diff --git a/gravity.sh b/gravity.sh index a2f5d978..c1295852 100755 --- a/gravity.sh +++ b/gravity.sh @@ -16,7 +16,6 @@ source "${coltable}" basename="pihole" PIHOLE_COMMAND="/usr/local/bin/${basename}" -WHITELIST_COMMAND="${PIHOLE_COMMAND} -w" piholeDir="/etc/${basename}" piholeRepo="/etc/.${basename}" @@ -51,87 +50,99 @@ if [[ -f "${setupVars}" ]];then # Remove CIDR mask from IPv4/6 addresses IPV4_ADDRESS="${IPV4_ADDRESS%/*}" IPV6_ADDRESS="${IPV6_ADDRESS%/*}" + + # Determine if IPv4/6 addresses exist + if [[ -z "${IPV4_ADDRESS}" ]] && [[ -z "${IPV6_ADDRESS}" ]]; then + echo -e " ${COL_LIGHT_RED}No IP addresses found! Please run 'pihole -r' to reconfigure${COL_NC}" + exit 1 + fi else echo -e " ${COL_LIGHT_RED}Installation Failure: ${setupVars} does not exist! ${COL_NC} Please run 'pihole -r', and choose the 'reconfigure' option to fix." exit 1 fi -# Warn users still using pihole.conf that it no longer has any effect +# Determine if superseded pihole.conf exists if [[ -r "${piholeDir}/pihole.conf" ]]; then echo -e " ${COL_LIGHT_RED}Ignoring overrides specified within pihole.conf! ${COL_NC}" fi -# Determine if DNS resolution is available before proceeding with retrieving blocklists +# Determine if DNS resolution is available before proceeding gravity_DNSLookup() { - local lookupDomain plural + local lookupDomain="pi.hole" plural="" - # Determine which domain should be resolved - # "pi.hole" is not always available (e.g: new install), but FTL will not log it - if [[ -e "${localList}" ]]; then - lookupDomain="pi.hole" - else + # Determine if $localList does not exist + if [[ ! -e "${localList}" ]]; then lookupDomain="raw.githubusercontent.com" fi - # Determine if domain can be resolved - if ! timeout 5 nslookup "${lookupDomain}" &> /dev/null; then - if [[ -n "${secs}" ]]; then - echo -e "${OVER} ${CROSS} DNS resolution is still unavailable, cancelling" - exit 1 - fi - - # Determine error output message - if pidof dnsmasq &> /dev/null; then - echo -e " ${CROSS} DNS resolution is temporarily unavailable" - else - echo -e " ${CROSS} DNS service is not running" - "${PIHOLE_COMMAND}" restartdns + # Determine if $lookupDomain is resolvable + if timeout 5 getent hosts "${lookupDomain}" &> /dev/null; then + # Print confirmation of resolvability if it had previously failed + if [[ -n "${secs:-}" ]]; then + echo -e "${OVER} ${TICK} DNS resolution is now available\\n" fi + return 0 + elif [[ -n "${secs:-}" ]]; then + echo -e "${OVER} ${CROSS} DNS resolution is still unavailable, cancelling" + exit 1 + fi - # Give time for DNS server to be resolvable - secs="30" - while [[ "${secs}" -ne 0 ]]; do - plural=; [[ "${secs}" -ne 1 ]] && plural="s" - echo -ne "${OVER} ${INFO} Waiting $secs second${plural} before continuing..." - sleep 1 - : $((secs--)) - done - - # Try again - gravity_DNSLookup - elif [[ -n "${secs}" ]]; then - # Print confirmation of resolvability if it had previously failed - echo -e "${OVER} ${TICK} DNS resolution is now available\\n" + # Determine error output message + if pidof dnsmasq &> /dev/null; then + echo -e " ${CROSS} DNS resolution is currently unavailable" + else + echo -e " ${CROSS} DNS service is not running" + "${PIHOLE_COMMAND}" restartdns fi + + # Give time for DNS server to be resolvable + secs="30" + while [[ "${secs}" -ne 0 ]]; do + [[ "${secs}" -ne 1 ]] && plural="s" + echo -ne "${OVER} ${INFO} Waiting $secs second${plural} before continuing..." + sleep 1 + : $((secs--)) + done + + # Try again + gravity_DNSLookup } # Retrieve blocklist URLs and parse domains from adlists.list