You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
pi-hole/pihole

585 lines
18 KiB

#!/usr/bin/env bash
8 years ago
# Pi-hole: A black hole for Internet advertisements
# (c) 2017 Pi-hole, LLC (https://pi-hole.net)
# Network-wide ad blocking via your own hardware.
#
8 years ago
# Controller for all pihole scripts and functions.
#
# This file is copyright under the latest version of the EUPL.
# Please see LICENSE file for your rights under this license.
readonly PI_HOLE_SCRIPT_DIR="/opt/pihole"
# setupVars and PI_HOLE_BIN_DIR are not readonly here because in some functions (checkout),
# they might get set again when the installer is sourced. This causes an
# error due to modifying a readonly variable.
setupVars="/etc/pihole/setupVars.conf"
PI_HOLE_BIN_DIR="/usr/local/bin"
readonly colfile="${PI_HOLE_SCRIPT_DIR}/COL_TABLE"
source "${colfile}"
utilsfile="${PI_HOLE_SCRIPT_DIR}/utils.sh"
source "${utilsfile}"
versionsfile="/etc/pihole/versions"
if [ -f "${versionsfile}" ]; then
# Only source versionsfile if the file exits
# fixes a warning during installation where versionsfile does not exist yet
# but gravity calls `pihole -status` and thereby sourcing the file
source "${versionsfile}"
fi
7 years ago
webpageFunc() {
source "${PI_HOLE_SCRIPT_DIR}/webpage.sh"
main "$@"
7 years ago
exit 0
}
listFunc() {
"${PI_HOLE_SCRIPT_DIR}"/list.sh "$@"
exit 0
}
debugFunc() {
local automated
local web
local check_database_integrity
# Pull off the `debug` leaving passed call augmentation flags in $1
shift
for value in "$@"; do
[[ "$value" == *"-a"* ]] && automated="true"
[[ "$value" == *"-w"* ]] && web="true"
[[ "$value" == *"-c"* ]] && check_database_integrity="true"
[[ "$value" == *"--check_database"* ]] && check_database_integrity="true"
done
AUTOMATED=${automated:-} WEBCALL=${web:-} CHECK_DATABASE=${check_database_integrity:-} "${PI_HOLE_SCRIPT_DIR}"/piholeDebug.sh
8 years ago
exit 0
8 years ago
}
flushFunc() {
"${PI_HOLE_SCRIPT_DIR}"/piholeLogFlush.sh "$@"
8 years ago
exit 0
8 years ago
}
arpFunc() {
"${PI_HOLE_SCRIPT_DIR}"/piholeARPTable.sh "$@"
exit 0
}
updatePiholeFunc() {
if [ -n "${DOCKER_VERSION}" ]; then
unsupportedFunc
else
shift
"${PI_HOLE_SCRIPT_DIR}"/update.sh "$@"
exit 0
fi
8 years ago
}
reconfigurePiholeFunc() {
if [ -n "${DOCKER_VERSION}" ]; then
unsupportedFunc
else
/etc/.pihole/automated\ install/basic-install.sh --reconfigure
exit 0;
fi
}
updateGravityFunc() {
exec "${PI_HOLE_SCRIPT_DIR}"/gravity.sh "$@"
8 years ago
}
queryFunc() {
shift
"${PI_HOLE_SCRIPT_DIR}"/query.sh "$@"
8 years ago
exit 0
8 years ago
}
chronometerFunc() {
8 years ago
shift
"${PI_HOLE_SCRIPT_DIR}"/chronometer.sh "$@"
8 years ago
exit 0
8 years ago
}
uninstallFunc() {
if [ -n "${DOCKER_VERSION}" ]; then
unsupportedFunc
else
"${PI_HOLE_SCRIPT_DIR}"/uninstall.sh
exit 0
fi
8 years ago
}
versionFunc() {
8 years ago
shift
exec "${PI_HOLE_SCRIPT_DIR}"/version.sh "$@"
8 years ago
}
restartDNS() {
local svcOption svc str output status pid icon FTL_PID_FILE
svcOption="${1:-restart}"
# get the current path to the pihole-FTL.pid
FTL_PID_FILE="$(getFTLPIDFile)"
# Determine if we should reload or restart
if [[ "${svcOption}" =~ "reload-lists" ]]; then
# Reloading of the lists has been requested
# Note 1: This will NOT re-read any *.conf files
# Note 2: We cannot use killall here as it does
# not know about real-time signals
pid="$(getFTLPID ${FTL_PID_FILE})"
if [[ "$pid" -eq "-1" ]]; then
svc="true"
str="FTL is not running"
icon="${INFO}"
else
svc="kill -RTMIN ${pid}"
str="Reloading DNS lists"
icon="${TICK}"
fi
elif [[ "${svcOption}" =~ "reload" ]]; then
# Reloading of the DNS cache has been requested
# Note: This will NOT re-read any *.conf files
pid="$(getFTLPID ${FTL_PID_FILE})"
if [[ "$pid" -eq "-1" ]]; then
svc="true"
str="FTL is not running"
icon="${INFO}"
else
svc="kill -HUP ${pid}"
str="Flushing DNS cache"
icon="${TICK}"
fi
else
# A full restart has been requested
svc="service pihole-FTL restart"
str="Restarting DNS server"
icon="${TICK}"
fi
# Print output to Terminal, but not to Web Admin
[[ -t 1 ]] && echo -ne " ${INFO} ${str}..."
