MichaIng
5c17e41cf1
Start pihole-FTL after network
...
"$network" on a systemd-driven OS leads to "After=network-online.target" in the generated systemd unit.
This target is no guarantee that all network interfaces have been fully configured, as it depends on the related network services types, but at least it reduces the risk that those have not fully finished their job when pihole-FTL starts. If this is the case, certain issues can occur:
- https://github.com/pi-hole/pi-hole/issues/2924
- https://discourse.pi-hole.net/t/have-to-pihole-restartdns-after-reboot/28772
Runtime files are now consistently created in "/run" instead of "/var/run". The second is a symlink to the first for backwards compatibility but on none-ancient distro versions one should use "/run", systemd even prints a warnings if service files use "/var/run". The service file used "/run" and "/var/run" both, in cases for the same files/directories before, which does not directly cause issues currently, due to the symlink, but is inconsistent at best.
Signed-off-by: MichaIng <micha@dietpi.com>
2020-05-16 13:38:18 +02:00
pvogt09
3c6ea2612d
fix #3336 by creating adlist file even if no list was selected by user
...
Signed-off-by: pvogt09 <50047961+pvogt09@users.noreply.github.com>
2020-05-15 17:52:57 +02:00
MichaIng
7d79cf5cce
Only check SELinux states if "getenforce" command exists
...
- Currently, if the SELinux config file exists, installed SELinux is assumed.
- But removing e.g. an APT package via "apt-get remove" leaves config files in place, or they could be present for other reasons.
- If the getenforce command is not present but the config file is, currently the installer exists without error message when calling getenforce due to "set -e".
- With this change, the presence of getenforce command is checked first. If it is not present, selinux-utils is not installed, which is a core part of SELinux, pulled in by selinux-basics as well. So it can be assumed that no SELinux is active if this command is missing.
Signed-off-by: MichaIng <micha@dietpi.com>
2020-05-12 23:45:56 +02:00
Adam Warner
9e96ff37de
Fix merge conflicts
...
Signed-off-by: Adam Warner <me@adamwarner.co.uk>
2020-05-12 22:16:43 +01:00
Adam Warner
987ae3810d
binary, here, should be l_binary
...
Signed-off-by: Adam Warner <me@adamwarner.co.uk>
2020-05-11 22:03:33 +01:00
DL6ER
fdaf815f42
Merge pull request #3203 from MichaIng/patch-1
...
Failsafe checks for available APT package
2020-05-05 10:27:08 +02:00
DL6ER
988b1ff02f
Merge pull request #3204 from MichaIng/patch-3
...
Revert using hardcoded php-intl meta package
2020-05-05 10:24:56 +02:00
Dan Schaper
df13b9c32a
Merge pull request #3283 from pi-hole/tweak/remove_firewall_config
...
Remove configureFirewall function, the call to it, and related tests
2020-05-02 10:06:31 -07:00
DL6ER
f4965d8493
Merge pull request #3135 from pvogt09/development
...
Move permission change behind git reset
2020-04-28 19:44:58 +02:00
DL6ER
c0cf8dba87
Merge pull request #3226 from MichaIng/patch-6
...
Do not add pihole user to web server group
2020-04-28 19:39:55 +02:00
DL6ER
a9136d752a
Merge pull request #3246 from pvogt09/fix/user_exists
...
fixes #3217 by checking for existing pihole group
2020-04-28 19:38:12 +02:00
MichaIng
d7bac21149
Dot not add pihole user to web server group
...
This is and was never required and the pihole user does in fact not get any additional permissions through that group.
Signed-off-by: MichaIng <micha@dietpi.com>
2020-04-26 15:45:29 +02:00
MichaIng
dc6c53b6a3
Revert using hardcoded php-intl meta package
...
Using the meta package causes several issues:
- Install on Debian prior to Jessie and Ubuntu prior to Xenial is broken, since those do not serve the meta packages but php5-* packages instead.
- If $phpVer != "php", then multiple conflicting PHP versions can be installed.
- If "${phpVer}-intl" does not pull the correct package, then inherently "${phpVer}-xml" etc are wrong, too. This is theoretically possible, e.g. if PHP7.4 was installed while the webserver uses a concurrently installed PHP7.3 instance. Then the "php" shell command output can differ from what the webserver uses. This theoretical issue would need a different approach to derive $phpVer, not based on the shell command output but by asking the webserver somehow in the first place. But using $phpVer for some modules and hardcoded meta for the others can only lead to inconsistencies and issues.
Signed-off-by: MichaIng <micha@dietpi.com>
2020-04-26 15:44:13 +02:00
MichaIng
86d4c9b1e0
Failsafe checks for available APT package
...
When checking for available packages in APT repository, running a dry-run install can fail for other reasons, even if the package is available. Currently, in such case, wrong fallback packages are selected: https://github.com/pi-hole/pi-hole/issues/2888
"apt-cache show <pkg>" is a quicker method to check for available packages. This is now done as well to check if the fallbacks are available. If none is found, the installer exits with meaningful error message and exit code.
In rare cases, the APT list files can be missing when the installer is started. E.g. this could be on a fresh system, APT lists could have been moved to RAM or removed as a cleanup step. "apt-cache" calls will then fail, same as dry-run installs were. To assure that current package lists are checked, update the package cache directly after the Ubuntu universe repo has been added, only in the Debian/Ubuntu block. This renders the variable handling in RH/Fedora block obsolete.
Signed-off-by: MichaIng <micha@dietpi.com>
2020-04-26 15:42:43 +02:00
pvogt09
462457fe7f
Merge branch 'development' into development
2020-04-24 12:09:49 +02:00
Adam Warner
94a4f844a8
Remove deprecated list
...
Signed-off-by: Adam Warner <me@adamwarner.co.uk>
2020-04-20 21:31:20 +01:00
Adam Warner
d18a8b1b8a
Merge pull request #3205 from MichaIng/patch-5
...
Reduce apt-get install verbosity
2020-04-19 15:28:48 +01:00
Adam Warner
a37dba2c81
remove configureFirewall function, the call to it, and related tests
...
Signed-off-by: Adam Warner <me@adamwarner.co.uk>
2020-04-19 14:52:01 +01:00
Adam Warner
e6dcccc7bd
Revert "- Added 2 new DNS entries for the new Cloudflare DNS for families, which comes in 2 flavors ( #3276 )"
...
This reverts commit 7e1a8c1ceb
.
2020-04-18 20:05:54 +01:00
Mohammed Swillam
7e1a8c1ceb
- Added 2 new DNS entries for the new Cloudflare DNS for families, which comes in 2 flavors ( #3276 )
...
1- 1.1.1.2 (No Malware)
2- 1.1.1.3 (No Malware or Adult Content)
This would allow parents to have more control over the safety of their family's network.
Signed-off-by: Mohammed-Swillam <moh.sayed@hotmail.com>
2020-04-18 11:49:01 +01:00
DL6ER
982c1b0059
Merge branch 'release/v5.0' into development
...
Signed-off-by: DL6ER <dl6er@dl6er.de>
2020-04-08 12:02:53 +02:00
pvogt09
40ac3e7eb7
remove pihole group during uninstall
...
Signed-off-by: pvogt09 <50047961+pvogt09@users.noreply.github.com>
2020-04-04 19:22:37 +02:00
pvogt09
a993b8b34d
fixes #3217 by checking for existing pihole group
...
Signed-off-by: pvogt09 <50047961+pvogt09@users.noreply.github.com>
2020-04-03 13:18:32 +02:00
Antoine Tenart
16f664cdb4
basic_install: remove remaining references to hosts-file.net
...
