we exit from the `reserve_ebda_region` function if paravirtualization is enabled because if it enabled the extended bios data area is absent. In the next step we need to get the end of the low memory:
we exit from the `reserve_ebda_region` function if paravirtualization is enabled because if it enabled the extended BIOS data area is absent. In the next step we need to get the end of the low memory:
```C
lowmem = *(unsigned short *)__va(BIOS_LOWMEM_KILOBYTES);
@ -205,7 +205,7 @@ static inline unsigned int get_bios_ebda(void)
}
```
Let's try to understand how it works. Here we can see that we converting physical address `0x40E` to the virtual, where `0x0040:0x000e` is the segment which contains base address of the extended BIOS data area. Don't worry that we are using `phys_to_virt` function for converting a physical address to virtual address. You can note that previously we have used `__va` macro for the same point, but `phys_to_virt` is the same:
Let's try to understand how it works. Here we can see that we are converting physical address `0x40E` to the virtual, where `0x0040:0x000e` is the segment which contains base address of the extended BIOS data area. Don't worry that we are using `phys_to_virt` function for converting a physical address to virtual address. You can note that previously we have used `__va` macro for the same point, but `phys_to_virt` is the same:
or 128 kilobytes. In the last step we get lower part in the low memory and extended bios data area and call `memblock_reserve` function which will reserve memory region for extended bios data between low memory and one megabyte mark:
or 128 kilobytes. In the last step we get lower part in the low memory and extended BIOS data area and call `memblock_reserve` function which will reserve memory region for extended BIOS data between low memory and one megabyte mark:
```C
lowmem = min(lowmem, ebda_addr);
@ -260,7 +260,7 @@ and reserves memory region for the given base address and size. `memblock_reserv
First touch of the linux kernel memory manager framework
In the previous paragraph we stopped at the call of the `memblock_reserve` function and as i said before it is the first function from the memory manager framework. Let's try to understand how it works. `memblock_reserve` function just calls:
In the previous paragraph we stopped at the call of the `memblock_reserve` function and as I said before it is the first function from the memory manager framework. Let's try to understand how it works. `memblock_reserve` function just calls:
After this we will have first reserved `memblock` for the extended bios data area in the `.meminit.data` section. `reserve_ebda_region` function finished its work on this step and we can go back to the [arch/x86/kernel/head64.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/kernel/head64.c).
After this we will have first reserved `memblock` for the extended BIOS data area in the `.meminit.data` section. `reserve_ebda_region` function finished its work on this step and we can go back to the [arch/x86/kernel/head64.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/kernel/head64.c).
We finished all preparations before the kernel entry point! The last step in the `x86_64_start_reservations` function is the call of the:
If you have read the previous part - [Last preparations before the kernel entry point](https://github.com/0xAX/linux-insides/blob/master/Initialization/linux-initialization-3.md), you can remember that we finished all pre-initialization stuff and stopped right before the call to the `start_kernel` function from the [init/main.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/init/main.c). The `start_kernel` is the entry of the generic and architecture independent kernel code, although we will return to the `arch/` folder many times. If you look inside of the `start_kernel` function, you will see that this function is very big. For this moment it contains about `86`calls of functions. Yes, it's very big and of course this part will not cover all the processes that occur in this function. In the current part we will only start to do it. This part and all the next which will be in the [Kernel initialization process](https://github.com/0xAX/linux-insides/blob/master/Initialization/README.md) chapter will cover it.
If you have read the previous part - [Last preparations before the kernel entry point](https://github.com/0xAX/linux-insides/blob/master/Initialization/linux-initialization-3.md), you can remember that we finished all pre-initialization stuff and stopped right before the call to the `start_kernel` function from the [init/main.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/init/main.c). The `start_kernel` is the entry of the generic and architecture independent kernel code, although we will return to the `arch/` folder many times. If you look inside of the `start_kernel` function, you will see that this function is very big. For this moment it contains about `86` function calls. Yes, it's very big and of course this part will not cover all the processes that occur in this function. In the current part we will only start to do it. This part and all the next which will be in the [Kernel initialization process](https://github.com/0xAX/linux-insides/blob/master/Initialization/README.md) chapter will cover it.