gravity_Collapse() { - echo -e " ${INFO} Neutrino emissions detected..." + echo -e " ${INFO} ${COL_BOLD}Neutrino emissions detected${COL_NC}..." - # Handle "adlists.list" and "adlists.default" files - if [[ -f "${adListDefault}" ]] && [[ -f "${adListFile}" ]]; then + # Determine if adlists file needs handling + if [[ ! -f "${adListFile}" ]]; then + # Create "adlists.list" by copying "adlists.default" from internal core repo + cp "${adListRepoDefault}" "${adListFile}" 2> /dev/null || \ + echo -e " ${CROSS} Unable to copy ${adListFile##*/} from ${piholeRepo}" + elif [[ -f "${adListDefault}" ]] && [[ -f "${adListFile}" ]]; then # Remove superceded $adListDefault file rm "${adListDefault}" 2> /dev/null || \ echo -e " ${CROSS} Unable to remove ${adListDefault}" - elif [[ ! -f "${adListFile}" ]]; then - # Create "adlists.list" by copying "adlists.default" from internal Pi-hole repo - cp "${adListRepoDefault}" "${adListFile}" 2> /dev/null || \ - echo -e " ${CROSS} Unable to copy ${adListFile##*/} from ${piholeRepo}" fi local str="Pulling blocklist source list into range" echo -ne " ${INFO} ${str}..." # Retrieve source URLs from $adListFile - # Awk Logic: Remove comments (#@;![), CR (windows) line endings and empty lines - mapfile -t sources < <(awk '!/^[#@;!\[]/ {gsub(/\r$/, "", $0); if ($1) { print $1 } }' "${adListFile}" 2> /dev/null) + mapfile -t sources <<< $( + # Logic: Remove comments (#@;![) + awk '!/^[#@;!\[]/ { + # Remove windows CR line endings + gsub(/\r$/, "", $0) + # Print non-empty line + if ($1) { print $1 } + }' "${adListFile}" 2> /dev/null + ) # Parse source domains from $sources - # Awk Logic: Split by folder/port, remove URL protocol & optional username:password@ - mapfile -t sourceDomains < <( + mapfile -t sourceDomains <<< $( + # Logic: Split by folder/port awk -F '[/:]' '{ + # Remove URL protocol & optional username:password@ gsub(/(.*:\/\/|.*:.*@)/, "", $0) print $1 }' <<< "$(printf '%s\n' "${sources[@]}")" 2> /dev/null @@ -151,7 +162,7 @@ gravity_Supernova() { echo "" - # Loop through $sources to download each one + # Loop through $sources and download each one for ((i = 0; i < "${#sources[@]}"; i++)); do url="${sources[$i]}" domain="${sourceDomains[$i]}" @@ -170,11 +181,8 @@ gravity_Supernova() { esac if [[ "${skipDownload}" == false ]]; then - str="Target: ${domain} (${url##*/})" - echo -e " ${INFO} ${str}" - - gravity_Pull "${url}" "${cmd_ext}" "${agent}" "${str}" - + echo -e " ${INFO} Target: ${domain} (${url##*/})" + gravity_Pull "${url}" "${cmd_ext}" "${agent}" echo "" fi done @@ -182,19 +190,15 @@ gravity_Supernova() { # Download specified URL and perform checks on HTTP status and file content gravity_Pull() { - local url cmd_ext agent heisenbergCompensator patternBuffer str httpCode success - - url="${1}" - cmd_ext="${2}" - agent="${3}" + local url="${1}" cmd_ext="${2}" agent="${3}" heisenbergCompensator="" patternBuffer str httpCode success="" - # Store downloaded content to temp file instead of RAM - patternBuffer=$(mktemp) + # Create temp file to store content on disk instead of RAM + patternBuffer=$(mktemp -p "/tmp" --suffix=".phgpb") - heisenbergCompensator="" + # Determine if $saveLocation has read permission if [[ -r "${saveLocation}" ]]; then - # Make curl determine if a remote file has been modified since last retrieval - # Uses "Last-Modified" header, which certain web servers do not provide (e.g: raw github links) + # Have curl determine if a remote file has been modified since last retrieval + # Uses "Last-Modified" header, which certain web servers do not provide (e.g: raw github