diff --git a/advanced/Scripts/blacklist.sh b/advanced/Scripts/blacklist.sh
index a289a9a5..feeca9da 100755
--- a/advanced/Scripts/blacklist.sh
+++ b/advanced/Scripts/blacklist.sh
@@ -10,22 +10,7 @@
 # the Free Software Foundation, either version 2 of the License, or
 # (at your option) any later version.
 
-#rootcheck
-if [[ $EUID -eq 0 ]];then
-	echo "::: You are root."
-else
-	echo "::: sudo will be used."
-	# Check if it is actually installed
-	# If it isn't, exit because the install cannot complete
-	if [ -x "$(command -v sudo)" ];then
-		export SUDO="sudo"
-	else
-		echo "::: Please install sudo or run this script as root."
-		exit 1
-	fi
-fi
-
-function helpFunc()
+helpFunc()
 {
 	echo "::: Immediately blacklists one or more domains in the hosts file"
 	echo ":::"
@@ -86,7 +71,7 @@ if [[ -f ${piholeIPv6file} ]];then
     piholeIPv6=$(ip -6 route get 2001:4860:4860::8888 | awk -F " " '{ for(i=1;i<=NF;i++) if ($i == "src") print $(i+1) }')
 fi
 
-function HandleOther(){
+HandleOther(){
   #check validity of domain
 	validDomain=$(echo "$1" | perl -ne'print if /\b((?=[a-z0-9-]{1,63}\.)(xn--)?[a-z0-9]+(-[a-z0-9]+)*\.)+[a-z]{2,63}\b/')
 	if [ -z "$validDomain" ]; then
@@ -96,7 +81,7 @@ function HandleOther(){
 	fi
 }
 
-function PopBlacklistFile(){
+PopBlacklistFile(){
 	#check blacklist file exists, and if not, create it
 	if [[ ! -f ${blacklist} ]];then
   	  touch ${blacklist}
@@ -110,7 +95,7 @@ function PopBlacklistFile(){
 	done
 }
 
-function AddDomain(){
+AddDomain(){
 #| sed 's/\./\\./g'
 	bool=false
 	grep -Ex -q "$1" ${blacklist} || bool=true
@@ -129,7 +114,7 @@ function AddDomain(){
 	fi
 }
 
-function RemoveDomain(){
+RemoveDomain(){
 
   bool=false
   grep -Ex -q "$1" ${blacklist} || bool=true
@@ -148,7 +133,7 @@ function RemoveDomain(){
   fi
 }
 
-function ModifyHostFile(){
+ModifyHostFile(){
 	 if ${addmode}; then
 	    #add domains to the hosts file
 	    if [[ -r ${blacklist} ]];then
@@ -178,7 +163,7 @@ function ModifyHostFile(){
 	fi
 }
 
-function Reload() {
+Reload() {
 	# Reload hosts file
 	echo ":::"
 	echo -n "::: Refresh lists in dnsmasq..."
@@ -187,15 +172,15 @@ function Reload() {
 
 	if [[ ${dnsmasqPid} ]]; then
 		# service already running - reload config
-		${SUDO} killall -s HUP dnsmasq
+		killall -s HUP dnsmasq
 	else
 		# service not running, start it up
-		${SUDO} service dnsmasq start
+		service dnsmasq start
 	fi
 	echo " done!"
 }
 
-function DisplayBlist() {
+DisplayBlist() {
 	verbose=false
 	echo -e " Displaying Gravity Affected Domains \n"
 	count=1
diff --git a/advanced/Scripts/chronometer.sh b/advanced/Scripts/chronometer.sh
index eae7cf1c..c03b4649 100755
--- a/advanced/Scripts/chronometer.sh
+++ b/advanced/Scripts/chronometer.sh
@@ -17,7 +17,7 @@ gravity="/etc/pihole/gravity.list"
 
 today=$(date "+%b %e")
 
-function CalcBlockedDomains(){
+CalcBlockedDomains(){
 	CheckIPv6
 	if [ -e "$gravity" ]; then
 		#Are we IPV6 or IPV4?
@@ -33,7 +33,7 @@ function CalcBlockedDomains(){
 	fi
 }
 
-function CalcQueriesToday(){
+CalcQueriesToday(){
 	if [ -e "$piLog" ];then
 		queriesToday=$(cat "$piLog" | grep "$today" | awk '/query/ {print $6}' | wc -l)
 	else
@@ -41,7 +41,7 @@ function CalcQueriesToday(){
 	fi
 }
 