The main purpose of the `start_kernel` to finish kernel initialization process and launch the first `init` process. Before the first process will be started, the `start_kernel` must do many things such as: to enable [lock validator](https://www.kernel.org/doc/Documentation/locking/lockdep-design.txt), to initialize processor id, to enable early [cgroups](http://en.wikipedia.org/wiki/Cgroups) subsystem, to setup per-cpu areas, to initialize different caches in [vfs](http://en.wikipedia.org/wiki/Virtual_file_system), to initialize memory manager, rcu, vmalloc, scheduler, IRQs, ACPI and many many more. Only after these steps will we see the launch of the first `init` process in the last part of this chapter. So much kernel code awaits us, let's start.
@ -272,7 +272,7 @@ Yes, it looks a little strange but it's easy. First of all we can see the defini
DECLARE_PER_CPU_READ_MOSTLY(int, cpu_number);
```
In the next step we call `__verify_pcpu_ptr` with the address of `cpu_number`. `__veryf_pcpu_ptr` used to verify that the given parameter is a per-cpu pointer. After that we set `pscr_ret__` value which depends on the size of the variable. Our `common_cpu` variable is `int`, so it 4 bytes in size. It means that we will get `this_cpu_read_4(common_cpu)` in `pscr_ret__`. In the end of the `__pcpu_size_call_return` we just call it. `this_cpu_read_4` is a macro:
In the next step we call `__verify_pcpu_ptr` with the address of `cpu_number`. `__veryf_pcpu_ptr` used to verify that the given parameter is a per-cpu pointer. After that we set `pscr_ret__` value which depends on the size of the variable. Our `common_cpu` variable is `int`, so it's 4 bytes in size. It means that we will get `this_cpu_read_4(common_cpu)` in `pscr_ret__`. In the end of the `__pcpu_size_call_return` we just call it. `this_cpu_read_4` is a macro:
@ -165,7 +165,7 @@ The next step is initialization of early `ioremap`. In general there are two way
We already saw first method (`outb/inb` instructions) in the part about linux kernel booting [process](https://0xax.gitbook.io/linux-insides/summary/booting/linux-bootstrap-3). The second method is to map I/O physical addresses to virtual addresses. When a physical address is accessed by the CPU, it may refer to a portion of physical RAM which can be mapped on memory of the I/O device. So `ioremap` used to map device memory into kernel address space.
As i wrote above next function is the `early_ioremap_init` which re-maps I/O memory to kernel address space so it can access it. We need to initialize early ioremap for early initialization code which needs to temporarily map I/O or memory regions before the normal mapping functions like `ioremap` are available. Implementation of this function is in the [arch/x86/mm/ioremap.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/mm/ioremap.c). At the start of the `early_ioremap_init` we can see definition of the `pmd` pointer with `pmd_t` type (which presents page middle directory entry `typedef struct { pmdval_t pmd; } pmd_t;` where `pmdval_t` is `unsigned long`) and make a check that `fixmap` aligned in a correct way:
As I wrote above next function is the `early_ioremap_init` which re-maps I/O memory to kernel address space so it can access it. We need to initialize early ioremap for early initialization code which needs to temporarily map I/O or memory regions before the normal mapping functions like `ioremap` are available. Implementation of this function is in the [arch/x86/mm/ioremap.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/mm/ioremap.c). At the start of the `early_ioremap_init` we can see definition of the `pmd` pointer with `pmd_t` type (which presents page middle directory entry `typedef struct { pmdval_t pmd; } pmd_t;` where `pmdval_t` is `unsigned long`) and make a check that `fixmap` aligned in a correct way:
```C
pmd_t *pmd;
@ -457,7 +457,7 @@ where `mm_rb` is a red-black tree of the virtual memory areas, `pgd` is a pointe
bss_resource.end = __pa_symbol(__bss_stop)-1;
```
We already know a little about `resource` structure (read above). Here we fills code/data/bss resources with their physical addresses. You can see it in the `/proc/iomem`:
We already know a little about `resource` structure (read above). Here we fill code/data/bss resources with their physical addresses. You can see it in the `/proc/iomem`:
It is the end of the fifth part about linux kernel initialization process. In this part we continued to dive in the `setup_arch` function which makes initialization of architecture-specific stuff. It was long part, but we have not finished with it. As i already wrote, the `setup_arch` is big function, and I am really not sure that we will cover all of it even in the next part. There were some new interesting concepts in this part like `Fix-mapped` addresses, ioremap and etc... Don't worry if they are unclear for you. There is a special part about these concepts - [Linux kernel memory management Part 2.](https://github.com/0xAX/linux-insides/blob/master/MM/linux-mm-2.md). In the next part we will continue with the initialization of the architecture-specific stuff and will see parsing of the early kernel parameters, early dump of the pci devices, `Desktop Management Interface` scanning and many many more.