urls) heisenbergCompensator="-z ${saveLocation}" fi @@ -205,21 +209,21 @@ gravity_Pull() { # Determine "Status:" output based on HTTP response case "${httpCode}" in - "200") echo -e "${OVER} ${TICK} ${str} Retrieval successful"; success="true";; - "304") echo -e "${OVER} ${TICK} ${str} No changes detected"; success="true";; - "000") echo -e "${OVER} ${CROSS} ${str} Connection Refused"; success="false";; - "403") echo -e "${OVER} ${CROSS} ${str} Forbidden"; success="false";; - "404") echo -e "${OVER} ${CROSS} ${str} Not found"; success="false";; - "408") echo -e "${OVER} ${CROSS} ${str} Time-out"; success="false";; - "451") echo -e "${OVER} ${CROSS} ${str} Unavailable For Legal Reasons"; success="false";; - "521") echo -e "${OVER} ${CROSS} ${str} Web Server Is Down (Cloudflare)"; success="false";; - "522") echo -e "${OVER} ${CROSS} ${str} Connection Timed Out (Cloudflare)"; success="false";; - "500") echo -e "${OVER} ${CROSS} ${str} Internal Server Error"; success="false";; - * ) echo -e "${OVER} ${CROSS} ${str} ${httpCode}"; success="false";; + "200") echo -e "${OVER} ${TICK} ${str} Retrieval successful"; success=true;; + "304") echo -e "${OVER} ${TICK} ${str} No changes detected"; success=true;; + "000") echo -e "${OVER} ${CROSS} ${str} Connection Refused";; + "403") echo -e "${OVER} ${CROSS} ${str} Forbidden";; + "404") echo -e "${OVER} ${CROSS} ${str} Not found";; + "408") echo -e "${OVER} ${CROSS} ${str} Time-out";; + "451") echo -e "${OVER} ${CROSS} ${str} Unavailable For Legal Reasons";; + "500") echo -e "${OVER} ${CROSS} ${str} Internal Server Error";; + "521") echo -e "${OVER} ${CROSS} ${str} Web Server Is Down (Cloudflare)";; + "522") echo -e "${OVER} ${CROSS} ${str} Connection Timed Out (Cloudflare)";; + * ) echo -e "${OVER} ${CROSS} ${str} ${httpCode}";; esac # Determine if the blocklist was downloaded and saved correctly - if [[ "${success}" == "true" ]]; then + if [[ "${success}" == true ]]; then if [[ "${httpCode}" == "304" ]]; then : # Do not attempt to re-parse file # Check if $patternbuffer is a non-zero length file @@ -231,46 +235,40 @@ gravity_Pull() { echo -e " ${INFO} Received empty file: ${COL_LIGHT_GREEN}using previously cached list${COL_NC}" fi else - # Determine if cached list exists + # Determine if cached list has read permission if [[ -r "${saveLocation}" ]]; then echo -e " ${CROSS} List download failed: ${COL_LIGHT_GREEN}using previously cached list${COL_NC}" else echo -e " ${CROSS} List download failed: ${COL_LIGHT_RED}no cached list available${COL_NC}" fi fi - - # Delete temp file if it has not been moved - if [[ -f "${patternBuffer}" ]]; then - rm "${patternBuffer}" 2> /dev/null || \ - echo -e " ${CROSS} Unable to remove ${patternBuffer}" - fi } -# Parse non-standard source files into domains-only format +# Parse source files into domains format gravity_ParseFileIntoDomains() { local source="${1}" destination="${2}" commentPattern firstLine abpFilter - # Determine how to parse source file + # Determine if we are parsing a consolidated list if [[ "${source}" == "${piholeDir}/${matterAndLight}" ]]; then - # Consolidated list parsing: Remove comments and hosts IP's - # Define symbols used as comments: #;@![/ commentPattern="[#;@![\\/]" - # Awk Logic: Process lines which do not begin with comments + # Parse Domains/Hosts files by removing comments & host IPs + # Logic: Ignore lines which begin with comments awk '!/^'"${commentPattern}"'/ { - # If there are multiple words seperated by space - if (NF>1) { + # Determine if there are multiple words seperated by a space + if(NF>1) { # Remove comments (including prefixed spaces/tabs) - if ($0 ~ /'"${commentPattern}"'/) { gsub("( |\t)'"${commentPattern}"'.