Commit dc35709a1b
("Remove hosts-file.net from default lists") left a
few references to hosts-file.net. Removes them.
Signed-off-by: Antoine Tenart <antoine.tenart@ack.tf>
2020-04-02 21:23:55 +02:00
Adam Warner
dc35709a1b
Remove hosts-file.net from default lists
2020-03-31 17:39:21 +01:00
Adam Warner
4994da5170
Update automated install/basic-install.sh
2020-03-12 18:48:40 +00:00
Adam Warner
175d32c5f6
Set nameservers to be that which have been chosen by the user in the whiptail
...
Signed-off-by: Adam Warner <me@adamwarner.co.uk>
2020-03-11 18:55:43 +00:00
Adam Warner
1481cc583f
Don't set nameserver in dhcpcd.conf
...
Signed-off-by: Adam Warner <me@adamwarner.co.uk>
2020-03-11 18:48:40 +00:00
Adam Warner
dbc54b3063
remove resolvconf dep
...
Signed-off-by: Adam Warner <me@adamwarner.co.uk>
2020-03-11 18:47:59 +00:00
MichaIng
bb936f4fdb
Reduce apt-get install verbosity
...
The new version of the installer moved from debconf-apt-progress to raw apt-get output on installs to solve issues with interactive config file choices. This lead to a largely increases amount of output lines of the installer. To reduce the apt-get output to a minimum, while sustaining interactive input in case of config files, the "-qq" option can be used, which inherits "--yes":
- https://manpages.debian.org/buster/apt/apt-get.8.en.html#OPTIONS
- https://manpages.ubuntu.com/manpages/bionic/man8/apt-get.8.html#options
Signed-off-by: MichaIng <micha@dietpi.com>
2020-03-11 11:01:28 +01:00
XhmikosR
7b8611ced0
Assorted typo fixes. ( #3126 )
...
* Assorted typo fixes.
Signed-off-by: XhmikosR <xhmikosr@gmail.com>
Co-authored-by: Dan Schaper <dan.schaper@pi-hole.net>
2020-03-08 16:53:14 -07:00
msamendinger
d16b472592
Remove wget from PIHOLE_DEPS
...
All external calls have been moved to curl, wget no longer needed as
dependency
Signed-off-by: msamendinger <git@samendinger.de>
2020-03-01 22:06:37 +01:00
Adam Warner
6104d81622
Safeguard against colour output in grep commandadd -i to grep to make search for "Location" case-insensitive
...
Signed-off-by: Adam Warner <me@adamwarner.co.uk>
2020-02-24 20:36:45 +00:00
Adam Warner
7be019ff52
No need to determine the latest tag, we can just go direct
...
Co-authored-by: Dan Schaper <dan.schaper@pi-hole.net>
Signed-off-by: Adam Warner <me@adamwarner.co.uk>
2020-02-17 21:29:25 +00:00
DL6ER
75633f0950
Install php-intl and trust the system to install the right extension. We've seen reports that just installing php5-intl or php7-intl isn't sufficient and that we need the meta package as well.
...
Signed-off-by: DL6ER <dl6er@dl6er.de>
2020-02-16 21:24:32 +01:00
Adam Warner
1072078e26
Change to use API instead of the Location Header
...
(some trailing whitespace removed)
Signed-off-by: Adam Warner <me@adamwarner.co.uk>
2020-02-16 11:47:42 +00:00
pvogt09
b0f1333657
Move permission change behind git reset (like in update_repo()) and remove whitespace at end of line
...
Signed-off-by: pvogt09 <50047961+pvogt09@users.noreply.github.com>
2020-02-14 20:43:36 +01:00
Adam Warner
0a70bbd255
Merge pull request #3120 from canihavesomecoffee/patch-1
...
Update Cameleon blacklist url to use https
2020-02-08 17:25:49 +00:00
Willem
c91d9cc0b6
Update Cameleon blacklist url to use https
...
Switches from http to https for the Cameleon (sysctl.org) blacklist.
Signed-off-by: canihavesomecoffee <canihavesomecoffee@users.noreply.github.com>
2020-02-08 17:06:03 +01:00
DL6ER
cfa909a93d
Add package php-intl for AdminLTE#1130.
...
Signed-off-by: DL6ER <dl6er@dl6er.de>
2020-01-12 14:09:14 +01:00
Adam Warner
e0fde41d87
Merge pull request #3066 from pi-hole/centos8_support
...
Update installer to support CentOS 8
2020-01-05 14:39:24 +00:00
bcambl
ec8f4050d0
Update installer to support CentOS 8
...
PHP dependency php-json is now required for both the latest Fedora and CentOS.
Package php-json will now be a default web dependency and removed from PIHOLE_WEB_DEPS when installing on CentOS7.
Signed-off-by: bcambl <blayne@blaynecampbell.com>
2020-01-02 06:52:23 -06:00
bcambl
60c51886e0
remove unused debian deps (apt-utils debconf)
...
Signed-off-by: bcambl <blayne@blaynecampbell.com>
2020-01-01 13:24:02 -06:00
bcambl
cbb1461010
add stdout horizontal rule to install_dependent_packages()
...
Signed-off-by: bcambl <blayne@blaynecampbell.com>
2020-01-01 13:23:31 -06:00
bcambl
07cc5b501c
replace debconf-apt-progress with apt-get in install_dependent_packages()
...
Removes the need for conditional debconf-apt-progress dependency checking
Signed-off-by: bcambl <blayne@blaynecampbell.com>
2020-01-01 13:11:41 -06:00
bcambl
ebb1a730c1
remove unused fedora/centos dependency: dialog
...
Signed-off-by: bcambl <blayne@blaynecampbell.com>
2020-01-01 13:11:41 -06:00
MichaIng
9dff55b212
Installer | Remove "dialog" from Debian/Ubuntu installer deps
...
+ The installer uses `whiptail`, thus `dialog` is not required.
Signed-off-by: MichaIng <micha@dietpi.com>
2020-01-01 13:11:41 -06:00
Adam Warner
d1bce7e685
Merge pull request #2995 from pi-hole/tweak/NoFurtherThanLatestTag
...
Don't allow repo to go further than latest tag on master
2019-12-09 20:41:29 +00:00
Adam Warner
7c2bbf840a
Merge pull request #2993 from MichaIng/patch-3
...
Minor installer output enhancements
2019-12-04 18:53:58 +00:00
MichaIng
85673b8273
Print name of chosen upstream DNS as well
...
Signed-off-by: MichaIng <micha@dietpi.com>
2019-12-04 18:59:25 +01:00
Adam Warner
583ea4d17a
Merge branch 'development' into development
2019-11-27 21:17:05 +00:00
Adam Warner
edcdf9f619
Merge pull request #3003 from pi-hole/fix/tbd
...
FTL always determined.
2019-11-27 09:46:17 +00:00
Adam Warner
12817c09bb
(Squashed commits)
...
Always ensure we have the correct machine arch by storing to/reading from a file rather than depending on global variable that for some reason is not always populated...
Signed-off-by: Adam Warner <me@adamwarner.co.uk>
no need for global variable
Signed-off-by: Adam Warner <me@adamwarner.co.uk>
Use a file in the temporary FTL download directory
Signed-off-by: Dan Schaper <dan.schaper@pi-hole.net>
Local binary variable named to l_binary. Disambiguate from global binary.
Allow 'binary' to be shadowed for testing.
Use ./ftlbinary in all operations.
Signed-off-by: Dan Schaper <dan.schaper@pi-hole.net>
Revert shadow ability on binary variable.
Signed-off-by: Dan Schaper <dan.schaper@pi-hole.net>
Remove unused tests, binary variable can not be overridden.