It is the end of the fifth part about linux kernel initialization process. In this part we continued to dive in the `setup_arch` function which makes initialization of architecture-specific stuff. It was long part, but we are not finished with it. As I already wrote, the `setup_arch` is big function, and I am really not sure that we will cover all of it even in the next part. There were some new interesting concepts in this part like `Fix-mapped` addresses, ioremap and etc... Don't worry if they are unclear for you. There is a special part about these concepts - [Linux kernel memory management Part 2.](https://github.com/0xAX/linux-insides/blob/master/MM/linux-mm-2.md). In the next part we will continue with the initialization of the architecture-specific stuff and will see parsing of the early kernel parameters, early dump of the pci devices, `Desktop Management Interface` scanning and many many more.
If you have any questions or suggestions write me a comment or ping me at [twitter](https://twitter.com/0xAX).
So, if `CONFIG_PCI` option is set and we passed `pci=earlydump` option to the kernel command line, next function which will be called - `early_dump_pci_devices` from the [arch/x86/pci/early.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/pci/early.c). This function checks `noearly`pci parameter with:
So, if `CONFIG_PCI` option is set and we passed `pci=earlydump` option to the kernel command line, next function which will be called - `early_dump_pci_devices` from the [arch/x86/pci/early.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/pci/early.c). This function checks `noearly`PCI parameter with:
```C
if (!early_pci_allowed())
@ -208,7 +208,7 @@ After the `early_dump_pci_devices`, there are a couple of function related with
early_reserve_e820_mpc_new();
```
Let's look on it. As you can see the first function is `e820_reserve_setup_data`. This function does almost the same as `memblock_x86_reserve_range_setup_data` which we saw above, but it also calls `e820_update_range` which adds new regions to the `e820map` with the given type which is `E820_RESERVED_KERN` in our case. The next function is `finish_e820_parsing` which sanitizes `e820map` with the `sanitize_e820_map` function. Besides this two functions we can see a couple of functions related to the [e820](http://en.wikipedia.org/wiki/E820). You can see it in the listing above. `e820_add_kernel_range` function takes the physical address of the kernel start and end:
Let's look at it. As you can see the first function is `e820_reserve_setup_data`. This function does almost the same as `memblock_x86_reserve_range_setup_data` which we saw above, but it also calls `e820_update_range` which adds new regions to the `e820map` with the given type which is `E820_RESERVED_KERN` in our case. The next function is `finish_e820_parsing` which sanitizes `e820map` with the `sanitize_e820_map` function. Besides this two functions we can see a couple of functions related to the [e820](http://en.wikipedia.org/wiki/E820). You can see it in the listing above. `e820_add_kernel_range` function takes the physical address of the kernel start and end:
```C
u64 start = __pa_symbol(_text);
@ -356,7 +356,7 @@ RESERVE_BRK(dmi_alloc, 65536);
#endif
```
`RESERVE_BRK` defined in the [arch/x86/include/asm/setup.h](http://en.wikipedia.org/wiki/Desktop_Management_Interface) and reserves space with given size in the `brk` section.
`RESERVE_BRK` defined in the [arch/x86/include/asm/setup.h](http://github.com/torvalds/linux/blob/master/arch/x86/include/asm/setup.h) and reserves space with given size in the `brk` section.