*", "", $0) } - # Print consecutive domains - if ($3) { + if($0 ~ /'"${commentPattern}"'/) { gsub("( |\t)'"${commentPattern}"'.*", "", $0) } + # Determine if there are aliased domains + if($3) { + # Remove IP address $1="" # Remove space which is left in $0 when removing $1 gsub("^ ", "", $0) print $0 - # Print single domain - } else if ($2) { + } else if($2) { + # Print single domain without IP print $2 } # If there are no words seperated by space @@ -278,59 +276,60 @@ gravity_ParseFileIntoDomains() { print $1 } }' "${source}" 2> /dev/null > "${destination}" - else - # Individual file parsing: Keep comments, while parsing domains from each line - read -r firstLine < "${source}" - - # Determine how to parse individual source file formats - # Lists may not capitalise the first line correctly, so compare strings against lower case - if [[ "${firstLine,,}" =~ (adblock|ublock|!checksum) ]]; then - # Awk Logic: Parse Adblock domains & comments: https://adblockplus.org/filter-cheatsheet - abpFilter="/^(\\[|!)|^(\\|\\|.*\\^)/" - awk ''"${abpFilter}"' { - # Remove valid adblock type options - gsub(/~?(important|third-party|popup|subdocument|websocket),?/, "", $0) - # Remove starting domain name anchor "||" and ending seperator "^$" ($ optional) - gsub(/(\|\||\^\$?$)/, "", $0) - # Remove lines which are only IPv4 addresses or contain "^/*" - if ($0 ~ /(^[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+$|[\\^\/\*])/) { $0="" } - if ($0) { print $0 } - }' "${source}" 2> /dev/null > "${destination}" - # Parse URL list if source file contains http:// or IPv4 - elif grep -q -E "^(https?://|([0-9]{1,3}\\.){3}[0-9]{1,3}$)" "${source}" &> /dev/null; then - awk '{ - # Remove URL protocol, optional "username:password@", and ":?/;" - if ($0 ~ /[:?\/;]/) { gsub(/(^.*:\/\/(.*:.*@)?|[:?\/;].*)/, "", $0) } - # Remove lines which are only IPv4 addresses - if ($0 ~ /^[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+$/) { $0="" } - if ($0) { print $0 } - }' "${source}" 2> /dev/null > "${destination}" + return 0 + fi + + # Individual file parsing: Keep comments, while parsing domains from each line + # We keep comments to respect the list maintainer's licensing + read -r firstLine < "${source}" + + # Determine how to parse individual source file formats + if [[ "${firstLine,,}" =~ (adblock|ublock|^!) ]]; then + # Compare $firstLine against lower case words found in Adblock lists + + # Define symbols used as comments: [! + # "||.*^" includes the "Example 2" domains we can extract + # https://adblockplus.org/filter-cheatsheet + abpFilter="/^(\\[|!)|^(\\|\\|.*\\^)/" + + # Parse Adblock lists by extracting "Example 2" domains + # Logic: Ignore lines which do not include comments or domain name anchor + awk ''"${abpFilter}"' { + # Remove valid adblock type options + gsub(/~?(important|third-party|popup|subdocument|websocket),?/, "", $0) + # Remove starting domain name anchor "||" and ending seperator "^$" ($ optional) + gsub(/(\|\||\^\$?