1
0
mirror of https://github.com/pi-hole/pi-hole synced 2024-12-22 23:08:07 +00:00
This commit is contained in:
Promofaux 2016-01-24 18:49:25 +00:00
commit 9f0927351d
5 changed files with 504 additions and 341 deletions

View File

@ -81,13 +81,14 @@ function AddDomain(){
if $bool; then
#domain not found in the blacklist file, add it!
if $versbose; then
echo "** Adding $1 to blacklist file"
echo -n "::: Adding $1 to blacklist file..."
fi
echo $1 >> $blacklist
modifyHost=true
echo " done!"
else
if $versbose; then
echo "** $1 already blacklisted! No need to add"
echo "::: $1 already exists in blacklist.txt! No need to add"
fi
fi
}
@ -99,12 +100,12 @@ function RemoveDomain(){
if $bool; then
#Domain is not in the blacklist file, no need to Remove
if $versbose; then
echo "** $1 is NOT blacklisted! No need to remove"
echo "::: $1 is NOT blacklisted! No need to remove"
fi
else
#Domain is in the blacklist file, add to a temporary array
if $versbose; then
echo "** Un-blacklisting $dom..."
echo "::: Un-blacklisting $dom..."
fi
domToRemoveList=("${domToRemoveList[@]}" $1)
modifyHost=true
@ -117,7 +118,8 @@ function ModifyHostFile(){
if [[ -r $blacklist ]];then
numberOf=$(cat $blacklist | sed '/^\s*$/d' | wc -l)
plural=; [[ "$numberOf" != "1" ]] && plural=s
echo "** blacklisting a total of $numberOf domain${plural}..."
echo ":::"
echo -n "::: Modifying HOSTS file to blacklist $numberOf domain${plural}..."
if [[ -n $piholeIPv6 ]];then
cat $blacklist | awk -v ipv4addr="$piholeIP" -v ipv6addr="$piholeIPv6" '{sub(/\r$/,""); print ipv4addr" "$0"\n"ipv6addr" "$0}' >> $adList
else
@ -126,12 +128,18 @@ function ModifyHostFile(){
fi
else
echo ":::"
for dom in "${domToRemoveList[@]}"
do
#we need to remove the domains from the blacklist file and the host file
echo "::: $dom"
echo -n "::: removing from HOSTS file..."
echo $dom | sed 's/\./\\./g' | xargs -I {} perl -i -ne'print unless /[^.]'{}'(?!.)/;' $adList
echo " done!"
echo -n "::: removing from blackist.txt..."
echo $dom | sed 's/\./\\./g' | xargs -I {} perl -i -ne'print unless /'{}'(?!.)/;' $blacklist
echo " done!"
done
fi
@ -139,7 +147,8 @@ function ModifyHostFile(){
function Reload() {
# Reload hosts file
echo "** Refresh lists in dnsmasq..."
echo ":::"
echo -n "::: Refresh lists in dnsmasq..."
dnsmasqPid=$(pidof dnsmasq)
@ -150,6 +159,7 @@ function Reload() {
# service not running, start it up
sudo service dnsmasq start
fi
echo " done!"
}
###################################################
@ -167,12 +177,11 @@ done
PopBlacklistFile
if $modifyHost || $force; then
echo "** Modifying Hosts File"
if $modifyHost || $force; then
ModifyHostFile
else
if $versbose; then
echo "** No changes need to be made"
echo "::: No changes need to be made"
fi
exit 1
fi

View File

@ -52,7 +52,7 @@ function HandleOther(){
validDomain=$(echo $1 | perl -ne'print if /\b((?=[a-z0-9-]{1,63}\.)(xn--)?[a-z0-9]+(-[a-z0-9]+)*\.)+[a-z]{2,63}\b/')
if [ -z "$validDomain" ]; then
echo $1 is not a valid argument or domain name
echo "::: $1 is not a valid argument or domain name"
else
domList=("${domList[@]}" $validDomain)
fi
@ -76,17 +76,21 @@ function PopWhitelistFile(){
function AddDomain(){
#| sed 's/\./\\./g'
bool=false
grep -Ex -q "$1" $whitelist || bool=true
if $bool; then
#domain not found in the whitelist file, add it!
if $versbose; then
echo "** Adding $1 to whitelist file"
echo -n "::: Adding $1 to whitelist.txt..."
fi
echo $1 >> $whitelist
echo $1 >> $whitelist
modifyHost=true
if $versbose; then
echo " done!"
fi
else
if $versbose; then
echo "** $1 already whitelisted! No need to add"
echo "::: $1 already exists in whitelist.txt, no need to add!"
fi
fi
}
@ -98,13 +102,13 @@ function RemoveDomain(){
if $bool; then
#Domain is not in the whitelist file, no need to Remove
if $versbose; then
echo "** $1 is NOT whitelisted! No need to remove"
echo "::: $1 is NOT whitelisted! No need to remove"
fi
else
#Domain is in the whitelist file, add to a temporary array and remove from whitelist file
if $versbose; then
echo "** Un-whitelisting $dom..."
fi
#if $versbose; then
#echo "::: Un-whitelisting $dom..."