@ -189,7 +189,7 @@ The next step is the call of the function - `x86_init.paging.pagetable_init`. If
#define native_pagetable_init paging_init
```
which expands as you can see to the call of the `paging_init` function from the [arch/x86/mm/init_64.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/mm/init_64.c). The `paging_init` function initializes sparse memory and zone sizes. First of all what's zones and what is it `Sparsemem`. The `Sparsemem` is a special foundation in the linux kernel memory manager which used to split memory area into different memory banks in the [NUMA](http://en.wikipedia.org/wiki/Non-uniform_memory_access) systems. Let's look on the implementation of the `paginig_init` function:
which expands as you can see to the call of the `paging_init` function from the [arch/x86/mm/init_64.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/arch/x86/mm/init_64.c). The `paging_init` function initializes sparse memory and zone sizes. First of all what's zones and what is it `Sparsemem`. The `Sparsemem` is a special foundation in the linux kernel memory manager which used to split memory area into different memory banks in the [NUMA](http://en.wikipedia.org/wiki/Non-uniform_memory_access) systems. Let's look on the implementation of the `paging_init` function:
```C
void __init paging_init(void)
@ -325,7 +325,7 @@ Here we can see that multiprocessor configuration was found in the `smp_scan_con
Here we are getting to the end of the `setup_arch` function. The rest of function of course is important, but details about these stuff will not will not be included in this part. We will just take a short look on these functions, because although they are important as I wrote above, but they cover non-generic kernel features related with the `NUMA`, `SMP`, `ACPI` and `APICs`, etc. First of all, the next call of the `init_apic_mappings` function. As we can understand this function sets the address of the local [APIC](http://en.wikipedia.org/wiki/Advanced_Programmable_Interrupt_Controller). The next is `x86_io_apic_ops.init` and this function initializes I/O APIC. Please note that we will see all details related with `APIC` in the chapter about interrupts and exceptions handling. In the next step we reserve standard I/O resources like `DMA`, `TIMER`, `FPU`, etc., with the call of the `x86_init.resources.reserve_resources` function. Following is `mcheck_init` function initializes `Machine check Exception` and the last is `register_refined_jiffies` which registers [jiffy](http://en.wikipedia.org/wiki/Jiffy_%28time%29) (There will be separate chapter about timers in the kernel).
Here we are getting to the end of the `setup_arch` function. The rest of function of course is important, but details about these stuff will not will not be included in this part. We will just take a short look on these functions, because although they are important as I wrote above, they cover non-generic kernel features related with the `NUMA`, `SMP`, `ACPI` and `APICs`, etc. First of all, the next call of the `init_apic_mappings` function. As we can understand this function sets the address of the local [APIC](http://en.wikipedia.org/wiki/Advanced_Programmable_Interrupt_Controller). The next is `x86_io_apic_ops.init` and this function initializes I/O APIC. Please note that we will see all details related with `APIC` in the chapter about interrupts and exceptions handling. In the next step we reserve standard I/O resources like `DMA`, `TIMER`, `FPU`, etc., with the call of the `x86_init.resources.reserve_resources` function. Following is `mcheck_init` function initializes `Machine check Exception` and the last is `register_refined_jiffies` which registers [jiffy](http://en.wikipedia.org/wiki/Jiffy_%28time%29) (There will be separate chapter about timers in the kernel).
So that's all. Finally we have finished with the big `setup_arch` function in this part. Of course as I already wrote many times, we did not see full details about this function, but do not worry about it. We will be back more than once to this function from different chapters for understanding how different platform-dependent parts are initialized.
The `get_cpu_gdt_table` uses `per_cpu` macro for getting value of a `gdt_page` percpu variable for the given CPU number (bootstrap processor with `id` - 0 in our case).
You may ask the following question: so, if we can access `gdt_page` percpu variable, where it was defined? Actually we already saw it in this book. If you have read the first [part](https://0xax.gitbook.io/linux-insides/summary/initialization/linux-initialization-1) of this chapter, you can remember that we saw definition of the `gdt_page` in the [arch/x86/kernel/head_64.S](https://github.com/0xAX/linux/blob/0a07b238e5f488b459b6113a62e06b6aab017f71/arch/x86/kernel/head_64.S):
You may ask the following question: so, if we can access `gdt_page` percpu variable, where was it defined? Actually we already saw it in this book. If you have read the first [part](https://0xax.gitbook.io/linux-insides/summary/initialization/linux-initialization-1) of this chapter, you can remember that we saw definition of the `gdt_page` in the [arch/x86/kernel/head_64.S](https://github.com/0xAX/linux/blob/0a07b238e5f488b459b6113a62e06b6aab017f71/arch/x86/kernel/head_64.S):
The base address of the `percpu` area must contain `gs` register (or `fs` register for `x86`), so we are using `loadsegment` macro and pass `gs`. In the next step we writes the base address if the [IRQ](http://en.wikipedia.org/wiki/Interrupt_request_%28PC_architecture%29) stack and setup stack [canary](http://en.wikipedia.org/wiki/Buffer_overflow_protection) (this is only for `x86_32`). After we load new `GDT`, we fill `cpu_callout_mask` bitmap with the current cpu and set cpu state as online with the setting `cpu_state` percpu variable for the current processor - `CPU_ONLINE`:
