@ -35,11 +35,11 @@ blacklistScript=/opt/pihole/blacklist.sh
#Source the setupVars from install script for the IP
setupVars = /etc/pihole/setupVars.conf
if [ [ -f ${ setupVars } ] ] ; then
. /etc/pihole/setupVars.conf
. /etc/pihole/setupVars.conf
else
echo "::: WARNING: /etc/pihole/setupVars.conf missing. Possible installation failure."
echo "::: Please run 'pihole -r', and choose the 'reconfigure' option to reconfigure."
exit 1
echo "::: WARNING: /etc/pihole/setupVars.conf missing. Possible installation failure."
echo "::: Please run 'pihole -r', and choose the 'reconfigure' option to reconfigure."
exit 1
fi
#Remove the /* from the end of the IPv4addr.
@ -56,8 +56,8 @@ eventHorizon=${basename}.2.eventHorizon.txt
accretionDisc = ${ basename } .3.accretionDisc.txt
# Warn users still using pihole.conf that it no longer has any effect (I imagine about 2 people use it)
if [ [ -r ${ piholeDir } /pihole.conf ] ] ; then
echo "::: pihole.conf file no longer supported. Over-rides in this file are ignored."
if [ [ -r ${ piholeDir } /pihole.conf ] ] ; then
echo "::: pihole.conf file no longer supported. Over-rides in this file are ignored."
fi
###########################
@ -95,17 +95,17 @@ gravity_collapse() {
fi
# Create the pihole resource directory if it doesn't exist. Future files will be stored here
if [ [ -d ${ piholeDir } ] ] ; then
# Temporary hack to allow non-root access to pihole directory
# Will update later, needed for existing installs, new installs should
# create this directory as non-root
chmod 777 ${ piholeDir }
echo ":::"
echo "::: Existing pihole directory found"
if [ [ -d ${ piholeDir } ] ] ; then
# Temporary hack to allow non-root access to pihole directory
# Will update later, needed for existing installs, new installs should
# create this directory as non-root
chmod 777 ${ piholeDir }
echo ":::"
echo "::: Existing pihole directory found"
else
echo "::: Creating pihole directory..."
mkdir ${ piholeDir }
chmod 777 ${ piholeDir }
echo "::: Creating pihole directory..."
mkdir ${ piholeDir }
chmod 777 ${ piholeDir }
fi
}
@ -113,7 +113,7 @@ gravity_collapse() {
gravity_patternCheck( ) {
patternBuffer = $1
# check if the patternbuffer is a non-zero length file
if [ [ -s " $patternBuffer " ] ] ; then
if [ [ -s " $patternBuffer " ] ] ; then
# Some of the blocklists are copyright, they need to be downloaded
# and stored as is. They can be processed for content after they
# have been saved.
@ -151,36 +151,35 @@ gravity_transport() {
gravity_spinup( ) {
echo ":::"
# Loop through domain list. Download each one and remove commented lines (lines beginning with '# 'or '/') and # blank lines
for ( ( i = 0; i < " ${# sources [@] } " ; i++) )
do
url = ${ sources [ $i ] }
# Get just the domain from the URL
domain = $( echo " $url " | cut -d'/' -f3)
# Save the file as list.#.domain
saveLocation = ${ piholeDir } /list.${ i } .${ domain } .${ justDomainsExtension }
activeDomains[ $i ] = ${ saveLocation }
agent = "Mozilla/10.0"
echo -n " ::: Getting $domain list... "
# Use a case statement to download lists that need special cURL commands
# to complete properly and reset the user agent when required
case " $domain " in
"adblock.mahakala.is" )
agent = 'Mozilla/5.0 (Windows NT 6.1) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/41.0.2228.0 Safari/537.36'
cmd_ext = "-e http://forum.xda-developers.com/"
; ;
"pgl.yoyo.org" )
cmd_ext = "-d mimetype=plaintext -d hostformat=hosts"
; ;
# Default is a simple request
*) cmd_ext = ""
esac
gravity_transport " $url " " $cmd_ext " " $agent "
for ( ( i = 0; i < " ${# sources [@] } " ; i++) ) ; do
url = ${ sources [ $i ] }
# Get just the domain from the URL
domain = $( echo " $url " | cut -d'/' -f3)
# Save the file as list.#.domain
saveLocation = ${ piholeDir } /list.${ i } .${ domain } .${ justDomainsExtension }
activeDomains[ $i ] = ${ saveLocation }
agent = "Mozilla/10.0"
echo -n " ::: Getting $domain list... "
# Use a case statement to download lists that need special cURL commands
# to complete properly and reset the user agent when required
case " $domain " in
"adblock.mahakala.is" )
agent = 'Mozilla/5.0 (Windows NT 6.1) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/41.0.2228.0 Safari/537.36'
cmd_ext = "-e http://forum.xda-developers.com/"
; ;
"pgl.yoyo.org" )
cmd_ext = "-d mimetype=plaintext -d hostformat=hosts"
; ;
# Default is a simple request
*) cmd_ext = ""
esac
gravity_transport " $url " " $cmd_ext " " $agent "
done
}
@ -190,8 +189,7 @@ gravity_Schwarzchild() {
# Find all active domains and compile them into one file and remove CRs
echo -n "::: Aggregating list of domains..."