$)/, "", $0) + # Remove lines which are only IPv4 addresses or contain "^/*" + if($0 ~ /(^[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+$|[\\^\/\*])/) { $0="" } + if($0) { print $0 } + }' "${source}" 2> /dev/null > "${destination}" + elif grep -q "^address=/" "${source}" &> /dev/null; then # Parse Dnsmasq format lists - elif grep -q "^address=/" "${source}" &> /dev/null; then - awk -F/ '{ - # Print comments - if ($0 ~ "#") { - print $0 - # Print domains - } else if ($2) { - print $2 - } - }' "${source}" 2> /dev/null > "${destination}" - else - # Keep hosts/domains file in same format as it was downloaded - output=$( { mv "${source}" "${destination}"; } 2>&1 ) - status="$?" - - if [[ "${status}" -ne 0 ]]; then - echo -e " ${CROSS} Unable to move tmp file to ${piholeDir} - ${output}" - gravity_Cleanup "error" - fi + echo -e " ${CROSS} ${COL_BOLD}dnsmasq${COL_NC} format lists are not supported" + elif grep -q -E "^(https?://|www\\.)" "${source}" &> /dev/null; then + # Parse URL list if source file contains "http://" or "www." + # Scanning for "^IPv4$" is too slow with large (1M) lists on low-end hardware + + awk '{ + # Remove URL protocol, optional "username:password@", and ":?/;" + if ($0 ~ /[:?\/;]/) { gsub(/(^.*:\/\/(.*:.*@)?|[:?\/;].*)/, "", $0) } + # Remove lines which are only IPv4 addresses + if ($0 ~ /^[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+$/) { $0="" } + if ($0) { print $0 } + }' "${source}" 2> /dev/null > "${destination}" + else + # Default: Keep hosts/domains file in same format as it was downloaded + output=$( { mv "${source}" "${destination}"; } 2>&1 ) + + if [[ ! -e "${destination}" ]]; then + echo -e " ${CROSS} Unable to move tmp file to ${piholeDir} + ${output}" + gravity_Cleanup "error" fi fi } -# Create unfiltered "Matter and Light" consolidated list +# Create (unfiltered) "Matter and Light" consolidated list gravity_Schwarzschild() { local str lastLine @@ -340,22 +339,25 @@ gravity_Schwarzschild() { # Empty $matterAndLight if it already exists, otherwise, create it : > "${piholeDir}/${matterAndLight}" + # Loop through each *.domains file for i in "${activeDomains[@]}"; do - # Only assimilate list if it is available (download might have failed permanently) + # Determine if file has read permissions, as download might have failed if [[ -r "${i}" ]]; then - # Compile all blacklisted domains into one file and remove CRs + # Remove windows CRs from file, and append into $matterAndLight tr -d '\r' < "${i}" >> "${piholeDir}/${matterAndLight}" - # Ensure each source blocklist has a final newline + # Ensure that the first line of a new list is on a new line lastLine=$(tail -1 "${piholeDir}/${matterAndLight}") - [[ "${#lastLine}" -gt 0 ]] && echo "" >> "${piholeDir}/${matterAndLight}" + if [[ "${#lastLine}" -gt 0 ]]; then + echo "" >> "${piholeDir}/${matterAndLight}" + fi fi done echo -e "${OVER} ${TICK} ${str}" } -# Parse unfiltered consolidated blocklist into filtered domains-only format +# Parse consolidated list into (filtered, unique) domains-only format gravity_Filter() { local str num @@ -365,77 +367,67 @@ gravity_Filter() { # Parse into hosts file gravity_ParseFileIntoDomains "${piholeDir}/${matterAndLight}" "${piholeDir}/${parsedMatter}" - # Format file line count as currency + # Format $parsedMatter line total as currency num=$(printf "%'.0f" "$(wc -l < "${piholeDir}/${parsedMatter}")") echo -e "${OVER} ${TICK} ${str} ${INFO} ${COL_LIGHT_BLUE}${num}${COL_NC} domains being pulled in by gravity" - gravity_Unique -} - -# Sort and remove duplicate blacklisted domains -gravity_Unique() { - local str num - str="Removing duplicate domains" echo -ne " ${INFO} ${str}..." sort -u "${piholeDir}/${parsedMatter}" > "${piholeDir}/${preEventHorizon}" echo -e "${OVER} ${TICK} ${str}" - # Format file line count as currency + # Format $preEventHorizon line total as currency num=$(printf "%'.0f" "$(wc -l < "${piholeDir}/${preEventHorizon}")") echo -e " ${INFO} ${COL_LIGHT_BLUE}${num}${COL_NC} unique domains trapped in the Event Horizon" } -# Whitelist blocklist