Merge branch 'development' into dns-hostname-fixes

.pullapprove.yml

@@ -1,7 +1,7 @@
 approve_by_comment: true
 approve_regex: '^(Approved|:shipit:|:\+1:)'
 reject_regex: '^(Rejected|:-1:)'
-reset_on_push: true
+reset_on_push: false
 author_approval: required
 reviewers:
   members:

advanced/Scripts/piholeDebug.sh

@@ -338,7 +338,7 @@ function dumpPiHoleLog {
 # Anything to be done after capturing of pihole.log terminates
 function finalWork {
         echo "::: Finshed debugging!"
-    echo "::: The degug log can be uploaded to Termbin.com for easier sharing."
+    echo "::: The debug log can be uploaded to Termbin.com for easier sharing."
         read -r -p "::: Would you like to upload the log? [y/N] " response
     case ${response} in
         [yY][eE][sS]|[yY])

advanced/Scripts/updateDashboard.sh

@@ -1,69 +0,0 @@
-#!/usr/bin/env bash
-# Pi-hole: A black hole for Internet advertisements
-# (c) 2015, 2016 by Jacob Salmela
-# Network-wide ad blocking via your Raspberry Pi
-# http://pi-hole.net
-# Updates the Pi-hole web interface
-#
-# Pi-hole is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-
-WEB_INTERFACE_GIT_URL="https://github.com/pi-hole/AdminLTE.git"
-WEB_INTERFACE_DIR="/var/www/html/admin"
-
-main() {
-    prerequisites
-    if ! is_repo; then
-        make_repo
-    fi
-    update_repo
-}
-
-prerequisites() {
-
-    # must be root to update
-    if [[ $EUID -ne 0 ]]; then
-        sudo bash "$0" "$@"
-        exit $?
-    fi
-
-    # web interface must already exist. this is a (lazy)
-    # check to make sure pihole is actually installed.
-    if [ ! -d "$WEB_INTERFACE_DIR" ]; then
-        echo "$WEB_INTERFACE_DIR not found. Exiting."
-        exit 1
-    fi
-
-    if ! type "git" > /dev/null; then
-        apt-get -y install git
-    fi
-}
-
-is_repo() {
-    # if the web interface directory does not have a .git folder
-    # it means its using the master.zip archive from the install
-    # script.
-    if [ ! -d "$WEB_INTERFACE_DIR/.git" ]; then
-        return 1
-    fi
-    return 0
-}
-
-# removes the web interface installed from the master.zip archive and
-# replaces it with the current master branch from github
-make_repo() {
-    # remove the non-repod interface and clone the interface
-    rm -rf ${WEB_INTERFACE_DIR}
-    git clone "$WEB_INTERFACE_GIT_URL" "$WEB_INTERFACE_DIR"
-}
-
-# pulls the latest master branch from github
-update_repo() {
-    # pull the latest commits
-    cd "$WEB_INTERFACE_DIR"
-    git pull
-}
-
-main

advanced/pihole.cron

@@ -13,9 +13,8 @@
 #          Download any updates from the adlists
 59 1    * * 7   root    /usr/local/bin/pihole updateGravity
 
-# Pi-hole: Update the Web interface shortly after gravity runs
+# Pi-hole: Update Pi-hole! Uncomment to enable auto update
-#          This should also update the version number if it is changed in the dashboard repo
+#30 2    * * 7   root    /usr/local/bin/pihole updatePihole
-30 2    * * 7   root    /usr/local/bin/pihole updateDashboard
 
 # Pi-hole: Parse the log file before it is flushed and save the stats to a database
 #          This will be used for a historical view of your Pi-hole's performance

automated install/basic-install.sh

@@ -67,7 +67,7 @@ if [ -x "$(command -v apt-get)" ];then
 	PKG_INSTALL="$PKG_MANAGER --yes --quiet install"
 	PKG_COUNT="$PKG_MANAGER -s -o Debug::NoLocking=true upgrade | grep -c ^Inst"
 	INSTALLER_DEPS=( apt-utils whiptail dhcpcd5)
-	PIHOLE_DEPS=( dnsutils bc dnsmasq lighttpd php5-common php5-cgi php5 git curl unzip wget sudo netcat )
+	PIHOLE_DEPS=( dnsutils bc dnsmasq lighttpd php5-common php5-cgi php5 git curl unzip wget sudo netcat cron )
 	LIGHTTPD_USER="www-data"
 	LIGHTTPD_GROUP="www-data"
 	LIGHTTPD_CFG="lighttpd.conf.debian"
@@ -195,7 +195,6 @@ chooseInterface() {
 		do
 			piholeInterface=${desiredInterface}
 			echo "::: Using interface: $piholeInterface"
-			echo "${piholeInterface}" > /tmp/piholeINT
 		done
 	else
 		echo "::: Cancel selected, exiting...."
@@ -204,13 +203,6 @@ chooseInterface() {
 