output=$( { ${svc}; } 2>&1 )
status="$?"
if [[ "${status}" -eq 0 ]]; then
[[ -t 1 ]] && echo -e "${OVER} ${icon} ${str}"
return 0
else
[[ ! -t 1 ]] && local OVER=""
echo -e "${OVER} ${CROSS} ${output}"
return 1
fi
}
piholeEnable() {
if [[ "${2}" == "-h" ]] || [[ "${2}" == "--help" ]]; then
echo "Usage: pihole disable [time]
Example: 'pihole disable', or 'pihole disable 5m'
Disable Pi-hole subsystems
Time:
#s Disable Pi-hole functionality for # second(s)
#m Disable Pi-hole functionality for # minute(s)"
exit 0
elif [[ "${1}" == "0" ]]; then
# Disable Pi-hole
if grep -cq "BLOCKING_ENABLED=false" "${setupVars}"; then
echo -e " ${INFO} Blocking already disabled, nothing to do"
exit 0
fi
if [[ $# > 1 ]]; then
local error=false
if [[ "${2}" == *"s" ]]; then
tt=${2%"s"}
if [[ "${tt}" =~ ^-?[0-9]+$ ]];then
local str="Disabling blocking for ${tt} seconds"
echo -e " ${INFO} ${str}..."
local str="Blocking will be re-enabled in ${tt} seconds"
nohup "${PI_HOLE_SCRIPT_DIR}"/pihole-reenable.sh ${tt} </dev/null &>/dev/null &
else
local error=true
fi
elif [[ "${2}" == *"m" ]]; then
tt=${2%"m"}
if [[ "${tt}" =~ ^-?[0-9]+$ ]];then
local str="Disabling blocking for ${tt} minutes"
echo -e " ${INFO} ${str}..."
local str="Blocking will be re-enabled in ${tt} minutes"
tt=$((${tt}*60))
nohup "${PI_HOLE_SCRIPT_DIR}"/pihole-reenable.sh ${tt} </dev/null &>/dev/null &
else
local error=true
fi
elif [[ -n "${2}" ]]; then
local error=true
else
echo -e " ${INFO} Disabling blocking"
fi
if [[ ${error} == true ]];then
echo -e " ${COL_LIGHT_RED}Unknown format for delayed reactivation of the blocking!${COL_NC}"
echo -e " Try 'pihole disable --help' for more information."