-function CalcblockedToday(){
+CalcblockedToday(){
 	if [ -e "$piLog" ] && [ -e "$gravity" ];then
 		blockedToday=$(cat ${piLog} | awk '/\/etc\/pihole\/gravity.list/ && !/address/ {print $6}' | wc -l)
 	else
@@ -49,7 +49,7 @@ function CalcblockedToday(){
 	fi
 }
 
-function CalcPercentBlockedToday(){
+CalcPercentBlockedToday(){
 	if [ "$queriesToday" != "Err." ] && [ "$blockedToday" != "Err." ]; then
 		if [ "$queriesToday" != 0 ]; then #Fixes divide by zero error :)
 		 #scale 2 rounds the number down, so we'll do scale 4 and then trim the last 2 zeros
@@ -61,7 +61,7 @@ function CalcPercentBlockedToday(){
 	fi
 }
 
-function CheckIPv6(){
+CheckIPv6(){
 	piholeIPv6file="/etc/pihole/.useIPv6"
 	if [[ -f ${piholeIPv6file} ]];then
 	    # If the file exists, then the user previously chose to use IPv6 in the automated installer
@@ -69,7 +69,7 @@ function CheckIPv6(){
 	fi
 }
 
-function outputJSON(){
+outputJSON(){
 	CalcQueriesToday
 	CalcblockedToday
 	CalcPercentBlockedToday
@@ -79,7 +79,7 @@ function outputJSON(){
 	printf '{"domains_being_blocked":"%s","dns_queries_today":"%s","ads_blocked_today":"%s","ads_percentage_today":"%s"}\n' "$blockedDomainsTotal" "$queriesToday" "$blockedToday" "$percentBlockedToday"
 }
 
-function normalChrono(){
+normalChrono(){
 	for (( ; ; ))
 	do
 		clear
@@ -121,7 +121,7 @@ function normalChrono(){
 	done
 }
 
-function displayHelp(){
+displayHelp(){
  	echo "::: Displays stats about your piHole!"
     echo ":::"
     echo "::: Usage: sudo pihole -c [optional:-j]"
diff --git a/advanced/Scripts/setupLCD.sh b/advanced/Scripts/setupLCD.sh
index c77f1f4a..5ef324fe 100755
--- a/advanced/Scripts/setupLCD.sh
+++ b/advanced/Scripts/setupLCD.sh
@@ -11,21 +11,6 @@
 # (at your option) any later version.
 
 ############ FUNCTIONS ###########
-# Run this script as root or under sudo
-echo ":::"
-if [[ $EUID -eq 0 ]];then
-	echo "::: You are root."
-else
-	echo "::: sudo will be used."
-  # Check if it is actually installed
-  # If it isn't, exit because the install cannot complete
-  if [ -x "$(command -v sudo)" ];then
-		export SUDO="sudo"
-  else
-		echo "::: Please install sudo or run this script as root."
-    exit 1
-  fi
-fi
 
 # Borrowed from adafruit-pitft-helper < borrowed from raspi-config
 # https://github.com/adafruit/Adafruit-PiTFT-Helper/blob/master/adafruit-pitft-helper#L324-L334
@@ -45,11 +30,11 @@ getInitSys() {
 autoLoginPiToConsole() {
   if [ -e /etc/init.d/lightdm ]; then
     if [ ${SYSTEMD} -eq 1 ]; then
-      ${SUDO} systemctl set-default multi-user.target
-      ${SUDO} ln -fs /etc/systemd/system/autologin@.service /etc/systemd/system/getty.target.wants/getty@tty1.service
+      systemctl set-default multi-user.target
+      ln -fs /etc/systemd/system/autologin@.service /etc/systemd/system/getty.target.wants/getty@tty1.service
     else
-      ${SUDO} update-rc.d lightdm disable 2
-      ${SUDO} sed /etc/inittab -i -e "s/1:2345:respawn:\/sbin\/getty --noclear 38400 tty1/1:2345:respawn:\/bin\/login -f pi tty1 <\/dev\/tty1 >\/dev\/tty1 2>&1/"
+      update-rc.d lightdm disable 2
+      sed /etc/inittab -i -e "s/1:2345:respawn:\/sbin\/getty --noclear 38400 tty1/1:2345:respawn:\/bin\/login -f pi tty1 <\/dev\/tty1 >\/dev\/tty1 2>&1/"
       fi
   fi
 }
@@ -66,23 +51,23 @@ echo /usr/local/bin/chronometer.sh >> /home/pi/.bashrc
 