 }
 
-cleanupIPv6() {
-	# Removes IPv6 indicator file if we are not using IPv6
-	if [ -f "/etc/pihole/.useIPv6" ] && [ ! "$useIPv6" ]; then
-		rm /etc/pihole/.useIPv6
-	fi
-}
-
 use4andor6() {
 	# Let use select IPv4 and/or IPv6
 	cmd=(whiptail --separate-output --checklist "Select Protocols (press space to select)" ${r} ${c} 2)
@@ -249,7 +241,7 @@ use4andor6() {
 			echo "::: Exiting"
 			exit 1
 		fi
-		cleanupIPv6
+
 	else
 		echo "::: Cancel selected. Exiting..."
 		exit 1
@@ -260,8 +252,6 @@ useIPv6dialog() {
 	# Show the IPv6 address used for blocking
 	piholeIPv6=$(ip -6 route get 2001:4860:4860::8888 | awk -F " " '{ for(i=1;i<=NF;i++) if ($i == "src") print $(i+1) }')
 	whiptail --msgbox --backtitle "IPv6..." --title "IPv6 Supported" "$piholeIPv6 will be used to block ads." ${r} ${c}
-
-	${SUDO} touch /etc/pihole/.useIPv6
 }
 
 getStaticIPv4Settings() {
@@ -273,8 +263,6 @@ getStaticIPv4Settings() {
 		whiptail --msgbox --backtitle "IP information" --title "FYI: IP Conflict" "It is possible your router could still try to assign this IP to a device, which would cause a conflict.  But in most cases the router is smart enough to not do that.
 If you are worried, either manually set the address, or modify the DHCP reservation pool so it does not include the IP you want.
 It is also possible to use a DHCP reservation, but if you are going to do that, you might as well set a static address." ${r} ${c}
-		#piholeIP is saved to a permanent file so gravity.sh can use it when updating
-		${SUDO} echo "${IPv4addr%/*}" > /etc/pihole/piholeIP
 		# Nothing else to do since the variables are already set above
 	else
 		# Otherwise, we need to ask the user to input their desired settings.
@@ -294,10 +282,6 @@ It is also possible to use a DHCP reservation, but if you are going to do that,
 				if (whiptail --backtitle "Calibrating network interface" --title "Static IP Address" --yesno "Are these settings correct?
 					IP address:    $IPv4addr
 					Gateway:       $IPv4gw" ${r} ${c}); then
-					# If the settings are correct, then we need to set the piholeIP
-					# Saving it to a temporary file us to retrieve it later when we run the gravity.sh script. piholeIP is saved to a permanent file so gravity.sh can use it when updating
-					$SUDO echo "${IPv4addr%/*}" > /etc/pihole/piholeIP
-					$SUDO echo "$piholeInterface" > /tmp/piholeINT
 					# After that's done, the loop ends and we move on
 					ipSettingsCorrect=True
 				else
@@ -546,11 +530,10 @@ installScripts() {
 	${SUDO} cp /etc/.pihole/advanced/Scripts/blacklist.sh /opt/pihole/blacklist.sh
 	${SUDO} cp /etc/.pihole/advanced/Scripts/piholeDebug.sh /opt/pihole/piholeDebug.sh
 	${SUDO} cp /etc/.pihole/advanced/Scripts/piholeLogFlush.sh /opt/pihole/piholeLogFlush.sh
-	${SUDO} cp /etc/.pihole/advanced/Scripts/updateDashboard.sh /opt/pihole/updateDashboard.sh
 	${SUDO} cp /etc/.pihole/automated\ install/uninstall.sh /opt/pihole/uninstall.sh
 	${SUDO} cp /etc/.pihole/advanced/Scripts/setupLCD.sh /opt/pihole/setupLCD.sh
 	${SUDO} cp /etc/.pihole/advanced/Scripts/version.sh /opt/pihole/version.sh
-	${SUDO} chmod 755 /opt/pihole/gravity.sh /opt/pihole/chronometer.sh /opt/pihole/whitelist.sh /opt/pihole/blacklist.sh /opt/pihole/piholeLogFlush.sh /opt/pihole/updateDashboard.sh /opt/pihole/uninstall.sh /opt/pihole/setupLCD.sh /opt/pihole/version.sh
+	${SUDO} chmod 755 /opt/pihole/gravity.sh /opt/pihole/chronometer.sh /opt/pihole/whitelist.sh /opt/pihole/blacklist.sh /opt/pihole/piholeLogFlush.sh /opt/pihole/uninstall.sh /opt/pihole/setupLCD.sh /opt/pihole/version.sh
 	${SUDO} cp /etc/.pihole/pihole /usr/local/bin/pihole
 	${SUDO} chmod 755 /usr/local/bin/pihole
 	${SUDO} cp /etc/.pihole/advanced/bash-completion/pihole /etc/bash_completion.d/pihole

