Actuall default maximum number of the legacy interrupts represtented by the `NR_IRQ_LEGACY` macro from the [arch/x86/include/asm/irq_vectors.h](https://github.com/torvalds/linux/blob/master/arch/x86/include/asm/irq_vectors.h):
Actuall default maximum number of the legacy interrupts represented by the `NR_IRQ_LEGACY` macro from the [arch/x86/include/asm/irq_vectors.h](https://github.com/torvalds/linux/blob/master/arch/x86/include/asm/irq_vectors.h):
```C
#define NR_IRQS_LEGACY 16
@ -107,7 +107,7 @@ In the loop we are accessing the `vecto_irq` per-cpu array with the `per_cpu` ma
Why is `0x30` here? You can remember from the first [part](http://0xax.gitbooks.io/linux-insides/content/interrupts/interrupts-1.html) of this chapter that first 32 vector numbers from `0` to `31` are reserved by the processor and used for the processing of architecture-defined exceptions and interrupts. Vector numbers from `0x30` to `0x3f` are reserved for the [ISA](https://en.wikipedia.org/wiki/Industry_Standard_Architecture). So, it means that we fill the `vector_irq` from the `IRQ0_VECTOR` which is equal to the `32` to the `IRQ0_VECTOR + 16` (before the `0x30`).
In the end of the `init_IRQ` functio we can see the call of the following function:
In the end of the `init_IRQ` function we can see the call of the following function:
```C
x86_init.irqs.intr_init();
@ -161,7 +161,7 @@ $ cat /proc/interrupts
8: 1 0 0 0 0 0 0 0 IO-APIC 8-edge rtc0
```
look on the last columnt;
look on the last column;
* `(*irq_mask)(struct irq_data *data)` - mask an interrupt source;
* `(*irq_ack)(struct irq_data *data)` - start of a new interrupt;
The `init_8259A` function defined in the same source code file and executes initialization of the [Intel 8259](https://en.wikipedia.org/wiki/Intel_8259) ``Programmable Interrupt Controller` (more about it will be in the separate chapter abot `Programmable Interrupt Controllers` and `APIC`).
Now we can return to the `native_init_IRQ` function, after the `init_ISA_irqs` function finished its work. The next step is the call of the `apic_intr_init` function that allocates special interrupt gates which are used by the [SMP](https://en.wikipedia.org/wiki/Symmetric_multiprocessing) architecture for the [Inter-processor interrupt](https://en.wikipedia.org/wiki/Inter-processor_interrupt). The `alloc_intr_gate` macro from the [arch/x86/include/asm/desc.h](https://github.com/torvalds/linux/blob/master/arch/x86/include/asm/desc.h) used for the interrupt descriptor allocation allocation:
Now we can return to the `native_init_IRQ` function, after the `init_ISA_irqs` function finished its work. The next step is the call of the `apic_intr_init` function that allocates special interrupt gates which are used by the [SMP](https://en.wikipedia.org/wiki/Symmetric_multiprocessing) architecture for the [Inter-processor interrupt](https://en.wikipedia.org/wiki/Inter-processor_interrupt). The `alloc_intr_gate` macro from the [arch/x86/include/asm/desc.h](https://github.com/torvalds/linux/blob/master/arch/x86/include/asm/desc.h) used for the interrupt descriptor allocation:
```C
#define alloc_intr_gate(n, addr) \
@ -351,7 +351,7 @@ movl %eax, %edi
call variable_test_bit
```
for the `variable_test_bit`. These two code listings starts with the same part, first of all we save base of the current stack frame in the `%rbp` register. But after this code for both examples is different. In the first example we put `$268435456` (here the `$268435456` is our second parameter - `0x10000000`) to the `esi` and `$25` (our first parameter) to the `edi` register and call `constant_test_bit`. We put functuin parameters to the `esi` and `edi` registers because as we are learning Linux kernel for the `x86_64` architecture we use `System V AMD64 ABI` [calling convention](https://en.wikipedia.org/wiki/X86_calling_conventions). All is pretty simple. When we are using predifined constant, the compiler can just substitute its value. Now let's look on the second part. As you can see here, the compiler can not substitute value from the `nr` variable. In this case compiler must calcuate its offset on the programm's [stack frame](https://en.wikipedia.org/wiki/Call_stack). We substract `16` from the `rsp` register to allocate stack for the local variables data and put the `$24` (value of the `nr` variable) to the `rbp` with offset `-4`. Our stack frame will be like this:
