From c0bc93c7c42725d4fa6849226ce1286efacac6ed Mon Sep 17 00:00:00 2001 From: bcambl Date: Fri, 9 Nov 2018 13:06:47 -0600 Subject: [PATCH] break dhcpcd and ifcfg network configurations into separate functions - move some logic from setStaticIPv4 to setDHCPCD - breakout ifcfg configuration into separate function which takes a config path as an argument - setStaticIPv4 now checks for configs and calls the appropriate function accordingly - add logic to check ifcfg file by _connection name_ if file is not found by _interface name_ Signed-off-by: bcambl --- automated install/basic-install.sh | 141 +++++++++++++++++------------ 1 file changed, 81 insertions(+), 60 deletions(-) diff --git a/automated install/basic-install.sh b/automated install/basic-install.sh index c49edda8..7377deed 100755 --- a/automated install/basic-install.sh +++ b/automated install/basic-install.sh @@ -776,77 +776,98 @@ It is also possible to use a DHCP reservation, but if you are going to do that, fi } -# dhcpcd is very annoying, +# configure networking via dhcpcd setDHCPCD() { - # but we can append these lines to dhcpcd.conf to enable a static IP - echo "interface ${PIHOLE_INTERFACE} - static ip_address=${IPV4_ADDRESS} - static routers=${IPv4gw} - static domain_name_servers=127.0.0.1" | tee -a /etc/dhcpcd.conf >/dev/null + # check if the IP is already in the file + if grep -q "${IPV4_ADDRESS}" /etc/dhcpcd.conf; then + printf " %b Static IP already configured\\n" "${INFO}" + # If it's not, + else + # we can append these lines to dhcpcd.conf to enable a static IP + echo "interface ${PIHOLE_INTERFACE} + static ip_address=${IPV4_ADDRESS} + static routers=${IPv4gw} + static domain_name_servers=127.0.0.1" | tee -a /etc/dhcpcd.conf >/dev/null + # Then use the ip command to immediately set the new address + ip addr replace dev "${PIHOLE_INTERFACE}" "${IPV4_ADDRESS}" + # Also give a warning that the user may need to reboot their system + printf " %b Set IP address to %s \\n You may need to restart after the install is complete\\n" "${TICK}" "${IPV4_ADDRESS%/*}" + fi +} + +# configure networking ifcfg-xxxx file found at /etc/sysconfig/network-scripts/ +# this function requires the full path of an ifcfg file passed as an argument +setIFCFG() { + # Local, named variables + local IFCFG_FILE + local IPADDR + local CIDR + IFCFG_FILE=$1 + printf -v IPADDR "%s" "${IPV4_ADDRESS%%/*}" + # check if the desired IP is already set + if grep -Eq "${IPADDR}(\\b|\\/)" "${IFCFG_FILE}"; then + printf " %b Static IP already configured\\n" "${INFO}" + # Otherwise, + else + # Put the IP in variables without the CIDR notation + printf -v CIDR "%s" "${IPV4_ADDRESS##*/}" + # Backup existing interface configuration: + cp "${IFCFG_FILE}" "${IFCFG_FILE}".pihole.orig + # Build Interface configuration file using the GLOBAL variables we have + { + echo "# Configured via Pi-hole installer" + echo "DEVICE=$PIHOLE_INTERFACE" + echo "BOOTPROTO=none" + echo "ONBOOT=yes" + echo "IPADDR=$IPADDR" + echo "PREFIX=$CIDR" + echo "GATEWAY=$IPv4gw" + echo "DNS1=$PIHOLE_DNS_1" + echo "DNS2=$PIHOLE_DNS_2" + echo "USERCTL=no" + }> "${IFCFG_FILE}" + # Use ip to immediately set the new address + ip addr replace dev "${PIHOLE_INTERFACE}" "${IPV4_ADDRESS}" + # If NetworkMangler command line interface exists and ready to mangle, + if is_command nmcli && nmcli general status &> /dev/null; then + # Tell NetworkManagler to read our new sysconfig file + nmcli con load "${IFCFG_FILE}" > /dev/null + fi + # Show a warning that the user may need to restart + printf " %b Set IP address to %s\\n You may need