gravity.sh

@@ -39,44 +39,26 @@ function helpFunc()
 	exit 1
 }
 
-piholeIPfile=/etc/pihole/piholeIP
-piholeIPv6file=/etc/pihole/.useIPv6
 
 adListFile=/etc/pihole/adlists.list
 adListDefault=/etc/pihole/adlists.default
 whitelistScript=/opt/pihole/whitelist.sh
 blacklistScript=/opt/pihole/blacklist.sh
 
-if [[ -f ${piholeIPfile} ]];then
+#Source the setupVars from install script for the IP
-    # If the file exists, it means it was exported from the installation script and we should use that value instead of detecting it in this script
+. /etc/pihole/setupVars.conf
-    piholeIP=$(cat ${piholeIPfile})
+#Remove the /* from the end of the IPv4addr.
-    #rm $piholeIPfile
+IPv4addr=${IPv4addr%/*}
-else
-    # Otherwise, the IP address can be taken directly from the machine, which will happen when the script is run by the user and not the installation script
-    IPv4dev=$(ip route get 8.8.8.8 | awk '{for(i=1;i<=NF;i++)if($i~/dev/)print $(i+1)}')
-    piholeIPCIDR=$(ip -o -f inet addr show dev "$IPv4dev" | awk '{print $4}' | awk 'END {print}')
-    piholeIP=${piholeIPCIDR%/*}
-fi
-
-if [[ -f ${piholeIPv6file} ]];then
-    # If the file exists, then the user previously chose to use IPv6 in the automated installer
-    piholeIPv6=$(ip -6 route get 2001:4860:4860::8888 | awk -F " " '{ for(i=1;i<=NF;i++) if ($i == "src") print $(i+1) }')
-fi
 
 # Variables for various stages of downloading and formatting the list
-## Nate 3/26/2016 - Commented unused variables
 basename=pihole
 piholeDir=/etc/${basename}
 adList=${piholeDir}/gravity.list
-#blacklist=$piholeDir/blacklist.txt
-#whitelist=$piholeDir/whitelist.txt
-#latentWhitelist=$piholeDir/latentWhitelist.txt
 justDomainsExtension=domains
-matterandlight=${basename}.0.matterandlight.txt
+matterAndLight=${basename}.0.matterandlight.txt
 supernova=${basename}.1.supernova.txt
 eventHorizon=${basename}.2.eventHorizon.txt
 accretionDisc=${basename}.3.accretionDisc.txt
-#eyeOfTheNeedle=$basename.4.wormhole.txt
 
