Kernel initialization. Part 2. ================================================================================ Early interrupt and exception handling -------------------------------------------------------------------------------- In the previous [part](https://0xax.gitbook.io/linux-insides/summary/initialization/linux-initialization-1) we stopped before setting of early interrupt handlers. At this moment we are in the decompressed Linux kernel, we have basic [paging](https://en.wikipedia.org/wiki/Page_table) structure for early boot and our current goal is to finish early preparation before the main kernel code will start to work. We already started to do this preparation in the previous [first](https://0xax.gitbook.io/linux-insides/summary/initialization/linux-initialization-1) part of this [chapter](https://0xax.gitbook.io/linux-insides/summary/initialization). We continue in this part and will know more about interrupt and exception handling. Remember that we stopped before following function: ```C idt_setup_early_handler(); ``` from the [arch/x86/kernel/head64.c](https://github.com/torvalds/linux/blob/master/arch/x86/kernel/head64.c) source code file. But before we start to sort out this function, we need to know about interrupts and handlers. Some theory -------------------------------------------------------------------------------- An interrupt is an event caused by software or hardware to the CPU. For example a user have pressed a key on keyboard. On interrupt, CPU stops the current task and transfer control to the special routine which is called - [interrupt handler](https://en.wikipedia.org/wiki/Interrupt_handler). An interrupt handler handles and interrupt and transfer control back to the previously stopped task. We can split interrupts on three types: * Software interrupts - when a software signals CPU that it needs kernel attention. These interrupts are generally used for system calls; * Hardware interrupts - when a hardware event happens, for example button is pressed on a keyboard; * Exceptions - interrupts generated by CPU, when the CPU detects error, for example division by zero or accessing a memory page which is not in RAM. Every interrupt and exception is assigned a unique number which is called - `vector number`. `Vector number` can be any number from `0` to `255`. There is common practice to use first `32` vector numbers for exceptions, and vector numbers from `32` to `255` are used for user-defined interrupts. CPU uses vector number as an index in the `Interrupt Descriptor Table` (we will see description of it soon). CPU catches interrupts from the [APIC](http://en.wikipedia.org/wiki/Advanced_Programmable_Interrupt_Controller) or through its pins. Following table shows `0-31` exceptions: ``` ---------------------------------------------------------------------------------------------- |Vector|Mnemonic|Description |Type |Error Code|Source | ---------------------------------------------------------------------------------------------- |0 | #DE |Divide Error |Fault|NO |DIV and IDIV | |--------------------------------------------------------------------------------------------- |1 | #DB |Reserved |F/T |NO | | |--------------------------------------------------------------------------------------------- |2 | --- |NMI |INT |NO |external NMI | |--------------------------------------------------------------------------------------------- |3 | #BP |Breakpoint |Trap |NO |INT 3 | |--------------------------------------------------------------------------------------------- |4 | #OF |Overflow |Trap |NO |INTO instruction | |--------------------------------------------------------------------------------------------- |5 | #BR |Bound Range Exceeded|Fault|NO |BOUND instruction | |--------------------------------------------------------------------------------------------- |6 | #UD |Invalid Opcode |Fault|NO |UD2 instruction | |--------------------------------------------------------------------------------------------- |7 | #NM |Device Not Available|Fault|NO |Floating point or [F]WAIT | |--------------------------------------------------------------------------------------------- |8 | #DF |Double Fault |Abort|YES |An instruction which can generate NMI | |--------------------------------------------------------------------------------------------- |9 | --- |Reserved |Fault|NO | | |--------------------------------------------------------------------------------------------- |10 | #TS |Invalid TSS |Fault|YES |Task switch or TSS access | |--------------------------------------------------------------------------------------------- |11 | #NP |Segment Not Present |Fault|NO |Accessing segment register | |--------------------------------------------------------------------------------------------- |12 | #SS |Stack-Segment Fault |Fault|YES |Stack operations | |--------------------------------------------------------------------------------------------- |13 | #GP |General Protection |Fault|YES |Memory reference | |--------------------------------------------------------------------------------------------- |14 | #PF |Page fault |Fault|YES |Memory reference | |--------------------------------------------------------------------------------------------- |15 | --- |Reserved | |NO | | |--------------------------------------------------------------------------------------------- |16 | #MF |x87 FPU fp error |Fault|NO |Floating point or [F]Wait | |--------------------------------------------------------------------------------------------- |17 | #AC |Alignment Check |Fault|YES |Data reference | |--------------------------------------------------------------------------------------------- |18 | #MC |Machine Check |Abort|NO | | |--------------------------------------------------------------------------------------------- |19 | #XM |SIMD fp exception |Fault|NO |SSE[2,3] instructions | |--------------------------------------------------------------------------------------------- |20 | #VE |Virtualization exc. |Fault|NO |EPT violations | |--------------------------------------------------------------------------------------------- |21-31 | --- |Reserved |INT |NO |External interrupts | ---------------------------------------------------------------------------------------------- ``` To react on interrupt CPU uses special structure - Interrupt Descriptor Table or IDT. IDT is an array of 8-byte descriptors like Global Descriptor Table, but IDT entries are called `gates`. CPU multiplies vector number by 8 to find the IDT entry. But in 64-bit mode IDT is an array of 16-byte descriptors and CPU multiplies vector number by 16 to find the entry in the IDT. We remember from the previous part that CPU uses special `GDTR` register to locate Global Descriptor Table, so CPU uses special register `IDTR` for Interrupt Descriptor Table and `lidt` instruction for loading base address of the table into this register. 64-bit mode IDT entry has following structure: ``` 127 96 -------------------------------------------------------------------------------- | | | Reserved | | | -------------------------------------------------------------------------------- 95 64 -------------------------------------------------------------------------------- | | | Offset 63..32 | | | -------------------------------------------------------------------------------- 63 48 47 46 44 42 39 34 32 -------------------------------------------------------------------------------- | | | D | | | | | | | | Offset 31..16 | P | P | 0 |Type |0 0 0 | 0 | 0 | IST | | | | L | | | | | | | -------------------------------------------------------------------------------- 31 16 15 0 -------------------------------------------------------------------------------- | | | | Segment Selector | Offset 15..0 | | | | -------------------------------------------------------------------------------- ``` Where: * `Offset` - is offset to entry point of an interrupt handler; * `DPL` - Descriptor Privilege Level; * `P` - Segment Present flag; * `Segment selector` - a code segment selector in GDT or LDT (actually in linux, it must point to a valid descriptor in your GDT.) ```C #define __KERNEL_CS (GDT_ENTRY_KERNEL_CS*8) // 0000 0000 0001 0000 #define GDT_ENTRY_KERNEL_CS 2 ``` * `IST` - provides ability to switch to a new stack for interrupts handling. And the last `Type` field describes type of the `IDT` entry. There are three different kinds of gates for interrupts: * Task gate * Interrupt gate * Trap gate Interrupt and trap gates contain a far pointer to the entry point of the interrupt handler. Only one difference between these types is how CPU handles `IF` flag. If interrupt handler was accessed through interrupt gate, CPU clear the `IF` flag to prevent other interrupts while current interrupt handler executes. After that current interrupt handler executes, CPU sets the `IF` flag again with `iret` instruction. Other bits in the interrupt descriptor is reserved and must be 0. Now let's look