 # Set up the LCD screen based on Adafruits instuctions:
 # https://learn.adafruit.com/adafruit-pitft-28-inch-resistive-touchscreen-display-raspberry-pi/easy-install
-curl -SLs https://apt.adafruit.com/add-pin | ${SUDO} bash
-${SUDO} apt-get -y install raspberrypi-bootloader
-${SUDO} apt-get -y install adafruit-pitft-helper
-${SUDO} adafruit-pitft-helper -t 28r
+curl -SLs https://apt.adafruit.com/add-pin | bash
+apt-get -y install raspberrypi-bootloader
+apt-get -y install adafruit-pitft-helper
+adafruit-pitft-helper -t 28r
 
 # Download the cmdline.txt file that prevents the screen from going blank after a period of time
-${SUDO} mv /boot/cmdline.txt /boot/cmdline.orig
-${SUDO} curl -o /boot/cmdline.txt https://raw.githubusercontent.com/pi-hole/pi-hole/master/advanced/cmdline.txt
+mv /boot/cmdline.txt /boot/cmdline.orig
+curl -o /boot/cmdline.txt https://raw.githubusercontent.com/pi-hole/pi-hole/master/advanced/cmdline.txt
 
 # Back up the original file and download the new one
-${SUDO} mv /etc/default/console-setup /etc/default/console-setup.orig
-${SUDO} curl -o /etc/default/console-setup https://raw.githubusercontent.com/pi-hole/pi-hole/master/advanced/console-setup
+mv /etc/default/console-setup /etc/default/console-setup.orig
+curl -o /etc/default/console-setup https://raw.githubusercontent.com/pi-hole/pi-hole/master/advanced/console-setup
 
 # Instantly apply the font change to the LCD screen
-${SUDO} setupcon
+setupcon
 
-${SUDO} reboot
+reboot
 
 # Start showing the stats on the screen by running the command on another tty:
 # http://unix.stackexchange.com/questions/170063/start-a-process-on-a-different-tty
diff --git a/advanced/Scripts/whitelist.sh b/advanced/Scripts/whitelist.sh
index 75d62173..d6a09b35 100755
--- a/advanced/Scripts/whitelist.sh
+++ b/advanced/Scripts/whitelist.sh
@@ -10,22 +10,8 @@
 # the Free Software Foundation, either version 2 of the License, or
 # (at your option) any later version.
 
-#rootcheck
-if [[ $EUID -eq 0 ]];then
-	echo "::: You are root."
-else
-	echo "::: sudo will be used."
-	# Check if it is actually installed
-	# If it isn't, exit because the install cannot complete
-	if [ -x "$(command -v sudo)" ];then
-		export SUDO="sudo"
-	else
-		echo "::: Please install sudo or run this script as root."
-		exit 1
-	fi
-fi
 
-function helpFunc()
+helpFunc()
 {
 	echo "::: Immediately whitelists one or more domains in the hosts file"
 	echo ":::"
@@ -85,7 +71,7 @@ if [[ -f ${piholeIPv6file} ]];then
     piholeIPv6=$(ip -6 route get 2001:4860:4860::8888 | awk -F " " '{ for(i=1;i<=NF;i++) if ($i == "src") print $(i+1) }')
 fi
 
-function HandleOther(){
+HandleOther(){
   #check validity of domain
 	validDomain=$(echo "$1" | perl -ne'print if /\b((?=[a-z0-9-]{1,63}\.)(xn--)?[a-z0-9]+(-[a-z0-9]+)*\.)+[a-z]{2,63}\b/')
 	if [ -z "$validDomain" ]; then
@@ -95,7 +81,7 @@ function HandleOther(){
 	fi
 }
 
-function PopWhitelistFile(){
+PopWhitelistFile(){
 	#check whitelist file exists, and if not, create it
 	if [[ ! -f ${whitelist} ]];then
   	  touch ${whitelist}
@@ -110,7 +96,7 @@ function PopWhitelistFile(){
 	done
 }
 