Signed-off-by: Dan Schaper <dan.schaper@pi-hole.net>
This should work here, too
Signed-off-by: Adam Warner <me@adamwarner.co.uk>
binary name is passed through from pihole checkout
Signed-off-by: Adam Warner <me@adamwarner.co.uk>
Add comments
Signed-off-by: Adam Warner <me@adamwarner.co.uk>
OK, let's try it this way again
Signed-off-by: Adam Warner <me@adamwarner.co.uk>
we might be getting somewhere.. squash after this I think!
Signed-off-by: Adam Warner <me@adamwarner.co.uk>
This is a test to see if it fixes the aarch64 test (we are definitely squashing these commits
Signed-off-by: Adam Warner <me@adamwarner.co.uk>
fix the rest of the tests
Signed-off-by: Adam Warner <me@adamwarner.co.uk>
Remove trailing whitespace in the files we've touched here
Signed-off-by: Adam Warner <me@adamwarner.co.uk>
2019-11-15 19:49:09 +00:00
Adam Warner
4840bdb031
add a double space to the beginning of some outputs
...
Signed-off-by: Adam Warner <me@adamwarner.co.uk>
2019-11-14 19:06:23 +00:00
Adam Warner
a85e7a2a43
Merge pull request #2999 from pi-hole:fix/api_utf8_encoding
...
Add php-xml package as new dependency
2019-11-13 19:03:53 +00:00
DL6ER
61d233f069
Merge pull request #2964 from bcambl/selinux_enforcing
...
Exit installation when SELinux in unsupported state
2019-11-12 21:48:15 +01:00
DL6ER
d457d40e0b
Add php-xml package as new dependency.
...
Signed-off-by: DL6ER <dl6er@dl6er.de>
2019-11-12 20:49:46 +01:00
Adam Warner
6571a63ffa
Add --tags to descibe command
...
Signed-off-by: Adam Warner <me@adamwarner.co.uk>
2019-11-11 20:36:51 +00:00
Adam Warner
a7e81c8ea0
remove extra space
...
Signed-off-by: Adam Warner <me@adamwarner.co.uk>
2019-11-11 20:12:31 +00:00
Adam Warner
73d9abae3e
And finally, we please stickler
...
Signed-off-by: Adam Warner <adamw@rner.email>
2019-11-08 20:58:42 +00:00
Adam Warner
c8b9e42649
Please Codefactor.
...
Signed-off-by: Adam Warner <adamw@rner.email>
2019-11-08 19:18:35 +00:00
Adam Warner
62c00ae1d8
pushd/popd instead of juggling with a variable
...
Signed-off-by: Adam Warner <adamw@rner.email>
2019-11-08 19:11:55 +00:00
MichaIng
ea67c828cd
Minor installer output enhancements
...
+ Print restart hint after setting IPv4 address on a separate line with [i] prefix to not break text alignment
+ Print final upstream DNS choice as a single printf call and by this fix missing info and linebreak on "Custom" choices.
+ Minor if/then/else code alignment
Signed-off-by: MichaIng <micha@dietpi.com>
2019-11-07 13:59:44 +01:00
Adam Hill
3fbb0ac8dd
Adding docker+arm detection & FTL download
...
Signed-off-by: Adam Hill <adam@diginc.us>
2019-10-29 22:26:46 -05:00
Adam Warner
71903eb27f
Add in checks to reset cloned repo to the lastest available release
...
Signed-off-by: Adam Warner <me@adamwarner.co.uk>
2019-10-28 22:35:01 +00:00
bcambl
612d408034
replace echo with printf in install_dependent_packages()
...
Signed-off-by: bcambl <blayne@blaynecampbell.com>
2019-10-14 20:16:40 -06:00
bcambl
a86f578139
replace echo with printf in checkSelinux()
...
Signed-off-by: bcambl <blayne@blaynecampbell.com>
2019-10-14 20:06:23 -06:00
bcambl
81ca78e7f4
exit installer if SELinux is enforcing
...
The Pi-hole project does not ship a custom SELinux policy as the required policy would lower the overall system security.
Users who require SELinux to be enforcing are encouraged to create an custom policy on a case-by-case basis.
Signed-off-by: bcambl <blayne@blaynecampbell.com>
2019-10-14 12:25:24 -06:00
bcambl
fc0899b2ad
fix fedora dependency check/install stdout
...
Signed-off-by: bcambl <blayne@blaynecampbell.com>
2019-10-13 14:35:38 -06:00
DL6ER
149fb0c216
Do not install a blank regex file.
...
Signed-off-by: DL6ER <dl6er@dl6er.de>
2019-09-29 18:03:37 +02:00
Adam Warner
61a40c1b43
merge devel into 4.3.2 And Resolve merge conflicts
...
Signed-off-by: Adam Warner <me@adamwarner.co.uk>
2019-09-22 01:16:44 +01:00
DL6ER
f582344b9a
"No default index.lighttpd.html file found... not backing up" is not an error.
...
Signed-off-by: DL6ER <dl6er@dl6er.de>
2019-09-17 21:59:48 +02:00
Dan Schaper
4cfe463dfa
Add back dropped binary call.
...
Signed-off-by: Dan Schaper <dan.schaper@pi-hole.net>
2019-08-24 04:57:23 -07:00
Dan Schaper
03c65dd0e9
Convert hardcoded /usr/local/bin to variable
...
Update pihole script with full path to 'pihole'
Variable for webpage.sh 'pihole' call.
Signed-off-by: Dan Schaper <dan.schaper@pi-hole.net>
2019-08-24 04:49:14 -07:00
DL6ER
1820c2c598
Merge branch 'development' into new/whitelist-regex-support
...
Signed-off-by: DL6ER <dl6er@dl6er.de>
2019-08-22 14:19:51 +02:00
Mcat12
febdbceab1
Fix error when getting latest FTL tag
...
The headers containing the latest FTL tag were not properly input to the
command (`<` vs `<<<`). This caused Bash to try and open the file named
after the header string, which does not exist.
Signed-off-by: Mcat12 <newtoncat12@yahoo.com>
2019-08-21 10:03:54 -04:00
David Haguenauer
34727c00c6
Drop indirection from install_dependent_packages
...
Previously, install_dependent_packages would receive an array variable
name as its single parameter, and would use variable indirection to
access it; this change simplifies that function so that it instead
receives the expanded array.
Signed-off-by: David Haguenauer <ml@kurokatta.org>
2019-08-21 04:41:45 -07:00
Mcat12
b107ae2ab9
Use the filtered IPv6 OpenDNS servers
...
The ones we were using previously were not filtered. See
https://support.opendns.com/hc/en-us/articles/227986667-Does-OpenDNS-Support-IPv6-
Signed-off-by: Mcat12 <newtoncat12@yahoo.com>
2019-08-21 04:39:10 -07:00
Mcat12
da398c3d9c
Print an error message if the FTL release metadata download fails
...
Signed-off-by: Mcat12 <newtoncat12@yahoo.com>
2019-08-21 04:38:51 -07:00
Mcat12
4e0ad52001
Fix ShellCheck issue by refactoring a bit
...
Signed-off-by: Mcat12 <newtoncat12@yahoo.com>
2019-08-21 04:38:24 -07:00
Mcat12
c9829dd3e4
Fix pihole -up showing FTL update when network is down
...
Fixes #1877
Signed-off-by: Mcat12 <newtoncat12@yahoo.com>
2019-08-21 04:38:04 -07:00
B. Olausson
ab1ea5a366
This change fixes issue #145 "stty: standard input: Inappropriate ioctl for device ".It checks if a real terminal exist, if not it sets the screen size to a fixed value. This helps to avoid nasty and unnecessary logs when running "pihole -up" via e.g. cron.