how CPU handles interrupts: * CPU save flags register, `CS`, and instruction pointer on the stack. * If interrupt causes an error code (like `#PF` for example), CPU saves an error on the stack after instruction pointer; * After interrupt handler executes, `iret` instruction will be used to return from it. Now let's back to code. Fill and load IDT -------------------------------------------------------------------------------- We stopped at the following function: ```C idt_setup_early_handler(); ``` `idt_setup_early_handler` is defined in the [arch/x86/kernel/idt.c](https://github.com/torvalds/linux/blob/master/arch/x86/kernel/idt.c) like the following: ```C void __init idt_setup_early_handler(void) { int i; for (i = 0; i < NUM_EXCEPTION_VECTORS; i++) set_intr_gate(i, early_idt_handler_array[i]); load_idt(&idt_descr); } ``` where `NUM_EXCEPTION_VECTORS` expands to `32`. As we can see, We're filling only first 32 `IDT` entries in the loop, because all of the early setup runs with interrupts disabled, so there is no need to set up interrupt handlers for vectors greater than `32`. Here we call `set_intr_gate` in the loop, which takes two parameters: * Number of an interrupt or `vector number`; * Address of the idt handler. and inserts an interrupt gate to the `IDT` table which is represented by the `&idt_descr` array. The `early_idt_handler_array` array is declared in the [arch/x86/include/asm/segment.h](https://github.com/torvalds/linux/blob/master/arch/x86/include/asm/segment.h) header file and contains addresses of the first `32` exception handlers: ```C #define EARLY_IDT_HANDLER_SIZE 9 #define NUM_EXCEPTION_VECTORS 32 extern const char early_idt_handler_array[NUM_EXCEPTION_VECTORS][EARLY_IDT_HANDLER_SIZE]; ``` The `early_idt_handler_array` is `288` bytes array which contains address of exception entry points every nine bytes. Every nine bytes of this array consist of two bytes optional instruction for pushing dummy error code if an exception does not provide it, two bytes instruction for pushing vector number to the stack and five bytes of `jump` to the common exception handler code. You will see more detail in the next paragraph. The `set_intr_gate` function is defined in the [arch/x86/kernel/idt.c](https://github.com/torvalds/linux/blob/master/arch/x86/kernel/idt.c) source file and looks: ```C static void set_intr_gate(unsigned int n, const void *addr) { struct idt_data data; BUG_ON(n > 0xFF); memset(&data, 0, sizeof(data)); data.vector = n; data.addr = addr; data.segment = __KERNEL_CS; data.bits.type = GATE_INTERRUPT; data.bits.p = 1; idt_setup_from_table(idt_table, &data, 1, false); } ``` First of all it checks that passed vector number is not greater than `255` with `BUG_ON` macro. We need to do this because we are limited to have up to `256` interrupts. After this, we fill the idt data with the given arguments and others, which will be passed to `idt_setup_from_table`. The `idt_setup_from_table` function is defined in the same file as the `set_intr_gate` function like the following: ```C static void idt_setup_from_table(gate_desc *idt, const struct idt_data *t, int size, bool sys) { gate_desc desc; for (; size > 0; t++, size--) { desc.offset_low = (u16) t->addr; desc.segment = (u16) t->segment desc.bits = t->bits; desc.offset_middle = (u16) (t->addr >> 16); desc.offset_high = (u32) (t->addr >> 32); desc.reserved = 0; memcpy(&idt[t->vector], &desc, sizeof(desc)); if (sys) set_bit(t->vector, system_vectors); } } ``` which fill temporary idt descriptor with the given arguments and others. And then we just copy it to the certain element of the `idt_table` array. `idt_table` is an array of idt entries: ```C gate_desc idt_table[IDT_ENTRIES] __page_aligned_bss; ``` Now we are moving back to main loop code. After main loop finishes, we can load `Interrupt Descriptor table` with the call of the: ```C load_idt((const struct desc_ptr *)&idt_descr); ``` where `idt_descr` is: ```C struct desc_ptr idt_descr __ro_after_init = { .size = (IDT_ENTRIES * 2 * sizeof(unsigned long)) - 1, .address = (unsigned long) idt_table, }; ``` and `load_idt` just executes `lidt` instruction: ```C asm volatile("lidt %0"::"m" (idt_descr)); ``` Okay, now we have filled and loaded `Interrupt Descriptor Table`, we know how the CPU acts during an interrupt. So now time to deal with interrupts handlers. Early interrupts handlers -------------------------------------------------------------------------------- As you can read above, we