 # After setting defaults, check if there's local overrides
 if [[ -r ${piholeDir}/pihole.conf ]];then
@@ -213,10 +195,10 @@ function gravity_Schwarzchild() {
 	echo "::: "
 	# Find all active domains and compile them into one file and remove CRs
 	echo -n "::: Aggregating list of domains..."
-	truncate -s 0 ${piholeDir}/${matterandlight}
+	truncate -s 0 ${piholeDir}/${matterAndLight}
 	for i in "${activeDomains[@]}"
 	do
-		cat "$i" | tr -d '\r' >> ${piholeDir}/${matterandlight}
+		cat "$i" | tr -d '\r' >> ${piholeDir}/${matterAndLight}
 	done
 	echo " done!"
 }
@@ -274,13 +256,13 @@ function gravity_hostFormat() {
 	# If there is a value in the $piholeIPv6, then IPv6 will be used, so the awk command modified to create a line for both protocols
 	if [[ -n ${piholeIPv6} ]];then
 		# Add hostname and dummy domain to the top of gravity.list to make ping result return a friendlier looking domain! Also allows for an easy way to access the Pi-hole admin console (pi.hole/admin)
-		echo -e "$piholeIP $hostname\n$piholeIPv6 $hostname\n$piholeIP pi.hole\n$piholeIPv6 pi.hole" > ${piholeDir}/${accretionDisc}
+		echo -e "$IPv4addr $hostname\n$piholeIPv6 $hostname\n$IPv4addr pi.hole\n$piholeIPv6 pi.hole" > ${piholeDir}/${accretionDisc}
-		cat ${piholeDir}/${eventHorizon} | awk -v ipv4addr="$piholeIP" -v ipv6addr="$piholeIPv6" '{sub(/\r$/,""); print ipv4addr" "$0"\n"ipv6addr" "$0}' >> ${piholeDir}/${accretionDisc}
+		cat ${piholeDir}/${eventHorizon} | awk -v ipv4addr="$IPv4addr" -v ipv6addr="$piholeIPv6" '{sub(/\r$/,""); print ipv4addr" "$0"\n"ipv6addr" "$0}' >> ${piholeDir}/${accretionDisc}
 	else
 		# Otherwise, just create gravity.list as normal using IPv4
 		# Add hostname and dummy domain to the top of gravity.list to make ping result return a friendlier looking domain! Also allows for an easy way to access the Pi-hole admin console (pi.hole/admin)
-		echo -e "$piholeIP $hostname\n$piholeIP pi.hole" > ${piholeDir}/${accretionDisc}
+		echo -e "$IPv4addr $hostname\n$IPv4addr pi.hole" > ${piholeDir}/${accretionDisc}
-		cat ${piholeDir}/${eventHorizon} | awk -v ipv4addr="$piholeIP" '{sub(/\r$/,""); print ipv4addr" "$0}' >> ${piholeDir}/${accretionDisc}
+		cat ${piholeDir}/${eventHorizon} | awk -v ipv4addr="$IPv4addr" '{sub(/\r$/,""); print ipv4addr" "$0}' >> ${piholeDir}/${accretionDisc}
 	fi
 
 	# Copy the file over as /etc/pihole/gravity.list so dnsmasq can use it
@@ -307,7 +289,7 @@ function gravity_advanced() {
 	# This helps with that and makes it easier to read
 	# It also helps with debugging so each stage of the script can be researched more in depth
 	echo -n "::: Formatting list of domains to remove comments...."
-	awk '($1 !~ /^#/) { if (NF>1) {print $2} else {print $1}}' ${piholeDir}/${matterandlight} | sed -nr -e 's/\.{2,}/./g' -e '/\./p' >  ${piholeDir}/${supernova}
+	awk '($1 !~ /^#/) { if (NF>1) {print $2} else {print $1}}' ${piholeDir}/${matterAndLight} | sed -nr -e 's/\.{2,}/./g' -e '/\./p' >  ${piholeDir}/${supernova}
 	echo " done!"
 
 	numberOf=$(wc -l < ${piholeDir}/${supernova})
@@ -355,14 +337,13 @@ do
   esac
 done
 
-#Overwrite adlists.default from /etc/.pihole in case any changes have been made. Changes should be saved in /etc/adlists.list
-
 if [[ ${forceGrav} == true ]]; then
 	echo -n "::: Deleting exising list cache..."
 	${SUDO} rm /etc/pihole/list.*
 	echo " done!"
 fi
 
