[ -z "$rowid" ]]; then rowid=0 fi rowid+=1 fi # Loop over all domains in ${source} file # Read file line by line grep -v '^ *#' < "${source}" | while IFS= read -r domain do # Only add non-empty lines if [[ -n "${domain}" ]]; then if [[ "${table}" == "domain_audit" ]]; then # domain_audit table format (no enable or modified fields) echo "${rowid},\"${domain}\",${timestamp}" >> "${tmpFile}" elif [[ "${table}" == "adlist" ]]; then # Adlist table format echo "${rowid},\"${domain}\",1,${timestamp},${timestamp},\"Migrated from ${source}\"" >> "${tmpFile}" else # White-, black-, and regexlist table format echo "${rowid},${type},\"${domain}\",1,${timestamp},${timestamp},\"Migrated from ${source}\"" >> "${tmpFile}" fi rowid+=1 fi done # Store domains in database table specified by ${table} # Use printf as .mode and .import need to be on separate lines # see https://unix.stackexchange.com/a/445615/83260 output=$( { printf ".timeout 30000\\n.mode csv\\n.import \"%s\" %s\\n" "${tmpFile}" "${table}" | sqlite3 "${gravityDBfile}"; } 2>&1 ) status="$?" if [[ "${status}" -ne 0 ]]; then echo -e "\\n ${CROSS} Unable to fill table ${table}${type} in database ${gravityDBfile}\\n ${output}" gravity_Cleanup "error" fi # Move source file to backup directory, create directory if not existing mkdir -p "${backup_path}" mv "${source}" "${backup_file}" 2> /dev/null || \ echo -e " ${CROSS} Unable to backup ${source} to ${backup_path}" # Delete tmpFile rm "${tmpFile}" > /dev/null 2>&1 || \ echo -e " ${CROSS} Unable to remove ${tmpFile}" } # Update timestamp of last update of this list. We store this in the "old" database as all values in the new database will later be overwritten database_adlist_updated() { output=$( { printf ".timeout 30000\\nUPDATE adlist SET date_updated = (cast(strftime('%%s', 'now') as int)) WHERE id = %i;\\n" "${1}" | sqlite3 "${gravityDBfile}"; } 2>&1 ) status="$?" if [[ "${status}" -ne 0 ]]; then echo -e "\\n ${CROSS} Unable to update timestamp of adlist with ID ${1} in database ${gravityDBfile}\\n ${output}" gravity_Cleanup "error" fi } # Migrate pre-v5.0 list files to database-based Pi-hole versions migrate_to_database() { # Create database file only if not present if [ ! -e "${gravityDBfile}" ]; then # Create new database file - note that this will be created in version 1 echo -e " ${INFO} Creating new gravity database" generate_gravity_database "${gravityDBfile}" # Check if gravity database needs to be updated upgrade_gravityDB "${gravityDBfile}" "${piholeDir}" # Migrate list files to new database if [ -e "${adListFile}" ]; then # Store adlist domains in database echo -e " ${INFO} Migrating content of ${adListFile} into new database" database_table_from_file "adlist" "${adListFile}" fi if [ -e "${blacklistFile}" ]; then # Store blacklisted domains in database echo -e " ${INFO} Migrating content of ${blacklistFile} into new database" database_table_from_file "blacklist" "${blacklistFile}" fi if [ -e "${whitelistFile}" ]; then # Store whitelisted domains in database echo -e " ${INFO} Migrating content of ${whitelistFile} into new database" database_table_from_file "whitelist" "${whitelistFile}" fi if [ -e "${regexFile}" ]; then # Store regex domains in database # Important note: We need to add the domains to the "regex" table # as it will only later be renamed to "regex_blacklist"! echo -e " ${INFO} Migrating content of ${regexFile} into new database" database_table_from_file "regex" "${regexFile}" fi fi # Check if gravity database needs to be updated upgrade_gravityDB "${gravityDBfile}" "${piholeDir}" } # Determine if DNS resolution is available before proceeding gravity_CheckDNSResolutionAvailable() { local lookupDomain="pi.hole" # Determine if $localList does not exist, and ensure it is not empty if [[ ! -e "${localList}" ]] || [[ -s "${localList}" ]]; then lookupDomain="raw.githubusercontent.com" fi # Determine if $lookupDomain is resolvable if timeout 4 getent hosts "${lookupDomain}" &> /dev/null; then # Print confirmation of resolvability if it had previously failed if [[ -n "${secs:-}" ]]; then echo -e "${OVER} ${TICK} DNS resolution is now available\\n" fi return 0 elif [[ -n "${secs:-}" ]]; then echo -e "${OVER} ${CROSS} DNS resolution is not available" exit 1 fi # If the /etc/resolv.conf contains resolvers other than 127.0.0.1 then the local dnsmasq will not be queried and pi.hole is NXDOMAIN. # This means that even though name resolution is working, the getent hosts check fails and the holddown timer keeps ticking and eventually fails # So we check the output of the last command and if it failed, attempt to use dig +short as a fallback if timeout 4 dig +short "${lookupDomain}" &> /dev/null; then if [[ -n "${secs:-}" ]]; then echo -e "${OVER} ${TICK} DNS resolution is now available\\n" fi return 0 elif [[ -n "${secs:-}" ]]; then echo -e "${OVER} ${CROSS} DNS resolution is not available" exit 1 fi # Determine error output message if pgrep pihole-FTL &> /dev/null; then echo -e " ${CROSS} DNS resolution is currently unavailable" else echo -e " ${CROSS} DNS service is not running" "${PIHOLE_COMMAND}" restartdns fi # Ensure DNS server is given time to be resolvable secs="120" echo -ne " ${INFO} Time until retry: ${secs}" until timeout 1 getent hosts "${lookupDomain}" &> /dev/null; do [[ "${secs:-}" -eq 0 ]] && break echo -ne "${OVER} ${INFO} Time until retry: ${secs}" : $((secs--)) sleep 1 done # Try again gravity_CheckDNSResolutionAvailable } # Retrieve blocklist URLs and parse domains from adlist.list gravity_DownloadBlocklists() { echo -e " ${INFO} ${COL_BOLD}Neutrino emissions detected${COL_NC}..." # Retrieve source URLs from gravity database # We source only enabled adlists, sqlite3 stores boolean values as 0 (false) or 1 (true) mapfile -t sources <<< "$(sqlite3 "${gravityDBfile}" "SELECT address FROM vw_adlist;" 2> /dev/null)" mapfile -t sourceIDs <<< "$(sqlite3 "${gravityDBfile}" "SELECT id FROM vw_adlist;" 2> /dev/null)" # Parse source domains from $sources mapfile -t sourceDomains <<< "$( # Logic: Split by folder/port awk -F '[/:]' '{ # Remove URL protocol & optional username:password@ gsub(/(.*:\/\/|.*:.*@)/, "", $0) if(length($1)>0){print $1} else {print "local"} }' <<< "$(printf '%s\n' "${sources[@]}")" 2> /dev/null )" local str="Pulling blocklist source list into range" if [[ -n "${sources[*]}" ]] && [[ -n "${sourceDomains[*]}" ]]; then echo -e "${OVER} ${TICK} ${str}" else echo -e "${OVER} ${CROSS} ${str}" echo -e " ${INFO} No source list found, or it is empty" echo "" return 1 fi local url domain agent cmd_ext str target compression echo "" # Prepare new gravity database str="Preparing new gravity database" echo -ne " ${INFO} ${str}..." rm "${gravityTEMPfile}" > /dev/null 2>&1 output=$( { sqlite3 "${gravityTEMPfile}" < "${gravityDBschema}"; } 2>&1 ) status="$?" if [[ "${status}" -ne 0 ]]; then echo -e "\\n ${CROSS} Unable to create new database ${gravityTEMPfile}\\n ${output}" gravity_Cleanup "error" else echo -e "${OVER} ${TICK} ${str}" fi target="$(mktemp -p "/tmp" --suffix=".gravity")" # Use compression to reduce the amount of data that is transfered # between the Pi-hole and the ad list provider. Use this feature # only if it is supported by the locally available version of curl if curl -V | grep -q "Features:.* libz"; then compression="--compressed" echo -e " ${INFO} Using libz compression\n" else compression="" echo -e " ${INFO} Libz compression not available\n" fi # Loop through $sources and download each one for ((i = 0; i < "${#sources[@]}"; i++)); do url="${sources[$i]}" domain="${sourceDomains[$i]}" id="${sourceIDs[$i]}" # Save the file as list.