...
Signed-off-by: B. Olausson <contactme@olausson.de>
2019-08-20 14:48:03 -07:00
bcambl
10de7f649b
add chkconfig to INSTALLER_DEPS (CentOS/Fedora)
...
chkconfig is a dependency of spawn-fcgi which is a dependency of lighttpd which is installed via PIHOLE_WEB_DEPS in phase 2
adding chkconfig to INSTALLER_DEPS to ensure /etc/init.d is present during the installation prompts (phase 1)
Signed-off-by: bcambl <blayne@blaynecampbell.com>
2019-08-20 11:42:09 -07:00
Mcat12
71d5b42726
Remove the ZeusTracker blocklist from the defaults
...
It is no longer served. Fixes #2843 .
Signed-off-by: Mcat12 <newtoncat12@yahoo.com>
2019-08-20 11:05:06 -07:00
DL6ER
4371c9ba03
Ensure proper permissions are set for gravity.db after creation.
...
Signed-off-by: DL6ER <dl6er@dl6er.de>
2019-08-05 21:20:07 +02:00
B. Olausson
ecd6817aaf
This change fixes issue #145 "stty: standard input: Inappropriate ioctl for device ".It checks if a real terminal exist, if not it sets the screen size to a fixed value. This helps to avoid nasty and unnecessary logs when running "pihole -up" via e.g. cron.
...
Signed-off-by: B. Olausson <contactme@olausson.de>
2019-07-29 19:48:56 +01:00
Mark Drobnak
3420439f31
Merge pull request #2820 from pi-hole/fix/ftl-update-no-network
...
Fix pihole -up showing FTL update when network is down
2019-07-20 14:55:48 -04:00
Mcat12
38ff343134
Print an error message if the FTL release metadata download fails
...
Signed-off-by: Mcat12 <newtoncat12@yahoo.com>
2019-07-19 17:35:21 -07:00
Mcat12
c3ec2e68ad
Remove the ZeusTracker blocklist from the defaults
...
It is no longer served. Fixes #2843 .
Signed-off-by: Mcat12 <newtoncat12@yahoo.com>
2019-07-12 20:03:36 -07:00
Mcat12
c156af020c
Use suggested array creation to fix linter error
...
Signed-off-by: Mcat12 <newtoncat12@yahoo.com>
2019-07-10 19:52:17 -07:00
Mark Drobnak
fa8751f9ad
Fix error when checking if IP address is valid
...
During install in `valid_ip`, we split up the IP address into octets to verify it is valid (each is <= 255).
This validation was broken in #2743 when a variable usage was quoted where it should have stayed unquoted:
```
./automated install/basic-install.sh: line 942: [[: 192.241.211.120: syntax error: invalid arithmetic operator (error token is ".241.211.120")
```
Due to this error, `127.0.0.1` would be used instead of the requested IP address. Also, this prevented the user from entering a custom DNS server as it would be marked as an invalid IP address.
Signed-off-by: Mark Drobnak <mark.drobnak@gmail.com>
2019-07-10 19:42:51 -07:00
bcambl
ec850dc820
add chkconfig to INSTALLER_DEPS (CentOS/Fedora)
...
chkconfig is a dependency of spawn-fcgi which is a dependency of lighttpd which is installed via PIHOLE_WEB_DEPS in phase 2
adding chkconfig to INSTALLER_DEPS to ensure /etc/init.d is present during the installation prompts (phase 1)
Signed-off-by: bcambl <blayne@blaynecampbell.com>
2019-07-06 10:58:19 -06:00
Mcat12
37e7cd5211
Fix ShellCheck issue by refactoring a bit
...
Signed-off-by: Mcat12 <newtoncat12@yahoo.com>
2019-06-28 21:19:07 -07:00
Mcat12
91a2d052a7
Fix pihole -up showing FTL update when network is down
...
Fixes #1877
Signed-off-by: Mcat12 <newtoncat12@yahoo.com>
2019-06-28 20:49:56 -07:00
Mcat12
c8987e20c2
Use the filtered IPv6 OpenDNS servers
...
The ones we were using previously were not filtered. See
https://support.opendns.com/hc/en-us/articles/227986667-Does-OpenDNS-Support-IPv6-
Signed-off-by: Mcat12 <newtoncat12@yahoo.com>
2019-06-12 19:13:29 -07:00
Dan Schaper
7de6bbca61
Merge branch 'development' into release/v4.3
2019-05-18 13:18:14 -07:00
David Haguenauer
be3a21ae07
Put quotes at ends of strings
...
Signed-off-by: David Haguenauer <ml@kurokatta.org>
2019-05-14 15:20:28 -04:00
David Haguenauer
69081a9175
Drop indirection from install_dependent_packages
...
Previously, install_dependent_packages would receive an array variable
name as its single parameter, and would use variable indirection to
access it; this change simplifies that function so that it instead
receives the expanded array.
Signed-off-by: David Haguenauer <ml@kurokatta.org>
2019-05-14 15:20:28 -04:00
David Haguenauer
ab2f8a0c09
Quote variables in basic-install.sh
...
This greatly reduces the number of warnings emitted by ShellCheck, and
in turn should make it more likely that errors are caught in the
future.
Signed-off-by: David Haguenauer <ml@kurokatta.org>
2019-05-14 15:20:28 -04:00
Mcat12
8e1bf6e3d4
Merge branch 'development' into new/gravitydb
...
# Conflicts:
# advanced/Scripts/list.sh
# gravity.sh
# pihole
2019-05-12 15:20:52 -07:00
pvogt09
efbd42f7b5
Moves creation of pihole user before FTL installation
...
Signed-off-by: pvogt09 <50047961+pvogt09@users.noreply.github.com>
2019-05-12 11:27:25 +02:00
pvogt09
e076db5a4e
Changes ownership of macvendor.db to pihole
...
Signed-off-by: pvogt09 <50047961+pvogt09@users.noreply.github.com>
2019-05-10 11:19:28 +02:00
pvogt09
2e6198077d
chmod 644 adlists.list
...
Signed-off-by: pvogt09 <50047961+pvogt09@users.noreply.github.com>
2019-05-09 12:23:44 +02:00
DL6ER
95150a5d85
Clone twenty instead of only one commit when installing Pi-hole. This ensures that we clone at least one tagged commit in case we need to push changes to master.
...
Signed-off-by: DL6ER <dl6er@dl6er.de>
2019-05-07 19:42:11 +02:00
pvogt09
4d23b3267f
Adds X to chmod for git operations
...
Signed-off-by: pvogt09 <50047961+pvogt09@users.noreply.github.com>
2019-05-07 10:46:16 +02:00
pvogt09
e19adccd9c
Moves chmod for /var/www/html into INSTALL_WEB_SERVER block
...
Signed-off-by: pvogt09 <50047961+pvogt09@users.noreply.github.com>
2019-05-05 22:34:13 +02:00
pvogt09
a25f331e83
Adds chmod 644 for /var/www and /var/www/html
...
Signed-off-by: pvogt09 <50047961+pvogt09@users.noreply.github.com>
2019-05-05 09:20:49 +02:00
pvogt09
69c06ba6fe
Sets permissions for dnsmaq.conf
...
Signed-off-by: pvogt09 <50047961+pvogt09@users.noreply.github.com>
2019-05-05 00:32:10 +02:00
pvogt09
2c3a27e9c7
Replaces cp chmod with install and add read permission to repository files after checkout and pull
...
Signed-off-by: pvogt09 <50047961+pvogt09@users.noreply.github.com>
2019-05-03 12:27:56 +02:00
pvogt09
8a92fb24c4
Incorporates changes requested by @Mcat12
...