+#Overwrite adlists.default from /etc/.pihole in case any changes have been made. Changes should be saved in /etc/adlists.list
 ${SUDO} cp /etc/.pihole/adlists.default /etc/pihole/adlists.default
 gravity_collapse
 gravity_spinup

pihole

@@ -47,16 +47,60 @@ function flushFunc {
     exit 1
 }
 
-function updateDashboardFunc {
-    ${SUDO} /opt/pihole/updateDashboard.sh
-    exit 1
-}
 
 function updatePiholeFunc {
-    echo "::: Fetching latest changes from Github..."
+    echo "::: Checking for updates..."
-    cd /etc/.pihole
+    piholeVersion=$(cd /etc/.pihole/ && git describe --tags --abbrev=0)
-    ${SUDO} git pull
+    piholeVersionLatest=$(curl -s https://api.github.com/repos/pi-hole/pi-hole/releases/latest | grep -Po '"tag_name":.*?[^\\]",' |  perl -pe 's/"tag_name": "//; s/^"//; s/",$//')
-    ${SUDO} /etc/.pihole/automated\ install/basic-install.sh pihole
+
+    webVersion=$(cd /var/www/html/admin/ && git describe --tags --abbrev=0)
+    webVersionLatest=$(curl -s https://api.github.com/repos/pi-hole/AdminLTE/releases/latest | grep -Po '"tag_name":.*?[^\\]",' |  perl -pe 's/"tag_name": "//; s/^"//; s/",$//')
+
+    echo "::: Pi-hole version is $piholeVersion (Latest version is $piholeVersionLatest)"
+    echo "::: Web Admin version is $webVersion (Latest version is $webVersionLatest)"
+    echo ":::"
+
+    if [[ ${piholeVersion} == ${piholeVersionLatest} ]] ; then
+        echo "::: Pi-hole Base files are already up to date! Version: ${piholeVersionLatest}"
+        echo "::: No need to update!"
+        echo ":::"
+
+        if [[ ${webVersion} == ${webVersionLatest} ]] ; then
+            echo "::: Web Admin files are already up to date!"
+            echo "::: No need to update!"
+            echo ":::"
+        else
+            echo "::: An Update is available for the Web Admin!"
+            echo ":::"
+            echo "::: Fetching latest changes from GitHub..."
+            cd /var/www/html/admin
+            ${SUDO} git pull origin master
+            echo ":::"
+            echo "::: Pi-hole Web Admin has been updated to ${webVersion}"
+            echo "::: See https://changes.pi-hole.net for details"
+        fi
+    else
+        echo -n "::: An update is available for "
+        if [[ ${webVersion} == ${webVersionLatest} ]] ; then
+            echo " Pi-Hole!"
+        else
+            echo " Pi-Hole base files and the Web Admin. Both will be updated!"
+        fi
+
+        echo "::: Fetching latest changes from GitHub..."
+        cd /etc/.pihole
+        ${SUDO} git pull origin master
+        ${SUDO} /etc/.pihole/automated\ install/basic-install.sh pihole
+
+        echo ":::"
+        echo "::: Pi-hole has been updated to version ${piholeVersionLatest}"
+        if [[ ${webVersion} != ${webVersionLatest} ]] ; then
+            echo "::: Web Admin has been updated to version ${webVersionLatest}"
+        fi
+        echo ":::"
+        echo "::: See https://changes.pi-hole.net for details"
+    fi
+
     exit 1
 }
 
@@ -112,8 +156,7 @@ function helpFunc {
     echo ":::  -b, blacklist            Blacklist domains"
     echo ":::  -d, debug                Start a debugging session if having trouble"
     echo ":::  -f, flush                Flush the pihole.log file"
-    echo ":::  -ud, updateDashboard      Update the web dashboard manually"
+    echo ":::  -up, updatePihole        Update Pi-hole"
-    echo ":::  -up, updatePihole           Update Pi-hole"
     echo ":::  -g, updateGravity        Update the list of ad-serving domains"
     echo ":::  -s, setupLCD             Automatically configures the Pi to use the 2.8 LCD screen to display stats on it"
     echo ":::  -c, chronometer          Calculates stats and displays to an LCD"
@@ -134,7 +177,6 @@ case "$1" in
 "-b" | "blacklist"			) blacklistFunc "$@";;
 "-d" | "debug"				) debugFunc;;
 "-f" | "flush"				) flushFunc;;
-"-ud" | "updateDashboard"	) updateDashboardFunc;;
 "-up" | "updatePihole"      ) updatePiholeFunc;;
 "-g" | "updateGravity"		) updateGravityFunc "$@";;
 "-s" | "setupLCD"			) setupLCDFunction;;