domain sources +# Whitelist unique blocklist domain sources gravity_WhitelistBLD() { - local plural str uniqDomains + local plural="" str uniqDomains echo "" - plural=; [[ "${#sources[*]}" != "1" ]] && plural="s" - str="Adding blocklist source${plural} to the whitelist" + [[ "${#sources[@]}" -ne 1 ]] && plural="s" + str="Adding blocklist domain source${plural} to the whitelist" echo -ne " ${INFO} ${str}..." # Create array of unique $sourceDomains mapfile -t uniqDomains <<< "$(awk '{ if(!a[$1]++) { print $1 } }' <<< "$(printf '%s\n' "${sourceDomains[@]}")")" - ${WHITELIST_COMMAND} -nr -q "${uniqDomains[*]}" > /dev/null + # Whitelist $uniqDomains + "${PIHOLE_COMMAND}" -w -nr -q "${uniqDomains[*]}" &> /dev/null echo -e "${OVER} ${TICK} ${str}" } # Whitelist user-defined domains gravity_Whitelist() { - local plural str num - - # Test existence of whitelist.txt - if [[ -f "${whitelistFile}" ]]; then - # Remove anything in whitelist.txt from the Event Horizon - num=$(wc -l < "${whitelistFile}") - plural=; [[ "${num}" -ne 1 ]] && plural="s" - str="Whitelisting ${num} domain${plural}" - echo -ne " ${INFO} ${str}..." + local num plural="" str - # Print everything from preEventHorizon into whitelistMatter EXCEPT domains in whitelist.txt - grep -F -x -v -f "${whitelistFile}" "${piholeDir}/${preEventHorizon}" > "${piholeDir}/${whitelistMatter}" - - echo -e "${OVER} ${TICK} ${str}" - else + if [[ ! -f "${whitelistFile}" ]]; then echo -e " ${INFO} Nothing to whitelist!" + return 0 fi + + num=$(wc -l < "${whitelistFile}") + [[ "${num}" -ne 1 ]] && plural="s" + str="Whitelisting ${num} domain${plural}" + echo -ne " ${INFO} ${str}..." + + # Print everything from preEventHorizon into whitelistMatter EXCEPT domains in $whitelistFile + grep -F -x -v -f "${whitelistFile}" "${piholeDir}/${preEventHorizon}" > "${piholeDir}/${whitelistMatter}" + + echo -e "${OVER} ${TICK} ${str}" } # Output count of blacklisted domains and wildcards gravity_ShowBlockCount() { - local num plural str + local num plural if [[ -f "${blacklistFile}" ]]; then num=$(printf "%'.0f" "$(wc -l < "${blacklistFile}")") plural=; [[ "${num}" -ne 1 ]] && plural="s" - str="Exact blocked domain${plural}: ${num}" - echo -e " ${INFO} ${str}" - else - echo -e " ${INFO} Nothing to blacklist!" + echo -e " ${INFO} Blacklisted ${num} domain${plural}" fi if [[ -f "${wildcardFile}" ]]; then @@ -445,47 +437,47 @@ gravity_ShowBlockCount() { num=$(( num/2 )) fi plural=; [[ "${num}" -ne 1 ]] && plural="s" - echo -e " ${INFO} Wildcard blocked domain${plural}: ${num}" - else - echo -e " ${INFO} No wildcards used!" + echo -e " ${INFO} Wildcard blocked ${num} domain${plural}" fi } # Parse list of domains into hosts format gravity_ParseDomainsIntoHosts() { - if [[ -n "${IPV4_ADDRESS}" ]] || [[ -n "${IPV6_ADDRESS}" ]]; then - # Awk Logic: Remove CR line endings and print IP before domain if IPv4/6 is used - awk -v ipv4addr="$IPV4_ADDRESS" -v ipv6addr="$IPV6_ADDRESS" '{ - sub(/\r$/, "") - if(ipv4addr) { print ipv4addr" "$0; } - if(ipv6addr) { print ipv6addr" "$0; } - }' >> "${2}" < "${1}" - else - echo -e "${OVER} ${CROSS} ${str}" - echo -e " ${COL_LIGHT_RED}No IP addresses found! Please run 'pihole -r' to reconfigure${COL_NC}\\n" - gravity_Cleanup "error" - fi + awk -v ipv4="$IPV4_ADDRESS" -v ipv6="$IPV6_ADDRESS" '{ + # Remove windows CR line endings + sub(/\r$/, "") + # Parse each line as "ipaddr domain" + if(ipv6 && ipv4) { + print ipv4" "$0"\n"ipv6" "$0 + } else if(!ipv6) { + print ipv4" "$0 + } else { + print ipv6" "$0 + } + }' >> "${2}" < "${1}" } # Create "localhost" entries into