-function AddDomain(){
+AddDomain(){
 #| sed 's/\./\\./g'
 	bool=false
 
@@ -132,7 +118,7 @@ function AddDomain(){
 	fi
 }
 
-function RemoveDomain(){
+RemoveDomain(){
 
   bool=false
   grep -Ex -q "$1" ${whitelist} || bool=true
@@ -151,7 +137,7 @@ function RemoveDomain(){
   fi
 }
 
-function ModifyHostFile(){
+ModifyHostFile(){
 	 if ${addmode}; then
 	    #remove domains in  from hosts file
 	    if [[ -r ${whitelist} ]];then
@@ -195,7 +181,7 @@ function ModifyHostFile(){
 	  fi
 }
 
-function Reload() {
+Reload() {
 	# Reload hosts file
 	echo ":::"
 	echo -n "::: Refresh lists in dnsmasq..."
@@ -203,15 +189,15 @@ function Reload() {
 
 	if [[ ${dnsmasqPid} ]]; then
 		# service already running - reload config
-		${SUDO} killall -s HUP dnsmasq
+		killall -s HUP dnsmasq
 	else
 		# service not running, start it up
-		${SUDO} service dnsmasq start
+		service dnsmasq start
 	fi
 	echo " done!"
 }
 
-function DisplayWlist() {
+DisplayWlist() {
 	verbose=false
 	echo -e " Displaying Gravity Resistant Domains \n"
 	count=1
@@ -251,4 +237,4 @@ fi
 
 if ${reload}; then
 	Reload
-fi
+fi
\ No newline at end of file
diff --git a/advanced/bash-completion/pihole b/advanced/bash-completion/pihole
index 2d6aafae..1fae988d 100644
--- a/advanced/bash-completion/pihole
+++ b/advanced/bash-completion/pihole
@@ -4,7 +4,7 @@ _pihole()
     COMPREPLY=()
     cur="${COMP_WORDS[COMP_CWORD]}"
     prev="${COMP_WORDS[COMP_CWORD-1]}"
-    opts="blacklist chronometer debug flush help query setupLCD uninstall updateDashboard updateGravity updatePihole version whitelist"
+    opts="blacklist chronometer debug flush help query reconfigure setupLCD uninstall updateGravity updatePihole version whitelist"
 
     COMPREPLY=( $(compgen -W "${opts}" -- ${cur}) )
     return 0
diff --git a/automated install/basic-install.sh b/automated install/basic-install.sh
index d7d9ca08..c09d0048 100755
--- a/automated install/basic-install.sh	
+++ b/automated install/basic-install.sh	
@@ -40,6 +40,11 @@ columns=$(tput cols)
 r=$(( rows / 2 ))
 c=$(( columns / 2 ))
 
+######## Undocumented Flags. Shhh ########
+skipSpaceCheck=false
+reconfigure=false
+runUnattended=false
+
 ######## FIRST CHECK ########
 # Must be root to install
 echo ":::"
@@ -864,13 +869,25 @@ View the web interface at http://pi.hole/admin or http://${IPv4_address%/*}/admi
 }
 
 update_dialogs(){
+    # reconfigure
+    if [ "$reconfigure" = true ]; then
+        opt1a="Repair"
+        opt1b="This will retain existing settings"
+        strAdd="You will remain on the same version"
+    else
+        opt1a="Update"
+        opt1b="This will retain existing settings."
+        strAdd="You will be updated to the latest version."
+    fi
+    opt2a="Reconfigure"
+    opt2b="This will allow you to enter new settings"
 
-  UpdateCmd=$(whiptail --title "Existing Install Detected!" --menu "\n\nWe have detected an existing install.\n\nPlease choose from the following options:" ${r} ${c} 2 \
-  "Update"  "Update install will retain existing settings." \
-  "Install"  "Install will allow you to enter new settings." 3>&2 2>&1 1>&3)
+    UpdateCmd=$(whiptail --title "Existing Install Detected!" --menu "\n\nWe have detected an existing install.\n\nPlease choose from the following options: \n($strAdd)" ${r} ${c} 2 \
+    "$opt1a"  "$opt1b" \
+    "$opt2a"  "$opt2b" 3>&2 2>&1 1>&3)
 
-  if [[ $? = 0 ]];then
-		case ${UpdateCmd} in
+    if [[ $? = 0 ]];then
+        case ${UpdateCmd} in
             Update)
                 echo "::: Updating existing install"
                 useUpdateVars=true
@@ -879,17 +896,28 @@ update_dialogs(){
                 echo "::: Running complete install script"
                 useUpdateVars=false
                 ;;
-	    esac
-	else
-		echo "::: Cancel selected. Exiting..."
-		exit 1
-	fi
+        esac
+    else
+        echo "::: Cancel selected. Exiting..."
+        exit 1
+    fi
 