#.domain saveLocation="${piholeDir}/list.${id}.${domain}.${domainsExtension}" activeDomains[$i]="${saveLocation}" # Default user-agent (for Cloudflare's Browser Integrity Check: https://support.cloudflare.com/hc/en-us/articles/200170086-What-does-the-Browser-Integrity-Check-do-) agent="Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/70.0.3538.102 Safari/537.36" # Provide special commands for blocklists which may need them case "${domain}" in "pgl.yoyo.org") cmd_ext="-d mimetype=plaintext -d hostformat=hosts";; *) cmd_ext="";; esac echo -e " ${INFO} Target: ${url}" local regex # Check for characters NOT allowed in URLs regex="[^a-zA-Z0-9:/?&%=~._()-;]" if [[ "${url}" =~ ${regex} ]]; then echo -e " ${CROSS} Invalid Target" else gravity_DownloadBlocklistFromUrl "${url}" "${cmd_ext}" "${agent}" "${sourceIDs[$i]}" "${saveLocation}" "${target}" "${compression}" fi echo "" done str="Storing downloaded domains in new gravity database" echo -ne " ${INFO} ${str}..." output=$( { printf ".timeout 30000\\n.mode csv\\n.import \"%s\" gravity\\n" "${target}" | sqlite3 "${gravityTEMPfile}"; } 2>&1 ) status="$?" if [[ "${status}" -ne 0 ]]; then echo -e "\\n ${CROSS} Unable to fill gravity table in database ${gravityTEMPfile}\\n ${output}" gravity_Cleanup "error" else echo -e "${OVER} ${TICK} ${str}" fi if [[ "${status}" -eq 0 && -n "${output}" ]]; then echo -e " Encountered non-critical SQL warnings. Please check the suitability of the lists you're using!\\n\\n SQL warnings:" local warning file line lineno while IFS= read -r line; do echo " - ${line}" warning="$(grep -oh "^[^:]*:[0-9]*" <<< "${line}")" file="${warning%:*}" lineno="${warning#*:}" if [[ -n "${file}" && -n "${lineno}" ]]; then echo -n " Line contains: " awk "NR==${lineno}" < "${file}" fi done <<< "${output}" echo "" fi rm "${target}" > /dev/null 2>&1 || \ echo -e " ${CROSS} Unable to remove ${target}" gravity_Blackbody=true } total_num=0 parseList() { local adlistID="${1}" src="${2}" target="${3}" incorrect_lines # This sed does the following things: # 1. Remove all domains containing invalid characters. Valid are: a-z, A-Z, 0-9, dot (.), minus (-), underscore (_) # 2. Append ,adlistID to every line # 3. Ensures there is a newline on the last line sed -e "/[^a-zA-Z0-9.\_-]/d;s/$/,${adlistID}/;/.$/a\\" "${src}" >> "${target}" # Find (up to) five domains containing invalid characters (see above) incorrect_lines="$(sed -e "/[^a-zA-Z0-9.\_-]/!d" "${src}" | head -n 5)" local num_lines num_target_lines num_correct_lines num_invalid # Get number of lines in source file num_lines="$(grep -c "^" "${src}")" # Get number of lines in destination file num_target_lines="$(grep -c "^" "${target}")" num_correct_lines="$(( num_target_lines-total_num ))" total_num="$num_target_lines" num_invalid="$(( num_lines-num_correct_lines ))" if [[ "${num_invalid}" -eq 0 ]]; then echo " ${INFO} Received ${num_lines} domains" else echo " ${INFO} Received ${num_lines} domains, ${num_invalid} domains invalid!" fi # Display sample of invalid lines if we found some if [[ -n "${incorrect_lines}" ]]; then echo " Sample of invalid domains:" while IFS= read -r line; do echo " - ${line}" done <<< "${incorrect_lines}" fi } # Download specified URL and perform checks on HTTP status and file content gravity_DownloadBlocklistFromUrl() { local url="${1}" cmd_ext="${2}" agent="${3}" adlistID="${4}" saveLocation="${5}" target="${6}" compression="${7}" local heisenbergCompensator="" patternBuffer str httpCode success="" # Create temp file to store content on disk instead of RAM patternBuffer=$(mktemp -p "/tmp" --suffix=".phgpb") # Determine if $saveLocation has read permission if [[ -r "${saveLocation}" && $url != "file"* ]]; then # Have curl determine if a remote file has been modified since last retrieval # Uses "Last-Modified" header, which certain web servers do not provide (e.g: raw github urls) # Note: Don't do this for local files, always download them heisenbergCompensator="-z ${saveLocation}" fi str="Status:" echo -ne " ${INFO} ${str} Pending..." blocked=false case $BLOCKINGMODE in "IP-NODATA-AAAA"|"IP") if [[ $(dig "${domain}" +short | grep "${IPV4_ADDRESS}" -c) -ge 1 ]]; then blocked=true fi;; "NXDOMAIN") if [[ $(dig "${domain}" | grep "NXDOMAIN" -c) -ge 1 ]]; then blocked=true fi;; "NULL"|*) if [[ $(dig "${domain}" +short | grep "0.0.0.0" -c) -ge 1 ]]; then blocked=true fi;; esac if [[ "${blocked}" == true ]]; then printf -v ip_addr "%s" "${PIHOLE_DNS_1%#*}" if [[ ${PIHOLE_DNS_1} != *"#"* ]]; then port=53 else printf -v port "%s" "${PIHOLE_DNS_1#*#}" fi ip=$(dig "@${ip_addr}" -p "${port}" +short "${domain}" | tail -1) if [[ $(echo "${url}" | awk -F '://' '{print $1}') = "https" ]]; then port=443; else port=80 fi bad_list=$(pihole -q -adlist "${domain}" | head -n1 | awk -F 'Match found in ' '{print $2}') echo -e "${OVER} ${CROSS} ${str} ${domain} is blocked by ${bad_list%:}. Using DNS on ${PIHOLE_DNS_1} to download ${url}"; echo -ne " ${INFO} ${str} Pending..." cmd_ext="--resolve $domain:$port:$ip $cmd_ext" fi # shellcheck disable=SC2086 httpCode=$(curl -s -L ${compression} ${cmd_ext} ${heisenbergCompensator} -w "%{http_code}" -A "${agent}" "${url}" -o "${patternBuffer}" 2> /dev/null) case $url in # Did we "download" a local file? "file"*) if [[ -s "${patternBuffer}" ]]; then echo -e "${OVER} ${TICK} ${str} Retrieval successful"; success=true else echo -e "${OVER} ${CROSS} ${str} Not found / empty list" fi;; # Did we "download" a remote file? *) # Determine "Status:" output based on HTTP response case "${httpCode}" in "200") echo -e "${OVER} ${TICK} ${str} Retrieval successful"; success=true;; "304") echo -e "${OVER} ${TICK} ${str} No changes detected"; success=true;; "000") echo -e "${OVER} ${CROSS} ${str} Connection Refused";; "403") echo -e "${OVER} ${CROSS} ${str} Forbidden";; "404") echo -e "${OVER} ${CROSS} ${str} Not found";; "408") echo -e "${OVER} ${CROSS} ${str} Time-out";; "451") echo -e "${OVER} ${CROSS} ${str} Unavailable For Legal Reasons";; "500") echo -e "${OVER} ${CROSS} ${str} Internal Server Error";; "504") echo -e "${OVER} ${CROSS} ${str} Connection Timed Out (Gateway)";; "521") echo -e "${OVER} ${CROSS} ${str} Web Server Is Down (Cloudflare)";; "522") echo -e "${OVER} ${CROSS} ${str} Connection Timed Out (Cloudflare)";; * ) echo -e "${OVER} ${CROSS} ${str} ${url} (${httpCode})";; esac;; esac # Determine if the blocklist was downloaded and saved correctly if [[ "${success}" == true ]]; then if [[ "${httpCode}" == "304" ]]; then # Add domains to database table file parseList "${adlistID}" "${saveLocation}" "${target}" # Check if $patternbuffer is a non-zero length file elif [[ -s "${patternBuffer}" ]]; then # Determine if blocklist is non-standard and parse as appropriate gravity_ParseFileIntoDomains "${patternBuffer}" "${saveLocation}" # Add domains to database table file parseList "${adlistID}" "${saveLocation}" "${target}" # Update date_updated field in gravity database table database_adlist_updated "${adlistID}" else # Fall back to previously cached list if $patternBuffer is empty echo -e " ${INFO} Received empty file: ${COL_LIGHT_GREEN}using previously cached list${COL_NC}" fi else # Determine if cached list has read permission if [[ -r "${saveLocation}" ]]; then echo -e " ${CROSS} List download failed: ${COL_LIGHT_GREEN}using previously cached list${COL_NC}" # Add domains to database table file parseList "${adlistID}" "${saveLocation}" "${target}" else echo -e " ${CROSS} List