filled `IDT` with the address of the `early_idt_handler_array`. In this section, we are going to look into it in detail. We can find it in the [arch/x86/kernel/head_64.S](https://github.com/torvalds/linux/blob/master/arch/x86/kernel/head_64.S) assembly file: ```assembly ENTRY(early_idt_handler_array) i = 0 .rept NUM_EXCEPTION_VECTORS .if ((EXCEPTION_ERRCODE_MASK >> i) & 1) == 0 UNWIND_HINT_IRET_REGS pushq $0 # Dummy error code, to make stack frame uniform .else UNWIND_HINT_IRET_REGS offset=8 .endif pushq $i # 72(%rsp) Vector number jmp early_idt_handler_common UNWIND_HINT_IRET_REGS i = i + 1 .fill early_idt_handler_array + i*EARLY_IDT_HANDLER_SIZE - ., 1, 0xcc .endr UNWIND_HINT_IRET_REGS offset=16 END(early_idt_handler_array) ``` We can see here, interrupt handlers generation for the first `32` exceptions. We check here, if exception has an error code then we do nothing, if exception does not return error code, we push zero to the stack. We do it for that stack was uniform. After that we push `vector number` on the stack and jump on the `early_idt_handler_common` which is generic interrupt handler for now. After all, every nine bytes of the `early_idt_handler_array` array consists of optional push of an error code, push of `vector number` and jump instruction to `early_idt_handler_common`. We can see it in the output of the `objdump` util: ``` $ objdump -D vmlinux ... ... ... ffffffff81fe5000 : ffffffff81fe5000: 6a 00 pushq $0x0 ffffffff81fe5002: 6a 00 pushq $0x0 ffffffff81fe5004: e9 17 01 00 00 jmpq ffffffff81fe5120 ffffffff81fe5009: 6a 00 pushq $0x0 ffffffff81fe500b: 6a 01 pushq $0x1 ffffffff81fe500d: e9 0e 01 00 00 jmpq ffffffff81fe5120 ffffffff81fe5012: 6a 00 pushq $0x0 ffffffff81fe5014: 6a 02 pushq $0x2 ... ... ... ``` As we may know, CPU pushes flag register, `CS` and `RIP` on the stack before calling interrupt handler. So before `early_idt_handler_common` will be executed, stack will contain following data: ``` |--------------------| | %rflags | | %cs | | %rip | | error code | | vector number |<-- %rsp |--------------------| ``` Now let's look on the `early_idt_handler_common` implementation. It locates in the same [arch/x86/kernel/head_64.S](https://github.com/torvalds/linux/blob/master/arch/x86/kernel/head_64.S) assembly file. First of all we increment `early_recursion_flag` to prevent recursion in the `early_idt_handler_common`: ```assembly incl early_recursion_flag(%rip) ``` The `early_recursion_flag` is defined in the same assembly file as the `early_idt_handler_common` symbol as follows: ```assembly early_recursion_flag: .long 0 ``` Next we save general registers on the stack: ```assembly pushq %rsi movq 8(%rsp), %rsi movq %rdi, 8(%rsp) pushq %rdx pushq %rcx pushq %rax pushq %r8 pushq %r9 pushq %r10 pushq %r11 pushq %rbx pushq %rbp pushq %r12 pushq %r13 pushq %r14 pushq %r15 UNWIND_HINT_REGS ``` Okay, now the stack contains following data: ``` High |-------------------------| | %rflags | | %cs | | %rip | | error code | | %rdi | | %rsi | | %rdx | | %rax | | %r8 | | %r9 | | %r10 | | %r11 | | %rbx | | %rbp | | %r12 | | %r13 | | %r14 | | %r15 |<-- %rsp Low |-------------------------| ``` We need to do it to prevent wrong values of registers when we return from the interrupt handler. After this we check the vector number, and if it is `#PF` or [Page Fault](https://en.wikipedia.org/wiki/Page_fault), we put value from the `cr2` to the `rdi` register and call `early_make_pgtable` (we'll see it soon): ```assembly cmpq $14,%rsi /* Page fault? */ jnz 10f GET_CR2_INTO(%rdi) call early_make_pgtable andl %eax,%eax /* It is more efficient, the opcode is shorter than movl 1, %eax, only 2 bytes. */ jz 20f /* All good */ ``` otherwise we call `early_fixup_exception` function by passing kernel stack pointer: ```assembly 10: movq %rsp,%rdi call early_fixup_exception ``` We'll see the implementation of the `early_fixup_exception` function later. ```assembly 20: decl early_recursion_flag(%rip) jmp restore_regs_and_return_to_kernel ``` After we decrement the `early_recursion_flag`, we restore registers which we saved before from the stack and return from the handler with `iretq`. It is the end of the interrupt handler. We will examine the page fault handling and the other exception handling in order. Page fault handling -------------------------------------------------------------------------------- In the previous paragraph we saw the early interrupt handler which checks if the vector number is page fault and calls `early_make_pgtable` for building new page tables if it is. We need to have `#PF` handler in this step because there are plans to add ability to load kernel above `4G` and make access to `boot_params` structure above the 4G. You can find the implementation of `early_make_pgtable` in [arch/x86/kernel/head64.c](https://github.com/torvalds/linux/blob/master/arch/x86/kernel/head64.c) and takes one parameter - the value of `cr2` register, which contains the address caused page fault. Let's look on it: ```C int __init early_make_pgtable(unsigned long address) { unsigned long physaddr = address - __PAGE_OFFSET; pmdval_t pmd; pmd = (physaddr & PMD_MASK) + early_pmd_flags; return __early_make_pgtable(address, pmd); } ``` `__PAGE_OFFSET` is defined in the [arch/x86/include/asm/page_64_types.h](https://elixir.bootlin.com/linux/v3.10-rc1/source/arch/x86/include/asm/page_64_types.h#L33) header file, and the suffix `UL` forces the page offset to be a unsigned long data type. ```C #define __PAGE_OFFSET _AC(0xffff880000000000, UL) ``` And the `_AC` macro is defined in the [include/uapi/linux/const.h](https://elixir.bootlin.com/linux/v3.10-rc1/source/include/uapi/linux/const.h#L16) header file: ```C /* Some constant macros are used in both assembler and * C code. Therefore we cannot annotate them always with * 'UL' and other type specifiers unilaterally. We * use the following macros to deal with this. * * Similarly, _AT() will cast an expression with a type in C, but * leave it unchanged in asm. */ #ifdef __ASSEMBLY__ #define _AC(X,Y) X #else #define __AC(X,Y) (X##Y) #define _AC(X,Y) __AC(X,Y) #endif ``` Where `__PAGE_OFFSET` expands to `0xffff888000000000`. But, why is it possible to translate a virtual address to a physical address by subtracting `__PAGE_OFFSET`? The answer is in the [Documentation/x86/x86_64/mm.rst](https://elixir.bootlin.com/linux/v5.10-rc5/source/Documentation/x86/x86_64/mm.rst#L45) documentation: ``` ... ffff888000000000 | -119.5 TB | ffffc87fffffffff | 64 TB | direct mapping of all physical memory (page_offset_base) ... ``` As explained above, the virtual address space `ffff888000000000-ffffc87fffffffff` is direct mapping of all physical memory. When the kernel wants to access all physical memory, it uses direct mapping. Okay, let's get back to discussing `early_make_pgtable`. We initialize `pmd` and pass it to the `__early_make_pgtable` function along with `address`. The `__early_make_pgtable` function is defined in the same file as the `early_make_pgtable` function as follows: ```C int __init __early_make_pgtable(unsigned long address, pmdval_t pmd) { unsigned long physaddr = address - __PAGE_OFFSET; pgdval_t pgd, *pgd_p; p4dval_t p4d, *p4d_p; pudval_t pud, *pud_p; pmdval_t *pmd_p; ... ... ... } ``` It starts from the definition of some variables which have `*val_t` types. All of these types are declared as alias of `unsigned long` using `typedef`. After we made the check that we have no invalid address, we're getting the address of the Page Global Directory entry which contains base address of Page Upper Directory and put its value to the `pgd` variable: ```C again: pgd_p = &early_top_pgt[pgd_index(address)].pgd; pgd = *pgd_p; ``` And we check if `pgd` is presented. If it is, we assign the base address of the page upper directory table to `pud_p`: ```C pud_p = (pudval_t *)((pgd & PTE_PFN_MASK) + __START_KERNEL_map - phys_base); ``` where `PTE_PFN_MASK` is a macro which mask lower `12` bits of `(pte|pmd|pud|pgd)val_t`. If `pgd` is not presented, we check if `next_early_pgt` is not greater than `EARLY_DYNAMIC_PAGE_TABLES` which is `64` and present a fixed number of buffers to set up new page tables on demand. If `next_early_pgt` is greater than `EARLY_DYNAMIC_PAGE_TABLES` we reset page tables and start again from `again` label. If `next_early_pgt` is less than `EARLY_DYNAMIC_PAGE_TABLES`, we assign the next entry of `early_dynamic_pgts` to `pud_p` and fill whole entry of the page upper directory with `0`, then fill the page global directory entry with the base address and some access rights: ```C if (next_early_pgt >= EARLY_DYNAMIC_PAGE_TABLES) { reset_early_page_tables(); goto again; } pud_p = (pudval_t *)early_dynamic_pgts[next_early_pgt++]; memset(pud_p, 0, sizeof(*pud_p) * PTRS_PER_PUD); *pgd_p = (pgdval_t)pud_p - __START_KERNEL_map + phys_base + _KERNPG_TABLE; ``` And we fix `pud_p` to point to correct entry and assign its value to `pud` with the following: ```C pud_p += pud_index(address); pud = *pud_p; ``` And then we do the same routine as above, but to the page middle directory. In the end we assign the given `pmd` which is passed by the `early_make_pgtable` function to the certain entry of page middle directory which maps kernel text+data virtual addresses: ```C pmd_p[pmd_index(address)] = pmd; ``` After page fault handler finished its work, as a result, `early_top_pgt` contains entries which point to the valid addresses. Other exception handling -------------------------------------------------------------------------------- In early interrupt phase, exceptions other than page fault are handled by `early_fixup_exception` function which is defined in [arch/x86/mm/extable.c](https://github.com/torvalds/linux/blob/master/arch/x86/mm/extable.c) and takes two parameters - pointer to kernel stack which consists of saved registers and vector number: ```C void __init early_fixup_exception(struct pt_regs *regs, int trapnr) { ... ... ... } ``` First of all we need to make some checks as the following: ```C if (trapnr == X86_TRAP_NMI) return; if (early_recursion_flag > 2) goto halt_loop; if (!xen_pv_domain() && regs->cs != __KERNEL_CS) goto fail; ``` Here we just ignore [NMI](https://en.wikipedia.org/wiki/Non-maskable_interrupt) and make sure that we are not in recursive situation. After that, we get into: ```C if (fixup_exception(regs, trapnr)) return; ``` The `fixup_exception` function finds the actual handler and call it. It is defined in the same file as `early_fixup_exception` function as the following: ```C int fixup_exception(struct pt_regs *regs, int trapnr) { const struct exception_table_entry *e; ex_handler_t handler; e = search_exception_tables(regs->ip); if (!e) return 0; handler = ex_fixup_handler(e); return handler(e, regs, trapnr); } ``` The `ex_handler_t` is a type of function pointer, which is defined like: ```C typedef bool (*ex_handler_t)(const struct exception_table_entry *, struct pt_regs *, int) ``` The `search_exception_tables` function looks up the given address in the exception table (i.e. the contents of the ELF section, `__ex_table`). After that, we get the actual address by `ex_fixup_handler` function. At last we call actual handler. For more information about exception table, you can refer to [Documentation/x86/exception-tables.txt](https://github.com/torvalds/linux/blob/master/Documentation/x86/exception-tables.txt). Let's get back to the `early_fixup_exception` function, the next step is: ```C if (fixup_bug(regs, trapnr)) return; ``` The `fixup_bug` function is defined in [arch/x86/kernel/traps.c](https://github.com/torvalds/linux/blob/master/arch/x86/kernel/traps.c). Let's have a look on the function implementation: ```C int fixup_bug(struct pt_regs *regs, int trapnr) { if (trapnr != X86_TRAP_UD) return 0; switch (report_bug(regs->ip, regs)) { case BUG_TRAP_TYPE_NONE: case BUG_TRAP_TYPE_BUG: break; case BUG_TRAP_TYPE_WARN: regs->ip += LEN_UD2; return 1; } return 0; } ``` All what this function does is just returns `1` if the exception is generated because `#UD` (or [Invalid Opcode](https://wiki.osdev.org/Exceptions#Invalid_Opcode)) occurred and the `report_bug` function returns `BUG_TRAP_TYPE_WARN`, otherwise returns `0`. Conclusion -------------------------------------------------------------------------------- This is the end of the second part about Linux kernel insides. If you have questions or suggestions, ping me in twitter [0xAX](https://twitter.com/0xAX), drop me [email](mailto:anotherworldofworld@gmail.com) or just create [issue](https://github.com/0xAX/linux-insides/issues/new). In the next part we will see all steps before kernel entry point - `start_kernel` function. **Please note that English is not my first language and I am really sorry for any inconvenience. If you found any mistakes please send me PR to [linux-insides](https://github.com/0xAX/linux-insides).** Links -------------------------------------------------------------------------------- * [GNU assembly .rept](https://sourceware.org/binutils/docs-2.23/as/Rept.html) * [APIC](http://en.wikipedia.org/wiki/Advanced_Programmable_Interrupt_Controller) * [NMI](http://en.wikipedia.org/wiki/Non-maskable_interrupt) * [Page table](https://en.wikipedia.org/wiki/Page_table) * [Interrupt handler](https://en.wikipedia.org/wiki/Interrupt_handler) * [Page Fault](https://en.wikipedia.org/wiki/Page_fault), * [Previous part](https://0xax.gitbook.io/linux-insides/summary/initialization/linux-initialization-1)