The base address of the `percpu` area must contain `gs` register (or `fs` register for `x86`), so we are using `loadsegment` macro and pass `gs`. In the next step we write the base address if the [IRQ](http://en.wikipedia.org/wiki/Interrupt_request_%28PC_architecture%29) stack and setup stack [canary](http://en.wikipedia.org/wiki/Buffer_overflow_protection) (this is only for `x86_32`). After we load new `GDT`, we fill `cpu_callout_mask` bitmap with the current cpu and set cpu state as online with the setting `cpu_state` percpu variable for the current processor - `CPU_ONLINE`:
```C
cpumask_set_cpu(me, cpu_callout_mask);
per_cpu(cpu_state, me) = CPU_ONLINE;
```
So, what is `cpu_callout_mask` bitmap... As we initialized bootstrap processor (processor which is booted the first on `x86`) the other processors in a multiprocessor system are known as `secondary processors`. Linux kernel uses following two bitmasks:
So, what is `cpu_callout_mask` bitmap? As we initialized bootstrap processor (processor which is booted the first on `x86`) the other processors in a multiprocessor system are known as `secondary processors`. Linux kernel uses following two bitmasks:
* `cpu_callout_mask`
* `cpu_callin_mask`
After bootstrap processor initialized, it updates the `cpu_callout_mask` to indicate which secondary processor can be initialized next. All other or secondary processors can do some initialization stuff before and check the `cpu_callout_mask` on the bootstrap processor bit. Only after the bootstrap processor filled the `cpu_callout_mask` with this secondary processor, it will continue the rest of its initialization. After that the certain processor finish its initialization process, the processor sets bit in the `cpu_callin_mask`. Once the bootstrap processor finds the bit in the `cpu_callin_mask` for the current secondary processor, this processor repeats the same procedure for initialization of one of the remaining secondary processors. In a short words it works as i described, but we will see more details in the chapter about `SMP`.
After bootstrap processor initialized, it updates the `cpu_callout_mask` to indicate which secondary processor can be initialized next. All other or secondary processors can do some initialization stuff before and check the `cpu_callout_mask` on the bootstrap processor bit. Only after the bootstrap processor filled the `cpu_callout_mask` with this secondary processor, it will continue the rest of its initialization. After that the certain processor finish its initialization process, the processor sets bit in the `cpu_callin_mask`. Once the bootstrap processor finds the bit in the `cpu_callin_mask` for the current secondary processor, this processor repeats the same procedure for initialization of one of the remaining secondary processors. In a short words it works as I described, but we will see more details in the chapter about `SMP`.
In the next step we can see the call of the `build_all_zonelists` function. This function sets up the order of zones that allocations are preferred from. What are zones and what's order we will understand soon. For the start let's see how linux kernel considers physical memory. Physical memory is split into banks which are called - `nodes`. If you has no hardware support for `NUMA`, you will see only one node:
In the next step we can see the call of the `build_all_zonelists` function. This function sets up the order of zones that allocations are preferred from. What are zones and what's order we will understand soon. For the start let's see how linux kernel considers physical memory. Physical memory is split into banks which are called - `nodes`. If you have no hardware support for `NUMA`, you will see only one node:
```
$ cat /sys/devices/system/node/node0/numastat
@ -185,7 +185,7 @@ As I wrote above all nodes are described with the `pglist_data` or `pg_data_t` s
The rest of the stuff before scheduler initialization
Before we will start to dive into linux kernel scheduler initialization process we must do a couple of things. The first thing is the `page_alloc_init` function from the [mm/page_alloc.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/mm/page_alloc.c). This function looks pretty easy:
Before we start to dive into linux kernel scheduler initialization process we must do a couple of things. The first thing is the `page_alloc_init` function from the [mm/page_alloc.c](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/mm/page_alloc.c). This function looks pretty easy:
The number of elements of the `pid_hash` depends on the `RAM` configuration, but it can be between `2^4` and `2^12`. The `pidhash_init` computes the size
and allocates the required storage (which is `hlist` in our case - the same as [doubly linked list](https://0xax.gitbook.io/linux-insides/summary/datastructures/linux-datastructures-1), but contains one pointer instead on the [struct hlist_head](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/include/linux/types.h)]. The `alloc_large_system_hash` function allocates a large system hash table with `memblock_virt_alloc_nopanic` if we pass `HASH_EARLY` flag (as it in our case) or with `__vmalloc` if we did no pass this flag.
and allocates the required storage (which is `hlist` in our case - the same as [doubly linked list](https://0xax.gitbook.io/linux-insides/summary/datastructures/linux-datastructures-1), but contains one pointer instead on the [struct hlist_head](https://github.com/torvalds/linux/blob/16f73eb02d7e1765ccab3d2018e0bd98eb93d973/include/linux/types.h). The `alloc_large_system_hash` function allocates a large system hash table with `memblock_virt_alloc_nopanic` if we pass `HASH_EARLY` flag (as it in our case) or with `__vmalloc` if we did no pass this flag.