download failed: ${COL_LIGHT_RED}no cached list available${COL_NC}" fi fi } # Parse source files into domains format gravity_ParseFileIntoDomains() { local source="${1}" destination="${2}" firstLine # Determine if we are parsing a consolidated list #if [[ "${source}" == "${piholeDir}/${matterAndLight}" ]]; then # Remove comments and print only the domain name # Most of the lists downloaded are already in hosts file format but the spacing/formating is not contiguous # This helps with that and makes it easier to read # It also helps with debugging so each stage of the script can be researched more in depth # 1) Remove carriage returns # 2) Convert all characters to lowercase # 3) Remove comments (text starting with "#", include possible spaces before the hash sign) # 4) Remove lines containing "/" # 5) Remove leading tabs, spaces, etc. # 6) Delete lines not matching domain names < "${source}" tr -d '\r' | \ tr '[:upper:]' '[:lower:]' | \ sed 's/\s*#.*//g' | \ sed -r '/(\/).*$/d' | \ sed -r 's/^.*\s+//g' | \ sed -r '/([^\.]+\.)+[^\.]{2,}/!d' > "${destination}" chmod 644 "${destination}" return 0 #fi # Individual file parsing: Keep comments, while parsing domains from each line # We keep comments to respect the list maintainer's licensing read -r firstLine < "${source}" # Determine how to parse individual source file formats if [[ "${firstLine,,}" =~ (adblock|ublock|^!) ]]; then # Compare $firstLine against lower case words found in Adblock lists echo -e " ${CROSS} Format: Adblock (list type not supported)" elif grep -q "^address=/" "${source}" &> /dev/null; then # Parse Dnsmasq format lists echo -e " ${CROSS} Format: Dnsmasq (list type not supported)" elif grep -q -E "^https?://" "${source}" &> /dev/null; then # Parse URL list if source file contains "http://" or "https://" # Scanning for "^IPv4$" is too slow with large (1M) lists on low-end hardware echo -ne " ${INFO} Format: URL" awk ' # Remove URL scheme, optional "username:password@", and ":?/;" # The scheme must be matched carefully to avoid blocking the wrong URL # in cases like: # http://www.evil.com?http://www.good.com # See RFC 3986 section 3.1 for details. /[:?\/;]/ { gsub(/(^[a-zA-Z][a-zA-Z0-9+.-]*:\/\/(.*:.*@)?|[:?\/;].*)/, "", $0) } # Skip lines which are only IPv4 addresses /^[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+$/ { next } # Print if nonempty length { print } ' "${source}" 2> /dev/null > "${destination}" chmod 644 "${destination}" echo -e "${OVER} ${TICK} Format: URL" else # Default: Keep hosts/domains file in same format as it was downloaded output=$( { mv "${source}" "${destination}"; } 2>&1 ) chmod 644 "${destination}" if [[ ! -e "${destination}" ]]; then echo -e "\\n ${CROSS} Unable to move tmp file to ${piholeDir} ${output}" gravity_Cleanup "error" fi fi } # Report number of entries in a table gravity_Table_Count() { local table="${1}" local str="${2}" local num num="$(sqlite3 "${gravityDBfile}" "SELECT COUNT(*) FROM ${table};")" if [[ "${table}" == "vw_gravity" ]]; then local unique unique="$(sqlite3 "${gravityDBfile}" "SELECT COUNT(DISTINCT domain) FROM ${table};")" echo -e " ${INFO} Number of ${str}: ${num} (${COL_BOLD}${unique} unique domains${COL_NC})" sqlite3 "${gravityDBfile}" "INSERT OR REPLACE INTO info (property,value) VALUES ('gravity_count',${unique});" else echo -e " ${INFO} Number of ${str}: ${num}" fi } # Output count of blacklisted domains and regex filters gravity_ShowCount() { gravity_Table_Count "vw_gravity" "gravity domains" "" gravity_Table_Count "vw_blacklist" "exact blacklisted domains" gravity_Table_Count "vw_regex_blacklist" "regex blacklist filters" gravity_Table_Count "vw_whitelist" "exact whitelisted domains" gravity_Table_Count "vw_regex_whitelist" "regex whitelist filters" } # Parse