 }
 
 main() {
+# Check arguments for the undocumented flags
+for var in "$@"
+do
+  case "$var" in
+    "--reconfigure"  ) reconfigure=true;;
+    "--i_do_not_follow_recommendations"   ) skipSpaceCheck=false;;
+    "--unattended"     ) runUnattended=true;;
+  esac
+done
+
 if [[ -f ${setupVars} ]];then
-  if [ "$1" == "pihole" ]; then
+  if [[ "${runUnattended}" == true ]]; then
+    echo "::: --unattended passed to install script, no whiptail dialogs will be displayed"
     useUpdateVars=true
   else
     update_dialogs
@@ -898,9 +926,8 @@ fi
 
 # Start the installer
 # Verify there is enough disk space for the install
-if [[ $1 = "--i_do_not_follow_recommendations" ]]; then
-    echo "::: --i_do_not_follow_recommendations passed to script"
-    echo "::: skipping free disk space verification!"
+if [[ "${skipSpaceCheck}" == true ]]; then
+    echo "::: --i_do_not_follow_recommendations passed to script, skipping free disk space verification!"
 else
     verifyFreeDiskSpace
 fi
@@ -917,6 +944,14 @@ install_dependent_packages INSTALLER_DEPS[@]
 # Install packages used by the Pi-hole
 install_dependent_packages PIHOLE_DEPS[@]
 
+if [[ "${reconfigure}" == true ]]; then
+    echo "::: --reconfigure passed to install script. Not downloading/updating local repos"
+else
+    # Get Git files for Core and Admin
+    getGitFiles ${piholeFilesDir} ${piholeGitUrl}
+    getGitFiles ${webInterfaceDir} ${webInterfaceGitUrl}
+fi
+
 if [[ ${useUpdateVars} == false ]]; then
     # Display welcome dialogs
     welcomeDialogs
@@ -924,9 +959,6 @@ if [[ ${useUpdateVars} == false ]]; then
     mkdir -p /etc/pihole/
     # Remove legacy scripts from previous storage location
     remove_legacy_scripts
-    # Get Git files for Core and Admin
-    getGitFiles ${piholeFilesDir} ${piholeGitUrl}
-    getGitFiles ${webInterfaceDir} ${webInterfaceGitUrl}
     # Stop resolver and webserver while installing proceses
     stop_service dnsmasq
     stop_service lighttpd
@@ -947,7 +979,7 @@ fi
 # Move the log file into /etc/pihole for storage
 mv ${tmpLog} ${instalLogLoc}
 
-if [[ ${useUpdateVars} == false ]]; then
+if [[ "${useUpdateVars}" == false ]]; then
     displayFinalMessage
 fi
 
@@ -960,7 +992,7 @@ enable_service lighttpd
 echo " done."
 
 echo ":::"
-if [[ ${useUpdateVars} == false ]]; then
+if [[ "${useUpdateVars}" == false ]]; then
     echo "::: Installation Complete! Configure your devices to use the Pi-hole as their DNS server using:"
     echo ":::     ${IPv4_address%/*}"
     echo ":::     $IPv6_address"
diff --git a/gravity.sh b/gravity.sh
index bcfcc9ee..5f0606b4 100755
--- a/gravity.sh
+++ b/gravity.sh
@@ -13,21 +13,7 @@
 # Run this script as root or under sudo
 echo ":::"
 
-if [[ $EUID -eq 0 ]];then
-	echo "::: You are root."
-else
-	echo "::: sudo will be used."
-	# Check if it is actually installed
-	# If it isn't, exit because the install cannot complete
-	if [ -x "$(command -v sudo)" ];then
-		export SUDO="sudo"
-	else
-		echo "::: Please install sudo or run this script as root."
-		exit 1
-	fi
-fi
-
-function helpFunc()
+helpFunc()
 {
 	echo "::: Pull in domains from adlists"
 	echo ":::"
@@ -46,7 +32,15 @@ whitelistScript=/opt/pihole/whitelist.sh
 blacklistScript=/opt/pihole/blacklist.sh
 