Signed-off-by: pvogt09 <50047961+pvogt09@users.noreply.github.com>
2019-05-01 11:20:26 +02:00
pvogt09
5c575e73c7
Adds world readable attribute to files created by Pi-hole to circumvent #2724
...
Signed-off-by: pvogt09 <50047961+pvogt09@users.noreply.github.com>
2019-04-30 22:41:12 +02:00
Mcat12
466fd79c66
Fix getting IP address in the presence of similar subnets
...
Change was suggested by @computergeek125 in #2387
Signed-off-by: Mcat12 <newtoncat12@yahoo.com>
2019-04-27 12:39:45 -07:00
DL6ER
0efc46260f
Use both old and new strings for detecting whether this is a Pi-hole dnsmasq config file
...
Signed-off-by: DL6ER <dl6er@dl6er.de>
2019-04-26 16:16:30 +02:00
DL6ER
ee4dabeca6
Merge branch 'development' into new/gravitydb
...
Signed-off-by: DL6ER <dl6er@dl6er.de>
2019-04-24 19:12:19 +02:00
DL6ER
c13ebd3a9d
Replace Pi-hole ID string with another line we intend to keep
...
Signed-off-by: DL6ER <dl6er@dl6er.de>
2019-04-24 18:55:25 +02:00
Jan Piskvor Martinec
037737d653
Show $UPDATE_PKG_CACHE content in error message.
...
Fixes the typo in update_package_cache(), where the error message
contained the color code twice, instead of the $UPDATE_PKG_CACHE text.
Signed-off-by: Jan Piskvor Martinec <github@piskvor.org>
2019-04-23 16:02:25 +02:00
Mcat12
78c0c58946
Add a link to the documentation on FTL privacy levels during install
...
Closes #2695
Signed-off-by: Mcat12 <newtoncat12@yahoo.com>
2019-04-07 12:00:43 -07:00
DL6ER
9867b7fccf
Don't fail when trying to detect OS architecture on RPM-based systems
...
Signed-off-by: DL6ER <dl6er@dl6er.de>
2019-02-22 18:41:01 +01:00
Andreas Schneider
860ec1a7c4
basic_install: Use install for sudoers
...
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
2019-02-10 08:45:03 +01:00
Andreas Schneider
2f189cd076
basic_install: There is no pihole group, remove it
...
Only a user has been created beforehand. Only some distributions create
a group with the same name based on their configuration. We cannot
assume this is always the default.
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
2019-02-08 08:06:12 +01:00
Andreas Schneider
2f0e6a6dda
basic_install: Make sure the PI_HOLE_CONFIG_DIR exists
...
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
2019-02-08 08:06:12 +01:00
Andreas Schneider
f187b42a98
basic_install: Define webroot globally as a variable
...
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
2019-02-08 08:06:02 +01:00
Andreas Schneider
838e1b19ec
basic_install: Set permissons for PI_HOLE_DASHBOARD_DIR
...
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
2019-02-06 10:41:37 +01:00
Andreas Schneider
d5bbb2b640
basic_install: Use a varibale for the pihole dashboard dir
...
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
2019-02-06 10:40:47 +01:00
Andreas Schneider
dc91d4b1f9
basic_install: If a static interface is already set up we are done
...
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
2019-02-06 07:50:21 +01:00
Mcat12
680d6e2d31
Merge branch 'release/v4.2' into development
...
# Conflicts:
# automated install/basic-install.sh
2019-02-03 11:14:09 -08:00
Adam Warner
ae654730c4
Update automated install/basic-install.sh
...
Co-Authored-By: DL6ER <DL6ER@users.noreply.github.com>
2019-02-02 08:00:58 +01:00
DL6ER
ec79e86bee
We should really use stop_service as it also includes some nice output
...
Signed-off-by: DL6ER <dl6er@dl6er.de>
2019-02-01 18:06:57 +01:00
DL6ER
e8dabc71af
Don't try to start pihole-FTL after it has been installed. This will be done a few moments later when gravity is invoked.
...
Signed-off-by: DL6ER <dl6er@dl6er.de>
2019-02-01 17:54:21 +01:00
DL6ER
9c0de0f731
Try to stop pihole-FTL before and (re)start pihole-FTL after the install command
...
Signed-off-by: DL6ER <dl6er@dl6er.de>
2019-02-01 17:39:12 +01:00
DL6ER
4948862dce
Fail hard if FTL binary could not be installed
...
Signed-off-by: DL6ER <dl6er@dl6er.de>
2019-01-31 20:10:52 +01:00
Mark Drobnak
1e284f69ea
Merge pull request #2587 from pi-hole/new/network-table
...
Download macvendor database
2019-01-28 20:27:13 -05:00
DL6ER
516ed83638
Add "|| true" to the curl command as a failed download is no show-stopper for the overall install process.
...
Signed-off-by: DL6ER <dl6er@dl6er.de>
2019-01-28 20:48:30 +01:00
DL6ER
cc657c0c26
Rename subroutine start_service() to restart_service() because this is what it does
...
Signed-off-by: DL6ER <dl6er@dl6er.de>
2019-01-24 09:37:03 +01:00
DL6ER
d90d7b6927
Call FTL download/installation early on in the installation process.
...
Signed-off-by: DL6ER <dl6er@dl6er.de>
2019-01-24 09:36:27 +01:00
DL6ER
de6dc90575
Don't diable pihole-FTL before calling install. root should be able to overwrite the binary in any case. The binary has already been downloaded and hash-verified here so we don't expect any errors in this binary.
...
Signed-off-by: DL6ER <dl6er@dl6er.de>
2019-01-24 09:32:33 +01:00
DL6ER
3cdd6204c5
Move dnsmasq disabling and config file rewriting into a dedicated subroutine
...
Signed-off-by: DL6ER <dl6er@dl6er.de>
2019-01-24 09:31:02 +01:00
DL6ER
d996e9c9ee
Fix inconsistent handling of binary variable. get_binary_variable() stores the result into a global variable we pass later on as argument to FTLinstall() and define a local variable with the same name. This is fixed by only using the globa variable in all places not. This is still not a very elegant solution but it is also not subject of the current PR.
...
Signed-off-by: DL6ER <dl6er@dl6er.de>
2019-01-24 09:28:09 +01:00
Mark Drobnak
ebba32e1c4
Remove Norton DNS
...
Signed-off-by: Mark Drobnak <mark.drobnak@gmail.com>
2019-01-19 20:45:19 -05:00
Mark Drobnak
7d2507527a
Merge pull request #2593 from TheLastProject/feature/standardized-dns-list
...
Standardize DNS list and write to file for AdminLTE
2019-01-13 11:10:45 -08:00
Sylvia van Os
97decb3a73
Standardize DNS list and write to file for AdminLTE
...
Signed-off-by: Sylvia van Os <sylvia@hackerchick.me>
2019-01-13 19:38:04 +01:00
DL6ER
f360959efc
Download macvendor database from ftl.pi-hole.net when downloading a new FTL binary. Users who want to update the database more frequently than on each FTL release can use the python script from the FTL repository to generate the database themselves. The macvendor database is an optional component so a failing download is no reason to interrupt the installer.
...
Signed-off-by: DL6ER <dl6er@dl6er.de>
2019-01-09 19:26:19 +01:00
bcambl
3035fbf468
remove unused dependency (bc)
...
Signed-off-by: bcambl <blayne@blaynecampbell.com>
2019-01-04 17:17:42 -06:00
DL6ER
c5da1bb952
Add libcap as Fedora dependency
...