hosts format gravity_ParseLocalDomains() { local hostname - if [[ -f "/etc/hostname" ]]; then + if [[ -s "/etc/hostname" ]]; then hostname=$(< "/etc/hostname") elif command -v hostname &> /dev/null; then hostname=$(hostname -f) else echo -e " ${CROSS} Unable to determine fully qualified domain name of host" + return 0 fi echo -e "${hostname}\\npi.hole" > "${localList}.tmp" - # Copy the file over as /etc/pihole/local.list so dnsmasq can use it - rm "${localList}" 2> /dev/null || true + + # Empty $localList if it already exists, otherwise, create it + : > "${localList}" + gravity_ParseDomainsIntoHosts "${localList}.tmp" "${localList}" - rm "${localList}.tmp" 2> /dev/null || true - # Add additional local hosts provided by OpenVPN (if available) + # Add additional LAN hosts provided by OpenVPN (if available) if [[ -f "${VPNList}" ]]; then awk -F, '{printf $2"\t"$1"\n"}' "${VPNList}" >> "${localList}" fi @@ -512,12 +504,14 @@ gravity_ParseBlacklistDomains() { # Create user-added blacklist entries gravity_ParseUserDomains() { - if [[ -f "${blacklistFile}" ]]; then - gravity_ParseDomainsIntoHosts "${blacklistFile}" "${blackList}.tmp" - # Copy the file over as /etc/pihole/black.list so dnsmasq can use it - mv "${blackList}.tmp" "${blackList}" 2> /dev/null || \ - echo -e " ${CROSS} Unable to move ${blackList##*/}.tmp to ${piholeDir}" + if [[ ! -f "${blacklistFile}" ]]; then + return 0 fi + + gravity_ParseDomainsIntoHosts "${blacklistFile}" "${blackList}.tmp" + # Copy the file over as /etc/pihole/black.list so dnsmasq can use it + mv "${blackList}.tmp" "${blackList}" 2> /dev/null || \ + echo -e " ${CROSS} Unable to move ${blackList##*/}.tmp to ${piholeDir}" } # Trap Ctrl-C @@ -525,15 +519,17 @@ gravity_Trap() { trap '{ echo -e "\\n\\n ${INFO} ${COL_LIGHT_RED}User-abort detected${COL_NC}"; gravity_Cleanup "error"; }' INT } -# Clean up after Gravity +# Clean up after Gravity upon exit or cancellation gravity_Cleanup() { local error="${1:-}" str="Cleaning up stray matter" echo -ne " ${INFO} ${str}..." + # Delete tmp content generated by Gravity rm ${piholeDir}/pihole.*.txt 2> /dev/null rm ${piholeDir}/*.tmp 2> /dev/null + rm /tmp/*.phgpb 2> /dev/null # Remove any unused .domains files for file in ${piholeDir}/*.${domainsExtension}; do @@ -576,16 +572,14 @@ for var in "$@"; do "-sd" | "--skip-download" ) skipDownload=true;; "-b" | "--blacklist-only" ) listType="blacklist";; "-w" | "--whitelist-only" ) listType="whitelist";; - "-wild" | "--wildcard-only" ) listType="wildcard";; + "-wild" | "--wildcard-only" ) listType="wildcard"; dnsRestartType="restart";; esac done +# Trap Ctrl-C gravity_Trap -# Ensure dnsmasq is restarted when modifying wildcards -[[ "${listType}" == "wildcard" ]] && dnsRestart="restart" - -if [[ "${forceDelete}" == true ]]; then +if [[ "${forceDelete:-}" == true ]]; then str="Deleting exising list cache" echo -ne "${INFO} ${str}..." @@ -628,7 +622,7 @@ if [[ "${skipDownload}" == false ]] || [[ "${listType}" == "blacklist" ]]; then gravity_ParseUserDomains # Perform when downloading blocklists - if [[ ! "${listType}" == "blacklist" ]]; then + if [[ ! "${listType:-}" == "blacklist" ]]; then gravity_ParseLocalDomains gravity_ParseBlacklistDomains fi @@ -646,6 +640,6 @@ echo "" # Determine if DNS has been restarted by this instance of gravity if [[ -z "${dnsWasOffline:-}" ]]; then # Use "force-reload" when restarting dnsmasq for everything but Wildcards - "${PIHOLE_COMMAND}" restartdns "${dnsRestart:-force-reload}" + "${PIHOLE_COMMAND}" restartdns "${dnsRestartType:-force-reload}" fi "${PIHOLE_COMMAND}" status