list of domains into hosts format gravity_ParseDomainsIntoHosts() { awk -v ipv4="$IPV4_ADDRESS" -v ipv6="$IPV6_ADDRESS" '{ # Remove windows CR line endings sub(/\r$/, "") # Parse each line as "ipaddr domain" if(ipv6 && ipv4) { print ipv4" "$0"\n"ipv6" "$0 } else if(!ipv6) { print ipv4" "$0 } else { print ipv6" "$0 } }' >> "${2}" < "${1}" } # Create "localhost" entries into hosts format gravity_generateLocalList() { local hostname if [[ -s "/etc/hostname" ]]; then hostname=$(< "/etc/hostname") elif command -v hostname &> /dev/null; then hostname=$(hostname -f) else echo -e " ${CROSS} Unable to determine fully qualified domain name of host" return 0 fi echo -e "${hostname}\\npi.hole" > "${localList}.tmp" # Empty $localList if it already exists, otherwise, create it : > "${localList}" chmod 644 "${localList}" gravity_ParseDomainsIntoHosts "${localList}.tmp" "${localList}" # Add additional LAN hosts provided by OpenVPN (if available) if [[ -f "${VPNList}" ]]; then awk -F, '{printf $2"\t"$1".vpn\n"}' "${VPNList}" >> "${localList}" fi } # Trap Ctrl-C gravity_Trap() { trap '{ echo -e "\\n\\n ${INFO} ${COL_LIGHT_RED}User-abort detected${COL_NC}"; gravity_Cleanup "error"; }' INT } # Clean up after Gravity upon exit or cancellation gravity_Cleanup() { local error="${1:-}" str="Cleaning up stray matter" echo -ne " ${INFO} ${str}..." # Delete tmp content generated by Gravity rm ${piholeDir}/pihole.*.txt 2> /dev/null rm ${piholeDir}/*.tmp 2> /dev/null rm /tmp/*.phgpb 2> /dev/null # Ensure this function only runs when gravity_SetDownloadOptions() has completed if [[ "${gravity_Blackbody:-}" == true ]]; then # Remove any unused .domains files for file in "${piholeDir}"/*."${domainsExtension}"; do # If list is not in active array, then remove it if [[ ! "${activeDomains[*]}" == *"${file}"* ]]; then rm -f "${file}" 2> /dev/null || \ echo -e " ${CROSS} Failed to remove ${file##*/}" fi done fi echo -e "${OVER} ${TICK} ${str}" # Only restart DNS service if offline if ! pgrep pihole-FTL &> /dev/null; then "${PIHOLE_COMMAND}" restartdns dnsWasOffline=true fi # Print Pi-hole status if an error occurred if [[ -n "${error}" ]]; then "${PIHOLE_COMMAND}" status exit 1 fi } helpFunc() { echo "Usage: pihole -g Update domains from blocklists specified in adlists.list Options: -f, --force Force the download of all specified blocklists -h, --help Show this help dialog" exit 0 } for var in "$@"; do case "${var}" in "-f" | "--force" ) forceDelete=true;; "-r" | "--recreate" ) recreate_database=true;; "-h" | "--help" ) helpFunc;; esac done # Trap Ctrl-C gravity_Trap if [[ "${recreate_database:-}" == true ]]; then str="Restoring from migration backup" echo -ne "${INFO} ${str}..." rm "${gravityDBfile}" pushd "${piholeDir}" > /dev/null || exit cp migration_backup/* . popd > /dev/null || exit echo -e "${OVER} ${TICK} ${str}" fi # Move possibly existing legacy files to the gravity database migrate_to_database if [[ "${forceDelete:-}" == true ]]; then str="Deleting existing list cache" echo -ne "${INFO} ${str}..." rm /etc/pihole/list.* 2> /dev/null || true echo -e "${OVER} ${TICK} ${str}" fi # Gravity downloads blocklists next gravity_CheckDNSResolutionAvailable gravity_DownloadBlocklists # Create local.list gravity_generateLocalList # Migrate rest of the data from old to new database gravity_swap_databases # Update gravity timestamp update_gravity_timestamp # Ensure proper permissions are set for the database chown pihole:pihole "${gravityDBfile}" chmod g+w "${piholeDir}" "${gravityDBfile}" # Compute numbers to be displayed gravity_ShowCount # Determine if DNS has been restarted by this instance of gravity if [[ -z "${dnsWasOffline:-}" ]]; then "${PIHOLE_COMMAND}" restartdns reload fi gravity_Cleanup echo "" "${PIHOLE_COMMAND}" status