for the `variable_test_bit`. These two code listings starts with the same part, first of all we save base of the current stack frame in the `%rbp` register. But after this code for both examples is different. In the first example we put `$268435456` (here the `$268435456` is our second parameter - `0x10000000`) to the `esi` and `$25` (our first parameter) to the `edi` register and call `constant_test_bit`. We put functuin parameters to the `esi` and `edi` registers because as we are learning Linux kernel for the `x86_64` architecture we use `System V AMD64 ABI` [calling convention](https://en.wikipedia.org/wiki/X86_calling_conventions). All is pretty simple. When we are using predefined constant, the compiler can just substitute its value. Now let's look on the second part. As you can see here, the compiler can not substitute value from the `nr` variable. In this case compiler must calculate its offset on the programm's [stack frame](https://en.wikipedia.org/wiki/Call_stack). We substract `16` from the `rsp` register to allocate stack for the local variables data and put the `$24` (value of the `nr` variable) to the `rbp` with offset `-4`. Our stack frame will be like this:
Where the `spurious_interrupt` function represent interrupt handler fro the `spurious` interrupt. Here the `used_vectors` is the `unsigned long` that contains already initialized interrupt gates. We already filled first `32` interrupt vectors in the `trap_init` function from the [arch/x86/kernel/setup.c](https://github.com/torvalds/linux/blob/master/arch/x86/kernel/setup.c) source code file:
Where the `spurious_interrupt` function represent interrupt handler for the `spurious` interrupt. Here the `used_vectors` is the `unsigned long` that contains already initialized interrupt gates. We already filled first `32` interrupt vectors in the `trap_init` function from the [arch/x86/kernel/setup.c](https://github.com/torvalds/linux/blob/master/arch/x86/kernel/setup.c) source code file:
```C
for (i = 0; i <FIRST_EXTERNAL_VECTOR;i++)
@ -414,7 +414,7 @@ First of all let's deal with the condition. The `acpi_ioapic` variable represent
#define acpi_ioapic 0
```
The second condition - `!of_ioapic && nr_legacy_irqs()` checks that we do not use [Open Firmware](https://en.wikipedia.org/wiki/Open_Firmware) `I/O APIC` and legacy interrupt controller. We already know about the `nr_legacy_irqs`. The second is `of_ioapic` variable defined in the [arch/x86/kernel/devicetree.c](https://github.com/torvalds/linux/blob/master/arch/x86/kernel/devicetree.c) and initialized in the `dtb_ioapic_setup` function that build information about `APICs` in the [devicetree](https://en.wikipedia.org/wiki/Device_tree). Note that `of_ioapic` variable depends on the `CONFIG_OF` Linux kernel configuration opiotn. If this option is not set, the value of the `of_ioapic` will be zero too:
The second condition - `!of_ioapic && nr_legacy_irqs()` checks that we do not use [Open Firmware](https://en.wikipedia.org/wiki/Open_Firmware) `I/O APIC` and legacy interrupt controller. We already know about the `nr_legacy_irqs`. The second is `of_ioapic` variable defined in the [arch/x86/kernel/devicetree.c](https://github.com/torvalds/linux/blob/master/arch/x86/kernel/devicetree.c) and initialized in the `dtb_ioapic_setup` function that build information about `APICs` in the [devicetree](https://en.wikipedia.org/wiki/Device_tree). Note that `of_ioapic` variable depends on the `CONFIG_OF` Linux kernel configuration option. If this option is not set, the value of the `of_ioapic` will be zero too:
Some time ago interrupt controller consisted of two chips and one was connected to second. The second chip that was connected to the first chip via this `IRQ 2` line. This chip serviced lines from `8` to `15` and after after this lines of the first chip. So, for example [Intel 8259A](https://en.wikipedia.org/wiki/Intel_8259) has following lines:
Some time ago interrupt controller consisted of two chips and one was connected to second. The second chip that was connected to the first chip via this `IRQ 2` line. This chip serviced lines from `8` to `15` and after this lines of the first chip. So, for example [Intel 8259A](https://en.wikipedia.org/wiki/Intel_8259) has following lines:
spacewander
8 years ago