exit 1
fi
local str="Pi-hole Disabled"
addOrEditKeyValPair "${setupVars}" "BLOCKING_ENABLED" "false"
fi
else
# Enable Pi-hole
killall -q pihole-reenable
if grep -cq "BLOCKING_ENABLED=true" "${setupVars}"; then
echo -e " ${INFO} Blocking already enabled, nothing to do"
exit 0
fi
echo -e " ${INFO} Enabling blocking"
local str="Pi-hole Enabled"
addOrEditKeyValPair "${setupVars}" "BLOCKING_ENABLED" "true"
fi
restartDNS reload-lists
echo -e "${OVER} ${TICK} ${str}"
}
piholeLogging() {
shift
if [[ "${1}" == "-h" ]] || [[ "${1}" == "--help" ]]; then
echo "Usage: pihole logging [options]
Example: 'pihole logging on'
Specify whether the Pi-hole log should be used
Options:
on Enable the Pi-hole log at /var/log/pihole/pihole.log
off Disable and flush the Pi-hole log at /var/log/pihole/pihole.log
off noflush Disable the Pi-hole log at /var/log/pihole/pihole.log"
exit 0
elif [[ "${1}" == "off" ]]; then
# Disable logging
removeKey /etc/dnsmasq.d/01-pihole.conf "log-queries"
addOrEditKeyValPair "${setupVars}" "QUERY_LOGGING" "false"
if [[ "${2}" != "noflush" ]]; then
# Flush logs
"${PI_HOLE_BIN_DIR}"/pihole -f
fi
echo -e " ${INFO} Disabling logging..."
local str="Logging has been disabled!"
elif [[ "${1}" == "on" ]]; then
# Enable logging
addKey /etc/dnsmasq.d/01-pihole.conf "log-queries"
addOrEditKeyValPair "${setupVars}" "QUERY_LOGGING" "true"
echo -e " ${INFO} Enabling logging..."
local str="Logging has been enabled!"
else
echo -e " ${COL_LIGHT_RED}Invalid option${COL_NC}
Try 'pihole logging --help' for more information."
exit 1
fi
restartDNS
echo -e "${OVER} ${TICK} ${str}"
}
analyze_ports() {
local lv4 lv6 port=${1}
# FTL is listening at least on at least one port when this
# function is getting called
# Check individual address family/protocol combinations
# For a healthy Pi-hole, they should all be up (nothing printed)
lv4="$(ss --ipv4 --listening --numeric --tcp --udp src :${port})"
if grep -q "udp " <<< "${lv4}"; then
echo -e " ${TICK} UDP (IPv4)"
else
echo -e " ${CROSS} UDP (IPv4)"
fi
if grep -q "tcp " <<< "${lv4}"; then
echo -e " ${TICK} TCP (IPv4)"
else
echo -e " ${CROSS} TCP (IPv4)"
fi
lv6="$(ss --ipv6 --listening --numeric --tcp --udp src :${port})"
if grep -q "udp " <<< "${lv6}"; then
echo -e " ${TICK} UDP (IPv6)"
else
echo -e " ${CROSS} UDP (IPv6)"
fi
if grep -q "tcp " <<< "${lv6}"; then
echo -e " ${TICK} TCP (IPv6)"
else
echo -e " ${CROSS} TCP (IPv6)"
fi
echo ""
}
statusFunc() {
# Determine if there is pihole-FTL service is listening
local pid port ftl_api_port ftl_pid_file
ftl_pid_file="$(getFTLPIDFile)"
pid="$(getFTLPID ${ftl_pid_file})"
ftl_api_port="$(getFTLAPIPort)"
if [[ "$pid" -eq "-1" ]]; then
case "${1}" in
"web") echo "-1";;
*) echo -e " ${CROSS} DNS service is NOT running";;
esac
return 0
else
#get the DNS port pihole-FTL is listening on by using FTL's telnet API
port="$(echo ">dns-port >quit" | nc 127.0.0.1 "$ftl_api_port")"
if [[ "${port}" == "0" ]]; then
case "${1}" in
"web") echo "-1";;
*) echo -e " ${CROSS} DNS service is NOT listening";;
esac
return 0
else
if [[ "${1}" != "web" ]]; then
echo -e " ${TICK} FTL is listening on port ${port}"
analyze_ports "${port}"
fi
fi
fi
# Determine if Pi-hole's blocking is enabled
if grep -q "BLOCKING_ENABLED=false" /etc/pihole/setupVars.conf; then
# A config is commented out
case "${1}" in
"web") echo 0;;
*) echo -e " ${CROSS} Pi-hole blocking is disabled";;
esac
elif grep -q "BLOCKING_ENABLED=true" /etc/pihole/setupVars.conf; then
# Configs are set
case "${1}" in
"web") echo "$port";;
*) echo -e " ${TICK} Pi-hole blocking is enabled";;
esac
else
# No configs were found
case "${1}" in
"web") echo -2;;
*) echo -e " ${INFO} Pi-hole blocking will be enabled";;
esac
# Enable blocking
"${PI_HOLE_BIN_DIR}"/pihole enable
fi
exit 0
}
7 years ago
tailFunc() {
# Warn user if Pi-hole's logging is disabled
local logging_enabled=$(grep -c "^log-queries" /etc/dnsmasq.d/01-pihole.conf)