#fi
domToRemoveList=("${domToRemoveList[@]}" $1)
modifyHost=true
fi
@ -115,30 +119,46 @@ function ModifyHostFile(){
#remove domains in from hosts file
if [[ -r $whitelist ]];then
# Remove whitelist entries
numberOf=$(cat $whitelist | sed '/^\s*$/d' | wc -l)
numberOf=$(cat $whitelist | sed '/^\s*$/d' | wc -l)
plural=; [[ "$numberOf" != "1" ]] && plural=s
echo "** Whitelisting a total of $numberOf domain${plural}..."
awk -F':' '{ print $1 }' $whitelist | sed 's/\./\\./g' | xargs -I {} perl -i -ne'print unless /[^.]'{}'(?!.)/;' $adList
echo ":::"
echo -n "::: Modifying HOSTS file to whitelist $numberOf domain${plural}..."
awk -F':' '{print $1}' $whitelist | while read line; do echo "$piholeIP $line"; done > /etc/pihole/whitelist.tmp
awk -F':' '{print $1}' $whitelist | while read line; do echo "$piholeIPv6 $line"; done >> /etc/pihole/whitelist.tmp
echo "l" >> /etc/pihole/whitelist.tmp
grep -F -x -v -f /etc/pihole/whitelist.tmp /etc/pihole/gravity.list > /etc/pihole/gravity.tmp
rm /etc/pihole/gravity.list
mv /etc/pihole/gravity.tmp /etc/pihole/gravity.list
rm /etc/pihole/whitelist.tmp
echo " done!"
fi
else
#we need to add the removed domains to the hosts file
echo ":::"
echo "::: Modifying HOSTS file to un-whitelist domains..."
for rdom in "${domToRemoveList[@]}"
do
do
if [[ -n $piholeIPv6 ]];then
echo "**Blacklisting $rdom on IPv4 and IPv6"
echo -n "::: Un-whitelisting $rdom on IPv4 and IPv6..."
echo $rdom | awk -v ipv4addr="$piholeIP" -v ipv6addr="$piholeIPv6" '{sub(/\r$/,""); print ipv4addr" "$0"\n"ipv6addr" "$0}' >> $adList
echo " done!"
else
echo "**Blacklisting $rdom on IPv4"
echo -n "::: Un-whitelisting $rdom on IPv4"
echo $rdom | awk -v ipv4addr="$piholeIP" '{sub(/\r$/,""); print ipv4addr" "$0}' >>$adList
fi
echo " done!"
fi
echo -n "::: Removing $rdom from whitelist.txt..."
echo $rdom| sed 's/\./\\./g' | xargs -I {} perl -i -ne'print unless /'{}'(?!.)/;' $whitelist
echo " done!"
done
fi
}
function Reload() {
# Reload hosts file
echo "** Refresh lists in dnsmasq..."
echo ":::"
echo -n "::: Refresh lists in dnsmasq..."
dnsmasqPid=$(pidof dnsmasq)
if [[ $dnsmasqPid ]]; then
@ -148,6 +168,7 @@ function Reload() {
# service not running, start it up
sudo service dnsmasq start
fi
echo " done!"
}
###################################################
@ -166,11 +187,11 @@ done
PopWhitelistFile
if $modifyHost || $force; then
echo "** Modifying Hosts File"
ModifyHostFile
ModifyHostFile
else
if $versbose; then
echo "** No changes need to be made"
echo ":::"
echo "::: No changes need to be made"
exit 1
fi
fi

View File

@ -17,25 +17,15 @@
# curl -L install.pi-hole.net | bash
######## VARIABLES #########
# Must be root to install
if [[ $EUID -eq 0 ]];then
echo "You are root."
else
echo "::: sudo will be used for the install."
# Check if it is actually installed
# If it isn't, exit because the install cannot complete
if [[ $(dpkg-query -s sudo) ]];then
export SUDO="sudo"
else
echo "::: Please install sudo or run this as root."
exit 1
fi
fi
tmpLog=/tmp/pihole-install.log
instalLogLoc=/etc/pihole/install.log
webInterfaceGitUrl="https://github.com/pi-hole/AdminLTE.git"
webInterfaceDir="/var/www/html/admin"
piholeGitUrl="https://github.com/pi-hole/pi-hole.git"
piholeFilesDir="/etc/.pihole"
# Find the rows and columns
rows=$(tput lines)
columns=$(tput cols)
@ -52,240 +42,259 @@ IPv4gw=$(ip route get 8.8.8.8 | awk '{print $3}')
availableInterfaces=$(ip -o link | awk '{print $2}' | grep -v "lo" | cut -d':' -f1)
dhcpcdFile=/etc/dhcpcd.conf
######## FIRST CHECK ########
# Must be root to install
echo ":::"
if [[ $EUID -eq 0 ]];then
echo "You are root."
else
echo "::: sudo will be used for the install."
# Check if it is actually installed
# If it isn't, exit because the install cannot complete
if [[ $(dpkg-query -s sudo) ]];then
export SUDO="sudo"
else
echo "::: Please install sudo or run this as root."