 #Source the setupVars from install script for the IP
-. /etc/pihole/setupVars.conf
+setupVars=/etc/pihole/setupVars.conf
+if [[ -f ${setupVars} ]];then
+    . /etc/pihole/setupVars.conf
+else
+    echo "::: WARNING: /etc/pihole/setupVars.conf missing. Possible installation failure."
+    echo ":::          Please run 'pihole -r', and choose the 'install' option to reconfigure."
+    exit 1
+fi
+
 #Remove the /* from the end of the IPv4addr.
 IPv4addr=${IPv4_address%/*}
 
@@ -60,15 +54,14 @@ supernova=${basename}.1.supernova.txt
 eventHorizon=${basename}.2.eventHorizon.txt
 accretionDisc=${basename}.3.accretionDisc.txt
 
-# After setting defaults, check if there's local overrides
+# Warn users still using pihole.conf that it no longer has any effect (I imagine about 2 people use it)
 if [[ -r ${piholeDir}/pihole.conf ]];then
-    echo "::: Local calibration requested..."
-        . ${piholeDir}/pihole.conf
+    echo "::: pihole.conf file no longer supported. Over-rides in this file are ignored."
 fi
 
 ###########################
 # collapse - begin formation of pihole
-function gravity_collapse() {
+gravity_collapse() {
 	echo "::: Neutrino emissions detected..."
 	echo ":::"
 	#Decide if we're using a custom ad block list, or defaults.
@@ -105,18 +98,18 @@ function gravity_collapse() {
         # Temporary hack to allow non-root access to pihole directory
         # Will update later, needed for existing installs, new installs should
         # create this directory as non-root
-        ${SUDO} chmod 777 ${piholeDir}
+        chmod 777 ${piholeDir}
         echo ":::"
         echo "::: Existing pihole directory found"
 	else
         echo "::: Creating pihole directory..."
         mkdir ${piholeDir}
-        ${SUDO} chmod 777 ${piholeDir}
+        chmod 777 ${piholeDir}
 	fi
 }
 
 # patternCheck - check to see if curl downloaded any new files.
-function gravity_patternCheck() {
+gravity_patternCheck() {
 	patternBuffer=$1
 	# check if the patternbuffer is a non-zero length file
 	if [[ -s "$patternBuffer" ]];then
@@ -132,7 +125,7 @@ function gravity_patternCheck() {
 }
 
 # transport - curl the specified url with any needed command extentions
-function gravity_transport() {
+gravity_transport() {
 	url=$1
 	cmd_ext=$2
 	agent=$3
@@ -154,7 +147,7 @@ function gravity_transport() {
 }
 
 # spinup - main gravity function
-function gravity_spinup() {
+gravity_spinup() {
 	echo ":::"
 	# Loop through domain list.  Download each one and remove commented lines (lines beginning with '# 'or '/') and	 		# blank lines
 	for ((i = 0; i < "${#sources[@]}"; i++))
@@ -191,7 +184,7 @@ function gravity_spinup() {
 }
 
 # Schwarzchild - aggregate domains to one list and add blacklisted domains
-function gravity_Schwarzchild() {
+gravity_Schwarzchild() {
 	echo "::: "
 	# Find all active domains and compile them into one file and remove CRs
 	echo -n "::: Aggregating list of domains..."
@@ -203,7 +196,7 @@ function gravity_Schwarzchild() {
 	echo " done!"
 }
 
-function gravity_Blacklist(){
+gravity_Blacklist(){
 	# Append blacklist entries if they exist
 	echo -n "::: Running blacklist script to update HOSTS file...."
 	${blacklistScript} -f -nr -q > /dev/null
@@ -213,7 +206,7 @@ function gravity_Blacklist(){
 	echo " $numBlacklisted domain${plural} blacklisted!"
 }
 
-function gravity_Whitelist() {
+gravity_Whitelist() {
 	echo ":::"
 	# Prevent our sources from being pulled into the hole
 	plural=; [[ "${sources[@]}" != "1" ]] && plural=s
@@ -234,7 +227,7 @@ function gravity_Whitelist() {
 	echo " $numWhitelisted domain${plural} whitelisted!"
 }
 
-function gravity_unique() {
+gravity_unique() {
 	# Sort and remove duplicates
 	echo -n "::: Removing duplicate domains...."
 	sort -u  ${piholeDir}/${supernova} > ${piholeDir}/${eventHorizon}
@@ -243,7 +236,7 @@ function gravity_unique() {
 	echo "::: $numberOf unique domains trapped in the event horizon."
 }
 