Signed-off-by: DL6ER <dl6er@dl6er.de>
2019-01-03 10:39:46 +01:00
DL6ER
486c41a69a
Add Debain dependency libcap2 needed for FTL's capability check on startup
...
Signed-off-by: DL6ER <dl6er@dl6er.de>
2019-01-03 10:39:10 +01:00
Florian Freund
0ef4901e48
Add a blank after printf to avoid 'Command not found' error
...
> curl -L https://install.pi-hole.net | bash /dev/stdin --i_do_not_follow_recommendations
...
/dev/stdin: Zeile 2449: printf %b Skipping free disk space verification\n: Command not found.
Signed-off-by: Florian Freund <mail@floek.net>
2018-12-25 09:02:12 +01:00
bcambl
eca975a370
add sqlite3 dependency for fedora
...
`sqlite3` is provided by the `sqlite` package on CentOS & Fedora
Signed-off-by: bcambl <blayne@blaynecampbell.com>
(cherry picked from commit 724afc000f
)
2018-12-19 10:20:47 -08:00
bcambl
724afc000f
add sqlite3 dependency for fedora
...
`sqlite3` is provided by the `sqlite` package on CentOS & Fedora
Signed-off-by: bcambl <blayne@blaynecampbell.com>
2018-12-17 21:03:54 -06:00
Mark Drobnak
d24e0a6060
Merge pull request #2540 from pi-hole/release/v4.1
...
Update development with final v4.1 changes
2018-12-09 22:24:42 -05:00
bcambl
14ebb2fb93
remove 'System' from NetworkManager connection name
...
Signed-off-by: bcambl <blayne@blaynecampbell.com>
2018-12-01 12:08:48 -06:00
Clayton Dobbs
3261c2e273
Added check for universe repo on ubuntu bionic with user prompts.
...
Signed-off-by: Clayton Dobbs <clayton.dobbs@gmail.com>
2018-11-20 21:39:01 -07:00
bcambl
c3804877ed
linting: Double quote to prevent globbing and word splitting.
...
Signed-off-by: bcambl <blayne@blaynecampbell.com>
2018-11-11 14:48:16 -06:00
bcambl
c0bc93c7c4
break dhcpcd and ifcfg network configurations into separate functions
...
- move some logic from setStaticIPv4 to setDHCPCD
- breakout ifcfg configuration into separate function which takes a config path as an argument
- setStaticIPv4 now checks for configs and calls the appropriate function accordingly
- add logic to check ifcfg file by _connection name_ if file is not found by _interface name_
Signed-off-by: bcambl <blayne@blaynecampbell.com>
2018-11-09 15:20:51 -06:00
DL6ER
e1c3c53058
Merge branch 'release/v4.1' into fix/adlists.list_not_created
2018-11-08 20:29:07 +01:00
Dan Schaper
057fbfc2b9
Change field from digit to string for printf
...
Signed-off-by: Dan Schaper <dan.schaper@pi-hole.net>
2018-11-08 11:10:09 -08:00
DL6ER
33156071cd
Fix literal "choice" being passed to appendToListsFile()
...
Signed-off-by: DL6ER <dl6er@dl6er.de>
2018-11-08 19:43:35 +01:00
Dan Schaper
e8c2e26358
Override shellcheck with explanations.
...
Signed-off-by: Dan Schaper <dan.schaper@pi-hole.net>
2018-11-03 13:39:43 -07:00
Dan Schaper
61c67849d7
Support multiple distributions and release versions in find_IPv4_information().
...
Add basic sanity check to function, remove unused variable.
Signed-off-by: Dan Schaper <dan.schaper@pi-hole.net>
2018-11-03 13:20:40 -07:00
Mark Drobnak
2cdbb34763
Merge pull request #2488 from pi-hole/feature/command_function
...
Moved `command -v` calls to function in installer.
2018-11-02 22:16:44 -04:00
Mark Drobnak
1789a2db29
Merge pull request #2384 from pi-hole/feature/install-privacy-level
...
Set FTL Privacy Level During Install
2018-11-01 15:16:11 -04:00
Dan Schaper
c270b83341
Use printf instead of echo
...
Co-Authored-By: Mcat12 <mark.drobnak@gmail.com>
2018-11-01 15:14:26 -04:00
Dan Schaper
02f0788033
Moved command -v
calls to function.
...
Signed-off-by: Dan Schaper <dan.schaper@pi-hole.net>
2018-11-01 12:00:08 -07:00
Dan Schaper
9d2d45b473
Query php directly for major and minor version id strings.
...
Signed-off-by: Dan Schaper <dan.schaper@pi-hole.net>
2018-11-01 05:59:14 -07:00
Dan Schaper
0c892e6b3a
Addressed Stickler ShellCheck lints
...
Signed-off-by: Dan Schaper <dan.schaper@pi-hole.net>
2018-10-31 14:35:55 -07:00
Dan Schaper
a0fc38d6a2
All terminal echo commands changed to printf.
...
Signed-off-by: Dan Schaper <dan.schaper@pi-hole.net>
2018-10-31 11:14:05 -07:00
bcambl
e7e03e36de
fix pihole user creation function
...
- fix stdout newlines
- catch failed user creation
Signed-off-by: bcambl <blayne@blaynecampbell.com>
2018-10-12 11:05:44 -06:00
Adam Warner
cc2f375b13
fix for #2450
...
Signed-off-by: Adam Warner <adamw@rner.email>
2018-10-07 11:51:36 +01:00
Mark Drobnak
a89615365e
Merge pull request #2410 from stuartskelton/norton_dns_EOL_2018_11_15
...
Remove Norton Connect Safe as its EOL 2018-11-15
2018-09-10 17:52:09 -04:00
Stuart Skelton
3c36c22ca8
Remove Norton Connect Safe as its EOL 2018-11-15
...
Signed-off-by: Stuart Skelton <stuarts@broadbean.com>
2018-09-10 22:37:45 +01:00
Mark Drobnak
6f276ae4bb
Merge pull request #2299 from nullr0ute/net-tools
...
Use ip route rather than old net-tools route in chronometer.sh
2018-09-09 15:11:19 -04:00
Mark Drobnak
3cea1bd423
Fix lighttpd v1.4.50 crashing on startup
...
It has a bug/regression causing it to fail if external.conf does not exist,
so touch external.conf when installing lighttpd config
Signed-off-by: Mark Drobnak <mark.drobnak@gmail.com>
2018-09-07 12:09:37 -04:00
bcambl
c58e3acc78
add unsupported RPM distro warnings
...
Signed-off-by: bcambl <blayne@blaynecampbell.com>
2018-08-31 10:04:52 -06:00
bcambl
6f8e8e98bb
update centos version check test
...
Signed-off-by: bcambl <blayne@blaynecampbell.com>
2018-08-29 22:16:11 -06:00
bcambl
24b4aabae9
allow installer to continue with additional rpm based distros
...
- FedBerry (Fedora based ARM image)
- Scientific Linux (CentOS based)
- Add prompt to continue installing on unsupported RPM based distros
Signed-off-by: bcambl <blayne@blaynecampbell.com>
2018-08-29 20:49:06 -06:00
DL6ER
1813c25117
If config file was backed up: Print info message
...
Signed-off-by: DL6ER <dl6er@dl6er.de>
2018-08-21 13:07:23 +02:00
Mcat12
5d0d7336ff
Echo with newline when setting privacy level
...
Signed-off-by: Mcat12 <newtoncat12@yahoo.com>
2018-08-20 20:21:03 -04:00
Mcat12
6a26a05dbf
Fix privacy level whiptail option format
...
Signed-off-by: Mcat12 <newtoncat12@yahoo.com>
2018-08-20 19:40:43 -04:00
Mcat12
4aafa8cf47
Set the FTL privacy level during install
...