exit 1
fi
fi
if [ -f "/etc/dnsmasq.d/01-pihole.conf" ]; then
#Likely an existing install
upgrade=true
else
upgrade=false
fi
####### FUNCTIONS ##########
###All credit for the below function goes to http://fitnr.com/showing-a-bash-spinner.html
spinner()
{
local pid=$1
local delay=0.001
local spinstr='|/-\'
while [ "$(ps a | awk '{print $1}' | grep $pid)" ]; do
local temp=${spinstr#?}
printf " [%c] " "$spinstr"
local spinstr=$temp${spinstr%"$temp"}
sleep $delay
printf "\b\b\b\b\b\b"
done
printf " \b\b\b\b"
spinner(){
local pid=$1
local delay=0.001
local spinstr='/-\|'
spin='-\|/'
i=0
while kill -0 $pid 2>/dev/null
do
i=$(( (i+1) %4 ))
printf "\b${spin:$i:1}"
sleep .1
done
printf "\b"
}
backupLegacyPihole()
{
if [[ -f /etc/dnsmasq.d/adList.conf ]];then
echo "Original Pi-hole detected. Initiating sub space transport"
$SUDO mkdir -p /etc/pihole/original/
$SUDO mv /etc/dnsmasq.d/adList.conf /etc/pihole/original/adList.conf.$(date "+%Y-%m-%d")
$SUDO mv /etc/dnsmasq.conf /etc/pihole/original/dnsmasq.conf.$(date "+%Y-%m-%d")
$SUDO mv /etc/resolv.conf /etc/pihole/original/resolv.conf.$(date "+%Y-%m-%d")
$SUDO mv /etc/lighttpd/lighttpd.conf /etc/pihole/original/lighttpd.conf.$(date "+%Y-%m-%d")
$SUDO mv /var/www/pihole/index.html /etc/pihole/original/index.html.$(date "+%Y-%m-%d")
$SUDO mv /usr/local/bin/gravity.sh /etc/pihole/original/gravity.sh.$(date "+%Y-%m-%d")
else
:
fi
backupLegacyPihole(){
if [[ -f /etc/dnsmasq.d/adList.conf ]];then
echo "Original Pi-hole detected. Initiating sub space transport"
$SUDO mkdir -p /etc/pihole/original/
$SUDO mv /etc/dnsmasq.d/adList.conf /etc/pihole/original/adList.conf.$(date "+%Y-%m-%d")
$SUDO mv /etc/dnsmasq.conf /etc/pihole/original/dnsmasq.conf.$(date "+%Y-%m-%d")
$SUDO mv /etc/resolv.conf /etc/pihole/original/resolv.conf.$(date "+%Y-%m-%d")
$SUDO mv /etc/lighttpd/lighttpd.conf /etc/pihole/original/lighttpd.conf.$(date "+%Y-%m-%d")
$SUDO mv /var/www/pihole/index.html /etc/pihole/original/index.html.$(date "+%Y-%m-%d")
$SUDO mv /usr/local/bin/gravity.sh /etc/pihole/original/gravity.sh.$(date "+%Y-%m-%d")
else
:
fi
}
welcomeDialogs()
{
# Display the welcome dialog
whiptail --msgbox --backtitle "Welcome" --title "Pi-hole automated installer" "This installer will transform your Raspberry Pi into a network-wide ad blocker!" $r $c
# Support for a part-time dev
whiptail --msgbox --backtitle "Plea" --title "Free and open source" "The Pi-hole is free, but powered by your donations: http://pi-hole.net/donate" $r $c
# Explain the need for a static address
whiptail --msgbox --backtitle "Initating network interface" --title "Static IP Needed" "The Pi-hole is a SERVER so it needs a STATIC IP ADDRESS to function properly.
In the next section, you can choose to use your current network settings (DHCP) or to manually edit them." $r $c
}
chooseInterface()
{
# Turn the available interfaces into an array so it can be used with a whiptail dialog
interfacesArray=()
firstloop=1
while read -r line
do
mode="OFF"
if [[ $firstloop -eq 1 ]]; then
firstloop=0
mode="ON"
fi
interfacesArray+=("$line" "available" "$mode")
done <<< "$availableInterfaces"
# Find out how many interfaces are available to choose from
interfaceCount=$(echo "$availableInterfaces" | wc -l)
chooseInterfaceCmd=(whiptail --separate-output --radiolist "Choose An Interface" $r $c $interfaceCount)
chooseInterfaceOptions=$("${chooseInterfaceCmd[@]}" "${interfacesArray[@]}" 2>&1 >/dev/tty)
for desiredInterface in $chooseInterfaceOptions
do
piholeInterface=$desiredInterface
echo "::: Using interface: $piholeInterface"
echo ${piholeInterface} > /tmp/piholeINT
done
}
use4andor6()
{
# Let use select IPv4 and/or IPv6
cmd=(whiptail --separate-output --checklist "Select Protocols" $r $c 2)
options=(IPv4 "Block ads over IPv4" on
IPv6 "Block ads over IPv6" off)
choices=$("${cmd[@]}" "${options[@]}" 2>&1 >/dev/tty)
for choice in $choices
do
case $choice in
IPv4)useIPv4=true;;
IPv6)useIPv6=true;;
esac
done
if [ $useIPv4 ] && [ ! $useIPv6 ]; then
getStaticIPv4Settings
setStaticIPv4
echo "::: Using IPv4 on $IPv4addr"
echo "::: IPv6 will NOT be used."
fi
if [ ! $useIPv4 ] && [ $useIPv6 ]; then
useIPv6dialog
echo "::: IPv4 will NOT be used."
echo "::: Using IPv6 on $piholeIPv6"
fi
if [ $useIPv4 ] && [ $useIPv6 ]; then
getStaticIPv4Settings
setStaticIPv4
useIPv6dialog
echo "::: Using IPv4 on $IPv4addr"
echo "::: Using IPv6 on $piholeIPv6"
fi
if [ ! $useIPv4 ] && [ ! $useIPv6 ]; then
echo "::: Cannot continue, neither IPv4 or IPv6 selected"
echo "::: Exiting"
exit 1
fi
welcomeDialogs(){
# Display the welcome dialog
whiptail --msgbox --backtitle "Welcome" --title "Pi-hole automated installer" "This installer will transform your Raspberry Pi into a network-wide ad blocker!" $r $c
# Support for a part-time dev
whiptail --msgbox --backtitle "Plea" --title "Free and open source" "The Pi-hole is free, but powered by your donations: http://pi-hole.net/donate" $r $c
# Explain the need for a static address
whiptail --msgbox --backtitle "Initating network interface" --title "Static IP Needed" "The Pi-hole is a SERVER so it needs a STATIC IP ADDRESS to function properly.
In the next section, you can choose to use your current network settings (DHCP) or to manually edit them." $r $c
}
useIPv6dialog()
{
piholeIPv6=$(ip -6 route get 2001:4860:4860::8888 | awk -F " " '{ for(i=1;i<=NF;i++) if ($i == "src") print $(i+1) }')
whiptail --msgbox --backtitle "IPv6..." --title "IPv6 Supported" "$piholeIPv6 will be used to block ads." $r $c
$SUDO touch /etc/pihole/.useIPv6
}
getStaticIPv4Settings()
{
# Ask if the user wants to use DHCP settings as their static IP
if (whiptail --backtitle "Calibrating network interface" --title "Static IP Address" --yesno "Do you want to use your current network settings as a static address?