-function gravity_hostFormat() {
+gravity_hostFormat() {
 	# Format domain list as "192.168.x.x domain.com"
 	echo "::: Formatting domains into a HOSTS file..."
 	if [[ -f /etc/hostname ]]; then
@@ -270,7 +263,7 @@ function gravity_hostFormat() {
 }
 
 # blackbody - remove any remnant files from script processes
-function gravity_blackbody() {
+gravity_blackbody() {
 	# Loop through list files
 	for file in ${piholeDir}/*.${justDomainsExtension}
 	do
@@ -283,7 +276,7 @@ function gravity_blackbody() {
 	done
 }
 
-function gravity_advanced() {
+gravity_advanced() {
 	# Remove comments and print only the domain name
 	# Most of the lists downloaded are already in hosts file format but the spacing/formating is not contigious
 	# This helps with that and makes it easier to read
@@ -301,11 +294,11 @@ function gravity_advanced() {
 	gravity_unique
 }
 
-function gravity_reload() {
+gravity_reload() {
 	#Clear no longer needed files...
 	echo ":::"
 	echo -n "::: Cleaning up un-needed files..."
-	${SUDO} rm ${piholeDir}/pihole.*.txt
+	rm ${piholeDir}/pihole.*.txt
 	echo " done!"
 
 	# Reload hosts file
@@ -316,17 +309,17 @@ function gravity_reload() {
 	#First escape forward slashes in the path:
 	adList=${adList//\//\\\/}
 	#Now replace the line in dnsmasq file
-	${SUDO} sed -i "s/^addn-hosts.*/addn-hosts=$adList/" /etc/dnsmasq.d/01-pihole.conf
+	sed -i "s/^addn-hosts.*/addn-hosts=$adList/" /etc/dnsmasq.d/01-pihole.conf
 	dnsmasqPid=$(pidof dnsmasq)
 
-    find "$piholeDir" -type f -exec ${SUDO} chmod 666 {} \;
+    find "$piholeDir" -type f -exec chmod 666 {} \;
 
 	if [[ ${dnsmasqPid} ]]; then
 		# service already running - reload config
-		${SUDO} killall -s HUP dnsmasq
+		killall -s HUP dnsmasq
 	else
 		# service not running, start it up
-		${SUDO} service dnsmasq start
+		service dnsmasq start
 	fi
 	echo " done!"
 }
@@ -342,12 +335,12 @@ done
 
 if [[ ${forceGrav} == true ]]; then
 	echo -n "::: Deleting exising list cache..."
-	${SUDO} rm /etc/pihole/list.*
+	rm /etc/pihole/list.*
 	echo " done!"
 fi
 
 #Overwrite adlists.default from /etc/.pihole in case any changes have been made. Changes should be saved in /etc/adlists.list
-${SUDO} cp /etc/.pihole/adlists.default /etc/pihole/adlists.default
+cp /etc/.pihole/adlists.default /etc/pihole/adlists.default
 gravity_collapse
 gravity_spinup
 gravity_Schwarzchild
diff --git a/pihole b/pihole
index e0d1715a..4ed446be 100755
--- a/pihole
+++ b/pihole
@@ -12,43 +12,40 @@
 
 # Must be root to use this tool
 if [[ ! $EUID -eq 0 ]];then
-    #echo "::: You are root."
-#else
-    #echo "::: Sudo will be used for this tool."
-  # Check if it is actually installed
-  # If it isn't, exit because the pihole cannot be invoked without privileges.
-  if [ -x "$(command -v sudo)" ];then
-        export SUDO="sudo"
-  else
-    echo "::: Please install sudo or run this as root."
-    exit 1
-  fi
+    if [ -x "$(command -v sudo)" ];then
+        echo "::: Elevating to root with sudo"
+        exec sudo bash "$0" "$@"
+        exit $?
+    else
+        echo "::: sudo is needed to run pihole commands.  Please run this script as root or install sudo."
+        exit 1
+    fi
 fi
 
-function whitelistFunc {
+whitelistFunc() {
     shift
-    ${SUDO} /opt/pihole/whitelist.sh "$@"
-    exit 1
+    /opt/pihole/whitelist.sh "$@"
+    exit 0
 }
 