Signed-off-by: Mcat12 <newtoncat12@yahoo.com>
2018-08-20 19:20:29 -04:00
DL6ER
28c6b1393f
Backup existing /etc/dnsmasq.conf if present and ensure that /etc/dnsmasq.conf contains only "conf-dir=/etc/dnsmasq.d"
...
Signed-off-by: DL6ER <dl6er@dl6er.de>
2018-08-20 22:52:22 +02:00
Realtebo
0d1b3cee4f
Enable FTL service before starting it
...
Signed-off-by: Realtebo <mirkotebaldi@yahoo.it>
2018-08-16 17:52:47 +02:00
Mirko Tebaldi
476fecbcf5
Fixed typos as suggestes
...
Signed-off-by: Realtebo <mirkotebaldi@yahoo.it>
2018-08-14 15:04:42 +02:00
Mirko Tebaldi
327b58fa03
Merge pull request #1 from pi-hole/development
...
Merge with current main development branch
2018-08-14 14:55:18 +02:00
DL6ER
d3eea9404d
Merge pull request #2331 from pi-hole/tweak/improve_FTL_download_errormsg
...
Improve error message when downloading FTL failed
2018-08-14 13:20:47 +02:00
Realtbo
d9195970b7
Create adlist file while running unattended setup
...
Signed-off-by: Realtebo <mirkotebaldi@yahoo.it>
2018-08-12 23:21:01 +02:00
Mark Drobnak
ef8aaba014
Merge pull request #2320 from TronPaul/fix/no-tty
...
set noninteractive during unattended install
2018-08-08 19:28:12 -04:00
DL6ER
f5c3dc5d9d
Improve download error message that is shown when downloading or verifying the binary failed
...
Signed-off-by: DL6ER <dl6er@dl6er.de>
2018-08-07 16:51:58 +02:00
Mcat12
e01eea8ba8
Remove PowerPC from FTL binaries
...
It is no longer built, and may cause 404 errors if it attempts to
download the binary.
Signed-off-by: Mcat12 <newtoncat12@yahoo.com>
2018-08-06 21:15:16 -04:00
Dan Schaper
5b628a4c77
Merge branch 'development' into release/v4.0
2018-08-05 21:16:19 -07:00
Mark McGuire
0081a7ca92
set noninteractive during unattended install
...
Signed-off-by: Mark McGuire <mark.b.mcg@gmail.com>
2018-08-05 10:12:43 -05:00
Dan Schaper
993beab3b7
Changed wording.
...
Signed-off-by: Dan Schaper <dan.schaper@pi-hole.net>
2018-07-31 11:14:26 -07:00
Dan Schaper
06875f2cc9
Merge branch 'release/v4.0' into fix/parse_pihole-FTL.conf
2018-07-30 14:32:29 -07:00
Dan Schaper
448fc7231c
Installed to /etc/pihole
as PI_HOLE_CONFIG_DIR variable.
...
Signed-off-by: Dan Schaper <dan.schaper@pi-hole.net>
2018-07-30 14:26:07 -07:00
Dan Schaper
d0d030bafc
Moved file creation to proper function. Included bash variables for file
...
location. Set to pihole:pihole ownership with 644 permissions.
Signed-off-by: Dan Schaper <dan.schaper@pi-hole.net>
2018-07-30 14:02:18 -07:00
Dan Schaper
833131e15f
Merge pull request #2315 from pi-hole/fix/regex-file-ownership
...
Allow PHP to edit the regex file if web is installed
2018-07-30 06:36:20 -07:00
Dan Schaper
fb2810557a
Allow web user group to access regex.list
...
Signed-off-by: Dan Schaper <dan.schaper@pi-hole.net>
2018-07-29 16:09:03 -07:00
Mcat12
57af0ba0a4
Use install
to make the regex file
...
Signed-off-by: Mcat12 <newtoncat12@yahoo.com>
2018-07-29 18:26:00 -04:00
Dan Schaper
17c1e64f7e
Moved FTL configuration copy in to scripts copy function.
...
Signed-off-by: Dan Schaper <dan.schaper@pi-hole.net>
2018-07-29 09:06:51 -07:00
Dan Schaper
af13ceac24
Touch file as ${USER} instead of copying template.
...
Signed-off-by: Dan Schaper <dan.schaper@pi-hole.net>
2018-07-29 08:42:59 -07:00
Mcat12
a55cc55338
Only touch
the regex file if it doesn't already exist
...
The other permission calls will always be run so that the file is in the
expected state after install and repair.
Signed-off-by: Mcat12 <newtoncat12@yahoo.com>
2018-07-28 23:07:35 -04:00
Dan Schaper
b2fb3fd35a
Merge pull request #2310 from pi-hole/feature/pihole-FTL.conf
...
Include template pihole-FTL.conf
2018-07-28 20:04:39 -07:00
Mcat12
1a8d5fb4a9
Allow PHP to edit the regex file if installed
...
Fixes permissions error on the web interface when modifying the regex.
Signed-off-by: Mcat12 <newtoncat12@yahoo.com>
2018-07-28 21:57:39 -04:00
Mcat12
c73b5456eb
Fix "which" error leaking
...
Signed-off-by: Mcat12 <newtoncat12@yahoo.com>
2018-07-28 21:12:05 -04:00
Mcat12
3d87398721
Fix check_service_active
leaking error output
...
Signed-off-by: Mcat12 <newtoncat12@yahoo.com>
2018-07-28 20:50:04 -04:00
Mark Drobnak
47b56d6123
Fix wrong git command flag
...
I could not find documentation on a `--head` flag, but there is a `--heads` flag which does the same thing.
Signed-off-by: Mcat12 <newtoncat12@yahoo.com>
2018-07-27 23:27:44 -04:00
Dan Schaper
512d2dd5f8
Source git repo and not /opt location.
...
Signed-off-by: Dan Schaper <dan.schaper@pi-hole.net>
2018-07-27 15:47:20 -07:00
Dan Schaper
ad20d5ac1c
Remove -t SOURCE and DIRECTORY reversal flag on install.
...
Signed-off-by: Dan Schaper <dan.schaper@pi-hole.net>
2018-07-27 15:39:37 -07:00
Dan Schaper
b79ff05e29
Move template files to own subdir. Include pihole-FTL.conf in templates.
...
Signed-off-by: Dan Schaper <dan.schaper@pi-hole.net>
2018-07-27 15:21:25 -07:00
Borats Nolan
32b50f8188
Change the word "folder" to "directory" since the pi-hole is intended to run on rpi with Linux on it.
...
Signed-off-by: Borats Nolan <borats@i.dont.use.email>
2018-07-28 02:35:39 +10:00
Dan Schaper
32cf94fc74
Merge pull request #2297 from pi-hole/bugfix/locales
...
Fixed locale issue, do not parse for string.
2018-07-26 16:44:52 -07:00
Adam Warner
9b1356ad01
Revert #2282
...
Signed-off-by: Adam Warner <adamw@rner.email>
2018-07-27 00:27:06 +01:00
Peter Robinson
45521b377a
Use ip route rather than old net-tools route in chronometer.sh
...
The only use of net-tools is the use of route in chronometer.sh so
instead use the same method as used in piholeDebug.sh to get the
default gateway so there's no need to depend on net-tools anylonger.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
2018-07-26 17:46:51 +01:00
Dan Schaper
46a366635c
Fixed locale issue, do not parse for string.
...
Signed-off-by: Dan Schaper <dan.schaper@pi-hole.net>
2018-07-26 05:30:05 -07:00
Dan Schaper
1877128fc4
Removes empty comment lines in basic-install.sh
...