IP address: $IPv4addr
Gateway: $IPv4gw" $r $c) then
# If they choose yes, let the user know that the IP address will not be available via DHCP and may cause a conflict.
whiptail --msgbox --backtitle "IP information" --title "FYI: IP Conflict" "It is possible your router could still try to assign this IP to a device, which would cause a conflict. But in most cases the router is smart enough to not do that.
If you are worried, either manually set the address, or modify the DHCP reservation pool so it does not include the IP you want.
It is also possible to use a DHCP reservation, but if you are going to do that, you might as well set a static address." $r $c
# Nothing else to do since the variables are already set above
else
# Otherwise, we need to ask the user to input their desired settings.
# Start by getting the IPv4 address (pre-filling it with info gathered from DHCP)
# Start a loop to let the user enter their information with the chance to go back and edit it if necessary
until [[ $ipSettingsCorrect = True ]]
chooseInterface(){
# Turn the available interfaces into an array so it can be used with a whiptail dialog
interfacesArray=()
firstloop=1
while read -r line
do
# Ask for the IPv4 address
IPv4addr=$(whiptail --backtitle "Calibrating network interface" --title "IPv4 address" --inputbox "Enter your desired IPv4 address" $r $c $IPv4addr 3>&1 1>&2 2>&3)
if [[ $? = 0 ]];then
echo "Your static IPv4 address: $IPv4addr"
# Ask for the gateway
IPv4gw=$(whiptail --backtitle "Calibrating network interface" --title "IPv4 gateway (router)" --inputbox "Enter your desired IPv4 default gateway" $r $c $IPv4gw 3>&1 1>&2 2>&3)
mode="OFF"
if [[ $firstloop -eq 1 ]]; then
firstloop=0
mode="ON"
fi
interfacesArray+=("$line" "available" "$mode")
done <<< "$availableInterfaces"
# Find out how many interfaces are available to choose from
interfaceCount=$(echo "$availableInterfaces" | wc -l)
chooseInterfaceCmd=(whiptail --separate-output --radiolist "Choose An Interface" $r $c $interfaceCount)
chooseInterfaceOptions=$("${chooseInterfaceCmd[@]}" "${interfacesArray[@]}" 2>&1 >/dev/tty)
for desiredInterface in $chooseInterfaceOptions
do
piholeInterface=$desiredInterface
echo "::: Using interface: $piholeInterface"
echo ${piholeInterface} > /tmp/piholeINT
done
}
use4andor6(){
# Let use select IPv4 and/or IPv6
cmd=(whiptail --separate-output --checklist "Select Protocols" $r $c 2)
options=(IPv4 "Block ads over IPv4" on
IPv6 "Block ads over IPv6" off)
choices=$("${cmd[@]}" "${options[@]}" 2>&1 >/dev/tty)
for choice in $choices
do
case $choice in
IPv4 ) useIPv4=true;;
IPv6 ) useIPv6=true;;
esac
done
if [ $useIPv4 ] && [ ! $useIPv6 ]; then
getStaticIPv4Settings
setStaticIPv4
echo "::: Using IPv4 on $IPv4addr"
echo "::: IPv6 will NOT be used."
fi
if [ ! $useIPv4 ] && [ $useIPv6 ]; then
useIPv6dialog
echo "::: IPv4 will NOT be used."
echo "::: Using IPv6 on $piholeIPv6"
fi
if [ $useIPv4 ] && [ $useIPv6 ]; then
getStaticIPv4Settings
setStaticIPv4
useIPv6dialog
echo "::: Using IPv4 on $IPv4addr"
echo "::: Using IPv6 on $piholeIPv6"
fi
if [ ! $useIPv4 ] && [ ! $useIPv6 ]; then
echo "::: Cannot continue, neither IPv4 or IPv6 selected"
echo "::: Exiting"
exit 1
fi
}
useIPv6dialog(){
piholeIPv6=$(ip -6 route get 2001:4860:4860::8888 | awk -F " " '{ for(i=1;i<=NF;i++) if ($i == "src") print $(i+1) }')
whiptail --msgbox --backtitle "IPv6..." --title "IPv6 Supported" "$piholeIPv6 will be used to block ads." $r $c
$SUDO mkdir -p /etc/pihole/
$SUDO touch /etc/pihole/.useIPv6
}
getStaticIPv4Settings(){
# Ask if the user wants to use DHCP settings as their static IP
if (whiptail --backtitle "Calibrating network interface" --title "Static IP Address" --yesno "Do you want to use your current network settings as a static address?
IP address: $IPv4addr
Gateway: $IPv4gw" $r $c) then
# If they choose yes, let the user know that the IP address will not be available via DHCP and may cause a conflict.
whiptail --msgbox --backtitle "IP information" --title "FYI: IP Conflict" "It is possible your router could still try to assign this IP to a device, which would cause a conflict. But in most cases the router is smart enough to not do that.
If you are worried, either manually set the address, or modify the DHCP reservation pool so it does not include the IP you want.
It is also possible to use a DHCP reservation, but if you are going to do that, you might as well set a static address." $r $c
# Nothing else to do since the variables are already set above
else
# Otherwise, we need to ask the user to input their desired settings.
# Start by getting the IPv4 address (pre-filling it with info gathered from DHCP)
# Start a loop to let the user enter their information with the chance to go back and edit it if necessary
until [[ $ipSettingsCorrect = True ]]
do
# Ask for the IPv4 address
IPv4addr=$(whiptail --backtitle "Calibrating network interface" --title "IPv4 address" --inputbox "Enter your desired IPv4 address" $r $c $IPv4addr 3>&1 1>&2 2>&3)
if [[ $? = 0 ]];then
echo "Your static IPv4 gateway: $IPv4gw"
# Give the user a chance to review their settings before moving on
if (whiptail --backtitle "Calibrating network interface" --title "Static IP Address" --yesno "Are these settings correct?