if [[ "${logging_enabled}" == "0" ]]; then
# No "log-queries" lines are found.
# Commented out lines (such as "#log-queries") are ignored
echo " ${CROSS} Warning: Query logging is disabled"
fi
echo -e " ${INFO} Press Ctrl-C to exit"
# Strip date from each line
# Color blocklist/blacklist/wildcard entries as red
# Color A/AAAA/DHCP strings as white
# Color everything else as gray
tail -f /var/log/pihole/pihole.log | grep --line-buffered "${1}" | sed -E \
-e "s,($(date +'%b %d ')| dnsmasq\[[0-9]*\]),,g" \
-e "s,(.*(blacklisted |gravity blocked ).*),${COL_RED}&${COL_NC}," \
-e "s,.*(query\\[A|DHCP).*,${COL_NC}&${COL_NC}," \
-e "s,.*,${COL_GRAY}&${COL_NC},"
7 years ago
exit 0
}
piholeCheckoutFunc() {
if [[ "$2" == "-h" ]] || [[ "$2" == "--help" ]]; then
echo "Usage: pihole checkout [repo] [branch]
Example: 'pihole checkout master' or 'pihole checkout core dev'
Switch Pi-hole subsystems to a different GitHub branch
Repositories:
core [branch] Change the branch of Pi-hole's core subsystem
web [branch] Change the branch of Web Interface subsystem
ftl [branch] Change the branch of Pi-hole's FTL subsystem
Branches:
master Update subsystems to the latest stable release
dev Update subsystems to the latest development release
branchname Update subsystems to the specified branchname"
exit 0
fi
source "${PI_HOLE_SCRIPT_DIR}"/piholeCheckout.sh
shift
checkout "$@"
}
tricorderFunc() {
local tricorder_token
if [[ ! -p "/dev/stdin" ]]; then
echo -e " ${INFO} Please do not call Tricorder directly"
exit 1
fi
tricorder_token=$(curl --silent --fail --show-error --upload-file "-" https://tricorder.pi-hole.net/upload < /dev/stdin 2>&1)
if [[ "${tricorder_token}" != "https://tricorder.pi-hole.net/"* ]]; then
echo -e "${CROSS} uploading failed, contact Pi-hole support for assistance."
# Log curl error (if available)
if [ -n "${tricorder_token}" ]; then
echo -e "${INFO} Error message: ${COL_RED}${tricorder_token}${COL_NC}\\n"
tricorder_token=""
fi
exit 1
fi
echo "Upload successful, your token is: ${COL_GREEN}${tricorder_token}${COL_NC}"
exit 0
}
updateCheckFunc() {
"${PI_HOLE_SCRIPT_DIR}"/updatecheck.sh "$@"
exit 0
}
unsupportedFunc(){
echo "Function not supported in Docker images"
exit 0
}
helpFunc() {
echo "Usage: pihole [options]
Example: 'pihole -w -h'
Add '-h' after specific commands for more information on usage
Whitelist/Blacklist Options:
-w, whitelist Whitelist domain(s)
-b, blacklist Blacklist domain(s)
--regex, regex Regex blacklist domains(s)
--white-regex Regex whitelist domains(s)
--wild, wildcard Wildcard blacklist domain(s)
--white-wild Wildcard whitelist domain(s)
Add '-h' for more info on whitelist/blacklist usage
Debugging Options:
-d, debug Start a debugging session
Add '-c' or '--check-database' to include a Pi-hole database integrity check
Add '-a' to automatically upload the log to tricorder.pi-hole.net
-f, flush Flush the Pi-hole log
-r, reconfigure Reconfigure or Repair Pi-hole subsystems
-t, tail [arg] View the live output of the Pi-hole log.