to restart after the install is complete\\n" "${TICK}" "${IPV4_ADDRESS%%/*}" + fi } setStaticIPv4() { # Local, named variables local IFCFG_FILE - local IPADDR - local CIDR + local CONNECTION_NAME # For the Debian family, if dhcpcd.conf exists, if [[ -f "/etc/dhcpcd.conf" ]]; then - # check if the IP is already in the file - if grep -q "${IPV4_ADDRESS}" /etc/dhcpcd.conf; then - printf " %b Static IP already configured\\n" "${INFO}" - # If it's not, - else - # set it using our function - setDHCPCD - # Then use the ip command to immediately set the new address - ip addr replace dev "${PIHOLE_INTERFACE}" "${IPV4_ADDRESS}" - # Also give a warning that the user may need to reboot their system - printf " %b Set IP address to %s \\n You may need to restart after the install is complete\\n" "${TICK}" "${IPV4_ADDRESS%/*}" - fi - # If it's not Debian, check if it's the Fedora family by checking for the file below - elif [[ -f "/etc/sysconfig/network-scripts/ifcfg-${PIHOLE_INTERFACE}" ]];then + # configure networking via dhcpcd + setDHCPCD + return 0 + fi + # If a DHCPCD config file was not found, check for an ifcfg config file based on interface name + if [[ -f "/etc/sysconfig/network-scripts/ifcfg-${PIHOLE_INTERFACE}" ]];then # If it exists, IFCFG_FILE=/etc/sysconfig/network-scripts/ifcfg-${PIHOLE_INTERFACE} - printf -v IPADDR "%s" "${IPV4_ADDRESS%%/*}" - # check if the desired IP is already set - if grep -Eq "${IPADDR}(\\b|\\/)" "${IFCFG_FILE}"; then - printf " %b Static IP already configured\\n" "${INFO}" - # Otherwise, - else - # Put the IP in variables without the CIDR notation - printf -v CIDR "%s" "${IPV4_ADDRESS##*/}" - # Backup existing interface configuration: - cp "${IFCFG_FILE}" "${IFCFG_FILE}".pihole.orig - # Build Interface configuration file using the GLOBAL variables we have - { - echo "# Configured via Pi-hole installer" - echo "DEVICE=$PIHOLE_INTERFACE" - echo "BOOTPROTO=none" - echo "ONBOOT=yes" - echo "IPADDR=$IPADDR" - echo "PREFIX=$CIDR" - echo "GATEWAY=$IPv4gw" - echo "DNS1=$PIHOLE_DNS_1" - echo "DNS2=$PIHOLE_DNS_2" - echo "USERCTL=no" - }> "${IFCFG_FILE}" - # Use ip to immediately set the new address - ip addr replace dev "${PIHOLE_INTERFACE}" "${IPV4_ADDRESS}" - # If NetworkMangler command line interface exists and ready to mangle, - if is_command nmcli && nmcli general status &> /dev/null; then - # Tell NetworkManagler to read our new sysconfig file - nmcli con load "${IFCFG_FILE}" > /dev/null - fi - # Show a warning that the user may need to restart - printf " %b Set IP address to %s\\n You may need to restart after the install is complete\\n" "${TICK}" "${IPV4_ADDRESS%%/*}" - fi - # If all that fails, - else - # show an error and exit - printf " %b Warning: Unable to locate configuration file to set static IPv4 address\\n" "${INFO}" - exit 1 + setIFCFG "${IFCFG_FILE}" + return 0 fi + # if an ifcfg config does not exists for the interface name, try the connection name via network manager + if is_command nmcli && nmcli general status &> /dev/null; then + CONNECTION_NAME=$(nmcli dev show ${PIHOLE_INTERFACE} | grep 'GENERAL.CONNECTION' | cut -d: -f2 | xargs | tr ' ' '_') + if [[ -f "/etc/sysconfig/network-scripts/ifcfg-${CONNECTION_NAME}" ]];then + # If it exists, + IFCFG_FILE=/etc/sysconfig/network-scripts/ifcfg-${CONNECTION_NAME} + setIFCFG "${IFCFG_FILE}" + return 0 + fi + fi + # If previous conditions failed, show an error and exit + printf " %b Warning: Unable to locate configuration file to set static IPv4 address\\n" "${INFO}" + exit 1 } # Check an IP address to see if it is a valid one