IP address: $IPv4addr
Gateway: $IPv4gw" $r $c)then
# If the settings are correct, then we need to set the piholeIP
# Saving it to a temporary file us to retrieve it later when we run the gravity.sh script
echo ${IPv4addr%/*} > /tmp/piholeIP
echo $piholeInterface > /tmp/piholeINT
# After that's done, the loop ends and we move on
ipSettingsCorrect=True
echo "Your static IPv4 address: $IPv4addr"
# Ask for the gateway
IPv4gw=$(whiptail --backtitle "Calibrating network interface" --title "IPv4 gateway (router)" --inputbox "Enter your desired IPv4 default gateway" $r $c $IPv4gw 3>&1 1>&2 2>&3)
if [[ $? = 0 ]];then
echo "Your static IPv4 gateway: $IPv4gw"
# Give the user a chance to review their settings before moving on
if (whiptail --backtitle "Calibrating network interface" --title "Static IP Address" --yesno "Are these settings correct?
IP address: $IPv4addr
Gateway: $IPv4gw" $r $c)then
# If the settings are correct, then we need to set the piholeIP
# Saving it to a temporary file us to retrieve it later when we run the gravity.sh script
echo ${IPv4addr%/*} > /tmp/piholeIP
echo $piholeInterface > /tmp/piholeINT
# After that's done, the loop ends and we move on
ipSettingsCorrect=True
else
# If the settings are wrong, the loop continues
ipSettingsCorrect=False
fi
else
# If the settings are wrong, the loop continues
# Cancelling gateway settings window
ipSettingsCorrect=False
echo "User canceled."
exit
fi
else
# Cancelling gateway settings window
# Cancelling IPv4 settings window
ipSettingsCorrect=False
echo "User canceled."
exit
fi
else
# Cancelling IPv4 settings window
ipSettingsCorrect=False
echo "User canceled."
exit
done
# End the if statement for DHCP vs. static
fi
done
# End the if statement for DHCP vs. static
fi
}
setDHCPCD(){
# Append these lines to dhcpcd.conf to enable a static IP
echo "interface $piholeInterface
static ip_address=$IPv4addr
static routers=$IPv4gw
static domain_name_servers=$IPv4gw" | $SUDO tee -a $dhcpcdFile >/dev/null
#Append these lines to dhcpcd.conf to enable a static IP
echo "interface $piholeInterface
static ip_address=$IPv4addr
static routers=$IPv4gw
static domain_name_servers=$IPv4gw" | $SUDO tee -a $dhcpcdFile >/dev/null
}
setStaticIPv4(){
if grep -q $IPv4addr $dhcpcdFile; then
# address already set, noop
:
else
setDHCPCD
$SUDO ip addr replace dev $piholeInterface $IPv4addr
echo "Setting IP to $IPv4addr. You may need to restart after the install is complete."
fi
if grep -q $IPv4addr $dhcpcdFile; then
# address already set, noop
:
else
setDHCPCD
$SUDO ip addr replace dev $piholeInterface $IPv4addr
echo "Setting IP to $IPv4addr. You may need to restart after the install is complete."
fi
}
installScripts(){
$SUDO echo " "
$SUDO echo "::: Installing scripts..."
#$SUDO rm /usr/local/bin/{gravity,chronometer,whitelist,blacklist,piholeLogFlush,updateDashboard}.sh
$SUDO curl -o /usr/local/bin/gravity.sh https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/gravity.sh
$SUDO curl -o /usr/local/bin/chronometer.sh https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/Scripts/chronometer.sh
$SUDO curl -o /usr/local/bin/whitelist.sh https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/Scripts/whitelist.sh
$SUDO curl -o /usr/local/bin/blacklist.sh https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/Scripts/blacklist.sh
$SUDO curl -o /usr/local/bin/piholeLogFlush.sh https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/Scripts/piholeLogFlush.sh
$SUDO curl -o /usr/local/bin/updateDashboard.sh https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/Scripts/updateDashboard.sh
$SUDO chmod 755 /usr/local/bin/{gravity,chronometer,whitelist,blacklist,piholeLogFlush,updateDashboard}.sh
$SUDO echo "::: ...done."
$SUDO echo ":::"
$SUDO echo -n "::: Installing scripts..."
$SUDO cp /etc/.pihole/gravity.sh /usr/local/bin/gravity.sh
$SUDO cp /etc/.pihole/advanced/Scripts/chronometer.sh /usr/local/bin/chronometer.sh
$SUDO cp /etc/.pihole/advanced/Scripts/whitelist.sh /usr/local/bin/whitelist.sh
$SUDO cp /etc/.pihole/advanced/Scripts/blacklist.sh /usr/local/bin/blacklist.sh
$SUDO cp /etc/.pihole/advanced/Scripts/piholeLogFlush.sh /usr/local/bin/piholeLogFlush.sh
$SUDO cp /etc/.pihole/advanced/Scripts/updateDashboard.sh /usr/local/bin/updateDashboard.sh
$SUDO chmod 755 /usr/local/bin/{gravity,chronometer,whitelist,blacklist,piholeLogFlush,updateDashboard}.sh
$SUDO echo " done."
}
installConfigs(){
$SUDO echo " "
$SUDO echo "::: Installing configs..."
$SUDO mv /etc/dnsmasq.conf /etc/dnsmasq.conf.orig
$SUDO mv /etc/lighttpd/lighttpd.conf /etc/lighttpd/lighttpd.conf.orig
$SUDO curl -o /etc/dnsmasq.conf https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/dnsmasq.conf
$SUDO curl -o /etc/lighttpd/lighttpd.conf https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/lighttpd.conf
$SUDO sed -i "s/@INT@/$piholeInterface/" /etc/dnsmasq.conf
$SUDO echo "::: ...done."