Signed-off-by: Dan Schaper <dan.schaper@pi-hole.net>
2018-07-20 10:38:13 -07:00
Mark Drobnak
9cd674b528
Merge pull request #2282 from RamSet/tweak/Port53
...
Updated port 53 check #2
2018-07-18 22:56:33 -04:00
RamSet
5aea7eb860
corrected function indentation
...
Signed-off-by: RamSet <RamSet@gmail.com>
2018-07-17 20:46:18 -06:00
Mark Drobnak
ec30df2020
Merge pull request #2277 from bcambl/centos_fedora_fixes
...
Installer fixes for Fedora & CentOS
2018-07-17 22:06:25 -04:00
RamSet
bb33427c79
fixed parsing error
...
Signed-off-by: RamSet <RamSet@gmail.com>
2018-07-17 18:09:25 -06:00
RamSet
28a16cebda
Addressed lint errors.
...
Signed-off-by: RamSet <RamSet@gmail.com>
2018-07-17 18:06:32 -06:00
RamSet
49c79405bc
changed flag and variable name
...
Signed-off-by: RamSet <RamSet@gmail.com>
2018-07-17 18:04:50 -06:00
RamSet
3098f32a07
Fixed intentation and corrected comments.
...
Signed-off-by: RamSet <RamSet@gmail.com>
2018-07-17 17:56:13 -06:00
Dan Schaper
69e06d89ff
Added missing for sourced file.
...
Signed-off-by: Dan Schaper <dan.schaper@pi-hole.net>
2018-07-16 22:36:58 -07:00
RamSet
56b04017e7
Port 53 check updated with 4 spaces.
...
Signed-off-by: RamSet <RamSet@gmail.com>
2018-07-16 11:29:12 -06:00
bcambl
fa9ecbdb81
add php-json to Fedora web deps
...
Signed-off-by: bcambl <blayne@blaynecampbell.com>
2018-07-15 15:41:04 -06:00
bcambl
2bf6b29b8f
trigger an install/upgrade of PHP after enabling the Remi repository
...
Signed-off-by: bcambl <blayne@blaynecampbell.com>
2018-07-15 15:40:44 -06:00
Dan Schaper
9dba9fb366
Convert multiline echos to individual echo statements so they don't lead with different amounts of space.
...
Signed-off-by: Dan Schaper <dan.schaper@pihole.net>
2018-07-06 21:29:20 -07:00
Dan Schaper
a323b126e5
Finished space conversion
...
Signed-off-by: Dan Schaper <dan.schaper@pihole.net>
2018-07-05 23:47:55 -07:00
Mark Drobnak
0651f1bcd4
Merge pull request #2220 from rrobgill/installedphpcheck
...
Bugfix - Check version of installed php
2018-06-08 23:31:40 -04:00
Rob Gill
11f0ade921
comments
...
Signed-off-by: Rob Gill <rrobgill@protonmail.com>
2018-06-09 13:18:36 +10:00
Rob Gill
6381bdbf33
don't use major.minor for PHP 5
...
Signed-off-by: <rrobgill@protonmail.com>
2018-06-09 11:35:30 +10:00
Mcat12
4a75566a3b
Merge remote-tracking branch 'origin/development' into tweak/32bitOS_on_64bitCPU
2018-06-08 20:20:57 -04:00
Rob Gill
52aa52c3b1
remove duplicate declaration
...
Signed-off-by: Rob Gill <rrobgill@protonmail.com>
2018-06-07 08:19:26 +10:00
Mark Drobnak
6689e00e6a
Merge pull request #2212 from rrobgill/man-pages
...
Man page for pilhole-FTL
2018-06-05 21:33:54 -04:00
Rob Gill
a3569d88c9
Version strings & bash.
...
Fixed up the version checking. Thanks for your help @dschaper.
No longer uses the version string as returned, but uses the major and minor version numbers extracted from it, against the minimum of 5.5.
Tested against real install of php 7.0, (and the version check logic separately tested against a variety of artificial version numbers, of multiple digits for both major and minor version. - Lesson learned, I'm never trusting bash again)
Signed-off-by: Rob Gill <rrobgill@protonmail.com>
2018-06-05 21:42:42 +10:00
Adam Warner
f2f6b6ede9
stickler complaints
...
Signed-off-by: Adam Warner <adamw@rner.email>
2018-06-05 09:29:03 +01:00
Adam Warner
7f81cfd45a
Stats can still be generated without logging, no need for this sentence
...
Signed-off-by: Adam Warner <adamw@rner.email>
2018-06-05 09:09:35 +01:00
Rob Gill
13b8e1a2ae
quotes.
...
Signed-off-by: Rob Gill <rrobgill@protonmail.com>
2018-06-05 15:09:07 +10:00
Rob Gill
36dbdf955d
Update basic-install.sh
...
Signed-off-by: Rob Gill <rrobgill@protonmail.com>
2018-06-05 14:48:24 +10:00
Rob Gill
714b6c98ef
codacy
...
Signed-off-by: Rob Gill <rrobgill@protonmail.com>
2018-06-05 14:45:01 +10:00
Rob Gill
7181d7ae6a
Left that fi
...
Signed-off-by: Rob Gill <rrobgill@protonmail.com>
2018-06-05 14:30:18 +10:00
Rob Gill
9422d57283
Check version of installed php
...
Signed-off-by: Rob Gill <rrobgill@protonmail.com>
2018-06-05 12:08:27 +10:00
Dan Schaper
feba4da0b8
Merge pull request #2161 from pi-hole/centos_remi-php7
...
CentOS install re-worked to provide PHP7 via Remi Repository
2018-06-03 10:54:32 -07:00
Rob Gill
ed7ebfd58d
man page for pihole-FTL
...
Signed-off-by: Rob Gill <rrobgill@protonmail.com>
2018-06-03 22:15:26 +10:00
Mark Drobnak
23fbb3cf22
Merge pull request #2205 from rrobgill/manual-page
...
Manual page
2018-06-02 21:11:21 -04:00
Rob Gill
9970f3786f
Requested change
...
Signed-off-by: Rob Gill <rrobgill@protonmail.com>
2018-06-02 14:14:55 +10:00
Rob Gill
ef65bac79b
change status from INFO to CROSS
...
Signed-Off-By: Rob Gill <rrobgill@protonmail.com>
2018-06-02 11:27:35 +10:00
Rob Gill
c0837c726f
blank space
...
Signed-off-by: Rob Gill <rrobgill@protonmail.com>
2018-06-02 11:18:13 +10:00
Rob Gill
ce5429aba7
stickler
...
Signed-off-by: Rob Gill <rrobgill@protonmail.com>
2018-06-02 11:02:06 +10:00
Rob Gill
aa191e9202
Update basic-install.sh
...
Signed-off-by: Rob Gill <rrobgill@protonmail.com>
2018-06-02 10:46:07 +10:00
Rob Gill
a8f0283e93
Update basic-install.sh
...
This hands checking of lighttpd's status over to the existing check_service_active() function.
All other checks of service status within the install script are handled by this function.
Use of existing function:
Avoids duplication of service detection logic.
Uses return code to determine status, thereby avoids parsing text to determine status, and reliance on English language locale to determine activity, (which may also be broken on some systems (# 2204)
Signed-off-by: Rob Gill <rrobgill@protonmail.com>
2018-06-02 10:11:11 +10:00
Rob Gill
a8103ca22d
Manual page install function
...
Function to install man page.
Verifies that man pages are installed, and correct directory for the pihole manpage is present.
Copies file, and runs man-db to update man page database.
Signed-off-by: Rob Gill <rrobgill@protonmail.com>
2018-06-02 09:45:04 +10:00