Add an optional argument to filter the log
(regular expressions are supported)
Options:
-a, admin Web interface options
Add '-h' for more info on Web Interface usage
-c, chronometer Calculates stats and displays to an LCD
Add '-h' for more info on chronometer usage
-g, updateGravity Update the list of ad-serving domains
-h, --help, help Show this help dialog
-l, logging Specify whether the Pi-hole log should be used
Add '-h' for more info on logging usage
-q, query Query the adlists for a specified domain
Add '-h' for more info on query usage
-up, updatePihole Update Pi-hole subsystems
Add '--check-only' to exit script before update is performed.
-v, version Show installed versions of Pi-hole, Web Interface & FTL
Add '-h' for more info on version usage
uninstall Uninstall Pi-hole from your system
status Display the running status of Pi-hole subsystems
enable Enable Pi-hole subsystems
disable Disable Pi-hole subsystems
Add '-h' for more info on disable usage
restartdns Full restart Pi-hole subsystems
Add 'reload' to update the lists and flush the cache without restarting the DNS server
Add 'reload-lists' to only update the lists WITHOUT flushing the cache or restarting the DNS server
checkout Switch Pi-hole subsystems to a different GitHub branch
Add '-h' for more info on checkout usage
arpflush Flush information stored in Pi-hole's network tables";
exit 0
8 years ago
}
if [[ $# = 0 ]]; then
8 years ago
helpFunc
8 years ago
fi
# functions that do not require sudo power
case "${1}" in
"-h" | "help" | "--help" ) helpFunc;;
"-v" | "version" ) versionFunc "$@";;
"-c" | "chronometer" ) chronometerFunc "$@";;
"-q" | "query" ) queryFunc "$@";;
"status" ) statusFunc "$2";;
"tricorder" ) tricorderFunc;;
# we need to add all arguments that require sudo power to not trigger the * argument
"-w" | "whitelist" ) ;;
"-b" | "blacklist" ) ;;
"--wild" | "wildcard" ) ;;
"--regex" | "regex" ) ;;
"--white-regex" | "white-regex" ) ;;
"--white-wild" | "white-wild" ) ;;
"-f" | "flush" ) ;;
"-up" | "updatePihole" ) ;;
"-r" | "reconfigure" ) ;;
"-g" | "updateGravity" ) ;;
"-l" | "logging" ) ;;
"uninstall" ) ;;
"enable" ) ;;
"disable" ) ;;
"-d" | "debug" ) ;;
"restartdns" ) ;;
"-a" | "admin" ) ;;
"checkout" ) ;;
"updatechecker" ) ;;
"arpflush" ) ;;
"-t" | "tail" ) ;;
* ) helpFunc;;
esac
# Must be root to use this tool
if [[ ! $EUID -eq 0 ]];then
if [[ -x "$(command -v sudo)" ]]; then
exec sudo bash "$0" "$@"
exit $?
else
echo -e " ${CROSS} sudo is needed to run pihole commands. Please run this script as root or install sudo."
exit 1
fi
fi
8 years ago
# Handle redirecting to specific functions based on arguments
case "${1}" in
"-w" | "whitelist" ) listFunc "$@";;
"-b" | "blacklist" ) listFunc "$@";;
"--wild" | "wildcard" ) listFunc "$@";;
"--regex" | "regex" ) listFunc "$@";;
"--white-regex" | "white-regex" ) listFunc "$@";;
"--white-wild" | "white-wild" ) listFunc "$@";;
"-d" | "debug" ) debugFunc "$@";;
"-f" | "flush" ) flushFunc "$@";;
"-up" | "updatePihole" ) updatePiholeFunc "$@";;
8 years ago
"-r" | "reconfigure" ) reconfigurePiholeFunc;;
"-g" | "updateGravity" ) updateGravityFunc "$@";;
"-l" | "logging" ) piholeLogging "$@";;
"uninstall" ) uninstallFunc;;
"enable" ) piholeEnable 1;;
"disable" ) piholeEnable 0 "$2";;
"restartdns" ) restartDNS "$2";;
"-a" | "admin" ) webpageFunc "$@";;
"checkout" ) piholeCheckoutFunc "$@";;
"updatechecker" ) shift; updateCheckFunc "$@";;
"arpflush" ) arpFunc "$@";;
"-t" | "tail" ) tailFunc "$2";;
esac