$SUDO echo ":::"
$SUDO echo -n "::: Installing configs..."
$SUDO mv /etc/dnsmasq.conf /etc/dnsmasq.conf.orig
$SUDO mv /etc/lighttpd/lighttpd.conf /etc/lighttpd/lighttpd.conf.orig
$SUDO cp /etc/.pihole/advanced/dnsmasq.conf /etc/dnsmasq.conf
$SUDO cp /etc/.pihole/advanced/lighttpd.conf /etc/lighttpd/lighttpd.conf
$SUDO sed -i "s/@INT@/$piholeInterface/" /etc/dnsmasq.conf
$SUDO echo " done."
}
stopServices(){
$SUDO echo " "
$SUDO echo "::: Stopping services..."
$SUDO service dnsmasq stop || true
$SUDO service lighttpd stop || true
$SUDO echo "::: ...done."
$SUDO echo ":::"
$SUDO echo -n "::: Stopping services..."
$SUDO service dnsmasq stop & spinner $! || true
$SUDO service lighttpd stop & spinner $! || true
$SUDO echo " done."
}
<<<<<<< HEAD
installDependencies(){
$SUDO echo " "
$SUDO echo "::: Updating apt-get package list"
@ -305,92 +314,174 @@ $SUDO echo "::: ...done."
$SUDO echo "::: Installing git..."
$SUDO apt-get -yqq install git & spinner $!
$SUDO echo "::: ...done."
=======
checkForDependencies(){
echo ":::"
#Check to see if apt-get update has already been run today
timestamp=$(stat -c %Y /var/cache/apt/)
timestampAsDate=$(date -d @$timestamp "+%b %e")
today=$(date "+%b %e")
if [ ! "$today" == "$timestampAsDate" ]; then
#update package lists
echo -n "::: Updating package list before install...."
$SUDO apt-get -qq update > /dev/null & spinner $!
echo " done!"
echo -n "::: Upgrading installed apt-get packages...."
$SUDO apt-get -y -qq upgrade > /dev/null & spinner $!
echo " done!"
else
echo "::: Apt-get update already run today, any more would be overkill..."
fi
echo ":::"
echo "::: Checking dependencies:"
dependencies=( dnsutils bc toilet figlet dnsmasq lighttpd php5-common php5-cgi php5 git curl unzip wget )
for i in "${dependencies[@]}"
do
:
echo -n "::: Checking for $i..."
if [ $(dpkg-query -W -f='${Status}' $i 2>/dev/null | grep -c "ok installed") -eq 0 ]; then
echo -n " Not found! Installing...."
apt-get -y -qq install $i > /dev/null & spinner $!
echo " done!"
else
echo " already installed!"
fi
done
>>>>>>> 736edf44e4bf89e2e7f57e4c062453aa5af0fcac
}
installWebAdmin(){
$SUDO echo " "
$SUDO echo "::: Downloading and installing latest WebAdmin files..."
if [ -d "/var/www/html/admin" ]; then
$SUDO rm -rf /var/www/html/admin
fi
if [ -d "/var/www/html/AdminLTE-master" ]; then
$SUDO rm -rf /var/www/html/AdminLTE-master
fi
$SUDO wget -nv https://github.com/jacobsalmela/AdminLTE/archive/master.zip -O /var/www/master.zip & spinner $!
$SUDO unzip -oq /var/www/master.zip -d /var/www/html/
$SUDO mv /var/www/html/AdminLTE-master /var/www/html/admin
$SUDO rm /var/www/master.zip 2>/dev/null
$SUDO echo "::: ...Done."
getGitFiles(){
echo ":::"
echo "::: Checking for existing base files..."
if is_repo $piholeFilesDir; then
make_repo $piholeFilesDir $piholeGitUrl
else
update_repo $piholeFilesDir
fi
$SUDO echo "::: Creating log file and changing owner to dnsmasq..."
if [ ! -f /var/log/pihole.log ]; then
$SUDO touch /var/log/pihole.log
$SUDO chmod 644 /var/log/pihole.log
$SUDO chown dnsmasq:root /var/log/pihole.log
else
$SUDO echo "::: No need to create, already exists!"
fi
$SUDO echo "::: ...done."
echo ":::"
echo "::: Checking for existing web interface..."
if is_repo $webInterfaceDir; then
make_repo $webInterfaceDir $webInterfaceGitUrl
else
update_repo $webInterfaceDir
fi
}
is_repo() {
echo -n "::: Checking $1 is a repo..."
# if the directory does not have a .git folder
# it is not a repo
if [ -d "$1/.git" ]; then
echo " OK!"
return 1
fi
echo " not found!!"
return 0
}
make_repo() {
# remove the non-repod interface and clone the interface
echo -n "::: Cloning $2 into $1..."
$SUDO rm -rf $1
$SUDO git clone -q "$2" "$1" > /dev/null & spinner $!
echo " done!"
}
update_repo() {
# pull the latest commits
echo -n "::: Updating repo in $1..."
cd "$1"
$SUDO git pull -q > /dev/null & spinner $!
echo " done!"
}
CreateLogFile(){
echo ":::"
$SUDO echo -n "::: Creating log file and changing owner to dnsmasq..."
if [ ! -f /var/log/pihole.log ]; then
$SUDO touch /var/log/pihole.log
$SUDO chmod 644 /var/log/pihole.log
$SUDO chown dnsmasq:root /var/log/pihole.log
$SUDO echo " done!"
else
$SUDO echo " already exists!"
fi
}
installPiholeWeb(){
$SUDO echo " "
$SUDO echo "::: Downloading and installing pihole custom index page..."
if [ -d "/var/www/html/pihole" ]; then
$SUDO echo "::: Existing page detected, not overwriting"
else
$SUDO mkdir /var/www/html/pihole
$SUDO mv /var/www/html/index.lighttpd.html /var/www/html/index.lighttpd.orig
$SUDO curl -o /var/www/html/pihole/index.html https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/index.html
fi
$SUDO echo "::: ...done."