-function blacklistFunc {
+blacklistFunc() {
     shift
-    ${SUDO} /opt/pihole/blacklist.sh "$@"
-    exit 1
+    /opt/pihole/blacklist.sh "$@"
+    exit 0
 }
 
-function debugFunc {
-    ${SUDO} /opt/pihole/piholeDebug.sh
-    exit 1
+debugFunc() {
+    /opt/pihole/piholeDebug.sh
+    exit 0
 }
 
-function flushFunc {
-    ${SUDO} /opt/pihole/piholeLogFlush.sh
-    exit 1
+flushFunc() {
+    /opt/pihole/piholeLogFlush.sh
+    exit 0
 }
 
 
-function updatePiholeFunc {
+updatePiholeFunc() {
 
     if [ ! -d "/etc/.pihole" ]; then #This is unlikely
         echo "::: Critical Error: Pi-Hole repo missing from system!"
@@ -86,7 +83,7 @@ function updatePiholeFunc {
             echo ":::"
             echo "::: Fetching latest changes from GitHub..."
             cd /var/www/html/admin
-            ${SUDO} git pull origin master
+            git pull origin master
             echo ":::"
             echo "::: Pi-hole Web Admin has been updated to ${webVersion}"
             echo "::: See https://changes.pi-hole.net for details"
@@ -101,8 +98,8 @@ function updatePiholeFunc {
 
         echo "::: Fetching latest changes from GitHub..."
         cd /etc/.pihole
-        ${SUDO} git pull origin master
-        ${SUDO} /etc/.pihole/automated\ install/basic-install.sh pihole
+        git pull origin master
+        /etc/.pihole/automated\ install/basic-install.sh --unattended
 
         echo ":::"
         echo "::: Pi-hole has been updated to version ${piholeVersionLatest}"
@@ -113,20 +110,25 @@ function updatePiholeFunc {
         echo "::: See https://changes.pi-hole.net for details"
     fi
 
-    exit 1
+    exit 0
 }
 
-function updateGravityFunc {
-    ${SUDO} /opt/pihole/gravity.sh "$@"
-    exit 1
+reconfigurePiholeFunc() {
+    /etc/.pihole/automated\ install/basic-install.sh --reconfigure
+    exit 0;
 }
 
-function setupLCDFunction {
-    ${SUDO} /opt/pihole/setupLCD.sh
-    exit 1
+updateGravityFunc() {
+    /opt/pihole/gravity.sh "$@"
+    exit 0
 }
 
-function queryFunc {
+setupLCDFunction() {
+    /opt/pihole/setupLCD.sh
+    exit 0
+}
+
+queryFunc() {
     domain=$2
     for list in /etc/pihole/list.*
     do
@@ -137,27 +139,27 @@ function queryFunc {
         fi
         echo ""
     done
-    exit 1
+    exit 0
 }
 
-function chronometerFunc {
+chronometerFunc() {
     shift
-    ${SUDO} /opt/pihole/chronometer.sh "$@"
-    exit 1
+    /opt/pihole/chronometer.sh "$@"
+    exit 0
 }
 
 
-function uninstallFunc {
-    ${SUDO} /opt/pihole/uninstall.sh
-    exit 1
+uninstallFunc() {
+    /opt/pihole/uninstall.sh
+    exit 0
 }
 
-function versionFunc {
-    ${SUDO} /opt/pihole/version.sh
-    exit 1
+versionFunc() {
+    /opt/pihole/version.sh
+    exit 0
 }
 
-function helpFunc {
+helpFunc() {
     echo "::: Control all PiHole specific functions!"
     echo ":::"
     echo "::: Usage: pihole [options]"
@@ -176,7 +178,7 @@ function helpFunc {
     echo ":::  -v, version              Show current versions"
     echo ":::  -q, query                Query the adlists for a specific domain"
     echo ":::  uninstall                Uninstall Pi-Hole from your system :(!"
-    exit 1
+    exit 0
 }
 
 if [[ $# = 0 ]]; then
@@ -190,6 +192,7 @@ case "$1" in
 "-d" | "debug"				) debugFunc;;
 "-f" | "flush"				) flushFunc;;
 "-up" | "updatePihole"      ) updatePiholeFunc;;
+"-r"  | "reconfigure"       ) reconfigurePiholeFunc;;
 "-g" | "updateGravity"		) updateGravityFunc "$@";;
 "-s" | "setupLCD"			) setupLCDFunction;;
 "-c" | "chronometer"		) chronometerFunc "$@";;