truncate -s 0 ${ piholeDir } /${ matterAndLight }
for i in " ${ activeDomains [@] } "
do
for i in " ${ activeDomains [@] } " ; do
cat " $i " | tr -d '\r' >> ${ piholeDir } /${ matterAndLight }
done
echo " done!"
@ -214,10 +212,9 @@ gravity_Whitelist() {
echo -n " ::: Adding ${# sources [@] } adlist source ${ plural } to the whitelist... "
urls = ( )
for url in " ${ sources [@] } "
do
tmp = $( echo " $url " | awk -F '/' '{print $3}' )
urls = ( " ${ urls [@] } " ${ tmp } )
for url in " ${ sources [@] } " ; do
tmp = $( echo " $url " | awk -F '/' '{print $3}' )
urls = ( " ${ urls [@] } " ${ tmp } )
done
echo " done!"
@ -248,7 +245,7 @@ gravity_hostFormat() {
echo "::: Error: Unable to determine fully qualified domain name of host"
fi
# If there is a value in the $piholeIPv6, then IPv6 will be used, so the awk command modified to create a line for both protocols
if [ [ -n " ${ IPv6_address } " ] ] ; then
if [ [ -n " ${ IPv6_address } " ] ] ; then
# Add hostname and dummy domain to the top of gravity.list to make ping result return a friendlier looking domain! Also allows for an easy way to access the Pi-hole admin console (pi.hole/admin)
echo -e " $IPv4addr $hostname \n $IPv6_address $hostname \n $IPv4addr pi.hole\n $IPv6_address pi.hole " > ${ piholeDir } /${ accretionDisc }
cat ${ piholeDir } /${ eventHorizon } | awk -v ipv4addr = " $IPv4addr " -v ipv6addr = " $IPv6_address " '{sub(/\r$/,""); print ipv4addr" "$0"\n"ipv6addr" "$0}' >> ${ piholeDir } /${ accretionDisc }
@ -266,8 +263,7 @@ gravity_hostFormat() {
# blackbody - remove any remnant files from script processes
gravity_blackbody( ) {
# Loop through list files
for file in ${ piholeDir } /*.${ justDomainsExtension }
do
for file in ${ piholeDir } /*.${ justDomainsExtension } ; do
# If list is in active array then leave it (noop) else rm the list
if [ [ " ${ activeDomains [@] } " = ~ ${ file } ] ] ; then
:
@ -313,32 +309,31 @@ gravity_reload() {
sed -i " s/^addn-hosts.*/addn-hosts= $adList / " /etc/dnsmasq.d/01-pihole.conf
find " $piholeDir " -type f -exec chmod 666 { } \;
dnsmasqPid = $( pidof dnsmasq)
dnsmasqPid = $( pidof dnsmasq)
if [ [ ${ dnsmasqPid } ] ] ; then
# service already running - reload config
if [ -x " $( command -v systemctl) " ] ; then
systemctl restart dnsmasq
else
service dnsmasq restart
fi
# service already running - reload config
if [ -x " $( command -v systemctl) " ] ; then
systemctl restart dnsmasq
else
service dnsmasq restart
fi
else
# service not running, start it up
if [ -x " $( command -v systemctl) " ] ; then
systemctl start dnsmasq
else
service dnsmasq start
fi
# service not running, start it up
if [ -x " $( command -v systemctl) " ] ; then
systemctl start dnsmasq
else
service dnsmasq start
fi
fi
}
for var in " $@ "
do
case " $var " in
"-f" | "--force" ) forceGrav = true; ;
"-h" | "--help" ) helpFunc; ;
esac
for var in " $@ " ; do
case " $var " in
"-f" | "--force" ) forceGrav = true; ;
"-h" | "--help" ) helpFunc; ;
esac
done
if [ [ ${ forceGrav } = = true ] ] ; then