$SUDO echo ":::"
$SUDO echo -n "::: Installing pihole custom index page..."
if [ -d "/var/www/html/pihole" ]; then
$SUDO echo " Existing page detected, not overwriting"
else
$SUDO mkdir /var/www/html/pihole
$SUDO mv /var/www/html/index.lighttpd.html /var/www/html/index.lighttpd.orig
$SUDO cp /etc/.pihole/advanced/index.html /var/www/html/pihole/index.html
$SUDO echo " done!"
fi
}
installCron(){
$SUDO echo " "
$SUDO echo "::: Downloading latest Cron script..."
$SUDO curl -o /etc/cron.d/pihole https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/pihole.cron
$SUDO echo "::: ...done."
$SUDO echo ":::"
$SUDO echo -n "::: Installing latest Cron script..."
$SUDO cp /etc/.pihole/advanced/pihole.cron /etc/cron.d/pihole
$SUDO echo " done!"
}
runGravity()
{
$SUDO echo " "
$SUDO echo "::: Preparing to run gravity.sh to refresh hosts..."
if ls /etc/pihole/list* 1> /dev/null 2>&1; then
echo "::: Cleaning up previous install (preserving whitelist/blacklist)"
$SUDO rm /etc/pihole/list.*
fi
#Don't run as SUDO, this was causing issues
/usr/local/bin/gravity.sh
$SUDO echo "::: ...done."
runGravity(){
$SUDO echo ":::"
$SUDO echo "::: Preparing to run gravity.sh to refresh hosts..."
if ls /etc/pihole/list* 1> /dev/null 2>&1; then
echo "::: Cleaning up previous install (preserving whitelist/blacklist)"
$SUDO rm /etc/pihole/list.*
fi
#Don't run as SUDO, this was causing issues
echo "::: Running gravity.sh"
echo ":::"
/usr/local/bin/gravity.sh
}
installPihole()
{
installDependencies
stopServices
$SUDO mkdir -p /etc/pihole/
$SUDO chown www-data:www-data /var/www/html
$SUDO chmod 775 /var/www/html
$SUDO usermod -a -G www-data pi
$SUDO lighty-enable-mod fastcgi fastcgi-php
installScripts
installConfigs
installWebAdmin
installPiholeWeb
installCron
runGravity
installPihole(){
checkForDependencies # done
stopServices
$SUDO chown www-data:www-data /var/www/html
$SUDO chmod 775 /var/www/html
$SUDO usermod -a -G www-data pi
$SUDO lighty-enable-mod fastcgi fastcgi-php > /dev/null
getGitFiles
installScripts
installConfigs
#installWebAdmin
CreateLogFile
installPiholeWeb
installCron
runGravity
}
displayFinalMessage(){
whiptail --msgbox --backtitle "Make it so." --title "Installation Complete!" "Configure your devices to use the Pi-hole as their DNS server using:
whiptail --msgbox --backtitle "Make it so." --title "Installation Complete!" "Configure your devices to use the Pi-hole as their DNS server using:
$IPv4addr
$piholeIPv6
$IPv4addr
$piholeIPv6
If you set a new IP address, you should restart the Pi.
@ -403,14 +494,13 @@ welcomeDialogs
# Just back up the original Pi-hole right away since it won't take long and it gets it out of the way
backupLegacyPihole
# Find interfaces and let the user choose one
chooseInterface
# Let the user decide if they want to block ads over IPv4 and/or IPv6
use4andor6
# Install and log everything to a file
installPihole | tee $tmpLog

View File

View File

@ -11,8 +11,9 @@
# (at your option) any later version.
# Run this script as root or under sudo
echo ":::"
if [[ $EUID -eq 0 ]];then
echo "You are root."
echo "::: You are root."
else
echo "::: sudo will be used."
# Check if it is actually installed
@ -72,14 +73,30 @@ eyeOfTheNeedle=$basename.4.wormhole.txt
# After setting defaults, check if there's local overrides
if [[ -r $piholeDir/pihole.conf ]];then
echo "** Local calibration requested..."
echo "::: Local calibration requested..."
. $piholeDir/pihole.conf
fi
spinner(){
local pid=$1
local delay=0.001
local spinstr='/-\|'
spin='-\|/'
i=0
while kill -0 $pid 2>/dev/null
do
i=$(( (i+1) %4 ))
printf "\b${spin:$i:1}"
sleep .1
done
printf "\b"
}
###########################
# collapse - begin formation of pihole
function gravity_collapse() {
echo "** Neutrino emissions detected..."
echo -n "::: Neutrino emissions detected..."
# Create the pihole resource directory if it doesn't exist. Future files will be stored here
if [[ -d $piholeDir ]];then
@ -87,10 +104,12 @@ function gravity_collapse() {
# Will update later, needed for existing installs, new installs should
# create this directory as non-root
$SUDO chmod 777 $piholeDir
find "$piholeDir" -type f -exec $SUDO chmod 666 {} \;
find "$piholeDir" -type f -exec $SUDO chmod 666 {} \; & spinner $!
echo "."
else
echo "** Creating pihole directory..."
mkdir $piholeDir
echo -n "::: Creating pihole directory..."
mkdir $piholeDir & spinner $!
echo " done!"
fi
}
@ -103,10 +122,10 @@ function gravity_patternCheck() {
# and stored as is. They can be processed for content after they
# have been saved.
cp $patternBuffer $saveLocation
echo "List updated, transport successful..."
echo " List updated, transport successful!"
else
# curl didn't download any host files, probably because of the date check
echo "No changes detected, transport skipped..."