The result we can see in the `dmesg` output:
@ -255,7 +255,7 @@ pgtable_init();
vmalloc_init();
```
The first is `page_ext_init_flatmem` which depends on the `CONFIG_SPARSEMEM` kernel configuration option and initializes extended data per page handling. The `mem_init` releases all `bootmem`, the `kmem_cache_init` initializes kernel cache, the `percpu_init_late` - replaces `percpu` chunks with those allocated by [slub](http://en.wikipedia.org/wiki/SLUB_%28software%29), the `pgtable_init` - initializes the `page->ptl` kernel cache, the `vmalloc_init` - initializes `vmalloc`. Please, **NOTE** that we will not dive into details about all of these functions and concepts, but we will see all of they it in the [Linux kernel memory manager](https://0xax.gitbook.io/linux-insides/summary/mm) chapter.
The first is `page_ext_init_flatmem` which depends on the `CONFIG_SPARSEMEM` kernel configuration option and initializes extended data per page handling. The `mem_init` releases all `bootmem`, the `kmem_cache_init` initializes kernel cache, the `percpu_init_late` - replaces `percpu` chunks with those allocated by [slub](http://en.wikipedia.org/wiki/SLUB_%28software%29), the `pgtable_init` - initializes the `page->ptl` kernel cache, the `vmalloc_init` - initializes `vmalloc`. Please, **NOTE** that we will not dive into details about all of these functions and concepts, but we will see all of them it in the [Linux kernel memory manager](https://0xax.gitbook.io/linux-insides/summary/mm) chapter.
That's all. Now we can look on the `scheduler`.
@ -499,7 +499,7 @@ struct task_struct {
}
```
The first one is `dynamic priority` which can't be changed during lifetime of a process based on its static priority and interactivity of the process. The `static_prio` contains initial priority most likely well-known to you `nice value`. This value does not changed by the kernel if a user will not change it. The last one is `normal_priority` based on the value of the `static_prio` too, but also it depends on the scheduling policy of a process.
The first one is `dynamic priority` which can't be changed during lifetime of a process based on its static priority and interactivity of the process. The `static_prio` contains initial priority most likely well-known to you `nice value`. This value is not changed by the kernel if a user does not change it. The last one is `normal_priority` based on the value of the `static_prio` too, but also it depends on the scheduling policy of a process.
So the main goal of the `set_load_weight` function is to initialize `load_weight` fields for the `init` task:
The next step is [RCU](http://en.wikipedia.org/wiki/Read-copy-update) initialization with the `rcu_init` function and it's implementation depends on two kernel configuration options:
The next step is [RCU](http://en.wikipedia.org/wiki/Read-copy-update) initialization with the `rcu_init` function and its implementation depends on two kernel configuration options:
About this states you can read [here](http://lwn.net/Articles/264090/). As I wrote above we need to initialize `rcu_state` structures and `rcu_init_one` function will help us with it. After the `rcu_state` initialization, we can see the call of the ` __rcu_init_preempt` which depends on the `CONFIG_PREEMPT_RCU` kernel configuration option. It does the same as previous functions - initialization of the `rcu_preempt_state` structure with the `rcu_init_one` function which has `rcu_state` type. After this, in the `rcu_init`, we can see the call of the:
About these states you can read [here](http://lwn.net/Articles/264090/). As I wrote above we need to initialize `rcu_state` structures and `rcu_init_one` function will help us with it. After the `rcu_state` initialization, we can see the call of the ` __rcu_init_preempt` which depends on the `CONFIG_PREEMPT_RCU` kernel configuration option. It does the same as previous functions - initialization of the `rcu_preempt_state` structure with the `rcu_init_one` function which has `rcu_state` type. After this, in the `rcu_init`, we can see the call of the:
0xAX
2 years ago
committed by