echo " No changes detected, transport skipped!"
fi
}
@ -125,9 +144,9 @@ function gravity_transport() {
fi
# Silently curl url
curl -s $cmd_ext $heisenbergCompensator -A "$agent" $url > $patternBuffer
curl -s $cmd_ext $heisenbergCompensator -A "$agent" $url > $patternBuffer
# Check for list updates
gravity_patternCheck $patternBuffer
gravity_patternCheck $patternBuffer
# Cleanup
rm -f $patternBuffer
@ -135,7 +154,7 @@ function gravity_transport() {
# spinup - main gravity function
function gravity_spinup() {
echo "::: "
# Loop through domain list. Download each one and remove commented lines (lines beginning with '# 'or '/') and # blank lines
for ((i = 0; i < "${#sources[@]}"; i++))
do
@ -149,7 +168,7 @@ function gravity_spinup() {
agent="Mozilla/10.0"
echo -n " Getting $domain list: "
echo -n "::: Getting $domain list..."
# Use a case statement to download lists that need special cURL commands
# to complete properly and reset the user agent when required
@ -172,50 +191,69 @@ function gravity_spinup() {
# Schwarzchild - aggregate domains to one list and add blacklisted domains
function gravity_Schwarzchild() {
echo "::: "
# Find all active domains and compile them into one file and remove CRs
echo "** Aggregating list of domains..."
truncate -s 0 $piholeDir/$matterandlight
echo -n "::: Aggregating list of domains..."
truncate -s 0 $piholeDir/$matterandlight & spinner $!
for i in "${activeDomains[@]}"
do
cat $i |tr -d '\r' >> $piholeDir/$matterandlight
done
echo " done!"
}
function gravity_Blacklist(){
# Append blacklist entries if they exist
blacklist.sh -f -nr -q
echo -n "::: Running blacklist script to update HOSTS file...."
blacklist.sh -f -nr -q > /dev/null & spinner $!
numBlacklisted=$(wc -l < "/etc/pihole/blacklist.txt")
plural=; [[ "$numBlacklisted" != "1" ]] && plural=s
echo " $numBlacklisted domain${plural} blacklisted!"
}
function gravity_Whitelist() {
echo ":::"
# Prevent our sources from being pulled into the hole
plural=; [[ "${sources[@]}" != "1" ]] && plural=s
echo "** Whitelisting ${#sources[@]} ad list source${plural}..."
echo -n "::: Adding ${#sources[@]} ad list source${plural} to the whitelist..."
urls=()
for url in ${sources[@]}
do
tmp=$(echo "$url" | awk -F '/' '{print $3}')
urls=("${urls[@]}" $tmp)
done
done & spinner $!
echo " done!"
whitelist.sh -f -nr -q ${urls[@]}
echo -n "::: Running whitelist script to update HOSTS file...."
whitelist.sh -f -nr -q ${urls[@]} > /dev/null & spinner $!
numWhitelisted=$(wc -l < "/etc/pihole/whitelist.txt")
plural=; [[ "$numWhitelisted" != "1" ]] && plural=s
echo " $numWhitelisted domain${plural} whitelisted!"
}
function gravity_unique() {
# Sort and remove duplicates
sort -u $piholeDir/$supernova > $piholeDir/$eventHorizon
echo -n "::: Removing duplicate domains...."
sort -u $piholeDir/$supernova > $piholeDir/$eventHorizon & spinner $!
echo " done!"
numberOf=$(wc -l < $piholeDir/$eventHorizon)
echo "** $numberOf unique domains trapped in the event horizon."
echo "::: $numberOf unique domains trapped in the event horizon."
}
function gravity_hostFormat() {
# Format domain list as "192.168.x.x domain.com"
echo "** Formatting domains into a HOSTS file..."
# Format domain list as "192.168.x.x domain.com"
echo "::: Formatting domains into a HOSTS file..."
# If there is a value in the $piholeIPv6, then IPv6 will be used, so the awk command modified to create a line for both protocols
if [[ -n $piholeIPv6 ]];then
cat $piholeDir/$eventHorizon | awk -v ipv4addr="$piholeIP" -v ipv6addr="$piholeIPv6" '{sub(/\r$/,""); print ipv4addr" "$0"\n"ipv6addr" "$0}' > $piholeDir/$accretionDisc
@ -248,26 +286,31 @@ function gravity_advanced() {
# Most of the lists downloaded are already in hosts file format but the spacing/formating is not contigious
# This helps with that and makes it easier to read
# It also helps with debugging so each stage of the script can be researched more in depth
awk '($1 !~ /^#/) { if (NF>1) {print $2} else {print $1}}' $piholeDir/$matterandlight | sed -nr -e 's/\.{2,}/./g' -e '/\./p' > $piholeDir/$supernova
echo -n "::: Formatting list of domains to remove comments...."
awk '($1 !~ /^#/) { if (NF>1) {print $2} else {print $1}}' $piholeDir/$matterandlight | sed -nr -e 's/\.{2,}/./g' -e '/\./p' > $piholeDir/$supernova & spinner $!
echo " done!"
numberOf=$(wc -l < $piholeDir/$supernova)
echo "** $numberOf domains being pulled in by gravity..."
echo "::: $numberOf domains being pulled in by gravity..."
gravity_unique
}
function gravity_reload() {
# Reload hosts file
echo "** Refresh lists in dnsmasq..."
echo ":::"
echo -n "::: Refresh lists in dnsmasq..."
dnsmasqPid=$(pidof dnsmasq)
if [[ $dnsmasqPid ]]; then
# service already running - reload config
$SUDO kill -HUP $dnsmasqPid
$SUDO kill -HUP $dnsmasqPid & spinner $!
else
# service not running, start it up
$SUDO service dnsmasq start
$SUDO service dnsmasq start & spinner $!
fi
echo " done!"
}